SEARCH · USGS Science

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

USGS1996

The roles of organic matter in the formation of uranium deposits in sedimentary rocks

Because reduced uranium species have a much smaller solubility than oxidized uranium species and because of the strong association of organic matter (a powerful reductant) with many uranium ores, reduction has long been considered to be the precipitation mechanism for many types of uranium deposits. Organic matter may also be involved in the alterations in and around tabular uranium deposits, including dolomite precipitation, formation of silicified layers, iron-titanium oxide destruction, dissolution of quartz grains, and precipitation of clay minerals. The diagenetic processes that produced these alterations also consumed organic matter. Consequently, those tabular deposits that underwent the more advanced stages of diagenesis, including methanogenesis and organic acid generation, display the greatest range of alterations and contain the smallest amount of organic matter. Because of certain similarities between tabular uranium deposits and Precambrian unconformity-related deposits, some of the same processes might have been involved in the genesis of Precambrian unconformity-related deposits. Hydrologic studies place important constraints on genetic models of various types of uranium deposits. In roll-front deposits, oxidized waters carried uranium to reductants (organic matter and pyrite derived from sulfate reduction by organic matter). After these reductants were oxidized at any point in the host sandstone, uranium minerals were reoxidized and transported further down the flow path to react with additional reductants. In this manner, the uranium ore migrated through the sandstone at a rate slower than the mineralizing ground water. In the case of tabular uranium deposits, the recharge of surface water into the ground water during flooding of lakes carried soluble humic material to the water table or to an interface where humate precipitated in tabular layers. These humate layers then established the chemical conditions for mineralization and related alterations. In the case of Precambrian unconformity-related deposits, free thermal convection in the thick sandstones overlying the basement rocks carried uranium to concentrations of organic matter in the basement rocks.

Ore Geology Reviews↗

USGS1988

Nitrogen cycling between sediment and the shallow-water column in the transition zone of the Potomac River and estuary. I. Nitrate and ammonium fluxes

A three-year study of seasonal variation in water-column and sediment nitrogen species was conducted in the transition zone of the Potomac River 35 m from the Virginia shore at a site with an average water-column depth of approximately 1 m over sandy sediment. A diffusion-controlled sampler was used to collect water samples from the water column, at the interface between the water column and sediment, and at several tens of centimeters into the sediment. Nitrate was the predominant dissolved nitrogen species in the water column. The importance of denitrification was inferred by nitrate fluxes which were directed into the sediment from the water column during approximately 75% of the sampling periods and ranged from 0·02 to 0·69 mmol m −2 day −1 . Flux of nitrate from the sediment into the water column, ⩾0·1 mmol m −2 day −1 , due possibly to nitrification in surficial sediment, occurred during one spring and two summer sampling periods. Ammonium fluxes were less than 0·1 mmol m −2 day −1 during 90% of the sampling periods. Of the ammonium fluxes that were >0·05 mmol m −2 day −1 , all were fluxes into the sediment during sampling periods when sediment resuspension occurred, and all were into the water column during periods of calm. The mean value of ammonium flux (0·005 ± 0·05 mmol m −2 day −1 ) from the sandy, shallow-water sediments was two orders of magnitude less than the ammonium fluxes from the deeper, silty channel sediments in the same reach of the river. Diffusive flux calculations suggest that approximately one order of magnitude more nitrate than ammonium is cycled between the shallow-water column and the sandy sediment in the transition zone of the Potomac River.

Maryland, Virginia↗

USGS1989

Nitrogen cycling between sediment and the shallow-water column in the transition zone of the Potomac River and Estuary. II. The role of wind-driven resuspension and adsorbed ammonium

During periods of sediment resuspension, desorption of ammonium from sediment solids can be the major pathway for enriching the water column with the ammonium that is produced by bacterial degradation of organic matter in the bottom material. This hyopthesis is based on a three-year study of diffusive flux in the transition zone of the Potomac River at a site 35 m from the Virginia shore where the average water-column depth is approximately 1 m over sandy sediment. A diffusion-controlled sampler was used to collect water samples at the interface between the water column and sediment and at several tens of centimeters into the sediment. Interstitial water concentration gradients showed that diffusive flux of ammonium from the sandy shallow-water sediments was approximately 1% of the diffusive flux of ammonium from the silty channel sediments in the same zone of the Potomac River. Organic nitrogen and bound or adsorbed ammonium were the predominant nitrogen forms in the sediment. Adsorbed ammonium concentrations ranged from nondetectable to 3·7 μmol g −1 of sediment. Concentrations of adsorbed ammonium per gram of sediment were one to three orders of magnitude more than interstitial water ammonium concentrations. Desorption of ammonium from sediment solids appeared to be the controlling factor in the degree of water-column ammonium enrichment. In laboratory experiments that simulated sediment resuspension, 40–80% of the adsorbed ammonium predicted to desorb did so after approximately 30 min of mixing. Based on calculations for 1 m 2 to a depth of 4 cm, one resuspenion event lasting minutes could mix more ammonium into the water column from desorption of ammonium from sediment solids than could be delivered to the water column by diffusive flux from shallow-water sediments in 10–1000 days and would be comparable to enrichment by ammonium diffusive flux for 5–50 days from channel sediments in the same river zone.

Maryland, Virginia↗

USGS1983

Distribution of submersed aquatic macrophytes in the tidal Potomac River

Results of a 3-year survey (1978?1980) and review of historic trends have shown a major decline in the number of species and the distribution of submersed aquatic macrophytes in the tidal Potomac River since the early 1900's. The freshwater tidal river is essentially devoid of plants and only very sparse populations remain in the mesohaline section of the estuary. Present plant populations are largely confined to the transition-zone region where salinity instability at the fresh-to-brackish water interface is believed to reduce biotic stress on submersed vegetation. Many factors may be implicated in the loss of vegetation over major regions of the tidal Potomac River; however, long-term conditions of excessive nutrients appear to be primarily responsible for the present distribution.

Aquatic Botany↗

USGS1984

Production induced boiling and cold water entry in the Cerro Prieto geothermal reservoir indicated by chemical and physical measurements

Chemical and physical data suggest that the relatively shallow, western part of the Cerro Prieto reservoir is bounded below by low permeability rocks, and above and at the sides by an interface with cooler water. There is no continuous permeability barrier around or immediately above the reservoir. Permeability within the reservoir is dominantly intergranular. Mixture with cooler water rather than boiling is the dominant cooling process in the natural state, and production causes displacement of hot water by cooler water, not by vapour. Local boiling occurs near most wells in response to pressure decreases, but no general vapour zone has formed. ?? 1984.

Geothermics↗

USGS1993

The hydrogeology of Kilauea volcano

The hydrogeology of Kilauea volcano and adjacent areas has been studied since the turn of this century. However, most studies to date have focused on the relatively shallow, low-salinity parts of the ground-water system, and the deeper hydrothermal system remains poorly understood. The rift zones of adjacent Mauna Loa volcano bound the regional ground-water flow system that includes Kilauea, and the area bounded by the rift zones of Kilauea and the ocean may comprise a partly isolated subsystem. Rates of ground-water recharge vary greatly over the area and discharge is difficult to measure, because streams are ephemeral and most ground-water discharges diffusely at or below sea level. Hydrothermal systems exist at depth in Kilauea's cast and southwest rift zone, as evidenced by thermal springs at the coast and wells in the lower east-rift zone. Available data suggest that dike-impounded, heated ground water occurs at relatively high elevations in the upper east-and southwest-rift zones of Kilauea, and that permeability at depth in the rift zones (probably < 10-15 m2) is much lower than that of unaltered basalt flows closer to the surface (> 10 10 m2). Substantial variations in permeability and the presence of magmatic heat sources influence the structure of the fresh water-salt water interface, so the Ghyben-Herzberg model will often fail to predict its position. Numerical modeling studies have considered only subsets of the hydrothermal system, because no existing computer code solves the coupled fluid-flow, heat- and solute-transport problem over the temperature and salinity range encountered at Kilauea. ?? 1993.

Geothermics↗

USGS1979

Uranium transport in the Walker River Basin, California and Nevada

During the summer of 1976 waters from tributaries, rivers, springs and wells were sampled in the Walker River Basin. Snow and sediments from selected sites were also sampled. All samples were analyzed for uranium and other elements. The resulting data provide an understanding of the transport of uranium within a closed hydrologic basin as well as providing a basis for the design of geochemical reconnaissance studies for the Basin and Range Province of the Western United States. Spring and tributary data are useful in locating areas containing anomalous concentrations of uranium. However, agricultural practices obscure the presence of known uranium deposits and render impossible the detection of other known deposits. Uranium is extremely mobile in stream waters and does not appear to sorb or precipitate. Uranium has a long residence time (2500 years) in the open waters of Walker Lake; however, once it crosses the sediment-water interface, it is reduced to the U(IV) state and is lost from solution. Over the past two million years the amount of uranium transported to the terminal point of the Walker River system may have been on the order of 4 × 10 8 kg . This suggests that closed basin termini are sites for significant uranium accumulations and are, therefore, potential sites of uranium ore deposits.

Journal of Geochemical Exploration↗

USGS1982

Guidelines for finding concretionary Mn-Fe oxides in streams

Concretionary Mn-Fe oxides in streams form at interfaces between oxidizing and reducing environments. A reducing environment produces waters high in dissolved Mn and Fe, and an oxidizing environment causes precipitation. Mineralogical, microprobe, and optical studies of concretionary Mn-Fe oxides may further our understanding of the role of Mn-Fe oxides in determining the trace-element geochemistry of stream sediments.

Journal of Geochemical Exploration↗

USGS1991

Fluid inclusion gas chemistry as a potential minerals exploration tool: Case studies from Creede, CO, Jerritt Canyon, NV, Coeur d'Alene district, ID and MT, southern Alaska mesothermal veins, and mid-continent MVT's

Recent advances in instrumentation now permit quantitative analysis of gas species from individual fluid inclusions. Fluid inclusion gas data can be applied to minerals exploration empirically to establish chemical (gas composition) signatures of the ore fluids, and conceptually through the development of genetic models of ore formation from a framework of integrated geologic, geochemical, and isotopic investigations. Case studies of fluid inclusion gas chemistry from ore deposits representing a spectrum of ore-forming processes and environments are presented to illustrate both the empirical and conceptual approaches. We consider epithermal silver-gold deposits of Creede, Colorado, Carlin-type sediment-hosted disseminated gold deposits of Jerritt Canyon, Nevada, metamorphic silver-base-metal veins of the Coeur d'Alene district, Idaho and Montana, gold-quartz veins in accreted terranes of southern Alaska, and the mid-continent base-metal sulfide deposits of Mississippi Valley-Type (MVT's). Variations in gas chemistry determine the redox state of the ore fluids, provide compositional input for gas geothermometers, characterize ore fluid chemistry (e.g., CH 4 CO 2 , H 2 SSO 2 , CO 2 /H 2 S, organic-rich fluids, gas-rich and gas-poor fluids), identify magmatic, meteoric, metamorphic, shallow and deep basin fluids in ore systems, locate upwelling plumes of magmatic-derived volatiles, zones of boiling and volatile separation, interfaces between contrasting fluids, and important zones of fluid mixing. Present techniques are immediately applicable to exploration programsas empirical studies that monitor fluid inclusion gas threshold concentration levels, presence or absence of certain gases, or changes in gas ratios. We suggest that the greater contribution of fluid inclusion gas analysis is in the integrated and comprehensive chemical dimension that gas data impart to genetic models, and in the exploration concepts based on processes and environments of ore formation derived from these genetic models.

Journal of Geochemical Exploration↗

USGS1986

Role of aquitards in hydrogeochemical systems: A synopsis

Aquitards exert significant influence on the hydrogeochemistry of aquifer systems. This influence is manifested somewhat differently depending on the relative position of aquitards within a system. In the deeper regimes, they are influential in the origin and distribution of brines and the development of geopressured zones. In intermediate regimes, they form multi-layered aquifer systems and provide a source of reactive minerals and exchangeable ions. In shallow regimes, aquitards can influence the topography and drainage patterns; this influences the relationship between the water table and the potentiometric surface of confined aquifers, controls the rates of infiltration and discharge, and controls whether the geochemical system is open or closed to exchange of carbon dioxide gas. In coastal areas, aquitards can determine the depth of the saltwater-freshwater interface, its distance from the shoreline, and the position of the mixing zone that causes geochemical alteration of minerals and development of porosity. ?? 1986.

Applied Geochemistry↗

USGS1991

Radon-222 and its parent radionuclides in groundwater from two study areas in New Jersey and Maryland, U.S.A.

A study of groundwater chemistry and radionuclide mobility in New Jersey and Maryland was conducted to investigate natural processes that control the mobility of radionuclides in the water-rock system. Groundwater was sampled from two geological units in New Jersey and from six in Maryland. The water sampled was from aquifiers in fractured metamorphic rocks of varying composition and metamorphic grade. In both areas, groundwater chemistry was affected most by aquifier mineralogy and lithology; concentrations of total dissolved U, 226Ra and 222Rn were similarly affected. In evey sample for which measurements were made, dissolved Utotal and 226Ra were present in much lower concentrations than 222Rn when expressed in terms of their radioactivity. On the other hand, the total amount of 222Rn that could be produced in these rocks, given their U contents, is much higher than the concentrations observed in groundwater. Thus, the emanating efficiencies of the aquifer rocks studied must be near 10% or less. Such low emanating efficiencies require that a fraction of the 226Ra in the rock be located close to the water-rock interface so that 222Rn, when produced, can be rapidly and efficiently transferred to the aqueous phase. This condition is established when a similar fraction of the U is in a readily leachable position. No known U or Ra solids were supersaturated in any of the samples. Thus, adsorption processes probably play a role in limiting mobilities of Utotal and 226Ra. Concentrations of Utotal and 226Ra found in the water samples are comparable to those found in experimental studies of adsorption onto mineral surfaces. ?? 1991.

Maryland, New Jersey↗

USGS1992

Gypsum accumulation on carbonate stone

The accumulation of gypsum on carbonate stone has been investigated through exposure of fresh samples of limestone and marble at monitored sites, through examination of alteration crusts from old buildings and through laboratory experiments. Several factors contribute to gypsum accumulation on carbonate stone. Marble or limestone that is sheltered from direct washing by rain in an urban environment with elevated pollution levels is likely to accumulate a gypsum crust. Crust development may be enhanced if the stone is porous or has an irregular surface area. Gypsum crusts are a surficial alteration feature; gypsum crystals form at the pore opening-air interface, where evaporation is greatest.

Conference Paper↗

USGS1993

Aquatic photolysis: photolytic redox reactions between goethite and adsorbed organic acids in aqueous solutions

Photolysis of mono and di-carboxylic acids that are adsorbed onto the surface of the iron oxyhydroxide (goethite) results in an oxidation of the organic material and a reduction from Fe(III) to Fe(II) in the iron complex. There is a subsequent release of Fe2+ ions into solution. At constant light flux and constant solution light absorption, the factors responsible for the degree of photolytic reaction include: the number of lattice sites that are bonded by the organic acid; the rate of acid readsorption to the surface during photolysis; the conformation and structure of the organic acid; the degree of oxidation of the organic acid; the presence or absence of an ??-hydroxy group on the acid, the number of carbons in the di-acid chain and the conformation of the di-acid. The ability to liberate Fe(III) at pH 6.5 from the geothite lattice is described by the lyotropic series: tartrate>citrate> oxalate > glycolate > maleate > succinate > formate > fumarate > malonate > glutarate > benzoate = butanoate = control. Although a larger amount of iron is liberated, the series is almost the same at pH 5.5 except that oxalate > citrate and succinate > maleate. A set of rate equations are given that describe the release of iron from the goethite lattice. It was observed that the pH of the solution increases during photolysis if the solutions are not buffered. There is evidence to suggest the primary mechanism for all these reactions is an electron transfer from the organic ligand to the Fe(III) in the complex. Of all the iron-oxyhydroxide materials, crystalline goethite is the least soluble in water; yet, this study indicates that in an aqueous suspension, iron can be liberated from the goethite lattice. Further, it has been shown that photolysis can occur in a multiphase system at the sediment- water interface which results in an oxidation of the organic species and release of Fe2+ to solution where it becomes available for further reaction. ?? 1993.

Journal of Photochemistry and Photobiology A: Chem↗

USGS2021

Soils and paleosols

Soils are naturally occurring bodies that form in the interface between the geosphere, biosphere, hydrosphere , and atmosphere. They are the medium for much of the Earth's plant and animal growth. Soil morphology and how it evolves are functions of the soil-forming factors of climate, organisms, relief, parent material, and time. The expression of soil morphology takes the form of layers, called horizons, that differ in their color, particle size distribution, structure, chemistry, and organic matter content from the parent material. A fundamental soil mapping unit in the USA is the soil order and 12 soil orders have been defined on the basis of soil morphology, physical and chemical properties, and climate. Soil geography in the USA is explained by an examination of how these 12 soil orders are found in particular climates, under specific vegetation communities, how they develop from compositionally distinct parent materials, or how they are a result of the age of soil parent material. Paleosols are ancient soils, those that formed in the past. Three types of paleosols are recognized, buried soils (those covered by a younger sediment or rock), exhumed paleosols (formerly buried soils that are now exposed at the surface due to erosion of overlying materials), and relict paleosols (soils that occur at the land surface, but which formed in an environment, such as a climate or biome, very different from that at the present time). Paleosols can help define geologic contacts and can aid in elucidating past climates or vegetation regimes. Although there are rich geologic records of paleosols in the Quaternary, there is an increasing recognition of the importance of all these features in the longer, pre-Quaternary geologic record.

Book chapter↗

USGS2022

Applied aspects of locomotion and biomechanics

Locomotion is the act and process of moving from place to place, which is fundamental to the life history of all mobile organisms. While the field of biomechanics encompasses the study of the physical constraints of what animals are capable of, ecological contexts require an integrated view that includes ecology and behavior. This chapter provides an overview of some of the areas where locomotion and biomechanics of fish movement interface with the rapidly evolving changes that humans impose on aquatic environments. These changes include fundamental alterations to the environment such as altered flows, fragmentation of riverine habitats, and invasive species, but also direct interactions that occur with capture fisheries. We explore each of these areas, considering both challenges and opportunities informed by the study of locomotion and biomechanics, emphasizing how this field can contribute to conservation of fishes in the Anthropocene. We then turn to technology, where important advances are aiding in our understanding of fish movement. In some cases those advances have themselves led to novel technologies, where biomimetic robots and related devices offer novel opportunities, both for conservation and for other pursuits.

Book chapter↗

USGS2025

lasertram: A Python library for time resolved analysis of laser ablation inductively coupled plasma mass spectrometry data

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) data has a wide variety of uses in the geosciences for in-situ chemical analysis of complex natural materials. Improvements to instrument capabilities and operating software have drastically reduced the time required to generate large volumes of data relative to previous methodologies. Raw data from LA-ICP-MS, however, is in counts per unit time (typically counts per second), not elemental concentrations and converting these count ratesto concentrations requires additional processing. For complex materials where the ablated volume may contain a range of material compositions, a moderate amount of user input is also required if appropriate concentrations are to be accurately calculated. In geologic materials such as glasses and minerals that potentially have numerous heterogeneities (e.g., microlites or other inclusions) within them, this is typically determiningwhether the total ablation signal should be filtered to remove these heterogeneities. This necessitates that the LA-ICP-MS data processing pipeline is one that is not automated, but is also designed to enable rapid and efficient processing of large volumes of data. Here we introduce , a Python library for the time resolved analysis of LA-ICP-MS data. We outline its mathematical theory, code structure, and provide an example of how it can be used to provide the time resolved analysis necessitated by LA-ICP-MS data of complex geologic materials. Throughout the pipeline we show how metadata and data are incrementally added to the objects created such that virtually any aspect of an experiment may be interrogated and its quality assessed. We also show, that when combined with other Python libraries for building graphical user interfaces, it can be utilized outside of a pure scripting environment. can be found at https://doi.org/10.5066/P1DZUR3Z

Applied Computing and Geosciences↗

USGS2011

Use of upscaled elevation and surface roughness data in two-dimensional surface water models

In this paper, we present an approach that uses a combination of cell-block- and cell-face-averaging of high-resolution cell elevation and roughness data to upscale hydraulic parameters and accurately simulate surface water flow in relatively low-resolution numerical models. The method developed allows channelized features that preferentially connect large-scale grid cells at cell interfaces to be represented in models where these features are significantly smaller than the selected grid size. The developed upscaling approach has been implemented in a two-dimensional finite difference model that solves a diffusive wave approximation of the depth-integrated shallow surface water equations using preconditioned Newton–Krylov methods. Computational results are presented to show the effectiveness of the mixed cell-block and cell-face averaging upscaling approach in maintaining model accuracy, reducing model run-times, and how decreased grid resolution affects errors. Application examples demonstrate that sub-grid roughness coefficient variations have a larger effect on simulated error than sub-grid elevation variations.

Advances in Water Resources↗

USGS2007

A review of land–sea coupling by groundwater discharge of nitrogen to New England estuaries: Mechanisms and effects

Hydrologists have long been concerned with the interface of groundwater flow into estuaries, but not until the end of the last century did other disciplines realize the major role played by groundwater transport of nutrients to estuaries. Mass balance and stable isotopic data suggest that land-derived NO 3 , NH 4 , and dissolved organic N do enter estuaries in amounts likely to affect the function of the receiving ecosystem. Because of increasing human occupancy of the coastal zone, the nutrient loads borne by groundwater have increased in recent decades, in spite of substantial interception of nutrients within the land and aquifer components of watersheds. Groundwater-borne nutrient loads have increased the N content of receiving estuaries, increased phytoplankton and macroalgal production and biomass, decreased the area of seagrasses, and created a cascade of associated ecological changes. This linkage between land use and eutrophication of estuaries occurs in spite of mechanisms, including uptake of land-derived N by riparian vegetation and fringing wetlands, “unloading” by rapid water removal, and direct N inputs to estuaries, that tend to uncouple the effects of land use on receiving estuaries. It can be expected that as human activity on coastal watersheds continues to increase, the role of groundwater-borne nutrients to the receiving estuary will also increase.

New England↗