SEARCH · USGS Science

Results for “Journal of the American Water Resources Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 40Linked to original sources

USGS2025

Invasion of perennial sagebrush steppe by shallow-rooted exotic cheatgrass reduces stable forms of soil carbon in a warmer but not cooler ecoregion

Soil organic carbon ('SOC') in drylands comprises nearly a third of the global SOC pool and has relatively rapid turnover and thus is a key driver of variability in the global carbon cycle. SOC is also a sensitive indicator of longer-term directional change and disturbance-responses of ecosystem C storage. Biome-scale disruption of the dryland carbon cycle by exotic annual grass invasions (mainly Bromus tectorum, 'Cheatgrass') threatens carbon storage and corresponding benefits to soil hydrology and nutrient retention. Past studies on cheatgrass impacts mainly focused on total C, and of the few that evaluated SOC, none compared the very different fractions of SOC, such as relatively unstable particulate organic carbon (POC) or relatively stable, mineral-associated organic carbon (MAOC). We measured SOC and its POC and MAOC constituents in the surface soils of sites that had sagebrush canopies but differed in whether their understories had been invaded by cheatgrass or not, in both warm and relatively colder ecoregions of the western USA. MAOC stocks were 36.1% less in the 0–10 cm depth and 46.1% less in the 10–20 cm depth in the cheatgrass-invaded stands compared to the uninvaded stands of the warmer Colorado Plateau, but not in the cooler and more carbon-rich Wyoming Basin ecoregion. In plots where cheatgrass increased SOC, it was via unstable POC. These findings indicate that cheatgrass effects on the distribution of soil carbon among POC and MAOC fractions may vary among ecoregions, and that cheatgrass can reduce forms of carbon that are otherwise considered stable and 'secure', i.e. sequestered.

Environmental Research Communications↗

USGS2026

Ductile and brittle Rio Grande Rift deformation in Oligocene granite records a two-stage rift history in southern Colorado

The timing and nature of early deformation in the Rio Grande Rift remains poorly constrained. We present evidence for the earliest structural signature of rift extension in the Sangre de Cristo Range, southern Colorado, based on new geologic mapping, structural analysis, rock magnetic data, and thermochronology. These analyses focus on the ~30.0 Ma granite of Chokecherry Canyon, which hosts discrete low-angle mylonitic shear zones and a distributed, gently SW-dipping protomylonitic fabric. Incremental stretching axes, stretching lineations, and Kmax magnetic lineations plunge gently WSW. Quartz microstructures and crystallographic orientations indicate dominantly coaxial strain in the protomylonite and general shear in the discrete shear zones. Quartz c-axis opening-angle thermometry suggests deformation at ~420–540°C. Thermal modeling of ⁴⁰Ar/³⁹Ar K-feldspar data indicates rapid post magmatic cooling below the brittle–plastic transition, supporting shear-zone formation immediately after emplacement. Slow cooling from ~20–13 Ma was followed by renewed rapid cooling at ~13 Ma, interpreted as the onset of extensional exhumation along the Sangre de Cristo Fault System. These results show that extension in the northern Rio Grande Rift was active by ~30 Ma, earlier than previously recognized. We propose a two-stage model for northern Rio Grande Rift evolution: Stage I (30–23 Ma) records ENE–WSW extension localized in low-angle mylonitic shear zones associated with mid-crustal intrusions; Stage II (≤18 Ma) reflects brittle high-angle normal faulting, focused exhumation, and rift narrowing. Stage I magmatism and deformation along the western range front likely established crustal weaknesses that guided later fault development.

Colorado↗

USGS2022

New Hampshire and Landsat

At its widest point, a mere 80 miles separate the eastern and western borders of New Hampshire. Its northern and southern borders are just 175 miles apart. Even so, few States can boast as much rugged natural beauty per mile as the Nation’s fifth smallest. Nestled within New Hampshire are 93 State parks teeming with moose, Ursus americanus (Pallas, 1780; black bears), coyotes, beavers, river otters, and foxes. The largest section of White Mountain National Forest cuts across north-central New Hampshire, drawing visitors to its lakes, streams, mountain peaks, and hardwood forests. New Hampshire also is home to Lake Winnipesaukee, the State’s largest lake, notable for its floating post offices, the annual “ice-out” contest that sees residents vying to guess the date its surface ice dissipates, and its supporting role in films such as “On Golden Pond” and “What About Bob?” However, the scenic forests of New Hampshire face challenges in the form of invasive species such as Lymantria dispar (Linnaeus, 1758; spongy moth), Adelges piceae (balsam woolly adelgid), and Agrilus planipennis (emerald ash borer). In recent years, New Hampshire’s lakes and streams have seen more cyanobacterial blooms as well. The U.S. Geological Survey Landsat Program offers a consistent, reliable, and historically unmatched source of Earth observations that can aid in the mapping, monitoring, and management of New Hampshire’s land and water resources. Here are a few ways Landsat data have been used in the Granite State.

New Hampshire↗

USGS2026

Diverging mineral chemistry of iron and nickel throughout Earth’s changing redox conditions reveals foundation for their evolution as protein cofactors

Iron (Fe) and nickel (Ni) were both foundational to early metabolism, yet their biological trajectories diverged as Earth’s surface redox state changed. Here, we integrate mineral chemistry network analysis, protein metal-site coordination-sphere analysis, and curated redox comparisons to test how geochemistry and metalloprotein architecture co-evolved. Mineral network analyses show broader electronegativity variation and network diversity for Fe-bearing minerals through time relative to Ni-bearing minerals. In structural analyses of protein metal centers in a combined Fe/Ni protein structure set, it is shown that Fe- and Ni-associated environments differ in amino-acid composition, hydropathy structure, and cysteine representation. The greater chemical diversity and electronegativity variation in Fe minerals mirror the higher redox and structural versatility of Fe-binding proteins. The presence of Fe in a broader range of mineral and protein environments demonstrates the chemical adaptability of the metal, from the anoxic Archean to oxidative Earth surface conditions following the Great Oxidation Event. Iron, with its broad redox potential range in Fe-oxidoreductases, has a central role in both anaerobic and aerobic metabolisms. Nickel, by contrast, is less widespread in biology. Today, Ni is predominantly employed in deeply branching anaerobic pathways and by proteins with narrower redox potential ranges. Our results show that evolutionary processes, constrained by metal chemistry, habitually utilize Fe as a redox generalist while retaining Ni in specialized roles. The divergent paths of Ni and Fe, from rocks to proteins, demonstrate the intimate relationship between planetary geochemistry and metabolic origins on Earth and suggest that Fe/Ni geochemistry may inform habitability assessments in extraterrestrial environments when interpreted within specific planetary environmental contexts.

Life↗

USGS2024

Intense alteration on early Mars revealed by high-aluminum rocks at Jezero Crater

The NASA Perseverance rover discovered light-toned float rocks scattered across the surface of Jezero crater that are particularly rich in alumina ( ~ 35 wt% Al 2 O 3 ) and depleted in other major elements (except silica). These unique float rocks have heterogeneous mineralogy ranging from kaolinite/halloysite-bearing in hydrated samples, to spinel-bearing in dehydrated samples also containing a dehydrated Al-rich phase. Here we describe SuperCam and Mastcam-Z observations of the float rocks, including the first in situ identification of kaolinite or halloysite on another planet, and dehydrated phases including spinel and apparent partially dehydroxylated kaolinite. The presence of spinel in these samples is likely detrital in origin, surviving kaolinitization, pointing to an ultramafic origin. However, the association of low hydration with increased Al 2 O 3 abundances suggests heating-induced dehydration which could have occurred during the lithification or impact excavation of these rocks. Given the orbital context of kaolinite-bearing megabreccia in the Jezero crater rim, we propose an origin for these rocks involving intense aqueous alteration of the parent material, followed by dehydration/lithification potentially through impact processes, and dispersion into Jezero crater through flood or impact-related processes.

Communications Earth & Environment↗

USGS2025

Global maps of critical mineral production in 2023

Introduction The global production of many mineral commodities, especially critical minerals, is concentrated in a few countries that have mineral resources and the infrastructure necessary to mine and process those resources. For this reason, the type and amount of mineral production differ by country. For example, many countries produce such metallic ores as gold and silver, whereas only a few countries produce magnesium, niobium, platinum-group metals, and rare earths. The concentration of mining and processing in certain countries necessitates the existence of a global supply chain. A mineral supply chain is the sequence of mining and processing of minerals and manufacturing of products. Mineral supply chains are global in scale, complex, and dynamic. Supply chain data can be used to understand how a country’s mineral resources and various economic, technical, and environmental factors affect the complexity of global supply chains. This fact sheet summarizes the world’s leading countries (those accounting for 5 percent or more of a commodity’s global production in 2023) for production of select mineral commodities (mainly critical minerals) in the mining and processing stages. These countries and the minerals they produce are synthesized on global maps to communicate the status of, and potential risk to, mineral commodity supply chains from geographic production concentration. Trade data from United Nations Statistics Division (2025) is used to support assessments of the observed production data.

Fact Sheet↗

USGS2026

Localization of spatiotemporally heterogeneous subsurface flows using autoencoder-based deep learning framework for time-lapse self-potential tomography

Self-potential (SP) monitoring has emerged as a valuable method for characterizing subsurface hydrogeological features and processes due to its sensitivity to fluid-induced electrokinetic effects. Despite advancements in SP inversion, challenges remain in imaging groundwater dynamics from SP activities due to complex hydrological settings and transient noise. In this study, a deep learning autoencoder (AE)-based framework is proposed for the spatiotemporal localization of subsurface fluid movement from time-lapse SP tomography. Temporal segments of time-lapse numerical inversions were first derived from long-term SP monitoring conducted from a floodplain site in Oak Ridge, Tennessee, known for active hyporheic exchange. Subsequently, AE models based on vision transformer (ViT), convolutional long short-term memory (ConvLSTM), convolutional neural network, and temporal convolutional network were individually trained and compared on the SP tomography segments for reconstruction performance. Finally, the reconstruction error over time serves as an anomaly score to identify moments of active SP variation, whereas spatial distributions of errors within these moments are analyzed to image and localize regions associated with anomalous subsurface fluid movement. The results demonstrate that ConvLSTM- and ViT-AE are most capable for the localization task with contrasting error distributions and consistent delineation of anomalies. Applying the method to both SP arrays parallel and perpendicular to the stream produced consistent anomaly zones near a fault or karst feature, validating the robustness and generalization of the approach. These results demonstrate the potential of the proposed framework as a scalable and interpretable tool for spatiotemporal analysis of subsurface flow dynamics in complex hydrogeological systems.

Tennessee↗

USGS2025

Landsliding follows signatures of wildfire history and vegetative regrowth in a steep coastal shrubland

Five years after the deadly and destructive 9 January 2018 Montecito debris flows (Santa Barbara County, California, USA), an atmospheric river storm on 9 January 2023 triggered widespread landsliding that affected many of the same drainages in the Santa Ynez Mountains. Using high-resolution aerial imagery, we identified >10,000 landslides over an ∼160 km 2 area. Most of the landslides were shallow (<1 m in depth) translational debris slides that initiated on steep (∼40°), south-facing hillslopes, with the highest incidence of landsliding in a sandstone-dominated bedrock unit. The landslides mobilized into debris flows and delivered substantial quantities of sediment downstream, which contributed to costly infrastructure impairments. We detected order-of-magnitude differences in landslide density across the study area that could not be attributed to variations in geomorphology (topographic aspect and slope), geology (bedrock type), or hydrology (seasonal antecedent rainfall, peak hourly storm rainfall intensity, total storm rainfall), which are usually considered relevant factors for shallow landsliding. Rather, we found that vegetation regrowth following wildfire was likely a relevant factor associated with the highly variable landslide densities. Hillslopes with less and different types of vegetation regrowth after fire appear to have been more susceptible to shallow landslides. We identify a possible vegetation control on postfire landsliding, which highlights an opportunity for hypothesis testing using more advanced techniques to track the evolution of vegetation cover and vegetation type in steep shrubland environments following wildfire.

California↗

USGS2026

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗

USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗

USGS2026

Timescales of cumulate mobilization and mixing for the 1868 A.D. eruption of Mauna Loa, Island of Hawai‘i

The deadly 1868 A.D. eruption of Mauna Loa’s lower Southwest Rift Zone (Island of Hawai‘i) included a M7.9 earthquake and associated tsunami and landslides, demonstrating the severe hazards posed by Earth’s largest active subaerial volcano. To better understand the relationship between intense seismic activity, dike emplacement, magma storage, transport histories, and mobilization of olivine cumulates at Mauna Loa, we examine compositional zoning of olivine in the 1868 lava flows. Samples range from basalt (< 10% olivine) to picrite (30–40% olivine). The olivine cargo is heterogeneous (Fo 78.2–89.2 ; forsterite = [Mg/(Mg + Fe) × 100]) but dominated by ~ Fo 89 cores that lie above the Fe-Mg equilibrium field of host glasses. Crystal rims < Fo 80 are due to post-eruptive modification in slow cooling lava flows. Minor element compositions fall within the range of other Mauna Loa olivine erupted in the past 200 years. Olivine crystals exhibit both normal and complex Fo zoning patterns that yield timescales of diffusive re-equilibration that range from 3 to 258 days, with 72% of crystals recording 71 days or less. These timescales correspond to magmatic priming of the summit reservoir system ~ 2 months prior to the eruption and the M7.9 earthquake likely facilitated the transport of the crystal-rich summit-derived magmas downrift shortly prior to eruption. If the recently proposed faster Fe-Mg diffusion coefficient is used, timescales instead range from < 1 day to 25 days, with most recording 1 week or less. In this scenario, most of the olivine zoning would have to have been generated after the M7.9 earthquake perturbed the system.

Hawaii↗

USGS2026

Rupture into slow-slip fault regime during the 2018 Mw 6.9 Island of Hawaiʻi earthquake is followed by modest postseismic slip

On 4 May 2018, a M w 6.9 earthquake occurred on the south flank of Kīlauea, in the midst of an historic event that included a voluminous eruption from Kīlauea’s lower East Rift zone and caldera collapse at its summit. The earthquake was a consequence of both short‐ and long‐term stress buildup due to magmatic activity associated with the eruption and steady flank motion, respectively, and it revealed features of Kīlauea’s décollement fault that can inform understanding of future earthquake activity. We used geodetic data to determine the distributions of slip during the coseismic and postseismic periods and compared these with areas of known fault slip during past earthquakes and slow‐slip events (SSEs). The 2018 earthquake ruptured into an area of the décollement fault that was active during quasi‐regular SSEs that occurred in the two decades prior to 2018 but that have not been observed since. The coseismic slip model indicates that the amount of motion on the décollement fault was several times greater than what typically occurred during SSEs, suggesting that it may take decades for the fault to rebuild stress to the point at which SSEs will occur again. Postseismic afterslip also occurred in an area of the fault known to experience slow slip; however, unlike at other creeping faults, postseismic afterslip was rapid, being largely over within 2–3 days. The rapid nature and small magnitude of the postseismic afterslip may be due to the lack of a viscoelastic relaxation component, which is possibly a result of the shallow dip of the décollement fault not transferring stress efficiently into the lower crust.

Hawaii↗

USGS2017

Field-trip guide to Mount Hood, Oregon, highlighting eruptive history and hazards

This guidebook describes stops of interest for a geological field trip around Mount Hood volcano. It was developed for the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon. The intent of this guidebook and accompanying contributions is to provide an overview of Mount Hood, including its chief geologic processes, magmatic system, eruptive history, local tectonics, and hazards, by visiting a variety of readily accessible localities. We also describe coeval, largely monogenetic, volcanoes in the region. Accompanying the field-trip guidebook are separately authored contributions that discuss in detail the Mount Hood magmatic system and its products and behavior (Kent and Koleszar, this volume); Mount Hood earthquakes and their relation to regional tectonics and the volcanic system (Thelen and Moran, this volume); and young surface faults cutting the broader Mount Hood area whose extent has come to light after acquisition of regional light detection and ranging coverage (Madin and others, this volume). The trip makes an approximately 175-mile (280-kilometer) clockwise loop around Mount Hood, starting and ending in Portland. The route heads east on Interstate 84 through the Columbia River Gorge National Scenic Area. The guidebook points out only a few conspicuous features of note in the gorge, but many other guides to the gorge are available. The route continues south on the Mount Hood National Scenic Byway on Oregon Route 35 following Hood River, and returns to Portland on U.S. Highway 26 following Sandy River. The route traverses rocks as old as the early Miocene Eagle Creek Formation and overlying Columbia River Basalt Group of middle Miocene age, but chiefly lava flows and clastic products of arc volcanism of late Miocene to Holocene age.

Oregon↗

USGS2025

Scientific opportunities in the National Landscape Conservation System

The National Landscape Conservation System consists of unique and beautiful places across America’s landscapes where identified resources and values are protected and science is highlighted. The mission of the National Landscape Conservation System (NLCS), which is managed by the Bureau of Land Management and is often referred to as the agency’s National Conservation Lands, is to conserve, protect, and restore nationally significant landscapes for their cultural, ecological, and scientific values. This clear inclusion of science in the NLCS mission sets the stage for individual units to serve as places of learning, teaching, discovery, and innovation. Science is an integral part of managing the National Conservation Lands, and science conducted within and across the more than 900 units that make up the NLCS can inform and influence conservation and public land management well beyond its boundaries. Here, we highlight seven core aspects of National Conservation Lands that present valuable science opportunities: (1) the scientific values for which individual units are designated; (2) the many other resources, objects, and values within units; (3) the value of units as “control” sites for understanding the effects of activities such as mineral extraction that commonly occur elsewhere on multiple-use public lands but are often prohibited within National Conservation Lands; (4) the value of units for studying the effects of activities such as recreation that regularly occur and may be intensified on National Conservation Lands; (5) the high visibility of units, which draws strong interest and engagement from scientists, partners, and the public; (6) the functioning of the units as a network managed for a common purpose, which provides an opportunity to explore cross-cutting science questions across widely varying contexts and geographies; and (7) the opportunities units provide to promote and apply Indigenous Knowledge to scientific research to manage natural and cultural resources. Because of all of these characteristics, National Conservation Lands can serve as hubs for basic and applied science that can inform management of all public lands and resources into the future. We highlight these science opportunities through examples from existing units and suggest two actions that could help further science activities and impact on National Conservation Lands.

Parks Stewardship Forum↗

USGS2025

Insights and strategic opportunities from the USGS 2024 Per- and Polyfluoroalkyl Substances (PFAS) Interagency Workshop

Introduction In 2021, the U.S. Geological Survey (USGS) published Circular 1490 titled, “Integrated Science for the Study of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in the Environment: A Strategic Science Vision for the U.S. Geological Survey” (Tokranov and others, 2021). Circular 1490 was created to be a resource for USGS scientists prioritizing and planning research related to per- and polyfluoroalkyl substances (PFAS) and to be a guide for developing partnerships with other scientists, State and Federal agencies, and stakeholders engaged in PFAS research and management and mitigation of the environmental and human-health effects of PFAS. This USGS PFAS Strategic Science Vision document was intended to be the foundation for a “living strategic vision,” periodically providing updates on the state of USGS PFAS research, emerging PFAS data gaps and needs, and progress on interagency and stakeholder PFAS partnerships and priorities. To meet this objective, the USGS planned to host an Interagency and Stakeholder PFAS Workshop every 2–3 years. During September 10–12, 2024, the USGS hosted the first Interagency and Stakeholder PFAS Workshop in Reston, Virginia. The Workshop brought together experts from other Federal agencies (U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, Food and Drug Administration, Department of Defense [Air Force, Army]), State agencies (Washington Fish and Wildlife, Virginia Department of Transportation), and academia (Harvard University, University of Maryland) to address key challenges relating to the measurement and modeling of PFAS and the implications for environmental health. Participants engaged in in-depth discussions centered around six pivotal topics related to PFAS: (1) sampling protocols, methods and interpretation; (2) environmental sources, source apportionment, and occurrence; (3) environmental fate and transport; (4) human and wildlife exposure routes and risk; (5) bioconcentration, bioaccumulation, and biomagnification; and (6) ecotoxicology and effects. Each topic had three breakout sessions. A recurrent theme of workshop discussions was how data on a nationwide scale for PFAS occurrence in various environmental matrices, including air, water, food crops, biota, soil, and streambed sediment could help to advance scientific understanding. Participants noted significant geospatial data gaps, particularly in the midwestern and southern United States and the Pacific Northwest. PFAS data collection tends to be more robust along the eastern seaboard and in California. Participants stressed how enhancing the integration of large and small datasets across various agencies could help to support national scale understanding of PFAS. To address these gaps, attendees suggested leveraging datasets from Federal entities like the USGS and the U.S. Department of Defense, State agencies, and municipal utility services to develop predictive contaminant detection and transport models. Improved coordination between water quality programs and USGS research could help to facilitate access to valuable data, leading to comprehensive databases that inform PFAS point (wastewater treatment plants and landfills) and nonpoint (runoff from land, atmospheric deposition, food packaging) sources, environmental transport mechanisms, environmental detection and concentrations, potential exposure routes, and health effects on different biota, including humans. A specific request was made to develop a map demarking the depth of modern (1953 or later) groundwater, which is susceptible to surface-derived anthropogenic (that is, human-made) contamination, based on tritium-age dating. Emphasis was placed on incorporation of hydrology, groundwater flow paths, groundwater–surface water interactions, and landscape factors in predictive statistical models as a step to improve contaminant source identification and tracking. Molecular fingerprinting approaches garnered attention as techniques to link specific PFAS mixtures detected in a sample to environmental sources and levels in biota (Dávila-Santiago and others, 2022). Integrating data from abiotic (that is, water, soil, and air) and biotic (that is, living organisms) systems identified as a research opportunity. For example, understanding the composition of soils and sediments, which include a mixture of mineral, plant, and animal components, could advance understanding of exposure pathways. The discussions highlighted opportunities to explore and understand the potential redistribution and biotic exposures of PFAS from biosolid and wastewater treatment plant effluent land application practices, in addition to atmospheric releases and discharges from landfill and wastewater treatment plants. Participants identified research gaps surrounding how these sources may contribute to contamination and may affect surrounding ecosystems, including a better definition of anthropogenic background concentrations. Moving forward, the collection of co-occurrence data was noted as a means to improve understanding of complex mixtures and to leverage companion modeling efforts focused on areas with high and low contamination levels to identify areas of concern and unaffected resources. Participants emphasized how centralized USGS databases and the establishment of sample-metadata archives can help to ensure that samples are preserved and accessible for future research. In conclusion, the workshop participants identified opportunities to bridge data gaps and improve measurement techniques, modeling frameworks, databases, and communication, to enhance the understanding of PFAS and their effects on environmental and human health. Upon completion of the workshop, participants indicated an interest in developing strategic data collection, modeling, and analytical approaches to address these challenges.

Open-File Report↗

USGS2026

Groundwater-level elevations in the bedrock aquifers of the Denver Basin aquifer system, Elbert County, Colorado, 2015–23

Water users in Elbert County, Colorado, rely on groundwater from bedrock aquifers in the Denver Basin aquifer system (upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) for approximately half of their water uses. Withdrawals from the bedrocks aquifers have increased to meet the water use needs of expanding regional population growth and development. The U.S. Geological Survey, in cooperation with the Elbert County Board of County Commissioners, began a study in 2015 to monitor groundwater levels within Elbert County. The primary purpose of this report is to present a summary of groundwater levels measured during the study period (2015–23) and present results from statistical analyses of changes in groundwater-level elevations through time. Discrete groundwater levels were measured at 36 wells within Elbert County. Seven of those wells contained equipment to make and record continuous groundwater-level measurements at hourly intervals. All aquifers, except the lower Dawson aquifer, had only declining groundwater-level elevations in discrete measurements for wells with statistically significant trends. Of the eight statistically significant trends in the lower Dawson aquifer, two wells indicated increasing groundwater-level elevation from discrete measurements. The groundwater-level elevation trend medians in the upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers were −0.23, −0.66, −0.64, −0.39, and −0.63 feet per year, respectively, for discrete groundwater-level elevation measurements. Trends in continuous groundwater-level elevations were in agreement with statistically significant trends in discrete groundwater-level elevations for all wells. The groundwater-level elevation trend medians in this study, compared to the overall trends in a 2015−2018 study, both indicated declining groundwater-level elevations except in the upper Dawson aquifer, where the trend direction was opposite, a positive trend from 2015 to 2018 and a negative trend (declining groundwater elevations) from 2015 to 2023. The change in trends within the upper Dawson aquifer may be affected by differences in the study period and the trend analysis applied. Trends during the 2015–23 study period were compared to departures from the median 2015 groundwater-level elevation for each site in each aquifer. In general, the departures from the 2015 median supported trends observed at each site and correlated spatially with greater departures near the western border of Elbert County. Additionally, 30-year precipitation data showing wet and dry periods were overlaid with the departure from the 2015 median to assess groundwater-level patterns in wells in the five aquifers. Departures from the 2015 median groundwater-level elevations appeared greatest during the dry period between 2020 and 2023. Potentiometric-surface maps of the upper and lower Dawson aquifers created from static April 2023 groundwater elevations indicated groundwater-flow direction is generally from the south to the north. Results of this study could be used to guide additional groundwater monitoring in Elbert County and could aid in long-term planning of water resources.

Colorado↗

USGS2026

High-resolution magnetic survey using an unoccupied aerial vehicle to constrain buried lava flow geometry, volume, and eruptive history of Little Cones, Crater Flat, Nevada

Magnetic surveys are an important tool used to augment geologic mapping in distributed volcanic fields. Using magnetic anomalies, it is possible to model the geometry of shallowly buried volcanic features, such as conduits, sills, and lava flows. This subsurface mapping is important for understanding eruption dynamics and emplacement of lava flows, and it sometimes reveals buried volcanoes no longer visible at the surface. These data are critical to better interpret the numbers, styles, and magnitudes of eruptions in distributed volcanic fields and their associated volcanic hazards. New advances in unoccupied aerial vehicles (UAVs) offer an attractive middle range of resolution and aerial coverage between ground-based magnetic surveys and aeromagnetic surveys. Here, we present the results of a UAV fluxgate magnetic survey of the Little Cones, Nevada, scoria cones, which have been the target of previous ground and aeromagnetic surveys. The magnetic anomalies at Little Cones are of interest because the surrounding alluvium conceals lava flows that erupted from Little Cones, making it very difficult to understand the volume and morphology of lava flows from geologic mapping alone. Nonlinear inversion of UAV-collected magnetic data were used to model the thickness and morphology of buried Little Cones’ lava flows with higher precision than achieved previously. The sequence of events and calculated flow characteristics are then interpreted. The total volume of Little Cones, including concealed lava flows, is approximately 0.016 cubic kilometer, and the initial sheet flow erupted in less than 24 hours. The findings presented herein demonstrate that UAV-based magnetic surveys are a reliable method of data collection and an efficient alternative to other survey methods, facilitating development of a three-dimensional perspective of distributed volcanic fields.

Nevada↗

USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗