SEARCH · USGS Science

Results for “Geothermics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

USGS1974

Mineral resources of Du Noir Addition, Washakie Wilderness area, Fremont County, Wyoming

The Du Noir Addition to the Washakie Wilderness area consists of 34,200 acres (13,840 hectares) of scenic mountainous terrain that adjoins the Teton Wilderness and Washakie Wilderness areas. The area was studied in 1973 by the U.S. Geological Survey and U.S. Bureau of Mines to evaluate its mineral, fuel, and geothermal energy potential. This evaluation is based on a search of the geologic literature, claim and production records, and fieldwork including mapping, inspection of claims and prospects, interpretation of aeromagnetic maps, and analyses of bedrock and stream-sediment samples. Flat-lying Eocene volcaniclastic rocks of the Absaroka volcanic field are exposed in about two-thirds of the Du Noir Addition. These volcanics unconformably overlie the deeply eroded, northwest-trending Du Noir anticline in which Paleozoic marine strata of Devonian through Permian age are exposed. Of lesser importance are small deposits of Eocene non-volcanic conglomerate, and basaltic intrusive and extrusive rocks of late Pliocene and possibly younger age. The results of this study indicate that the mineral, fuel, and geothermal potential of the Du Noir Addition are minimal. Low-grade copper-molybdenum mineralization occurs outside the addition, associated with intrusive rocks, but no indications of alteration or mineralization were found within the study area. Anomalous, but not economically important, concentrations of molybdenum and uranium were found in Permian and Eocene carbonaceous shales. Phosphate rock in the Phosphoria Formation occurs in beds too thin to constitute a resource. Large amounts of very pure limestone are present in the Madison Limestone, but equally pure limestone, much closer to transportation facilities, is found throughout this part of Wyoming. That part of the Du Noir anticline in the addition is too deeply eroded to be a likely reservoir of oil and gas. Present data indicates a low potential for geothermal energy in or near the addition.

Wyoming↗

USGS1979

Sulfate geothermometry of thermal waters in the western United States

Sulfate geothermometry recently gained acceptance as a geothermal exploration tool when it was adopted as one of the geothermometers in the Assessment of Geothermal Resources of the United States-1978 (Muffler 1979). Over 120 samples, 75 of which are from Known Geothermal Resource Areas, were used in the assessment. Data required for calculation of the sulfate geothermometer temperatures, along with Na-K-Ca, quartz, and chalcedony geothermometer temperatures for comparison, are listed in table 1. For greater accuracy data from new or better samples have occasionally supplemented or replaced data used in the 1978 assessment. Samples from Yellowstone National Park has been omitted because they were discussed by McKenzie and Truesdell (1974).

Open-File Report↗

USGS1979

Audio-magnetotelluric data log and station-location map for the Silver Star Hot Springs area, Montana

During a period of 3 days, 22 audio-magnetotelluric (AMT) soundings were made in the area of the Silver Star Hot Springs, Mont. (fig. 1). These soundings were made to assess the geothermal potential along a northern trend of. hot springs from New Biltmore Hot Springs north to Broadwater Hot Springs, Mont. Scalar resistivities from the data log (table 1) show that thermal waters have probably altered the Cenozoic basin fill to the northeast for at least 4-5 km. Leakage of the geothermal system to the surface is probably taking place along a range-front fault at the contacts between the Precambrian metamorphics on the west and the Cenozoic basin fill on the east. Any potential geothermal system would probably be in the area near the existing hot springs or within a few kilometers to the north or northeast.

Montana↗

USGS1979

Audio-magnetotelluric data log and station-location map for the Ennis Hot Springs area, Montana

Four days were spent collecting 20 audio-magnetotelluric (AMT) soundings in the area of the Ennis Hot Springs, Mont. (fig. 1). These soundings were made to assist in a regional evaluation of the geothermal potential of the Ennis Hot Springs area. Scalar resistivities from the data log (table 1) are indicative of thermal water altering the Quaternary alluvium to the southeast. The alteration extends over an area of 1.5 km by 4 km. The geothermal system is probably along a north-south range fault between the Precambrian gneiss and the Tertiary gravels. The scalar resistivities also indicate a northwest trend that may be an intersecting fault. Therefore any geothermal potential would probably be in the area near the existing hot spring, with a possible extent to the northwest of 1 km and to the southeast some 3 km.

Montana↗

USGS1996

Hydrologic data and description of a hydrologic monitoring plan for Medicine Lake Volcano, California

A hydrologic reconnaissance of the Medicine Lake Volcano area was done to collect data needed for the design of a hydrologic monitoring plan. The reconnaissance was completed during two field trips made in June and September 1992, during which geothermal and hydrologic features of public interest in the Medicine Lake area were identified. Selected wells, springs, and geothermal features were located and documented, and initial water-level, discharge, temperature, and specific-conductance measurements were made. Lakes in the study area also were surveyed during the September field trip. Temperature, specific- conductance, dissolved oxygen, and pH data were collected by using a multiparameter probe. The proposed monitoring plan includes measurement of water levels in wells, discharge from springs, and lake stage, as well as analysis of well-,spring-, and lake-water quality. In determining lake-water quality, data for both stratified and unstratified conditions would be considered. (Data for stratified conditions were collected during the reconnaissance phase of this project, but data for unstratified conditions were not.) In addition, lake stage also would be monitored. A geothermal feature near Medicine Lake is a "hot spot" from which hot gases discharge from two distinct vents. Gas chemistry and temperature would be monitored in one of these vents.

Open-File Report↗

USGS2004

Ground-water pumpage and artificial recharge estimates for calendar year 2000 and average annual natural recharge and interbasin flow by hydrographic area, Nevada

Nevada's reliance on ground-water resources has increased because of increased development and surface-water resources being fully appropriated. The need to accurately quantify Nevada's water resources and water use is more critical than ever to meet future demands. Estimated ground-water pumpage, artificial and natural recharge, and interbasin flow can be used to help evaluate stresses on aquifer systems. In this report, estimates of ground-water pumpage and artificial recharge during calendar year 2000 were made using data from a variety of sources, such as reported estimates and estimates made using Landsat satellite imagery. Average annual natural recharge and interbasin flow were compiled from published reports. An estimated 1,427,100 acre-feet of ground water was pumped in Nevada during calendar year 2000. This total was calculated by summing six categories of ground-water pumpage, based on water use. Total artificial recharge during 2000 was about 145,970 acre-feet. At least one estimate of natural recharge was available for 209 of the 232 hydrographic areas (HAs). Natural recharge for the 209 HAs ranges from 1,793,420 to 2,583,150 acre-feet. Estimates of interbasin flow were available for 151 HAs. The categories and their percentage of the total ground-water pumpage are irrigation and stock watering (47 percent), mining (26 percent), water systems (14 percent), geothermal production (8 percent), self-supplied domestic (4 percent), and miscellaneous (less than 1 percent). Pumpage in the top 10 HAs accounted for about 49 percent of the total ground-water pumpage. The most ground-water pumpage in an HA was due to mining in Pumpernickel Valley (HA 65), Boulder Flat (HA 61), and Lower Reese River Valley (HA 59). Pumpage by water systems in Las Vegas Valley (HA 212) and Truckee Meadows (HA 87) were the fourth and fifth highest pumpage in 2000, respectively. Irrigation and stock watering pumpage accounted for most ground-water withdrawals in the HAs with the sixth through ninth highest pumpage. Geothermal production accounted for most pumpage in the Carson Desert (HA 101). Reinjection of ground water pumped for geothermal energy production accounted for about 64 percent (93,310 acre-feet) of the total artificial recharge. The only artificial recharge by water systems was in Las Vegas Valley, where 29,790 acre-feet of water from the Colorado River was injected into the aquifer system. Artificial recharge by mining totaled 22,870 acre-feet. Net ground-water flow was estimated only for the 143 HAs with available estimates of both natural recharge and interbasin flow. Of the 143 estimates, 58 have negative net ground-water flow, indicating that ground-water storage could be depleted if pumpage continues at the same rate. The State has designated HAs where permitted ground-water rights approach or exceed the estimated average annual recharge. Ten HAs were identified that are not designated and have a net ground-water flow between -1,000 to -35,000 acre-feet. Due to uncertainties in recharge, the water budgets for these HAs may need refining to determine if ground-water storage is being depleted.

Nevada↗

USGS2012

Historical and potential groundwater drawdown in the Bruneau area, Owyhee County, southwestern Idaho

Geothermal seeps and springs in the Bruneau area in southwestern Idaho provide a vital but disappearing habitat for the Bruneau hot springsnail (Pyrgulopsis bruneauensis). In order to aid in conservation efforts, a two-part study was conducted (1) to determine trends in groundwater levels over time and (2) to simulate drawdown in aquifers that contribute to the geothermal seeps and springs along the Bruneau River. Seasonal and Regional Kendall tests for trends were used to determine water-level trends over a 20-year monitoring (1990–2010) period. Seasonal Kendall tests were used to calculate trends in groundwater-levels in 22 monitoring wells and indicated statistically significant changes in water level with trends ranging from 0.21 to 1.0 feet per year. Regional Kendall tests were used to calculate drawdown in categories of wells based on five criteria (well depth, distance from Indian Bathtub Spring, geologic unit, regional topographic valley, and temperature). Results from Regional Kendall tests indicate that slope of the trend (in feet per year) increased as a function of well depth; trends in water level as a function of other categories did not exhibit an obvious pattern based on distance from Indian Bathtub Spring, geologic unit, topographic valley, or temperature. Analytical solutions were used to simulate drawdown and recovery in wells using the Theis equation and a range of hydraulic parameters. Drawdown effects were determined by changing the storativity, transmissivity, and flow values over a hypothetical timeline. For example, estimates projected that after 20 years of pumping (at an assumed storativity of 0.002, a transmissivity of 980,000 feet squared per day, and a flow of 100 acre-feet per year), 1 foot of drawdown in the volcanic-rock aquifers would not be detected; however, other estimates using the same time frame but different hydraulic parameters (storativity of 0.001, transmissivity of 13,000 feet squared per day, and 610 acre-feet per year) determined 1 foot of drawdown to be detected as far as 29 miles from the hypothetical pumping well. A sensitivity analysis was performed to determine the effect of changing one hydraulic parameter while keeping the others constant. Many assumptions had to be made about properties of the aquifer in order to calculate effects of drawdown on geothermal seeps and springs. These analyses estimate pumping effects over time; the recovery of groundwater levels would likely take significantly longer to observe than the effects from pumping.

Idaho↗

USGS2014

Provisional maps of thermal areas in Yellowstone National Park, based on satellite thermal infrared imaging and field observations

Maps that define the current distribution of geothermally heated ground are useful toward setting a baseline for thermal activity to better detect and understand future anomalous hydrothermal and (or) volcanic activity. Monitoring changes in the dynamic thermal areas also supports decisions regarding the development of Yellowstone National Park infrastructure, preservation and protection of park resources, and ensuring visitor safety. Because of the challenges associated with field-based monitoring of a large, complex geothermal system that is spread out over a large and remote area, satellite-based thermal infrared images from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used to map the location and spatial extent of active thermal areas, to generate thermal anomaly maps, and to quantify the radiative component of the total geothermal heat flux. ASTER thermal infrared data acquired during winter nights were used to minimize the contribution of solar heating of the surface. The ASTER thermal infrared mapping results were compared to maps of thermal areas based on field investigations and high-resolution aerial photos. Field validation of the ASTER thermal mapping is an ongoing task. The purpose of this report is to make available ASTER-based maps of Yellowstone’s thermal areas. We include an appendix containing the names and characteristics of Yellowstone’s thermal areas, georeferenced TIFF files containing ASTER thermal imagery, and several spatial data sets in Esri shapefile format.

Wyoming↗

USGS2015

Numerical simulation of groundwater flow, resource optimization, and potential effects of prolonged drought for the Citizen Potawatomi Nation Tribal Jurisdictional Area, central Oklahoma

A hydrogeological study including two numerical groundwater-flow models was completed for the Citizen Potawatomi Nation Tribal Jurisdictional Area of central Oklahoma. One numerical groundwater-flow model, the Citizen Potawatomi Nation model, encompassed the jurisdictional area and was based on the results of a regional-scale hydrogeological study and numerical groundwater flow model of the Central Oklahoma aquifer, which had a geographic extent that included the Citizen Potawatomi Nation Tribal Jurisdictional Area. The Citizen Potawatomi Nation numerical groundwater-flow model included alluvial aquifers not in the original model and improved calibration using automated parameter-estimation techniques. The Citizen Potawatomi Nation numerical groundwater-flow model was used to analyze the groundwater-flow system and the effects of drought on the volume of groundwater in storage and streamflow in the North Canadian River. A more detailed, local-scale inset model was constructed from the Citizen Potawatomi Nation model to estimate available groundwater resources for two Citizen Potawatomi Nation economic development zones near the North Canadian River, the geothermal supply area and the Iron Horse Industrial Park. Groundwater pumping rates at potential well locations were optimized using the most recent version of the U.S. Geological Survey Groundwater-Management Process for MODFLOW. The objectives of optimization were to determine if a total pumping rate of 500 gallons per minute could be pumped from 5 wells at the geothermal supply area and to maximize discharge from 16 wells at the Iron Horse Industrial Park without exceeding specified head drawdown constraints at the pumping wells and thus prevent groundwater depletion. The inset model was used to estimate North Canadian River streamflow depletion caused by optimized pumping at the Iron Horse Industrial Park because water quality was a concern, and the river may have degraded water quality compared to water in other parts of the alluvial aquifer. The fate of streamflow that infiltrates into groundwater because of pumping was not directly determined, but it was assumed that this water could end up in the well discharge, and was considered to be a maximum proportion of well discharge derived from the North Canadian River. The total optimized continuous pumping rate from five managed wells at the geothermal supply area was 638 gallons per minute, which exceeded the target pumping rate of 500 gallons per minute. The total continuous pumping rate from 16 wells at the Iron Horse Industrial Park was 1,472 gallons per minute, which induced stream infiltration of approximately 4.1 gallons per minute (approximately 0.3 percent of the total well discharge) from the North Canadian River. To estimate the effects of drought on water resources in the Citizen Potawatomi Nation Tribal Jurisdictional Area, a hypothetical 10-year drought during which precipitation would decrease by 50 percent was simulated by decreasing model groundwater recharge by the same proportion for the period 1990–2000 of the transient model. The effects of the drought were estimated by calculating the change in the volume of groundwater storage and groundwater flow to streams at the end of the drought period, and the change in simulated streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., during and after the drought. The hypothetical decrease in recharge during the simulated drought caused groundwater in storage over the entire model in the study area to decrease by 361,500 acre-feet (14,100 acre-feet in the North Canadian River alluvial aquifer and 347,400 acre-feet in the Central Oklahoma aquifer), or approximately 0.2 percent of the total groundwater in storage over the drought period. This small percentage of groundwater loss showed that the Central Oklahoma aquifer as a bedrock aquifer has relatively low rates of recharge from the surface relative to the approximate storage. The budget for base flow to the North Canadian River indicated that the change in groundwater flow to the North Canadian River decreased during the 10-year drought by 386,500 acre-feet, or 37 percent. In all other parts of the Citizen Potawatomi Nation Tribal Jurisdictional Area, base flow decreased by 292,000 acre-feet, or 28 percent. Streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., decreased during the hypothetical drought by as much as 28 percent, and the mean change in streamflow decreased as much as 16 percent. Streamflow at the Shawnee streamflow-gaging station did not recover to nondrought conditions until about 3 years after the simulated drought ended, during the relatively wet year of 2007.

Oklahoma↗

USGS2015

Status and understanding of groundwater quality in the Northern Coast Ranges study unit, 2009: California GAMA Priority Basin Project

Groundwater quality in the 633-square-mile (1,639-square-kilometer) Northern Coast Ranges (NOCO) study unit was investigated as part of the Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) Program and the U.S. Geological Survey (USGS) National Water-Quality Assessment Program. The study unit is composed of two study areas (Interior Basins and Coastal Basins) and is located in northern California in Napa, Sonoma, Lake, Colusa, Mendocino, Glenn, Humboldt, and Del Norte Counties. The GAMA-PBP is being conducted by the California State Water Resources Control Board in collaboration with the USGS and the Lawrence Livermore National Laboratory. The GAMA NOCO study was designed to provide a spatially unbiased assessment of the quality of untreated (ambient) groundwater in the primary aquifer system within the study unit. The assessment is based on water-quality and ancillary data collected in 2009 by the USGS from 58 sites and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system is defined by the perforation intervals of sites listed in the CDPH water-quality database for the NOCO study unit. Groundwater quality in the primary aquifer system may differ from the quality in the shallow or deep water-bearing zones. The first component of this study, the status assessment of the current quality of the groundwater resource, was performed by using data from samples analyzed for inorganic constituents (such as trace elements and major and minor ions), organic constituents (volatile organic compounds and pesticides and pesticide degradates), the special-interest constituent perchlorate, and microbial indicators. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the NOCO study unit, not the quality of treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or nonregulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration less than or equal to a benchmark. Relative-concentrations of organic constituents and perchlorate were classified as “high” (relative-concentration >1.0), “moderate” (0.1 < relative-concentration ≤1.0), or “low” (relative-concentration ≤0.1). Relative-concentrations of inorganic constituents were classified as “high” (relative-concentration >1.0), “moderate” (0.5 < relative-concentration ≤1.0), or “low” (relative-concentration ≤0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion was defined as the percentage of the area of the primary aquifer system with a relative-concentration >1.0 for a particular constituent or class of constituents; the percentage is based on an aerial rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the NOCO study unit (within 90 percent confidence intervals). Inorganic constituents (one or more) with health-based benchmarks were detected at high relative-concentrations in 10.3 percent and at moderate relative-concentrations in 13.8 percent of the primary aquifer system. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of boron (in 8.6 percent of the primary aquifer system), arsenic (in 3.4 percent), and barium (in 1.7 percent). Inorganic constituents with aesthetic-based benchmarks were detected at high relative-concentrations in 39.7 percent and at moderate relative-concentrations in 10.3 percent of the primary aquifer system. The constituents present at high relative-concentrations were iron (25.9 percent) and manganese (39.7 percent). Relative-concentrations of organic constituents with health-based benchmarks (one or more) were high in 0.2 percent, moderate in 1.7 percent, and low in 39.7 percent of the primary aquifer system. Organic constituents were not detected in 58.4 percent of the primary aquifer system. Of the 168 organic constituents analyzed, 11 constituents were detected. Two organic constituents had detection frequencies >10 percent: the trihalomethane chloroform and the herbicide simazine. For the 10 detected organic constituents that had health-based benchmarks, nearly all detections had low relative-concentrations. The special-interest constituent perchlorate was detected at moderate relative-concentrations in 1.7 percent and at low relative-concentrations in 22.4 percent of the primary aquifer system. Perchlorate was not detected in 75.9 percent of the primary aquifer system. The second component of this study, the understanding assessment , evaluated relations between constituent concentrations and values of selected potential explanatory factors to identify the factors potentially affecting the concentrations and occurrences of constituents found at high relative-concentrations or, for organic constituents, with detection frequencies >10 percent. The potential explanatory factors evaluated were land use (including density of septic tanks and leaking or formerly leaking underground fuel tanks), well construction (well depth and depth to the top of the perforated interval in the well), hydrologic conditions (aridity index, field water temperature, and distance to nearest hot spring and geothermal well), pH, dissolved oxygen concentration, study area, groundwater age distribution, and geochemical conditions. High and moderate relative-concentrations of boron primarily occurred in the Interior Basins study area and may be attributed to groundwater interacting with hydrothermal systems. High and moderate relative-concentrations of boron were associated with elevated groundwater temperatures, groundwater chemistry characteristics similar to those of geothermal waters, and distance to known geothermal areas. Boron concentrations generally were higher where low dissolved oxygen concentrations or anoxic conditions exist. High and moderate relative-concentrations of arsenic predominantly occur in the Interior Basins study area under reducing conditions. Arsenic concentrations also may be influenced by hydrothermal systems (when present). Chloroform, simazine, and perchlorate were observed in the Interior Basins and Coastal Basins study areas, predominantly at shallow sites with top-of-perforation depths ≤70 feet below land surface, with modern water (post-1950s), and with oxic groundwater conditions.

California↗

USGS2026

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

USGS1978

Geohydrologic data from the Jemez Mountains and vicinity, north-central New Mexico

The Jemez Mountains volcanic region, on the west margin of the Rio Grande rift in north-central New Mexico, is the site of studies for power development from geothermal heat. This report summarizes geohydrologic data to provide background information relative to the geothermal exploration and to investigate the usefulness of hydrology in assessment of the geothermal resource. Eleven tables present chemical, temperature, discharge , and other data for springs, wells, and streams. Accompanying figures show locations of the data points and present temperature profiles and geophysical logs for selected wells. (Woodard-USGS)

Water-Resources Investigations Report↗

USGS2016

A biographical memoir of Donald Edward White

Donald E. White was a leading scientist for the U.S. Geological Survey, where his career was devoted almost entirely to the study of hydrothermal processes in the Earth’s crust, from the dual perspectives of active geothermal systems and of extinct hydrothermal systems now represented only by ore deposits and alteration patterns. White was devoted to analyzing the mechanisms by which ore-forming metals are concentrated, transported, and deposited. His early work on antimony deposits and on mercury transport led to the understanding that these elements, as well as some precious metals, were concentrated in hydrothermal convection systems characterized by dilute chloride waters of predominantly meteoric origin. He concluded, on the other hand, that base metals required more concentrated brines, as was impressively confirmed in the early 1960s by the discovery of the metal-rich fluids of the Salton Sea geothermal system and subsequently by the recognition of sulfide-depositing hydrothermal systems on the sea floor. His studies of active hot-spring systems elucidated the principles of geyser activity and provided the scientific foundation for research programs aimed at the understanding of geothermal systems throughout the world.

Article↗

USGS2023

New maps of conductive heat flow in the Great Basin, USA: Separating conductive and convective influences

Geothermal well data from Southern Methodist University and the U.S. Geological Survey (USGS) were used to create maps of estimated background conductive heat flow across the Great Basin region of the western United States. These heat flow maps were generated as part of the USGS hydrothermal and Enhanced Geothermal Systems resource assessment process, and the creation process seeks to remove the influence of hydrothermal convection from the predictions of the background conductive heat flow. The heat flow maps were constructed using a custom-developed iterative process using weighted regression, in which convectively influenced outliers were de-emphasized by assigning lower weights to measurements with heat flow values further from the estimated local trend (e.g., local convective influence). The local linear weighted regression algorithm is two-dimensional locally estimated scatterplot smoothing where smoothness was controlled by varying the number of nearby wells used for each local interpolation. Three maps resulting from conductive heat flow models are detailed in this paper, highlighting the influence of measurement confidence. The three maps use either: measurements from all wells with equal weight (no confidence weights), or one of two different published categorization methods to de-emphasize low-quality measurements; one categorization method graded thermal gradient quality, the other categorization method graded thermal conductivity quality. Each map is an estimate of background conductive heat flow as a function of reported data quality, and a point coverage is also provided for all wells in the compiled dataset. The point coverage includes an important new attribute for geothermal wells: the residual, which can be interpreted as the departure of a well from the estimated background heat flow conditions, and the value of the residual may be useful in identifying the influence of fluids (hydrothermal or groundwater) on conductive heat flow. Of the three maps presented, the map that de-emphasized the impact of wells with low-quality thermal gradient measurements appears to perform best because it did not incorporate many of the wells in the Snake River Plain that do not penetrate the aquifer and are therefore very unlikely to reflect true conductive conditions.

Great Basin↗

USGS1991

Changes in thermodynamic conditions of the Ahuachapán reservoir due to production and injection

Since large-scale exploitation of the Ahuachapán reservoir began in 1975 large changes in the reservoir thermodynamic conditions have occurred. Drawdown of up to 15 bars and significant temperature changes have been observed in the wellfield. Temperatures have declined due to boiling in the reservoir in response to the pressure drawdown; localized and minor cooling due to reinjection of spent geothermal fluids have also been observed. There are indications of cold fluid influx deep into the reservoir from the west and north. Reservoir temperatures show that a significant amount of hot fluid recharge comes to the wellfield from the southeast, and temperatures also indicate that the recharge rate has increased with time as pressure declines in the reservoir. Chemical analyses of the produced fluids show that most wells are fed by a mixture of geothermal fluids and cooler, less-saline waters. The cold water inflow has increased due to exploitation, as demonstrated by decreased salinity of the produced fluids.

Geothermics↗

USGS1993

The hydrothermal-convection systems of kilauea: an historical perspective

Kilauea is one of only two basaltic volcanoes in the world where geothermal power has been produced commercially. Little is known about the origin, size and longevity of its hydrothermal-convection systems. We review the history of scientific studies aimed at understanding these systems and describe their commercial development. Geothermal energy is a controversial issue in Hawai'i, partly because of hydrogen sulfide emissions and concerns about protection of rain forests. ?? 1993.

Geothermics↗

USGS2005

The 2003 eruption of Anatahan volcano, Commonwealth of the Northern Mariana Islands: Chronology, volcanology, and deformation

The first historical eruption on Anatahan Island occurred on 10 May 2003 from the east crater of the volcano. The eruption was preceded by several hours of seismicity. Two and a half hours before the outbreak, the number of earthquakes surged to more than 100 events per hour. At 0730 UTC, the Washington Volcanic Ash Advisory Center issued an ash advisory. Although the eruption lasted for 3 months, the majority of erupted material was expelled during the first 2 weeks. The opening episode of the eruption resulted in a deposit of juvenile scoria and lithic clasts, the latter derived from geothermally altered colluvial fill from the vent area. The opening episode was followed by crater enlargement and deepening, which produced deposits of coarse, reddish-brown ash containing a mixture of juvenile and lithic clasts. The third episode of the eruption produced coarse ash and lapilli comprised of juvenile scoria and minor amounts of lithics. Plume heights were 4500 to 13,000 m for the initial three phases. The fourth episode, from about May 18 through early August, was characterized by smaller plume heights of 900 to 2400 m, and steam was the dominant component. Minor amounts of coarse ash and accretionary-lapilli ash comprise most of the deposits of the fourth episode, although ballistic blocks and bombs of andesite lava are also locally present. These andesite blocks were emplaced by an explosion on 14 June, which destroyed a small lava dome extruded during the first week of June. Activity waned as the summer progressed, and subsequent ash deposits accumulated in July and early August, by which time the eruption had effectively ended. In September and October, degassing and geothermal activity continued, characterized by small geysers, boiling water, and jetting steam. Noteworthy deviations from this activity were a surge event in late May–early June and the destruction of the lava dome on 14 June. We calculated on-land tephra-fall deposits to have a bulk volume of about 27.5 × 10 6 m 3 , covering an area of 40.6 km 2 . We determined the juvenile to lithic content of the deposits and corrected the bulk volume to a juvenile volume of 24.0 × 10 6 m 3 . We use a volume corrected density of 1.32 g/cm 3 to convert the juvenile volume of 24.0 × 10 6 m 3 to a magma volume of 13.2 × 10 6 m 3 . Using the methods of Fierstein and Nathenson (1992) [Fierstein, J., Nathenson, M., 1992. Another look at the calculation of fallout tephra volumes. Bull. Volcanology. 54, 156–167.], we computed the total eruption volume at 45.4 × 10 6 m 3 . Deformation surveys recorded large changes surrounding the east crater. The modeled volumetric change based on the surveys was 0.82 × 10 6 m 3 of magma, which we estimate corresponds to a minimum intrusion of 10 × 10 6 m 3 of magma which is in good agreement with our calculated on-land magma volume.

Anatahan volcano↗

USGS2010

Source and fate of inorganic solutes in the Gibbon River, Yellowstone National Park, Wyoming, USA. II. Trace element chemistry

The Gibbon River in Yellowstone National Park receives inflows from several geothermal areas, and consequently the concentrations of many trace elements are elevated compared to rivers in non-geothermal watersheds. Water samples and discharge measurements were obtained from the Gibbon River and its major tributaries near Norris Geyser Basin under the low-flow conditions of September 2006 allowing for the identification of solute sources and their downstream fate. Norris Geyser Basin, and in particular Tantalus Creek, is the largest source of many trace elements (Al, As, B, Ba, Br, Cs, Hg, Li, Sb, Tl, W, and REEs) to the Gibbon River. The Chocolate Pots area is a major source of Fe and Mn, and the lower Gibbon River near Terrace Spring is the major source of Be and Mo. Some of the elevated trace elements are aquatic health concerns (As, Sb, and Hg) and knowing their fate is important. Most solutes in the Gibbon River, including As and Sb, behave conservatively or are minimally attenuated over 29 km of fluvial transport. Some small attenuation of Al, Fe, Hg, and REEs occurs but primarily there is a transformation from the dissolved state to suspended particles, with most of these elements still being transported to the Madison River. Dissolved Hg and REEs loads decrease where the particulate Fe increases, suggesting sorption onto suspended particulate material. Attenuation from the water column is substantial for Mn, with little formation of Mn as suspended particulates.

Wyoming↗