USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research: Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2022

Three Mw ≥ 4.7 earthquakes within the Changning (China) shale gas field ruptured shallow faults intersecting with hydraulic fracturing wells

From 2017 to 2019, three destructive earthquakes (27 January 2017 Mw 4.7, 16 December 2018 Mw 5.2, and 3 January 2019 Mw 4.8) occurred in the Changning shale gas field in the southwest Sichuan Basin, China. Previous seismological studies attributed these events to hydraulic fracturing (HF), but were unable to identify the causative seismogenic faults and their slip behaviors. Here, we use Sentinel-1 synthetic aperture radar data to measure surface deformation triggered by the three events and conduct geodetic inversions to characterize their rupture models. The resulting coseismic interferograms show prominent surface deformation with the maximum line-of-sight displacements of up to 4 cm. The inversion results show that all three earthquakes mainly ruptured sedimentary formations above the shale gas bed, in the upper 3 km of the crust, with slip magnitudes ranging from 8.5 to 15 cm, and stress drops ranging from ∼1.8 to ∼3.3 MPa. Their source faults intersect with horizontal HF wells, but do not root in the crystalline basement. Combined with the reported difficulty of increasing HF operation pressures prior to the three events, we argue that they were most likely induced by direct injection of pressurized fluids into the fault zones. Crustal deformation patterns inferred from regional topography and GPS velocities highlight that the Changning field is located within a triple junction region near the southeastern margin of the Tibetan Plateau with large deformation gradients; such conditions are not only favorable to the development of critically stressed faults, but also facilitate the occurrence of at least moderate magnitude earthquakes.

Changning shale gas field, Sichuan Basin↗
USGS2022

Synthetic evaluation of infrasonic multipole waveform inversion

Acoustic source inversions estimate the mass flow rate of volcanic explosions or yield of chemical explosions and provide insight into potential source directionality. However, the limitations of applying these methods to complex sources and their ability to resolve a stable solution have not been investigated in detail. We perform synthetic infrasound waveform inversions that use 3-D Green’s functions for a variety of idealized and realistic deployment scenarios using both a flat plane and Yasur volcano, Vanuatu as examples. We investigate the ability of various scenarios to retrieve the input source functions and relative amplitudes for monopole and multipole (monopole and dipole) inversions. Infrasound waveform inversions appear to be a robust method to quantify mass flow rates from simple sources (monopole) using deployments of infrasound sensors placed around a source, but care should be taken when analyzing and interpreting results from more complex acoustic sources (multipole) that have significant directional components. In the examples we consider the solution is stable for monopole inversions with a signal-to-noise ratio greater than five and the dipole component is small. For most scenarios investigated, the vertical dipole component of the multipole explosion source is poorly constrained and can impact the ability to recover the other source term components. Because multipole inversions are ill-posed for many deployments, a low residual does not necessarily mean the proper source vector has been recovered. Synthetic studies can help investigate the limitations and place bounds on information that may be missing using monopole and multipole inversions for potentially directional sources.

Journal of Geophysical Research-Solid Earth↗
USGS2022

Microgravity change during the 2008-2018 Kı̄lauea summit eruption: Nearly a decade of subsurface mass accumulation

Results from nine microgravity campaigns from Kı̄lauea, Hawaiʻi, spanning most of the volcano's 2008–2018 summit eruption, indicate persistent mass accumulation at shallow levels. A weighted least squares approach is used to recover microgravity results from a network of benchmarks around Kı̄lauea's summit, eliminate instrumental drift, and restore suspected data tares. A total mass of 1.9 × 10 11 kg was determined from these microgravity campaigns to have accumulated below Kı̄lauea Caldera during 2009–2015 at an estimated depth of 1.3 km below sea level. Only a fraction of this mass is reflected in surface deformation, and this is consistent with previously reported discrepancies between subsurface mass accumulation and observed surface deformation. The discrepancy, amongst other independent evidence from gas emissions, seismicity, and continuous gravimetry, indicate densification of magma in the reservoirs below the volcano summit. This densification may have been driven by degassing through the summit vent. It is hypothesized that during the final years of the summit eruption, magma densification resulted in a buildup of pressure in the reservoirs that may have contributed to the lower East Rift Zone outbreak of 2018. The observed mass accumulation beneath Kı̄lauea could not have been detected through other techniques and illustrates the importance of microgravity measurements in volcano monitoring.

Hawai'i↗
USGS2023

High-resolution InSAR reveals localized pre-eruptive deformation inside the crater of Agung Volcano, Indonesia

During a volcanic crisis, high-rate, localized deformation can indicate magma close to the surface, with important implications for eruption forecasting. However, only a few such examples have been reported, because frequent, dense monitoring is needed. High-resolution Synthetic Aperture Radar (SAR) is capable of achieving <1 m spatial resolution and sub-weekly revisit times, but is under-used. Here we use high-resolution satellite SAR imagery from COSMO-SkyMed, TerraSAR-X, and Sentinel-1 to detect intra-crater uplift preceding the November 2017 onset of eruptive activity at Agung, Indonesia. Processing the SAR imagery with an up-to-date, accurate, high-resolution digital elevation model was crucial for preventing aliasing of the deformation signal and for accurate georeferencing. We show that >15 cm of line-of-sight shortening occurred over a 400-by-400 m area on the crater floor in September-October 2017, accompanying a deep seismic swarm and flank dyke intrusion. We attribute the deformation to the pressurization of a shallow (<200 m deep) hydrothermal system by the injection of magmatic gases and fluids. We also observe a second pulse of intra-crater deformation of 3–5 cm within 4 days to 11 hr prior to the first phreatomagmatic eruption, which is consistent with interaction between the hydrothermal system and the ascending magma. This phreatomagmatic eruption created the central pathway used during the final stages of magma ascent. Our observations have important implications for understanding unrest and eruption forecasting, and demonstrate the potential of monitoring with high-resolution SAR.

Agung Volcano, Bali↗
USGS2023

Identification of seismo-volcanic regimes at Whakaari/White Island (New Zealand) via systematic tuning of an unsupervised classifier

We present an algorithm based on Self-Organizing Maps (SOM) and k-means clustering to recognize patterns in a continuous 12.5-year tremor time series recorded at Whakaari/White Island volcano, New Zealand (hereafter referred to as Whakaari). The approach is extendable to a variety of volcanic settings through systematic tuning of the classifier. Hyperparameters are evaluated by statistical means, yielding a combination of “ideal” SOM parameters for the given data set. Extending from this, we applied a Kernel Density Estimation approach to automatically detect changes within the observed seismicity. We categorize the Whakaari seismic time series into regimes representing distinct volcano-seismic states during recent unrest episodes at Whakaari (2012/2013, 2016, and 2019). There is a clear separation in classification results between background regimes and those representing elevated levels of unrest. Onset of unrest is detected by the classifier 6 weeks before the August 2012 eruption, and ca. 3.5 months before the December 2019 eruption, respectively. Regime changes are corroborated by changes in commonly monitored tremor proxies as well as with reported volcanic activity. The regimes are hypothesized to represent diverse mechanisms including: system pressurization and depressurization, degassing, and elevated surface activity. Labeling these regimes improves visualization of the 2012/2013 and 2019 unrest and eruptive episodes. The pre-eruptive 2016 unrest showed a contrasting shape and nature of seismic regimes, suggesting differing onset and driving processes. The 2016 episode is proposed to result from rapid destabilization of the shallow hydrothermal system, while rising magmatic gases from new injections of magma better explain the 2012/2013 and 2019 episodes.

Whakaari, White Island↗
USGS2012

Tide gage measurements of uplift along the south coast of Alaska

Annual mean sea levels along the south coast of Alaska are used to measure uplift along the Alaska‐Aleutian subduction zone. Oceanographic effects are removed from the observed annual mean sea levels by subtracting a correction that is proportional to the sea level fluctuations observed in southeast Alaska. That correction is effective in reducing fluctuations in the observed, annual mean sea level as far west as the tip of Alaska peninsula. Additional corrections to remove the eustatic rise in sea level and the apparent fall in sea level due to postglacial isostatic rebound of the land are introduced. This corrected sea level record should provide a measure of tectonic subsidence. In the area affected by the 1964 Alaska earthquake, postseismic uplift occurs where coseismic subsidence was observed, and postseismic subsidence occurs where coseismic uplift was observed. The immediate postseismic response is damped out within the first decade, and the subsequent uplift rates appear to be steady over the 1974–1989 interval. However, some of those rates seem to be too high to be sustained over the ∼1000 year earthquake recurrence interval appropriate to this area if the interseismic deformation is only to recover the coseismic displacement. Thus a long‐term ( ∼100 years) relaxation in uplift rates is postulated. The immediate (time constant ∼5 years) postseismic relaxation is attributed to postseismic slip on the plate interface directly downdip from the coseismic rupture. The long‐term (time constant ∼100 years) relaxation is attributed to flow in the asthenosphere.

Alaska↗
USGS2012

Basin and range crustal and upper mantle structure, northwest to central Nevada

We present an interpretation of the crustal and uppermost mantle structure of the Basin and Range of northwestern Nevada based on seismic refraction/wide‐angle reflection, near‐vertical reflection, and gravity data. In comparison to most previous estimates, we find that the crust is somewhat thicker (32–36 km versus 22–30 km), and the uppermost mantle velocity is somewhat higher (8.0 km/s versus 7.3–7.9 km/s). Along our transects, the crust is thinnest (32 km) in the Carson Sink‐Buena Vista Valley region and increases by 2–4 km to the west and east, respectively. There is considerable complexity throughout the crust where velocities range from of 2.5 km/s at the surface to 7.4 km/s in the lowermost crust. Variations in velocity and structure of the upper crustal layers reveal apparent basement velocity depressions (areas of lower velocities extending up to 10 km in depth) that underlie some surface ranges as well as the basins. The middle crust rises from about 20 km beneath central Nevada to within 12 km of the surface beneath the area of thinnest crust and is characterized by a modest (∼0.1 km/s) change in velocity and low‐velocity gradients. These midcrustal layers mark the onset of high crustal reflectivity and the apparent limiting depth to which Basin and Range faults can be traced in near‐vertical reflection profiles, suggesting that these midcrustal layers represent the transition between the brittle and ductile zones of the crust. The lower crust is more structurally complex, with layers thickening and thinning in a systematic manner with the upper crustal layers; generally, where there are velocity depressions in the upper crust, the lower crust is thickest and shallowest. The geometry of these lower crustal layers (derived from refraction modeling) coincides with changes in the crustal reflectivity, determined from the Consortium of Continental Reflection Profiling reflection data. The lower crustal layer is unusually high in velocity (7.4 km/s) and is likely the layer identified as mantle in some previous studies. We do not identify the 7.4 km/s layer as mantle because (1) there is an underlying layer with a velocity (8.0 km/s) that is more consistent with the worldwide average velocity for the upper mantle, and (2) the 7.4 km/s layer does not correspond to the “reflection” Moho. Gravity modeling and comparison to existing seismic models show a general consensus in many aspects with respect to crustal structure. This new model forms the basis for speculation on some of the processes associated with rifting of the Basin and Range Province. One such process, lithospheric magmatism, is inferred from the strong attenuation of transmitted seismic waves, which occurs at the same interface at which high‐amplitude, bright spot reflections originate. Unlike previous models, the overall structure and velocity of the crust and uppermost mantle of our new model are similar to other regions worldwide which have undergone high degrees of extension.

Nevada↗
USGS2012

The velocity field along the San Andreas Fault in central and southern California

The velocity field within a 100‐km‐broad zone centered on the San Andreas fault between the Mexican border and San Francisco Bay has been inferred from repeated surveys of trilateration networks in the 1973–1989 interval. The velocity field has the appearance of a shear flow that remains parallel to the local strike of the fault even through such major deflections as the big bend of the San Andreas fault in the Transverse Ranges of southern California. Across‐strike profiles of the fault‐parallel component of velocity exhibit the expected sigmoidal shape, whereas across‐strike profiles of the fault‐normal component of velocity are flat and featureless. No significant convergence upon the fault is observed even along the big bend sector of the fault. Simple dislocation models can explain most of the features of the observed velocity field, but those explanations are not unique. About 35 mm/yr of relative plate motion is accounted for within the span of the trilateration networks. Geologic studies indicate that the secular slip rate on the San Andreas fault is about 35 mm/yr. The agreement between these two estimates implies that most of the strain accumulation is elastic and will be recovered in subsequent earthquakes. The relative motion observed across the San Andreas fault (35 mm/yr) plus that observed across the Eastern California shear zone (8 mm/yr) accounts for most (43 mm/yr) of the observed North America‐Pacific relative plate motion (47 mm/yr).

California↗
USGS2012

Seismic reflection/refraction mapping of faulting and regional dips in the eastern Alaska Range

We present the results of a Trans‐Alaska Crustal Transect (TACT) investigation of the upper 2–5 km of the eastern Alaska Range in the vicinity of the Denali fault based on seismic reflection/refraction data, laboratory measurements of rock velocities, and structural mapping. The Denali fault is a major dextral slip structure mappable for more than 2000 km separating the Wrangellia and adjacent terranes to the south from the Yukon‐Tanana and adjacent terranes to the north. Geologic mapping suggests over 400 km of dextral slip has occurred on the fault, yet within the upper 1.5 km of the crust along the TACT corridor, basement rocks juxtaposed along the Denali fault reveal no significant seismic velocity differences, although the fault zone itself is associated with a minor lowering of velocity. The lack of seismic velocity contrast adjacent to the fault is in agreement with laboratory measurements of elastic wave velocities of samples from terranes bordering the fault. Laboratory measurements of elastic wave velocities of the metasedimentary mica‐quartz schists comprising the Yukon‐Tanana basement are highly anisotropic because of preferred orientation of mica and predict significant variations in velocity accompanying variations in foliation dip. Although other interpretations are possible, the northward shallowing of foliation dip of basement rocks in the Yukon‐Tanana terrane combined with the strong anisotropy associated with these highly foliated rocks can explain an observed northward increase in seismic velocity within this terrane. Seismic reflections from basement rocks within the Yukon‐Tanana terrane may originate from variations in anisotropy with depth and/or changes in composition reflecting different proportions of sandstone and shale in the protolith.

Alaska↗
USGS2012

An axial view of a metamorphic core complex: Crustal structure of the Whipple and Chemehuevi Mountains, southeastern California

A 135‐km‐long, NW‐SE trending, seismic refraction/wide‐angle reflection profile provides a unique along‐strike view of the crustal structure of a belt of metamorphic core complexes in southeastern California: the Whipple, Chemehuevi, and Sacramento mountains metamorphic core complexes. Interpretation of the seismic data was done by two‐dimensional forward modeling of travel times and amplitudes. The final model consists of (1) a thin (< 1.5 km) veneer of upper plate and fractured lower plate rocks (velocities of 1.5–5.3 km s −1 ) overlying a fairly homogeneous basement with velocities of 6.0 km s −1 ; (2) a localized, high‐velocity (6.4 km s −1 ) body, situated directly beneath the Whipple Mountains; (3) a 6.3–6.4 km s −1 middle crust that is thickest beneath the core complexes; (4) a 6.65±0.15 km s −1 lower crust; (5) crustal thickness of 27 km with a deeper crustal root (3 km) beneath the Whipple Mountains metamorphic core complex; and (6) a P n velocity of 8.0±0.10 km s −1 . The crustal structure that underlies the belt of metamorphic core complexes provides new insights into the processes that control extension in the deep crust. Upper crustal velocities are higher beneath the Whipple Mountains (where velocities increase to 6.4 km s −1 at ∼5 km depth) than beneath the Chemehuevi and Sacramento mountains. In addition, midcrustal discontinuities rise 2–5 km beneath the Whipple complex compared to the other complexes. These observations support greater uplift and a slightly deeper midcrustal origin for the rocks now exposed in the core of the Whipple Mountains compared to rocks in the Chemehuevi and Sacramento mountains. Despite the enhanced uplift and extension in the Whipple Mountains, the crust is thicker here (30 km) than anywhere else along the Colorado River extensional corridor. This may be in part a relic of compressional and magmatic thickening during the Mesozoic. However, we suggest that inflation of the crust during Tertiary extension was the dominant mechanism. Both mantle‐derived magmatism and lateral ductile inflow in the crust are proposed.

Arizona, California↗
USGS2012

Introduction to special section on the California-Arizona crustal transect: CACTIS, Part 3

The CACTIS (California‐Arizona Crustal Transect Interim Synthesis) workshop in May 1988 brought researchers together in Flagstaff, Arizona, to discuss the geologic evolution and crustal structure of the southern Cordillera between the San Andreas fault in southeastern California and the Colorado Plateau in Arizona [ Sass et al ., 1988]. The first set of papers resulting from the workshop appeared in the Journal of Geophysical Research (JGR) as the special CACTIS 1 section in January 1990 [ Howard et al ., 1990], and a second as CACTIS 2 in November 1990 [ Haxel et al ., 1990]. Twelve papers in this issue form part 3 of the CACTIS series. A final collection of papers will appear in the future as a joint special section with the California Consortium for Crustal Studies (CALCRUST).

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation in western Washington

The Juan de Fuca plate is subducted beneath the North American plate off the coast of Washington at a rate of about 40 mm/yr N68°E. The average principal strain rates (extension reckoned positive) measured in northwestern Washington are as follows: Olympic peninsula 25 km south of Port Angeles from 1982 through 1990, and and near Seattle from 1972 through 1985, and . Both strain measurements are consistent with uniaxial contraction in the direction of plate convergence. Uplift rates inferred from tide gage recordings are about 4 mm/yr on the Pacific coast and near 0 mm/yr farther inland near Seattle. These deformation rates are consistent with a model of the Cascadia subduction zone in which the plate interface beneath the continental slope and outer continental shelf is locked but free to slip farther landward. The limited downdip extent of the locked segment of the plate interface is consistent with a shallow depth (∼20 km) of the isotherm (∼450°C) that defines the brittle‐ductile transition. Small thrust events diagnostic of seismic subduction should then occur only offshore and at shallow depths. The principal strain rates measured from 1972 through 1983 in the back arc region near Richland, Washington, are and .

Washington↗
USGS2012

Strain accumulation along the Denali Fault at the Nenana River and Delta River Crossings, Alaska

Surveys of trilateration networks across the Denali fault at the Nenana River in 1982, 1984, and 1988 and at the Delta River in 1975, 1979, 1982, and 1984 indicate a minor (0.10±0.04 μstrain/yr) northeastward uniaxial extension. The component of right‐lateral shear‐strain accumulation across the fault is not significant at the two‐standard‐deviation level. At the Delta River network the strain accumulation rate decreases rapidly with distance from the fault, but evidence for a similar decrease with distance from the fault is lacking at the Nenana River network. The strain accumulation rates inferred from trilateration are consistent with the very long baseline interferometry (VLBI) measurement reported by Ma et al. (1990) and support their contention that significant right‐lateral shear is not accumulating along the Denali fault at the present time. Savage et al. (1981) had earlier concluded erroneously that preliminary geodetic measurements at the Delta River network demonstrated right‐lateral shear strain accumulation. The absence of significant right‐lateral deformation across the Denali fault in the 1975–1988 interval is in marked contrast with the abundant geomorphic evidence for Holocene right‐lateral secular slip at the rate of 10–20 mm/yr on the Denali fault in this sector.

Alaska↗
USGS2012

Crustal subsidence and extension and Medicine Lake volcano, northern California

The pattern of historical ground deformation, seismicity, and crustal structure near Medicine Lake volcano illustrates a close relation between magmatism and tectonism near the margin of the Cascade volcanic chain and the Basin and Range tectonic province. Between leveling surveys in 1954 and 1989 the summit of Medicine Lake volcano subsided 389±43 mm with respect to a reference bench mark 40 km to the southwest (average rate = 11.1±1.2 mm/yr). A smaller survey across the summit caldera in 1988 suggests that the subsidence rate was 15–28 mm/yr during 1988–1989. Swarms of shallow earthquakes ( M ≤ 4.6) occurred in the region during August 1978, January–February 1981, and September 1988. Except for the 1988 swarm, which occurred beneath Medicine Lake caldera, most historical earthquakes were located at least 25 km from the summit. The spatial relation between subsidence and seismicity indicates (1) radially symmetric downwarping of the volcano's summit and flanks centered near the caldera and (2) downfaulting of the entire edifice along regional faults located 25–30 km from the summit. We propose that contemporary subsidence, seismicity, and faulting are caused by (1) loading of the crust by more than 600 km 3 of erupted products plus a large volume of mafic intrusives; (2) east‐west extension in the western Basin and Range province; and, to a lesser extent, (3) crystallization or withdrawal of magma beneath the volcano. Thermal weakening of the subvolcanic crust by mafic intrusions facilitates subsidence and influences the distribution of earthquakes. Subsidence occurs mainly by aseismic creep within 25 km of the summit, where the crust has been heated and weakened by intrusions, and by normal faulting during episodic earthquake swarms in surrounding, cooler terrain.

California↗
USGS2012

Rift flank uplifts and Hinterland Basins: Comparison of the Transantarctic Mountains with the Great Escarpment of southern Africa

Uplifted rift margins are a common feature of continents and oceans. Two variants of rift flank morphologies have been recognized: One in which the topography warps down from an inland high toward the continental margin, and one where the tropographic peak lies close to the continental margin. The Great Escarpment of southern Africa and the Transantarctic Mountains are examples of the first and the second variants of rift flanks, respectively. Both rift flanks are bordered on their landward side by broad continental basins: the Kalahari and the Wilkes hinterland basins. If these basins are interpreted as flexural “outer lows” that deepen in unison with the uplift of the rift flanks, the lithosphere on the uplifted side is very rigid in both cases (elastic thickness T e of 100 ± 20 km for southern Africa and 110 ± 20 km for East Antarctica). We suggest that the variation in rift flank morphology is caused by the isostatic response to uplift forces of elastic plates sharing different boundary conditions. We model the uplift of the Transantarctic Mountains as an upward deflection of an elastic plate which is broken at the front of the Transantarctic Mountains, and we model the uplift of the Great Escarpment as an upward deflection of a continuous elastic plate that is modified by the downward load of sediments on the continental margin. Although the Transantarctic Mountain uplift is young (60–0 Ma) and the southern African uplift is old (<100 Ma), the different isostatic responses of the two margins are not a function of age, because most loading (sedimentation) and unloading (erosion) took place shortly after rifting. Detailed modeling of topography, gravity, geological markers, and the locations of depocenters suggests that lithospheric rigidity decreases under the Transantarctic Mountains, whereas in southern Africa the decrease occurs not under the Great Escarpment but far seaward under the continental shelf and slope. If the distribution of lithospheric rigidity is indicative of the thermal regime of the lithosphere, then uplifted rift flanks are not always underlain by a thermal anomaly. This and other geological evidence indicate that a single mechanism cannot explain the uplift of both the Antarctic and the African margins.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Variations in the reflectivity of the moho transition zone beneath the Midcontinent Rift System of North America: results from true amplitude analysis of GLIMPCE data

True amplitude processing of The Great Lakes International Multidisciplinary Program on Crustal Evolution seismic reflection data from the Midcontinent Rift System of North America shows large differences in the reflectivity of the Moho transition zone beneath the axial rift, beneath the rift flanks, and outside of the rift. The Moho reflection from the axial rift has a discontinuous, diffractive character marginally stronger (several decibels) than an otherwise transparent lower crust and upper mantle. Beneath the axial rift, Moho is interpreted to be a synrift igneous feature. Beneath the rift flanks, the reflectivity of the Moho transition is generally well developed with two identifiable boundaries, although in places it is weakly reflective to nonreflective, similar to Moho outside the rift. The two boundaries are interpreted as the base of essentially intact, although stretched, prerift Archean crust (upper boundary) and new synrift Moho 1-2 s (6-7 km) deeper (lower boundary). Beneath the rift flanks, the layered reflection Moho transition results from the preexisting crustal composition and fabric modified by synrift igneous processes and extensional tectonic/metamorphic processes. The geologic evidence for extensive basaltic magmatism in the rift is the basis for interpreting the Moho signature as a Keweenawan structure that has been preserved for 1.1 b.y. Extension and magmatism appear to enhance reflectivity in the lower crust and Moho transition zone only where stretching factors are moderate (rift flanks) and not where they are extreme (axial rift). This leads to the prediction that the reflectivity across analogous volcanic passive continental margins should be greatest beneath the moderately stretched continental shelves and should decrease towards the ocean-continent boundary.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation across the Wasatch Fault near Ogden, Utah

Deformation of a 70 by 40‐km trilateration network spanning the north trending Wasatch fault near Ogden, Utah, has been monitored from 1972 through 1990. All but nine of the 200 measurements are consistent with deformation that is linear in time. We presume that those nine observations are contaminated by some blunder in making the measurements and that deformation is linear in time. The strain rate over the 1972–1990 interval across a 40‐km‐wide zone west of the Wasatch fault (hanging wall block) is adequately approximated by a 0.04 ± 0.01 μstrain/yr N85°E±5° uniaxial extension. Adequate coverage of the footwall block is available only over the 1981–1990 interval, and the strain rate across a 30‐km‐wide zone there is approximated by a 0.07 ± 0.03 μstrain/yr N20°E±12° uniaxial extension. The observed extension of the hanging wall block in the direction normal to fault strike suggests that the Wasatch fault may be listric; a planar fault would produce a zone of contraction normal to the fault at the surface of the hanging wall block. The component of extension parallel to fault strike observed on the footwall block is unexplained.

Utah↗
USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗