USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ore Geology Reviews”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

830 records · Page 41Linked to original sources
USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗
USGS2026

Evaluating groundwater quality influences from oil field operations and other anthropogenic activities in an urban setting, Santa Fe Springs, California

Groundwater quality is often affected by anthropogenic activities in urban settings. This study examines groundwater quality in and around the Santa Fe Springs Oil Field in Los Angeles County, California, where oil and gas production commonly intersects with high density industrial, commercial and residential land uses. Utilizing a combination of new and historical data, we evaluated potential pathways that would allow for oil field formation fluids to migrate into groundwater and whether mixing may have occurred based on the distribution of groundwater and oil field formation fluid tracers in samples. Samples were analyzed for a wide array of constituents including volatile organic compounds, light hydrocarbons, major ions, and various isotopic compositions. Despite evidence of oil field infrastructure providing potential pathways of migration via uncemented annular spaces, casing breaches and historical disposal of oil field formation water in surface ponds, the distribution and occurrence of stable isotopes of water, chloride, boron, and total dissolved solids do not indicate mixing of oil field formation water and groundwater. However, methane isotopic signatures and the presence of heavier alkanes suggest gas from oil-bearing formations have migrated from depth via oil field well infrastructure. Volatile organic compound detections were mainly from manufactured compounds unrelated to oil and gas production, with a relatively limited number of petroleum hydrocarbons also detected. Volatile organic compounds were generally found in wells tapping shallow, modern aged groundwater, indicating anthropogenic activities occurring at or near land surface as the source. Study results suggest that while oil field infrastructure provides migration pathways for oil field formation fluids to be introduced into groundwater, urban land uses not related to oil and gas production are the primary drivers of groundwater quality degradation.

California↗
USGS2024

Iodine-129 in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho, 2021–22

Between the 1950s and 1980s, wastewater generated at the Idaho National Laboratory contained Iodine-129 ( 129 I); this wastewater was discharged directly into the eastern Snake River Plain (ESRP) aquifer through a deep disposal well, unlined infiltration ponds, or leaked from distribution systems below industrial facilities. During 2021–22, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy and the Idaho Department of Environmental Quality Idaho National Laboratory Oversight Program, collected groundwater samples from 64 monitoring wells in the ESRP aquifer, 6 of which are part of a multilevel monitoring system, to determine the concentration of 129 I in the groundwater. These samples were analyzed by accelerator mass spectrometry as part of a long-term ongoing study to track trends and occurrences of this carcinogenic, long-lived radionuclide in the environment. Concentrations ranged from slightly above the locally determined background concentration of 5.4×10 −6 picocuries per liter, to just below the U.S. Environmental Protection Agency’s maximum contaminant level of 1 picocurie per liter. Discharge of wastewater containing 129 I has been discontinued to the aquifer, and long-term trends from a subset (n=15) of sampled wells show decreasing 129 I concentrations over the last three decades. Concentrations of 129 I in groundwater from monitoring wells near facilities at the Idaho National Laboratory are affected by episodic recharge from an ephemeral surface-water source and by the fracture-flow dominated hydrologic regime in the ESRP aquifer. The spatially focused sampling effort has also identified a low-level 129 I plume that affects long-term water quality near and downgradient from the Advanced Test Reactor Complex in the southwestern part of the facility that had not been clearly defined in previous sampling efforts, although the definition of the plume is somewhat limited by available data.

Idaho↗
USGS2024

Framework for mapping liquefaction hazard–Targeted design ground motions

Liquefaction-induced ground failure poses substantial challenges to geotechnical earthquake engineering design. Current approaches for designing against liquefaction hazards, as specified in most seismic provisions, focus on estimating a liquefaction factor of safety ( 𝐹⁢𝑆𝐿 ) and typically characterize earthquake loading using design parameters based on probabilistic or deterministic ground motion levels. Because 𝐹⁢𝑆𝐿 is estimated deterministically, this basis of design neglects considerable uncertainties for estimating liquefaction triggering and its consequences and results in a lack of liquefaction-specific design criteria, particularly as structural design has advanced toward risk-targeted performance objectives. This study presents a framework for developing liquefaction-targeted design criteria based on a minimum acceptable return period of liquefaction, informed by probabilistic liquefaction hazard analysis (PLHA). PLHA quantifies annualized rates of liquefaction by considering contributions from (1) the full ground-motion probability space, and (2) uncertainties in liquefaction triggering using probabilistic models. PLHA is used in this study to characterize the current, effective return periods of 𝐹⁢𝑆𝐿 ( 𝑇𝑅,𝐹⁢𝑆 ) obtained from conventional liquefaction hazard analysis (CLHA) using uniform-hazard ground motions. 𝑇𝑅,𝐹⁢𝑆 is evaluated in a parametric study of nearly 100 sites throughout the conterminous United States. The results indicate large geographic variations in acceptable liquefaction hazard levels, with implied 𝑇𝑅,𝐹⁢𝑆 ranging between approximately 1,000 to 3,000 years. To address these inconsistencies without the computational demands of full PLHA, a framework is proposed for developing a liquefaction-targeted design peak ground acceleration, 𝑃⁢𝐺⁢𝐴𝐿 , for use in liquefaction models that result in consistent liquefaction design levels across all geographic locations. The mapped 𝑃⁢𝐺⁢𝐴𝐿 is shown to be somewhat sensitive to site-specific properties, and adjustment factors are developed and presented. The proposed 𝑃⁢𝐺⁢𝐴𝐿 mapping procedure produces 𝐹⁢𝑆𝐿 estimates that are consistent with those obtained from full PLHA at a target 𝑇𝑅,𝐹⁢𝑆 , providing a promising roadmap to incorporating PLHA concepts into current liquefaction design methods.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2026

A ground-motion model derived using a generalized mean rupture distance for large slab interface earthquakes

Source–station distance is a central input to ground‐motion models (GMMs) for predicting seismic shaking. GMM development uses distance metrics including the Joyner–Boore distance, which is the shortest distance from an observation point to the surface projection of the earthquake rupture, and R rup the shortest distance to the rupture in three dimensions. Thompson and Baltay (2018) proposed the generalized mean rupture distance R p to address observed near‐fault ground‐motion saturation. R p accounts for the contribution to the shaking of all parts of the rupture and provides a simple method for incorporating spatially variable slip. They used R p to develop a GMM for shallow crustal earthquakes, assuming uniform slip. Here, we investigate the improvement offered by an R p ‐based GMM for large subduction interface earthquakes by recalibrating the path term for a published GMM ( Parker et al. , 2022 ) using R p derived from distributed slip models (DSMs). Inspection of within‐event and total residuals indicates that the recalibrated model fits the data at least as well as an alternative in which the path term was recalibrated using R rup and the same dataset. Incorporating slip information in its entirety or trimming the DSM geometry is preferable to assuming uniform moment release on a prescribed model fault that extends beyond the actual ruptured area. R p tuned to minimize model uncertainty is closer to the maximum distance to rupture for peak ground velocity (PGV) than acceleration, possibly reflecting the contribution to high‐frequency shaking of slip on local asperities. However, when the moment is concentrated far from stations, PGV is fit adequately with R p closer to R rup ⁠ . Our results suggest incorporating slip‐derived moment release through R p could improve GMMs for slab interface events, especially if the implementation of R p ‐based models is refined using a larger dataset of earthquakes with greater geographic diversity to account for regional ground‐motion variations.

Seismological Research Letters↗
USGS2026

The potential impact of three-dimensional distributed slip models derived from real-time GNSS data on the performance of the ShakeAlert earthquake early warning system for slab interface earthquakes

The ShakeAlert® earthquake early warning (EEW) system is designed to warn users of imminent strong ground motion with sufficient time to take protective actions. ShakeAlert currently uses three algorithms to characterize the earthquake source. One estimates the location and magnitude using the first few seconds of the P wave and, while fast, tends to underestimate magnitude for M w 7.0+ earthquakes. A second estimates the location, orientation, length, and corresponding magnitude of a line source using observed peak ground acceleration and contributes primarily to M w 5.5+ earthquakes. The third infers earthquake magnitude from peak ground displacement measured using Global Navigation Satellite System (GNSS) data and offers nonsaturating magnitudes for M w 7.0+ earthquakes. Other EEW algorithms exist that infer temporally evolving spatially variable slip on a 3D fault surface from real‐time GNSS data, information that might enable more accurate and timely alerts in the event of large‐magnitude subduction interface earthquakes. Here, we evaluate the potential contribution of one such algorithm, BEFORES ( Minson et al. , 2014 ), to improve ShakeAlert performance through a simulated real‐time implementation of Bayesian evidence‐based fault orientation and real‐time earthquake slip (BEFORES) and other ShakeAlert algorithms using data for eight M w 7.6+ earthquakes. The test results demonstrate that BEFORES can produce well‐constrained and accurate magnitude estimates as soon as or sooner than other EEW algorithms, in turn enabling it to increase the amount of warning time users receive in many cases. However, with a modified Mercalli intensity (MMI) threshold of 3.5, which is commonly used for issuing alerts, BEFORES would tend to alert large geographic regions that did not feel strong shaking (MMI 6+). This effect can be mitigated using a higher alert threshold of MMI 4.5 without negative impact on the amount of warning time obtainable with BEFORES.

Bulletin of the Seismological Society of America↗
USGS2026

Detecting earthquakes in noisy real-time GNSS data with deep learning for improved PGD magnitude estimation

To disseminate accurate and useful warnings, earthquake early warning (EEW) systems must quickly determine the size and location of an earthquake to estimate expected shaking. Traditional seismic‐based algorithms tend to underestimate the true magnitudes of large earthquakes, a phenomenon known as magnitude saturation. This limitation motivated the recent inclusion of Global Navigation Satellite Systems (GNSS) data into the U.S. Geological Survey’s ShakeAlert EEW system with the Geodetic First Approximation of Size and Time (GFAST) algorithm because GNSS data do not saturate with large ground motions. However, the noise levels of GNSS data are very high compared with traditional seismic data, which obscures P ‐wave arrivals and can result in less accurate magnitude estimations if displacement amplitudes are low, such as for lower magnitude earthquakes or large source–station distances. In this study, we develop a deep‐learning model that detects earthquakes in GNSS data and use the Ridgecrest, California, earthquake sequence as a case study to demonstrate how the model could act as a filter to reduce the amount of low‐quality data that enters an algorithm like GFAST. To preserve our limited real earthquake data for model inference, we generated a training dataset composed of >700,000 synthetic displacement waveforms. We combined the synthetic waveforms with real‐time GNSS noise to produce realistically noisy training waveforms and then tested our model on additional synthetic data and performed inference using the real data that were held back. We discuss the performance of our trained model on both the unseen synthetic data and real inference data. Our model can be used to selectively filter only high‐quality data where an earthquake signal is observed for input into an algorithm like GFAST (outperforming a simple signal‐to‐noise ratio–based filter) to reduce the error in GFAST’s real‐time earthquake magnitude estimations.

California↗
USGS2025

Local, regional, and distal recordings of seismic unrest at Tau Island volcano, American Samoa

A seismic swarm near Taʻū Island, a volcanic island in eastern American Samoa, occurred from July to October 2022. The earliest unrest was noted as felt shaking reports in late July, and instrumentation varied in the beginning of the sequence as the U.S. Geological Survey (USGS) Hawaiian Volcano Observatory responded by installing temporary and then permanent seismometers to monitor the activity. This network variability made it difficult to characterize the earliest seismicity and contextualize the entire sequence to discriminate between an underlying tectonic or volcanic source. Here, we present results analyzing hydroacoustic detections from an International Monitoring System hydrophone array near Wake Island, 4500 km northwest of Taʻū Island volcano. Using least-squares beamforming analysis, we create a catalog of T-wave detections from the direction of Taʻū Island to track the earthquakes, some of which were located by the USGS National EarthquakeInformation Center. Both the rate and hydroacoustic pressures, which we interpret as a proxy for earthquake size, gradually increased from late July to August, peaking on August 19 (rate) and August 24 (size), before decreasing to background in late September. Minutes-long bursts of tremor were also contemporaneously recorded as local network data became avail-able on August 20. Tremor activity continued throughout the rest of August, peaking on August 25, before ending in earlySeptember. These tremor bursts were band-limited to ~ 1–5 Hz and recorded as S waves at a regional station on the island of Upolu in Samoa, 250 km to the west of Taʻū Island. Our results do not constrain the tremor locations, but comparisons of earthquake and tremor reduced displacements recorded locally and regionally suggest a deeper tremor source. We interpret the increase in earthquake size and rate, together with the occurrence, characteristics, and relative depth of the tremor to be the result of magmatic activity beneath Taʻū Island volcano.

American Samoa, Taʻū Island↗
USGS2025

An evaluation of the effects of different deicing salt application rates on three watersheds in Essex County, New York

The U.S. Geological Survey, in cooperation with the New York State Department of Transportation, evaluated the effects of different deicing salt application rates on surface water, groundwater, and highway runoff quality near State highways in northern New York. Three reaches of State highways were tested with different deicing treatments between October 2019 and November 2022: a salt-sand mixture (Treatment A), a salt mixture applied at a lower rate (Treatment B), and a control mixture consistent with typical deicing salt amounts and application rates. Data on pavement conditions and the quality of surface water, highway runoff, and groundwater were collected. Surface electromagnetic data were also collected. Surface-water and groundwater quality downgradient from the State highways were compared with water quality at upgradient locations. The percentage of snow or ice coverage was used to evaluate the effectiveness of the salt applications. This report provides an overview of the transport of deicing salt. The Treatment B watershed had deicing mixture applied more frequently than other highway reaches, which caused it to have the highest annual total chloride application. Despite differences in chloride application, flow-weighted mean chloride concentrations in highway runoff were comparable across treatments. Chloride concentrations were elevated in surface water and groundwater downgradient from highways relative to chloride concentrations upgradient from highways. A chloride mass balance, calculated for one treatment watershed, indicated that groundwater affected by legacy deicing practices may be contributing additional chloride to surface water. Spatial patterns from electromagnetic surveys show a shallow saline plume alongside the highway in that area. Differences in winter severity and pavement-surface conditions drove deicing salt applications in the treatment areas. This study found that several factors affect chloride loads in the watersheds, including variable winter conditions, adaptive snow and ice management, legacy management practices, and area-specific aquifer and groundwater conditions.

New York↗
USGS2026

Water use in Louisiana, 2020

The U.S. Geological Survey (USGS), in cooperation with the Louisiana Department of Transportation and Development, collected water-withdrawal and water-use data from a 2020 inventory of water withdrawals in Louisiana. In 2020, approximately 8,700 million gallons per day (Mgal/d) of water was withdrawn from groundwater and surface-water sources in Louisiana, which represented a 0.22-percent decrease from 2015. Total groundwater withdrawals were about 1,900 Mgal/d, an increase of 7.1 percent from 2015, and total surface-water withdrawals were about 6,800 Mgal/d, a decrease of 2.1 percent from 2015 to 2020. Total water withdrawals, in million gallons per day, in 2020 for the various categories of use were as follows: public supply, 720; industry, 2,100; power generation, 4,100; rural domestic, 39; livestock, 7.0; rice irrigation, 930; general irrigation, 250; and aquaculture, 590. From 2015 to 2020, Louisiana’s total withdrawals for public supply increased by 1.4 percent, industry decreased by 2.3 percent, power generation decreased by 4.9 percent, rural domestic decreased by 1.2 percent, livestock increased by 11 percent, rice irrigation increased by 13 percent, general irrigation increased by 12 percent, and aquaculture increased by 20 percent. About 51 percent (approximately 960 Mgal/d) of all groundwater withdrawn was from the Chicot aquifer system and 24 percent (approximately 450 Mgal/d) was withdrawn from the Mississippi River alluvial aquifer. Since 2015, withdrawals from the Chicot aquifer system increased by 13 percent, and withdrawals from the Mississippi River alluvial aquifer increased by 18 percent. About 72 percent (4,900 Mgal/d) of all surface water withdrawn was from the Mississippi River main stem. This value represents a 1.1-percent decrease in withdrawals from 2015 to 2020. All water-withdrawal and water-use data presented in this report should be considered estimates. Because of rounding, totals and percentages presented in the tables, figures, and text in the report may differ slightly from totals or percentages calculated individually.

Louisiana↗
USGS2024

Global variability of the composition and temperature at the 410-km discontinuity from receiver function analysis of dense arrays

Seismic boundaries caused by phase transitions between olivine polymorphs in Earth's mantle provide thermal and compositional markers that inform mantle dynamics. Seismic studies of the mantle transition zone often use either global averaging with sparse arrays or regional sampling from a single dense array. The intermediate approach of this study utilizes many densely spaced seismic arrays distributed around the globe. We systematically compute teleseismic P-to-S receiver functions for each seismic array and invert for the 1-D seismic velocity structure of the mantle transition zone beneath each array to facilitate a comparison between densely sampled regions. We stack 3,600 receiver functions on average at 67 arrays in total. The stack is used in a probabilistic inversion to estimate the mantle transition zone interface depths and velocities beneath each array. We focus on the 410-km discontinuity (410) because it is a prominent seismic interface that is clearly linked to a single mineral phase transition between olivine and wadsleyite. The depths and velocity contrasts of the 410 are mapped to temperatures and compositions using mineral physics constraints. The depth of the 410 ranges from ∼405–440 km, which is consistent with a ∼360 K temperature range in a dry mantle and a ∼260 K temperature range in a wet mantle (2 wt. % water). The Vs contrast across the 410 ranges from ∼2.5–8 %, which is consistent with ∼20–70 vol. % olivine composition in a dry mantle and ∼25–80 vol. % in a wet mantle. The bulk composition of the upper mantle near the 410-km discontinuity is typically considered to be well-mixed because there is no thermodynamic impediment to convection at the olivine to wadsleyite phase transition. However, the wide range of inferred olivine content from our study suggests that there are large lateral variations in the bulk composition of the upper mantle near the 410-km discontinuity.

Earth and Planetary Science Letters↗
USGS2024

Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse

Produced water (i.e., a mixture of returned injection fluids and geologic formation brines) represents the largest volumetric waste stream associated with petroleum production in the United States. As such, produced water has been the focus of intense study with emphasis on understanding the geologic origin of the fluids, environmental impacts of unintended or intentional release, disposal concerns, and their commodity (e.g., lithium) potential. However, produced water geochemistry from many active petroleum plays remain poorly constrained leading to knowledge gaps associated with the origin of brine salinity and parameters (e.g., radium levels) that can impact treatment, disposal, and possible reuse. Here we evaluate the major ion geochemistry, radium concentrations, and stable water isotope composition of ~120 produced water samples collected from 17 producing unconventional petroleum wells in Weld County, Colorado from the Late Cretaceous Niobrara Formation. This sample set encompasses eight produced water time series from four new wells across production days 0 to ~365 and from four established wells across production days ~1000 to ~1700. Additionally, produced water from nine other established Niobrara Formation wells were sampled at discrete time points ranging from day 458 to day 2256, as well as hydraulic fracturing input fluids. These results expand the available Niobrara Formation produced water geochemical data, previously limited to few wells sampled within the first year of production, allowing for the heterogeneity of major ions and radium to be evaluated. Furthermore, we explore the geochemical relationships between major ion ratios and stable water isotope composition to understand the origin of salinity in Niobrara Formation brines from the Denver-Julesburg Basin. These findings are discussed with perspective toward potential treatment and reuse of Niobrara produced water prior to disposal.

Colorado, Nebraska, Wyoming↗
USGS2024

Prediction of regional broadband strong ground motions using a teleseismic source model of the 18 April 2014 Mw 7.3 Papanoa, Mexico, earthquake

To estimate predicted ground motion from a teleseismic slip model, we use a low‐ and high‐frequency hybrid method to simulate the regional, strong ground motions observed following the 18 April 2014 moment magnitude ( ⁠M w ⁠ ) 7.3 Papanoa, Mexico, earthquake. To generate the regional ground motion at low frequencies (<1 Hz), a teleseismically derived, finite‐fault, kinematic model is used to define the earthquake source, taking into account slip‐model variations identified with a parameter sampling approach that considers possible errors in the fault geometry, the hypocenter depth, and the rupture velocity. A 3D crustal model is used to calculate the low‐frequency ground motions using a finite‐element calculation that includes topography and considers variations in the source model to estimate the uncertainty in the calculations. High frequencies (>1 Hz) are added using a 1D full‐wave propagation code that estimates uncertainties by considering multiple random distributions of slip with different spatial correlation lengths. The synthetic, broadband (0.05–10.0 Hz) ground motions are obtained by combining the low‐ and high‐frequency portions match filtered at 1 Hz. These synthetic ground motions are compared with the regional observations using velocity records, peak ground acceleration, and medians of the orientation‐independent response spectra of the horizontal components (RotD50) calculated at periods of 0.2, 0.3, 0.5, 1.0, 2.0, 3.0, 5.0, 7.5, and 10.0 s. The results indicate that ground motions estimated at these periods using our hybrid approach based primarily on a teleseismically derived source model are comparable to the values observed for the 2014 Papanoa earthquake at regional distances. The approach could be used to estimate strong‐motion spectral levels expected for regions with limited local and regional recordings and could also fill in magnitude or distance gaps in ground‐motion prediction relations utilized in the assessment of seismic hazard.

Papanoa↗
USGS2026

Groundwater drought in the United States: Spatial and temporal variability

Many communities and ecosystems in the United States that are dependent on groundwater are potentially adversely affected by groundwater drought. We computed yearly groundwater-drought metrics and mean groundwater levels at well locations across the conterminous United States (CONUS), using data from wells and remotely sensed and modeled Gravity Recovery and Climate Experiment Drought Monitor Data Assimilation (GRACE-DADM). We also modeled the probability of low or high human impact at each well location. The spatial distribution of groundwater-drought duration and severity from 2001 to 2020 for 1,510 wells shows longer maximum duration and higher maximum severity events in drier regions like the Southwest than in wetter regions like the Northeast. Based on 613 wells in CONUS from 1981 to 2020, there are many significant decreases in drought duration and severity in the Northeast and many significant increases in annual-mean groundwater levels. In contrast, there are many significant increases in drought metrics and decreases in mean water levels in parts of the Southeast. There are major differences in trends from 2001 to 2020 between well-based and GRACE-DADM-based groundwater metrics in some CONUS regions and a very low correlation between trends at individual locations across CONUS. A potential reason for this disparity is the low GRACE-DADM resolution (∼12 km) and the potential for a large amount of groundwater variation at the local scale. Also, GRACE-DADM represents shallow, unconfined aquifers which may not match the screened interval of the monitoring wells we evaluated. Large spatial gaps in long-term, high frequency, and quality-assured groundwater-well monitoring data present a challenge for understanding groundwater-drought variability across CONUS. Remote sensing tools such as GRACE can help but cannot fully replace well monitoring, as highlighted by our study results. Substantially more long-term monitoring wells would more accurately represent groundwater-drought trends and spatial variability across CONUS, particularly in western regions.

conterminous United States↗
USGS2024

Coastal Science Navigator companion guide—Discover the U.S. Geological Survey coastal science products you need

The Coastal Science Navigator is an online gateway to a wide variety of U.S. Geological Survey (USGS) coastal change hazards-related information, data, and tools relevant to stakeholders’ scientific and decision-making needs. The products within the Coastal Science Navigator provide data related to past, present, and future threats to our coastlines. The filter search allows users to see all available products and identify relevant options by time scale, geographic scope, coastal hazard theme, and other filters. The guided search suggests products based on users’ answers to a short series of questions. A comprehensive summary is available for each product. The idea for the Coastal Science Navigator arose in 2020 in response to stakeholder feedback identifying the need for a central source for USGS coastal science information. It was published in July 2023 and initially included 55 products. Regular updates are planned to integrate other existing and new products. This guide introduces some of the many coastal change hazards-related products available through the USGS. In it, we showcase the products included in the Coastal Science Navigator’s initial publication in July 2023. While it is not representative of all the information, tools, and data available, we hope it serves as a compelling snapshot of what the USGS has to offer and encourages you to explore the Coastal Science Navigator to discover more of the products you need. To navigate this guide, the products have been organized by the time scale they are best suited for—past, present, or future—although many products cover multiple time scales. An additional section features software, one of the many product types available as filters within the Coastal Science Navigator. Other products include downloadable data, websites, and geonarratives (web pages that combine text, images, and interactive maps into narratives you can scroll through). Featured geographic scopes are also highlighted within this guide, detailing some of the many regions in which the USGS conducts research and illustrating another way to filter products within the Coastal Science Navigator.

Circular↗
USGS2025

Magnitude, depth and methodological variations of spectral stress drop within the SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest Earthquake Sequence

We present the first ensemble analysis of the 56 different sets of results submitted to the ongoing Community Stress Drop Validation Study using the 2019 Ridgecrest, California, earthquake sequence. Different assumptions and methods result in different estimation of the source contribution to recorded seismograms, and hence to the source parameters (principally corner frequency, f c ⁠ , spectral stress drop, Δσ, and seismic moment, M 0 ⁠ ) obtained from modeling calculated source spectra. For earthquakes smaller than magnitude (M) 2.5 there is negligible correlation between the f c values obtained by different studies, implying that no present method is reliable using available data. For larger magnitude events, correlation between f c measurements of different studies, within even a small M range is always higher than spectral ⁠Δσ , because the f c measurements simply reflect the underlying physical decrease in f c with increasing M. We model the observed trends of submitted f c with both magnitude and depth. Most methods report an increase in spectral Δσ with M, although a magnitude‐invariant spectral Δσ is within the confidence limits. The depth dependence is smaller and depends on whether a study allows attenuation to vary with source depth; a combination of depth‐dependent attenuation correction, and depth‐dependent shear‐wave velocity can compensate for reported depth trends. We model the submitted values to remove differing M and depth variation to investigate the relative interevent variability. We find consistent relative variation between individual events, and also lower relative spectral Δσ in the northwest of the aftershock sequence, and higher on the cross fault and in the region of main fault intersection. This large‐scale comparison implies that absolute spectral Δσ estimates are dependent on the methods used; studies of different regions or using different methods should not be directly compared and improved constraints on path and site corrections are needed to resolve these absolute spectral Δσ differences.

California↗
USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗
USGS2024

Environmental monitoring of groundwater, surface water, and soil at the Ammonium Perchlorate Rocket Motor Destruction Facility at the Letterkenny Army Depot, Chambersburg, Pennsylvania, 2021

Letterkenny Army Depot in Chambersburg, Pennsylvania, built an Ammonium Perchlorate Rocket Motor Destruction (ARMD) Facility in 2016 to centralize rocket motor destruction and contain all waste during the destruction process. The U.S. Geological Survey has collected environmental samples from groundwater, surface water, and soils at ARMD since 2016. During 2021, samples were collected from four groundwater wells in September, one surface-water site in October, and five soil sites in November near the facility. Samples were analyzed for nutrients, trace metals, major ions, total volatile organic compounds, and perchlorate. Perchlorate was not detected in any 2021 samples. Groundwater results showed no constituents exceeded any U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL). Dissolved arsenic (As) was detected in one well above the reporting detection level (RDL) of 3 micrograms per liter (μg/L) at 5.4 μg/L but below its MCL of 10 μg/L. Dissolved iron (Fe) was the only inorganic constituent measured above an EPA secondary maximum contaminant level (SMCL). All groundwater samples collected in 2021 exceeded the Fe SMCL of 300 μg/L, with concentrations ranging from 390 μg/L to 3,500 μg/L. Surface-water data collected during 2021 showed no measured constituents in the surface-water sample that exceeded any EPA MCL or SMCL. Soil samples collected from 2016 through 2021 showed all concentrations of As exceeded the EPA soil screening levels of 3 milligrams per kilogram (mg/kg) but did not exceed the Pennsylvania medium-specific concentrations for As of 61 mg/kg. Arsenic concentrations in 2021 ranged from 9.1 mg/kg to 12.9 mg/kg. The 2021 results for the ARMD Facility indicate no increases in concentrations of reported compounds compared to data from 2016 to 2020. The contained burn treatment facility for demilitarization of rocket motors during 2021 appears to have operated without elevating concentrations of target compounds compared to previous years.

Pennsylvania↗