USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Maps”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

Modeling the geographic distribution of Ixodes scapularis and Ixodes pacificus (Acari: Ixodidae) in the contiguous United States

In addition to serving as vectors of several other human pathogens, the black-legged tick, Ixodes scapularis Say, and western black-legged tick, Ixodes pacificus Cooley and Kohls, are the primary vectors of the spirochete ( Borrelia burgdorferi ) that causes Lyme disease, the most common vector-borne disease in the United States. Over the past two decades, the geographic range of I. pacificus has changed modestly while, in contrast, the I. scapularis range has expanded substantially, which likely contributes to the concurrent expansion in the distribution of human Lyme disease cases in the Northeastern, North-Central and Mid-Atlantic states. Identifying counties that contain suitable habitat for these ticks that have not yet reported established vector populations can aid in targeting limited vector surveillance resources to areas where tick invasion and potential human risk are likely to occur. We used county-level vector distribution information and ensemble modeling to map the potential distribution of I. scapularis and I. pacificus in the contiguous United States as a function of climate, elevation, and forest cover. Results show that I. pacificus is currently present within much of the range classified by our model as suitable for establishment. In contrast, environmental conditions are suitable for I. scapularis to continue expanding its range into northwestern Minnesota, central and northern Michigan, within the Ohio River Valley, and inland from the southeastern and Gulf coasts. Overall, our ensemble models show suitable habitat for I. scapularis in 441 eastern counties and for I. pacificus in 11 western counties where surveillance records have not yet supported classification of the counties as established.

Journal of Medical Entomology↗

Climate change implications for tropical islands: Interpolating and interpreting statistically downscaled GCM projections for management and planning

The potential ecological and economic effects of climate change for tropical islands were studied using output from 12 statistically downscaled general circulation models (GCMs) taking Puerto Rico as a test case. Two model selection/model averaging strategies were used: the average of all available GCMs and the average of the models that are able to reproduce the observed large-scale dynamics that control precipitation over the Caribbean. Five island-wide and multidecadal averages of daily precipitation and temperature were estimated by way of a climatology-informed interpolation of the site-specific downscaled climate model output. Annual cooling degree-days (CDD) were calculated as a proxy index for air-conditioning energy demand, and two measures of annual no-rainfall days were used as drought indices. Holdridge life zone classification was used to map the possible ecological effects of climate change. Precipitation is predicted to decline in both model ensembles, but the decrease was more severe in the “regionally consistent” models. The precipitation declines cause gradual and linear increases in drought intensity and extremes. The warming from the 1960–90 period to the 2071–99 period was 4.6°–9°C depending on the global emission scenarios and location. This warming may cause increases in CDD, and consequently increasing energy demands. Life zones may shift from wetter to drier zones with the possibility of losing most, if not all, of the subtropical rain forests and extinction risks to rain forest specialists or obligates.

Puerto Rico↗

Crustal resistivity structure from magnetotelluric soundings in the Colorado Plateau-Basin and Range provinces, central and western Arizona

Resistivity structure to about 25 km depth is defined from two-dimensional modeling of 29 magnetotelluric (MT) soundings (0.002–5 Hz) that traverse 280 km of the southwestern Colorado Plateau, transition zone, and Basin and Range provinces in Arizona. From the surface to 5 km depth, the MT model suggests structural relationships between low-resistivity sedimentary and volcanic rocks (50–300 ohm m) and high-resistivity granitic and gneissic basement (500–9000 ohm m). In the Basin and Range province, the MT model and a seismic reflection section show a generally consistent distribution of supracrustal rocks that have relatively low to moderate resistivity (MT) and relatively strong, locally coherent reflectivity. The supracrustal zone defined by these physical properties is inferred to be composed of upper plate rocks above a middle Tertiary detachment fault system which has been mapped in surrounding ranges. Some low-angle fault zones inferred from seismic reflections to extend into high resistivity basement below the supracrustal rocks are not resolved by the MT model. A low-resistivity zone with a conductance of 500 S or more is modeled in the crust at an average depth of about 15 km in the Basin and Range province and transition zone and may deepen below the southwestern part of the Colorado Plateau. In the Basin and Range province, the top of the low resistivity may correspond to a reflective layer with a 6-s two-way-travel time. This deep low-resistivity zone might be caused by a small fraction of connected hydrous solutions or silicic melts.

Journal of Geophysical Research↗

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188 000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic Noachian crust, first observation of hydrated soil, discovery of manganese-rich coatings and fracture fills indicating strong oxidation potential in Mars' early atmosphere, characterization of soils by grain size, and wide scale mapping of sedimentary strata, conglomerates, and diagenetic materials.

Journal of Analytical Atomic Spectrometry↗

Influence of diameter on particle transport in a fractured shale saprolite

Experiments in an undisturbed, saturated column of weathered and fractured shale saprolite using fluorescent carboxylate-coated latex microspheres as tracers indicate that particle diameter plays a major role in controlling transport. In this study the optimum microsphere diameter for transport was approximately 0.5 ??m. Microspheres larger than the optimum size were present in the effluent at lower relative concentrations, apparently because of greater retention due to gravitational settling and/or physical straining. The smaller than optimum microspheres also experienced greater retention, apparently related to their higher rates of diffusion. Faster diffusion can lead to more frequent collisions with, and attachment to, fracture walls and may also lead to movement of particles into zones of relatively immobile pore water in the fractures or in the fine pore structure of the clay-rich matrix between fractures. Dismantling of the soil column and mapping of the distribution of retained microspheres indicated that there was substantial size-segregation of the microspheres between different fractures or in 'channels' within a fracture. Examination of small core samples showed that the smallest microspheres (0.05-0.1 ??m) were present in the fine pores of the matrix at distances of up to 3-4 mm from the nearest fracture, which supports the hypothesis that small particles can be retained by diffusion into the matrix. Calculations of settling velocity and diffusion rate using simple 1D approaches suggest that these processes could both cause significant retention of the larger and smaller particles, respectively, even for the fast advective transport rates (up to 32 m/day) observed during the experiments. Copyright (C) 1999 Elsevier Science B.V.

Journal of Contaminant Hydrology↗

DSWEmod - The production of high-frequency surface water map composites from daily MODIS images

Optical satellite imagery is commonly used for monitoring surface water dynamics, but clouds and cloud shadows present challenges in assembling complete water time series. To test whether the daily revisit rate of Moderate Resolution Imaging Spectroradiometer (MODIS) satellite imagery can reduce cloud obstruction and improve high-frequency surface water mapping, we compared map results derived from Landsat (30-m) and MODIS (250-m) data across the state of California for 2003–2019. We adapted the Dynamic Surface Water Extent (DSWE) model in Google Earth Engine to generate surface water map composites from MODIS imagery every 5, 10, 15, and 30 days, and compared products to monthly Landsat-based DSWE maps. Results for DSWEmod (DSWE MODIS) in California suggest that more than 5% data loss (cloud obstruction, etc.) was present in only 2% of the 15-day time series, as compared to 32% of the monthly Landsat DSWE time series. The five-day DSWEmod composites averaged 8.4% obscuration in the winter months. Area estimates derived from cloud-filtered MODIS and Landsat monthly products have the highest linear correlations compared to streamgage discharge records, suggesting that monthly scale analyses best explain the relationship between surface water area and general streamflow dynamics. Shorter-interval DSWEmod products have lower correlations but utility for understanding the timing of surface water peaks and past flood events.

Journal of the American Water Resources Associatio↗

Mapping saltwater intrusion in the Biscayne Aquifer, Miami-Dade County, Florida using transient electromagnetic sounding

Saltwater intrusion in southern Florida poses a potential threat to the public drinking-water supply that is typically monitored using water samples and electromagnetic induction logs collected from a network of wells. Transient electromagnetic (TEM) soundings are a complementary addition to the monitoring program because of their ease of use, low cost, and ability to fill in data gaps between wells. TEM soundings have been used to map saltwater intrusion in the Biscayne aquifer over a large part of south Florida including eastern Miami-Dade County and the Everglades. These two areas are very different with one being urban and the other undeveloped. Each poses different conditions that affect data collection and data quality. In the developed areas, finding sites large enough to make soundings is difficult. The presence of underground pipes further restricts useable locations. Electromagnetic noise, which reduces data quality, is also an issue. In the Everglades, access to field sites is difficult and working in water-covered terrain is challenging. Nonetheless, TEM soundings are an effective tool for mapping saltwater intrusion. Direct estimates of water quality can be obtained from the inverted TEM data using a formation factor determined for the Biscayne aquifer. This formation factor is remarkably constant over Miami-Dade County owing to the uniformity of the aquifer and the absence of clay. Thirty-six TEM soundings were collected in the Model Land area of southeast Miami-Dade County to aid in calibration of a helicopter electromagnetic (HEM) survey. The soundings and HEM survey revealed an area of saltwater intrusion aligned with canals and drainage ditches along U.S. Highway 1 and the Card Sound Road. These canals and ditches likely reduced freshwater levels through unregulated drainage and provided pathways for seawater to flow at least 12.4 km inland.

Florida↗

The distribution of uranium and thorium in granitic rocks of the basin and range province, Western United States

Some secondary uranium deposits are thought to have formed from uranium derived by the weathering of silicic igneous rocks such as granites, rhyolites, and tuffs. A regional geochemical survey was made to determine the distribution of uranium and thorium in granitic rocks of the Basin and Range province in order to evaluate the potential for secondary uranium occurrences in the area. The resulting geochemical maps of uranium, thorium, and the Th:U ratio may be useful in locating target areas for uranium exploration. The granites were sampled according to a five-level, nested, analysis-of-variance design, permitting estimates to be made of the variance due to differences between:(1) two-degree cells; (2) one-degree cells; (3) plutons; (4) samples; and (5) analyses. The cells are areas described in units of degrees of latitude and longitude. The results show that individual plutons tend to differ in uranium and thorium concentrations, but that each pluton tends to be relatively homogeneous. Only small amounts of variance occur at the two degree and the between-analyses levels. The three geochemical maps that were prepared are based on one-degree cell means. The reproducibility of the maps is U > Th ⪢ Th:U. These geochemical maps may be used in three methods of locating target areas for uranium exploration. The first method uses the concept that plutons containing the greatest amounts of uranium may supply the greatest amounts of uranium for the formation of secondary uranium occurrences. The second method is to examine areas with high thorium contents, because thorium and uranium are initially highly correlated but much uranium could be lost by weathering. The third method is to locate areas in which the plutons have particularly high Th:U ratios. Because uranium, but not thorium, is leached by chemical weathering, high Th:U ratios suggest a possible loss of uranium and possibly a greater potential for secondary uranium occurrences to be found in the area.

Arizona, California, Nevada, Utah↗

Paleomagnetic constraints on the geometry and timing of deformation at Yucca Mountain, Nevada

Paleomagnetic data from Miocene ash flow sheets indicate that southern Yucca Mountain has undergone about 30° of clockwise vertical-axis rotation since emplacement of the Tiva Canyon Member of the Paintbrush Tuff at about 13 Ma. Declinations of remanent magnetization from 32 sites in the reversely magnetized Tiva Canyon Member display a systematic southward increase over the 25 km north–south extent of Yucca Mountain. Probable errors in estimating structural attitudes are a major source of uncertainty in determining the amount of rotation between any two sites. Analysis of tilt-corrected directions of remanent magnetization from the Tiva Canyon sites indicates that structural attitudes determined from outcrop patterns on geologic maps are generally more accurate than field measurements of attitudes of compaction foliation or contacts. Attitudes determined from map patterns apparently minimize effects of (1) initial dips, (2) poorly defined compaction foliation, and (3) tilting that occurred after compaction but before blocking of remanence; however, such attitudes cannot accurately represent tilting related to unmapped local structures. Rotations implied by data from three older ash flow sheets, the Topopah Spring Member of the Paintbrush Tuff (seven sites), and the Prow Pass (four sites) and Bullfrog (three sites) Members of the Crater Flat Tuff are generally consistent with the amount and sense of rotation documented by data from the Tiva Canyon Member. Uncertainties in the declinations of tilt-corrected site mean directions from these older units preclude evaluating whether older units have undergone more rotation than the Tiva Canyon Member.

Journal of Geophysical Research↗

Lithotectonic assemblages as portrayed on the new bedrock geologic map of Massachusetts.

Scale of 1:250,000. The map units are grouped into eight lithotectonic packages. Five "zones" of older rocks that cover the whole state are, from west to east, the Taconic-Berkshire, Rowe-Hawley, Bronson Hill, Nashoba, and Milford-Dedham. In central and western Massachusetts, these zones are overlain by the Connecticut Valley and Merrimack "belts" of Silurian-Devonian, and local Carboniferous, strata; the two belts are distinguished from each other on the basis of the lithofacies of the Silurian strata. In eastern Massachusetts, the Milford-Dedham Zone also includes Silurian-Devonian, Carboniferous, Mesozoic, and Tertiary strata. A Mesozoic "basin" is separately identified in the Connecticut Valley region

Massachusetts↗

An evaluation of lake trout reproductive habitat on Clay Banks Reef, northwestern Lake Michigan

The extinction of the native populations of lake trout ( Salvelinus namaycush ) in Lake Michigan in about 1956 has been followed by a decades-long attempt to reestablish self-sustaining populations of this valuable species in habitats it formerly occupied throughout the lake. One of the most recent management strategies designed to facilitate recovery was to make a primary management objective the establishment of sanctuaries where stocked lake trout could be protected and self-sustaining populations reestablished. In the present study we employed habitat survey and mapping techniques, field and laboratory bioassays, egg traps, sediment traps, and gill nets to examine the potential for successful natural reproduction by stocked lake trout on Clay Banks Reef in the Door-Kewaunee sanctuary in Wisconsin waters of Lake Michigan. Our study revealed (1) there was suitable habitat on the reef to support the production of viable fry, (2) spawner abundance on the reef was the highest recorded in the great lakes, and (3) eggs taken from spawners on the reef and held on the reef in plexiglas incubators hatched and produced fry that survived through swim-up. We conclude that Clay Banks Reef has the potential to support successful natural reproduction by stocked lake trout.

Journal of Great Lakes Research↗

Potential spawning habitat for lake trout on Julian's Reef, Lake Michigan

Julian's Reef is an historical spawning ground for lake trout ( Salvelinus namaycush ) in southwestern Lake Michigan. It is a designated lake trout refuge and is the focus of lake trout restoration efforts in Illinois waters of the lake. We studied the reef to determine its potential as spawning habitat for stocked lake trout. We used side-scan sonar and a remotely operated vehicle equipped with a video camera to survey and map 156 ha of lake bed on the southeast portion of the reef, where an earlier study revealed the presence of loose-rock substrate potentially suitable for use by spawning lake trout. Our survey showed that the substrate on the reef that most closely resembled that described in the literature as suitable for spawning by stocked lake trout in the Great Lakes was rubble patches with interstitial depths greater than 20 cm. These rubble patches occupied about 2 ha of the 13-ha expanse of bedrock and rubble substrate near the reef crest in the surveyed area. We estimated that these rubble patches, if fully used by spawning lake trout, could accommodate egg deposition by at least 1,300–3,300 2.7-kg females.

Journal of Great Lakes Research↗

Earthquake source mechanisms and stress field variations associated with wastewater-induced seismicity in southern Kansas, USA

The strong increase of seismicity rates in the contiguous USA over the last 10 years is linked to the injection of huge amounts of wastewater from oil and gas production in unconventional hydrocarbon reservoirs. We calculated 549 moment tensors of induced earthquakes ( M W ≤ 4.9) in southern Kansas to study their source mechanisms and their relation to injection activity. Seventeen percent of the events analyzed contained significant volumetric (ISO%) components, and these events mostly occurred near the two largest local earthquakes during the 4 months of largest active wastewater disposal. Mapping the local stress field, we determined that most of the region lies within a transtensional stress regime, with a maximum horizontal stress σ Hmax trending N75°E. In the epicentral area of the M W 4.9 Milan earthquake, the σ Hmax trend is rotated to about S80°E. Locally, two areas display a change in the stress field orientation with depth, from transtensional above 5.5 km depth to strike slip deeper in the basement. Relating the resolved fault geometries to the obtained local stress field orientation, we find that most of the activated fault planes were optimally oriented to the current stress field and thus small stress perturbations caused by the water injection could lead to failure.

Kansas↗

Rapid heat-flowing surveying of geothermal areas, utilizing individual snowfalls as calorimeters

Local differences in rate of heat transfer in vapor and by conduction through the ground in hot spring areas are difficult and time-consuming to measure quantitatively. Individual heavy snowfalls provide a rapid low-cost means of measuring total heat flow from such ground. After a favorable snowfall (heavy, brief duration, little wind, air temperature near 0°C), contacts between snow-covered and snow-free ground are mapped on a suitable base. Each mapped contact, as time elapses after a specific snowfall, is a heat-flow contour representing a decreasing rate of flow. Calibration of each mapped contact or snow line is made possible by the fact that snow remains on insulated surfaces (such as the boardwalks of Yellowstone's thermal areas) long after it has melted on adjacent warm ground. Heat-flow contours mapped to date range from 450 to 5500 μcal/cm 2 sec, or 300 to 3700 times the world average of conductive heat flow. The very high rates of heat flow (2000 to > 10,000 μcal/cm 2 sec) are probably too high, and the lower heat flows determinable by the method (<500 μcal/cm 2 sec) may be too low. Values indicated by the method are, however, probably within a factor of 2 of the total conductive and convective heat flow. Thermal anomalies from infrared imagery are similar in shape to heat-flow contours of a test area near Old Faithful geyser. Snowfall calorimetry provides a rapid means for evaluating the imagery and computer-derived products of the infrared data in terms of heat flow.

Yellowstone National Park↗

A note on the correlation between geophysical observations and seismicity in the Arava/(Araba) Valley at the southern part of the Dead Sea fault

The spatial distribution of the earthquakes in the Arava Valley, a 150-km section of the Dead Sea Transform, is compared for the first time with the local subsurface geological features derived from geophysical and geological data. Gravity data suggested that the Gharandal, Timna, and Elat basins were filled by low-density young sediments. These features were confirmed by seismic reflection profiles and high-resolution aeromagnetic (HRAM) survey. The HRAM survey delineated the trace of the Dead Sea Transform (DST), which separates magnetic anomalies in the eastern and western parts of the valley, and revealed the occurrence of the unknown deep magmatics. Overall, the earthquake activity appears to be strongly related to the Dead Sea Transform. However, on a local scale, there is no apparent correlation between the seismicity and the mapped fault segments comprising the DST fault system. Absence of the correlation may be a result of insufficient accuracy of the earthquake localization and/or the inclined fault plane. However, in spite of such inaccuracy, it is clearly observed that the large clusters of the low-magnitude earthquakes coincide well with the sedimentary basins. Two pronounced clusters appear to coincide with the subsurface magmatics. We assume that the subsurface geology predetermines areas of stress accumulation and earthquakes. These areas can be the end of faults, or fault jogs, which sometimes create basins. Magmatism can also be affected by the stress field and predetermine the stress and earthquakes' allocation. ?? 2007 Science From Israel/LPPLtd.

Israel Journal of Earth Sciences↗

Conservation assessment of current and proposed nature reserves of Tamaulipas State, Mexico

The Mexican state of Tamaulipas located in the northeastern portion of the country currently has five state nature reserves covering slightly less than 3% of its land area. These reserves were established for a variety of reasons, many unrelated to the protection of biological resources. In 2000 in response to a growing concern about the lack of organized conservation reserve planning to protect the important biological and physical features of Mexico, the Mexican Commission for Knowledge and Use of Biodiversity (CONABIO) proposed 13 new terrestrial reserves for Tamaulipas. If established these new reserves would increase the proportion of terrestrial protected lands in the state to over 21%. We compiled a geographic information system (GIS) using existing digital thematic maps of physical and biological features to examine how the existing and proposed reserves might serve to protect the biodiversity and physical features of the state. We found that most of the existing protected sites occur in areas with elevations > 1000-2000 m with temperate climate and dominated by pine forest, oak forest, and cloud forest vegetation cover types. The state's dominant biotic region - low elevation coastal plain with tropical and arid climate types and xeric scrub vegetation - is disproportionately underrepresented in the current reserve system. The creation of the proposed areas would substantially increase the protection of mid and high elevation lands. The largest gap in the protected lands network would be low elevation, level, coastal lands.

Tamaulipas↗

Visible and near-infrared multispectral analysis of rocks at Meridiani Planum, Mars, by the Mars Exploration Rover Opportunity

Multispectral measurements in the visible and near infrared of rocks at Meridiani Planum by the Mars Exploration Rover Opportunity's Pancam are described. The Pancam multispectral data show that the outcrops of the Burns formation consist of two main spectral units which in stretched 673, 535, 432 nm color composites appear buff- and purple-colored. These units are referred to as the HFS and LFS spectral units based on higher and lower values of 482 to 535 nm slope. Spectral characteristics are consistent with the LFS outcrop consisting of less oxidized, and the HFS outcrop consisting of more oxidized, iron-bearing minerals. The LFS surfaces are not as common and appear, primarily, at the distal ends of outcrop layers and on steep, more massive surfaces, locations that are subject to greater eolian erosion. Consequently, the HFS surfaces are interpreted as a weathering rind. Further inherent spectral differences between layer's and between different outcrop map units, both untouched and patches abraded by the rover's Rock Abrasion Tool, are also described. Comparisons of the spectral parameters of the Meridiani outcrop with a set of laboratory reflectance measurements of Fe3+-bearing minerals show that the field of outcrop measurements plots near the fields of hematite, ferrihydrite, poorly crystalline goethite, and schwertmannite. Rind and fracture fill materials, observed intermittently at outcrop exposures, are intermediate in their spectral character between both the HFS and LFS spectral classes and other, less oxidized, surface materials (basaltic sands, spherules, and cobbles). Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

Oblique synoptic images, produced from digital data, display strong evidence of a "new" caldera in southwestern Guatemala

The synoptic view of broad regions of the Earth's surface as displayed in Landsat and other satellite images has greatly aided in the recognition of calderas, ignimbrite plateaus and other geologic landforms. Remote-sensing images that include visual representation of depth are an even more powerful tool for geologic interpretation of landscapes, but their use has been largely restricted to the exploration of planets other than Earth. By combining Landsat images with digitized topography, we have generated regional oblique views that display compelling evidence for a previously undocumented late-Cenozoic caldera within the active volcanic zone of southwestern Guatemala. This "new" caldera, herein called Xela, is a depression about 30 km wide and 400-600 m deep, which includes the Quezaltenango basin. The caldera depression is breached only by a single river canyon. The caldera outline is broadly circular, but a locally scalloped form suggests the occurrence of multiple caldera-collapse events, or local slumping of steep caldera walls, or both. Within its northern part, Xela caldera contains a toreva block, about 500 m high and 2 km long, that may be incompletely foundered pre-caldera bedrock. Xela contains several post-caldera volcanoes, some of which are active. A Bouguer gravity low, tens of milligals in amplitude, is approximately co-located with the proposed caldera. The oblique images also display an extensive plateau that dips about 2?? away from the north margin of Xela caldera. We interpret this landform to be underlain by pyroclastic outflow from Xela and nearby Atitla??n calderas. Field mapping by others has documented a voluminous rhyolitic pumiceous fallout deposit immediately east of Xela caldera. We speculate that Xela caldera was the source of this deposit. If so, the age of at least part of the caldera is between about 84 ka and 126 ka, the ages of deposits that stratigraphically bracket this fallout. Most of the floor of Xela caldera is covered with Los Chocoyos pyroclastics, 84-ka deposits erupted from Atitla??n caldera. Oblique images produced from digital data are unique tools that can greatly facilitate initial geologic interpretation of morphologically young volcanic (and other) terrains where field access is limited, especially because conventional visual representations commonly lack depth perspective and may cover only part of the region of interest. ?? 1993.

Journal of Volcanology and Geothermal Research↗