USGS Science⌕ Search

SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2012

Tertiary basin development and tectonic implications, Whipple Detachment System, Colorado River Extensional Corridor, California and Arizona

Colorado River extensional corridor. In the Mohave Mountains and Aubrey Hills of Arizona and the eastern Whipple Mountains of California near Parker Dam, these deposits comprise four unconformity-bounded sequences composed of locally derived epiclastic and volcanic rocks and the Peach Springs Tuff. The three older sequences represent syntectonic units that were deposited coeval with detachment faulting, and the fourth is interpreted to be postextensional. The sequences are correlated between four fault-bounded regions, which are the remnants of four different depositional basins. Similar sequences can be correlated over broad areas of the extensional corridor despite the general lack of widespread units. The basins developed in about the same positions, relative to each other and to volcanic sources, as they occupy at present. This is shown by gradational changes of pre-Tertiary rock types between regions, systematic variations in the abundance of magmatic units, and correlative volcanic units that occur in two adjacent regions. The basins formed in the early Miocene from segmentation of the upper crust into blocks bounded by high-angle faults that trended both parallel and perpendicular to the direction of extension and which were terminated at middle crustal depths by a low-angle detachment fault. Extreme rotation of one large crustal block, which constitutes the central Mohave Mountains, is recorded by a major unconformity in the lower Miocene section of one basin. Because coeval sections that formed in adjoining basins do not record this rotation, the underlying crustal blocks must have been separated by transfer faults that allowed them to rotate independently. These proposed transfer faults are represented at present by major faults with trends that parallel the direction of extension on the Whipple detachment system.

Arizona, California↗
USGS2014

Review of the work of W. J. McGee on ground‐water levels

W J McGee was a scientist of broad‐interests, large vision, and unbounded enthusiasm for science and its application to human welfare. He was one of the earliest champions of the conservation of our natural resources. He rose from humble origin, by rigorous self‐discipline, to outstanding national leadership. He was absorbed by zeal for service to mankind. His life had a heroic quality, as is well portrayed in the sympathetic and interesting memoir by F. H. Knowlton (Geol. Soc Amer. Bull., v. 24, pp. 18–29, 1913).

Eos, Earth and Space Science News↗
USGS2013

Prolonged magmatic activity on Mars inferred from the detection of felsic rocks

Rocks dominated by the silicate minerals quartz and feldspar are abundant in Earth’s upper continental crust. Yet felsic rocks have not been widely identified on Mars, a planet that seems to lack plate tectonics and the associated magmatic processes that can produce evolved siliceous melts on Earth. If Mars once had a feldspar-rich crust that crystallized from an early magma ocean such as that on the Moon, erosion, sedimentation and volcanism have erased any clear surface evidence for widespread felsic materials. Here we report near-infrared spectral evidence from the Compact Reconnaissance Imaging Spectrometer for Mars onboard the Mars Reconnaissance Orbiter for felsic rocks in three geographically disparate locations on Mars. Spectral characteristics resemble those of feldspar-rich lunar anorthosites, but are accompanied by secondary alteration products (clay minerals). Thermodynamic phase equilibrium calculations demonstrate that fractional crystallization of magma compositionally similar to volcanic flows near one of the detection sites can yield residual melts with compositions consistent with our observations. In addition to an origin by significant magma evolution, the presence of felsic materials could also be explained by feldspar enrichment by fluvial weathering processes. Our finding of felsic materials in several locations on Mars suggests that similar observations by the Curiosity rover in Gale crater may be more widely applicable across the planet.

Nature Geoscience↗
USGS2010

Climate change and wildlife health: direct and indirect effects

Climate change will have significant effects on the health of wildlife, domestic animals, and humans, according to scientists. The Intergovernmental Panel on Climate Change projects that unprecedented rates of climate change will result in increasing average global temperatures; rising sea levels; changing global precipitation patterns, including increasing amounts and variability; and increasing midcontinental summer drought (Intergovernmental Panel on Climate Change, 2007). Increasing temperatures, combined with changes in rainfall and humidity, may have significant impacts on wildlife, domestic animal, and human health and diseases. When combined with expanding human populations, these changes could increase demand on limited water resources, lead to more habitat destruction, and provide yet more opportunities for infectious diseases to cross from one species to another. Awareness has been growing in recent years about zoonotic diseases— that is, diseases that are transmissible between animals and humans, such as Lyme disease and West Nile virus. The rise of such diseases results from closer relationships among wildlife, domestic animals, and people, allowing more contact with diseased animals, organisms that carry and transmit a disease from one animal to another (vectors), and people. Disease vectors include insects, such as mosquitoes, and arachnids, such as ticks. Thus, it is impossible to separate the effects of global warming on wildlife from its effects on the health of domestic animals or people. Climate change, habitat destruction and urbanization, the introduction of exotic and invasive species, and pollution—all affect ecosystem and human health. Climate change can also be viewed within the context of other physical and climate cycles, such as the El Niño Southern Oscillation (El Niño), the North Atlantic Oscillation, and cycles in solar radiation that have profound effects on the Earth’s climate. The effects of climate change on wildlife disease are summarized in several areas of scientific study discussed briefly below: geographic range and distribution of wildlife diseases, plant and animal phenology (Walther and others, 2002), and patterns of wildlife disease, community and ecosystem composition, and habitat degradation.

Fact Sheet↗
USGS2017

Climatic history of the northeastern United States during the past 3000 years

Many ecosystem processes that influence Earth system feedbacks, including vegetation growth, water and nutrient cycling, and disturbance regimes, are strongly influenced by multi-decadal to millennial-scale variations in climate that cannot be captured by instrumental climate observations. Paleoclimate information is therefore essential for understanding contemporary ecosystems and their potential trajectories under a variety of future climate conditions. With the exception of fossil pollen records, there are a limited number of northeastern US (NE US) paleoclimate archives that can provide constraints on its temperature and hydroclimate history. Moreover, the records that do exist have not been considered together. Tree-ring data indicate that the 20th century was one of the wettest of the past 500 years in the eastern US (Pederson et al., 2014), and lake-level records suggest it was one of the wettest in the Holocene (Newby et al., 2014); how such results compare with other available data remains unclear, however. Here we conduct a systematic review, assessment, and comparison of paleotemperature and paleohydrological proxies from the NE US for the last 3000 years. Regional temperature reconstructions are consistent with the long-term cooling trend (1000 BCE–1700 CE) evident in hemispheric-scale reconstructions, but hydroclimate reconstructions reveal new information, including an abrupt transition from wet to dry conditions around 550–750 CE. NE US paleo data suggest that conditions during the Medieval Climate Anomaly were warmer and drier than during the Little Ice Age, and drier than today. There is some evidence for an acceleration over the past century of a longer-term wetting trend in the NE US, and coupled with the abrupt shift from a cooling trend to a warming trend from increased greenhouse gases, may have wide-ranging implications for species distributions, ecosystem dynamics, and extreme weather events. More work is needed to gather paleoclimate data in the NE US, make inter-proxy comparisons, and improve estimates of uncertainty in the reconstructions.

Climate of the Past↗
USGS2014

Temperature data acquired from the DOI/GTN-P Deep Borehole Array on the Arctic Slope of Alaska, 1973-2013

A homogeneous set of temperature measurements obtained from the DOI/GTN-P Deep Borehole Array between 1973 and 2013 is presented; DOI/GTN-P is the US Department of the Interior contribution to the Global Terrestrial Network for Permafrost (GTN-P). The 23-element array is located on the Arctic Slope of Alaska, a region of cold continuous permafrost. Most of the monitoring wells are situated on the Arctic coastal plain between the Brooks Range and the Arctic Ocean, while others are in the foothills to the south. The data represent the true temperatures in the wellbores and surrounding rocks at the time of the measurements; they have not been corrected to remove the thermal disturbance caused by drilling the wells. With a few exceptions, the drilling disturbance is estimated to have been on the order of 0.1 K or less by 1989. Thus, most of the temperature measurements acquired during the last 25 yr are little affected by the drilling disturbance. The data contribute to ongoing efforts to monitor changes in the thermal state of permafrost in both hemispheres by the Global Terrestrial Network for Permafrost, one of the primary subnetworks of the Global Terrestrial Observing System (GTOS). The data will also be useful for refining our basic understanding of the physical conditions in permafrost in Arctic Alaska, as well as providing important information for validating predictive models used for climate impact assessments. The processed data are available from the Advanced Cooperative Arctic Data and Information Service (ACADIS) repository at doi:10.5065/D6N014HK.

Alaska↗
USGS2018

Mean composite fire severity metrics computed with Google Earth Engine offer improved accuracy and expanded mapping potential

Landsat-based fire severity datasets are an invaluable resource for monitoring and research purposes. These gridded fire severity datasets are generally produced with pre-and post-fire imagery to estimate the degree of fire-induced ecological change. Here, we introduce methods to produce three Landsat-based fire severity metrics using the Google Earth Engine (GEE) platform: the delta normalized burn ratio (dNBR), the relativized delta normalized burn ratio (RdNBR), and the relativized burn ratio (RBR). Our methods do not rely on time-consuming a priori scene selection and instead use a mean compositing approach in which all valid pixels (e.g. cloud-free) over a pre-specified date range (pre- and post-fire) are stacked and the mean value for each pixel over each stack is used to produce the resulting fire severity datasets. This approach demonstrates that fire severity datasets can be produced with relative ease and speed compared the standard approach in which one pre-fire and post-fire scene are judiciously identified and used to produce fire severity datasets. We also validate the GEE-derived fire severity metrics using field-based fire severity plots for 18 fires in the western US. These validations are compared to Landsat-based fire severity datasets produced using only one pre- and post-fire scene, which has been the standard approach in producing such datasets since their inception. Results indicate that the GEE-derived fire severity datasets show improved validation statistics compared to parallel versions in which only one pre-fire and post-fire scene are used. We provide code and a sample geospatial fire history layer to produce dNBR, RdNBR, and RBR for the 18 fires we evaluated. Although our approach requires that a geospatial fire history layer (i.e. fire perimeters) be produced independently and prior to applying our methods, we suggest our GEE methodology can reasonably be implemented on hundreds to thousands of fires, thereby increasing opportunities for fire severity monitoring and research across the globe.

Remote Sensing↗
USGS2014

Characterizing riverbed sediment using high-frequency acoustics 1: spectral properties of scattering

Bed-sediment classification using high-frequency hydro-acoustic instruments is challenging when sediments are spatially heterogeneous, which is often the case in rivers. The use of acoustic backscatter to classify sediments is an attractive alternative to analysis of topography because it is potentially sensitive to grain-scale roughness. Here, a new method is presented which uses high-frequency acoustic backscatter from multibeam sonar to classify heterogeneous riverbed sediments by type (sand, gravel,rock) continuously in space and at small spatial resolution. In this, the first of a pair of papers that examine the scattering signatures from a heterogeneous riverbed, methods are presented to construct spatially explicit maps of spectral properties from geo-referenced point clouds of geometrically and radiometrically corrected echoes. Backscatter power spectra are computed to produce scale and amplitude metrics that collectively characterize the length scales of stochastic measures of riverbed scattering, termed ‘stochastic geometries’. Backscatter aggregated over small spatial scales have spectra that obey a power-law. This apparently self-affine behavior could instead arise from morphological- and grain-scale roughnesses over multiple overlapping scales, or riverbed scattering being transitional between Rayleigh and geometric regimes. Relationships exist between stochastic geometries of backscatter and areas of rough and smooth sediments. However, no one parameter can uniquely characterize a particular substrate, nor definitively separate the relative contributions of roughness and acoustic impedance (hardness). Combinations of spectral quantities do, however, have the potential to delineate riverbed sediment patchiness, in a data-driven approach comparing backscatter with bed-sediment observations (which is the subject of part two of this manuscript).

Journal of Geophysical Research F: Earth Surface↗
USGS1970

The diffusion of ions in unconsolidated sediments

Diffusion in unconsolidated sediments generally proceeds at rates ranging from half to one twentieth of those applying to diffusion of ions and molecules in free solution. Diffusion rates are predictable with respect to porosity and path tortuosity in host sediments, and can be conveniently measured by determinations of electrical resistivity on bulk sediment samples. Net ion flux is further influenced by reactions of diffusing species with enclosing sediments, but such influences should not be confused with or lumped with diffusion processes.

Earth and Planetary Science Letters↗
USGS1996

Influence of stretching and density contrasts on the chemical evolution of continental magmas: An example from the Ivrea-Verbano Zone

The southern Ivrea-Verbano Zone of the Italian Western Alps contains a huge mafic complex that intruded high-grade metamorphic rocks while they were resident in the lower crust. Geologic mapping and chemical variations of the igneous body were used to study the evolution of underplated crust. Slivers of crustal rocks (septa) interlayered with igneous mafic rocks are concentrated in a narrow zone deep in the complex (Paragneiss-bearing Belt) and show evidence of advanced degrees of partial melting. Variations of rare-earth-element patterns and Sr isotope composition of the igneous rocks across the sequence are consistent with increasing crustal contamination approaching the septa. Therefore, the Paragneiss-bearing Belt is considered representative of an “assimilation region” where in-situ interaction between mantle- and crust-derived magmas resulted in production of hybrid melts. Buoyancy caused upwards migration of the hybrid melts that incorporated the last septa and were stored at higher levels, feeding the Upper Mafic Complex. Synmagmatic stretching of the assimilation region facilitated mixing and homogenization of melts. Chemical variations of granitoids extracted from the septa show that deep septa are more depleted than shallow ones. This suggests that the first incorporated septa were denser than the later ones, as required by the high density of the first-injected mafic magmas. It is inferred that density contrasts between mafic melts and crustal rocks play a crucial role for the processes of contamination of continental magmas. In thick under plated crust, the extraction of early felsic/hybrid melts from the lower crust may be required to increase the density of the lower crust and to allow the later mafic magmas to penetrate higher crustal levels.

Contributions to Mineralogy and Petrology↗
USGS2004

Non-double-couple microearthquakes at Long Valley caldera, California, provide evidence for hydraulic fracturing

Most of 26 small (0.4≲ M ≲3.1) microearthquakes at Long Valley caldera in mid-1997, analyzed using data from a dense temporary network of 69 digital three-component seismometers, have significantly non-double-couple focal mechanisms, inconsistent with simple shear faulting. We determined their mechanisms by inverting P - and S -wave polarities and amplitude ratios using linear-programming methods, and tracing rays through a three-dimensional Earth model derived using tomography. More than 80% of the mechanisms have positive (volume increase) isotropic components and most have compensated linear-vector dipole components with outward-directed major dipoles. The simplest interpretation of these mechanisms is combined shear and extensional faulting with a volume-compensating process, such as rapid flow of water, steam, or CO 2 into opening tensile cracks. Source orientations of earthquakes in the south moat suggest extensional faulting on ESE-striking subvertical planes, an orientation consistent with planes defined by earthquake hypocenters. The focal mechanisms show that clearly defined hypocentral planes in different locations result from different source processes. One such plane in the eastern south moat is consistent with extensional faulting, while one near Casa Diablo Hot Springs reflects en echelon right-lateral shear faulting. Source orientations at Mammoth Mountain vary systematically with location, indicating that the volcano influences the local stress field. Events in a ‘spasmodic burst’ at Mammoth Mountain have practically identical mechanisms that indicate nearly pure compensated tensile failure and high fluid mobility. Five earthquakes had mechanisms involving small volume decreases, but these may not be significant. No mechanisms have volumetric moment fractions larger than that of a force dipole, but the reason for this fact is unknown.

California↗
USGS2016

Functional metagenomic selection of RubisCOs from uncultivated bacteria

Ribulose 1,5-bisphosphate carboxylase/oxygenase (RubisCO) is a critical yet severely inefficient enzyme that catalyses the fixation of virtually all of the carbon found on Earth. Here, we report a functional metagenomic selection that recovers physiologically active RubisCO molecules directly from uncultivated and largely unknown members of natural microbial communities. Selection is based on CO 2 -dependent growth in a host strain capable of expressing environmental deoxyribonucleic acid (DNA), precluding the need for pure cultures or screening of recombinant clones for enzymatic activity. Seventeen functional RubisCO-encoded sequences were selected using DNA extracted from soil and river autotrophic enrichments, a photosynthetic biofilm and a subsurface groundwater aquifer. Notably, three related form II RubisCOs were recovered which share high sequence similarity with metagenomic scaffolds from uncultivated members of the G allionellaceae family. One of the G allionellaceae RubisCOs was purified and shown to possess CO 2 /O 2 specificity typical of form II enzymes. X-ray crystallography determined that this enzyme is a hexamer, only the second form II multimer ever solved and the first RubisCO structure obtained from an uncultivated bacterium. Functional metagenomic selection leverages natural biological diversity and billions of years of evolution inherent in environmental communities, providing a new window into the discovery of CO 2 -fixing enzymes not previously characterized.

Environmental Microbiology↗
USGS2018

Geologic field-trip guide of volcaniclastic sediments from snow- and ice-capped volcanoes—Mount St. Helens, Washington, and Mount Hood, Oregon

This field guide for the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly 2017 focuses on volcaniclastic sediments from Mount St. Helens in Washington and Mount Hood in Oregon. The trip spends four days in the field and includes nine stops at each volcano. For completeness, this guidebook also includes sixteen optional stops in the Mount St. Helens area and three in the Mount Hood area. These two volcanoes provide excellent depositional records of the broad spectrum of volcanic hazards that involve the flow or fall of volcaniclastic particles. At the field-trip stops we will contrast and compare the different types of deposits—sediments that can be frustratingly difficult to distinguish from one another. Correct identification of deposit origin leads to a better understanding of hazards that can impact vulnerable communities at particular volcanoes. During this four-day field trip, we will spend two days in the Mount St. Helens area and two days near Mount Hood. On the first day, we will visit debris-avalanche and lahar deposits in the Toutle River valley in Washington. The second day will focus on pyroclastic density current, pyroclastic-fall, lahar, and volcano-fluvial deposits in the Lewis River drainage system near Mount St. Helens. On the third day, we will visit hyaloclastites, glacial tills, and other diamicts in the Hood River and Sandy River basins near Mount Hood. The fourth and final day will focus on distal lahar and volcano-fluvial deposits downstream of Mount Hood. What follows is an in-depth introduction to the deposits studied on this field trip. We provide criteria that are observable in the field to aid in differentiating between pyroclastic density current, pyroclastic-fall, debris-avalanche, lahar, water-flood, and glacial deposits. We also introduce the Holocene eruptive histories of Mount St. Helens and Mount Hood and discuss the processes responsible for deposit emplacement. Field-trip stops and features of interest along the route are described in detail in a road log that provides daily cumulative mileage.

Oregon, Washington↗
USGS1985

An estimate of hydrothermal fluid residence times and vent chimney growth rates based on 210Pb Pb ratios and mineralogic studies of sulfides dredged from the Juan de Fuca Ridge

The 210 PbPb ratios across two sulfide samples dredged from the Juan de Fuca Ridge are used to estimate the growth rate of the sulfide material and the residence time of the hydrothermal fluid within the oceanic crust from the onset of basalt alteration. 210 Pb is added to the hydrothermal fluid by two processes: (1) high-temperature alteration of basalt and (2) if the residence time of the fluid is on the order of the 22.3-year half-life of 210 Pb, by in-situ growth from 222 Rn ( Krishnaswami and Turekian, 1982 ). Stable lead is derived only from the alteration of basalt. The 210 Pb/Pb ratio across one sample was ∼ 0.5 dpm/10 −6 g Pb, and across the other it was ∼ 0.4 dpm/10 −6 g Pb. These values are quite close to the 238 UP/b ratios of basalts from the area, suggesting that the residence time of the hydrothermal fluid from the onset of basalt alteration is appreciably less than the mean life of 210 Pb, i.e., the time required for ingrowth from the radon. An apparent growth rate of 1.2 cm/yr is derived from the slope of the 210 Pb/Pb curve for one of the samples. This is consistent with its mineralogy and texture which suggest an accretionary pattern of development. There is no obvious sequential growth pattern, and virtually no gradient in 210 Pb/Pb across the second sample. This is consistent with alteration of the original 210 Pb/Pb distribution by extensive remobilization reactions which are inferred from the mineralogic and textural relationships of the sample.

Earth and Planetary Science Letters↗
USGS1994

Age and Sr isotopic composition of volcanic rocks in the Maricunga Belt, Chile: Implications for magma sources

K-Ar and 40 Ar/ 39 Ar dating of volcanic rocks from the Maricunga belt of north-central Chile indicate that igneous activity took place throughout most of Miocene time at various places in the 150 by 30 km belt. No migration patterns of volcanism appear in the Miocene rocks of the belt. Volcanic activity ceased by the end of the Miocene. All the Miocene volcanic rocks studied are calcic andesites to dacites with about 62% SiO 2 , 18% A1 2 O 3 , 4% Fe 2 O 3 (total), and 2% K 2 O. Initial 87 Sr/ 86 Sr (Sr i ) values fall into two groups, one of lower values around 0.7050 to the west and the other of higher values around 0.7060 to the east. It is postulated that the two Sr i groups reflect two adjoining coherent lower-crustal magma sources of possibly different age and subtly different composition that form part of the western edge of the South American craton.

Journal of South American Earth Sciences↗
USGS2019

Seismic velocity structure across the 2013 Craig, Alaska rupture from aftershock tomography: Implications for seismogenic conditions

The 2013 Craig, Alaska M W 7.5 earthquake ruptured along ∼150 km of the Queen Charlotte Fault (QCF), a right-lateral strike-slip plate boundary fault separating the Pacific and North American plates. Regional shear wave analyses suggest that the Craig earthquake rupturepropagated in the northward direction faster than the S-wave (supershear). Theoretical studies suggest that a bimaterial interface, such as that along the QCF, which separates oceanic and continental crust with differing elastic properties, can promote supershear rupture propagation. We deployed short-period ocean-bottom seismometers (OBS) as a part of a rapid-response effort less than four months after the Craig earthquake mainshock. During a 21-day period, 1,133 aftershocks were recorded by 8 OBS instruments. Aftershock spatial distribution indicates that the base of the seismogenic zone along the QCF approaches ∼25 km depth, consistent with a thermally-controlled fault rheology expected for igneous rocks at oceanic transform faults. The spatial distribution also provides supporting evidence for a previously hypothesized active strand of the QCF system within the Pacific Plate. Tomographic traveltime inversion for velocity structure indicates a low-velocity (V P and V S ) zone on the Pacific side of the plate boundary at 5–20 km depths, where NeogenePacific crust and upper mantle seismic velocities average ∼3–11% slower than the North American side, where the Paleozoic North American crust is seismically faster. Our results suggest that elastic properties along the studied portion of the QCF are different than those of a simple oceanic–continental plate boundary fault. In our study region, velocity structure across the QCF, while bimaterial, does not support faster material on the west side of the fault, which has been proposed as one possible explanation for northward supershear propagation during the Craig earthquake. Instead, we image low-velocity material on the west side of the fault. Explanations could include that part of the rupture was subshear, or that fault damage zone properties or fault smoothness are more important controls on supershear rupture than a bimaterial contrast.

Alaska↗
USGS2012

Basin and range crustal and upper mantle structure, northwest to central Nevada

We present an interpretation of the crustal and uppermost mantle structure of the Basin and Range of northwestern Nevada based on seismic refraction/wide‐angle reflection, near‐vertical reflection, and gravity data. In comparison to most previous estimates, we find that the crust is somewhat thicker (32–36 km versus 22–30 km), and the uppermost mantle velocity is somewhat higher (8.0 km/s versus 7.3–7.9 km/s). Along our transects, the crust is thinnest (32 km) in the Carson Sink‐Buena Vista Valley region and increases by 2–4 km to the west and east, respectively. There is considerable complexity throughout the crust where velocities range from of 2.5 km/s at the surface to 7.4 km/s in the lowermost crust. Variations in velocity and structure of the upper crustal layers reveal apparent basement velocity depressions (areas of lower velocities extending up to 10 km in depth) that underlie some surface ranges as well as the basins. The middle crust rises from about 20 km beneath central Nevada to within 12 km of the surface beneath the area of thinnest crust and is characterized by a modest (∼0.1 km/s) change in velocity and low‐velocity gradients. These midcrustal layers mark the onset of high crustal reflectivity and the apparent limiting depth to which Basin and Range faults can be traced in near‐vertical reflection profiles, suggesting that these midcrustal layers represent the transition between the brittle and ductile zones of the crust. The lower crust is more structurally complex, with layers thickening and thinning in a systematic manner with the upper crustal layers; generally, where there are velocity depressions in the upper crust, the lower crust is thickest and shallowest. The geometry of these lower crustal layers (derived from refraction modeling) coincides with changes in the crustal reflectivity, determined from the Consortium of Continental Reflection Profiling reflection data. The lower crustal layer is unusually high in velocity (7.4 km/s) and is likely the layer identified as mantle in some previous studies. We do not identify the 7.4 km/s layer as mantle because (1) there is an underlying layer with a velocity (8.0 km/s) that is more consistent with the worldwide average velocity for the upper mantle, and (2) the 7.4 km/s layer does not correspond to the “reflection” Moho. Gravity modeling and comparison to existing seismic models show a general consensus in many aspects with respect to crustal structure. This new model forms the basis for speculation on some of the processes associated with rifting of the Basin and Range Province. One such process, lithospheric magmatism, is inferred from the strong attenuation of transmitted seismic waves, which occurs at the same interface at which high‐amplitude, bright spot reflections originate. Unlike previous models, the overall structure and velocity of the crust and uppermost mantle of our new model are similar to other regions worldwide which have undergone high degrees of extension.

Nevada↗
USGS2012

Estimation of rod scale errors in geodetic leveling

Comparisons among repeated geodetic levelings have often been used for detecting and estimating residual rod scale errors in leveled heights. Individual rod-pair scale errors are estimated by a two-step procedure using a model based on either differences in heights, differences in section height differences, or differences in section tilts. It is shown that the estimated rod-pair scale errors derived from each model are identical only when the data are correctly weighted, and the mathematical correlations are accounted for in the model based on heights. Analyses based on simple regressions of changes in height versus height can easily lead to incorrect conclusions. We also show that the statistically estimated scale errors are not a simple function of height, height difference, or tilt. The models are valid only when terrain slope is constant over adjacent pairs of setups (i.e., smoothly varying terrain). In order to discriminate between rod scale errors and vertical displacements due to crustal motion, the individual rod-pairs should be used in more than one leveling, preferably in areas of contrasting tectonic activity. From an analysis of 37 separately calibrated rod-pairs used in 55 levelings in southern California, we found eight statistically significant coefficients that could be reasonably attributed to rod scale errors, only one of which was larger than the expected random error in the applied calibration-based scale correction. However, significant differences with other independent checks indicate that caution should be exercised before accepting these results as evidence of scale error. Further refinements of the technique are clearly needed if the results are to be routinely applied in practice.

Journal of Geophysical Research B: Solid Earth↗