USGS ScienceSearch

SEARCH · USGS Science

Results for “Arizona Geological Survey Contributed Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,128 records · Page 43Linked to original sources

A robust quantitative method to distinguish runoff-generated debris flows from floods

Debris flows and floods generated by rainfall runoff occur in rocky mountainous landscapes and burned steeplands. Flow type is commonly identified post-event through interpretation of depositional structures, but these may be poorly preserved or misinterpreted. Prior research indicates that discharge magnitude is commonly amplified in debris flows relative to floods due to volumetric bulking and increased frictional resistance. Here, we use this flow amplification to develop a metric ( Q* ) to separate debris flows from floods based on the ratio of observed peak discharge to the theoretical maximum water discharge from rainfall runoff. We compile 642 observations of floods and debris flows and demonstrate that Q* distinguishes flow type to ∼92% accuracy. Q* allows for accurate identification of debris flows through simple channel cross-section surveys rather than through qualitative interpretation of deposits, and therefore should increase the performance of models and engineered structures that require accurate flow-type observations.

Geophysical Research Letters

Archean to Mesozoic–Cenozoic seismic crustal structure: Implications for geological and biological evolution

We use >4500 measurements of crustal structure to investigate the seismic structure of continental crust, Archean to Mesozoic–Cenozoic. The mean crustal thickness of continents, including their margins, is 36.5 km. We find that Archean, Paleoproterozoic, and Mesoproterozoic crust have similar mean crustal thickness (41 km), seismic velocities, Vp/Vs ratio, and density. Crusts of these ages span 3 Ga, from 4.0 to 1.0 Ga, and their similarity of physical properties (thickness, density, and seismic velocities) suggests that the process of crustal formation may have been similar during this time period, which covers 66% of Earth's history. Neoproterozoic crustal properties differ significantly from Mesoproterozoic and older crusts. The mean thickness of Neoproterozoic crust is 32 km, some 9 km thinner than the mean thickness of Archean, Paleoproterozoic, and Mesoproterozoic crust. A lithospheric root with a thickness of 150–200 km underlies Archean, Paleoproterozoic, and Mesoproterozoic crusts, and this root resists lithospheric rifting and crustal extension and thinning. Based on these observations, particularly the lithospheric thickness, we conclude that Archean, Paleoproterozoic, and Mesoproterozoic lithosphere are unique and together form the stable cratonic nuclei, defined as the thick (150–250 km), long-lived cores of continents. Higher mantle temperatures during the Archean, Paleoproterozoic, and Mesoproterozoic may have played a key role in the formation of the thick lithospheric roots. The second key finding is that the similarities of mean seismic properties indicate that the process of crustal formation operating in the Archean continued during the Paleoproterozoic and Mesoproterozoic. The thin (mean value < 135 km) lithospheric root beneath Neoproterozoic and younger crust may be related to the steady decrease in mantle temperature through time. Neoproterozoic and Paleozoic crust have similar physical properties, and these eras are characterized by pronounced biodiversification, including the renowned Garden of Ediacara, the Cambrian Explosion, and the Great Ordovician Biodiversification. Mesozoic–Cenozoic crust is the most diverse and reflects the current tectonic and magmatic processes of crustal formation.

Book chapter

Generating geochemical and mineralogy distributions of soil in the conterminous United States using Bayesian hierarchical spatial models

Characterizing geochemical and mineralogical soil distributions across large spatial extents is essential for understanding mineral resources, ecosystem processes, and environmental risks. Rasters of soil geochemical distributions for the conterminous United States, however, are limited. We present a Bayesian modeling workflow and tool for generating predictive geochemical and mineralogy distribution maps for the conterminous United States using integrated nested Laplace approximation (INLA) with the stochastic partial differential equation approach. By modeling soil geostatistical data with environmental covariates (soil properties, topography, climate, and land cover), we generate predictive distributions of soil geochemistry that can be mapped or extracted for further analyses. As an example, we model the spatial distribution of trace elements in soil relevant to vertebrate health (cobalt, copper, iron, manganese, selenium, and zinc) and provide a workflow that can be used to generate and visualize predictive distributions of 39 other major and trace elements and 21 minerals of the soil survey, supporting a variety of ecological, environmental, and agricultural applications.

MethodsX

Mapping a Carrington storm

A map is presented of median 1-min-resolution peak geoelectric-field strength across the United States as would be induced by magnetic storms as intense as the 2 September 1859 Carrington storm. The map is constructed from two data sets: Magnetometer time series from 22 ground-based observatories recording 40 magnetic storms, and surface impedance tensors derived from magnetotelluric measurements acquired at 1616 survey sites across the contiguous United States. Carrington-class storm geoelectric fields are likely to be very strong in the United States East and Midwest; > 5.00 V/km at many places. In Virginia, strengths would likely range from 30.30 V/km, with a 68% confidence interval of [19.44,47.20] V/km, to as low as 0.05 [0.03,0.07] V/km. Comparison of model geopotentials with those measured on 30 long lines, indicates errors of about 18%. A Carrington-class storm would likely induce geoelectric fields with strengths 55% greater than for the 13–14 March 1989 storm.

contiguous United States

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas

Airborne radiometric data map alteration of porphyry copper systems in the Elkhorn district, MT

The Elkhorn district in southwestern Montana is known for past production of high-grade base and precious metals from skarn and carbonate replacement deposits. The district also hosts a porphyry Cu-Mo deposit. A radiometric survey flown over the district and surrounds provides maps of surficial concentrations of potassium, thorium, and uranium. Handheld gamma ray spectrometer measurements on altered and unaltered rocks in the district and surrounding region provide a means to ground truth the airborne data. We demonstrate that the airborne and ground-based measurements show similar map patterns. We calculate ratios of the radioelement concentrations and present a potassium enhancement map that combines potassium and ratios of potassium to thorium and uranium. The results highlight the rocks previously mapped as having K-feldspar-biotite and quartz-sericite alteration assemblages in the Elkhorn district and map additional hydrothermal systems in the region, including known alteration in the Radersburg district. The data enhancement techniques can be used as a screening tool for mapping additional porphyry copper systems.

Montana

40Ar/39Ar geochronology supporting mineral resources research at USGS Denver

The 40 Ar/ 39 Ar geochronology method is used to date potassium-bearing rocks and minerals, based on the decay of 40 K to 40 Ar, which provides important temporal constraints for geological events. The USGS Denver Argon Geochronology Laboratory dates samples from a variety of projects, mainly in the USGS Mineral Resource Program and the National Cooperative Geologic Mapping Program, facilitating in-depth research into the timing of geological events and processes. Recent applications of this method include geochronological studies in the Yellow Pine district, revealing mineralization ages that range from 51 to 70 Ma, and investigations into the Bear Lodge alkaline complex, providing insights into the timing of REE carbonatite formation. Additionally, studies at Alunite Ridge highlight the method's potential for understanding concealed mineral deposits. Ongoing projects continue to leverage 40 Ar/ 39 Ar data to enhance understanding of geologic frameworks and mineral resources, underpinning its importance in modern geochronology and mineral resource assessment.

Conference Paper

Statistical approaches for modeling correlated grade and tonnage distributions and applications for mineral resource assessments

Correlations between grade and tonnage exist in mineral resource data compiled from published reports, but they are not always addressed during quantitative assessment of undiscovered mineral resources. Failure to account for correlated grade and tonnage distributions can result in geologically unrealistic assessment results. Current software tools simulate univariate ore tonnage and multivariate resource grades of undiscovered deposits independently. As a result, analysts are forced to rely on ad-hoc solutions to minimize the correlation issues by: 1) creating subsets of data with restricted criteria; 2) truncating grade and tonnage distributions; and 3) testing model robustness using exploratory data analysis. While these methods represent pragmatic solutions, the statistical solutions presented here provide additional options to address real correlations in grade and tonnage data used for mineral resource assessments. We present a modified version of the MapMark4 package in R that introduces two alternatives for modeling grade and tonnage distributions, consisting of a multivariate solution that accounts for correlations between ore tonnage and metal grades and an empirical solution that utilizes simple random sampling with replacement to reproduce coupled grades and tonnages from the input data. We present simulations for contained ore and metal for three case studies representing tungsten skarn, komatiite-hosted nickel, and sediment-hosted carbonate amagmatic zinc-lead (Mississippi Valley-type) deposits. Employing the methods presented here yields quantitative mineral resource assessment results that more closely reflect the empirical distributions of grades and tonnages observed in nature and expands the applicability of these tools for ongoing critical mineral resource assessments.

Applied Computing and Geosciences

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research

The importance of nodal plane orientation diversity for earthquake focal mechanism stress inversions

Inversions of earthquake focal mechanisms are among the most accessible and reliable methods for determining crustal stress. However, the use of this method varies widely, and assumptions that underpin it are often violated, potentially compromising stress estimates. We investigate the consequences of violating the little-studied assumption that the focal mechanisms have diverse orientations. Our approach is to employ data-informed synthetic mechanisms, with nodal plane orientations defined by recent earthquake lineaments in the Midland Basin, western Texas, and rakes consistent with slip in the mapped stress field. Using both the traditional stress inversion method that assumes constant shear stress magnitudes on the causative faults as well as a recently published variable shear stress method, we show that low fault plane diversity can cause maximum horizontal stress ( S Hmax ) orientation and relative principal stress magnitude (faulting regime) estimates to differ markedly from the true values. This problem is compounded for catalogs with even modest amounts of noise (≤15°) or few (e.g., 20) mechanisms. Significantly, traditional approaches for quantifying uncertainty such as the bootstrap can severely underestimate the true uncertainty under these circumstances. To remedy this, we provide simple tools to quantify nodal plane orientation diversity and stress inversion reliability.

Geological Society of London Special Publications

Turbidite correlation for paleoseismology

Marine turbidite paleoseismology relies on the assumption of synchronous triggering of turbidity currents by earthquake shaking to infer rupture extent and recurrence. Such inference commonly depends on age dating and correlation of the physical stratigraphy of deposits carried by turbidity currents (i.e., turbidites) across great distances. Along the Cascadia subduction zone, which lies offshore the Pacific Northwest, USA, turbidite facies in core photographs, X-ray computed tomography images, and magnetic susceptibility (MS) data exhibit differences in character over relatively short distances, which implies that not all deposits can be correlated with confidence. Thus, subjective correlation based on expected similarity over great distances and weak age constraints does not independently support paleoseismic models. We present a new method for correlating turbidites along the Cascadia margin that can yield a more objective and repeatable stratigraphic framework to underpin earthquake recurrence. We use dynamic time warping to correlate MS logs and measure correlation coefficients of core pairs to evaluate correlation strength. We then compare these measures to a distribution of correlation coefficients of randomly generated turbidite sequences and find that only a small number of core pairs can be correlated more confidently than randomly stacked turbidites. This methodology promises a more robust correlation strategy for future stratigraphic studies.

Oregon, Washington

Identifying overlap between native fish movements and a possible seasonal Grass Carp deterrent in the Sandusky River, Ohio, USA

Riverine fishes are vulnerable to habitat fragmentation caused by interrupted access to vital habitats. Fragmentation using artificial structures can be used to limit the spread of invasive fishes by inhibiting movement between critical habitats. Thus, tradeoffs exist between maintaining connectivity for native species and restricting movement of invasive fishes. A nonphysical deterrent has been proposed to prevent invasive Grass Carp ( Ctenopharyngodon idella ) from reaching spawning habitats in the Sandusky River, a tributary to Lake Erie, during late spring–summer. However, this timing overlaps with spawning periods of a suite of native fishes. We used acoustic telemetry and ichthyoplankton surveys to examine movement and spawning activity of multiple native species and to assess potential impacts of deterrent operation on reproduction. All species used the proposed deterrent location during the Grass Carp spawning period, and their movements corresponded with larval fish collections, indicating upstream spawning. These findings suggest the deterrent could unintentionally restrict native species’ access to essential habitats. Balancing habitat connectivity and invasive species control will likely depend on species-specific responses and careful timing of deterrent operation.

Ohio

Computational electromagnetic geophysics for groundwater system studies: A review on established practices and recent advances

Identifying effective solutions for locating groundwater resources and ensuring the quality of drinking water is increasingly urgent, given the challenges posed by climate change and population growth. This review investigates electromagnetic geophysical imaging techniques, in both time- and frequency-domain, that can provide valuable insights for groundwater assessment. We explore computational electromagnetic methods used to evaluate electromagnetic data and several recent hydrogeophysical case studies. As open-source frameworks for modeling electromagnetic geophysical problems become available, a broader range of researchers can interpret their data with computationally advanced software. We provide an overview of documented open-source codes for evaluating electromagnetic data and analyze various hydrological targets in relation to their electromagnetic surveying technique and the computational method applied. Furthermore, we evaluate the potential of advanced computational techniques, including three-dimensional modeling, non-deterministic inversion and machine learning, to couple geophysical with numerical groundwater modeling and apply it in groundwater system studies. Despite obstacles such as complexity and resource demands, our findings indicate that the quantification and integration of predictive uncertainties from both electromagnetic and hydrological data and simulations would significantly improve the reliability of hydrogeophysical models. This can lead to a deeper understanding of groundwater systems and improved management practices.

Journal of Hydrology

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado