USGS Science⌕ Search

SEARCH · USGS Science

Results for “Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

939 records · Page 41Linked to original sources
USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗
USGS2026

Rapid earthquake magnitude classification via P-wave strains from borehole strainmeters and Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) offers a promising approach for earthquake early warning (EEW) in settings where seismic networks are costly to maintain. By repurposing fiber-optic cables as dense strainmeter arrays, DAS enables real-time earthquake detection wherever those fibers are accessible. However, poor azimuthal coverage and challenges in estimating magnitude from strain measurements remain key hurdles in applying for earthquake monitoring. Here, we develop a machine learning method to distinguish large (M≥5.4) earthquakes from smaller ones within the first 4 seconds of a strain waveform after a P-wave arrival without determining location. Using ensemble decision tree models trained on borehole strainmeter data (3.5≤M≤7.1) and tested on onshore DAS waveforms (including the 2024 M7 Offshore Cape Mendocino earthquake), we find that low-frequency (0.2–0.5 Hz) continuous wavelet transform coefficients are the strongest predictors of magnitude, in addition to strain amplitude. Both DAS and borehole strainmeters effectively capture long-period strain signals, making these findings valuable for EEW systems. Our method shows high precision compared to the real-time EEW system, ShakeAlert®, supporting the position that DAS is a viable technology for earthquake monitoring and magnitude classification.

California↗
USGS1999

Comparison of two approaches for determining ground-water discharge and pumpage in the lower Arkansas River Basin, Colorado, 1997-98

In March 1994, the Colorado Division of Water Resources (CDWR) adopted “Rules Governing the Measurement of Tributary Ground Water Diversions Located in the Arkansas River Basin” (Office of the State Engineer, 1994); these initial rules were amended in February 1996 (Office of the State Engineer, 1996). The amended rules require users of wells that divert tributary ground water to annually report the water pumped monthly by each well. The rules allow a well owner to report the pumpage measured by a totalizing flowmeter (TFM) or pumpage determined from electrical power data and a power conversion coefficient (PCC) (Hurr and Litke, 1989). Opinions by representatives of the State of Kansas, presented before the Special Master hearing a court case [State of Kansas v. State of Colorado, No. 105 Original (1996)] concerning post-Compact well pumping, stated that the PCC approach does not provide the same level of accuracy and reliability as a TFM when used to determine pumpage. In 1997, the U.S. Geological Survey (USGS), in cooperation with the CDWR, began a 2-year study to compare ground-water pumpage estimates made using the TFM and the PCC approaches. The study area was along the Arkansas River between Pueblo, Colorado, and the Colorado-Kansas State line (fig. 1). The two approaches for estimating ground-water discharge and pumpage were compared for more than 100 wells completed in the alluvial aquifer of the Arkansas River Basin. The TFM approach uses an inline flowmeter to directly measure instantaneous discharge and the total volume of water pumped at a well. The PCC approach uses electrical power consumption records and a power conversion coefficient to estimate the pumpage at ground-water wells. This executive summary describes the results of the comparison of the two approaches. Specifically, (1) the differences in instantaneous discharge measured with three portable flowmeters and measured with an inline TFM are evaluated, and the statistical differences in paired instantaneous discharge between the two approaches are determined; (2) short- and long-term variations in the PCC’s are presented; (3) differences in pumpage between the two approaches are evaluated, and the statistical differences in pumpage between the two approaches are determined; (4) potential sources of discrepancy between pumpage estimates are discussed; and (5) differences in total network pumpage using the two approaches are presented. During the irrigation seasons of 1997 and 1998, instantaneous discharge and electrical power demand were measured at randomly selected wells to determine PCC’s. At more than 100 wells, the PCC’s determined during the 1998 season were applied to total electrical power consumption data that was recorded between the initial and final readings at each network well site in 1998 to estimate total ground-water pumpage. At each site, an inline TFM was installed in a full-flowing, acceptable test section of pipe on the discharge side of the pump where the measurement of discharge was made. Measurements of instantaneous ground-water discharge also were made using three different types of portable flowmeters. The average velocity multiplied by the cross-sectional area of the discharge pipe was used to compute the discharge in gallons per minute. Whenever possible, discharge measurements were made at each network site using all three types of portable flowmeters.

Colorado↗
USGS2024

Turbidite correlation for paleoseismology

Marine turbidite paleoseismology relies on the assumption of synchronous triggering of turbidity currents by earthquake shaking to infer rupture extent and recurrence. Such inference commonly depends on age dating and correlation of the physical stratigraphy of deposits carried by turbidity currents (i.e., turbidites) across great distances. Along the Cascadia subduction zone, which lies offshore the Pacific Northwest, USA, turbidite facies in core photographs, X-ray computed tomography images, and magnetic susceptibility (MS) data exhibit differences in character over relatively short distances, which implies that not all deposits can be correlated with confidence. Thus, subjective correlation based on expected similarity over great distances and weak age constraints does not independently support paleoseismic models. We present a new method for correlating turbidites along the Cascadia margin that can yield a more objective and repeatable stratigraphic framework to underpin earthquake recurrence. We use dynamic time warping to correlate MS logs and measure correlation coefficients of core pairs to evaluate correlation strength. We then compare these measures to a distribution of correlation coefficients of randomly generated turbidite sequences and find that only a small number of core pairs can be correlated more confidently than randomly stacked turbidites. This methodology promises a more robust correlation strategy for future stratigraphic studies.

Oregon, Washington↗
USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗
USGS1991

Reconnaissance of the occurrence of agricultural chemicals in ground water in Haywood, Lake, Obion and Shelby Counties, Tennessee

Data on the occurrence of agricultural chemicals in ground wafer in Tennessee are sparse. The surficial alluvial aquifer is an important source of domestic water supply in West Tennessee, and potentially is subject fo contamination from the application of agricultural chemicals in the area. Nineteen shallow wells completed in the alluvial aquifers in areas of high density agricultural use were sampled in the winter and again in the summer of 1988 to ascertain the occurrence of agricultural chemical in ground water. Although no triazine herbicides or organophosphorus insecticides were detected in any of the wells sampled, elevated nitrite plus nitrate (as nitrogen) concentrations were detected. Results from the winter sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 7.8 milligrams per liter with a median concentration of 2.6 milligrams per liter. Results from the summer sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 8.9 milligrams per liter, median, 2.5 milligrams per liter. The highest concentrations occurred in the shallowest wells, and, in one instance, in a shallow well near a heavily irrigated field.

Tennessee↗
USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗
USGS2026

Variability and consistency in wildfire susceptibility: Insights from a national compilation

Background Wildfire risk in the United States is rising and remains a land management priority. The quantitative wildfire risk assessment (QWRA) framework integrates fuels, topography, weather and values at risk to estimate the potential change in value from wildfire. Within this, response functions (RFs) represent how values respond to fire intensity. These are often based on expert judgment, but variation across assessments is unclear. Aims This study uses data from the US Geological Survey (USGS) Wildfire Hazard and Risk Assessment Clearinghouse to characterize consistency and variation across categories and contexts. Methods We applied descriptive statistics to summarize RFs, using tables, box-and-whisker plots and heat maps stratified by highly valued resource or asset (HVRA) category and spatial scale. Key results RFs and value definitions vary, especially for ecosystem-related resources. Some functions, such as for buildings in the wildland–urban interface (WUI), translate well across contexts, while others require more input. Conclusions Some functions are broadly transferable, while others need customization. This analysis provides references and starting points for improvement to RFs in QWRAs. Interpretations Expanding the clearinghouse and dataset and building more transparency in expert elicitation can build trust among communities, agencies and end-users, and can support efficient use of limited resources to mitigate wildfire risk.

International Journal of Wildland Fire↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗
USGS2025

Long-term trends in microseismicity during operational shut-ins at the Coso Geothermal Field, California

Pausing injection and production can lead to induced seismicity in a variety of settings, with some of the largest events occurring during these so-called shut-ins. In geothermal fields, shut-ins are periodically conducted for maintenance on wells and surface infrastructure, thereby offering recurring means of estimating stress changes in the subsurface that lead to increased seismicity rates. Here, we examine daily production and microseismicity data from the Coso Geothermal Field (CGF) in California between 1996 and 2010 to investigate the repetitive trends of operational shut-in microseismicity. Using 24 local seismic stations, we first analyze spatial and temporal trends of over 60,000 earthquakes with magnitudes between -0.4 to 3.8. We find that the northern region exhibits no significant seismicity changes during shut-ins, whereas the rest of the field experiences induced seismicity during almost every shut-in with an increasing intensity towards the southern and eastern portions of the field, highlighting local differences in stress within the CGF. Additionally, we cluster the seismicity using waveform cross-correlation, revealing several earthquake clusters primarily occurring during shut-in periods. These observations suggest that certain fracture and fault sections respond quicker to changes in pore pressure and poroelastic stresses within the geothermal system, possibly highlighting main fluid pathways.

California↗
USGS2026

Production of mineral commodities and geospatial map of the mineral industries and related infrastructure of China

As part of the U.S. Geological Survey’s (USGS) mission to distribute global mineral information and analyze supply chains, this study provides a comprehensive review of the global significance of China’s mineral production and capacity in 2023. Of 77 mineral commodities in the USGS dataset, China produced 74 and was the world’s first-ranked producer for 39 of the 74. Compared to the high share of global mineral production, including up to 98 percent of global gallium production, the country’s share of global mineral reserves was relatively small, ranging from 20 percent (zinc ore) to 52 percent (tungsten ore). China’s imports of metal ores, slag, and ash accounted for 64 percent of global imports of such commodities by value. The country’s exports of base metals and articles of base metal accounted for 17 percent of the global exports. To help nongeographic information system users assess the spatial distribution of mineral mines, processing facilities, and ports for trades in China, this study created a geospatial (also called “georeferenced”) portable document format (GeoPDF) map. In addition, the GeoPDF contains mineral resource tracts (such as antimony, copper, potash, coal, and oil and gas), exploration sites, and energy infrastructure based on the preexisting USGS data.

Open-File Report↗
USGS2026

Coastal barrier resilience and resistance: Analysis and metrics for characterizing coastal state

Barrier islands are shaped by a variety of short- and long-term environmental processes such as storms and relative sea-level rise. These islands, found along the estuarine-marine interface, provide ecosystem services including storm surge and wave attenuation, erosion protection to inland marshes, habitat for fish and wildlife, and recreation. Natural resource managers require actionable information on how barrier island resilience and resistance changes over time to understand how an island’s current state relates to past conditions and to inform restoration prioritization and implementation. The U.S. Geological Survey and The Water Institute collaborated on a study to develop indicators of resilience and resistance for barrier islands in Louisiana. Here, resilience captures island persistence on yearly to decadal time scales, and resistance captures persistence on event time scales of days to weeks. The indicators fall in two categories: Tier 1 Screening Metrics, that can be readily calculated from available data, are easily interpretable as an evaluation of barrier condition, and provide a high-level snapshot of overall barrier resilience and resistance; and Tier 2 Analysis Metrics, which are detailed metrics that required specialized analysis and interpretation and are more applicable to answering specific questions managers may have about barrier state. The research team derived Tier 1 resilience indicators from subaerial land and vegetation cover calculated from publicly available maps and products based on satellite imagery. By benchmarking the total land and vegetation extent against their respective historical maxima, this metric provides a snapshot of an island’s current state in the context of its long-term trajectory. The research team developed Tier 1 resistance indicators based on subaerial island configuration and water level recurrence as a proxy for evaluating island resistance to storms, which are the primary driver of short-term change. These Tier 1 metrics can be analyzed over time to provide a high-level assessment of how an island’s resistance decreases because of elevation loss or sea-level rise or increases due to restoration or natural recovery. The research team developed Tier 2 resilience and resistance indicators and associated analyses to provide detailed information for specific time periods or applications (e.g., wildlife management). These metrics include habitat coverage from high-resolution maps, which show composition changes over time to capture the evolving resilience of specific habitat types; high tide flooding analysis, which evaluate island area relative to specified flooding thresholds to characterize resistance in the short-term or, if analyzed over time, indicate changes in resilience; and hypsometric curve analysis, which allows managers to evaluate island area changes above their own elevation benchmarks of interest and similarly characterize resistance in the short-term or indicate changes in resilience if assessed over time. The research team calculated Tier 1 metrics of the barrier islands and headlands along the coast of Louisiana for the period of 1984 through 2021 and Tier 2 metrics for select times during that period depending on data available and quality. The results were captured in a report card for each barrier, which also includes an overview of the metrics and their interpretation; a restoration and storm history; and Tier 1 and Tier 2 metric analysis, including benchmarking against coastwide and regional values as well as to an island’s pre-restoration trajectory. These report cards provide a readily digestible synthesis of barrier condition and trajectory that coastal managers can use to support restoration prioritization and other decisions.

Louisiana↗
USGS2024

Interactive effects of salinity and hydrology on radial growth of bald cypress (Taxodium distichum (L.) Rich.) in coastal Louisiana, USA

Tidal freshwater forests are usually located at or above the level of mean high water. Some Louisiana coastal forests are below mean high water, especially bald cypress ( Taxodium distichum (L.) Rich.) forests because flooding has increased due to the combined effects of global sea level rise and local subsidence. In addition, constructed channels from the coast inland act as conduits for saltwater. As a result, saltwater intrusion affects the productivity of Louisiana’s coastal bald cypress forests. To study the long-term effects of hydrology and salinity on the health of these systems, we fitted dendrometer bands on selected trees to record basal area increment as a measure of growth in permanent forest productivity plots established within six bald cypress stands. Three stands were in freshwater sites with low salinity rooting zone groundwater (0.1–1.3 ppt), while the other three had higher salinity rooting zone groundwater (0.2–4.9 ppt). Water level was logged continuously, and salinity was measured monthly to quarterly on the surface and in groundwater wells. Higher groundwater salinity levels were related to decreased bald cypress radial growth, while higher freshwater flooding increased radial growth. With these data, coastal managers can model rates of bald cypress forest change as a function of salinity and flooding.

Louisiana↗
USGS2024

Development of USGS NSHMs: Do small changes in hazard imply small changes in risk?

One of the flagship products from the U.S. Geological Survey (USGS) is the National Seismic Hazard Model (NSHM). Since 1976, the NSHM has been periodically updated to reflect newly published earthquake science and provide probabilistic estimates of seismic hazard for the United States. During each update cycle, alternative models are deliberated, analyzed, and documented through logic trees and their corresponding logic tree branch weights. For example, the decision to modify a logic tree branch weight may be influenced by sensitivity analyses of the logic tree branches in their effects on the mean hazard. However, do small changes in traditional measures of hazard imply small changes in risk? In this study, we make use of two update cycles of the USGS NSHMs and a National Bridge Inventory (NBI) from the Federal Highway Administration (FHWA) to explore the preceding question. Specifically, we first identify geographic locations in the conterminous United States in which the change in hazard from one cycle to another is relatively small. Next, we model the seismic risk to highway bridges for these locations and for each update cycle, while simultaneously distinguishing low hazard environments from high hazard environments. These data enable quantitative analysis of how much changes in risk can be expected given small changes in hazard, investigating the importance of risk models in decision-making during development of the USGS NSHMs.

Conference Paper↗
USGS2023

3D Dynamic rupture modeling of the 6 February 2023, Kahramanmaraş, Turkey Mw 7.8 and 7.7 earthquake doublet using early observations

The 2023 Turkey earthquake sequence involved unexpected ruptures across numerous fault segments. We present 3D dynamic rupture simulations to illuminate the complex dynamics of the earthquake doublet. Our models are constrained by observations available within days of the sequence and deliver timely, mechanically consistent explanations of the unforeseen rupture paths, diverse rupture speeds, multiple slip episodes, heterogeneous fault offsets, locally strong shaking, and fault system interactions. Our simulations link both earthquakes, matching geodetic and seismic observations and reconciling regional seismotectonics, rupture dynamics, and ground motions of a fault system represented by 10 curved dipping segments and embedded in a heterogeneous stress field. The M w 7.8 earthquake features delayed backward branching from a steeply branching splay fault, not requiring supershear speeds. The asymmetrical dynamics of the distinct, bilateral M w 7.7 earthquake are explained by heterogeneous fault strength, prestress orientation, fracture energy, and static stress changes from the previous earthquake. Our models explain the northward deviation of its eastern rupture and the minimal slip observed on the Sürgü fault. 3D dynamic rupture scenarios can elucidate unexpected observations shortly after major earthquakes, providing timely insights for data‐driven analysis and hazard assessment toward a comprehensive, physically consistent understanding of the mechanics of multifault systems.

The Seismic Record↗
USGS2026

Geologic map of the Sierra Nevada, California and western Nevada

THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation

California, Nevada↗
USGS2026

Decadal trends and occurrence of geogenic constituents and mixtures in groundwater across the continental United States

Worldwide, about 50% of the population is served by groundwater-sourced drinking water. Numerous groundwater quality assessments have found that geogenic constituents are among the most common contaminants in drinking-water aquifers. Documenting changing groundwater quality is a crucial aspect of water availability assessments. We assess trends and occurrence of geogenic constituent concentrations in groundwater across the continental United States using 3 decades of data from the U.S. Geological Survey’s National Water Quality Network. Thousands of groundwater wells were grouped into agricultural, urban, or domestic supply network types. Although most networks and constituents had no statistically significant change in concentration, many had increasing concentration trends, elevated concentrations, or both. Lithium, sodium, radium, sulfate, and uranium had increasing trends in more than 10% of the study networks. Urban and domestic well networks had increasing lithium and sodium trends more often than agricultural networks. Manganese most commonly increased in domestic well networks; uranium more commonly increased in agricultural and urban networks. Elevated concentration mixtures were widespread, and mixture complexities appeared to increase over time. Our results indicate that more than 2.3 million domestic-well users may be affected by elevated concentrations of one or more geogenic constituents.

continental United States↗