SEARCH · USGS Science

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

USGS2011

Analysis of formation pressure test results in the Mount Elbert methane hydrate reservoir through numerical simulation

Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating “Mount Elbert C2 zone like reservoir”, “PBU L-Pad like reservoir” and “PBU L-Pad down dip like reservoir” were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16 × 10 6 m 3 /well to 8.22 × 10 8 m 3 /well depending mainly on the initial temperature of the reservoir and on the production method. This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods.

Marine and Petroleum Geology↗

USGS2013

Scientific results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2)

As a part of Korean National Gas Hydrate Program, the Second Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) was conducted from 9 July to 30 September, 2010 in the Ulleung Basin, East Sea, offshore Korea using the D/V Fugro Synergy. The UBGH2 was performed to understand the distribution of gas hydrates as required for a resource assessment and to find potential candidate sites suitable for a future offshore production test, especially targeting gas hydrate-bearing sand bodies in the basin. The UBGH2 sites were distributed across most of the basin and were selected to target mainly sand-rich turbidite deposits. The 84-day long expedition consisted of two phases. The first phase included logging-while-drilling/measurements-while-drilling (LWD/MWD) operations at 13 sites. During the second phase, sediment cores were collected from 18 holes at 10 of the 13 LWD/MWD sites. Wireline logging (WL) and vertical seismic profile (VSP) data were also acquired after coring operations at two of these 10 sites. In addition, seafloor visual observation, methane sensing, as well as push-coring and sampling using a Remotely Operated Vehicle (ROV) were conducted during both phases of the expedition. Recovered gas hydrates occurred either as pore-filling medium associated with discrete turbidite sand layers, or as fracture-filling veins and nodules in muddy sediments. Gas analyses indicated that the methane within the sampled gas hydrates is primarily of biogenic origin. This paper provides a summary of the operational and scientific results of the UBGH2 expedition as described in 24 papers that make up this special issue of the Journal of Marine and Petroleum Geology.

East Sea Of Korea;Ulleung Basin↗

USGS2020

Well predictive performance of play-wide and Subarea Random Forest models for Bakken productivity

In recent years, geologists and petroleum engineers have struggled to clearly identify the mechanisms that drive productivity in horizontal, hydraulically-fractured oil wells producing from the middle member of the Bakken formation. This paper fills a gap in the literature by showing how this play’s heterogeneity affects factors that drive well productivity. It is important because understanding the relative strength of productivity drivers and how predictors vary spatially facilitates best-practices for well site selection and well completion design. The paper describes an application of the Random Forest (RF) machine learning technique to identify these mechanisms and to evaluate their importance across 9 subareas of the North Dakota portion of the Bakken play. The study examined productivity of 7311 wells initiating production from 2010 through 2017. Well productivity varied considerably across the 9 subareas within the play, so it was not surprising that the dominant predictors, the initial 180-day water cut and the 30-day initial gas production, vary spatially to mirror local conditions that strongly affect well productivity. The relative importance of well completion predictor variables, that is, the numbers of fractures stages per well, volume of injected proppant per stage, volume of injected fluids per stage, and lateral length, varied considerably across the subareas. Statistical permutation tests are presented that generally confirm the importance rankings. Subarea Random Forest models explained from 50 percent to 82 percent of the variation in productivity test samples while the play-wide model explained 73 percent of the test sample well productivity. Weakness in the predictive ability of the Random Forest models are traced to the limited variability in the training data. Implications of the empirical findings regarding the Bakken play for operators and for research and government institutions are discussed in the concluding section.

Montana, North Dakota, South Dakota↗

USGS2006

Derivation of planetary topography using multi-image shape-from-shading

In many cases, the derivation of high-resolution digital terrain models (DTMs) from planetary surfaces using conventional digital image matching is a problem. The matching methods need at least one stereo pair of images with sufficient texture. However, many space missions provide only a few stereo images and planetary surfaces often possess insufficient texture. This paper describes a method for the generation of high-resolution DTMs from planetary surfaces, which has the potential to overcome the described problem. The suggested method, developed by our group, is based on shape-from-shading using an arbitrary number of digital optical images, and is termed "multi-image shape-from-shading" (MI-SFS). The paper contains an explanation of the theory of MI-SFS, followed by a presentation of current results, which were obtained using images from NASA's lunar mission Clementine, and constitute the first practical application with our method using extraterrestrial imagery. The lunar surface is reconstructed under the assumption of different kinds of reflectance models (e.g. Lommel-Seeliger and Lambert). The represented results show that the derivation of a high-resolution DTM of real digital planetary images by means of MI-SFS is feasible.

Planetary and Space Science↗

USGS2008

The imaging performance of the SRC on Mars Express

The Mars Express spacecraft carries the pushbroom scanner high-resolution stereo camera (HRSC) and its added imaging subsystem super resolution channel (SRC). The SRC is equipped with its own optical system and a 1024×1024 framing sensor. SRC produces snapshots with 2.3 m ground pixel size from the nominal spacecraft pericenter height of 250 km, which are typically embedded in the central part of the large HRSC scenes. The salient features of the SRC are its light-weight optics, a reliable CCD detector, and high-speed read-out electronics. The quality and effective visibility of details in the SRC images unfortunately falls short of what has been expected. In cases where thermal balance cannot be reached, artifacts, such as blurring and “ghost features” are observed in the images. In addition, images show large numbers of blemish pixels and are plagued by electronic noise. As a consequence, we have developed various image improving algorithms, which are discussed in this paper. While results are encouraging, further studies of image restoration by dedicated processing appear worthwhile. The SRC has obtained more than 6940 images at the time of writing (1 September 2007), which often show fascinating details in surface morphology. SRC images are highly useful for a variety of applications in planetary geology, for studies of the Mars atmosphere, and for astrometric observations of the Martian satellites. This paper will give a full account of the design philosophy, technical concept, calibration, operation, integration with HRSC, and performance, as well as science accomplishments of the SRC.

Planetary and Space Science↗

USGS2023

Future direction of fuels management in sagebrush rangelands

Sagebrush ecosystems in the United States have been declining since EuroAmerican settlement, largely due to agricultural and urban development, invasive species, and altered fire regimes, resulting in loss of biodiversity and wildlife habitat. To combat continued conversion to undesirable ecological states and loss of habitat to invasive species fueled by frequent fire, a variety of fuel treatments, including networks of fuel breaks, are being implemented or proposed in sagebrush ecosystems, particularly in and around the Great Basin. In this forum paper we briefly review current knowledge of common fuel treatment approaches, their intended benefits, potential risks, and limitations. We additionally discuss challenges for fuel treatment strategies in the context of changes in climate, invasive species, wildlife habitat, and human population, and we explore how advances in geospatial technologies, monitoring, and fire behavior modeling, as well as accounting for social context, can improve the efficacy of fuels management in sagebrush ecosystems. Finally, given continued potential for ecosystem transformation, we describe approaches to future fuels management by considering the applicability of the Resist-Accept-Direct (RAD) framework. The intent of the paper is to provide scientists and land managers with key information and a forward-thinking framework for fuels science and adaptive management that can respond to both expected and unexpected changes in sagebrush rangelands.

Rangeland Ecology and Management↗

USGS2022

The effect of diagenesis and acetolysis on the preservation of morphology and ultrastructural features of pollen

Pollen morphology on its own and in conjunction with other characteristics has elucidated the origin and evolution of various plant groups. Previous studies of fossil pollen rarely discuss the effects of diagenesis and sample preparation on pollen characteristics, i.e., variability in staining, pollen morphology, and pollen wall ultrastructural characteristics. This paper examines the effect of acetolysis on reflectance and spectral epi-fluorescence measurements. Based on empirical studies, different species under similar experimental conditions display different reflectance values, indicating individual species respond differently to similar post-depositional thermal events. The quantitative pollen fluorescence spectra showed significant variability, but there is an overall increase in the mean wavelength of maximum emission with acetolysis. Increases in these spectral parameters are used to infer thermal maturation and diagenetic pathways in fossil pollen. The paper also discusses observations made on fossil pollen of a known thermal maturity using Pearson's Pollen/Spore Color Standard. Assessment of pollen thermal maturity using this color standard can be an indicator of the quality of morphological and ultrastructural information that can be extracted from fossil pollen. Increasing thermal maturity of pollen may have an effect on staining variability. Based on observations, staining for brightfield or electron microscopy in fossil pollen, although useful for improving contrast in the specimen, must be used with caution when interpreting pollen wall structure. Although single fossil pollen investigations are useful, replication of these studies on similar or the same specimens from the same locality or various localities will collectively provide more information for elucidation of the morphology and ultrastructure of the once living pollen, and is helpful in sorting out characteristics that may be artifacts from post-depositional diagenesis.

Review of Palaeobotany and Palynology↗

USGS2009

Summary of current radiometric calibration coefficients for Landsat MSS, TM, ETM+, and EO-1 ALI sensors

This paper provides a summary of the current equations and rescaling factors for converting calibrated Digital Numbers (DNs) to absolute units of at-sensor spectral radiance, Top-Of-Atmosphere (TOA) reflectance, and at-sensor brightness temperature. It tabulates the necessary constants for the Multispectral Scanner (MSS), Thematic Mapper (TM), Enhanced Thematic Mapper Plus (ETM+), and Advanced Land Imager (ALI) sensors. These conversions provide a basis for standardized comparison of data in a single scene or between images acquired on different dates or by different sensors. This paper forms a needed guide for Landsat data users who now have access to the entire Landsat archive at no cost.

Remote Sensing of Environment↗

USGS2014

Landsat-8: Science and product vision for terrestrial global change research

Landsat 8, a NASA and USGS collaboration, acquires global moderate-resolution measurements of the Earth's terrestrial and polar regions in the visible, near-infrared, short wave, and thermal infrared. Landsat 8 extends the remarkable 40 year Landsat record and has enhanced capabilities including new spectral bands in the blue and cirrus cloud-detection portion of the spectrum, two thermal bands, improved sensor signal-to-noise performance and associated improvements in radiometric resolution, and an improved duty cycle that allows collection of a significantly greater number of images per day. This paper introduces the current (2012–2017) Landsat Science Team's efforts to establish an initial understanding of Landsat 8 capabilities and the steps ahead in support of priorities identified by the team. Preliminary evaluation of Landsat 8 capabilities and identification of new science and applications opportunities are described with respect to calibration and radiometric characterization; surface reflectance; surface albedo; surface temperature, evapotranspiration and drought; agriculture; land cover, condition, disturbance and change; fresh and coastal water; and snow and ice. Insights into the development of derived ‘higher-level’ Landsat products are provided in recognition of the growing need for consistently processed, moderate spatial resolution, large area, long-term terrestrial data records for resource management and for climate and global change studies. The paper concludes with future prospects, emphasizing the opportunities for land imaging constellations by combining Landsat data with data collected from other international sensing systems, and consideration of successor Landsat mission requirements.

Remote Sensing of Environment↗

USGS2016

Mercury in western North America: A synthesis of environmental contamination, fluxes, bioaccumulation, and risk to fish and wildlife

Western North America is a region defined by extreme gradients in geomorphology and climate, which support a diverse array of ecological communities and natural resources. The region also has extreme gradients in mercury (Hg) contamination due to a broad distribution of inorganic Hg sources. These diverse Hg sources and a varied landscape create a unique and complex mosaic of ecological risk from Hg impairment associated with differential methylmercury (MeHg) production and bioaccumulation. Understanding the landscape-scale variation in the magnitude and relative importance of processes associated with Hg transport, methylation, and MeHg bioaccumulation requires a multidisciplinary synthesis that transcends small-scale variability. The Western North America Mercury Synthesis compiled, analyzed, and interpreted spatial and temporal patterns and drivers of Hg and MeHg in air, soil, vegetation, sediments, fish, and wildlife across western North America. This collaboration evaluated the potential risk from Hg to fish, and wildlife health, human exposure, and examined resource management activities that influenced the risk of Hg contamination. This paper integrates the key information presented across the individual papers that comprise the synthesis. The compiled information indicates that Hg contamination is widespread, but heterogeneous, across western North America. The storage and transport of inorganic Hg across landscape gradients are largely regulated by climate and land-cover factors such as plant productivity and precipitation. Importantly, there was a striking lack of concordance between pools and sources of inorganic Hg, and MeHg in aquatic food webs. Additionally, water management had a widespread influence on MeHg bioaccumulation in aquatic ecosystems, whereas mining impacts where relatively localized. These results highlight the decoupling of inorganic Hg sources with MeHg production and bioaccumulation. Together the findings indicate that developing efforts to control MeHg production in the West may be particularly beneficial for reducing food web exposure instead of efforts to simply control inorganic Hg sources.

Science of the Total Environment↗

USGS2024

Planning hydrological restoration of coastal wetlands: Key model considerations and solutions

The hydrological restoration of coastal wetlands is an emerging approach for mitigating and adapting to climate change and enhancing ecosystem services such as improved water quality and biodiversity. This paper synthesises current knowledge on selecting appropriate modelling approaches for hydrological restoration projects. The selection of a modelling approach is based on project-specific factors, such as costs, risks, and uncertainties, and aligns with the overall project objectives. We provide guidance on model selection, emphasising the use of simpler and less expensive modelling approaches when appropriate, and identifying situations when models may not be required for project managers to make informed decisions. This paper recognises and supports the widespread use of hydrological restoration in coastal wetlands by bridging the gap between hydrological science and restoration practices. It underscores the significance of project objectives, budget, and available data and offers decision-making frameworks, such as decision trees, to aid in matching modelling methods with specific project outcomes.

Science of the Total Environment↗

USGS2018

Examination of differences between three SPT-based seismic soil liquefaction triggering relationships

The preceding companion paper presented the updating of the seismic soil liquefaction triggering relationship of Cetin et al. [1], and compared the resulting updated relationship with the earlier version. In this second paper, a detailed cross-comparison is made between three triggering relationships: (1) Seed et al. [2], as slightly updated by the NCEER Working Group (Youd et al. [3]), (2) Boulanger and Idriss [4], and (3) Cetin et al. [5]. Differences between these three triggering relationships, and the apparent causes of them are examined. Also studied are the impacts of these differences on levels of conservatism with regard to evaluation of liquefaction triggering hazard, and the resulting risks for engineering projects.

Soil Dynamics and Earthquake Engineering↗

USGS2018

SPT-based probabilistic and deterministic assessment of seismic soil liquefaction triggering hazard

This study serves as an update to the Cetin et al. (2000, 2004) [1,2] databases and presents new liquefaction triggering curves. Compared with these studies from over a decade ago, the resulting new Standard Penetration Test (SPT)-based triggering curves have shifted to slightly higher CSR-levels for a given N1,60,CS for values of N1,60,CS greater than 15 blows/ft, but the correlation curves remain essentially unchanged at N1,60,CS values less than 15 blows/ft. This paper addresses the improved database and the methodologies used for the development of the updated triggering relationships. A companion paper addresses the principal issues that cause differences among three widely used SPT-based liquefaction triggering relationships.

Soil Dynamics and Earthquake Engineering↗

USGS2023

The 50-year Landsat collection 2 archive

The Landsat global consolidated data archive now exceeds 50 years. In recognition of the need for consistently processed data across the Landsat satellite series, the U.S. Geological Survey (USGS) initiated collection-based processing of the entire archive that was processed as Collection 1 in 2016. In preparation for the data from the now successfully launched Landsat 9, the USGS reprocessed the Landsat archive as Collection 2 in 2020. This paper describes the rationale for, and the contents and advancements provided by Collection 2, and highlights the differences between the Collection 1 and Collection 2 products. Notably, the Collection 2 products have improved geolocation and, for the first time, the USGS provides a global inventory of Level 2 surface reflectance and surface temperature products. Also for the first time, the USGS used a commercial cloud computing architecture to efficiently process the archive and enable direct cloud access of the Landsat products. The paper concludes with discussion of likely improvements expected in Collection 3 in preparation for the Landsat Next mission that is planned for launch in the early 2030s.

Science of Remote Sensing↗

USGS2000

Precipitation areal-reduction factor estimation using an annual-maxima centered approach

The adjustment of precipitation depth of a point storm to an effective (mean) depth over a watershed is important for characterizing rainfall-runoff relations and for cost-effective designs of hydraulic structures when design storms are considered. A design storm is the precipitation point depth having a specified duration and frequency (recurrence interval). Effective depths are often computed by multiplying point depths by areal-reduction factors (ARF). ARF range from 0 to 1, vary according to storm characteristics, such as recurrence interval; and are a function of watershed characteristics, such as watershed size, shape, and geographic location. This paper presents a new approach for estimating ARF and includes applications for the 1-day design storm in Austin, Dallas, and Houston, Texas. The approach, termed 'annual-maxima centered,' specifically considers the distribution of concurrent precipitation surrounding an annual-precipitation maxima, which is a feature not seen in other approaches. The approach does not require the prior spatial averaging of precipitation, explicit determination of spatial correlation coefficients, nor explicit definition of a representative area of a particular storm in the analysis. The annual-maxima centered approach was designed to exploit the wide availability of dense precipitation gauge data in many regions of the world. The approach produces ARF that decrease more rapidly than those from TP-29. Furthermore, the ARF from the approach decay rapidly with increasing recurrence interval of the annual-precipitation maxima. (C) 2000 Elsevier Science B.V.The adjustment of precipitation depth of a point storm to an effective (mean) depth over a watershed is important for characterizing rainfall-runoff relations and for cost-effective designs of hydraulic structures when design storms are considered. A design storm is the precipitation point depth having a specified duration and frequency (recurrence interval). Effective depths are often computed by multiplying point depths by areal-reduction factors (ARF). ARF range from 0 to 1, vary according to storm characteristics, such as recurrence interval; and are a function of watershed characteristics, such as watershed size, shape, and geographic location. This paper presents a new approach for estimating ARF and includes applications for the 1-day design storm in Austin, Dallas, and Houston, Texas. The approach, termed 'annual-maxima centered,' specifically considers the distribution of concurrent precipitation surrounding an annual-precipitation maxima, which is a feature not seen in other approaches. The approach does not require the prior spatial averaging of precipitation, explicit determination of spatial correlation coefficients, nor explicit definition of a representative area of a particular storm in the analysis. The annual-maxima centered approach was designed to exploit the wide availability of dense precipitation gauge data in many regions of the world. The approach produces ARF that decrease more rapidly than those from TP-29. Furthermore, the ARF from the approach decay rapidly with increasing recurrence interval of the annual-precipitation maxima.

Journal of Hydrology↗

USGS2000

Aquifer response to stream-stage and recharge variations. II. Convolution method and applications

In this second of two papers, analytical step-response functions, developed in the companion paper for several cases of transient hydraulic interaction between a fully penetrating stream and a confined, leaky, or water-table aquifer, are used in the convolution integral to calculate aquifer heads, streambank seepage rates, and bank storage that occur in response to streamstage fluctuations and basinwide recharge or evapotranspiration. Two computer programs developed on the basis of these step-response functions and the convolution integral are applied to the analysis of hydraulic interaction of two alluvial stream-aquifer systems in the northeastern and central United States. These applications demonstrate the utility of the analytical functions and computer programs for estimating aquifer and streambank hydraulic properties, recharge rates, streambank seepage rates, and bank storage. Analysis of the water-table aquifer adjacent to the Blackstone River in Massachusetts suggests that the very shallow depth of water table and associated thin unsaturated zone at the site cause the aquifer to behave like a confined aquifer (negligible specific yield). This finding is consistent with previous studies that have shown that the effective specific yield of an unconfined aquifer approaches zero when the capillary fringe, where sediment pores are saturated by tension, extends to land surface. Under this condition, the aquifer's response is determined by elastic storage only. Estimates of horizontal and vertical hydraulic conductivity, specific yield, specific storage, and recharge for a water-table aquifer adjacent to the Cedar River in eastern Iowa, determined by the use of analytical methods, are in close agreement with those estimated by use of a more complex, multilayer numerical model of the aquifer. Streambank leakance of the semipervious streambank materials also was estimated for the site. The streambank-leakance parameter may be considered to be a general (or lumped) parameter that accounts not only for the resistance of flow at the river-aquifer boundary, but also for the effects of partial penetration of the river and other near-stream flow phenomena not included in the theoretical development of the step-response functions.Analytical step-response functions, developed for several cases of transient hydraulic interaction between a fully penetrating stream and a confined, leaky, or water-table aquifer, are used in the convolution integral to calculate aquifer heads, streambank seepage rates, and bank storage that occur in response to stream-stage fluctuations and basinwide recharge or evapotranspiration. Two computer programs developed on the basis of these step-response functions and the convolution integral are applied to the analysis of hydraulic interaction of two alluvial stream-aquifer systems. These applications demonstrate the utility of the analytical functions and computer programs for estimating aquifer and streambank seepage rates and bank storage.

Journal of Hydrology↗

USGS2000

From safe yield to sustainable development of water resources - The Kansas experience

This paper presents a synthesis of water sustainability issues from the hydrologic perspective. It shows that safe yield is a flawed concept and that sustainability is an idea that is broadly used but perhaps not well understood. In general, the sustainable yield of an aquifer must be considerably less than recharge if adequate amounts of water are to be available to sustain both the quantity and quality of streams, springs, wetlands, and ground-water-dependent ecosystems. To ensure sustainability, it is imperative that water limits be established based on hydrologic principles of mass balance. To establish water-use policies and planning horizons, the transition curves of aquifer systems from ground-water storage depletion to induced recharge of surface water need to be developed. Present-day numerical models are capable of generating such transition curves. Several idealized examples of aquifer systems show how this could be done. Because of the complexity of natural systems and the uncertainties in characterizing them, the current philosophy underlying sustainable management of water resources is based on the interconnected systems approach and on adaptive management. Examples of water-resources management from Kansas illustrate some of these concepts in a real-world setting. Some of the hallmarks of Kansas water management are the formation of local ground-water management districts, the adoption of minimum streamflow standards, the use of modified safe-yield policies in some districts, the implementation of integrated resource planning by the City of Wichita, and the subbasin water-resources management program in potential problem areas. These are all appropriate steps toward sustainable development. The Kansas examples show that local decision-making is the best way to fully account for local variability in water management. However, it is imperative that public education and involvement be encouraged, so that system complexities and constraints are better understood and overly simplistic solutions avoided. (C) 2000 Elsevier Science B.V.This paper presents a synthesis of water sustainability issues from the hydrologic perspective. It shows that safe yield is a flawed concept and that sustainability is an idea that is broadly used but perhaps not well understood. In general, the sustainable yield of an aquifer must be considerably less than recharge if adequate amounts of water are to be available to sustain both the quantity and quality of streams, springs, wetlands, and ground-water-dependent ecosystems. To ensure sustainability, it is imperative that water limits be established based on hydrologic principles of mass balance. To establish water-use policies and planning horizons, the transition curves of aquifer systems from ground-water storage depletion to induced recharge of surface water need to be developed. Present-day numerical models are capable of generating such transition curves. Several idealized examples of aquifer systems show how this could be done. Because of the complexity of natural systems and the uncertainties in characterizing them, the current philosophy underlying sustainable management of water resources is based on the interconnected systems approach and on adaptive management. Examples of water-resources management from Kansas illustrate some of these concepts in a real-world setting. Some of the hallmarks of Kansas water management are the formation of local ground-water management districts, the adoption of minimum streamflow standards, the use of modified safe-yield policies in some districts, the implementation of integrated resource planning by the City of Wichita, and the subbasin water-resources management program in potential problem areas. These are all appropriate steps toward sustainable development. The Kansas examples show that local decision-making is the best way to fully account for local variability in water management. However, it is imperative that public education and involv

Journal of Hydrology↗

USGS2000

Methodology and application of combined watershed and ground-water models in Kansas

Increased irrigation in Kansas and other regions during the last several decades has caused serious water depletion, making the development of comprehensive strategies and tools to resolve such problems increasingly important. This paper makes the case for an intermediate complexity, quasi-distributed, comprehensive, large-watershed model, which falls between the fully distributed, physically based hydrological modeling system of the type of the SHE model and the lumped, conceptual rainfall-runoff modeling system of the type of the Stanford watershed model. This is achieved by integrating the quasi-distributed watershed model SWAT with the fully-distributed ground-water model MODFLOW. The advantage of this approach is the appreciably smaller input data requirements and the use of readily available data (compared to the fully distributed, physically based models), the statistical handling of watershed heterogeneities by employing the hydrologic-response-unit concept, and the significantly increased flexibility in handling stream-aquifer interactions, distributed well withdrawals, and multiple land uses. The mechanics of integrating the component watershed and ground-water models are outlined, and three real-world management applications of the integrated model from Kansas are briefly presented. Three different aspects of the integrated model are emphasized: (1) management applications of a Decision Support System for the integrated model (Rattlesnake Creek subbasin); (2) alternative conceptual models of spatial heterogeneity related to the presence or absence of an underlying aquifer with shallow or deep water table (Lower Republican River basin); and (3) the general nature of the integrated model linkage by employing a watershed simulator other than SWAT (Wet Walnut Creek basin). These applications demonstrate the practicality and versatility of this relatively simple and conceptually clear approach, making public acceptance of the integrated watershed modeling system much easier. This approach also enhances model calibration and thus the reliability of model results. (C) 2000 Elsevier Science B.V.Increased irrigation in Kansas and other regions during the last several decades has caused serious water depletion, making the development of comprehensive strategies and tools to resolve such problems increasingly important. This paper makes the case for an intermediate complexity, quasi-distributed, comprehensive, large-watershed model, which falls between the fully distributed, physically based hydrological modeling system of the type of the SHE model and the lumped, conceptual rainfall-runoff modeling system of the type of the Stanford watershed model. This is achieved by integrating the quasi-distributed watershed model SWAT with the fully-distributed ground-water model MODFLOW. The advantage of this approach is the appreciably smaller input data requirements and the use of readily available data (compared to the fully distributed, physically based models), the statistical handling of watershed heterogeneities by employing the hydrologic-response-unit concept, and the significantly increased flexibility in handling stream-aquifer interactions, distributed well withdrawals, and multiple land uses. The mechanics of integrating the component watershed and ground-water models are outlined, and three real-world management applications of the integrated model from Kansas are briefly presented. Three different aspects of the integrated model are emphasized: (1) management applications of a Decision Support System for the integrated model (Rattlesnake Creek subbasin); (2) alternative conceptual models of spatial heterogeneity related to the presence or absence of an underlying aquifer with shallow or deep water table (Lower Republican River basin); and (3) the general nature of the integrated model linkage by employing a watershed simulator other than SWAT (Wet Walnut Creek basin). These applications demonstrate the practicality and ve

Journal of Hydrology↗