USGS Science⌕ Search

SEARCH · USGS Science

Results for “Clear Waters”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

Wave-resolving Shoreline Boundary Conditions for Wave-Averaged Coastal Models

Downscaling broadscale ocean model information to resolve the fine-scale swash-zone dynamics has a number of applications, such as improved resolution of coastal flood hazard drivers, modeling of sediment transport and seabed morphological evolution. A new method is presented, which enables wave-averaged models for the nearshore circulation to include short-wave induced swash zone dynamics that evolve at the wave group scale (i.e. averaged over the short waves). Such dynamics, which cannot be described, by construction through wave-averaged models, play a fundamental role in nearshore hydrodynamics and morphodynamics. The method is based on the implementation of a set of Shoreline Boundary Conditions (SBCs) in wave-averaged models. The chosen set of SBCs allows for proper computation of the short-wave properties at a mean shoreline () taken as the envelope of the actual shoreline. The suitability of the approach is assessed through implementation of the SBCs into the Regional Ocean Modeling System (ROMS) coupled to a spectral wave model (InWave for IG waves and SWAN for wind waves). As the aim is to assess the viability of the approach, the SBCs are implemented only through a one-way coupling to ROMS (i.e. ROMS forcing the SBCs). Four different test cases – with constant, periodic and bichromatic offshore forcing – are run to assess the model performances. The main results of the analysis are: (a) the proposed SBCs can well reproduce the shoreline motion and swash zone dynamics in there for all chosen tests (RMSE and BIAS less than 20 % up to a cross-shore resolution of 4.0 m ( or )) and (b) implementation of the SBCs allows ROMS to accurately simulate the swash zone flows even at a resolution 40 times coarser than that needed by ROMS with its own wet–dry routine to properly describe the same flows. The latter result clearly demonstrates the major computational advantage of using the proposed SBCs. We also show that most of the swash zone dynamics is due to the mean flow (i.e. incoming Riemann variable) and the local (at ) wave height. However, especially in the case of bichromatic waves, the swash zone water volume content also seems to play a crucial role.

Ocean Modeling↗

Formation and evolution of valley-bottom and channel features, Lower Deschutes River, Oregon

Primary geologic and geomorphic processes that formed valley-bottom and channel features downstream from the Pelton-Round Butte dam complex are inferred from a canyon-long analysis of feature morphology, composition, location, and spatial distribution. Major controls on valley-bottom morphology are regional tectonics, large landslides, and outsized floods (floods with return periods greater than 1000 yrs), which include the late Holocene Outhouse Flood and several Quaternary landslide dam failures. Floods with a return period on the order of 100 yrs, including historical floods in 1996, 1964, and 1861, contribute to fan building and flood plain formation only within the resistant framework established by the major controls. Key processes in the formation of channel features, in particular the 153 islands and 23 large rapids, include long-term bedrock erosion, outsized floods, and century-scale floods. Historical analysis of channel conditions since 1911 indicates that the largest islands, which are cored by outsized-flood deposits, locally control channel location, although their margins are substantially modified during annual- to century-scale floods. Islands cored by bedrock have changed little. Islands formed by annual- to century-scale floods are more susceptible to dynamic interactions between tributary sediment inputs, mainstem flow hydraulics, and perhaps riparian vegetation. Temporal patterns of island change in response to the sequence of 20th century flooding indicate that many islands accreted sediment during annual- to decadal-scale floods, but eroded during larger century-scale floods. There is, however, no clear trend of long-term changes in patterns of island growth, movement, or erosion either spatially or temporally within the lower Deschutes River.

Oregon↗

Use of medium-range numerical weather prediction model output to produce forecasts of streamflow

This paper examines an archive containing over 40 years of 8-day atmospheric forecasts over the contiguous United States from the NCEP reanalysis project to assess the possibilities for using medium-range numerical weather prediction model output for predictions of streamflow. This analysis shows the biases in the NCEP forecasts to be quite extreme. In many regions, systematic precipitation biases exceed 100% of the mean, with temperature biases exceeding 3°C . In some locations, biases are even higher. The accuracy of NCEP precipitation and 2-m maximum temperature forecasts is computed by interpolating the NCEP model output for each forecast day to the location of each station in the NWS cooperative network and computing the correlation with station observations. Results show that the accuracy of the NCEP forecasts is rather low in many areas of the country. Most apparent is the generally low skill in precipitation forecasts (particularly in July) and low skill in temperature forecasts in the western United States, the eastern seaboard, and the southern tier of states. These results outline a clear need for additional processing of the NCEP Medium-Range Forecast Model (MRF) output before it is used for hydrologic predictions. Techniques of model output statistics (MOS) are used in this paper to downscale the NCEP forecasts to station locations. Forecasted atmospheric variables (e.g., total column precipitable water, 2-m air temperature) are used as predictors in a forward screening multiple linear regression model to improve forecasts of precipitation and temperature for stations in the National Weather Service cooperative network. This procedure effectively removes all systematic biases in the raw NCEP precipitation and temperature forecasts. MOS guidance also results in substantial improvements in the accuracy of maximum and minimum temperature forecasts throughout the country. For precipitation, forecast improvements were less impressive. MOS guidance increases he accuracy of precipitation forecasts over the northeastern United States, but overall, the accuracy of MOS-based precipitation forecasts is slightly lower than the raw NCEP forecasts. Four basins in the United States were chosen as case studies to evaluate the value of MRF output for predictions of streamflow. Streamflow forecasts using MRF output were generated for one rainfall-dominated basin (Alapaha River at Statenville, Georgia) and three snowmelt-dominated basins (Animas River at Durango, Colorado: East Fork of the Carson River near Gardnerville, Nevada: and Cle Elum River near Roslyn, Washington). Hydrologic model output forced with measured-station data were used as "truth" to focus attention on the hydrologic effects of errors in the MRF forecasts. Eight-day streamflow forecasts produced using the MOS-corrected MRF output as input (MOS) were compared with those produced using the climatic Ensemble Streamflow Prediction (ESP) technique. MOS-based streamflow forecasts showed increased skill in the snowmelt-dominated river basins, where daily variations in streamflow are strongly forced by temperature. In contrast, the skill of MOS forecasts in the rainfall-dominated basin (the Alapaha River) were equivalent to the skill of the ESP forecasts. Further improvements in streamflow forecasts require more accurate local-scale forecasts of precipitation and temperature, more accurate specification of basin initial conditions, and more accurate model simulations of streamflow.

Journal of Hydrometeorology↗

Getting ocean acidification on decision makers' to-do lists: dissecting the process through case studies

Much of the detailed, incremental knowledge being generated by current scientific research on ocean acidification (OA) does not directly address the needs of decision makers, who are asking broad questions such as: Where will OA harm marine resources next? When will this happen? Who will be affected? And how much will it cost? In this review, we use a series of mainly US-based case studies to explore the needs of local to international-scale groups that are making decisions to address OA concerns. Decisions concerning OA have been made most naturally and easily when information needs were clearly defined and closely aligned with science outputs and initiatives. For decisions requiring more complex information, the process slows dramatically. Decision making about OA is greatly aided (1) when a mixture of specialists participates, including scientists, resource users and managers, and policy and law makers; (2) when goals can be clearly agreed upon at the beginning of the process; (3) when mixed groups of specialists plan and create translational documents explaining the likely outcomes of policy decisions on ecosystems and natural resources; (4) when regional work on OA fits into an existing set of priorities concerning climate or water quality; and (5) when decision making can be reviewed and enhanced.

Oceanography↗

Simulating adsorption of U(VI) under transient groundwater flow and hydrochemistry: Physical versus chemical nonequilibrium model

Coupled intragrain diffusional mass transfer and nonlinear surface complexation processes play an important role in the transport behavior of U(VI) in contaminated aquifers. Two alternative model approaches for simulating these coupled processes were analyzed and compared: (1) the physical nonequilibrium approach that explicitly accounts for aqueous speciation and instantaneous surface complexation reactions in the intragrain regions and approximates the diffusive mass exchange between the immobile intragrain pore water and the advective pore water as multirate first-order mass transfer and (2) the chemical nonequilibrium approach that approximates the diffusion-limited intragrain surface complexation reactions by a set of multiple first-order surface complexation reaction kinetics, thereby eliminating the explicit treatment of aqueous speciation in the intragrain pore water. A model comparison has been carried out for column and field scale scenarios, representing the highly transient hydrological and geochemical conditions in the U(VI)-contaminated aquifer at the Hanford 300A site, Washington, USA. It was found that the response of U(VI) mass transfer behavior to hydrogeochemically induced changes in U(VI) adsorption strength was more pronounced in the physical than in the chemical nonequilibrium model. The magnitude of the differences in model behavior depended particularly on the degree of disequilibrium between the advective and immobile phase U(VI) concentrations. While a clear difference in U(VI) transport behavior between the two models was noticeable for the column-scale scenarios, only minor differences were found for the Hanford 300A field scale scenarios, where the model-generated disequilibrium conditions were less pronounced as a result of frequent groundwater flow reversals.

Water Resources Research↗

Changes in depth occupied by Great Lakes lake whitefish populations and the influence of survey design

Understanding fish habitat use is important in determining conditions that ultimately affect fish energetics, growth and reproduction. Great Lakes lake whitefish ( Coregonus clupeaformis ) have demonstrated dramatic changes in growth and life history traits since the appearance of dreissenid mussels in the Great Lakes, but the role of habitat occupancy in driving these changes is poorly understood. To better understand temporal changes in lake whitefish depth of capture ( D w ), we compiled a database of fishery-independent surveys representing multiple populations across all five Laurentian Great Lakes. By demonstrating the importance of survey design in estimating D w , we describe a novel method for detecting survey-based bias in D w and removing potentially biased data. Using unbiased D w estimates, we show clear differences in the pattern and timing of changes in lake whitefish D w between our reference sites (Lake Superior) and those that have experienced significant benthic food web changes (lakes Michigan, Huron, Erie and Ontario). Lake whitefish D w in Lake Superior tended to gradually shift to shallower waters, but changed rapidly in other locations coincident with dreissenid establishment and declines in Diporeia densities. Almost all lake whitefish populations that were exposed to dreissenids demonstrated deeper D w following benthic food web change, though a subset of these populations subsequently shifted to more shallow depths. In some cases in lakes Huron and Ontario, shifts towards more shallow D w are occurring well after documented Diporeia collapse, suggesting the role of other drivers such as habitat availability or reliance on alternative prey sources.

Lake Erie, Lake Huron, Lake Michigan, Lake Ontario↗

Reconstructed historical land cover and biophysical parameters for studies of land-atmosphere interactions within the eastern United States

Over the past 350 years, the eastern half of the United States experienced extensive land cover changes. These began with land clearing in the 1600s, continued with widespread deforestation, wetland drainage, and intensive land use by 1920, and then evolved to the present-day landscape of forest regrowth, intensive agriculture, urban expansion, and landscape fragmentation. Such changes alter biophysical properties that are key determinants of land-atmosphere interactions (water, energy, and carbon exchanges). To understand the potential implications of these land use transformations, we developed and analyzed 20-km land cover and biophysical parameter data sets for the eastern United States at 1650, 1850, 1920, and 1992 time slices. Our approach combined potential vegetation, county-level census data, soils data, resource statistics, a Landsat-derived land cover classification, and published historical information on land cover and land use. We reconstructed land use intensity maps for each time slice and characterized the land cover condition. We combined these land use data with a mutually consistent set of biophysical parameter classes, to characterize the historical diversity and distribution of land surface properties. Time series maps of land surface albedo, leaf area index, a deciduousness index, canopy height, surface roughness, and potential saturated soils in 1650, 1850, 1920, and 1992 illustrate the profound effects of land use change on biophysical properties of the land surface. Although much of the eastern forest has returned, the average biophysical parameters for recent landscapes remain markedly different from those of earlier periods. Understanding the consequences of these historical changes will require land-atmosphere interactions modeling experiments.

Journal of Geophysical Research D: Atmospheres↗

Using hierarchical Bayesian multi-species mixture models to estimate tandem hoop-net based habitat associations and detection probabilities of fishes in reservoirs

Species distribution models are useful tools to evaluate habitat relationships of fishes. We used hierarchical Bayesian multispecies mixture models to evaluate the relationships of both detection and abundance with habitat of reservoir fishes caught using tandem hoop nets. A total of 7,212 fish from 12 species were captured, and the majority of the catch was composed of Channel Catfish Ictalurus punctatus (46%), Bluegill Lepomis macrochirus (25%), and White Crappie Pomoxis annularis (14%). Detection estimates ranged from 8% to 69%, and modeling results suggested that fishes were primarily influenced by reservoir size and context, water clarity and temperature, and land-use types. Species were differentially abundant within and among habitat types, and some fishes were found to be more abundant in turbid, less impacted (e.g., by urbanization and agriculture) reservoirs with longer shoreline lengths; whereas, other species were found more often in clear, nutrient-rich impoundments that had generally shorter shoreline length and were surrounded by a higher percentage of agricultural land. Our results demonstrated that habitat and reservoir characteristics may differentially benefit species and assemblage structure. This study provides a useful framework for evaluating capture efficiency for not only hoop nets but other gear types used to sample fishes in reservoirs.

Oklahoma↗

Influence of the diversion of Bear River into Bear Lake (Utah and Idaho) on the environment of deposition of carbonate minerals

Bear River, the largest river in the Great Basin, had some of its flow diverted into Bear Lake through a series of canals constructed between 1911 and 1918, turning Bear Lake into a reservoir. The prediversion lake had an unusually high Mg2+ : Ca2+ ratio (38 by weight), which resulted in precipitation of CaCO3 as aragonite. The amount and mineralogy of the carbonate did not change immediately after the diversion, but during the middle of the 20th century, high-Mg calcite began to precipitate. In contrast, at the time of diversion there were very distinct changes in the isotopic composition of the carbonate that clearly define the time of diversion within the sediments. Sediment-trap studies show that the CaCO3 polymorph that precipitates in the epilimnion of the lake today is high-Mg calcite. Samples in sediment traps placed 2 m above the bottom of the lake in 45 m of water (bottom traps) contain predominantly aragonite and quartz, with lesser amounts of high-Mg and low-Mg calcite and dolomite. Isotopic evidence from the sediments shows that the aragonite that accumulated in the bottom sediment traps and that constitutes the bulk of postdiversion sediments is reworked and redistributed from shallow sites to deep sites. ?? 2007, by the American Society of Limnology and Oceanography, Inc.

Limnology and Oceanography↗

Remote estimation of surface pCO2 on the West Florida Shelf

Surface p CO 2 data from the West Florida Shelf (WFS) have been collected during 25 cruise surveys between 2003 and 2012. The data were scaled up using remote sensing measurements of surface water properties in order to provide a more nearly synoptic map of p CO 2 spatial distributions and describe their temporal variations. This investigation involved extensive tests of various model forms through parsimony and Principal Component Analysis, which led to the development of a multi-variable empirical surface p CO 2 model based on concurrent MODIS (Moderate Resolution Imaging Spectroradiometer) estimates of surface chlorophyll a concentrations (CHL, mg m −3 ), diffuse light attenuation at 490 nm (Kd_Lee, m −1 ), and sea surface temperature (SST, °C). Validation using an independent dataset showed a p CO 2 Root Mean Square Error (RMSE) of <12 µatm and a 0.88 coefficient of determination (R 2 ) for measured and model-predicted p CO 2 ranging from 300 to 550 µatm. The model was more sensitive to SST than to CHL and Kd_Lee, with a 1 °C change in SST leading to a ~16 µatm change in the predicted p CO 2 . Application of the model to the entire WFS MODIS time series between 2002 and 2014 showed clear seasonality, with maxima (~450 µatm) in summer and minima (~350 µatm) in winter. The seasonality was positively correlated to SST (high in summer and low in winter) and negatively correlated to CHL and Kd_Lee (high in winter and low in summer). Inter-annual variations of p CO 2 were consistent with inter-annual variations of SST, CHL, and Kd_Lee. These results suggest that surface water p CO 2 of the WFS can be estimated, with known uncertainties, from remote sensing. However, while the general approach of empirical regression may work for waters from other areas of the Gulf of Mexico, model coefficients need to be empirically determined in a similar fashion.

Continental Shelf Research↗

Geology and ground water in Napa and Sonoma Valleys, Napa and Sonoma Counties, California

Napa and Sonoma Valleys are adjacent alluvium-filled valleys about 40 miles northeast of San Francisco. They occupy alined and structurally controlled depressions in the northern Coast Ranges physiographic province and drain south into San Pablo Bay. The valleys are surrounded and underlain by unconsolidated marine and continental sediments and volcanic rocks of Pliocene and Pleistocene age, which are water bearing in large part and together make up relatively extensive ground-water basins. Napa Valley, the eastern valley, is the larger and has a valley-floor area of about 85 square miles. Sonoma Valley has a valley-floor area of about 35 square miles; in addition, about 10 square miles is unreclaimed tidal marsh. The rock units of Napa and Sonoma Valleys are divided into four classes on the basis of their distribution and relative capacity to yield water: (a) Consolidated virtually non-water-bearing chiefly sedimentary (some metamorphic) rocks that range in age from Jurassic ( ?) to Pliocene; (b) marine shale and sand of the Petaluma formation (Pliocene) and the Merced formation (Pliocene and Pleistocene) that do not crop out within Napa or Sonoma Valleys but perhaps are penetrated by some deep wells drilled in Sonoma Valley; (c) Sonoma volcanics of Pliocene age, parts of which are non-water-bearing and parts of which locally yield large quantities of water; and (d) unconsolidated alluvial deposits mainly of Quaternary age. The deposits of classes (c) and (d) contain the most important aquifers in the area. Most of the water used in these valleys is pumped from wells in the younger and older alluvium in the Huichica and Glen Ellen formations. and in the Sonoma volcanics. The principal aquifers are the younger and older alluvium. but appreciable quantities of water are pumped locally from the Sonoma volcanics. The Huichica and Glen Ellen formations yield water in small quantities and at most places supply water only for limited domestic uses. The younger alluvium COIM3ists of interbedded deposits of unconsolidated gravel. sand, silt. and. locally, peat. These deposits underlie the flood plains and channels of the Napa River. Sonoma Creek, and their tributaries, low alluvial fans or plains graded to these streams. and the tidal marshlands. The older alluvium of Napa and Sonoma Valleys is composed of lenticular deposits of unconsolidated and poorly sorted clay, silt. sand. and gravel. Where exposed, claypan or hardpan soil is characteristically developed at the surface. The Huichica formation is composed of deformed continental beds consisting mostly of yellow silt with some interbedded lenses of silt and gravel, and silt and boulders. At the base are beds of redeposited volcanic material, silt, clay, and lenses of coarse gravel and boulders. The Glen Ellen fcrmation consists of alluvial clay, silt, sand, and gravel in clearly stratified but generally lenticular beds. The Sonoma volcanics constitute a thick and highly variate series of continental volcanic rocks, including andesite, basalt, and minor rhyolite flows and interbedded coarse- to fine-grained pyroclastic tuff and breccia, redeposited tuff and pumice, and diatomaceous mud, silt, and sand. A prominent body of rhyolite flows and tuff with some obsidian and perlitic glass, called the St. Helena rhyolite member, occurs in the upper part. Estimated ground-water pumpage for all uses in the year 1949-50 was about 5,600 acre-feet in Napa Valley and about 2,400 acre-feet in Sonoma Valley. Of this quantity the amounts pumped for irrigation were about 2,900 and 1,900 acre-feet, respectively. Water levels in wells in the central parts of the valleys range from a few feet above the land surface to about 50 feet below, with an average of about 25 feet. The quality of the water in most wells is satisfactory for domestic use and irrigation. Locally at the southern end of the valley some contamination of the native waters is caused by the movement of salty wate

Water Supply Paper↗

Composition and variation of noise recorded at the Yellowknife Seismic Array, 1991-2007

We analyze seismic noise recorded on the 18 short-period, vertical component seismometers of the Yellowknife Seismic Array (YKA). YKA has an aperture of 23 km and is sited on cratonic lithosphere in an area with low cultural noise. These properties make it ideal for studying natural seismic noise at periods of 1-3 s. We calculated frequency-wave number spectra in this band for over 6,000 time windows that were extracted once per day for 17 years (1991-2007). Slowness analysis reveals a rich variety of seismic phases originating from distinct source regions: R g waves from the Great Slave Lake; L g waves from the Atlantic, Pacific, and Arctic Oceans; and teleseismic P waves from the north Pacific and equatorial mid-Atlantic regions. The surface wave energy is generated along coastlines, while the body wave energy is generated at least in part in deep-water, pelagic regions. Surface waves tend to dominate at the longer periods and, just as in earthquake seismograms, L g is the most prominent arrival. Although the periods we study are slightly shorter than the classic double-frequency microseismic band of 4-10 s, the noise at YKA has clear seasonal behavior that is consistent with the ocean wave climate in the Northern Hemisphere. The temporal variation of most of the noise sources can be well fit using just two Fourier components: yearly and biyearly terms that combine to give a fast rise in microseismic power from mid-June through mid-October, followed by a gradual decline. The exception is the R g energy from the Great Slave Lake, which shows a sharp drop in noise power over a 2-week period in November as the lake freezes. The L g noise from the east has a small but statistically significant positive slope, perhaps implying increased ocean wave activity in the North Atlantic over the last 17 years. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

Spatial variability of CO2 concentrations and biogeochemistry in the Lower Columbia River

Carbon dioxide (CO 2 ) emissions from rivers and other inland waters are thought to be a major component of regional and global carbon cycling. In large managed rivers such as the Columbia River, contemporary ecosystem changes such as damming, nutrient enrichment, and increased water residence times may lead to reduced CO 2 concentrations (and emissions) due to increased primary production, as has been shown in another large North American river (Upper Mississippi). In this work, spatial patterns of water quality, including dissolved CO 2 concentrations, were assessed in the Lower Columbia River (LCR) and major tributaries using underway measurements from a small research vessel during July 2016. We observed near-equilibrium CO 2 conditions and overall weak supersaturation of CO 2 in the main channel (average 133.8% saturation) and tributaries. We observed only weak correlations between CO 2 saturation, chlorophyll a fluorescence, and turbidity, thus not strongly supporting our hypothesis of primary productivity controls. In general, the LCR was clear (low turbidity, mean = 1.48 FNU) and had low chlorophyll fluorescence (mean = 0.177 RFU) during the sampling period. As a whole, the LCR was homogeneous with respect to biogeochemical conditions and showed low spatial variability at >100 km scales. Overall, we find that the LCR is likely a weak summertime source of CO 2 to the atmosphere, in line with findings from other altered rivers such as the Upper Mississippi.

Columbia River↗

Sediment quality in Burlington Harbor, Lake Champlain, U.S.A.

Surface samples and cores were collected in 1993 from the Burlington Harbor region of Lake Champlain. Sediment samples were analyzed for trace metals (cadmium, copper, lead, nickel, silver and zinc), simultaneously extracted metal/acid volatile sulfide (SEM-AVS), grain size, nutrients (carbon and nitrogen) and organic contaminants (polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)). The concentrations of cadmium, copper, silver and zinc from the partial sediment digestion of the surface samples correlated well with each other (r2 > 0.60) indicating that either a common process, or group of processes determined the sediment concentrations of these metals. In an analysis of the spatial distribution of the trace metals and PAHs, high surficial concentrations were present in the southern portion of the Harbor. The trace metal trend was strengthened when the concentrations were normalized by grain size. A sewage treatment plant outfall discharge was present in the southeastern portion of the Harbor at the time of this study and is the major source of trace metal and PAH contamination. Evaluation of sediment cores provides a proxy record of historical trace metal and organic inputs. The peak accumulation rate for copper, cadmium, lead, and zinc was in the late 1960s and the peak silver accumulation rate was later. The greatest accumulation of trace metals occurred in the late 1960s after discharges from the STP began. Subsequent declines in trace metal concentrations may be attributed to increased water and air regulations. The potential toxicity of trace metals and organic contaminants was predicted by comparing contaminant concentrations to benchmark concentrations and potential trace metal bioavailability was predicted with SEM-AVS results. Surface sample results indicate lead, silver, ???PAHs and ???PCBs are potentially toxic and/or bioavailable. These predictions were supported by studies of biota in the Burlington Harbor watershed. There is a clear trend of decreasing PAH and trace metal contaminant concentrations with distance from the STP outfall.Surface samples and cores were collected in 1993 from the Burlington Harbor region of Lake Champlain. Sediment samples were analyzed for trace metals (cadmium, copper, lead, nickel, silver and zinc), simultaneously extracted metal/acid volatile sulfide (SEM-AVS), grain size, nutrients (carbon and nitrogen) and organic contaminants (polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)). The concentrations of cadmium, copper, silver and zinc from the partial sediment digestion of the surface samples correlated well with each other (r2>0.60) indicating that either a common process, or group of processes determined the sediment concentrations of these metals. In an analysis of the spatial distribution of the trace metals and PAHs, high surficial concentrations were present in the southern portion of the Harbor. The trace metal trend was strengthened when the concentrations were normalized by grain size. A sewage treatment plant outfall discharge was present in the southeastern portion of the Harbor at the time of this study and is the major source of trace metal and PAH contamination. Evaluation of sediment cores provides a proxy record of historical trace metal and organic inputs. The peak accumulation rate for copper, cadmium, lead, and zinc was in the late 1960s and the peak silver accumulation rate was later. The greatest accumulation of trace metals occurred in the late 1960s after discharges from the STP began. Subsequent declines in trace metal concentrations may be attributed to increased water and air regulations. The potential toxicity of trace metals and organic contaminants was predicted by comparing contaminant concentrations to benchmark concentrations and potential trace metal bioavailability was predicted with SEM-AVS results. Surface sample results indicate lead, silver, ??PAHs and ??PCBs are potentially toxic and/or bi

Water, Air, & Soil Pollution↗

Assessing and implementing the concept of Blue Economy in Laurentian Great Lakes fisheries: Lessons from coupled human and natural systems

Inland fisheries often receive little to no attention in global discussions about sustainable development. The consequences of overlooking inland fisheries in sustainability dialogues are increasingly problematic as fisheries stressors (e.g., overharvest, species invasion, climate change, habitat modification) intensify. Elevating the global profile of inland fisheries requires an approach for quantifying and clearly conveying the ecological, economic, and societal values of these systems. One such approach involves the Blue Economy, a multifaceted concept initially used to describe the intersection of marine conservation and sustainable use of marine resources for economic growth. Although conceptually powerful, the Blue Economy has rarely been applied to inland waters and fisheries. To address this knowledge gap, we conceptualized Laurentian Great Lakes fisheries from a Blue Economy perspective. In particular, we evaluated the utility of the coupled human and natural systems (CHANS) framework for characterizing the ecological, economic, and societal values of Laurentian Great Lakes fisheries and associated contributions to the Blue Economy (e.g., human livelihoods, food security, recreation, conservation, economic prosperity). There are numerous opportunities to leverage CHANS methods (e.g., metacoupling, telecoupling) and associated mathematical models to advance fisheries science, inform fisheries management, and ultimately move toward a Blue Economy in the Laurentian Great Lakes. To that end, we demonstrated applications of CHANS methods, discussed strategies for communicating with stakeholders, and provided insights for navigating challenges to developing a Blue Economy in the Laurentian Great Lakes—a model that could be used in the African Great Lakes and other large ecosystems in the world.

Laurentian Great Lakes↗

Spawning distribution of sockeye salmon in a glacially influenced watershed: The importance of glacial habitats

The spawning distribution of sockeye salmon Oncorhynchus nerka was compared between clear and glacially turbid habitats in Lake Clark, Alaska, with the use of radiotelemetry. Tracking of 241 adult sockeye salmon to 27 spawning locations revealed both essential habitats and the relationship between spawn timing and seasonal turbidity cycles. Sixty-six percent of radio-tagged sockeye salmon spawned in turbid waters (???5 nephelometric turbidity units) where visual observation was difficult. Spawning in turbid habitats coincided with seasonal temperature declines and associated declines in turbidity and suspended sediment concentration. Because spawn timing is heritable and influenced by temperature, the observed behavior suggests an adaptive response to glacier-fed habitats, as it would reduce embryonic exposure to the adverse effects of fine sediments. ?? Copyright by the American Fisheries Society 2007.

Transactions of the American Fisheries Society↗

Analysis of groundwater response to tidal fluctuations, Operable Unit 2, Area 8, Naval Base Kitsap, Keyport, Washington

Operable Unit 2, Area 8, at Naval Base Kitsap, Keyport is the site of a former chrome-plating facility that released metals (primarily chromium and cadmium), chlorinated volatile organic compounds, and petroleum compounds into the local environment. To ensure long-term protectiveness, as stipulated in the Fourth Five-Year Review for the site, Naval Facilities Engineering Command Northwest collaborated with the U.S. Environmental Protection Agency, the Washington State Department of Ecology, and the Suquamish Tribe, to collect data to monitor the contamination left in place and to ensure the site does not pose a risk to human health or the environment. To support these efforts, refined information was needed on the interaction of fresh groundwater with seawater in response to the up-to 13-ft tidal fluctuations at this nearshore site adjacent to Port Orchard Bay. The information was analyzed to meet the primary objective of this investigation, which was to determine the optimal time during the semi-diurnal and the neap-spring tidal cycles to sample groundwater for freshwater contaminants in Area 8 monitoring wells. Groundwater levels and specific conductance in five monitoring wells, along with marine water-levels (tidal levels) in Port Orchard Bay, were monitored every 15 minutes during a 3-week duration to determine how nearshore groundwater responds to tidal forcing. Time series data were collected from October 24, 2017, to November 16, 2017, a period that included neap and spring tides. Vertical profiles of specific conductance were also measured once in the screened interval of each well prior to instrument deployment to determine if a freshwater/saltwater interface was present in the well during that particular time. The vertical profiles of specific conductance were measured only one time during an ebbing tide at approximately the top, middle, and bottom of the saturated thickness within the screened interval of each well. The landward-most well, MW8-8, was completely freshwater, while one of the most seaward wells, MW8-9, was completely saline. A distinct saltwater interface was measured in the three other shallow wells (MW8-11, MW8-12, and MW8-14), with the topmost groundwater occurring fresh underlain by higher conductivity water. Lag times between minimum spring-tide level and minimum groundwater levels in wells ranged from about 2 to 4.5 hours in the less-than 20-ft deep wells screened across the water table, and was about 7 hours for the single 48-ft deep well screened below the water table. Those lag times were surprisingly long considering the wells are all located within 200-ft of the shoreline and the local geology is largely coarse-grained glacial outwash deposits. Various manmade subsurface features, such as slurry walls and backfilled excavations, likely influence and confuse the connectivity between seawater and groundwater. The specific-conductance time-series data showed clear evidence of substantial saltwater intrusion into the screened intervals of most shallow wells. Unexpectedly, the intrusion was associated with the neap part of the tidal cycle around November 13–16, when relatively low barometric pressure and high southerly winds led to the highest high and low tides measured during the monitoring period. The data consistently indicated that the groundwater had the lowest specific conductance (was least mixed with seawater) during the prior neap tides around October 30, the same period when the shallow groundwater levels were lowest. Although the specific conductance response is somewhat different between wells, the data do suggest that it is the heights of the actual high-high and low-low tides, regardless of whether or not they occur during the neap or spring part of the cycle, that allows seawater intrusion into the nearshore aquifer at Area 8. With all the data taken into consideration, the optimal time for sampling the shallow monitoring wells at Area 8 would be centered on a 2–5-hour period following the predicted low-low tide during neap tide, with due consideration of local atmospheric pressure and wind conditions that have the potential to generate tides that can be substantially higher than those predicted from lunar-solar tidal forces. The optimal time for sampling the deeper monitoring wells at Area 8 would be during the 6–8-hour period following a predicted low-low tide, also during the neap tide part of the tidal cycle. The specific time window to sample each well following a low tide can be found in table 5. Those periods are when groundwater in the wells is most fresh and least diluted by seawater intrusion. In addition to timing, consideration should be given to collecting undisturbed samples from the top of the screened interval (or top of the water table if below the top of the interval) to best characterize contaminant concentrations in freshwater. A downhole conductivity probe could be used to identify the saltwater interface, above which would be the ideal depth for sampling.

Washington↗

Inventory and Statistical Analysis of Sediment Data for Streams in Kentucky, 1950-2008

Suspended sediment is a constituent of water that is monitored because of concerns about accelerated erosion, nonpoint contamination of water resources, and degradation of aquatic environments. Understanding the availability of monitored sediment data for streams in Kentucky is critical to planning future modeling and monitoring efforts. In order to assess the availability of sediment data for Kentucky, long-term records were obtained from the National Water Information System (NWIS) of the U.S. Geological Survey (USGS). Suspended-sediment concentration (SSC), the parameter traditionally measured and reported by the USGS, was statistically compared to turbidity and total suspended solids (TSS), two parameters that are considered surrogate data. Coincident observations of SSC with either turbidity or TSS were available for 42 sites. In combination with instantaneous streamflow, turbidity and TSS both proved to be significant indicators of SSC when data from all sites were used. Because of the perceived link between sediment and nutrient abundance in streams, sediment-parameter data at these sites were correlated to total-nitrogen and total-phosphorus concentrations. A significant relation (p-value < 0.05) was found between monitored nutrient concentrations and coincident sediment abundance, although there were no clear linear relations. This compilation of data showed that SSC was monitored at 118 sites in Kentucky at some time between 1950 and 2008. As of March 2008, 9 sites were monitored for SSC in Kentucky (8 of which are new) down from a high of more than 60 SSC sites during the 1980s. Of these 118 SSC sites, 21 sites were also monitored for TSS; there are coincident records for both SSC and TSS at 6 sites. Forty-seven of these long-term water-quality sites were also monitored for turbidity; there are coincident records for SSC and turbidity at 42 sites, including all of those at which there are coincident data for TSS. The number of sites at which SSC and at least one other sediment parameter (TSS or turbidity) were monitored decreased from a high of 27 in 1987 to zero during the period 2001-2005.

Scientific Investigations Report↗