USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ground-water Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS1998

Estimated water use in Puerto Rico, 1995

Water-use data during calendar year 1995 was compiled for the 78 municipios of the Commonwealth of Puerto Rico. Eight offstream water-use categories were considered during the study: public supply, wastewater treatment discharges, domestic, industrial, mining, thermoelectric power, livestock, and irrigation. Three instream water-use categories were considered: hydroelectric power, saline water used at thermoelectric power plants, and reservoir evaporation. Freshwater withdrawals for offstream use from surface- and ground-water sources in Puerto Rico were estimated to be 566 million gallons per day. The largest amount of freshwater withdrawn was 431 million gallons per day for public supply. Total discharge from public wastewater treatment facilities was reported as 185 million gallons per day. Fresh surface- and ground-water withdrawals for domestic and industrial self-supplied facilities were estimated to be about 19 million gallons per day. Mining activities, which in Puerto Rico are mostly limited to the production of sand and gravel, withdrew about 4.2 million gallons per day of freshwater. Livestock activities used 6.3 million gallons per day from surface- and ground-water sources to meet the water needs of the 12.1 million animals counted in the 1992 Census of Agriculture in Puerto Rico. Self-supplied ground-water withdrawals for thermoelectric facilities were estimated to be 2.2 million gallons per day. Freshwater withdrawals for irrigation purposes were estimated to be 103 million gallons per day, or approximately 18 percent of all offstream freshwater withdrawals. Instream freshwater withdrawals by hydroelectric facilities were 349 million gallons per day. Reservoir evaporation is considered to be a consumptive use associated with the storage of water. The evaporation from 15 reservoirs in Puerto Rico was estimated to average about 23,900 acre-feet from a total reservoir surface area of 6,900 acres. The largest amount of withdrawals was 2,260 million gallons per day of saline water (instream use) for thermoelectric power.

Open-File Report↗
USGS2007

MMA, A Computer Code for Multi-Model Analysis

This report documents the Multi-Model Analysis (MMA) computer code. MMA can be used to evaluate results from alternative models of a single system using the same set of observations for all models. As long as the observations, the observation weighting, and system being represented are the same, the models can differ in nearly any way imaginable. For example, they may include different processes, different simulation software, different temporal definitions (for example, steady-state and transient models could be considered), and so on. The multiple models need to be calibrated by nonlinear regression. Calibration of the individual models needs to be completed before application of MMA. MMA can be used to rank models and calculate posterior model probabilities. These can be used to (1) determine the relative importance of the characteristics embodied in the alternative models, (2) calculate model-averaged parameter estimates and predictions, and (3) quantify the uncertainty of parameter estimates and predictions in a way that integrates the variations represented by the alternative models. There is a lack of consensus on what model analysis methods are best, so MMA provides four default methods. Two are based on Kullback-Leibler information, and use the AIC (Akaike Information Criterion) or AICc (second-order-bias-corrected AIC) model discrimination criteria. The other two default methods are the BIC (Bayesian Information Criterion) and the KIC (Kashyap Information Criterion) model discrimination criteria. Use of the KIC criterion is equivalent to using the maximum-likelihood Bayesian model averaging (MLBMA) method. AIC, AICc, and BIC can be derived from Frequentist or Bayesian arguments. The default methods based on Kullback-Leibler information have a number of theoretical advantages, including that they tend to favor more complicated models as more data become available than do the other methods, which makes sense in many situations. Many applications of MMA will be well served by the default methods provided. To use the default methods, the only required input for MMA is a list of directories where the files for the alternate models are located. Evaluation and development of model-analysis methods are active areas of research. To facilitate exploration and innovation, MMA allows the user broad discretion to define alternatives to the default procedures. For example, MMA allows the user to (a) rank models based on model criteria defined using a wide range of provided and user-defined statistics in addition to the default AIC, AICc, BIC, and KIC criteria, (b) create their own criteria using model measures available from the code, and (c) define how each model criterion is used to calculate related posterior model probabilities. The default model criteria rate models are based on model fit to observations, the number of observations and estimated parameters, and, for KIC, the Fisher information matrix. In addition, MMA allows the analysis to include an evaluation of estimated parameter values. This is accomplished by allowing the user to define unreasonable estimated parameter values or relative estimated parameter values. An example of the latter is that it may be expected that one parameter value will be less than another, as might be the case if two parameters represented the hydraulic conductivity of distinct materials such as fine and coarse sand. Models with parameter values that violate the user-defined conditions are excluded from further consideration by MMA. Ground-water models are used as examples in this report, but MMA can be used to evaluate any set of models for which the required files have been produced. MMA needs to read files from a separate directory for each alternative model considered. The needed files are produced when using the Sensitivity-Analysis or Parameter-Estimation mode of UCODE_2005, or, possibly, the equivalent capability of another program. MMA is constructed using

Techniques and Methods↗
USGS1948

Ground water in the Anadarko area [Caddo County], Oklahoma

This report offers a preliminary interpretation of the geology and ground-water hydrology of the Anadarko area, Oklahoma. L.V. Davis prepared the accompanying map from aerial photographs and furnished much of the geologic information, and records of the State Mineral Survey (WPA) were used in the preparation of the section on the Rush Springs sandstone. (available as photostat copy only)

Oklahoma↗
USGS1979

Records of selected wells, springs, and test holes, in the Royal, upper Presumpscot, and upper Saco River basins in Maine

The area discussed in this report includes about 1200 square miles in southwestern Maine. Location of the area is shown on the cover, and a sketch map identifying the topographic quadrangles for the study area is given in figure 1. The northern boundary of the area is the divide between the Androscoggin River drainage basin on the north and the Saco, Presumpscot, and Royal River drainage basins on the south. The western boundary is the Maine-New Hampshire State line, and the southwestern boundary is the Little Ossipee River. The southeastern boundary is the mid-latitude of the Gray and Freeport 15-minute topographic quadrangles. The greatest part of the area is in Cumberland and Oxford Counties, a smaller area is in York County, and a small fraction is in Androscoggin County. Included are parts or all of 15 towns in Cumberland County, 15 towns in Oxford County, 5 towns in York County, and 2 towns in Androscoggin County. The report contains geologic and hydrologic data collected as part of an investigation of the surficial geology and ground-water resources made by the U.S. Geological Survey in cooperation with the Maine Public Utilities Commission. These data are made available for use in planning the development of natural resources. An interpretive report containing maps of surficial geology and ground-water availability and related geologic and hydrologic information will be published in the Survey's Water-Resources Investigations series.

Maine↗
USGS1994

Modeling and analysis of the 1949 Narrows landslide, Tacoma, Washington

A large landslide failed catastrophically along steep, 90-m (300-ft) high bluffs overlooking the waters of Puget Sound at Tacoma, Washington, in April of 1949, three days after the region was struck by a magnitude 7.1 earthquake. The area of failure was investigated to estimate the static and seismic stability of the pre-earthquake slope and to identify factors that contributed to the failure. Results of static analyses suggest that the slope was marginally stable and that high ground-water conditions would have significantly reduced slope stability. The Newmark analysis of dynamic (seismic) slope stability was used to calculate predicted inertial displacements for the landslide for a range of possible material property and ground-water conditions. Comparison of predicted displacements with a reported displacement suggests that the ground motion could have initiated the large-scale failure. Results of the study provide a basis for discussion and comparison of similar bluffs in the Puget Sound region that may be susceptible to catastrophic, earthquake-induced slope failure.

Washington↗
USGS1948

Index of surface-water records, part 3, Ohio River basin, to September 30, 1948

This report summarizes ground-water-quality data, for Wisconsin, stored in the U.S. Geological Survey 's computer system (WATSTORE). The summary includes water-quality data for 2,443 wells which tap one of the State 's three major aquifers (sand and gravel, Silurian dolomite, and sandstone). Data for dissolved solids, hardness, alkalinity, calcium, magnesium, sodium, potassium, iron, manganese, sulfate, chloride, fluoride, and nitrate are summarized by aquifer and by county, and locations of wells where data are available are shown for each aquifer. Calcium, magnestium, and bicarbonate (the principal component of alkalinity) are the major dissolved constituents present in Wisconsin 's ground water. High iron concentrations and hardness cause ground-water-quality problems in much of the State. Statewide summaries of trace constituent (selected trace metals, arsenic, boron, and organic carbon) concentrations show that they impair water quality in only a few isolated wells. A bibliography of published reports that describe or summarize various aspects of ground-water quality in Wisconsin is included. (USGS)

Wisconsin↗
USGS2007

Geologic Characterization of Young Alluvial Basin-Fill Deposits from Drill Hole Data in Yucca Flat, Nye County, Nevada

Yucca Flat is a topographic and structural basin in the northeastern part of the Nevada Test Site (NTS) in Nye County, Nevada, that has been the site of numerous underground nuclear tests; many of these tests occurred within the young alluvial basin-fill deposits. The migration of radionuclides to the Paleozoic carbonate aquifer involves passage through this thick, heterogeneous section of Tertiary and Quaternary rock. An understanding of the lateral and vertical changes in the material properties of young alluvial basin-fill deposits will aid in the further development of the hydrogeologic framework and the delineation of hydrostratigraphic units and hydraulic properties required for simulating ground-water flow in the Yucca Flat area. This report by the U.S. Geological Survey, in cooperation with the U.S. Department of Energy, presents data and interpretation regarding the three-dimensional variability of the shallow alluvial aquifers in areas of testing at Yucca Flat, data that are potentially useful in the understanding of the subsurface flow system. This report includes a summary and interpretation of alluvial basin-fill stratigraphy in the Yucca Flat area based on drill hole data from 285 selected drill holes. Spatial variations in lithology and grain size of the Neogene basin-fill sediments can be established when data from numerous drill holes are considered together. Lithologic variations are related to different depositional environments within the basin including alluvial fan, channel, basin axis, and playa deposits.

Open-File Report↗