USGS ScienceSearch

SEARCH · USGS Science

Results for “Natural Resources Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

837 records · Page 40Linked to original sources

Estimating agricultural irrigation water consumption for the High Plains aquifer region with integrated energy- and water-balance evapotranspiration modeling approaches

Estimation of irrigation water use provides essential information for the management and conservation of agricultural water resources. Conventionally, water use data are created based on reports and surveys from water users, whereas manual records may not be complete due to lacking flow meters, measurement gaps, inconsistent methods across regions, and time- and cost-consuming data processing. Alternatively, spatially explicit estimation of irrigation water use can be conducted efficiently using remote sensing evapotranspiration (ET) modeling approaches. In this study, we created a gridded blue water evapotranspiration (BWET) dataset to estimate historical irrigation water consumption (1986 – 2020) in the croplands across the United States High Plains aquifer region. The BWET data were generated by integrating an energy-balance ET model [Operational Simplified Surface Energy Balance model (SSEBop)] and a water-balance ET model [Vegetation ET model (VegET)]. BWET in croplands indicates crop consumptive use of irrigation water extracted from surface water and groundwater resources. The BWET estimates were compared with reported irrigation water use data for all counties within the aquifer region. The results revealed high agreement between growing season (May – September) BWET and annual water withdrawal at county level. Specifically, correlation coefficients of volumetric BWET and water withdrawal were 0.90 and 0.96, respectively, for the entire aquifer region and western Kansas. The timeseries of BWET and water withdrawal showed similar temporal trends and high covariations. The BWET estimates were systematically lower than the water withdrawal measurements, which was primarily attributed to blue water losses in the irrigation system. The irrigation efficiency, calculated as the ratio of BWET to water withdrawal depth, was 0.57 and 0.74 for the entire aquifer region and western Kansas, respectively. This study demonstrates the capability of using satellite-based ET models (e.g., SSEBop and VegET) to efficiently estimate crop water consumption and evaluate irrigation efficiency at landscape, county, and regional scales.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma,

Hydrogeology, water budget, and simulated groundwater availability in the Salt Fork Arkansas River and Chikaskia River alluvial aquifers, northern Oklahoma, 1980–2020

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s aquifers to determine the maximum annual yield for each groundwater basin. The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, conducted an updated hydrologic investigation of the Salt Fork Arkansas River and Chikaskia River alluvial aquifers in northern Oklahoma for the study period spanning 1980–2020 and evaluated the simulated effects of potential groundwater withdrawals on groundwater flow and availability in the Salt Fork Arkansas River alluvial aquifer. A hydrogeologic framework and conceptual model were developed to guide the development of a numerical model. Three groundwater-availability scenarios were evaluated by using the calibrated numerical model, which was focused on the Salt Fork Arkansas River alluvial aquifer. These scenarios were used to (1) estimate equal-proportionate-share groundwater withdrawal rates, (2) quantify the potential effects of projected well withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. The 20-, 40-, and 50-year equal-proportionate-share groundwater withdrawal rates for the Salt Fork Arkansas River alluvial aquifer under normal recharge conditions were about 0.63, 0.58, and 0.57 acre-foot per acre per year, respectively. Projected 50-year groundwater withdrawal scenarios were used to simulate the effects of modified well withdrawal rates. Because well withdrawals were less than 2 percent of the calibrated numerical-model water budget, changes to the well groundwater withdrawal rates had little effect on simulated Salt Fork Arkansas River base flows and groundwater storage in the Salt Fork Arkansas River alluvial aquifer. A hypothetical 10-year drought scenario was used to simulate the potential effects of a prolonged period of reduced recharge on groundwater storage. Groundwater storage at the end of the hypothetical drought period was 14.5 percent less than the groundwater storage of the calibrated numerical model without the simulated drought.

Oklahoma

Lunar analog study using portable gamma-ray neutron detector: Radiochemical mapping of silicic-to-basaltic volcanic terrains in the San Francisco Volcanic Field, Arizona

Studying lunar silicic volcanism provides key insights into the Moon’s crustal evolution, magmatic processes, and volcanic history. The Lunar-VISE (Lunar Vulkan Imaging and Spectroscopy Explorer) mission will investigate the Gruithuisen domes, a unique lunar region hypothesized to have formed through silicic volcanism. Using instruments on a Firefly Aerospace lander and a Honeybee Robotics rover, Lunar-VISE will analyze mineralogy, geochemistry, and surface properties to determine the origin and evolution of the domes, with a gamma-ray and neutron spectrometer (LV-GRNS) among its payload instruments. In preparation for this mission, we conducted preliminary fieldwork using a handheld gamma-ray neutron detector with NaI(Tl) and Cs LiYCl :Ce (CLYC) scintillators. This study focuses on various rhyolitic and basaltic volcanic centers in the San Francisco Volcanic Field (SFVF) near Flagstaff, Arizona—specifically Sugarloaf Peak, Bonito Lava Flow, and Robinson Mountain, a region containing several well-characterized lunar analog sites. The SFVF was selected for this study due to its broad compositional diversity spanning basaltic to rhyolitic compositions, its well-preserved volcanic morphologies, and its extensive use in previous NASA field campaigns and astronaut training exercises, making it an ideal terrestrial laboratory for testing planetary exploration techniques. We measured natural radioactivity, specifically from potassium (K), thorium (Th), and uranium (U) and other elements in their decay chains, which serve as diagnostic tracers of magmatic differentiation and crustal evolution processes, to assess geochemical variability across compositionally diverse terrains. The detector’s sensitivity was assessed across varying concentration levels. Regionally averaged concentrations of radioisotopes were determined by gamma-ray spectroscopy at selected sites. Our measurements reveal significant compositional variations between sites, with Sugarloaf Peak (rhyolitic, silicic dome) exhibiting the highest average radioisotope concentrations (K: 3.29 ± 0.24 wt%, U: 14.35 ± 1.81 ppm, Th: 27.14 ± 2.43 ppm), while Bonito Lava Flow (K: 1.13 ± 0.08 wt%, U: 3.86 ± 0.52 ppm, Th: 7.52 ± 1.02 ppm), and Robinson Mountain (K: 1.46 ± 0.16 wt%, U: 5.59 ± 1.06 ppm, Th: 11.75 ± 1.98 ppm) show lower concentrations aligned with basaltic compositions. Gamma-ray fluxes were elevated by a factor of approximately three to four at Sugarloaf Peak relative to nearby basaltic terrains, consistent with expected geochemical differentiation patterns. Furthermore, at meter scales, proximity to geological features significantly affects measurements. Th concentrations adjacent to a cliff face at Sugarloaf’s base were 28% higher than values measured 3-5 meters away from the same feature, demonstrating localized compositional heterogeneity. Analysis of station-by-station measurements reveals that K, U, and Th concentrations show an elevation trend at Robinson Mountain and generally higher concentrations near Sugarloaf Peak’s summit, suggesting progressive magmatic differentiation and/or the presence of more evolved lithologies at higher elevations. By mapping these elements on Earth using GRNS, we aim to optimize measurement techniques for Lunar-VISE and similar rover-borne missions by demonstrating the applicability of portable GRNS instruments for planetary surface exploration in an analog environment.

Arizona

Shallow hydrogeologic framework of the Tully Valley mudboil area, Onondaga County, New York

Mudboils have been documented in the Tully Valley in southern Onondaga County, New York, since the late 1890s. Sediment-laden water from the mudboils flows into Onondaga Creek, which empties into Onondaga Lake at Syracuse 15 miles to the north. Turbidity from the mudboils has degraded the water quality of Onondaga Creek despite a series of mitigation efforts that began in the early 1990s. Turbidity mitigation actions presently (2025) being considered include creek relocation and offline sediment settling. In support of these proposed actions during 2021–23, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, U.S. Environmental Protection Agency, Onondaga Nation, Onondaga Environmental Institute, and Central New York Regional Planning and Development Board, collected and analyzed geologic, hydrologic, geophysical, and geotechnical data to characterize the shallow hydrogeology along four proposed creek-relocation paths and in the proposed offline settling basin area. The investigation indicated that the four proposed creek-relocation paths, two east of Onondaga Creek and two west of Onondaga Creek, are underlain by sediments including muck, alluvium, mudboil deposits, alluvial-fan sand and gravel, and lacustrine fines. The proposed excavations would penetrate partially to fully saturated conditions: generally, the water table is shallow near the creek and deep on the alluvial fans. The shallowest excavation, about 5 feet below land surface, would be near the creek and primarily in alluvium, and the deepest excavation, as much as 30 feet below land surface, would be in the alluvial-fan deposits. Brackish waters would be penetrated by proposed channel excavations on the eastern side of Onondaga Creek in an area downgradient from a potentially leaking historical salt-exploration borehole and near the main mudboil area. Excavation in these areas likely would provide a continuous source of brackish groundwater to the relocated creek. Proposed channel excavations of muck, soft to very soft lacustrine fines, and mudboil-type sediments in mudboil and suspected mudboil areas would pose an excavation and slope stability challenge and would have the greatest potential to create new mudboils. Proposed channel excavations below the water table on the Rattlesnake Gulf and Rainbow Creek alluvial fans would intercept groundwater and make the constructed streambank susceptible to seepage-induced slope instability. The substantial water-level fluctuation in the sediments of both alluvial fans would aggravate the stability condition. In addition, excavation on the Rattlesnake Gulf alluvial fan would have the potential to affect water-supply springs at the toe of the fan. The proposed offline settling basin area is in the northern part of the Rattlesnake Gulf alluvial fan. Natural and man-made diversions of Rattlesnake Gulf have resulted in saturated conditions in the general area of the proposed basin. The proposed offline settling basin would be excavated in, and berms would be constructed on, alluvial-fan deposits and lacustrine fines. In the proposed basin area, the alluvial deposits overlying the lacustrine fines are less than 10 feet thick. Excavation, berm construction, and loading of the saturated, soft to very soft lacustrine fines may be problematic and require soil strengthening.

New York

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper

Distributed volcanic fields—Patterns, products, processes, and plumbing

Distributed volcanic fields—also referred to as “monogenetic fields” or simply “volcanic fields”—are found on every continent, on the seafloors, and in every tectonic setting on Earth. Yet, our understanding of what constitutes a distributed volcanic field, and our knowledge of the common products, spatiotemporal patterns in activity, and plumbing systems of these fields, are commonly poor and (or) debated. Here we provide an overview of the current understanding of distributed volcanic fields (DVFs) through review and compilation of published data, with an emphasis on understanding the characteristics of fields that are essential to prepare for future hazardous volcanic activity. Distributed fields can erupt restricted to variable magma compositions. Activity in these fields produces nearly all types of volcanoes, including scoria and spatter cones, maars, low shields, lava fields, stratovolcanoes, and calderas, but monogenetic volcanoes are the defining characteristic of DVFs. The number of vents and lifespans of DVFs vary greatly; vent numbers range from 2 to greater than 1,000, and fields can remain active for 150,000 to 10 million years. Some characteristics of DVFs appear field dependent. Although the volumes of single monogenetic eruptions within DVFs globally are variable (from less than 0.1 to a few cubic kilometers), each field may have a characteristic range in eruption volumes. Eruptions within distributed volcanic fields can have a random distribution and timing, but spatial and (or) temporal vent clustering and alignment are common, and eruptions may be time or volume predictable. Average eruption recurrence intervals in DVFs span over an order of magnitude, from less than 3 to greater than 100 thousand years. Exposures of the shallow portions of older systems reveal that many magma batches end their ascent before reaching the surface, with some dikes stopping within only meters of the surface. Petrologic insights into the deeper plumbing systems of DVF volcanoes indicate variable depths of magma crystallization and (or) stalling, and that magma transport and storage systems may be unique to a particular DVF and its underlying crustal structure. Both seismic and petrologic data for mafic DVF eruptions corroborate intrusions of magma into storage systems in the months to years before eruption, as well as variable ascent rates through the crust (days to weeks). Few distributed fields are closely monitored, as they erupt infrequently, but these observations imply that the amount of time available to install monitoring instrumentation after the first felt seismicity may be short, as precursory activity is frequently on the order of days to months for modern DVF eruptions. Satellite-based geodesy may provide useful warning in such cases. This chapter concludes with outstanding questions and areas for future research that will aid in our understanding and preparedness for future DVF eruptions.

Professional Paper

Methods for estimating selected low-flow statistics at gaged and ungaged stream sites in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Conservation and Recreation, Office of Water Resources, computed selected at-site streamflow statistics at U.S. Geological Survey streamgages in and near Massachusetts and developed regional regression equations for estimating selected streamflows at ungaged stream sites in Massachusetts. Two sets of regional regression equations were developed: (1) the “mainland” equations, for mainland Massachusetts excluding the area covered by the second set, and (2) the “southeastern” equations, for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and for Cape Cod. The regression equations and at-site statistics may be used by Federal, State, and local water managers in addressing water-resources issues relevant in Massachusetts. Regional regression analyses for the mainland equations were developed to estimate the following 27 streamflow statistics: 99-, 98-, 95-, 90-, 85-, 80-, 75-, 70-, 60-, and 50-percent flow durations; monthly June, July, August, and September 90- and 50-percent flow durations; February, June, and August median of the monthly means; harmonic mean; and medians of the following annual low-flow frequency statistics: 7-day; 7-day, 2-year; 7-day, 10-year; 30-day, 2-year; and 30-day, 10-year. The analyses used 81 streamgages with minimal to no regulations in and near Massachusetts. The regression analyses determined that four basin characteristics—drainage area, combined hydrologic soils A and B, streamflow variability index, and annual mean temperature—were the only significant explanatory variables for the different mainland equations. Regional regression equations were developed for the Plymouth-Carver-Kingston-Duxbury aquifer area in southeastern Massachusetts and Cape Cod, because surface-water drainage areas and groundwater contributing areas do not always coincide in this area of the State. The regression analyses to estimate 10 flow durations from the 99th to 50th percentiles used 18 streamflow sites with some occasional minor regulations—because there are few unregulated streams in southeastern Massachusetts. The analyses determined that groundwater contributing area and storage (combined water bodies and wetlands) were the only significant explanatory variables in the southeastern equations.

Massachusetts

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska

Leveraging wildfire to augment forest management and amplify forest resilience

Successive catastrophic wildfire seasons in western North America have escalated the urgency around reducing fire risk to communities and ecosystems. In historically frequent-fire forests, fuel buildup as a result of fire exclusion is contributing to increased fire severity. The probability of high-severity fire can be reduced by active forest management that reduces fuels, prompting federal and state agencies to commit significant resources to increase the pace and scale of fuel reduction treatments. However, lower severity areas of wildfires also have the potential to act as “treatments,” and even catastrophic fires with large areas of high severity can still have substantial areas of lower severity fire that may be improving forest conditions locally. We quantified active management and wildfire severity across yellow pine and mixed conifer (YPMC) forests in the Sierra Nevada of California over a 22-year period (2001–2022). We did not detect increases in the area treated through time, but the area of beneficial wildfire (low to moderate severity) increased substantially, exceeding active treatment area in 8 of 22 years. Overall, beneficial wildfire treated ~17% more area than all treatments combined, and roughly four times more area than fire-related treatments alone. We then used disturbance history to evaluate resistance to high-severity wildfire and forest loss across the YPMC range. Of the 2.3 million ha YPMC of forests in 2001, 20% lost mature forests due to high-severity fire by 2022, which is nearly half of all YPMC area burned. Most of the landscape (47%) remains at risk of high-severity fire because it had no restorative disturbances, but 33% of the study area has some level of resistance to high-severity wildfire. In these areas, resistance will need to be enhanced and maintained over time via active management or managed wildfire, but these treatment needs will likely outpace capacity even under optimistic implementation scenarios. Given limited resources for implementing active management and the likelihood of a more fiery future, incorporating beneficial wildfire into landscape-level treatment planning has the potential to amplify the impact of active management treatments.

California, Nevada

Use of a numerical groundwater-flow model and projected climate scenarios to simulate the effects of future climate conditions on base flow for reach 1 of the Washita River alluvial aquifer and Foss Reservoir storage, western Oklahoma

To better understand the relation between climate variability and future groundwater resources in reach 1 of the Washita River alluvial aquifer and Foss Reservoir in western Oklahoma, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, used a previously published numerical groundwater-flow model and climate-model data to investigate changes in base flow and reservoir storage by evaluating three scenarios. The three projected climate scenarios were (1) a central-tendency scenario, (2) a warmer/drier scenario, and (3) a less-warm/wetter scenario. To estimate future base flow and groundwater availability in western Oklahoma, specifically in reach 1 of the Washita River alluvial aquifer, downscaled climate-model data from 231 Coupled Model Intercomparison Project phase 5 (CMIP5) projections coupled with a previously published numerical groundwater-flow model were used to compare the effects of different climate scenarios on the aquifer. Changes in base flow and groundwater-level elevations during a 30-year baseline scenario (1985–2014) and the three 30-year projected climate scenarios (2050–79) under central-tendency, warmer/drier, and less-warm/wetter climatic conditions were assessed by using the calibrated model. In the simulations, the amount of base flow and reservoir storage declined in the central-tendency and warmer/drier scenarios compared to the amount of base flow and reservoir storage under historical climatic conditions (baseline scenario). Mean annual change in reservoir storage decreased from the baseline scenario the most in the warmer/drier scenario, followed by the central-tendency scenario, but increased in the less-warm/wetter scenario compared to the baseline scenario. At the end of the simulation period (2079), the largest magnitude differences in groundwater-level elevations in all three projected climate scenarios relative to the baseline scenario occurred upstream from Foss Reservoir. Results from incorporating downscaled climate projections into localized numerical groundwater-flow models can highlight potential future changes in and implications for groundwater resources and availability.

Oklahoma

Hydrogeologic framework and conceptual model of the Red River alluvial aquifer east of Lake Texoma, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. At present (2025), the Oklahoma Water Resources Board has not established a maximum annual yield for the Red River alluvial aquifer east of Lake Texoma. To support the evaluation and determination of a maximum annual yield, a hydrogeologic framework and conceptual groundwater-flow model were developed to assess groundwater availability in the Red River alluvial aquifer east of Lake Texoma. The scope of this hydrologic investigation is the alluvium and terrace containing the Red River alluvial aquifer in Oklahoma between Lake Texoma, the Texas State line, and the Arkansas State line, an extent referred to in this report as “the eastern part of the Red River alluvial aquifer.” Parts of the alluvium and terrace extent in Arkansas and Texas are included in some analyses to address hydrologic influences from outside the aquifer’s boundaries in Oklahoma. The eastern part of the Red River alluvial aquifer in southeastern Oklahoma consists of approximately 401,280 acres of Quaternary alluvium and terrace deposits associated with the Red River and its major tributaries. Mean annual recharge to the aquifer for the 1980–2022 study period was estimated to be 8.62 inches per year, or 17.98 percent of the mean annual precipitation over the same period (47.94 inches). This mean annual recharge rate is equivalent to an inflow of approximately 288,250 acre-feet per year for the eastern part of the Red River alluvial aquifer. Recharge estimated using the Soil-Water-Balance code accounts for 98.7 percent of the conceptual-model inflows to the eastern part of the Red River alluvial aquifer. Saturated-zone evapotranspiration accounts for 11.9 percent and net streambed seepage accounts for 87.4 percent of the outflows in the conceptual model.

Arkansas, Oklahoma, Texas

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Effective communication in the geosciences requires consistent uses of stratigraphic nomenclature, especially divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Over the years, the development of new dating methods and the refinement of previous methods have stimulated revisions to geologic time scales. Advances in stratigraphy and geochronology require that any time scale be periodically updated. Therefore, Divisions of Geologic Time, which shows the major chronostratigraphic (position) and geochronologic (time) units, is intended to be a dynamic resource that will be modified to include accepted changes of unit names and boundary age estimates. This fact sheet is a modification of USGS Fact Sheet 2007-3015 by the U.S. Geological Survey Geologic Names Committee.

Fact Sheet

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado

Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah

Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.

Open-File Report

Footprints of past mining in Alaska (USA) derived from high-resolution satellite imagery

Mapping the land area used for mining in the past is essential for guiding the remediation of affected landscapes and assessing the resource potential of related waste products. Despite significant recent progress delineating footprints of active and inactive mining globally, the known inventory of such mine lands remains incomplete. Here, I describe a new map dataset of footprints of land surface disturbance and waste at sites of past mining in Alaska (USA) based on visual interpretation of satellite imagery. This dataset maps 6–14 times the area of previous regional and global mine footprint maps in Alaska and is the first in the region to explicitly delineate mine waste landforms (e.g., tailings piles). The data are publicly available from the U.S. Geological Survey under a “no rights reserved” Creative Commons (CC0) license agreement.

Alaska

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico