USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
USGS1998

Effects of management practices on grassland birds: Chestnut-collared Longspur

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird ( Molothrus ater ) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species' nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species' response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species' breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; for a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management, use the Grassland and Wetland Birds Bibliography on the home page of this resource.

Report↗
USGS1999

Effects of management practices on grassland birds: Burrowing Owl

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species' nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species' response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species' breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; for a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management, use the Grassland and Wetland Birds Bibliography on the home page of this resource.

Report↗
USGS1999

Effects of management practices on grassland birds: Bobolink

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species' nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species' response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species' breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; for a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management, use the Grassland and Wetland Birds Bibliography on the home page of this resource.

Report↗
USGS1998

Effects of management practices on grassland birds: Baird's Sparrow

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species' nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species' response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species' breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; for a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management, use the Grassland and Wetland Birds Bibliography on the home page of this resource.

Report↗
USGS1999

Effects of management practices on grassland birds: American Bittern

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird ( Molothrus ater ) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species' nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species' response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species' breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; for a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management, use the Grassland and Wetland Birds Bibliography on the home page of this resource.

Report↗
USGS2026

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews↗
USGS2007

Correcting acoustic Doppler current profiler discharge measurement bias from moving-bed conditions without global positioning during the 2004 Glen Canyon Dam controlled flood on the Colorado River

Discharge measurements were made by acoustic Doppler current profiler at two locations on the Colorado River during the 2004 controlled flood from Glen Canyon Dam, Arizona. Measurement hardware and software have constantly improved from the 1980s such that discharge measurements by acoustic profiling instruments are now routinely made over a wide range of hydrologic conditions. However, measurements made with instruments deployed from moving boats require reliable boat velocity data for accurate measurements of discharge. This is normally accomplished by using special acoustic bottom track pings that sense instrument motion over bottom. While this method is suitable for most conditions, high current flows that produce downstream bed sediment movement create a condition known as moving bed that will bias velocities and discharge to lower than actual values. When this situation exists, one solution is to determine boat velocity with satellite positioning information. Another solution is to use a lower frequency instrument. Discharge measurements made during the 2004 Glen Canyon controlled flood were subject to moving-bed conditions and frequent loss of bottom track. Due to site conditions and equipment availability, the measurements were conducted without benefit of external positioning information or lower frequency instruments. This paper documents and evaluates several techniques used to correct the resulting underestimated discharge measurements. One technique produces discharge values in good agreement with estimates from numerical model and measured hydrographs during the flood. ?? 2007, by the American Society of Limnology and Oceanography, Inc.

Limnology and Oceanography: Methods↗
USGS2006

Development and implementation of software systems for imaging spectroscopy

Specialized software systems have played a crucial role throughout the twenty-five year course of the development of the new technology of imaging spectroscopy, or hyperspectral remote sensing. By their very nature, hyperspectral data place unique and demanding requirements on the computer software used to visualize, analyze, process and interpret them. Often described as a marriage of the two technologies of reflectance spectroscopy and airborne/spaceborne remote sensing, imaging spectroscopy, in fact, produces data sets with unique qualities, unlike previous remote sensing or spectrometer data. Because of these unique spatial and spectral properties hyperspectral data are not readily processed or exploited with legacy software systems inherited from either of the two parent fields of study. This paper provides brief reviews of seven important software systems developed specifically for imaging spectroscopy.

Conference Paper↗
USGS1988

Specific conductance; theoretical considerations and application to analytical quality control

This report considers several theoretical aspects and practical applications of specific conductance to the study of natural waters. A review of accepted measurements of conductivity of secondary standard 0.01 N KCl solution suggests that a widely used algorithm for predicting the temperature variation in conductivity is in error. A new algorithm is derived and compared with accepted measurements. Instrumental temperature compensation circuits based on 0.01 N KCl or NaCl are likely to give erroneous results in unusual or special waters, such as seawater, acid mine waters, and acid rain. An approach for predicting the specific conductance of a water sample from the analytically determined major ion composition is described and critically evaluated. The model predicts the specific conductance to within ?8 percent (one standard deviation) in waters with specific conductances of 0 to 600 microS/cm. Application of this approach to analytical quality control is discussed.

Water Supply Paper↗
USGS2017

Rhenium

Rhenium is one of the rarest elements in Earth’s continental crust; its estimated average crustal abundance is less than 1 part per billion. Rhenium is a metal that has an extremely high melting point and a heat-stable crystalline structure. More than 80 percent of the rhenium consumed in the world is used in high-temperature superalloys, especially those used to make turbine blades for jet aircraft engines. Rhenium’s other major application is in platinum-rhenium catalysts used in petroleum refining. Rhenium rarely occurs as a native element or as its own sulfide mineral; most rhenium is present as a substitute for molybdenum in molybdenite. Annual world mine production of rhenium is about 50 metric tons. Nearly all primary rhenium production (that is, rhenium produced by mining rather than through recycling) is as a byproduct of copper mining, and about 80 percent of the rhenium obtained through mining is recovered from the flue dust produced during the roasting of molybdenite concentrates from porphyry copper deposits. Molybdenite in porphyry copper deposits can contain hundreds to several thousand grams per metric ton of rhenium, although the estimated rhenium grades of these deposits range from less than 0.1 gram per metric ton to about 0.6 gram per metric ton. Continental-arc porphyry copper-(molybdenum-gold) deposits supply most of the world’s rhenium production and have large inferred rhenium resources. Porphyry copper mines in Chile account for about 55 percent of the world’s mine production of rhenium; rhenium is also recovered from porphyry copper deposits in the United States, Armenia, Kazakhstan, Mexico, Peru, Russia, and Uzbekistan. Sediment-hosted strata-bound copper deposits in Kazakhstan (of the sandstone type) and in Poland (of the reduced-facies, or Kupferschiefer, type) account for most other rhenium produced by mining. These types of deposits also have large amounts of identified rhenium resources. The future supply of rhenium is likely to depend largely on the capacity of the specialized processing facilities needed to recover rhenium from molybdenite concentrates. The environmental consequences of rhenium recovery are closely linked to the consequences of mining large porphyry copper and strata-bound copper deposits; no additional environmental impact from recovery of rhenium from these deposits has been identified. No information is available regarding the potential toxic effects of rhenium on humans, partly because of the low natural abundance of rhenium.

Professional Paper↗
USGS1998

Measurements of coastal storm surge by the U.S. Geological Survey

In the wake of a storm, local, state, and federal emergency planners needed storm surge elevation data as quickly as possible. These data are used by officials to decide what areas are in the greatest need of assistance and what areas qualify for special designations. To accelerate the pace at which storm surge data can be gathered and released, the US geological survey (USGC) has established a network of coastal water elevation gages that are linked to satellite networks. These data are made available in real-time on the World Wide Web. While Internet access is usually fast and reliable, this process can be augmented by cellular phone, two-way radio, and other data communication techniques.

Conference Paper↗
USGS1981

Hard mineral resources around the U.S continental margin

The territorial waters surrounding the United States contain vast quantities of hard mineral resources. Some, such as sand and gravel in the New York Bight, Beaufort Sea, portions of southern California, and submerged lands near Hawaii are relatively well known and characterized by local need and immediate mining potential with available technology. Commoditie of interest to industry and having nearterm economic potential that might require new or innovative technology, inlcude phosphorites such as those in the south eastern Atlantic margin, and manganese nodules on the Blake Plateau (which have potential for catalyst material, manganese, cobalt, nickel, and platinum). Commodities having significant potential, but which are poorly known and which may require innovative recovery technology, include chrome, gold, platinum, and tin placer deposits, with special emphasis on the continental margins of northern California, Oregon, Washington, and Alaska; rock salt and evaporite minerals in the Gulf of Mexico and Atlantic; titanium and other heavy minerals in the Atlantic continental margin, and calcium carbonate. A. U.S. Department of the Interior moratorium on offshore leasing in federal waters has existed since 1968. Leasing and regulatory systems will be required to begin commercial mining or intensive exploration of the above resources

Conference Paper↗
USGS1973

Bird collections in the United States and Canada

This survey was initiated in 1966 as a project of a subcommittee of the A.O.U.'s Committee on Research, at that time chaired by Paul H. Baldwin. The subcommittee consisted of the authors and Ralph J. Raitt. In 1968 the project was separated from the Committee on Research and the temporary Committee on Collections was established, with the present authors as its members. This paper is the final report of the committee. In the past, many studies utilizing museum materials have been handicapped by ignorance of the existence of potentially important specimens. We hoped, by means of this survey, to enable future workers to take full advantage of all available material. The objectives of the survey were to determine the locations of collections of ornithological material with research potential, particularly skins, skeletons, fluid-preserved specimens, eggs, and nests; to assess the sizes and particular geographic or systematic strengths of the various collections; to locate former private collections; to learn what collections include holotypes, and who is responsible for the collections. These basic points are generally well-known for the larger institutions that specialize in maintaining research collections, but not for many smaller collections containing valuable material. The survey was inspired by and patterned after a series made of mammal collections (see Anderson et al. 1963, J. Mammal. 44: 471-500).

The Auk↗
USGS2012

Monitoring on Xi'an ground fissures deformation with TerraSAR-X data

Owing to the fine resolution of TerraSAR-X data provided since 2007, this paper applied 6 TerraSAR data (strip mode) during 3rd Dec. 2009 to 23rd Mar. 2010 to detect and monitor the active fissures over Xi'an region. Three themes have been designed for high precision detection and monitoring of Xi'an-Chang'an fissures, as small baseline subsets (SBAS) to test the atmospheric effects of differential interferograms pair stepwise, 2-pass differential interferogram with very short baseline perpendicular to generate the whole deformation map with 44 days interval, and finally, corner reflector (CR) technique was used to closely monitor the relative deformation time series between two CRs settled crossing two ground fissures. Results showed that TerraSAR data are a good choice for small-scale ground fissures detection and monitoring, while special considerations should be taken for their great temporal and baseline decorrelation. Secondly, ground fissures in Xi'an were mostly detected at the joint section of stable and deformable regions. Lastly, CR-InSAR had potential ability to monitor relative deformation crossing fissures with millimeter precision.

Wuhan Daxue Xuebao (Xinxi Kexue Ban)/Geomatics and↗
USGS2014

Ecological implications of Laurel Wilt infestation on Everglades Tree Islands, southern Florida

There is a long history of introduced pests attacking native forest trees in the United States (Liebhold and others, 1995; Aukema and others, 2010). Well-known examples include chestnut blight that decimated the American chestnut ( Castanea dentata ), an extremely important tree in the eastern United States, both as a food source for wildlife and humans and for the wood; Dutch elm disease that attacks native elms ( Ulmus spp.), including those commonly planted as shade trees along city streets; and the balsam wooly adelgid (Adelges piceae), an insect that is destroying Fraser firs ( Abies fraseri ) in higher elevations of Great Smoky Mountains National Park. Laurel wilt, a fungal disease transmitted by the redbay ambrosia beetle (Xyleborus glabratus), is a 21st-century example of an introduced forest pest that attacks native tree species in the laurel family (Lauraceae) (Mayfield, 2007; Hulcr and Dunn, 2011). The introduction of laurel wilt disease has been traced to the arrival of an Asian ambrosia beetle ( Xyleborus glabratus ) at Port Wentworth, Georgia, near Savannah, in 2002, apparently accidently introduced in wooden shipping material (Mayfield, 2007). Within the next 2 years, it was determined that the non-native wood-boring insect was the vector of an undescribed species of fungus, responsible for killing large numbers of red bay ( Persea borbonia ) trees in the surrounding area. Dispersing female redbay ambrosia beetles drill into live trees and create tunnels in the wood. They carry with them fungal spores in specialized organs called mycangia at the base of each mandible and sow the spores in the tunnels they excavate. The fungus, since named Raffaelea lauricola (Harrington and others, 2008), is the food source for adults and larvae. The introduction of Raffaelea lauricola causes the host plant to react in such a way as to block the vascular tissue, resulting in loss of water conduction, wilt, and death (Kendra and others, 2013). Although first seen in red bay, laurel wilt disease also kills other native trees that are members of the laurel family, including swamp bay ( Persea palustris ), silk bay ( Persea borbonia var. humilis ), and sassafras ( Sassafras albidum ), as well as the economically important cultivated avocado ( Persea americana ) (Fraedrich and others, 2008). This paper is concerned primarily with swamp bay, an important component of Everglades tree islands. The spread of the redbay ambrosia beetle and its fungal symbiont has been very rapid, exceeding model predictions (Koch and Smith, 2008); by 2011, laurel wilt disease was found from the southern coastal plain of North Carolina to southern peninsular Florida. The first redbay ambrosia beetle was trapped in Miami-Dade County in March 2010, and laurel wilt disease was discovered in swamp bays in February 2011 and in commercial avocado groves about a year later (Kendra and others, 2013). By 2013, laurel wilt disease was seen in swamp bays throughout the southern Everglades in Everglades National Park, Big Cypress National Preserve, and Water Conservation Areas (WCAs) 3A and 3B (Rodgers and others, 2014).

Florida↗
USGS2006

The ionospheric impact on GPS performance in southern polar region

The primary objective of this paper is to present the results of the study of the effects of varying ionospheric conditions on the GPS signal tracking in the southern polar region. In the first stage of this study, the data collected by the OSU/USGS team in October-November 2003 within the TAMDEF (Transantarctic Mountains Deformation) network were used together with some IGS Antarctic stations to study the effect of severe ionospheric storms on GPS hardware. Note that TAMDEF is a joint USGS/OSU project with the primary objective of measuring crustal motion in the Transantarctic Mountains of Southern Victoria Land using GPS techniques. This study included ten Antarctic stations equipped with different dual-frequency GPS hardware, and the data were evaluated for two 24-hour periods of severe ionospheric storm (2003/10/29) and moderate ionospheric conditions (minor storm of 2003/11/11). The results of this study were presented at the LAG Assembly in Cairns, Australia (Grejner-Brzezinska et al., 2005). Additional tests, in a more controlled environment, were carried out at the US Antarctic station, McMurdo, between January 10 and February 6, 2006, under varying ionospheric conditions, where several different types of receivers were connected to the same antenna located on the rooftop of the Crary Laboratory (the primary test site). In this scenario, each antenna was subject to identical ionospheric effects during each day of the test, and no spatial decorrelation effects were present, as seen in the previous study, due to the spatial separation of the receivers tested. It should be noted, however, that no moderate or severe ionospheric storms occurred during the experiment, so, unfortunately, this type of conditions was not tested here. The test was repeated with different receivers connected to different antenna types; a total of four 5-day sessions were carried out. The following receiver types were used at the primary site: Trimble 5700, Ashtech Z-Surveyor, JNS Euro-80 and Novatel DL-4, with the following antennas: Trimble Zephyr Geodetic, Ashtech D/M and Ashtech E/M chokering. In addition, data collected by the MCM4 IGS station, MCMD UNAVCO station, and CRAR USGS station, all located within 300 m from the primary test site, were used in the analyses. These stations were equipped with the following receiver/antenna combinations: ADA SNR-12/AOAD/MJT chokering (MCM4), Trimble NETRS/AOAD/MJT chokering (MCMD), and TPS ODYSEY_E/JPSREGANT_DD_E (CRAR). The UNAVCO TEQC software was used to carry out the analyses. Depending on the data sampling rate and the mask angle, the expected numbers of observations per receiver/satellite were compared to the actual number of measurements collected during the ionospheric events, with a special emphasis on L2 data. A total number of cycle slips and losses of lock were computed and compared among the hardware types. The results presented here indicate that there is no significant effects on the GPS receivers during minor ionospheric storms (Kp<5). However, the results reported in ibid, indicate significant differences in the hardware performance under severe ionospheric storms. Thus, careful hardware selection is needed to assure data quality/continuity when observations may be affected by severe ionospheric disturbances, while under calm to minor ionospheric activity level there is no significant difference in performance among the hardware tested here.

Conference Paper↗
USGS1992

Progress report on the Worldwide Earthquake Risk Management (WWERM) Program

Considerable progress has been made in the Worldwide Earthquake Risk Management (WWERM) Program since its initiation in late 1989 as a cooperative program of the Agency for International Development (AID), Office of U.S. Foreign Disaster Assistance (OFDA), and the U.S. Geological Survey. Probabilistic peak acceleration and peak Modified Mercalli intensity (MMI) maps have been prepared for Chile and for Sulawesi province in Indonesia. Earthquake risk (loss) studies for dwellings in Gorontalo, North Sulawesi, have been completed and risk studies for dwellings in selected areas of central Chile are underway. A special study of the effect of site response on earthquake ground motion estimation in central Chile has also been completed and indicates that site response may modify the ground shaking by as much as plus or minus two units of MMI. A program for the development of national probabilistic ground motion maps for the Philippines is now underway and pilot studies of earthquake ground motion and risk are being planned for Morocco.

Conference Paper↗
USGS1979

Digital image processing system For Landsat 3

The Department of Interior (DOI) and the National Aeronautics and Space Administration (NASA) have entered into a joint program to provide a digital image processing system in support of the Landsat 3 mission. NASA will provide the data reception and pre-processing facilities, while the DOI provides the production image processing system that generates film products and computer compatible tapes for users. The system procured by the DOI's U.S. Geological Survey was installed at the Earth Resources Observation System Data Center (EDC) in Sioux Falls, South Dakota. The EDC Digital Image Processing System (EDIPS) is capable of operating in standard or special formats. During 13 hours of operation, the system can process up to 200 five-band Multispectral Scanner (MSS) scenes and 160 Return Beam Vidicon (RBV) subscenes in the standard mode plus up to 60 scenes/subscenes in the special-order mode. The input media for the system are High Density Tapes (HDT's) generated by NASA's Goddard Space Flight Center (GSFC). These tapes contain two types of data: those that have been radiometrically and geometrically corrected with resampling of the data to fit a known map projection, and those that have been radiometrically corrected but have not been geometrically corrected or resampled. The system can provide 185 mm (MSS) and 198 mm (RBV) black and white film products for each MSS band or RBV subscene via a high resolution laser beam recorder. The CCT's generated by the system are compatible with the HDT format, and are available either in Band Sequential (BSQ) or Band Interleaved by Line (BIL) data. This paper will present both an overview of the total NASA/DOI system and a detailed discussion of the EDC Digital Image Processing System that is installed at the USGS facility in Sioux Falls, South Dakota.

South Dakota↗