Occurrence of pesticides in ground water of the North Platte Natural Resources District, Nebraska, 2002
Explore the source record for details and available documents.
Fact Sheet↗
SEARCH · USGS Science
Results for “Nature Water”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Front Range Infrastructure Resources project
Project goal: To provide the public and decision makers with objective information about the location and characteristics of land, natural aggregate, water, and energy resources that are vital to sustaining an area and its infrastructure.
Colorado;Wyoming↗
Cuyama Valley, California hydrologic study: An assessment of water availability
Water resources are under pressure throughout California, particularly in agriculturally dominated valleys. Since 1949, the Cuyama Valley’s irrigated acreage has increased from 13 to 35 percent of the valley. Increased agriculture has contributed to the demand for water beyond natural recharge. The tools and information developed for this study can be used to help understand the Cuyama Valley aquifer system, an important resource of Santa Barbara County.
California↗
Water resources of the Bighorn basin, northwestern Wyoming
This 2-sheet map report includes the part of the Bighorn Basin and adjacent mountains in northwestern Wyoming. Water-bearing properties of the geologic units are summarized. The hydrogeologic map illustrates the distribution of wells in the different units and gives basic data on the yields of wells, depth of wells, depth to water, and dissolved solids and conductance of the water. Aquifers capable of yielding more than 1,000 gpm (gallons per minute) underlie the area everywhere, except in the mountains on the periphery of the basin. In 1970, approximately 29,500 of the 40,475 people living in the Bighorn Basin were served by municipal water supplies. The municipal supply for about 6,300 of these people was from ground water. The natural flows of streams in the Bighorn Basin differ greatly due to a wide range in the meteorologic, topographic, and geologic conditions of the basin. The station locations and the average discharge per square mile are shown on the map and give an indication of the geographic variation of basin yields. The maximum instantaneous discharge that has occurred at each station during its period of record is shown. Most of the runoff in the basin is from snowmelt in the mountains.
Wyoming↗
Soil data at sites near Geneva Lake, Lake Geneva, Wisconsin, and Long Lake, near New Auburn, Wisconsin
The goals of this project are to describe how water moves through shallow soil and how vegetated buffers influence this flow. This was accomplished by using a series of soil-moisture probes which track the lateral and vertical movement of water during natural and artificial rainfall/runoff events. The purpose of this report is to summarize soil-moisture data collected at near-shore areas adjacent to two Wisconsin lakes.
Open-File Report↗
Impact of mine and natural sources of mercury on water, sediment, and biota in Harley Gulch adjacent to the Abbott-Turkey Run mine, Lake County, California
Executive Summary Stable-isotope data indicate that there are three sources of water that effect the composition and Hg concentration of waters in Harley Gulch: (1) meteoric water that dominates water chemistry during the wet season; (2) thermal water effluent from the Turkey Run mine that effects the chemistry at sample site HG1; and (3) cold connate groundwater that dominates water chemistry during the dry season as it upwells and reaches the surface. The results from sampling executed for this study suggest four distinct areas in Harley Gulch: (1) the contaminated West Fork of Harley Gulch, consisting of the stream immediately downstream from the mine area and the wetlands upstream from Harley Gulch canyon (sample sites HG1-HG2, (2) the East Fork of Harley Gulch, where no mining has occurred (sample site HG3), (3) sample sites HG4-HG7, where a seasonal influx of saline groundwater alters stream chemistry, and (4) sample sites HG7-HG10, downstream in Harley Gulch towards the confluence with Cache Creek. West Fork: Mine Area and Wetlands The concentration of Hg in both storm sediment and active channel sediment was highest at sample site HG1, immediately downstream from the mine. The highest concentrations of total Hg (Hg T ) in water also occurred at site HG1, and they decreased systematically downstream from the mine. The high concentration of HgT at site HG1 reflects input of thermal-water effluent from the Turkey Run mine which comprises most of the flow at this site during the dry season. During the May 2011 low-flow sampling, Hg T concentration was very high at site HG1, but the maximum in HgT concentration occurred at sample site HG1.5 in the middle of the wetland area. The high concentration of Hg T and isotopic chemistry at this site indicates that a significant input of connate groundwater into the creek at this location contributes to the high Hg concentration in water. At site HG1, just downstream from the thermal water input from the Turkey Run mine, water sampled in June 2010 was almost entirely composed of thermal-water effluent. During the storm sampling in March 2011, which resulted in the highest flows of the winter, thermal effluent was virtually undetectable at site HG1, and the water was all meteoric. During the May 2011 sampling event, the input of connate groundwater in the middle of the wetland area at site HG1.5 was dominant. Discharge from the adit and runoff from the mine contributes to the high Hg concentration at site HG1 under both high and low-flow conditions. East Fork: Background Hg levels in waters collected from the East Fork of Harley Gulch, where no mining has occurred, were as high as 32.8 parts per trillion (pptr). These levels of Hg in water are significantly higher than regional background Hg concentrations, which range from 4-7 pptr. These anomalous Hg concentrations are partially explained by the abundance of Hg-enriched groundwater in Harley Gulch. Sites HG4-HG7 Downstream from the wetland, the aqueous concentration of HgT decreased, but remained above background levels as another input of connate groundwater occurs in the creek segment between sample sites HG4 and HG7. The input of connate groundwater in this segment of the creek is reflected in the increase in dissolved constituents characteristic of the connate groundwater, such as sulfate (SO4), chloride (Cl) and magnesium (Mg). Stable-isotope data for heavy isotopes d18O and d2D also confirm two areas of input of connate groundwater into Harley Gulch: the creek segment in the West Fork near sample site HG1.5 and the segment between sample sites HG4 and HG7. Downstream from the second area of input of connate groundwater, both HgF and Hg T concentrations decrease similarly, but the percentage of Hg in the filtered fraction increases. The decreases in HgT and HgF between sample sites HG5 and HG7 suggests that this second source of connate groundwater to Harley Gulch is distinct from the Hg-enriched source that enters the middle of the wetlands at sample site HG1.5. During low-flow conditions in June 2010, input of connate groundwater increased from sample site HG4 and reached a maximum near sample site HG7, where it dominated creek water chemistry. Waters collected from sample site HG7 during the June 2010 sampling event were the heaviest isotopically and contained high concentrations of Cl and SO4, constituents that are characteristically high in the connate groundwater. Both above and below sample site HG7, the amount of connate groundwater in the creek water decreased. Sites HG8-HG10 Sediment with high Hg concentration is present throughout the West Fork of Harley Gulch below the mine and in the upper part of the Harley Gulch main stem to just above sample site HG10. At the sample site furthest downstream, HG10, Hg concentration is at background levels, as are cobalt (Co), nickel (Ni), and tungsten (W), indicating that the sediment is not significantly contaminated with Hg from the mine.
California↗
Multi-elemental analysis of aqueous geochemical samples by quadrupole inductively coupled plasma-mass spectrometry (ICP-MS)
Typically, quadrupole inductively coupled plasma-mass spectrometry (ICP-MS) is used to determine as many as 57 major, minor, and trace elements in aqueous geochemical samples, including natural surface water and groundwater, acid mine drainage water, and extracts or leachates from geological samples. The sample solution is aspirated into the inductively coupled plasma (ICP) which is an electrodeless discharge of ionized argon gas at a temperature of approximately 6,000 degrees Celsius. The elements in the sample solution are subsequently volatilized, atomized, and ionized by the ICP. The ions generated are then focused and introduced into a quadrupole mass filter which only allows one mass to reach the detector at a given moment in time. As the settings of the mass analyzer change, subsequent masses are allowed to impact the detector. Although the typical quadrupole ICP-MS system is a sequential scanning instrument (determining each mass separately), the scan speed of modern instruments is on the order of several thousand masses per second. Consequently, typical total sample analysis times of 2–3 minutes are readily achievable for up to 57 elements.
Open-File Report↗
U.S. Geological Survey — Department of the Interior Region 11, Alaska—2019 annual science report
In keeping with our national mission, the USGS in Alaska provides timely and objective scientific information to help the Nation address issues and solve problems in five major topical areas (listed alphabetically): Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Wildlife, Fish, and Habitat. The USGS in Alaska engages about 400 scientists and support staff working in three major science centers, Cooperative Research Units, and USGS centers outside Alaska, with a combined annual science budget of about $60 million. In just the last 5 years, the USGS in Alaska has produced scientific benefits resulting from more than 1,000 publications and about 250 technical reports. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.er.usgs.gov/search?q=Alaska .
Alaska↗
U.S. Geological Survey—Department of the Interior Region 11, Alaska —2020 annual science report
U.S. Geological Survey (USGS) Mission: The USGS national mission is to monitor, analyze, and predict current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision-makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five inter-connected themes: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in three Alaska-based science centers, a Cooperative Research Unit, and USGS centers outside Alaska, with a combined annual science budget of about $60 million. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 1,100 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.er.usgs.gov/search?q=Alaska .
Alaska↗
Capacity assessment for Earth Monitoring, Analysis, and Prediction (EarthMAP) and future integrated monitoring and predictive science at the U.S. Geological Survey
Executive Summary Managers of our Nation’s resources face unprecedented challenges driven by the convergence of increasing, competing societal demands and a changing climate that affects the stability, vulnerability, and predictability of those resources. To help meet these challenges, the scientific community must take advantage of all available technologies, data, and integrative Earth systems modeling capacity to better inform resource and risk management decisions. This is the overarching goal of the U.S. Geological Survey (USGS) Earth Monitoring, Analysis, and Prediction (EarthMAP) vision: “By 2030, the USGS will deliver well integrated observations and predictions of the future state of natural systems—water, ecosystems, energy, minerals, hazards—at regional and national scales, working primarily with federal, state, and academic partners to develop and operate the capability” (U.S. Geological Survey, 2021). Providing more integrated Earth systems science and actionable information to decision makers, stakeholders, and the public requires a better understanding of the depth and distribution of existing capacity (capabilities, tools, and techniques) across the Bureau. Identifying existing capacity is also a critical first step toward gap analysis and targeted investments to increase capacity over time. The USGS formed a Capacity Assessment Team (CAT) and charged it with (1) conducting a Request for Information (RFI) to identify existing USGS expertise and activities supportive of integrated and predictive science to inform decision making, (2) developing a strategy and proof-of-concept for a continuously updated capacity assessment capability, and (3) identifying lessons learned to inform development of best practices for future capacity assessment efforts. The RFI took the form of a survey, with content guided by the science and technology needs identified in a USGS report titled “Grand Challenges for Integrated U.S. Geological Survey Science—A Workshop Report” (Jenni and others, 2017). The 44-question survey provided respondents the ability to rate their level of experience with a suite of priority disciplines, analysis and modeling approaches, technologies, and stakeholder engagement strategies and to enter optional narrative text for supporting context. An introductory portion focused on general science capacity assessment, followed by three sections targeting capabilities related to the foundational components of EarthMAP: (1) data and information integration, (2) integrated predictive science, and (3) actionable information. The survey results provided a high-level snapshot of USGS capacity in the targeted areas. Respondents (1,035 individuals) represented approximately 13 percent of the USGS across all mission areas and regions. Seventy-four percent of the respondents held a science-focused position title and the remainder had position titles in information technology, computer science, management, administrative, or other (contractors, volunteers, emeritus, and unknown). To provide greater insight into respondent capabilities and activities, information from the U.S. Department of the Interior and USGS enterprise information systems were used to further characterize topical expertise and organizational associations of survey respondents. To address the ongoing need to assess the Bureau’s capacity to address integrated predictive science priorities, the CAT developed a software-based proof-of-concept called the Integrated Science Assessment Information Database (iSAID) for assembling various information sources together toward making the full extent of USGS capabilities and scientific assets available for routine capacity assessment. This proof-of-concept is intended to serve as a catalyst for further development. The process of implementing the EarthMAP capacity assessment survey, analyzing survey responses, and developing the proof-of-concept resulted in lessons learned, findings, and recommendations. Example scenarios throughout the report demonstrate how capacity assessment data can inform science planning. Three overarching findings and recommendations are: (1) Finding: Capacity is limited in some critical disciplines, skills, and technology applications, but “sufficient” depends on the question and the need relative to availability at a given point in time. Recommendation: Develop an on-demand capacity assessment framework that enables rapid identification and evaluation of existing and available expertise to support decision needs as they arise. (2) Finding: Institutional barriers and lack of awareness constrain the ability of USGS staff to adopt new technologies, collaborate across administrative boundaries, and deliver actionable information to stakeholders in a timely manner. However, these barriers are not universally experienced. Recommendation: Pursue more targeted inquiries to clarify which institutional barriers are obstructing the adoption of new technologies and approaches or the sharing of expertise and equipment across organizational and regional boundaries. These inquiries should inform USGS leadership, mission areas, and regions whether policies can be revised or whether a lack of understanding is creating perceived obstacles. Highlight cases when staff have successfully adopted new technologies and approaches to advance EarthMAP priorities and provide actionable information in a timely manner to spread awareness of how perceived obstacles can be navigated and overcome when appropriate. (3) Finding: Examples of people and projects integrating across disciplines and scales and applying advanced approaches to meet complex stakeholder needs exist. Such examples provide transfer value across the spectrum from approach to decision making. Many projects, already underway, appear to meet elements of the EarthMAP vision, and the USGS has people who can provide leadership in multiple types of specific integrated science efforts. Recommendation: Use these findings as a starting point for near-term strategic planning for integrated science. Highlight, incentivize, and build on existing interdisciplinary predictive science and information delivery activities across the USGS to advance toward further realization of an EarthMAP capacity. The CAT efforts to develop and assess existing USGS capacity to advance the EarthMAP vision revealed a fundamental challenge for not only this effort but any effort to assess existing capacity: A considerable amount of thought, time, and effort is required to survey and assess capabilities and tools available to support a given need, yet best results are still likely to provide an incomplete assessment. To better meet the frequent need to assess capabilities, tools, products, and projects that address an expressed strategic priority, the CAT proposes the concept of an on-demand capacity assessment framework supported by a software package that dynamically pulls and integrates information from existing USGS information systems and public domain registries. Although existing USGS enterprise information systems currently lack the structure, cross-system consistency, interoperability, and stability to support a continuously updated capacity assessment capability, we identify reasonable near-term steps to improve the utility of information gathered on expertise and project capacity and to improve the consistency and completeness of information and the ability of USGS systems to share that information. The ability to search and characterize this information will make future assessments of capacity faster, more complete, more efficient, and more targeted. This approach would grow the Bureau’s capacity knowledge over time, iteratively improving the ability to access, leverage, and synthesize existing capabilities and assets as well as identify and fill critical gaps. The greatest promise for developing integrated science could lie in linking across existing projects and expertise to create a multi-project capacity for addressing large, complex environmental issues.
Open-File Report↗
Models, data available, and data requirements for estimating the effects of injecting saltwater into disposal wells in the greater Altamont-Bluebell oil and gas field, northern Uinta Basin, Utah
Permits for disposing of salty oil-production water have been issued for 19 wells in the Greater Altamont-Bluebell field. During 1986 more than 500 million gallons of production water were injected into the Duchesne River, Uinta, and Green River Formations through 18 of these wells. The physical and chemical effects of injecting this water into aquifers containing potable water are poorly understood. Interfingering and the structural configuration of these formations add complexity to the description of the geometry and hydrogeology of the ground-water system. A preliminary assessment of the problem indicates that numerical modeling may offer a method of determining the effects of injection. Modeling possibilities include variable-density, three-dimensional flow, sectionaltransport, and areal-transport models. Data needed to develop these models can be derived from a synthesis of geologic, hydrologic, and hydrochemical data already available in the files of State and Federal agencies, oil companies, and private companies. Results from each modeling phase would contribute information for implementing the following phase. The result will be a better understanding of how water moves naturally through the groundwater system, the extent of alterations of both vertical and horizontal flow near the disposal wells, and an overall concept of the effects of deep injection on near-surface aquifers.
Utah↗
Hydrologic data for the Usquepaug-Queen River basin, Rhode Island
The Usquepaug-Queen River ground-water reservoir in Rhode Island is part of the stratified-drift aquifer along the Usquepaug-Queen River and its tributaries. The thickest, most permeable parts of the aquifer form the Usquepaug-Queen River ground-water reservoir. The 36.1-square mile study area comprises parts of Washington and Kent counties, and includes parts of the towns of Exeter, North Kingstown, Richmond, South Kingstown, and West Greenwich. The report presents geologic and hydrologic information needed for the prediction and management of hydrologic effects of proposed ground-water development. The report describes aquifer lithology, provides historical data on water-level and aquifer-storage changes, provides information on ground-water quality, and presents natural flow characteristics and water quality of streams in the Usquepaug-Queen River area. The data includes 275 ground-water sites; lithologic logs of 66 ground-water sites; water levels for 43 ground- water sites; chemical analyses of 36 ground-water sites; stream discharge measurements from the continuous-record gaging station on the Usquepaug- Queen River; discharge measurements at 10 partial- record stations in the area; chemical analyses of 17 stream sites; and the data from 14 slug tests conducted at ground-water sites.
Open-File Report↗
Land use, population dynamics, and land-cover change in eastern Puerto Rico: Chapter B in Water quality and landscape processes of four watersheds in eastern Puerto Rico
We assessed current and historic land use and land cover in the Luquillo Mountains and surrounding area in eastern Puerto Rico, including four small subwatersheds that are study watersheds of the U.S. Geological Survey's Water, Energy, and Biogeochemical Budgets (WEBB) program. This region occupies an area of 1,616 square kilometers, about 18 percent of the total land in Puerto Rico. Closed forests occupy about 37 percent of the area, woodlands and shrublands 7 percent, nonforest vegetation 43 percent, urban development 10 percent, and water and natural barrens total less than 2 percent. The area has been classified into three main land-use categories by integrating recent census information (population density per barrio in the year 2000) with satellite image analyses (degree of developed area versus natural land cover). Urban land use (in this analysis, land with more than 20 percent developed cover within a 1-square-kilometer area and population density greater than 500 people per square kilometer) covered 16 percent of eastern Puerto Rico. Suburban land use (more than 80 percent natural land cover, more than 500 people per square kilometer, and primarily residential) covers 50 percent of the area. Rural land use (more than 80 percent natural land cover, less than 500 people per square kilometer, and primarily active or abandoned agricultural, wetland, steep slope, or protected conservation areas) covered 34 percent of the area. Our analysis of land-cover change indicates that in the 1990s, forest cover increased at the expense of woodlands and grasslands. Urban development increased by 16 percent during that time. The most pronounced change in the last seven decades has been the shift from a nonforested to a forested landscape and the intensification of the ring of urbanization that surrounds the long-protected Luquillo Experimental Forest.
Professional Paper↗
Sensitivity of alpine and subalpine lakes to acidification from atmospheric deposition in Grand Teton National Park and Yellowstone National Park, Wyoming
The sensitivity of 400 lakes in Grand Teton and Yellowstone National Parks to acidification from atmospheric deposition of nitrogen and sulfur was estimated based on statistical relations between acid-neutralizing capacity concentrations and basin characteristics to aid in the design of a long-term monitoring plan for Outstanding Natural Resource Waters. Acid-neutralizing capacity concentrations that were measured at 52 lakes in Grand Teton and 23 lakes in Yellowstone during synoptic surveys were used to calibrate the statistical models. Three acid-neutralizing capacity concentration bins (bins) were selected that are within the U.S. Environmental Protection Agency criteria of sensitive to acidification; less than 50 microequivalents per liter (?eq/L) (0-50), less than 100 ?eq/L (0-100), and less than 200 ?eq/L (0-200). The development of discrete bins enables resource managers to have the ability to change criteria based on the focus of their study. Basin-characteristic information was derived from Geographic Information System data sets. The explanatory variables that were considered included bedrock type, basin slope, basin aspect, basin elevation, lake area, basin area, inorganic nitrogen deposition, sulfate deposition, hydrogen ion deposition, basin precipitation, soil type, and vegetation type. A logistic regression model was developed and applied to lake basins greater than 1 hectare in Grand Teton (n = 106) and Yellowstone (n = 294). A higher percentage of lakes in Grand Teton than in Yellowstone were predicted to be sensitive to atmospheric deposition in all three bins. For Grand Teton, 7 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-50 bin, 36 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-100 bin, and 59 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-200 bin. The elevation of the lake outlet and the area of the basin with northeast aspects were determined to be statistically significant and were used as the explanatory variables in the multivariate logistic regression model for the 0-100 bin. For Yellowstone, results indicated that 13 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-100 bin, and 27 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-200 bin. Only the elevation of the lake outlet was determined to be statistically significant and was used as the explanatory variable for the 0-100 bin. The lakes that exceeded 60-percent probability of having an acid-neutralizing capacity concentration in the 0-100 bin, and therefore had the greatest sensitivity to acidification from atmospheric deposition, are located at elevations greater than 2,790 meters in Grand Teton, and greater than 2,590 meters in Yellowstone.
Scientific Investigations Report↗
Time-integrated passive sampling as a complement to conventional point-in-time sampling for investigating drinking-water quality, McKenzie River Basin, Oregon, 2007 and 2010-11
The Eugene Water & Electric Board (EWEB) supplies drinking water to approximately 200,000 people in Eugene, Oregon. The sole source of this water is the McKenzie River, which has consistently excellent water quality relative to established drinking-water standards. To ensure that this quality is maintained as land use in the source basin changes and water demands increase, EWEB has developed a proactive management strategy that includes a combination of conventional point-in-time discrete water sampling and time‑integrated passive sampling with a combination of chemical analyses and bioassays to explore water quality and identify where vulnerabilities may lie. In this report, we present the results from six passive‑sampling deployments at six sites in the basin, including the intake and outflow from the EWEB drinking‑water treatment plant (DWTP). This is the first known use of passive samplers to investigate both the source and finished water of a municipal DWTP. Results indicate that low concentrations of several polycyclic aromatic hydrocarbons and organohalogen compounds are consistently present in source waters, and that many of these compounds are also present in finished drinking water. The nature and patterns of compounds detected suggest that land-surface runoff and atmospheric deposition act as ongoing sources of polycyclic aromatic hydrocarbons, some currently used pesticides, and several legacy organochlorine pesticides. Comparison of results from point-in-time and time-integrated sampling indicate that these two methods are complementary and, when used together, provide a clearer understanding of contaminant sources than either method alone.
Oregon↗
Summary of reconnaissance for radioactive deposits in Alaska, 1945-1954, and an appraisal of Alaskan uranium possibilities
In the period 1945-1954 over 100 investigations for radioactive source materials were made in Alaska. The nature of these investigations ranged from field examinations of individual prospects or the laboratory analysis of significantly radioactive samples submitted by prospectors to reconnaissance studies of large districts. In this period no deposits of uranium or thorium that would warrant commercial exploitation were discovered. The investigations, however, disclosed that radioactive materials occur in widely scattered areas of Alaska and in widely diverse environments. Many igneous rocks throughout Alaska are weakly radioactive because of uranium- and thorium-bearing accessory minerals, such as allanite, apatite, monazite, sphene, xenotime, and zircon; more rarely the radioactivity of these rocks is due to thorianite or thorite and their uranoan varieties. The felsic rocks, for example, granites and syenites, are generally more radioactive than the mafic igneous rocks. Pegmatites, locally, have also proved to be radioactive, but they have little commercial significance. No primary uranium oxide minerals have been found yet in Alaskan vein deposits, except, perhaps, for a mineral tentatively identified as pitchblende in the Hyder district of southeastern Alaska. However, certain occurrences of secondary uranium minerals, chiefly those of the uranite group, on the Seward Peninsula, in the Russian Mountains, and in the vicinity of Kodiak suggest that pitchblende-type ores may occur at depth beneath zones of alteration. Thorite-bearing veins have been discovered on Prince of Wales Island in southeastern Alaska. Although no deposits or carnotite-type minerals have been found in Alaska, several samples containing such minerals have been submitted by Alaskan prospectors. Efforts to locate the deposits from which these minerals were obtained have been unsuccessful, but review of available geologic data suggests that several Alaskan areas are potentially favorable for carnotite-type deposits. The chief of these areas is the Alaska Peninsula-Cook Inlet area which encompasses most of the reported occurrences of the prospectors' carnotite-type samples. Alaska is also potentially favorable for the occurrence of large bodies of the very low-grade uraniferous sedimentary rocks, such as phosphorites and black shales. This type of deposit, however, has not received much study because of the emphasis on the search for bonanza-type high-grade ores. Uraniferous phosphorites similar to those of Idaho, Montana, and Wyoming occur in northern Alaska on the north flank of the Brooks Range; black shales comparable to the uraniferous shales of the Chattanooga formation of southeastern United States have been noted along the Yukon River near the international boundary. Placer deposits in Alaska have some small potential for the production of the radioactive elements as byproducts of gold- and tin-placer mining. the placer area believed to have the relatively greatest potential in Alaska lies in the Kahiltna River valley where concentrates are known to contain such commercial minerals as ilmenite, cassiterite, platinum, and gold in addition to uranothorianite and monazite. The possibilities of the natural fluids--water and petroleum--have not yet been tested in Alaska to any great extent. Studies of fluids are in progress to determine whether they may be used to discover and define areas potentially favorable for the occurrence of uraniferous lodes.
Alaska↗
Computation of backwater and discharge at width constrictions of heavily vegetated flood plains
The U.S. Geological Survey, cooperated with the Federal Highway Administration and the State Highway Departments of Mississippi, Alabama, and Louisiana, to develop a proposed method for computing backwater and discharge at width constrictions of heavily vegetated flood plains. Data were collected at 20 single opening sites for 31 floods. Flood-plain width varied from 4 to 14 times the bridge opening width. The recurrence intervals of peak discharge ranged from a 2-year flood to greater than a 100-year flood, with a median interval of 6 years. Measured backwater ranged from 0.39 to 3.16 feet. Backwater computed by the present standard Geological Survey method averaged 29 percent less than the measured, and that computed by the currently used Federal Highway Administration method averaged 47 percent less than the measured. Discharge computed by the Survey method averaged 21 percent more then the measured. Analysis of data showed that the flood-plain widths and the Manning 's roughness coefficient are larger than those used to develop the standard methods. A method to more accurately compute backwater and discharge was developed. The difference between the contracted and natural water-surface profiles computed using standard step-backwater procedures is defined as backwater. The energy loss terms in the step-backwater procedure are computed as the product of the geometric mean of the energy slopes and the flow distance in the reach was derived from potential flow theory. The mean error was 1 percent when using the proposed method for computing backwater and 3 percent for computing discharge. (Woodard-USGS)
Mississippi↗
Bathymetry of Stevens Creek and Neal Shoals reservoirs, South Carolina, 1990
Stevens Creek Reservoir and Neal Shoals Reservoir are located in the Piedmont Province of South Carolina (fig. 1). The primary purposes for the reservoirs are hydroelectric power generation and recreational activities. Because there has been no bottom surveys of these reservoirs since they were formed in the early 1900's, there is concern about the decrease in reservoir volumes due to sedimen- tation. An investigation was begun in 1990 by the U.S. Geological Survey (USGS) in cooperation with the South Carolina Department of Natural Resources, Water Resources Division to provide information on present water depths, on areas of rapid-sediment deposition, and on changes in lake volume. This report documents the bathymetric surveys made of Stevens Creek and Neal Shoals Reservoirs during 1990 and provides maps that depict the depth of each reservoir. This report documents the bathymetric surveys made of Stevens Creek and Neal Shoals Reservoirs during 1990 and provides maps that depict the depth of each reservoir.
South Carolina↗