SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources

USGS2011

Demonstration/validation of the Snap sampler passive groundwater sampling device

Laboratory studies and a field demonstration were conducted to determine the ability of the Snap Sampler to recover representative concentrations of several types of inorganic analytes from ground water. Analytes included non-metals, transition metals, alkaline earth metals, alkali metals, and a metalloid. In the laboratory studies, concentrations of analytes in Snap Sampler samples were com-parable with concentrations of the analytes in samples collected from a standpipe (i.e., control samples). For the field demonstration, there were sampling events at the former Pease Air Force Base. Samples taken using a Snap Sampler were compared with samples collected using conventional low-flow purging and sampling and a regenerated cellulose passive diffusion sampler. Based upon statistical analyses, analyte concentrations were found to be equivalent to those in the low-flow samples with one exception – unfiltered iron, where concentrations were significantly higher in the Snap Sampler samples. Differences were most pronounced in samples collected from the two stainless steel wells and from wells with higher turbidity levels. Elevated turbidities may have resulted from installing additional sampling equipment (including the baffle, pump, samplers, and bottom weight) in the well before sampling. We will examine this issue further at our next test site.

New Hampshire↗

USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗

USGS1969

Loss of uranium from crystallized silicic volcanic rocks

Dense primarily crystallized silicic groundmass material from two welded ash-flow units and one lava flow of Tertiary age from the Western United States contain only 20 to 60 percent of the uranium present in nonhydrated glass from the rock units. These differences reflect loss of uranium from the crystallized specimens, probably as a result of groundwater leaching. It appears likely that most crystallized silicic volcanic rocks have lost comparable amounts of uranium.

Earth and Planetary Science Letters↗

USGS2021

Magnetotelluric sampling and geoelectric hazard estimation: Are national-scale surveys sufficient?

At present, the most reliable information for inferring storm-time ground electric fields along electrical transmission lines comes from coarsely sampled, national-scale magnetotelluric (MT) data sets, such as that provided by the EarthScope USArray program. An underlying assumption in the use of such data is that they adequately sample the spatial heterogeneity of the surface relationship between geomagnetic and geoelectric fields. Here, we assess the degree to which the density of MT data sampling affects geoelectric hazard assessments. For electrical transmission networks in each of four focus regions across the contiguous United States, we perform two parallel band-limited (10 1 –10 3 s) hazard analyses: one using only USArray-style (∼70-km station spacing) MT data, and one incorporating denser (≪70-km station spacing) MT data. We find that the use of USArray-style MT sampling alone provides a useful first-order estimate of integrated geoelectric fields along electrical transmission lines. However, we also find that the use of higher density MT data can in some areas lead to order-of-magnitude differences in line-averaged electric field estimates at the level of individual transmission lines and can also yield significant differences in subregional hazard patterns. As we demonstrate using variogram plots, these differences reflect short-spatial-scale variability in Earth conductivity, which in turn reflects regional lithotectonic structure and history. We also provide a cautionary example in the use of electrical conductivity models to predict dense MT data; although valuable for hazard applications, models may only be able to reproduce surface geoelectric fields as captured by the MT data from which they were derived.

AGU Space Weather↗

USGS2026

Ecological transformations of coastal wetlands of the conterminous United States in response to contemporaneous sea-level rise

Coastal wetlands are among the most important ecosystems on the planet but are increasingly imperiled by accelerating sea-level rise (SLR). In the past, biogeomorphic feedbacks have allowed coastal wetlands to adjust vertically and persist through periods of accelerated SLR. Recent rates of SLR are faster than any in recent geologic history, making the fate of coastal wetlands highly uncertain. Here, we synthesize surface elevation table marker-horizon data from 442 stations in coastal wetlands across the conterminous United States to evaluate if they are largely persisting in the face of accelerated SLR, or if they are undergoing ecological transformations of submergence and/or migration. Across the conterminous United States, 11% of coastal wetlands in this sample are on a trajectory of submergence whereas 73% of sites are lagging SLR, but may be able to migrate upslope, and 16% of sites are gaining elevation at rates which exceed SLR indicating persistence and an ability to migrate seaward. Vulnerability of these systems to ecological transformation varies across the three coasts of the conterminous United States which, span large biogeomorphic gradients. These results serve as one of the first national syntheses of coastal wetland elevation trends and may help focus conservation and restoration efforts in a rapidly changing future.

conterminous United States↗

USGS2011

Monitoring landscape change for LANDFIRE using multi-temporal satellite imagery and ancillary data

LANDFIRE is a large interagency project designed to provide nationwide spatial data for fire management applications. As part of the effort, many 2000 vintage Landsat Thematic Mapper and Enhanced Thematic Mapper plus data sets were used in conjunction with a large volume of field information to generate detailed vegetation type and structure data sets for the entire United States. In order to keep these data sets current and relevant to resource managers, there was strong need to develop an approach for updating these products. We are using three different approaches for these purposes. These include: 1) updating using Landsat-derived historic and current fire burn information derived from the Monitoring Trends in Burn Severity project; 2) incorporating vegetation disturbance information derived from time series Landsat data analysis using the Vegetation Change Tracker; and 3) developing data products that capture subtle intra-state disturbance such as those related to insects and disease using either Landsat or the Moderate Resolution Imaging Spectroradiometer (MODIS). While no one single approach provides all of the land cover change and update information required, we believe that a combination of all three captures most of the disturbance conditions taking place that have relevance to the fire community.

IEEE Journal of Selected Topics in Applied Earth O↗

USGS2022

Tectonics, fault zones, and topography in the Alaska-Canada Cordillera with a focus on the Alaska Range and Denali fault zone

Synergistic interactions between geologic structures and topography have long been recognized to reflect numerous Earth processes and rock properties over time. It was not until the advent of plate tectonics in the midtwentieth century that researchers began to view the nature of the northern Cordillera orogen as a quilt of foreign pieces of crust or “suspect terranes”. The Alaska Range shows complexity in topographic, geometric, and exhumational age asymmetry along and across the strike of the Denali fault zone attributable to several factors. Although direct exposures of the Denali fault zone in bedrock are exceptionally rare, regional to outcrop scale observations show the common internal structure consisting of some degree of strain localization in one or more, and presumably relatively weak, fault cores and an associated, commonly hydrothermally altered, damage zone.

Alaska↗

USGS2017

Tellurium

Tellurium (Te) is a very rare element that averages only 3 parts per billion in Earth’s upper crust. It shows a close association with gold and may be present in orebodies of most gold deposit types at levels of tens to hundreds of parts per million. In large-tonnage mineral deposits, such as porphyry copper and seafloor volcanogenic massive sulfide deposits, sulfide minerals may contain hundreds of parts per million tellurium, although the orebodies likely have overall concentrations of 0.1 to 1.0 parts per million tellurium. Tellurium is presently recovered as a primary ore from only two districts in the world; these are the gold-tellurium epithermal vein deposits located adjacent to one another at Dashuigou and Majiagou (Sichuan Province) in southwestern China, and the epithermal-like mineralization at the Kankberg deposit in the Skellefteå VMS district of Västerbotten County, Sweden. Combined, these two groups of deposits account for about 15 percent (about 70 metric tons) of the annual global production of between 450 and 470 metric tons of tellurium. Most of the world’s tellurium, however, is produced as a byproduct of the mining of porphyry copper deposits. These deposits typically yield concentrations of 1 to 4 percent tellurium in the anode slimes recovered during copper refining. Present production of tellurium from the United States is solely from the anode slimes at ASARCO LLC’s copper refinery in Amarillo, Texas, and may total about 50 metric tons per year. The main uses of tellurium are in photovoltaic solar cells and as an additive to copper, lead, and steel alloys in various types of machinery. The environmental data available regarding the mining of tellurium are limited; most concerns to date have focused on the more-abundant metals present in the large-tonnage deposits from which tellurium is recovered as a byproduct. Global reserves of tellurium are estimated to be 24,000 metric tons, based on the amount of tellurium likely contained in global copper reserves and on a 50 percent recovery rate from refinery anode slimes during the commonly used electrolytic process, also known as solvent extraction-electrolytic refining. If the more economical solvent-leach process—a process that does not recover tellurium—is increasingly used in the future to recover lower grades of copper from porphyry and other large-tonnage deposits, then additional high-grade tellurium-rich gold deposits may become new primary sources for tellurium, particularly epithermal vein deposits associated with alkaline magmatism.

Professional Paper↗

USGS1973

Accessory apatite from hybrid granitoid rocks of the southern Snake Range, Nevada

Analytical data, optical properties, and unit-cell parameters are presented for 24 samples of accessory apatites recovered from hybrid granitoid rocks of the southern Snake Range, Nev. A complete chemical analysis is given for one. In the Snake Creek-Williams Canyon outcrop area, where the hybrid rocks grade from granodiorite with 63 percent SiO 2 to a quartz monzonite with 76 percent SiO 2 within a horizontal distance of about 3 miles, abundance and crystal habit of the apatite change with rock chemistry. The apatite probably is slightly more than 90 mole percent fluorapatite in the most felsic rocks, slightly less in the most mafic. The range of F->OH substitution in apatite from this outcrop area is much smaller than in the coexisting biotites. Except for manganese, strontium, sodium, and the rare earths, there is very limited substitution for calcium in the crystal structure of these apatites. Apatites from the more mafic rocks tend to contain a lighter, more basic assemblage of rare earths, in agreement with results obtained for coexisting allanites, monazites, and zircons.

Nevada↗

USGS1976

The San Francisco cow; did she or didn’t she?

No one has suggested that Mr. Shafter's nameless cow was the cause of the 1906 earthquake, but she has been the source of as persistent a rumor as Mrs. Murphy's Chicago cow. Since 1906, "the cow that fell in the crack" has been a favorite subject of humorous speculation. large earthquakes have always produced large exaggerations, and, although it is difficult to exaggerate the terror humans feel in an earthquake, many scientists have said that much of what witnesses said they witnessed they did not witness at all. Huge, gaping cracks that legend says open and close in the earth, swallowing whole cities, are among those earthquake features that just aren't featured in earthquakes. True, soil may "snap open and shut," but most earth scientists do not think that the cracks are wide enough or deep enough to accommodate houses.

Earthquake Information Bulletin (USGS)↗

USGS1998

Using sediment 'fingerprints' to assess sediment-budget errors, north Halawa Valley, Oahu, Hawaii, 1991-92

Reliable estimates of sediment-budget errors are important for interpreting sediment-budget results. Sediment-budget errors are commonly considered equal to sediment-budget imbalances, which may underestimate actual sediment-budget errors if they include compensating positive and negative errors. We modified the sediment 'fingerprinting' approach to qualitatively evaluate compensating errors in an annual (1991) fine (<63 ??m) sediment budget for the North Halawa Valley, a mountainous, forested drainage basin on the island of Oahu, Hawaii, during construction of a major highway. We measured concentrations of aeolian quartz and 137Cs in sediment sources and fluvial sediments, and combined concentrations of these aerosols with the sediment budget to construct aerosol budgets. Aerosol concentrations were independent of the sediment budget, hence aerosol budgets were less likely than sediment budgets to include compensating errors. Differences between sediment-budget and aerosol-budget imbalances therefore provide a measure of compensating errors in the sediment budget. The sediment-budget imbalance equalled 25% of the fluvial fine-sediment load. Aerosol-budget imbalances were equal to 19% of the fluvial 137Cs load and 34% of the fluval quartz load. The reasonably close agreement between sediment- and aerosol-budget imbalances indicates that compensating errors in the sediment budget were not large and that the sediment-budget imbalance as a reliable measure of sediment-budget error. We attribute at least one-third of the 1991 fluvial fine-sediment load to highway construction. Continued monitoring indicated that highway construction produced 90% of the fluvial fine-sediment load during 1992. Erosion of channel margins and attrition of coarse particles provided most of the fine sediment produced by natural processes. Hillslope processes contributed relatively minor amounts of sediment.

Earth Surface Processes and Landforms↗

USGS2016

Comment on “The reduction of friction in long-runout landslides as an emergent phenomenon” by Brandon C. Johnson et al.

Results from a highly idealized, 2-D computational model indicate that dynamic normal-stress rarefactions might cause friction reduction in long-runout landslides, but the physical relevance of the idealized dynamics has not been confirmed by experimental tests. More importantly, the model results provide no evidence that refutes alternative hypotheses about friction reduction mechanisms. One alternative hypothesis, which is strongly supported by field evidence, experimental data, and the predictions of a well-constrained computational model, involves development of high pore fluid pressures in deforming landslide material or overridden bed material. However, no scientific basis exists for concluding that a universal mechanism is responsible for friction reduction in all long-runout landslides.

Journal of Geophysical Research F: Earth Surface↗

USGS2017

Defining snow drought and why it matters

On 12 February, water resource managers at the Oroville Dam issued an evacuation warning that forced some 180,000 Californians to relocate to higher ground. The story of how conditions got to this point involves several factors, but two clearly stand out: the need to prevent water shortages during a record drought, followed by one of the wettest October–February periods in California history. The situation at Oroville Dam highlights difficulties that many reservoir managers face in managing flood risks while simultaneously storing water to mitigate severe droughts and smaller snowpacks. Central to this difficulty is the idea of “snow drought,” a term that’s gaining traction in both scientific and lay literature.

Eos, Earth and Space Science News↗

USGS1996

Origin and depositional environment of clastic deposits in the Hilo drill hole, Hawaii

Volcaniclastic units cored at depths of about 87, 164, 178, 226, and 246 m below sea level and carbonate units located between depths of 27 and 53 m below sea level in the Hilo drill core were found to be deposited at or near sea level. Four of these units are hydroclastic deposits, formed when subaerially erupted Mauna Loa lava flows entered the ocean and fragmented to produce quenched, glassy fragments during hydrovolcanic explosions. Ash units 24 and 26, at 178 m depth, accumulated at sea level in a freshwater bog. They contain pyroxenes crystallized from tholeiitic magma that we infer erupted explosively at the summit of Kilauea volcano. Two carbon‐rich layers from these ashes have a weighted average radiocarbon age of 38.6 ± 0.9 ka; the ashes probably correlate with the oldest and thickest part of the Pahala ash. Ash unit 44, at the transition from Mauna Kea to Mauna Loa lava flows, was probably nearly 3.2 m thick and is inferred to be equivalent to the lower thick part of the composite Homelani ash mapped in Hilo and on the flanks of Mauna Kea. The age of this part of Homelani ash is between 128 ± 33 and 200 ± 10 ka; it may have erupted subglacially during the Pohakuloa glacial maxima on Mauna Kea. Beach sand units 12 and 22 were derived from nearby Mauna Loa and Mauna Kea lava flows. The middle of beach sand unit 38 was derived mainly from lava erupted near the distal end of the subaerial east rift zone of Kilauea volcano; these sands were transported about 33 km northwest to Hilo Bay by prevailing longshore currents. Combined age, depth, and sea level markers in the core allow us to determine that lava flow recurrence intervals averaged one flow every 4 kyr during the past 86 kyr and one flow every 16 kyr between 86 and 200 ka at the drill site and that major explosive eruptions that deposit thick ash in Hilo have occurred only twice in the last 400 kyr. These recurrence intervals support the moderate lava flow hazard zonation (zone 3) for coastal Hilo previously determined from surficial mapping.

Journal of Geophysical Research B: Solid Earth↗

USGS1994

Cryovolcanism on the icy satellites

Evidence of past cryovolcanism is widespread and extremely varied on the icy satellites. Some cryovolcanic landscapes, notably on Triton, are similar to many silicate volcanic terrains, including what appear to be volcanic rifts, calderas and solidified lava lakes, flow fields, breached cinder cones or stratovolcanoes, viscous lava domes, and sinuous rilles. Most other satellites have terrains that are different in the important respect that no obvious volcanoes are present. The preserved record of cryovolcanism generally is believed to have formed by eruptions of aqueous solutions and slurries. Even Triton's volcanic crust, which is covered by nitrogen-rich frost, is probably dominated by water ice. Nonpolar and weakly polar molecular liquids (mainly N2, CH4, CO, CO2, and Ar), may originate by decomposition of gas-clathrate hydrates and may have been erupted on some icy satellites, but without water these substances do not form rigid solids that are stable against sublimation or melting over geologic time. Triton's plumes, active at the time of Voyager 2's flyby, may consist of multicomponent nonpolar gas mixtures. The plumes may be volcanogenic fumaroles or geyserlike emissions powered by deep internal heating, and, thus, the plumes may be indicating an interior that is still cryomagmatically active; or Triton's plumes may be powered by solar heating of translucent ices very near the surface. The Uranian and Neptunian satellites Miranda, Ariel, and Triton have flow deposits that are hundreds to thousands of meters thick (implying highly viscous lavas); by contrast, the Jovian and Saturnian satellites generally have plains-forming deposits composed of relatively thin flows whose thicknesses have not been resolved in Voyager images (thus implying relatively low-viscosity lavas). One possible explanation for this inferred rheological distinction involves a difference in volatile composition of the Uranian and Neptunian satellites on one hand and of the Jovian and Saturnian satellites on the other hand. Perhaps the Jovian and Saturnian satellites tend to have relatively "clean" compositions with water ice as the main volatile (ammonia and water-soluble salts may also be present). The Uranian and Neptunian satellites may possess large amounts of a chemically unequilibrated comet-like volatile assemblage, including methanol, formaldehyde, and a host of other highly water- and ammonia-water-soluble constituents and gas clathrate hydrates. These two volatile mixtures would produce melts that differ enormously in viscosity The geomorphologic similarity in the products of volcanism on Earth and Triton may arise partly from a rheological similarity of the ammonia-water-methanol series of liquids and the silicate series ranging from basalt to dacite. An abundance of gas clathrate hydrates hypothesized to be contained by the satellites of Uranus and Neptune could contribute to evidence of explosive volcanism on those objects. ?? 1995 Kluwer Academic Publishers.

Earth, Moon and Planets↗

USGS1988

Radarclinometry: Bootstrapping the radar reflectance function from the image pixel-signal frequency distribution and an altimetry profile

A method is derived for determining the dependence of radar backscatter on incidence angle that is applicable to the region corresponding to a particular radar image. The method is based on enforcing mathematical consistency between the frequency distribution of the image's pixel signals (histogram of DN values with suitable normalizations) and a one-dimensional frequency distribution of slope component, as might be obtained from a radar or laser altimetry profile in or near the area imaged. In order to achieve a unique solution, the auxiliary assumption is made that the two-dimensional frequency distribution of slope is isotropic. The backscatter is not derived in absolute units. The method is developed in such a way as to separate the reflectance function from the pixel-signal transfer characteristic. However, these two sources of variation are distinguishable only on the basis of a weak dependence on the azimuthal component of slope; therefore such an approach can be expected to be ill-conditioned unless the revision of the transfer characteristic is limited to the determination of an additive instrumental background level. The altimetry profile does not have to be registered in the image, and the statistical nature of the approach minimizes pixel noise effects and the effects of a disparity between the resolutions of the image and the altimetry profile, except in the wings of the distribution where low-number statistics preclude accuracy anyway. The problem of dealing with unknown slope components perpendicular to the profiling traverse, which besets the one-to-one comparison between individual slope components and pixel-signal values, disappears in the present approach. In order to test the resulting algorithm, an artificial radar image was generated from the digitized topographic map of the Lake Champlain West quadrangle in the Adirondack Mountains, U.S.A., using an arbitrarily selected reflectance function. From the same map, a one-dimensional frequency distribution of slope component was extracted. The algorithm recaptured the original reflectance function to the degree that, for the central 90% of the data, the discrepancy translates to a RMS slope error of 0.1 ???. For the central 99% of the data, the maximum error translates to 1 ???; at the absolute extremes of the data the error grows to 6 ???. ?? 1988 Kluwer Academic Publishers.

Earth, Moon and Planets↗

USGS1967

Ground-water research in the U.S.A.

Ground-water reservoirs and the overlying unsaturated zone-collectively, the "subsurface"-have an enormous capacity to supply water to wells and useful plants, to store water to meet future needs for the same purposes, and, under suitable precautions, to accept wastes. This capacity can be exploited on a maximum scale, however, only on the basis of information one or more orders of magnitude greater than that available at present on the distribution, recoverability, and replenishability of subsurface water. Because usable water must be made available, and waste water must be disposed of, at costs of only a cent or a few cents per cubic meter, there is a critical need for research to devise methods of accomplishing these water-management tasks at reasonable cost. Among the chief target areas for research in subsurface hydrology are permeability distribution, including vertical permeability; prediction of the departure of the storage coefficient from the theoretically "instantaneous" property assumed in flow equations; theory of unsaturated flow based on fundamental soil characteristics that can be measured practicably; geochemical relations including the effects of injecting water of one composition into zones occupied by waters of different composition, generation of acid mine water, occurrence of saline water, and salt-fresh-water relations in coastal and other areas; prediction of the fate of wastes injected underground; geophysical techniques both surface and subsurface to extend, at low cost, information obtained by other means; and practical techniques of artificial recharge, especially through wells. ?? 1967.

Earth-Science Reviews↗

USGS2026

An entropic explanation for Gutenberg-Richter scaling

We develop a simple explanation for Gutenberg-Richter (G-R) size scaling of earthquakes on a single fault. We discretize the fault and consider all possible contiguous ruptures at that level of discretization. In this static model, we assume that slip scales with rupture length, and that the rupture rates at each point along the fault are consistent with an a priori long-term slip rate. These simple assumptions define an (under-determined) non-negative least-squares inverse problem. Each solution to this inverse problem is a set of earthquake rates that matches the slip-rate constraint. We use a Markov Chain Monte Carlo (MCMC) algorithm to uniformly sample the solution space assuming constant slip rates along the fault. At finer discretizations, deviations from G-R behavior decrease, which is consistent with an entropic pressure towards G-R solutions. When the fault is discretized into 10 or more segments, random solutions found by the MCMC algorithm have G-R size scaling, even though there are trivial solutions that, for example, have earthquakes of only one size. This is because there are simply far more solutions that have G-R scaling; as the problem size increases, the strong degeneracy of GR solutions results in other solutions becoming improbably rare. Also, the entropically favored G-R distribution has a b -value of approximately 1, which agrees with measured b -values in real earthquake catalogs.

JGR Solid Earth↗