USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of African Earth Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 43Linked to original sources
USGS2025

Hydrogeology of unconsolidated and bedrock aquifers along the Salmon River, including Malone, Franklin County, New York

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, investigated the hydrogeology of the unconsolidated and bedrock aquifers along the Salmon River corridor in northern Franklin County, New York. The study area covers roughly 147 square miles and includes the village of Malone and parts of the Towns of Malone, Bellmont, Burke, Constable, Westville, Bangor, Duane, and Franklin, New York. Groundwater is the primary source for water supply within the study area. Eighty-three percent of all residents use public water supplied from two production wells that draw water from a thick, highly productive sand-and-gravel aquifer likely receiving induced infiltration from the Salmon River. Twenty-four percent of the 187 verified domestic wells in the study area outside of the production well service area boundary are screened in typically discontinuous deposits of stratified sand and sand and gravel. Seventy-six percent of the wells are completed in bedrock aquifers including the Potsdam Sandstone, metamorphic rocks, Theresa Formation, and unknown bedrock. Characterizing and understanding potential groundwater resources is critical for protecting the quality of the groundwater. The information in this report may be used to guide delineation of groundwater contributing areas, assess potential threats to aquifers from both point and nonpoint sources, respond to contamination from spills or leaks from underground storage facilities or other sources, and to support assessments for future development of municipal water supplies.

New York↗
USGS2025

Kiloyear cycles of carbonate and Mg-silicate replacement at Von Damm hydrothermal vent field

The Von Damm vent field (VDVF) on the Mid-Cayman Rise in the Caribbean Sea is unique among modern hydrothermal systems in that the chimneys and mounds are almost entirely composed of talc. We analyzed samples collected in 2020 and report that in addition to disordered talc of variable crystallinity, carbonates are a major class of mineral at VDVF. The carbonate minerals include aragonite, calcite, magnesium-rich calcite, and dolomite. Talc and carbonate mineral textures indicate that, rather than replacing volcanic host rock, they precipitate from the mixing of hydrothermal fluids and seawater at the seafloor, occurring in chimneys and surrounding rubble. Alternating precipitation of this mineral assemblage is pervasive, with carbonate minerals typically being succeeded by talc, and with indications that in some cases talc and carbonate minerals replace one another. Stable carbon isotopic data indicate the carbonate minerals originate from the mixing of seawater and hydrothermal fluid, which is supported by U-Th data. Radiocarbon calcite ages and talc 234 U- 230 Th isochron ages indicate mineral ages spanning over thousands to tens of thousands of years. Analyses of these samples illustrate a dynamic system that transitions from carbonate-dominated to Mg-silicate−dominated precipitation over time scales of thousands of years. Our observations raise questions regarding the eventual fate of seafloor precipitates and whether carbonate and silicate minerals in such settings are sequestered and represented in the rock record.

Geology↗
USGS2026

Tectonic implications of transitional melting regimes from petrological, geochronological, and compositional characterization of the ophiolitic Seventymile terrane, Alaska, USA

New geochemical, U-Pb geochronology, and Sr-Nd-Hf isotope data provide evidence for the tectonic evolution of the Seventymile terrane in interior Alaska, USA. Ultramafic and mafic rocks of the Seventymile terrane are thought to represent components of a dismembered ophiolite and provide unique constraints on regional terrane evolution and accretion. The Seventymile ophiolite represents fragments of the Devonian to Permian Slide Mountain Ocean (SMO) that separated allochthonous and parautochthonous continental fragments of western North America. It now occurs as multiple thrust sheets containing Permian mafic and ultramafic rocks overlying and/or possibly imbricated with amphibolite-facies supracrustal rocks of allochthonous Yukon-Tanana terrane and parautochthonous North America. Seventymile klippen contain variably serpentinized peridotite, primarily harzburgite, low-grade meta-mafic rocks, and minor oceanic sedimentary rocks (argillite, chert, limestone, and metasandstone). Mafic rocks include gabbro to diabase, typically as dikes, veinlets, or rare massive stocks intruding peridotite. Mafic rocks also include greenstones of the Seventymile assemblage in klippen structurally underlying, and in shear zone contact with, ultramafic klippen. New trace element and radiogenic isotope data from mafic magmatic rocks associated with the Seventymile ultramafic bodies show evidence for a weakly subduction-modified mantle source, like the mantle source of normal mid-ocean-ridge basalt (N-MORB) or back-arc basin basalt (BABB). Seventymile assemblage greenstones are more heterogeneous. They range from N-MORB to enriched mid-ocean-ridge basalt (E-MORB) and ocean-island basalt (OIB), with a subset of samples indicative of continental arc affinity. These geochemistry results indicate that distinct tectonic environments are represented by at least two, and possibly three, lithological and structural units comprising the Seventymile terrane. Hf-Nd isotope systematics are consistent with a depleted MORB mantle (DMM)−like component that overlaps with Pacific MORB. Primary zircon is rare, but new in situ U-Pb data for gabbro and greenstone indicate ca. 274−272 Ma peak zircon and titanite crystallization. Scattered younger zircons define a ca. 255 Ma zircon peak and correspond to secondary crystallization associated with baddeleyite reaction of high-Si fluids during low-grade metamorphism. If Seventymile suites are contemporaneous, obduction associated with the closure of the SMO resulted in the stacking of ophiolitic packages representing distinct tectonomagmatic settings across the transition from pericontinental, to epicontinental, to distal ocean back-arc. Intrusions hosted in klippe of ultramafic rocks, plus the least subduction-modified greenstones underlying them, geologically and compositionally resemble Slide Mountain rocks of the Campbell Range formation in eastern Yukon and may provide a new piercing point across the Tintina fault.

Alaska, British Columbia↗
USGS2026

Velocity-independent dry friction on mica: A realization of ideal Amontons-Coulomb friction

The Amontons-Coulomb friction law assumes that the frictional force between materials is independent of sliding velocity. However, as Coulomb noted, this is a rough approximation, and a second-order dependence of friction on the logarithm of sliding velocity is incorporated in a commonly used ‘rate- and state-dependent’ friction representation. Here we conduct shear experiments on mica, a layer-structured mineral, at temperatures ranging from 25 to 200ºC and under normal stress of 100 MPa. The friction coefficient clearly depends on the logarithmic sliding velocity at 25ºC, but rate sensitivity decreases with increasing temperature until at 200ºC, the friction coefficient is independent of sliding velocity. Our findings could initiate the development of velocity-independent frictional materials, realizing the ideal Amontons-Coulomb friction.

Physical Review Letters↗
USGS2025

Magnitude, depth and methodological variations of spectral stress drop within the SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest Earthquake Sequence

We present the first ensemble analysis of the 56 different sets of results submitted to the ongoing Community Stress Drop Validation Study using the 2019 Ridgecrest, California, earthquake sequence. Different assumptions and methods result in different estimation of the source contribution to recorded seismograms, and hence to the source parameters (principally corner frequency, f c ⁠ , spectral stress drop, Δσ, and seismic moment, M 0 ⁠ ) obtained from modeling calculated source spectra. For earthquakes smaller than magnitude (M) 2.5 there is negligible correlation between the f c values obtained by different studies, implying that no present method is reliable using available data. For larger magnitude events, correlation between f c measurements of different studies, within even a small M range is always higher than spectral ⁠Δσ , because the f c measurements simply reflect the underlying physical decrease in f c with increasing M. We model the observed trends of submitted f c with both magnitude and depth. Most methods report an increase in spectral Δσ with M, although a magnitude‐invariant spectral Δσ is within the confidence limits. The depth dependence is smaller and depends on whether a study allows attenuation to vary with source depth; a combination of depth‐dependent attenuation correction, and depth‐dependent shear‐wave velocity can compensate for reported depth trends. We model the submitted values to remove differing M and depth variation to investigate the relative interevent variability. We find consistent relative variation between individual events, and also lower relative spectral Δσ in the northwest of the aftershock sequence, and higher on the cross fault and in the region of main fault intersection. This large‐scale comparison implies that absolute spectral Δσ estimates are dependent on the methods used; studies of different regions or using different methods should not be directly compared and improved constraints on path and site corrections are needed to resolve these absolute spectral Δσ differences.

California↗
USGS2026

Hydrogeologic framework and conceptual groundwater-flow model of the panhandle and northwest parts of the High Plains (Ogallala) aquifer in Oklahoma, 1998–2022

This study was conducted by the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, to update the hydrogeologic framework and conceptual flow model for the panhandle and northwest parts of the High Plains (Ogallala) aquifer in Oklahoma, which together compose the Ogallala aquifer focus area. The study included the construction of a potentiometric surface, and available geologic and hydrologic data were used to evaluate saturated thickness of the aquifer. The water budget for the updated conceptual groundwater-​flow model was based on estimated inflows and outflows for the 1998–2022 study period. Saturated thickness of the Ogallala aquifer averaged 127 and 116 feet for the panhandle and northwest parts, respectively. Groundwater withdrawals from the Ogallala aquifer for 1998–2022 averaged 422,054 and 39,645 acre-feet per year (acre-ft/yr) for the panhandle and northwest parts, respectively. Recharge, the primary inflow, was estimated at 0.63 inch per year for the 1998–2022 study period, with the panhandle part of the Ogallala aquifer receiving 175,068 acre-ft/yr and the northwest part of the Ogallala aquifer receiving 49,376 acre-ft/yr. Additional inflows included irrigation return flows, estimated at 8,111 and 642 acre-ft/yr for the panhandle and northwest parts, respectively, of the Ogallala aquifer. Net lateral groundwater flows, considered to be aquifer outflows, were estimated to account for 31,908 acre-ft/yr for the Ogallala aquifer focus area. Streambed seepage, which was an outflow of 5,535 acre-ft/yr, was only present in the northwest part of the Ogallala aquifer. Vertical leakage and saturated-zone evapotranspiration were considered negligible outflows. These findings provide a revised conceptual groundwater-flow model water budget for the Ogallala aquifer focus area in Oklahoma.

Colorado, Kansas, Oklahoma, Texas↗
USGS2026

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas↗
USGS2025

Bedrock geologic map of the Bellows Falls 7.5- x 15-minute quadrangle, Windham and Windsor Counties, Vermont, and Sullivan and Cheshire Counties, New Hampshire

Introduction The bedrock geology of the Bellows Falls 7.5- x 15-minute quadrangle, Vermont and New Hampshire, consists of polydeformed Ordovician to Devonian metasedimentary, metavolcanic, and metaplutonic rocks of the Connecticut Valley trough, Bronson Hill anticlinorium (or Bronson Hill terrane), and the Central Maine terrane. Previous work in this area includes a 1:62,500-scale published map and text (1946), State geologic maps of New Hampshire (1997) and Vermont (2011), and various maps and reports presented largely as parts of field trip guidebooks. A provisional open-file map of the geology of the Vermont part of the Bellows Falls 7.5- x 15-minute quadrangle, completed in 1997, is incorporated and revised on this map based on additional fieldwork. This study recognizes three major structural levels from west to east and from lowest to highest: (1) autochthonous rocks of the Connecticut Valley trough; (2) allochthonous rocks of the New Hampshire sequence and Bronson Hill arc in the Monroe thrust sheet (or nappe), including the Skitchewaug nappe; and (3) allochthonous rocks of the Fall Mountain thrust sheet or nappe.

New Hampshire, Vermont↗
USGS2024

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications↗
USGS2025

Assessment of coastal and fluvial morphodynamic changes using Structure-for-Motion: A case study of the Sfȃntu Gheorghe Mouth (Danube Delta, Romania)

The ability to accurately map erosion, flooding, and habitat loss in coastal environments is crucial for formulating national strategies aimed at preventing and mitigating the impacts of natural disasters. A fundamental component of this process is the implementation of coastal morphodynamics monitoring through Structure-from-Motion (SfM) techniques, utilizing high-resolution 2D/3D data obtained from aerial photogrammetry. To assess morphodynamic changes over a three-year period (2022 – 2024), several SfM-based photogrammetric studies were conducted, each year, in the Romanian sector of the Danube-Black Sea coastal zone, specifically at the mouth of one of the Danube River distributaries (Sf Gheorghe branch) into the Black Sea, and along the left bank, near Sf Gheorghe locality, located within the Danube Delta Biosphere Reserve (DDBR). The essential equipment for aerial photogrammetry comprises Unmanned Aerial Vehicles (UAVs) and Global Navigation Satellite Systems (GNSS). In this study, the UAV used was a DJI Mavic 3T (Enterprise/Thermal) drone, complemented by two Trimble R12i and R4 GNSS systems, as well as approximately 10 Ground Control Points (GCPs). Data acquisition and processing were carried out using specialized photogrammetric software (Agisoft Metashape) along with various GIS tools (e.g., Blue Marble Geographics Global Mapper and ESRI ArcMap). The photogrammetric products generated for the study, as detailed in this paper, include Digital Elevation Models (DEMs), Digital Terrain Models (DTMs), orthomosaics (orthophotos), and others. At Sfântu Gheorghe beach, a comparison between 2023 and 2024 photogrammetric surveys revealed that the left bank of the Sf. Gheorghe Arm, at the river mouth into the Black Sea, suffered from a twist (erosion) of up to 64 metres. Additionally, on the selected perimetre (total area of 31,910 square meters ) from the beach and dune zone of Sf. Gheorghe, an area of up to 16,202 square meters was eroded between 2023 and 2024. This contrasts with the period between 2022 and 2023, during which deposition predominated. Erosion at the Danube mouths and the adjacent Black Sea coastline is driven by a complex interaction of natural and anthropogenic factors. Natural processes, including subsidence, sea-level rise, and episodic extreme storm events, contribute significantly to coastal dynamics. Meanwhile, human-induced factors, such as upstream hydrotechnical works that limits sediment transport, cutting of navigation canals, as well as the exacerbating effects of climate change, further accelerate erosion. The recent Structure-from-Motion (SfM) surveys provide essential quantitative data, enabling a detailed analysis of both short-term and long-term morphodynamic changes influenced by seasonal variations and extreme hydrometeorological events in this highly dynamic coastal system.

Sfȃntu Gheorghe Mouth (Danube Delta)↗
USGS1976

The water quality of Livingston Reservoir on the Trinity River, Southeastern Texas

The concentrations of dissolved solids, chloride, and sulfate in Livingstone Reservoir on the Trinity River in southeastern Texas usually average less than 250 mg/1 (milligrams per litre), 40 mg/1, and 50 mg/1, respectively. The water is usually hard or moderately hard (61 to 180 mg/1 as calcium carbonate). The concentrations of principal dissolved constituents in the reservoir are usually maximum during summer and fall when evaporation is high and inflow is low. Thermal stratification of the reservoir usually begins in March and persists until September or October. Neither the seasonal variation of dissolved constituents in inflow to the reservoir nor thermal stratification has resulted in significant stratification of the principal dissolved constituents. However, thermal stratification has resulted in significant seasonal and areal variations of dissolved oxygen, which results in higher concentration of dissolved iron, dissolved manganese, total phosphorus, and total inorganic nitrogen.

Texas↗
USGS2024

3-D mapping of the conterminous U.S. within the USGS National Cooperative Geologic Mapping Program: Progress and future prospects

The U.S. Geological Survey (USGS) National Cooperative Mapping Program (NCGMP) is bringing together subsurface and three-dimensional information at multiple scales for the conterminous United States from data produced throughout the USGS and by federal and state partners. Components of this work include data inventory and catalog development, data integration and database development, and construction of subregional and basin-scale three-dimensional (3-D) geologic models. At small scales, the NCGMP is compiling subsurface data to create a limited number of subsurface layers that map the majority of the lower 48 States. At larger scales, 3-D models of stratigraphic units are intended to be the subsurface analog and extension of the surface geologic maps made within the Program. The Mapping Program is developing methods of storing, visualizing, and distributing 3-D models and subsurface data from multiple sources in easily shareable, queryable, non-proprietary format(s). We report on progress in 3-D mapping of the conterminous U.S. and on future prospects.

conterminous United States↗
USGS2025

Ordovician stratigraphy, structure, and karst of the Falling Spring Valley, Alleghany County, Virginia, USA

This one-day trip highlights new findings on a preliminary bedrock geologic map that shows results from ongoing geologic mapping in the Falling Spring Valley of Alleghany County, Virginia, USA, which is the southern end of the larger Warm Springs Valley, an elongated anticlinal valley rimmed by Ordovician and Silurian siliciclastic rocks, and which is famous for its thermal springs. This mapping includes stratigraphic, structural, and karst field and lab research focused on the Ordovician strata exposed in the area, the oldest of which is the dolomitic upper part of the Beekmantown Formation (Lower Ordovician, Darriwilian), and the youngest of which is the Juniata Formation (Upper Ordovician, Katian), a sequence of siliciclastic redbeds. Warm Springs Valley is the location of the only known caves in the eastern United States—three at present—with thermal waters flowing in some of their passages. Stops on the trip will highlight key details from mapping efforts, primarily within the structurally deformed Ordovician carbonate sequence that is exposed in the core and limbs of the anticline, as well as the associated karst features that are developed in those carbonate rocks, including results of recent dye traces and water temperature monitoring that have improved our understanding of the karst hydrogeologic systems developed in these strata.

Virginia↗
USGS2026

Small earthquake moment magnitude and implications for frequency–magnitude scaling of injection induced earthquakes of the Raton Basin

Accurate estimation of earthquake source parameters—such as moment magnitudes, corner frequencies, and stress drops—is essential for improving seismic hazard assessments and understanding earthquake physics. In this study, moment magnitudes ( M W ) are calculated for 31,581 earthquakes associated with wastewater injection in the Raton Basin (located along the border between northern New Mexico and southern Colorado) between 2016 and 2024 using radiative transfer theory to fit coda decay envelopes. Our results show that it is feasible to estimate moment magnitudes down to M W ~1 with coda envelopes from a small local monitoring network. Significant differences were found between M W and local magnitudes ( M L ) for small earthquakes ( M < 3.0). A linear relationship was optimized to convert M L to M W : M W = 0.7 M L + 0.96 and M W = 0.73 M L + 0.99 (for the events reported by the U.S. Geological Survey), which can be applied in future studies of Raton Basin seismicity. We find that b -values calculated employing different methods and using M L are approximately 1.0, while those using M W range from 1.2 to 1.4. A larger estimate of the b -value could influence interpretations of the statistical behavior of earthquakes associated with injection and consequently seismic hazard assessments based on a magnitude–frequency distribution. The potential differences between local versus moment magnitude-based earthquake statistics should be considered in other seismically active regions.

Colorado, New Mexico↗