USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗
USGS2009

Internal tidal currents in the Gaoping (Kaoping) Submarine Canyon

Data from five separate field experiments during 2000-2006 were used to study the internal tidal flow patterns in the Gaoping (formerly spelled Kaoping) Submarine Canyon. The internal tides are large with maximum interface displacements of about 200??m and maximum velocities of over 100cm/s. They are characterized by a first-mode velocity and density structure with zero crossing at about 100??m depth. In the lower layer, the currents increase with increasing depth. The density interface and the along-channel velocity are approximately 90?? out-of-phase, suggesting a predominant standing wave pattern. However, partial reflection is indicated as there is a consistent phase advance between sea level and density interface along the canyon axis. ?? 2008 Elsevier B.V. All rights reserved.

Journal of Marine Systems↗
USGS1992

An aeromagnetic survey over the northwestern Ross Ice Shelf and the McMurdo Sound area

As part of the expedition GANOVEX VI 1990/91, the Bundesanstalt für Geowissenschaften und Rohstoffe (BGR), the Alfred Wegener Institute for Polar and Marine Research (AWI), and the United States Geological Survey (USGS) carried out an airborne magnetic survey over the northwestern Ross Ice Shelf and McMurdo Sound between Ross Island, the Transantarctic Mountains, and Minna Bluff. The area planned for the aeromagnetic survey connects directly with the GANOVEX IV survey area (BGR & USGS 1987, BACHEM et al. 1989a) which terminated along an approximately cast-west line at about the latitude of Cape Bird. The GANOVEX IV survey covered the Victoria Land Basin - which is the westernmost of the three north/south striking basins in the Ross Sea - from its northern end in the Terra Nova Bay region to its known southern end at Ross Island. A possible southem extension of the Victoria Land Basin and its central graben structure (the Terror Rift as found from seismic surveys (COOPER et al. 1987) and what has been referred to as Victoria Graben in the aeromagnetic interpretation of the GANOVEX IV data (BOSUM et al. 1989) was one of the major targets for this survey. The survey was laid out in the form of blocks. A 135 km wide transect from the Transantarctic Mountains to about 175° W formed the focal block of the survey (Fig. 1) in which all major scientific objectives could be covered. Other survey blocks were planned to the south of this. During the course of the survey it turned out that in the time available no further area could be covered. Indeed, the unfavourable weather conditions made it impossible to complete even the above described main section fully. In detail, the lay-out of the survey area was closely following that of the GANOVEX IV survey to assure compatibility and direct continuation between the two data sets. The line spacing was chosen again to 4.4 km with a tic-line separation of 22 km. The survey altitude of 2,000 ft (610 m) corresponds to that of the Ross Sea section of the GANOVEX IV survey to which this survey area is directly adjacent. The profile lines were aligned approximately E-W, the tie-lines N-S. As part of the survey area is covered by the maps of the USGS Antarctica Reconnaissance Series 1:250,000 the Lambert conformal conic projection used for these maps was also used for the preparation of a flight line grid.

Polarforschung↗
USGS2010

EAARL Coastal Topography-Fire Island National Seashore, New York, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2013

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗
USGS2010

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2014

Resource manager information needs regarding hydrologic regime shifts for the North Pacific Landscape Conservation

Landscape Conservation Cooperatives (LCCs) are a network of 22 public-private partnerships, defined by ecoregion, that share and provide science to ensure the sustainability of land, water, wildlife, and cultural resources in North America. LCCs were established by the U.S. Department of the Interior (DOI) in recognition of the fact that response to climate change must be coordinated on a landscape-level basis because important resources, ecosystem processes, and resource management challenges extend beyond most of the boundaries considered in current natural resource management. The North Pacific LCC (NPLCC) covers the range of the Pacific coastal temperate rainforest, including an area of 528,360 km 2 spanning 22 degrees of latitude from the Kenai Peninsula, Alaska, to Bodega Bay, California. The coverage area includes parts of four States, two Canadian provinces, and more than 100 Tribes and First Nation language groups. It extends from alpine areas at the crest of coastal mountains across subalpine, montane, and lowland forests to the nearshore marine environment. This wide range of latitudes and elevation zones; terrestrial, freshwater, and marine habitats; and complex jurisdictional boundaries hosts a diversity of natural resources and their corresponding management issues are equally diverse. As evidenced by the Science and Traditional Ecological Knowledge (S-TEK) Strategy guiding principles, identifying and responding to the needs of resource managers is key to the success of the NPLCC. To help achieve this goal of the NPLCC, the U.S. Geological Survey (USGS) has organized several workshops with resource managers and resource scientists to identify management information needs relevant to the priority topics identified in the S-TEK Strategy. Here, we detail the results from a first workshop to address the effects of changes in hydrologic regime on rivers, streams, and riparian corridors. The workshop focused on a subset of the full NPLCC geography and was structured to answer the following questions: What are the valued resources and services that may be affected by hydrologic regime changes in the region? What are the management goals for those resources? How is climate change anticipated to affect valued resources and goals? What adaptation strategies may managers use in response to anticipated changes in resources due to climate-related hydrologic change? What information is needed to inform and use management responses?

Open-File Report↗
USGS2010

EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2017

Stratigraphic cross sections of the Niobrara interval of the Cody Shale and associated rocks in the Wind River Basin, central Wyoming

The Wind River Basin in Wyoming is one of many structural and sedimentary basins that formed in the Rocky Mountain foreland during the Laramide orogeny. The basin is nearly 200 miles long, 70 miles wide, and encompasses about 7,400 square miles in central Wyoming. The basin is bounded by the Washakie Range, Owl Creek uplift, and southern Bighorn Mountains on the north, the Casper arch on the east, the Granite Mountains on the south, and Wind River Range on the west. Many important conventional oil and gas fields producing from reservoirs ranging in age from Mississippian through Tertiary have been discovered in this basin. In addition, an extensive unconventional overpressured basin-centered gas accumulation has been identified in Cretaceous and Tertiary strata in the deeper parts of the basin. It has long been suggested that various Upper Cretaceous marine shales, including the Cody Shale, are the principal hydrocarbon source rocks for many of these accumulations. With recent advances and success in horizontal drilling and multistage fracture stimulation, there has been an increase in exploration and completion of wells in these marine shales in other Rocky Mountain Laramide basins that were traditionally thought of only as hydrocarbon source rocks. The two stratigraphic cross sections presented in this report were constructed as part of a project carried out by the U.S. Geological Survey to characterize and evaluate the undiscovered continuous (unconventional) oil and gas resources of the Niobrara interval of the Upper Cretaceous Cody Shale in the Wind River Basin in central Wyoming. The primary purpose of the cross sections is to show the stratigraphic relationship of the Niobrara equivalent strata and associated rocks in the lower part of the Cody Shale in the Wind River Basin. These two cross sections were constructed using borehole geophysical logs from 37 wells drilled for oil and gas exploration and production, and one surface section along East Sheep Creek near Shotgun Butte in the northwestern part of the basin. Both lines originate at the East Sheep Creek surface section and end near Clarkson Hill in the extreme southeastern part of the basin. The stratigraphic interval extends from the upper part of the Frontier Formation to the middle part of the Cody Shale. The datum is the base of the “chalk kick” marker bed, a distinctive resistivity peak or zone in the lower part of the Cody Shale. A gamma ray and (or) spontaneous potential (SP) log was used in combination with a resistivity log to identify and correlate units. Marine molluscan index fossils collected from nearby outcrop sections were projected into the subsurface to help determine the relative ages of the strata and aid in correlation.

Wyoming↗
USGS2007

The Russell gold deposit, Carolina Slate Belt, North Carolina

Gold deposits have been mined in the Carolina slate belt from the early 1800s to recent times, with most of the production from large mines in South Carolina. The Russell mine, one of the larger producers in North Carolina, is located in the central Uwharrie Mountains, and produced over 470 kg of gold. Ore grades averaged about 3.4 grams per tonne (g/ t), with higher-grade zones reported. The Russell deposit is interpreted to be a sediment-hosted, gold-rich, base-metal poor, volcanogenic massive sulfide deposit in which gold was remobilized, in part, during Ordovician metamorphism. The ore was deposited syngenetically with laminated siltstones of the late Proterozoic Tillery Formation that have been metamorphosed to a lower greenschist facies. The Tillery Formation regionally overlies subaerial to shallow marine rhyolitic volcanic and volcaniclastic rocks of the Uwharrie Formation and underlies the marine volcanic and sedimentary rocks of the Cid Formation. Recent mapping has shown that a rhyolitic dome near the Russell mine was extruded during the deposition of the lower part of the Tillery Formation, at about the same time as ore deposition. Relict mafic, rock fragments present in the ore zones suggest contemporaneous bimodal (rhyolite-basalt) volcanism. The maximum formation age of the Russell deposit is younger than 558 Ma, which is similar to that of the larger, well known Brewer, Haile, and Ridgeway deposits of South Carolina. Gold was mined from at least six zones that are parallel to the regional metamorphic foliation. These strongly deformed zones consist of northeast-trending folds, high-angle reverse faults, and asymmetric doubly plunging folds overturned to the southeast. The dominant structure at the mine is an asymmetric doubly plunging anticline with the axis trending N 45?? E, probably related to late Ordovician (456 ?? 2 Ma) regional metamorphism and deformation. Two stages of pyrite growth are recognized. Stage 1, primary, spongy pyrite, is present in thin massive sulfide layers parallel to bedding and intergrown with pyrrhotite, chalcopyrite, sphalerite, and sparse arsenopyrite. Stage 2, secondary pyrite, is present as euhedral, idiomorphic rims on spongy pyrite and as veinlets that parallel the regional foliation. Stage 1 pyrite was deposited syngenetically or diagenetically during or soon after sedimentation. Stage 2 pyrite overgrowths and veins resulted from recrystallization or remobilization of stage 1 pyrite, probably during deformation related to Ordovician regional metamorphism. It is proposed that the spongy texture of the stage 1 pyrite represents nucleation and growth of pyrite on organic matter, possibly of bacterial origin. Other textures, such as geometric voids in spongy pyrite, As-rich zones surrounding central voids, 60-??m ring structures composed of spongy pyrite, and layers of spongy pyrite interlayered with bedding laminations, also appear to indicate replacement of organic matter by pyrite. Stage 1 pyrite contains up to 0.06 wt percent gold. The ??34S values of pyrite in and near pyritic ore (3.5-4.5???), in the rhyolite dome (5.1-5.4???) and in the Tillery Formation (5.9-6.2???) are interpreted to reflect mixing of sulfur derived from igneous and seawater sources. Whole-rock ??18O values of nearby unaltered mudstone are about 11 per mil whereas those from altered mudstone at the deposit are 7.4 to 10.6 per mil. The lower ?? 18O values are interpreted to indicate possible high-temperature exchange between relatively low ??18O hydrothermal fluids and the wall rocks. Gold, As, K, and Mo are enriched relative to the regional background in both the ore zones and in pyrite veins and disseminations in the nearby rhyolite dome, suggesting a possible genetic link between the rhyolitic volcanism and the gold mineralization. ?? 2007 Society of Economic Geologists, Inc.

Economic Geology↗
USGS2008

Geologic Map of the Eastern Three-Quarters of the Cuyama 30' x 60' Quadrangle, California

The map area encompasses a large part of the western Transverse Ranges and southern Coast Ranges of southern California. The San Andreas fault (SAF) cuts the northern part of the map. The area south of the SAF, about 80 percent of the map area, encompasses several distinct tectonic blocks bounded by major thrust or reverse faults, including the Santa Ynez fault, Big Pine fault (and structurally continuous Pine Mountain fault), Tule Creek fault, Nacimiento fault, Ozena fault, Munson Creek fault, Morales fault, and Frazier Mountain Thrust System. Movement on these faults is as old as Miocene and some faults may still be active. In addition, the Paleocene Sawmill Mountain Thrust south of the SAF and the Pastoria Thrust north of the SAF place Cretaceous and older crystalline rocks above Pelona Schist (south of the SAF) and Rand Schist (north of the SAF). South of the SAF, each tectonic block contains a unique stratigraphy, reflecting either large-scale movement on bounding faults or different depositional environments within each block. On Mount Pinos and Frazier Mountain, intrusive and metamorphic rocks as old as Mesoproterozoic, but including voluminous Cretaceous granitoid rocks, underlie or are thrust above non-marine sedimentary rocks as old as Miocene. Elsewhere, marine and non-marine sedimentary rocks are as old as Cretaceous, dominated by thick sequences of both Eocene and Cretaceous marine shales and sandstones. Middle Miocene to early Oligocene volcanic rocks crop out in the Caliente Hills (part of Caliente Formation) and south of Mount Pinos (part of the Plush Ranch Formation). Fault-bounded windows of Jurassic Franciscan Complex ophiolitic rocks are evident in the southwest corner of the area. North of the SAF, marine and non-marine sedimentary rocks as old as Eocene and Miocene volcanic rocks overlie a crystalline basement complex. Basement rocks include Cretaceous intrusive rocks that range from monzogranite to diorite, and Jurassic to late Paleozoic intrusive and metamorphic rocks. The Jurassic to late Paleozoic intrusive rocks include diorite, gabbro, and ultramafic rocks, and the metasedimentary rocks include marble, quartzite, schist, and gneiss.

Scientific Investigations Map↗
USGS2001

Surface-geophysical characterization of ground-water systems of the Caloosahatchee River basin, southern Florida

The Caloosahatchee River Basin, located in southwestern Florida, includes about 1,200 square miles of land. The Caloosahatchee River receives water from Lake Okeechobee, runoff from the watershed, and seepage from the underlying ground-water systems; the river loses water through drainage to the Gulf of Mexico and withdrawals for public-water supply and agricultural and natural needs. Water-use demands in the Caloosahatchee River Basin have increased dramatically, and the Caloosahatchee could be further stressed if river water is used to accommodate restoration of the Everglades. Water managers and planners need to know how much water will be used within the river basin and how much water is contributed by Lake Okeechobee, runoff, and ground water. In this study, marine seismic-reflection and ground-penetrating radar techniques were used as a means to evaluate the potential for flow between the river and ground-water systems. Seven test coreholes were drilled to calibrate lithostratigraphic units, their stratal geometries, and estimated hydraulic conductivities to surface-geophysical profiles. A continuous marine seismic-reflection survey was conducted over the entire length of the Caloosahatchee River and extending into San Carlos Bay. Lithostratigraphic units that intersect the river bottom and their characteristic stratal geometries were identified. Results show that subhorizontal reflections assigned to the Tamiami Formation intersect the river bottom between Moore Haven and about 9 miles westward. Oblique and sigmoidal progradational reflections assigned to the upper Peace River Formation probably crop out at the floor of the river in the Ortona area between the western side of Lake Hicpochee and La Belle. These reflections image a regional-scale progradational deltaic depositional system containing quartz sands with low to moderate estimated hydraulic conductivities. In an approximate 6-mile length of the river between La Belle and Franklin Lock, deeper karstic collapse structures are postulated. These structures influence the geometries of parallel reflections that intersect the river channel. Here, reflections assigned to the Buckingham Limestone Member of the Tamiami Formation (a confining unit) and reflections assigned to the clastic zone of the sandstone aquifer likely crop out at the river bottom. Beneath these shallow reflections, relatively higher amplitude parallel reflections of the carbonate zone of the sandstone aquifer are well displayed in the seismic-reflection profiles. In San Carlos Bay, oblique progradational reflections assigned to the upper Peace River Formation are shown beneath the bay. Almost everywhere beneath the river, a diffuse ground-water flow system is in contact with the channel bottom. Ground-penetrating radar profiles of an area about 2 miles north of the depositional axis of the deltaic depositional system in the Ortona area show that progradational clinoforms imaged on seismic reflection profiles in the Caloosahatchee River are present within about 17 feet of the ground surface. Ground-penetrating radar profiles show southward dipping, oblique progradational reflections assigned to the upper Peace River Formation that are terminated at their tops by a toplapping or erosional discontinuity. These clinoformal reflections image clean quartz sand that is probably characterized by moderate hydraulic conductivity. This sand could be mapped using ground-penetrating radar methods.

Water-Resources Investigations Report↗
USGS1981

Geology and concepts of genesis of important types of uranium deposits

Uranium ore deposits occur in nearly every major rock type in the earth’s crust, and nearly all igneous, metamorphic, and sedimentary processes are capable of concentrating or dispersing uranium. However, only three types of deposits account for more than 70 percent of known Western World Reasonably Assured Resources (WWRAR): Precambrian quartz-pebble conglomerate type, Proterozoic unconformity type, and Phanerozoic sandstone type. Igneous-related processes in plutonic, volcanic, and magmatic-hydrothermal environments, considered important 25 years ago, now account for less than 10 percent of world resources known at present. The oldest known ore deposits were formed in conglomerates by placer processes under unique anoxic conditions. For the last 2.2 b.y., since oxygenation of the atmosphere, the genesis of both high- and low-temperature deposits has been dominated by three general geochemical processes: (1) oxidation of uranium to soluble U(VI) species permitting aqueous transport, perhaps most commonly as uranyl-carbonate complexes; (2) reduction, principally by C, S −2 , or Fe +2 species, to U(IV) to allow precipitation of uraninite (pitchblende), and coffinite, although the specific reductant commonly cannot be determined because these three tend to be associated geologically; and (3) igneous and metamorphic differentiation caused by exclusion of uranium from crystal structure of most rock-forming minerals. The geochemistry of uranium ore-forming processes has changed in time because of the evolution of life forms and their impact on the earth’s oxygen and carbon budgets. This evolution is reflected in changing predominance of ore types in geologic time: (1) pre-2.8 b.y. ago—no known uranium ore deposits; (2) ca. 2.8 to 2.2 b.y. ago—the first intràcratonic basins and anoxic atmosphere permitted accumulation of placer deposits of uraninite in quartz-pebble conglomerates; these deposits contain about 19 percent of the western world’s resources; (3) ca. 2.2 to 0.4 b.y. ago—following oxygenation of the atmosphere uranium was oxidized and transported as soluble U(VI) complexes to sites of reduction, commonly in organic carbon-rich marginal marine environments. Diagenesis, metamorphism, and near-surface redox enrichment subsequently formed unconformity-type, ultrametamorphic-type, and vein-type ore deposits which together contain more than 25 percent of the western world’s resources; (4) ca. 0.4 b.y. ago to present—after development of land plants the most important ore-forming process was redox-controlled deposition from ground water in continental sediments. Sandstone-type deposits, characteristic of this stage, contain about 40 percent of the western world’s resources.

Book chapter↗
USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS1984

Sandstone units of the Lee Formation and related strata in eastern Kentucky

Most of the Cumberland Plateau region of southeastern Kentucky is underlain by thick sequences of quartzose sandstone which are assigned for the most part to the Lee Formation. Much new information has been gathered about the Lee and related strata as a result of the cooperative mapping program of the U. S. Geological Survey and the Kentucky Geological Survey between 1960 and 1978. This report summarizes the age, lithology, distribution, sedimentary structures, and stratigraphic relations of the sandstone units of the Lee within and between each of three major outcrop belts in Kentucky: Cumberland Mountain, Pine Mountain, and the Pottsville Escarpment area. The Lee Formation generally has been regarded as Early Pennsylvanian in age and separated from Mississippian strata in Kentucky by an unconformity. However, lithostratigraphic units included in the formation as presently defined are broadly time-transgressive and range in age from Late Mississippian in parts of the Cumberland Mountain outcrop belt to Middle Pennsylvanian in the Pottsville Escarpment area. Members of the Lee intertongue with and grade into the underlying Pennington Formation and overlying Breathitt Formation. Sandstone and conglomeratic sandstone members of the Lee of Mississippian age found only in parts of the Cumberland overthrust sheet are closely associated with marine rocks; Pennsylvanian members are mostly associated with continental coal-bearing strata. Sandstone members of the Lee are mostly quartz rich and range from more than 90 percent to more than 99 percent quartz. They are relatively coarse grained, commonly pebbly, and in places conglomeratic. The units are southwest-trending linear or broadly lobate bodies. The Lee Formation is as much as 1,500 ft thick in the type area in Cumberland Mountain where it has been divided into eight members. The Pinnacle Overlook, Chadwell, White Rocks Sandstone, Middlesboro, Bee Rock Sandstone, and Naese Sandstone Members are mostly quartzose sandstone and conglomerate. The Dark Ridge and Hensley Members are mostly shale, siltstone, thin-bedded silty sandstone, and coal. The lower three of these members, the Pinnacle Overlook, Chadwell, and White Rocks Sandstone, are assigned to the Upper Mississippian Series because they intertongue with marine reddish or greenish shale and siltstone of the Pennington Formation or equivalent strata that contain a Late Mississippian fauna. The overlying quartzose sandstone members of the Lee commonly have coalified plant remains and impressions of plants and are Early to Middle Pennsylvanian in age; they are generally associated with terrestrial shale and siltstone containing coal beds and pinch out eastward into subgraywacke, siltstone, and shale. Although marine members commonly are bimodal, resultant transport directions for both marine and terrestrial members are southwesterly as determined by crossbedding. Thickness variations of the Middlesboro Member in the Cumberland overthrust sheet suggest that it represents tills of at least three major southwesterly trending paleovalleys. Thickness variations of the Bee Rock Sandstone Member east of Rocky Face fault and the combined Bee Rock and Naese Sandstone Members west of Rocky Face fault suggest that these members represent tills of at least two major southwesterly trending paleovalleys. East of Rocky Face fault, the Bee Rock is generally the uppermost member of the Lee; west of the fault, the overlying Naese is at the top. The Naese may range in age from Early to Middle Pennsylvanian and is partly or wholly equivalent to the Rockcastle Sandstone member of the Lee Formation in the area of the Pottsville Escarpment. The Mississippian-Pennsylvanian systemic boundary in the area of the Cumberland overthrust sheet in most places has been placed at an unconformity at the base of the Middlesboro Member; locally it is projected at the base of shales of the underlying Dark Ridge Member or equivalent strata in the Penningto

Professional Paper↗
USGS1988

Effects of kelp forest removal on associated fish assemblages in central California

Visual surveys along subtidal belt transects were used to compare fish assemblages on an experimental and a control site before and after the removal of a canopy-forming kelp forest. The giant kelp Macrocystis pyrifera (L.) C.A. Agardh was removed at the holdfast from ≈ 1 ha of high relief structurally complex rock substratum. The abundance of seven species of fish, of which five were considered midwater species, significantly declined after the kelp was removed. No increases in abundance were noted within the experimental site. On the control site, two declines in abundance were observed, while two species increased in abundance. These results indicate that the presence of a giant kelp forest may increase the abundance and species diversity of the fish assemblages over a high relief rocky reef in central California, U.S.A.

Journal of Experimental Marine Biology and Ecology↗
USGS1969

History of the Redwall Limestone of northern Arizona

Throughout most of northern Arizona the Redwall Limestone of Mississippian age is readily divisible into four lithologic units, designated in ascending order as the Whitmore Wash, Thunder Springs, Mooney Falls, and Horseshoe Mesa Members. The first and third members are thick-bedded to massive carbonate rock. The Horseshoe Mesa Member is relatively thin-bedded limestone, and the Thunder Springs Member is distinctive because it consists of chert beds alternating with thin beds of carbonate rock. Trends in thickness of the various members indicate that the sediment that formed the Redwall was deposited on an even, gently sloping shelf that extended westward from the Defiance positive element, a low landmass located near the present eastern border of northern Arizona. The Peach Springs and Payson ridges projected west and southwest, respectively, from the positive element. These ridges, which were partly submerged and partly above sea level during Mississippian time, are indicated by the patterns of isopach lines and, in part, by the distribution of faunas. The ridges divided the Arizona section of the shelf into three segments: the northern-most, which slopes northwest toward the Cordilleran geosyncline, and the other two, which slope toward the south and southwest. Two transgressions and two regressions of the western and southern seaways are believed to be represented by the Redwall. The first transgression, which is recorded by thick beds of clastic sediment of the Whitmore Wash Member, was less extensive than the second, which is recorded by massive beds of the Mooney Falls Member, for on the western margins of the Defiance positive element the Mooney Falls Member overlaps the two lower members. Furthermore, south of Grand Canyon the Whitmore Wash and Thunder Springs Members lap against the Payson ridge without covering it, whereas the Mooney Falls Member, although relatively thin, extends across it. Regression is believed to be represented by thin beds of the Thunder Springs and Horseshoe Mesa Members, which are interpreted to be the result of low base level caused by silting up with clastic material and consequent retreat of the sea. Cycles in sedimentation are well developed in some parts of the Redwall, especially in the upper two members in which differences in grain size represent five major cycles recognized throughout the extent of the Grand Canyon. These textural differences, ranging from aphanitic to coarse grained, are considered to be not measures of the amount of transportation, as with terrigenous sediments, but reflections of the degree of turbulence or the lack of turbulence during deposition. They are interpreted as indicators of cyclic fluctuations in environment, probably related to changes in wave base. Several clearly defined facies within the Redwall indicate environments of deposition. The clastic limestone that forms a major part of the formation, especially in the offshore areas to the west and south, is believed to represent normal marine conditions where circulation was good and turbulence moderate to strong. Uniform finely crystalline dolomite probably developed through early diagenetic processes on the sea floor. On the basis of its distribution pattern the dolomite seems to have formed under shoal conditions, especially where it borders the shore of the Defiance positive element and along Peach Springs ridge. Oölitic limestone at the top of both major transgressive units is interpreted as reflecting the oscillatory conditions of sea level that provided wave and current agitation at times of maximum sea advance in shoal areas bordering the ridges. Aphanitic limestone, representing accumulations of lime mud, seems to be developed best in the uppermost, or Horseshoe Mesa, member, where, as the seas regressed, nearshore waters may have been isolated and certainly were very calm. Original textures and some structures are preserved in most limestones of the Redwall, and they give much evidence concerning oceanographic factors of the time. Generalizations have been developed concerning the character of the bottom, degrees of energy represented, depth, salinity, and other factors for various parts of the formation. Although these factors differed greatly with time and space, the general conclusions reached are that (1) depths were very shallow to moderate, (2) the sea floor was composed nearly entirely of lime mud and lime sand, which contained no terrigeneous material but with great crinoidal accumulations locally, (3) turbulence ranged from considerable to none, and (4) the sea was clear and warm and nowhere contained saline concentrations sufficient to form evaporites. Chert forming thin irregular beds, locally lenticular and nodular, occurs at two prinicpal positions in the stratigraphic section, and in each it alternates with thin beds of carbonate rock. Chert is prominent throughout the Thunder Springs Member and forms thin but definite zones near the top of the Mooney Falls Member. This chert is believed to have formed on the sea floor during early diagenesis, as evidenced by petrography, paleogeography, and faunal relations. Regional differences in the abundance and type of associated fossils, recorded on a series of 4-foot-square sample plots made throughout the Grand Canyon, suggest a probable relation between fossil distribution and genesis of the chert. The fauna of the Redwall is abundant and varied, but preservation in many places is poor, and numerous specimens can be collected only locally. The most common fossils are brachiopods, corals, foraminifers, and crinoids, but blastoids, gastropods, cephalopods, and pelecypods are not rare. Bryozoans are abundant in the chert of the Thunder Springs Member but uncommon elsewhere. Other organisms locally distributed but not common are algae, trilobites, fish, holothurians, and ostracodes. These groups have been studied by specialists and are the subject of Chapters V through XIII. Certain of the faunal groups, notably the corals and foraminifers, show some degree of vertical zoning and so have furnished important data on age and correlation. Among the corals, the zones of Dorlodotia inconstans and Michelinia expansa are especially significant because of their persistence from section to section across broad areas. The foraminiferal zones are broader and less sharply defined, but they represent a series of major changes in species from bottom to top of the formation. Age determination made on the basis of foraminifers and brachiopods indicate that the base of the Redwall is progressively younger as it passes from areas that were offshore eastward or northward toward the Defiance positive element; the top of the Redwall, in contrast, is shown to be progressively younger away from the positive element. Thus basal beds of Kinderhook age are recognized at Grand Wash, Quartermaster, and Meriwitica Canyons to the northwest, but the lowest strata are of Osage age at Bridge Canyon, Grandview, and other sections closer to the landmass. Likewise, units with fossils of middle Meramec age occur in western Grand Canyon, but, except in the one place discussed in the following paragraph, topmost beds farther east in Grand Canyon are of Osage age. South of Grand Canyon the youngest member of the Redwall (Horseshoe Mesa) has been removed by pre-Supai Formation erosion. Rocks still younger than the Horseshoe Mesa once may have covered the entire region, possibly representing a third sequence of transgression and regression. At Bright Angel trail in eastern Grand Canyon, for example, a unique unit at the top of the Redwall section contains fossils of Chester age and apparently represents a remnant of Late Mississippian rocks that survived as an inlier there.

Arizona↗
USGS1972

Reconnaissance engineering geology of the Haines area, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

The Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in urban areas. Study of the Haines area constitutes an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. The evaluations of geologic hazards that follow, although based only upon reconnaissance studies and, therefore, subject to revision, will provide broad guidelines useful in city and land-use planning. It is hoped that the knowledge gained will result in new facilities being built in the best possible geologic environments and being designed so as to minimize future loss of life and property damage. Haines, which is in the northern part of southeastern Alaska approximately 75 miles northwest of Juneau, had a population, of about 700 people in 1970. It is built at the northern end of the Chilkat Peninsula and lies within the Coast Mountains of the Pacific Mountain system. The climate is predominantly marine and is characterized by mild winters and cool summers. The mapped area described in this report comprises about 17 square miles of land; deep fiords constitute most of the remaining mapped area that is evaluated in this study. The Haines area was covered by glacier ice at least once and probably several times during the Pleistocene Epoch. The presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land has been uplifted relative to sea level since the last major deglaciation of the region about 10,000 years ago. The rate of relative uplift of the land at Haines during the past 39 years is 2.26 cm per year. Most or all of this uplift appears to be due to rebound as a result of deglaciation. Both bedrock and surficial deposits are present in the area. Metamorphic and igneous rocks constitute the exposed bedrock. The metamorphic rocks consist of metabasalt of Mesozoic age and pyroxenite of probable early middle Cretaceous age. The igneous rocks consist of diorite and quartz diorite (tonalite) of Cretaceous age. Sedimentary rocks of Tertiary age may be present in the mapped area but are not exposed. The surficial deposits of Quaternary age,-have been divided into the following map units on the basis of time Of deposition, mode of origin, and grain size: (1) undifferentiated drift deposits, (2) outwash and Ice-contact deposits; (3) elevated fine-grained marine deposits, (4) elevated shore and delta deposits, (5) alluvial fan deposits, (6) colluvial deposits, (7) modern beach deposits, (8) Chilkat River flood-plain and delta deposits, and (9) manmade fill. Offshore deposits are described but are not mapped. Southeastern Alaska lies within the tectonically active belt that rims the northern Pacific Basin and has been active since at least early Paleozoic time. The outcrop pattern is the result of late Mesozoic and Tertiary deformational, metamorphic, and intrusive events. Large-scale faulting has been common. The two most prominent inferred fault systems in southeastern Alaska and surrounding regions are: (1) The Denali fault system and (2) the Fairweather-Queen Charlotte Islands fault system. In the general area of Haines, rocks of Mesozoic age northeast of Chilkat River have a simple monoclinal structure. Paleozoic-Mesozoic rocks southwest of Chilkat River are gently to rather complexly folded. Several major and numerous minor faults probably transect the general area of Haines but their exact location and character can only be inferred because their traces are coincident to the long axes of fiords and river valleys, where they are concealed by water or by valley-floor deposits. Inferred faults in or near the Haines mapped area are: (1) Chilkat River fault, (2) Chilkoot fault, (3) Takhin fault, and (4) faults in the saddle area at Haines. Southeastern Alaska lies in one of the two most seismically active zones in Alaska, a State where 6 percent of the world's shallow earthqua

Open-File Report↗