USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal for Disaster Risk Reduction”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,443 records · Page 40Linked to original sources
USGS2026

Effect of mineral deposit data on predictions from the three-part approach to quantitative mineral resource assessment—A study of 16 previous U.S. Geological Survey assessments

The three-part approach to quantitative mineral resource assessment requires information about the properties of undiscovered mineral deposits in an assessment area. These properties are unknown, so the properties of discovered mineral deposits of the same mineral deposit type are used instead. In the three-part approach, these discovered mineral deposits come from around the world, and their properties constitute the pooled data for that mineral deposit type. Alternatively, these discovered mineral deposits could come from the assessment area, and their properties constitute the tract data for that mineral deposit type. Tract data may be more representative of the undiscovered mineral deposits in the assessment area than the pooled data. The goal of this study was to determine whether resource predictions using pooled data are equivalent to resource predictions using tract data. To this end, 16 previous U.S Geological Survey assessments were studied. For each assessment, resources were predicted for one undiscovered mineral deposit in the assessment area. One set of predictions used pooled data, and another used tract data. The two sets of predictions were compared with an equivalence test, using the six assessment statistics that are commonly reported for mineral resource assessments. Practical equivalence is the condition that two corresponding assessment statistics are within a factor of 1.5 of one another. For each of 2 assessments, all 6 assessment statistics were practically equivalent. For both assessments, the assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 1.30 times smaller to 1.03 times larger. For each of 14 assessments, 1 or more of the 6 assessment statistics were not practically equivalent. The assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 26.6 times smaller to 5.53 times larger. The use of pooled data has been a standard procedure in the three-part approach since at least 1986. The 16 assessments in this study are not a representative sample of those prior assessments that used pooled data. So, it is inappropriate to use the study results to infer whether pooled data affected the resource predictions for those prior assessments.

Scientific Investigations Report↗
USGS2025

Properties of solid bitumen formed during hydrous, anhydrous, and brine pyrolysis of oil shale: Implications for solid bitumen reflectance in source-rock reservoirs

Solid bitumen reflectance (BR o in %) is widely used as a thermal maturity proxy in source-rock reservoirs, yet solid bitumen texture and physical attributes may be affected by varying environmental constraints during its formation, e.g., water saturation, mineral catalysis, or salinity. Herein we investigated the development of solid bitumen properties during artificial maturation using three diverse (lacustrine to marine) oil shale samples containing abundant amorphous H-rich sedimentary organic matter (bituminite). The oil shales were treated via pyrolysis (320 °C, 72 h) using hydrous, anhydrous, and brine conditions, causing the development of a newly formed solid bitumen in the experiment residues from the thermal conversion of bituminite. The properties of the newly formed solid bitumen then were evaluated via geochemical screening tests, optical and electron microscopy, and infrared spectroscopy. Experimental residues also were treated via solvent extraction, allowing characterization of the effects of extraction on solid bitumen. Results showed that bituminite with higher resin and asphaltene components evolved to a solid bitumen with higher reflectance (as a percentage of the original value) when exposed to the same heat treatment, relative to bituminite with higher saturate and aromatic components. Aromatization of solid bitumen also was generally more pronounced in the presence of deionized water relative to anhydrous conditions, supporting prior observations. These results suggest the compositions of primary sedimentary organic matter, and the local concentration of water, affect the development of solid bitumen during thermal advance, potentially explaining the origin of multiple solid bitumen populations with varying reflectance in source-rock reservoir samples or in a single microscope field. Experiments using brine were inconclusive regarding enhanced/decreased aromatization, which could be attributed to the salinities of the brines used in the tests. Extraction of residues caused a consistent increase in BR o values, suggesting that migrating or expelled oils could cause an increase in BR o via natural solvation and absent an increase in temperature. This work provides insights into the development and evolution of BR o in source-rock reservoirs as a function of the composition of the original bituminite and changing environmental conditions, with potentially broad application for petroleum prospecting and resource estimation.

Colorado↗
USGS2023

Prediction of the probability of elevated nitrate concentrations at groundwater depths used for drinking-water supply in the Puget Sound basin, Washington, 2004–19

The Puget Sound basin encompasses the 13,700-square-mile area that drains to the Puget Sound and the adjacent marine waters of Washington State. Well more than 4 million people live within the basin, with numbers continuing to increase, who rely on the basin’s natural resources including groundwater. The Puget Sound Partnership was created by a Washington State statute to implement a science-based recovery of the Puget Sound to help address impacts to these resources. As part of the recovery, the partnership developed the Puget Sound Vital Signs as measures of ecosystem health that guide the assessment of progress toward Puget Sound recovery goals. The Puget Sound Partnership Leadership Council adopted a Drinking Water Vital Sign associated with human health and quality of life, recognizing certain indicators as integral to the sustainability of Puget Sound recovery efforts. One such Vital Sign indicator was the vulnerability of groundwater throughout the aquifers of the Puget Sound basin to elevated nitrate concentrations as defined by the probability of exceeding 2 milligrams/liter (mg/L) at a specific location and well depth. The U.S. Geological Survey (USGS) led the effort to characterize groundwater vulnerability. For this study, groundwater vulnerability refers to a probability with which a contaminant applied at or near the land surface can migrate to the aquifer of interest for a given set of land-use practices. Nitrate concentration data were selected for evaluation because elevated nitrate concentrations are typically caused by anthropogenic activities and have been associated with deleterious impacts on human health. To identify groundwater vulnerability to elevated nitrate concentrations, logistic regression was used to relate anthropogenic (human associated) and natural variables to the occurrence of elevated nitrate concentrations in untreated groundwater from large public water supply system wells found within the Washington State Department of Health Sentry database. Variables that were analyzed included well depth, soil hydraulic conductivity, precipitation, population density, fertilizer application amounts, and land-use types. Statistically significant models that predicted the probabilities of groundwater nitrate concentrations greater than 2 mg/L based on the predictor variables were created for the time periods 2000–04, 2005–09, 2010–14, and 2015–19. For all time periods, well depth and a measure of the abundance of urban and agricultural land over or near the well consistently helped explain the vulnerability of the well to elevated nitrate concentrations defined as a probability of exceeding 2 mg/L of nitrate. Precipitation and (or) soil hydraulic conductivity were also important predictor variables in the models. The models for each time period were used to create maps of groundwater vulnerability at 150- and 300-foot depths throughout the Puget Sound basin. As expected, the most vulnerable locations were associated with shallower well depths and increased agriculture and urban land cover. Across all four time periods, groundwater vulnerability throughout the Puget Sound was low, with probabilities of exceeding 2 mg/L concentrations of nitrate at depths at 150 and 300 feet typically less than 50 percent. Results also found a slight decrease in probabilities of elevated nitrate concentrations throughout the basin over time. More specifically, additional statistical tests found that groundwater with probabilities of less than about 60 percent declined from 2000 to 2019 and represented more than 75 percent of the modeled Puget Sound basin aquifer. Wells with greater than 60 percent probability increased over the same time period but represented only about 25 percent of the aquifer. The maps and statistical analysis presented in the study provide valuable and informative evaluation of the vulnerability of groundwater in the Puget Sound basin to elevated nitrate concentrations. The probability maps do not represent measured nitrate concentrations in groundwater, but rather they present the probability that nitrate concentrations exceed 2 mg/L. The models and predictions from this study are a viable indicator for the Puget Sound Partnership’s Healthy Human Population—Drinking Water Vital Sign. The logistic regression modeling approach presented here benefits water managers by allowing them to assess temporal trends in a range of probabilities, explore vulnerability changes as new regional land cover and anthropogenic data are generated, and distinguish vulnerabilities at different depths within the aquifer.

Washington↗
USGS2024

Uncertainty in ground-motion-to-intensity conversions significantly affects earthquake early warning alert regions

We examine how the choice of ground‐motion‐to‐intensity conversion equations (GMICEs) in earthquake early warning (EEW) systems affects resulting alert regions. We find that existing GMICEs can underestimate observed shaking at short rupture distances or overestimate the extent of low‐intensity shaking. Updated GMICEs that remove these biases would improve the accuracy of alert regions for the ShakeAlert EEW system for the West Coast of the United States. ShakeAlert uses ground‐motion prediction equations (GMPEs), which calculate spatial distributions of peak ground acceleration (PGA) and peak ground velocity (PGV) from earthquake source estimates, combined with GMICEs to translate GMPE output into modified Mercalli intensity (MMI). We find significant epistemic uncertainty in alert distances; near‐source MMI estimates from different GMICEs can differ by over 1 MMI unit, and MMI extents used for public EEW alerts can differ by hundreds of kilometers for larger magnitude earthquakes ( M ∼6.5+). We use a catalog of “Did You Feel It?” shaking reports to evaluate how well GMICEs predict observed shaking. Our preferred GMICE is the one that computes MMI using PGV for high intensities and transitions to using PGA for nondamaging intensities. These results motivate updating GMICE relationships more generally, including in ShakeMap applications.

The Seismic Record↗
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗
USGS2025

Status of water-quality conditions in the United States, 2010–20

Degradation of water quality can make water harmful or unusable for humans and ecosystems. Although many studies have assessed the effect of individual constituents or narrow suites of constituents on freshwater systems, no consistent, comprehensive assessment exists over the wide range of water-quality effects on water availability. Using published studies, data, and models completed at regional or national scales in the United States during 2010–20, this chapter moves towards a comprehensive assessment by summarizing how selected anthropogenic and geogenic water-quality constituents affect national-scale water availability for human and ecosystem needs. Several types of human health, agricultural, ecological, and beneficial-use standards or thresholds were used to provide context for categorizing surface-water and groundwater quality. Water availability for human and ecological use is limited by elevated concentrations of geogenic and anthropogenic constituents in surface and groundwater. Elevated concentrations of five geogenic constituents (arsenic, manganese, strontium, radium, and adjusted gross alpha) are common in groundwater and collectively affect the drinking water supply to over 30 million people. Surface water sourced drinking water supplies are impaired in about a third of assessed stream miles, most commonly because of non-mercury metals and salinity. Health-based violations at community water systems may disproportionately affect socially vulnerable communities. Ecological water uses are predominantly limited by nutrients, sediment, temperature, pathogens, salinity, and pesticides. Water availability for human and ecological use is adversely affected by human activities including human contaminant sources (for example, wastewater, agriculture), processes (for example, dredging, groundwater pumping), or permanent landscape modifications (for example, dams, urbanization). Primary contaminant sources vary spatially and include fertilizer and manure, atmospheric deposition, wastewater treatment plants, urban land, and a range of natural sources. Contaminants of emerging concern, contaminants without regulatory thresholds, and mixtures of geogenic and anthropogenic water contaminants also contribute to ecological degradation and human exposure.

conterminous United States↗
USGS2025

Assessment of water chemistry of the Coconino aquifer in northeastern Arizona

The Coconino aquifer was investigated as a potential groundwater resource for the Hopi Tribe and Navajo Nation in northeastern Arizona. Basic groundwater chemistry, including major ions, total dissolved solids, and selected trace metal concentrations, are presented and analyzed to characterize the Coconino aquifer. The geochemical compositions of groundwater are associated with changes in geology and groundwater movement and are compared to drinking-water standards to determine suitable areas for potential groundwater resource development. Dissolved-solids concentrations in much of the Coconino aquifer water were higher than the U.S. Environmental Protection Agency’s secondary drinking-water standard of 500 milligrams per liter (mg/L) due to a buried halite body in the southeastern part of the study area. However, trace metal concentrations were generally low. Groundwater may need to be treated for high dissolved-solids concentrations before it is suitable for use as a resource for the Hopi Tribe and Navajo Nation.

Arizona↗
USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗
USGS2024

New U-Pb geochronology and geochemistry of Paleozoic metaigneous rocks from western Yukon and eastern Alaska, cross-border synthesis, and implications for tectonic models

The tectonic evolution of and relation between the Yukon-Tanana terrane and the Lake George assemblage, as well as other associated tectonic assemblages in western Yukon and eastern Alaska, have been debated for decades. The Yukon-Tanana terrane is widely considered to be an allochthonous rifted fragment derived from the Laurentian continental margin, whereas the Lake George assemblage and associated assemblages are currently interpreted to be part of the parautochthonous continental margin of western North America (Laurentia). To address these topics, we present 40 new U-Pb zircon ages and 20 new whole-rock geochemical analyses. We incorporate these data into a new compilation of available geological mapping for a large area that straddles the Alaska-Yukon border, together with 34 previously published U-Pb age determinations and an extensive geochemical database of metaigneous rocks from Late Devonian to Early Mississippian and middle to late Permian assemblages in this area. Magmatism in the Lake George assemblage and related assemblages occurred in two pulses from about 371 to 360 and from about 358 to 347 million years ago (Ma); geochemical discrimination diagrams indicate a large crustal component, possibly indicative of arc magmatism, for felsic metaigneous rocks and a range of tectonic environments for mafic rocks. Magmatism in the Fortymile River and related assemblages, and parts of the Nasina assemblage—all parts of the Yukon-Tanana terrane—are mainly Early Mississippian and span a crystallization age range from about 361 to 343 Ma; geochemical discrimination diagrams for these rocks indicate primarily arc geochemical signatures for both mafic and felsic rocks. Middle to late Permian crystallization ages (about 261–253 Ma) are indicated for felsic metaigneous rocks in the Klondike assemblage and some of the felsic metaigneous rocks in the Nasina assemblage. Based on our mapping, we propose the existence of a possible unconformity between the Mississippian and Permian felsic metavolcanic rocks within the Nasina assemblage that is marked by sporadic occurrences of stretched-pebble conglomerate. Our combined database supports the well-established model of a magmatic arc comprising the Fortymile River and Finlayson assemblages of the rifted Yukon-Tanana terrane continental fragment on which a middle to late Permian arc (Klondike assemblage) was later built. The assemblages of the Yukon-Tanana terrane were subsequently intruded by Late Triassic to Early Jurassic granitoids, presumably during reaccretion of the Yukon-Tanana terrane to the continental margin. Permian and Late Triassic to Early Jurassic intrusions have not been mapped in the now structurally lower plate Lake George assemblage; their absence is one of the lines of evidence that have been used to support the parautochthonous, rather than allochthonous, origin of the Lake George assemblage and related assemblages. Our new data, together with previously published ranges of igneous crystallization ages and geochemical tectonic signatures of the Late Devonian to Early Mississippian magmatic rocks in the Lake George assemblage and associated assemblages and in the Fortymile River, Nasina, and correlated assemblages of the Yukon-Tanana terrane, indicate that the currently accepted interpretation of the Lake George assemblage and associated rocks being part of parauthochthonous North America is not the only possible interpretation of this tectonic entity. Approximately half of the dated intrusive rocks in the Lake George assemblage are contemporaneous with the metaigneous rocks of the Yukon-Tanana terrane arc (<361 Ma). We speculate that our approximately 361 Ma U-Pb age for quartz syenite in part of the North American continental margin in south-central Yukon defines the beginning of rifting of the Laurentian margin. Although the currently favored model of prolonged middle Paleozoic subduction and extension in both the Yukon-Tanana terrane and parautochthonous North America allows for simultaneous middle Paleozoic magmatism on both sides of the Slide Mountain Ocean, we now propose an alternative hypothesis in which the Lake George assemblage represents a deeper part of the rifted Yukon-Tanana terrane arc. If this is the case, the absence of Permian and Late Triassic to Early Jurassic arc rocks in the Lake George assemblage could be explained either by the arcs of these ages not being wide enough to have affected the Lake George assemblage or by tectonic displacement of these arc rocks away from the Lake George assemblage. Our approximately 259 Ma U-Pb zircon age and geochemical analyses of metarhyolite in the Seventymile terrane in Alaska, which comprises remnants of the back-arc basin that separated the Yukon-Tanana terrane from the Laurentian continental margin, confirm the presence of a late middle Permian volcanic arc component to the terrane. Our approximately 319 Ma U-Pb zircon age from the Chicken assemblage (as redefined in this study) in eastern Alaska, combined with previously reported fossil ages and a U-Pb zircon age from this assemblage, indicate that it is a Late Mississippian to Early Pennsylvanian arc assemblage. We propose several other relatively young, locally developed arc assemblages outboard of the ancient continental margin of Laurentia that may correlate with the Chicken assemblage, but we consider its origin to remain an enigma.

Alaska↗
USGS2025

Benthic habitat map of Olowalu Reef, Maui, Hawaii—Geomorphological structure, biological cover, and geologic zonation determined with spectral, lidar, and acoustic data

The fringing coral reef off Olowalu, Maui, Hawaii, has been identified as a local conservation priority site. In 2007, the National Oceanic and Atmospheric Administration (NOAA) produced a benthic habitat map of the Hawaiian Islands that was used as a foundation for this study. To support place-based management of the reef in the future, the U.S. Geological Survey (USGS) mapped the geologic zone, major and dominant geomorphological structure, biological cover type, and percent of biological cover for 11 square kilometers (km 2 ) of Olowalu Reef at a minimum mapping unit (MMU) of 100 square meters (m 2 ) to create a benthic habitat map. Heads-up digitization was employed on 0.50-meter (m) natural color satellite orthoimagery with ancillary 1-m acoustic backscatter imagery from single-scan sonar (sound navigation and ranging). A 1-m, 4-m, and 8-m digital bathymetric model (DBM) was interpolated from bathymetric lidar (light detection and ranging), and various geomorphometric layers derived from the DBMs were used for habitat interpretation. Still-frame imagery of the seafloor extracted from vessel-towed underwater video transects on Olowalu Reef served as ground validation points ( n =870) during active mapping and accuracy assessment points ( n =216) for thematic accuracy assessment. Thematic accuracy was cross-validated by the Hawai‘i Department of Land and Natural Resources Division of Aquatic Resources. Final thematic accuracy was 88.8 percent for major structure, 85.6 percent for dominant structure, 86.0 percent for major biological cover, and 78.6 percent for type and percent of major biological cover. Reef and hardbottom constituted 52 percent of the total mapped habitat, comprising mostly aggregate reef (31 percent) and pavement (11 percent), with large swaths of spur-and-groove (9 percent). Of this hardbottom, 17 percent was covered with moderate (10 to <50 percent) coral and 27 percent with high coral cover (50 to <90 percent). High (50 to <90 percent) macroalgae cover dominated the continuous sand sheets in offshore bank/shelf zones. The map created in this study supplements the NOAA 2007 map and expands on the observations made by USGS sampling of the reef. The NOAA 2007 map and our map differed in total areal extent by a negligible 6 m 2 and were in general thematic agreement. Our map is intended to serve as a baseline for public access, general research, local-level management, and reef change for future studies.

Hawaii↗
USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗
USGS2026

Archean to Mesozoic–Cenozoic seismic crustal structure: Implications for geological and biological evolution

We use >4500 measurements of crustal structure to investigate the seismic structure of continental crust, Archean to Mesozoic–Cenozoic. The mean crustal thickness of continents, including their margins, is 36.5 km. We find that Archean, Paleoproterozoic, and Mesoproterozoic crust have similar mean crustal thickness (41 km), seismic velocities, Vp/Vs ratio, and density. Crusts of these ages span 3 Ga, from 4.0 to 1.0 Ga, and their similarity of physical properties (thickness, density, and seismic velocities) suggests that the process of crustal formation may have been similar during this time period, which covers 66% of Earth's history. Neoproterozoic crustal properties differ significantly from Mesoproterozoic and older crusts. The mean thickness of Neoproterozoic crust is 32 km, some 9 km thinner than the mean thickness of Archean, Paleoproterozoic, and Mesoproterozoic crust. A lithospheric root with a thickness of 150–200 km underlies Archean, Paleoproterozoic, and Mesoproterozoic crusts, and this root resists lithospheric rifting and crustal extension and thinning. Based on these observations, particularly the lithospheric thickness, we conclude that Archean, Paleoproterozoic, and Mesoproterozoic lithosphere are unique and together form the stable cratonic nuclei, defined as the thick (150–250 km), long-lived cores of continents. Higher mantle temperatures during the Archean, Paleoproterozoic, and Mesoproterozoic may have played a key role in the formation of the thick lithospheric roots. The second key finding is that the similarities of mean seismic properties indicate that the process of crustal formation operating in the Archean continued during the Paleoproterozoic and Mesoproterozoic. The thin (mean value < 135 km) lithospheric root beneath Neoproterozoic and younger crust may be related to the steady decrease in mantle temperature through time. Neoproterozoic and Paleozoic crust have similar physical properties, and these eras are characterized by pronounced biodiversification, including the renowned Garden of Ediacara, the Cambrian Explosion, and the Great Ordovician Biodiversification. Mesozoic–Cenozoic crust is the most diverse and reflects the current tectonic and magmatic processes of crustal formation.

Book chapter↗
USGS2026

Groundwater source water assessment area delineation of public supply wells in the Treasure Valley, western Idaho

The Idaho Department of Environmental Quality (IDEQ) is responsible for assessing the source water for public water supply systems including the delineation of source water assessment areas for wells, which are defined as the subsurface areas contributing water to a well during a period of time. Part of the IDEQ assessment plan is to update source water assessments over time. The U.S. Geological Survey (USGS) developed a new groundwater-flow model for part of the western Snake River Plain aquifer in southwestern Idaho. This groundwater- flow model provided a new opportunity for IDEQ to update source water assessment for public water supply wells within the model boundary. The USGS, in cooperation with IDEQ, used the USGS Treasure Valley Groundwater Flow Model along with a MODPATH particle tracking post-processing program to reassess public-water supply source water assessment areas. The USGS created an automated script that requests a well location, depth, and pumpage rate, and then incorporates that information into the Treasure Valley Groundwater Flow Model combined with the MODPATH model to create 3-, 6-, and 10-year time of travel zones that are output to a geographic information system shapefile. The TVSWA_Delineator script provides a fast, transparent tool for IDEQ to reassess or create new public-water supply source water assessment area delineations based on new and updated information and is available as a Python script and a Windows executable with the compiled script and all necessary components. TVSWA_Delineator utilizes a quadtree approach to rediscretize the Treasure Valley Groundwater Flow Model grid around the pumping well location from 1-mile cell lengths telescoped down to 1/16 mile. This rediscretization increases the source water assessment area delineation resolution near the pumping well and minimizes the effect of weak sinks in the MODPATH model. The stress inputs for each month of the final 10 years (2006 to 2015) of the Treasure Valley Groundwater Flow model historical simulation were averaged for the particle tracking analysis. The MODPATH model used backwards tracking of particles released at each stress period to create the source water assessment area delineations. This report documents the creation of the TVSWA_Delineator Python script, including adaptations made to the Treasure Valley Groundwater Flow Model, creation of a companion MODPATH model, and post-processing results to provide source water assessment areas.

Idaho↗
USGS2024

Revision of ModelMuse to support the use of PEST software with MODFLOW and SUTRA models

Executive Summary ModelMuse is a graphical user interface for several groundwater modeling programs. ModelMuse was updated to generate the input files for the parameter estimation software suite PEST. The software is used with MODFLOW or SUTRA models to run PEST-based parameter estimation and display the updated model inputs after parameter estimation. The PEST input files can also be used with the PEST++ version 5 software suite. Parameter estimation typically requires defining the parameters being adjusted during calibration and observations for assessing calibration quality. After a parameter is defined in ModelMuse, it can be applied to all or part of a model dataset. Pilot points—a parameterization device that facilitates higher levels of parameterization—can be used to assign spatially variable distributions of model inputs. Parameters can be applied to temporally varying features, such as boundary conditions, by either applying them to all the values in a series in one step or by applying separate parameters to individual members of a series. ModelMuse allows the definition of many observation types from various model output files. For MODFLOW 6 and SUTRA models, new options were added to ModelMuse to allow it to display the changed input after parameter estimation is complete. For MODFLOW–2005 and MODFLOW–NWT models, ModelMuse can import an entire model for visualization. An example illustrates the use of PEST with a MODFLOW 6 model in ModelMuse.

Techniques and Methods↗
USGS2025

Four-band image mosaic of the Colorado River Corridor downstream of Glen Canyon Dam in Arizona, derived from the May 2021 airborne image acquisition

In May 2021, the U.S. Geological Survey’s Grand Canyon Monitoring and Research Center acquired airborne multispectral high-resolution data for the Colorado River in the Grand Canyon, Arizona. The image data, which consist of four spectral bands (red, band 1; green, band 2; blue, band 3; and near infrared, band 4) with a ground resolution of 20 centimeters, are available as 16-bit unsigned-integer GeoTIFF files in Sankey and others (2024) (available online at https://doi.org/10.5066/P9BBGN6G ). The image files are projected in the State Plane Coordinate System, using the central Arizona zone (202) with the North American Datum of 1983 National Adjustment of 2011. The assessed spatial accuracy for these data is based on 47 ground-control points that were independent from the ground-control points used by the contractor for aerotriangulation and is reported at the 95-percent confidence level as 0.514 meter (m) and a root mean square error of 0.297 m. The intended uses of this dataset are primarily in support of scientific research and monitoring applications. Examples of these applications include high-resolution spatial and temporal change detection of the river channel, geomorphic landforms, riparian vegetation, and backwater and nearshore habitat, as well as other ecosystem-wide mapping. These imagery data also serve as reference material for field science mission planning, as base data for field data collection including community science activities, and as a highly detailed guide for technical boat operation during science activities such as reconnaissance for nighttime missions and navigating rapids during low flows.

Arizona, Nevada, Utah↗
USGS2024

Factors contributing to pesticide contamination in riverine systems: The role of wastewater and landscape sources

Wastewater treatment plant (WWTP) discharges can be a source of organic contaminants, including pesticides, to rivers. An integrated model was developed for the Potomac River watershed (PRW) to determine the amount of accumulated wastewater percentage of streamflow (ACCWW) and calculate predicted environmental concentrations (PECs) for 14 pesticides in non-tidal National Hydrography Dataset Plus Version 2.1 stream segments. Predicted environmental concentrations were compared to measured environmental concentrations (MECs) from 32 stream sites that represented a range of ACCWW and land use to evaluate model performance and to assess possible non-WWTP loading sources. Statistical agreement between PECs and MECs was strongest for insecticides, followed by fungicides and herbicides. Principal component analysis utilizing optical fluorescence and ancillary water quality data identified wastewater and urban runoff sources. Pesticides that indicated relatively larger sources from WWTPs included dinotefuran, fipronil, carbendazim, thiabendazole, and prometon whereas imidacloprid, azoxystrobin, propiconazole, tebuconazole, and diuron were more related to urban runoff. In addition, PECs generally comprised a low proportion of MECs, which indicates possible dominant loading sources beyond WWTP discharges. Cumulative potential toxicity was higher for sites with greater ACCWW and/or located in developed areas. Imidacloprid, fipronil, and carbendazim accounted for the largest portion of predicted potential toxicity across sites. The chronic aquatic life toxicity benchmarks for freshwater invertebrates were exceeded for 82 % of the imidacloprid detections ( n = 28) and 47 % of the fipronil detections ( n = 19). These results highlight the ecological implications of pesticide contamination from WWTP discharges and also the potential legacy effects from accumulated soil and groundwater sources. Pesticide management strategies that mitigate both current and historical impacts may improve the health of aquatic ecosystems.

Potomac River watershed↗
USGS2025

Gaps in water quality modeling of hydrologic systems

This review assesses gaps in water quality modeling, emphasizing opportunities to improve next-generation models that are essential for managing water quality and are integral to meeting goals of scientific and management agencies. In particular, this paper identifies gaps in water quality modeling capabilities that, if addressed, could support assessments, projections, and evaluations of management alternatives to support ecosystem health and human beneficial use of water resources. It covers surface water and groundwater quality modeling, dealing with a broad suite of physical, biogeochemical, and anthropogenic drivers. Modeling capabilities for six constituents (or constituent categories) are explored: water temperature, salinity, nutrients, sediment, geogenic constituents, and contaminants of emerging concern. Each constituent was followed through the coupled atmospheric-hydrologic-human system, with prominent modeling gaps described for a diverse array of relevant inputs, processes, and human activities. Commonly identified modeling gaps primarily fall under three types: (1) model gaps, (2) data gaps, and (3) process understanding gaps. In addition to potential solutions for addressing specific individual modeling limitations, some broad approaches (e.g., enhanced data collection and compilation, machine learning, reduced-complexity modeling) are discussed as ways forward for tackling multiple gaps. This gap analysis establishes a framework of diverse approaches that may support improved process representation, scale, and accuracy of models for a wide range of water quality issues.

Water↗
USGS1990

Effects of storm-water runoff on local ground-water quality, Clarksville, Tennessee

Storm-related water-quality data were collected at a drainage-well site and at a spring site in Clarksville, Tennessee, to define the effects of storm-water runoff on the quality of ground water in the area. A dye-trace test verified the direct hydraulic connection between the drainage well and Mobley Spring. Samples of storm run off and spring flow were collected at these sites for nine storms during the period February to October 1988. Water samples were collected also from Mobley Spring and two other springs and two observation wells in the area during dry-weather conditions to assess the general quality of ground water in an urban karst terrain. Evaluation of the effect of storm-water runoff on the quality of local ground water is complicated by the presence of other sources of contaminants in the area Concentrations and load for most major constituents were much smaller in storm-water runoff at the drainage well than in the discharge of Mobley Spring, indicating that much of the chemical constituent load discharged from the spring comes from sources other than the drainage well. However, for some of the minor constituents associated with roadway runoff (arsenic, copper, lead, organic carbon, and oil and grease), the drainage well contributed relatively large amounts of these constituents to local ground water during storms. The close correlation between concentrations of total organic carbon and concentrations of most trace metals at the drainage-well and Mobley Spring sites indicates that these constituents are transported together. Many trace metals were flushed early during each runoff event. Mean storm loads for copper, lead, zinc, and four nutrient species (total nitrogen, ammonia nitrogen, total phosphorus, and orthophosphorus) in storm-water runoff at the drainage-well site were lower than mean storm load predicted from an existing regression model. The overprediction by the model may be a result of the small size of the drainage area relative to the range of drainage areas used in the development of the models, or to the below-normal amounts of rainfall during the period of sampling for this investigation. Loads& in storm-water runoff for 22 constituents were extrapolated from sampled storms to total loads for the period February to October 1988. Calculated loads for trace metals for the period ranged from 0.030pound.s for cadmium to 12pound.s for strontium. Loads of the primary nutrients ranged from 0.97pounds for nitrite as nitrogen to 34pounds of organic nitrogen. Storm-water quality at the drainage-well and Mobley Spring sites was compared to background water quality of the local aquifer; as characterized by dry-weather samples from three springs and two observation wells in the Clarksville area. Concentrations of total-recoverable cadmium, chromium, copper, lead, and nickel were higher in many stormwater samples from both the drainage-well and Mobley Spring sites than in samples from any other site. In addition, concentrations of total organic carbon, methylene blue active substances, and total-recoverable oil and grease were generally higher in storm-water samples from the drainage-well site than in any ground-water sample. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total recoverable iron, manganese, and methylene blue active substances in storm samples from the drainage-well site exceeded the maximum contaminant levels listed in Tennessee’s drinking-water standards (1988) by as much as 2,500 and 5,500 colonies per 100 milliliters, and 2.7, 0.29, and 0.05 milligrams per liter, respectively. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total-recoverable iron, manganese, and lead in storm samples from Mobley Spring exceeded the maximum contaminant levels by as much as 500 and 4,500 colonies per 100 milliliters, and 18.7,0.65, and 0.02 milligrams per liter, respectively. For iron, manganese, and bacteria, these undesirable levels are not necessarily attributable to storm-water recharge, because concentrations of these constituents also exceeded drinking-water standards in one or more of the dry-weather samples from selected springs and observation wells in the area.

Tennessee↗