Historic conditions of MacDill AFB, Tampa Bay, Florida: Pre-settlement landscape
No abstract available.
Florida↗
SEARCH · USGS Science
Results for “Journal of Earthquake Engineering (JEE)”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The mineral economy of Brazil--Economia mineral do Brasil
This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.
Data Series↗
Nonpoint-source pollutant discharges of the three major tributaries to Reelfoot Lake, west Tennessee, October 1987-September 1989
An investigation of the concentration and loads of nitrogen, phosphorus, and suspended sediment in storm runoff to Reelfoot Lake, in western Tennessee, was conducted from October 1987 through September 1989. Concentrations of selected herbicides also were defined. Reelfoot Lake, with a surface area of about 15,500 acres, is the largest natural lake in Tennessee and an important recreation and fisheries resource. Previous studies showed that the lake is hypereutrophic, a condition caused by high concentrations of nutrients in water and sediments discharged from the three principal tributaries (South Reelfoot Creek, North Reelfoot Creek, and Running Slough) to the lake. Pesticides, including herbicides, have been detected in the lake's bottom sediments. Storm runoff contributed about 87percent of the total water discharge of the three main tributaries to Reelfoot Lake. South Reelfoot Creek contributed about 4.7 tons per acre per year of suspended sediment, while North Reelfoot Creek contributed about 1.9 tons per acre per year. Running Slough contributed only about 0.31 ton per acre per year of suspended sediment. Most of the suspended sediment was transported by storm runoff between October and March. About 80 percent of the annual streamflow of the three tributaries occurs during these months. The North Reelfoot Creek basin contributed 8.2 pounds per acre per year of total nitrogen and 2.4 pounds per acre per year of total phosphorus. South Reelfoot Creek basin contributed about 6.5 and 1.3 pounds per acre per year of total nitrogen and phosphorus, respectively, while Running Slough basin contributions were 3.4 and 0.86 pounds per acre per year, respectively. The differences in nutrient yields appear to result from more row-crop agriculture and the relatively steeply sloping agricultural land in the North Reelfoot Creek basin. Ninety-one percent of the total nitrogen load and 95 percent of the total phosphorus load in the three streams was transported by storm runoff. Significant differences in the mean concentrations of nutrients in runoff were defined between the active agricultural months (April through September) and the inactive months (October through March). Storm-runoff samples were analyzed for II selected triazine herbicides. Alachlor and atrazine were the most commonly detected herbicides. Thirty-two percent of the samples contained detectable levels of alachlor and 93 percent of the samples contained detectable levels of atrazine. Ninety percent of the samples collected during the active agricultural months contained detectable leveki of alachlor and all 29 samples contained detectable levels of atrazine. Sixteen samples exceeded lifetime health-advisory levels for atrazine in drinking water (3 micrograms per liter); two samples collected from the April IS, 1988, storm at North Reelfoot Creek and South Reelfoot Creek contained 42 and 57 micrograms per liter of atrazine, respectively. Concentrations of the other nine triazine herbicides were generally less than the level of detection (0.1 microgram per liter).
Tennessee↗
Conventional hydrothermal power-producing systems of the Great Basin, USA
As part of the update to the electric-grade conventional hydrothermal assessment of the Great Basin, USA, Monte Carlo analyses of identified resources within explored regions will be performed to make estimates of discovered resources and associated uncertainty. Analyses use conditional statistics where estimates are conditioned upon a hydrothermal favorability map, allowing for the likelihood that more resources exist in regions of higher hydrothermal favorability. For these analyses, a dataset of identified hydrothermal systems is compiled, and the new compilation is described herein. Recognizing that a single hydrothermal system may be developed with multiple power plants, and that the hydrothermal upflow zone may be several kilometers across with many measurements characterizing a single hydrothermal system, a procedure was developed and employed to create clusters of points (power plants, measurements, etc.) that are associated with a single system, and a new central point was defined as the best estimator of the center of the hydrothermal system. Hydrothermal systems were uniquely identified by grouping electric-grade hydrothermal measurements and operating power plants within a distance of 10 km. Groups that are >10 km apart are assumed to be different electric-grade hydrothermal systems. While 10 km was used as the threshold, most systems were significantly further apart, and most points within groups were typically within 5 km of each other. A well measurement was considered an electric-grade measurement of a hydrothermal system if it had two properties: a measured temperature of >85 °C and evidence of hydrothermal convection. Other points that were added to the dataset are locations of operating powerplants or locations that have been classified as an electric-grade hydrothermal resource by either the U.S Geological Survey (USGS) or the Great Basin Center for Geothermal Energy. After all points are assigned to systems, new points were computed with the goal of identifying the center of the throat of the hydrothermal upflow zone. If operating powerplants exist for a system, then the arithmetic average of all power plant locations is used. Otherwise, if USGS made an estimate, that location is used. In the absence of both powerplants or USGS estimates, the arithmetic average of all electric-grade measurement locations is used. An example is shown of how these newly compiled locations might be ranked for uncertainty analyses, where higher confidence is assumed if measured temperature is higher and there are many supporting measurements indicating an electric-grade resource. In summary, 28 systems have operating power plants, an additional 78 systems are known identified electric-grade hydrothermal resources, and 99 new systems were identified as probable electric-grade systems with varying levels of confidence. These 205 locations are shown as a function of a recent hydrothermal favorability map, conceptually illustrating the conditional statistics that can be used to make estimates of the undiscovered resources of the Great Basin. An accompanying data release provides summaries of developed capacity by system and USGS estimates of likely total capacity and associated uncertainty.
Arizona, California, Idaho, Nevada, Oregon, Utah↗
Geologic framework, hydrostratigraphy, and ichnology of the Blanco, Payton, and Rough Hollow 7.5-minute quadrangles, Blanco, Comal, Hays, and Kendall Counties, Texas
During 2023, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised an initial characterization completed during 2015–16 of the geologic framework, hydrostratigraphy, and ichnology of the Edwards and Trinity aquifers in the Blanco, Payton, and Rough Hollow 7.5-minute quadrangles in Blanco, Comal, Hays, and Kendall Counties, Texas. The purpose of this report is to present the updated geologic framework, hydrostratigraphy, and ichnology of the Trinity and Edwards Groups in those quadrangles. Rocks exposed in the study area are of the Lower Cretaceous Trinity Group and lower part of the Fort Terrett Formation of the Lower Cretaceous Edwards Group. The faulting and fracturing in the study area are part of the Balcones Fault Zone, an extensional system of faults active during the Paleocene to middle Eocene that generally trends southwest to northeast in south-central Texas. Hydrostratigraphically, the rocks exposed in the study area contain a section of the Edwards (Balcones Fault Zone) aquifer, upper zone of the Trinity aquifer, and middle zone of the Trinity aquifer. In the study area, the only hydrostratigraphic units of the Edwards (Balcones Fault Zone) aquifer remaining are (from top to bottom) VII and VIII, which cap several hills. The mapped hydrostratigraphic units of the upper zone of the Trinity aquifer are (from top to bottom) the cavernous, Camp Bullis, upper evaporite, fossiliferous, and lower evaporite. The mapped hydrostratigraphic units of the middle zone of the Trinity aquifer are (from top to bottom) the Bulverde, Little Blanco, Twin Sisters, Doeppenschmidt, Herff Falls (where present), Rust, Honey Creek, Hensell, and Cow Creek hydrostratigraphic units.
Texas↗
Chemical evolution and estimated flow velocity of water in the Trinity Aquifer, south-central Texas
Three permeable zones with varying lithology and water chemistry compose the Trinity aquifer, a principal source of water in the 5,500- square-mile study area in south-central Texas. The upper permeable zone locally yields small quantities of water to wells and was not included in this study. The middle permeable zone primarily is composed of limestone with minor amounts of dolostone. Terrigenous sand and marine limestone, with minor amounts of dolostone, are the principal lithologic units in the lower permeable zone. Dissolved solids concentrations range from 329 to 1,820 milligrams per liter in water samples from the middle permeable zone and from 518 to 3,030 milligrams per liter in water samples from the lower permeable zone. Principal hydrochemical facies in the middle permeable zone are calcium magnesium bicarbonate and calcium magnesium sulfate. Hydrochemical facies in ground-water samples from the lower permeable zone vary. Tritium concentrations as large as 5.3 tritium units in the southeastern part of the study area are indicative of relatively recent recharge. Results of a geochemical mass balance simulation along a flowpath in the middle permeable zone indicate a mass transfer of 4.25 millimoles per liter of dolomite dissolved, 5.74 millimoles per liter of gypsum dissolved, 0.46 millimole per liter of sodium chloride dissolved, 8.07 millimoles per liter of calcite precipitated, and 0.67 millimole per liter of calcium-for-sodium cation exchange between solid and aqueous phases. These results support dedolomitization as a principal chemical process in the middle permeable zone of the Trinity aquifer. Results of a simulation along a flowpath in the lower permeable zone indicate a mass transfer of 0.41 millimole per liter of dolomite dissolved, 0.001 millimole per liter of gypsum dissolved, 9.58 millimoles per liter of sodium chloride dissolved, 1.09 millimoles per liter of calcite precipitated, and 1.11 millimoles per liter of sodium-forcalcium cation exchange between solid and aqueous phases. Lower permeable zone processes indicate sodium chloride dissolution, dedolomitization, and cation exchange. Ground-water-flow velocities determined from adjusted carbon-14 ages, calculated using NETPATH, for selected flowpaths in the middle and lower permeable zones were about 1.7 feet per year and less than about 4.4 feet per year, respectively.
Texas↗
Formation of the Mount Weld rare earth deposit, Western Australia: Geochronology constraints
Constraining the age of protracted chemical weathering in stable cratonic areas that may form thick regoliths and the potential enrichment of various elements is challenging. Economic deposits of aluminium, iron, copper, nickel, cobalt, niobium, and rare earth elements (REEs) form in this manner. Determining the age of formation can provide key information for exploration of similar deposits as well as to better constrain paleoclimatic conditions. This study describes our effort to constrain the age of formation of the Mount Weld deposit, a world-class carbonatite-derived REE laterite deposit. We utilize multiple geochronological techniques on different minerals. The oldest dates, ranging from ca. 100 to 50 Ma, were from laser ablation ICPMS, Lu-Hf dating of churchite, a heavy REE phosphate mineral formed by mineral saturation in groundwater. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane, a potassium-bearing manganese oxide mineral, yielded ages ranging from ca. 40 to 26 Ma. Similarly, (U–Th)/He geochronology of goethite yielded ages from ca. 45 to 19 Ma.
Mount Weld deposit↗
Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota
Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.
South Dakota↗
Geochemistry of and radioactivity in ground water of the Highland Rim and Central Basin aquifer systems, Hickman and Maury counties, Tennessee
A reconnaissance of the geochemistry of and radioactivity in ground water from the Highland Rim and Central Basin aquifer systems in Hickman and Maury Counties, Tennessee, was conducted in 1989. Water in both aquifer systems typically is of the calcium or calcium magnesium bicarbonate type, but concentrations of calcium, magnesium, sodium, potassium, chloride, and sulfate are greater in water of the Central Basin system; differences in the concentrations are statistically significant. Dissolution of calcite, magnesium-calcite, dolomite, and gypsum are the primary geochemical processes controlling ground-water chemistry in both aquifer systems. Saturation-state calculations using the computer code WATEQF indicated that ground water from the Central Basin system is more saturated with respect to calcite, dolomite, and gypsum than water from the Highland Rim system. Geochemical environments within each aquifer system are somewhat different with respect to dissolution of magnesium-bearing minerals. Water samples from the Highland Rim system had a fairly constant calcium to magnesium molar ratio, implying congruent dissolution of magnesium-bearing minerals, whereas water samples from the Central Basin system had highly variable ratios, implying either incongruent dissolution or heterogeneity in soluble constituents of the aquifer matrix. Concentrations of radionuclides in water were low and not greatly different between aquifer systems. Median gross alpha activities were 0.54 picocuries per liter in water from each system; median gross beta activities were 1.1 and 2.3 picocuries per liter in water from the Highland Rim and Central Basin systems, respectively. Radon-222 concentrations were 559 and 422 picocuries per liter, respectively. Concentrations of gross alpha and radium in all samples were substantially less than Tennessee’s maximum permissible levels for community water-supply systems. The data indicated no relations between concentrations of dissolved radionuclides (uranium, radium-226, radium-228, radon-222, gross alpha, and gross beta) and any key indicators of water chemistry, except in water from the Highland Rim system, in which radon-222 was moderately related to pH and weakly related to dissolved magnesium. The only relation among radiochemical constituents indicated by the data was between radium-226 and gross alpha activity; this relation was indicated for water from both aquifer systems.
Tennessee↗
Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks
Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.
Lassen Peak, Mount Shasta↗
Geologic map of the Sierra Nevada, California and western Nevada
THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation
California, Nevada↗
Anaerobic biodegradation of perfluorooctane sulfonate (PFOS) and microbial community composition in soil amended with a dechlorinating culture and chlorinated solvents
Perfluorooctane sulfonate (PFOS), one of the most frequently detected per - and polyfluoroalkyl substances (PFAS) occurring in soil, surface water, and groundwater near sites contaminated with aqueous film-forming foam (AFFF), has proven to be recalcitrant to many destructive remedies, including chemical oxidation. We investigated the potential to utilize microbially mediated reduction (bioreduction) to degrade PFOS and other PFAS through addition of a known dehalogenating culture, WBC-2, to soil obtained from an AFFF-contaminated site. A substantial decrease in total mass of PFOS (soil and water) was observed in microcosms amended with WBC-2 and chlorinated volatile organic compound (cVOC) co-contaminants — 46.4 ± 11.0 % removal of PFOS over the 45-day experiment. In contrast, perfluorooctanoate (PFOA) and 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations did not decrease in the same microcosms. The low or non-detectable concentrations of potential metabolites in full PFAS analyses, including after application of the total oxidizable precursor assay, indicated that defluorination occurred to non-fluorinated compounds or ultrashort-chain PFAS. Nevertheless, additional research on the metabolites and degradation pathways is needed. Population abundances of known dehalorespirers did not change with PFOS removal during the experiment, making their association with PFOS removal unclear. An increased abundance of sulfate reducers in the genus Desulfosporosinus (Firmicutes) and Sulfurospirillum (Campilobacterota) was observed with PFOS removal, most likely linked to initiation of biodegradation by desulfonation. These results have important implications for development of in situ bioremediation methods for PFAS and advancing knowledge of natural attenuation processes.
Science of the Total Environment↗
Factors affecting the distribution of water-bearing fractures in the bedrock aquifers of West Virginia
Bedrock aquifers cover 23,601 square miles within the State of West Virginia and comprise 97.4 percent of the surficial area within the State; the remaining 2.6 percent (621 square miles) consists of alluvial sand-and-gravel and glacial outwash aquifers bordering the State’s major rivers. While West Virginia’s alluvial aquifers have been studied extensively, bedrock aquifers have only been characterized for studies completed in a few areas in Jefferson, McDowell, and Monroe Counties. Bedrock aquifers are water supplies for public supply, agriculture, industry, and residential homeowner use. In this study, the U.S. Geological Survey, in cooperation with the West Virginia Department of Environmental Protection Division of Water and Waste Management, provides a statewide assessment of the occurrence and distribution of fractures within bedrock aquifers of the State and the various topographic, physiographic, and lithologic influences controlling the occurrence and distribution of bedrock fractures. The results of this study provide an increased understanding of the distribution of fractures in bedrock aquifers in West Virginia and help to verify trends that have been suspected for many years but were never well documented or verified by data. The results confirmed that the density of fractures and those that were determined to be water bearing decrease significantly with depth. A statistically significant difference in the density of fractures was observed at a depth of 215 feet for wells in the Appalachian Plateaus Physiographic Province’s and in the Valley and Ridge Physiographic Province’s aquifers; a higher density of fractures and water-bearing fractures were above a depth of 215 feet than below that depth. This is an important consideration when drilling wells for residential, commercial, industrial, or agricultural water supply. Abandoned underground coal mines are commonly believed to form large pools of water in the interconnected mine entries in abandoned room and pillar coal mines. Such pools of water can and do exist in abandoned underground coal mines, but many mines lack open entries and are held up by overburden strata and pillars that can collapse and form aquifers comprised of vast interconnected rubble zones (gob), especially in older mines. Data assessed for this study showed that shale-corrected values of effective porosity for limestone aquifers in West Virginia had a median value of 2 percent and an average value of 4 percent and generally are mineralized with low effective porosity. Argillaceous or sandy limestone has a median shale-corrected porosity of 4 percent and an average shale-corrected porosity of 5 percent. The median and average shale-corrected porosity of sandstone aquifers was estimated to be 14 percent, but the median shale-corrected porosity for argillaceous or calcareous sandstone was 5 percent and the average shale-corrected porosity for argillaceous or calcareous sandstone was 6 percent. Even though shale has a relatively high total sonic porosity compared to other lithologies, shale and siltstone had relatively low shale-corrected porosity, ranging from 0 to 2 percent. Well yields were previously documented to be highest in valley settings, lowest on hilltops, and intermediate on hillsides. Transmissivity data provided by this study confirm this general pattern within the Appalachian Plateaus Province; however, the Valley and Ridge Province does not follow this pattern. While still lowest on hilltop settings, the highest well yields were in hillside settings. The trend for the Valley and Ridge Province was likely skewed because of 9 high-yield wells specifically targeting deeper thin limestone units, such as the Tonoloway and Helderberg Limestones, at depths with transmissivity in excess of 2,000 feet squared per day in Mineral County, West Virginia, or targeting karst aquifers in Berkeley, Jefferson, or Greenbrier Counties, West Virginia. Finally, water-bearing fractures have been hypothesized to comprise a small number of all fractures within a typical bedrock well in West Virginia. Data collected for this study support this theory. A total of 3,403 fractures were identified during this study; 3,151 (92.6 percent) of those fractures are low-transmissive, and only 252 (7.4 percent) fractures are water-bearing. Even though a well may contain many fractures, less than 8 percent are considered water-bearing fractures.
West Virginia↗
Linking permafrost to the abundance, biomass, and energy density of fish in Arctic headwater streams
Permafrost thaw alters groundwater flow, river hydrology, stream-catchment interactions, and the availability of carbon and nutrients in headwater streams. The impact of permafrost on watershed hydrology and biogeochemistry of headwater streams has been demonstrated, but there is little understanding of how permafrost influences fish in these ecosystems. We examined relations among permafrost characteristics, the resulting changes in water temperature, stream hydrology (e.g., discharge flashiness), and macroinvertebrates, with the abundance, biomass, and energy density of juvenile Dolly Varden ( Salvelinus malma ) and Arctic Grayling ( Thymallus arcticus ) across 10 headwater streams in northwestern Alaska. Macroinvertebrate density was driven by concentrations of dissolved carbon and nutrients supporting stream food webs. Dolly Varden abundance was primarily related to water temperature with fewer fish in warmer streams, whereas Dolly Varden energy density decreased with the flashiness of the headwater streams. Dolly Varden biomass was related to both temperature and bottom-up food web effects. The energy density of Arctic Grayling decreased with warmer temperatures and discharge flashiness. These relations demonstrate the importance of terrestrial–aquatic connections in permafrost landscapes and indicate the complexity of landscape effects on fish. Because permafrost thaw is one of the most impactful changes occurring as the Arctic warms, an improved understanding of how stream temperature, hydrology, and bottom-up food web processes influence fish populations can aid forecasting of future conditions across the Arctic.
Alaska↗
Consideration of grid cell size to represent stream network geometry for the conterminous United States
No abstract available.
conterminous United States↗
Detailed investigation of a coastal plain-Piedmont fault contact in northeastern Virginia
A trench across the Dumfries fault of the Stafford fault zone near Stafford, Virginia (see Mixon and Newell, 1976) exposed a high-angle reverse fault juxtaposing Paleozoic Quantico Slate and Cretaceous Potomac Group rocks. A system of subsidiary reverse faults and small scale normal faults disrupt the Coastal Plain strata adjacent to the main fault. Cross-cutting relations and stratigraphic details indicate that the subsidiary faults in the Cretaceous rocks document a history of episodic deformation, in part active during accumulation of the Coastal Plain strata. Slickensides and stereo net analysis of theorientation of subsidiary reverse faults, normal faults, and bedding indicate that, through time, faulting consistently included right lateral separation.
Virginia↗
Global maps of critical mineral production in 2023
Introduction The global production of many mineral commodities, especially critical minerals, is concentrated in a few countries that have mineral resources and the infrastructure necessary to mine and process those resources. For this reason, the type and amount of mineral production differ by country. For example, many countries produce such metallic ores as gold and silver, whereas only a few countries produce magnesium, niobium, platinum-group metals, and rare earths. The concentration of mining and processing in certain countries necessitates the existence of a global supply chain. A mineral supply chain is the sequence of mining and processing of minerals and manufacturing of products. Mineral supply chains are global in scale, complex, and dynamic. Supply chain data can be used to understand how a country’s mineral resources and various economic, technical, and environmental factors affect the complexity of global supply chains. This fact sheet summarizes the world’s leading countries (those accounting for 5 percent or more of a commodity’s global production in 2023) for production of select mineral commodities (mainly critical minerals) in the mining and processing stages. These countries and the minerals they produce are synthesized on global maps to communicate the status of, and potential risk to, mineral commodity supply chains from geographic production concentration. Trade data from United Nations Statistics Division (2025) is used to support assessments of the observed production data.
Fact Sheet↗