USGS Science⌕ Search

SEARCH · USGS Science

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS2005

Estimating water‐table altitudes for regional ground‐water flow modeling, U.S. Gulf Coast

Water‐table altitude, a controlling factor for ground‐ water flow , was estimated from detailed topographic data by subtracting the estimated depth‐to‐water. Land‐surface altitude of the Coastal Plain in the south‐ central United States varies from 0 to more than 800 feet above sea level. Predevelopment depth‐to‐water in 6,825 wells less than 150 feet deep averages 25.7 feet (standard deviation, 19.5 feet). Most water‐table‐altitude variation is due to variation in land‐surface altitude and not due to variation in depth‐to‐ water. Digital topographic data, from 1:250,000 scale maps for every 30 seconds of latitude and longitude are available for the continental United States. About 90 altitudes were averaged for each 25‐square‐mile block of a rectangular grid used for ground‐water flow modeling. Multiple linear regressions of predevelopment water‐level data and topographic data were used to derive empirical equations relating water‐table altitude to topography. The regression method was more consistent, efficient, and accurate than manually digitizing values from manually contoured water‐table maps. Water‐table maps usually are prepared from few data that are concentrated in topographically flat areas. Manually digitizing water‐table maps on a regional scale introduces additional error. About 35 percent of the water‐table altitudes obtained manually were greater than average land‐surface altitudes from topographic data. The mean difference between water‐table altitudes from the two methods was less than 10 feet, which indicates no systematic error was incorporated in the regression method. Copyright © 1989, Wiley Blackwell. All rights reserved

Gulf of Mexico coast↗
USGS2002

Color-coded contour map of Mars M 25M RKN

NOTES ON BASE This map is based on data from the Mars Orbiter Laser Altimeter (MOLA) (Smith and others, 2001), an instrument on NASA's Mars Global Surveyor (MGS) spacecraft (Albee and others, 2001). The image used for the base of this map represents more than 600 million measurements gathered between 1999 and 2001, adjusted for consistency (Neumann and others, 2001, 2002) and converted to planetary radii. These have been converted to elevations above the areoid as determined from a martian gravity field solution GMM2 (Lemoine and others, 2001), truncated to degree and order 50, and oriented according to current standards (see below). The average accuracy of each point is originally ~100 meters in horizontal position, and ~1 meter in radius (Neumann, 2001). However, the total elevation uncertainty is at least +3 m due to the global error in the areoid (+1.8 meters according to Lemoine and others, 2001) and regional uncertainties in its shape (communication from Neumann, 2002). The measurements were converted into a digital elevation model (DEM) (communication from Neumann, 2002; Neumann and others, 2001; Smith and others, 2001) using Generic Mapping Tools software (Wessel and Smith, 1998), with a resolution of 0.015625 degrees per pixel or 64 pixels per degree. In projection, the pixels are 926.17 meters in size at the equator. PROJECTION The Mercator projection is used between latitudes +57°, with a central meridian at 0° and latitude equal to the nominal scale at 0°. The Polar Stereographic projection is used for the polar regions north of the +55° parallel and south of the –55° parallel with a central meridian set for both at 0°. The adopted equatorial radius is 3,396.19 km (Duxbury and others 2002; Seidelmann and others 2002). COORDINATE SYSTEM The MOLA data were initially referenced to an internally consistent inertial coordinate system, derived from tracking of the MGS spacecraft. By adopting appropriate values for the orientation of Mars as defined by the International Astronomical Union (IAU) and the International Association of Geodesy (IAG) (Seidelmann and others, 2002), these inertial coordinates were converted into the planet-fixed coordinates (longitude and latitude) used on this map. These values include the orientation of the north pole of Mars (including the effects of precession), the rotation rate of Mars, and a value for W0 of 176.630°, where W0 is the angle along the equator to the east, between the 0° meridian and the equator's intersection with the celestial equator at the standard epoch J2000.0 (Seidelmann and others, 2002). This value of W0 was chosen (Duxbury and others, 2002) in order to place the 0° meridian through the center of the small (~500 m) crater Airy-0, located in the crater Airy (de Vaucouleurs and others, 1973; Seidelmann and others, 2002). Longitude increases to the east, and latitude is planetocentric as allowed by IAU/IAG standards (Seidelmann and others, 2002) and in accordance with current NASA and USGS standards (Duxbury and others, 2002). A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards (Seidelmann and others, 2002) and has also been used for Mars. The figure adopted to compute this secondary grid is an oblate spheroid with an equatorial radius of 3,396.19 km and a polar radius of 3,376.2 km (Duxbury and others, 2002; Seidelmann and others, 2002). MAPPING TECHNIQUES To create the topographic base image, the original DEM produced by the MOLA team in Simple Cylindrical projection with a resolution of 64 pixels per degree was projected into the Mercator and Polar Stereographic pieces. A shaded relief was generated from each DEM with a sun angle of 30° from horizontal and a sun azimuth of 270°, as measured clockwise from north, and a vertical exaggeration of 100%. Illumination is from the west, which follows a long-standing USGS tradition for planetary maps. This allows for continuity in the shading between maps and quadrangles, and most closely resembles lighting conditions found on imagery. The DEM values were then mapped to a smooth global color look-up table. Note that the chosen color scheme simply represents elevation changes and is not intended to imply anything about surface characteristics (e.g., past or current presence of water or ice). These two files were then merged and scaled to 1:25 million for the Mercator portion and 1:15,196,708 for the two Polar Stereographic portions, with a resolution of 300 dots per inch. The projections have a common scale of 1:13,923,113 at +56° latitude. Contours were created from the DEM at a 1-kilometer interval. Contours for features with a diameter of 3 km or less (features too small for this map scale) were removed. The contours were then simplified by removing points along the contours spaced less than 1 km apart. NOMENCLATURE Names on this sheet are approved by the IAU and have been applied for features clearly visible at the scale of this map. For a complete list of the IAU-approved nomenclature for Mars, see the Gazetteer of Planetary Nomenclature at http://planetarynames.wr.usgs.gov/. Font color was chosen for readability. Names followed by an asterisk are provisionally approved. M 25M RKN: Abbreviation for Mars, 1:25,000,000 series, shaded relief (R), with color (K) and nomenclature (N) (Greeley and Batson, 1990).

Open-File Report↗
USGS2020

Systems-deposits-commodities-critical minerals table for the earth mapping resources initiative

To define and prioritize focus areas across the United States with resource potential for 35 critical minerals in a few years’ time, the U.S Geological Survey Earth Mapping Resources Initiative (Earth MRI) required an efficient approach to streamline workflow. A mineral systems approach based on current understanding of how ore deposits that contain critical minerals form and relate to broader geologic frameworks and the tectonic history of the Earth was used to satisfy this Earth MRI need. This report describes the rationale for, and structure of, a table developed for Earth MRI that relates critical minerals and principal commodities to the deposit types and mineral systems in which they are concentrated. The hierarchical relationship between systems, deposits, commodities, and critical minerals makes it possible to define and prioritize each system-based focus area once for all of the critical minerals that it may contain. This approach is advantageous because mineral systems are much larger than individual ore deposits and they generally have geologic features that can be “imaged” by the topographic, geologic, geochemical, and geophysical mapping techniques deployed by Earth MRI.

Open-File Report↗
USGS1905

The Fairhaven gold placers, Seward Peninsula, Alaska

This manuscript is based on a geologic and topographic reconnaissance survey, made during the summer of 1903, of an important placer-gold district in the northeastern part of Seward Peninsula. The report is accompanied by a reconnaissance map by Mr. D. C. Witherspoon, topographer, under whose directions the field operations were carried out. Surveys were begun in Seward Peninsula in 1899, soon after the discovery of the rich placers of Nome, and, in view of the great economic importance of the field, have been extended as rapidly as the appropriations permitted. It was early recognized that here, as elsewhere in Alaska, it would be better to obtain general topographic and geologic results, to be immediately available to the mining public, than to attempt exhaustive surveys and studies of small areas. This has been the guiding policy in formulating and executing the plans. As a result, there have been issued a number of publications (including reconnaissance maps) which, though only of a preliminary character, have been, because of their timeliness, of much value to the mining public. With the appearance of the following report this first epoch in the surveys will have closed, for there will be available complete reconnaissance reports and maps of the entire Seward Peninsula. These general reports and maps should be followed by more detailed surveys; these have been begun, and it is purposed to carry them forward as rapidly as circumstances will permit. In taking up areas for detailed investigations the attempt will be made to study first those of greatest economic interest.

Alaska↗
USGS2006

Preliminary Assessment of Landslides Along the Florida River Downstream from Lemon Reservoir, La Plata County, Colorado

Nearly two-dozen shallow landslides were active during spring 2005 on a hillside located along the east side of the Florida River about one kilometer downstream from Lemon Reservoir in La Plata County, southwestern Colorado. Landslides on the hillside directly threaten human safety, residential structures, a county roadway, utilities, and the Florida River, and indirectly threaten downstream areas and Lemon Dam. Most of the area where the landslides occurred was burned during the 2002 Missionary Ridge wildfire. We performed geologic mapping, subsurface exploration and sampling, radiocarbon dating, and shallow ground-water and ground-displacement monitoring to assess landslide activity. Active landslides during spring 2005 were as large as 35,000 m3 and confined to colluvium. Debris flows were mobilized from most of the landslides, were as large as 1,500 m3, and traveled as far as 250 m. Landslide activity was triggered by elevated ground-water pressures within the colluvium caused by infiltration of snowmelt. Landslide activity ceased as ground-water pressures dropped during the summer. Shallow landslides on the hillside appear to be much more likely following the Missionary Ridge fire because of the loss of tree root strength and evapotranspiration. We used monitoring data and observations to develop preliminary, approximate rainfall/snowmelt thresholds above which shallow landslide activity can be expected. Landslides triggered during spring 2005 occurred within a 1.97 x 107 m3 older landslide that extends, on average, about 40 m into bedrock. The south end of this older landslide appears to have experienced deep secondary landsliding. Radiocarbon dating of sediments at the head of the older landslide suggests that the landslide was active about 1,424-1,696 years ago. A relatively widespread wildfire may have preceded the older landslide, and the landslide may have occurred during a wetter time. The wetter climate and effects of the wildfire would likely have resulted in increased ground-water pressures, which may have triggered the older landslide. This landslide appears to have crossed the valley floor and been subsequently eroded from this area. We found no evidence that landslide debris across the valley floor formed an impoundment of the Florida River, although it is very likely. Erosion of buttressing landslide debris from the valley floor and the lower strength of the landslide basal shear zone relative to pre-slide strength created less stable conditions than were present prior to occurrence of the landslide. However, deep ground-water conditions largely control the stability of the slope and are unknown here; hence, the potential for future deep landsliding is unknown. Additional investigation could be undertaken to further characterize landslide hazards in the area. This investigation could include episodic surveying of monuments we installed across the older landslide, obtaining detailed topographic data and aerial photography, mapping landslide debris and lacustrine deposits related to the potential former landslide dam, mapping secondary landslides, obtaining additional ages of landslide activity, constructing deep boreholes and ground-water monitoring wells, laboratory testing of soil and rock strength and hydraulic properties, and ground-water and slope-stability modeling.

Open-File Report↗
USGS2013

Geologic map of southwestern Sequoia National Park, Tulare County, California

This map shows the geology of 675 km 2 (260 mi 2 ) on the west slope of the Sierra Nevada, California, mainly in Sequoia National Park and Sequoia National Forest. It was produced by the U.S. Geological Survey (USGS) at the request of the National Park Service to complete the geologic map coverage of Kings Canyon and Sequoia National Parks. The area includes the Mineral King 15’ topographic quadrangle (sheet 1) and strips along the east and northeast edges of the Kaweah 15’ topographic quadrangle (sheet 2), both in Tulare County. Mapping was performed mainly on the 1:24,000-scale Mineral King, Silver City, Quinn Peak, Moses Mountain, Case Mountain, and Dennison Peak 7.5’ topographic quadrangle bases. Rocks within the study area are chiefly Cretaceous granites and granodiorites of the Sierra Nevada batholith that intruded coherent masses of Mesozoic metasedimentary and metavolcanic rocks. Quaternary till and talus are the principal surficial deposits, with the exception of a large bouldery alluvial apron near the southwest corner of the map area. The study area includes the headwaters of the Kaweah River (East and South Forks), Tule River (North Fork and North Fork of the Middle Fork), and the Little Kern River. Relief is considerable, with elevations spanning from 1,500 feet along the Middle Fork Kaweah River to 12,432 feet at the summit of Florence Peak along the crest of the Great Western Divide.

California↗
USGS2001

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗
USGS2014

Evaluation of a model framework to estimate soil and soil organic carbon redistribution by water and tillage using 137 Cs in two U.S. Midwest agricultural fields

Cultivated lands in the U.S. Midwest have been affected by soil erosion, causing soil organic carbon (SOC) redistribution in the landscape and other environmental and agricultural problems. The importance of SOC redistribution on soil productivity and crop yield, however, is still uncertain. In this study, we used a model framework, which includes the Unit Stream Power-based Erosion Deposition (USPED) and the Tillage Erosion Prediction (TEP) models, to understand the soil and SOC redistribution caused by water and tillage erosion in two agricultural fields in the U.S. Midwest. This model framework was evaluated for different digital elevation model (DEM) spatial resolutions (10-m, 24-m, 30-m, and 56-m) and topographic exponents ( m = 1.0–1.6 and n = 1.0–1.3) using soil redistribution rates from 137 Cs measurements. The results showed that the aggregated 24-m DEM, m = 1.4 and n = 1.0 for rill erosion, and m = 1.0 and n = 1.0 for sheet erosion, provided the best fit with the observation data at both sites. Moreover, estimated average SOC redistributions were 1.3 ± 9.8 g C m − 2 yr − 1 in field site 1 and 3.6 ± 14.3 g C m − 2 yr − 1 in field site 2. Spatial distribution patterns showed SOC loss (negative values) in the eroded areas and SOC gain (positive value) in the deposition areas. This study demonstrated the importance of the spatial resolution and the topographic exponents to estimate and map soil redistribution and the SOC dynamics throughout the landscape, helping to identify places where erosion and deposition from water and tillage are occurring at high rates. Additional research is needed to improve the application of the model framework for use in local and regional studies where rainfall erosivity and cover management factors vary. Therefore, using this model framework can help to improve the information about the spatial distribution of soil erosion across agricultural landscapes and to gain a better understanding of SOC dynamics within eroding and previously eroded fields.

Iowa↗
USGS1999

Seafloor environments in the Long Island Sound estuarine system

Four categories of modern seafloor sedimentary environments have been identified and mapped across the large, glaciated, topographically complex Long Island Sound estuary by means of an extensive regional set of sidescan sonographs, bottom samples, and video-camera observations and supplemental marine-geologic and modeled physical-oceanographic data. (1) Environments of erosion or nondeposition contain sediments which range from boulder fields to gravelly coarse-to-medium sands and appear on the sonographs either as patterns with isolated reflections (caused by outcrops of glacial drift and bedrock) or as patterns of strong backscatter (caused by coarse lag deposits). Areas of erosion or nondeposition were found across the rugged seafloor at the eastern entrance of the Sound and atop bathymetric highs and within constricted depressions in other parts of the basin. (2) Environments of bedload transport contain mostly coarse-to-fine sand with only small amounts of mud and are depicted by sonograph patterns of sand ribbons and sand waves. Areas of bedload transport were found primarily in the eastern Sound where bottom currents have sculptured the surface of a Holocene marine delta and are moving these sediments toward the WSW into the estuary. (3) Environments of sediment sorting and reworking comprise variable amounts of fine sand and mud and are characterized either by patterns of moderate backscatter or by patterns with patches of moderate-to-weak backscatter that reflect a combination of erosion and deposition. Areas of sediment sorting and reworking were found around the periphery of the zone of bedload transport in the eastern Sound and along the southern nearshore margin. They also are located atop low knolls, on the flanks of shoal complexes, and within segments of the axial depression in the western Sound. (4) Environments of deposition are blanketed by muds and muddy fine sands that produce patterns of uniformly weak backscatter. Depositional areas occupy broad areas of the basin floor in the western part of the Sound. The regional distribution of seafloor environments reflects fundamental differences in marine-geologic conditions between the eastern and western parts of the Sound. In the funnel-shaped eastern part, a gradient of strong tidal currents coupled with the net nontidal (estuarine) bottom drift produce a westward progression of environments ranging from erosion or nondeposition at the narrow entrance to the Sound, through an extensive area of bedload transport, to a peripheral zone of sediment sorting. In the generally broader western part of the Sound, a weak tidal-current regime combined with the production of particle aggregates by biologic or chemical processes, cause large areas of deposition that are locally interrupted by a patchy distribution of various other environments where the bottom currents are enhanced by and interact with the seafloor topography.

Marine Geology↗
USGS2019

The Earth Mapping Resources Initiative (Earth MRI): Mapping the Nation’s critical mineral resources

The Earth Mapping Resources Initiative (Earth MRI; formerly known as 3DEEP) is planned as a partnership between the U.S. Geological Survey (USGS), the Association of American State Geologists (AASG), and other Federal, State, and private-sector organizations. The goal of the effort is to improve our knowledge of the geologic framework in the United States and to identify areas that have the potential to contain undiscovered critical mineral resources. Enhancement of our domestic mineral supply will decrease our reliance on foreign sources of minerals that are fundamental to the Nation’s security and economy. The intent of Earth MRI is to leverage the USGS’s existing relationships with States and the private sector to conduct state-of-the-art geologic mapping and airborne geophysical and topographic (lidar) surveys. Analyses of these datasets could point to potential buried critical mineral deposits.

Fact Sheet↗
USGS2020

Technical overview of the U.S. Geological Survey Earth Mapping Resources Initiative (Earth MRI)

The Earth Mapping Resources Initiative (Earth MRI) was developed by the U.S. Geological Survey in response to a Federal directive calling on various Federal agencies to address potential vulnerabilities in the Nation’s supply of critical mineral resources. The primary purpose of this initiative is to identify potentially mineralized areas containing critical minerals by gathering new basic geologic data about the United States and its territories and to make these data publicly available through the Earth MRI web portal ( https://usgs.gov/earthmri ). The gathering of data is accomplished through geophysical surveys, geologic mapping, and the collection of topographical (light detection and ranging, or lidar) data. In addition to identifying areas permissive for hosting critical minerals, the new data collected are likely to be helpful in addressing other societal needs as well, such as by helping to locate groundwater resources, providing information needed to mitigate effects of natural hazards, and identifying locations of the mineral resources useful for restoring and rebuilding aging infrastructure in the United States.

Fact Sheet↗
USGS2022

Landsat Collection 2 Level-3 Fractional Snow Covered Area science product

The Landsat Collection 2 Level-3 Fractional Snow Covered Area science product indicates the percentage of pixels covered by snow for Landsat 4–9 imagery. Landsat’s spatial resolution offers the capability to map snow cover patterns across topographically complex mountainous regions. Snow cover is spatially and temporally variable and is often concentrated in remote or inaccessible land regions, making spaceborne remote sensing the most feasible approach to measure and monitor snow cover change.

Fact Sheet↗
USGS2014

Preliminary interpretation of pre-2014 landslide deposits in the vicinity of Oso, Washington

High-resolution topographic surveys allow fairly precise mapping of landslide deposits and their relative ages. Relative ages are determined by cross-cutting relations and the amount of smoothing—more smoothed slide deposits are older—of these deposits. The Tulalip Tribes, in partnership with the Puget Sound Lidar Consortium, acquired a high-resolution lidar (light detection and ranging) survey of the North Fork Stillaguamish River valley in 2013. This report presents a preliminary interpretation of the topography of this area using the lidar data at a scale of 1:24,000.

Washington↗
USGS1916

Guidebook of the western United States: Part C - The Santa Fe route, with a side trip to Grand Canyon of the Colorado

The United States of America comprise an area so vast in extent and so diverse in natural features as well as in characters due to human agency that the American citizen who knows thoroughly his own country must have traveled widely and observed wisely. To 'know America first' is a patriotic obligation, but to meet this obligation the railroad traveler needs to have his eyes directed toward the more important or essential things within his field of vision and then to have much that he sees explained by what is unseen in the swift passage of the train. Indeed, many things that attract his attention are inexplicable except as the story of the past is available to enable him to interpret the present. Herein lie the value and the charm of history, whether human or geologic. The present stimulus given to travel in the home country will encourage many thousands of Americans to study geography at first hand. To make this study most profitable the traveler needs a handbook that will answer the questions that come to his mind so readily along the way. Furthermore, the aim of such a guide should be to stimulate the eye in the selection of the essentials in the scene that so rapidly unfolds itself in the crossing of the continent. In recognition of the opportunity afforded in 1915 to render service of this kind to an unusually large number of American citizens, as well as to visitors from other countries, the United States Geological Survey has prepared a series of guidebooks covering four of the older railroad routes west of the Mississippi. These books are educational in purpose, but the method adopted is to entertain the traveler by making more interesting what he sees from the car window. The plan of the series is to present authoritative information that may enable the reader to realize adequately the scenic and material resources of the region he is traversing, to comprehend correctly the basis of its development, and above all to appreciate keenly the real value of the country he looks out upon, not as so many square miles of territory represented on the map in a railroad folder by meaningless spaces, but rather as land - real estate, if you please - varying widely in present appearance because differing largely in its history and characterized by even greater variation in values because possessing diversified natural resources. One region may be such as to afford a livelihood for only a pastoral people; another may present opportunity for intensive agriculture; still another may contain hidden stores of mineral wealth that may attract large industrial development; and taken together these varied resources afford the promise of long-continued prosperity for this or that State. Items of interest in civic development or references to significant epochs in the record of discovery and settlement may be interspersed with explanations of mountain and valley or statements of geologic history. In a broad way, the story of the West is a unit, and every chapter should be told in order to meet fully the needs of the tourist who aims to understand all that he sees. To such a traveler-reader this series of guidebooks is addressed. To this interpretation of our own country the United States Geological Survey brings the accumulated data of decades of pioneering investigation, and the present contribution is only one type of return to the public which has supported this scientific work under the Federal Government. In preparing the description of the country traversed by the Santa Fe Route the geographic and geologic information already published as well as unpublished material in the possession of the Geological Survey has been utilized, but to supplement this material Mr. Darton made a field examination of the entire route in 1914. Information has been furnished by Erasmus Haworth, J. E. Todd, and R. T. Hill, as well as by others whose writings are listed in the bibliography at the end of the text. Cooperation has been rendered by the United States Reclamation Service and by bureaus of the Department of Agriculture. Railroad officials and other citizens have also generously given their aid, and other members of the Survey have freely cooperated in the work. For the purpose of furnishing the traveler with a graphic presentation of each part of his route, the accompanying maps, 25 sheets in all, have been prepared, with a degree of accuracy probably never bsfore attained in a guidebook, aiid their arrangement has been planned to meet the convenience of the reader. The special topographic surveys necessary to complete these maps of the route were made by W. O. Tufts.

Bulletin↗
USGS2026

Impacts of transient critical zone evolution on landslide susceptibility and hazard Across the Utuado batholith, Puerto Rico

Landscapes in humid climates often experience rapid chemical and mechanical weathering that can change groundwater fluxes, drainage pathways, and frictional strength via alterations in subsurface mineral composition and matrix porosity. These changes to hillslope critical zone structure and strength should control landslide susceptibility, size, and failure style. Here we test the impact of differential weathering on landslide failure processes by exploiting a natural experiment along the dioritic Utuado batholith in Puerto Rico's Cordillera Central, where a sharp weathering gradient follows an upstream-propagating knickzone into an uplifted shoreline platform that was affected by Hurricane Maria in 2017. Through a combination of landslide mapping, field geophysical and geotechnical surveys, topographic analysis, calibrated stream profile inversion, 3D back-analysis of hillslope strength, and debris-flow inundation assessments, we show that differential weathering induces changes to critical zone structure and consequently landslide susceptibility and hazard. Our mapping reveals that the hurricane-induced landslides preferentially cluster along less weathered hillslopes despite a marked increase in frictional strength. Jointly inverted seismic refraction and electrical resistivity profiles show that the frictionally weak, heavily weathered hillslopes are highly porous and dry, which we posit acts to stabilize slopes through limiting deeper hydrologic connectivity that can produce shallow water tables with destabilizing lateral seepage forces during storms. Debris-flow inundation mapping and analysis reveals that major contributors to debris-flow growth, channel steepness and landslide coalescence, scale linearly with hillslope friction angle. This leads to higher-mobility debris flows along knickzone reaches, which disproportionately affects communities at the base of the plateau.

Puerto Rico↗
USGS2001

Geologic map and digital database of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses part of the northern Eagle Mountains and part of the south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults in the Eagle Mountains and an east-west trending system of high-angle dip- and left-slip faults. In and adjacent to the Conejo Well quadrangle, faults of the northwest-trending set displace Miocene sedimentary rocks and basalt deposited on the Tertiary erosion surface and Pliocene and (or) Pleistocene deposits that accumulated on the oldest pediment. Faults of this system appear to be overlain by Pleistocene deposits that accumulated on younger pediments. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Conejo Well database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a point coverage containing line ornamentation, and (5) a scanned topographic base at a scale of 1:24,000. The coverages include attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗
USGS2015

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in Quadrangle 6 of the Stellwagen Bank National Marine Sanctuary Region offshore of Boston, Massachusetts

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration's National Marine Sanctuary Program, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area is approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. Seven maps, at a scale of 1:25,000, of quadrangle 6 (211 km 2 ) depict seabed topography, backscatter, ruggedness, geology, substrate mobility, mud content, and areas dominated by fine-grained or coarse-grained sand. Interpretations of bathymetric and seabed backscatter imagery, photographs, video, and grain-size analyses were used to create the geology-based maps. In all, data from 420 stations were analyzed, including sediment samples from 325 locations. The seabed geology map shows the distribution of 10 substrate types ranging from boulder ridges to immobile, muddy sand to mobile, rippled sand. Mapped substrate types are defined on the basis of sediment grain-size composition, surface morphology, sediment layering, the mobility or immobility of substrate surfaces, and water depth range. This map series is intended to portray the major geological elements (substrates, topographic features, processes) of environments within quadrangle 6. Additionally, these maps will be the basis for the study of the ecological requirements of invertebrate and vertebrate species that utilize these substrates and guide seabed management in the region.

Massachusetts↗