USGS Science⌕ Search

SEARCH · USGS Science

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
USGS1995

Pb2+ and Zn2+ adsorption by a natural aluminum- and iron-bearing surface coating on an aquifer sand

Pb 2+ and Zn 2+ adsorption was studied in batch experiments with material collected from a shallow, unconfined aquifer of glacial outwash sand and gravel in Falmouth, Massachusetts, USA. The aquifer solids contain primarily quartz (95% w/w), with minor amounts of alkali feldspars and ferromagnetic minerals. Pb 2+ and Zn 2+ adsorption experiments with various grain size and mineral fractions of the aquifer solids showed that (1) Zn 2+ adsorption was independent of grain size, but Pb 2+ was preferentially adsorbed by the <64 μm size fraction and (2) Pb 2+ adsorption decreased after removal of the paramagnetic, Fe-bearing mineral fraction, but Zn 2+ adsorption was unaffected. Pb 2+ and Zn 2+ adsorption on mineral separates from the aquifer material compared with metal adsorption on a purified quartz powder indicated that adsorption of both metal ions was dominated by coatings on the quartz fraction of the sediment. Characterization of the coatings by AES, SEM-EDS, and TOF-SIMS demonstrated that the natural quartz grains were extensively coated with Al- and Fe-bearing minerals of variable composition. Thin sections of quartz grains examined by TEM showed that the coatings contained both polycrystalline regions and single mineral crystals. The coating thickness varied from <10 nm up to 30 μm. The coatings were mostly resistant to dissolution by an extraction protocol designed to dissolve noncrystalline phases. The effect on metal adsorption of dissolving surface coatings from the sediment by chemical extraction was also measured. A hydroxylamine-HC] extraction designed to dissolve crystalline Fe oxide phases decreased Pb 2+ and Zn 2+ adsorption relative to untreated sediment (extracted Fe/Al ∼ 1), but Pb 2+ and Zn 2+ adsorption were not appreciably changed after sediment was extracted with dithionite-citrate (extracted Fe/Al ∼ 5). Overall, the results suggest that Pb 2+ preferred to form complexes with iron hydroxyl sites, while aluminol sites were more important for Zn 2+ adsorption. However, a definitive understanding of adsorption reactions in groundwaters will require detailed studies of the extensive coatings formed at mineral-water interfaces by chemical weathering processes.

Geochimica et Cosmochimica Acta↗
USGS1991

Application of uphole data from petroleum seismic surveys to groundwater investigations, Abu Dhabi (United Arab Emirates)

Velocity data from uphole surveys were used to map the water table and the contact at the base dune sand/top alluvium as part of a joint National Drilling Company-United States Geological Survey Ground Water Research Project in the Emirate of Abu Dhabi. During 1981–1983, a reconnaissance seismic survey was conducted for petroleum exploration in the eastern region of Abu Dhabi. Approximately 2800 kilometers of seismic data, consisting of 92 lines, were acquired in the 2500 km 2 concession area near Al Ain. Uphole surveys were conducted about 2 km apart along each seismic line, and were used to calculate weathering corrections required to further process in the seismic data. Approximately 1300 uphole surveys were completed in the concession area between March 1981 and June 1983. Reinterpretation of the velocity profiles derived from the uphole surveys provided data for determining the following subsurface layers, listed in descending order: (1) a surficial, unconsolidated weathering layer with a velocity from 300 to 450 m/s; (2) surficial dune sand, from 750 to 900 m/s; (3) unsaturated, unconsolidated alluvium, from 1000 to 1300 m/s; and (4) saturated, unconsolidated alluvium, from 1900 to 2200 m/s. Two interfaces—the water table and the base dune sand/top alluvium — were identified and mapped from boundaries between these velocity layers. Although the regional water table can fluctuate naturally as much as 3 m per year in this area and the water-table determinations from the uphole data span a 27-month period, an extremely consistent and interpretable water-table map was derived from the uphole data throughout the entire concession area. In the northern part of the area, unconfined groundwater moves northward and northwestward toward the Arabian Gulf; and in the central and southern parts of the area, groundwater moves westward away from the Oman Mountains. In the extreme southern area east of Jabal Hafit, groundwater moves southward into Oman. The map of the base dune sand/top alluvium suggests a buried paleodrainage network trending westward to southwestward away from the Oman Mountains. These paleodrainages, now buried by dune sand, probably contain alluvial fill and are logical targets for groundwater exploration.

Geoexploration↗
USGS1984

Heating of a fully saturated Darcian half-space: Pressure generation, fluid expulsion, and phase change

Analytical solutions are developed for the pressurization, expansion, and flow of one- and two-phase liquids during heating of fully saturated and hydraulically open Darcian half-spaces subjected to a step rise in temperature at its surface. For silicate materials, advective transfer is commonly unimportant in the liquid region; this is not always the case in the vapor region. Volume change is commonly more important than heat of vaporization in determining the position of the liquid-vapor interface, assuring that the temperatures cannot be determined independently of pressures. Pressure increases reach a maximum near the leading edge of the thermal front and penetrate well into the isothermal region of the body. Mass flux is insensitive to the hydraulic properties of the half-space.

International Journal of Heat and Mass Transfer↗
USGS1972

Mass spectrometric analysis of organic compounds, water and volatile constituents in the atmosphere and surface of Mars: The Viking Mars Lander

An experiment centering around a mass spectrometer is described, which is aimed at the identification of organic substances present in the top 10 cm of the surface of Mars and an analysis of the atmosphere for major and minor constituents as well as isotopic abundances. In addition, an indication of the abundance of water in the surface and some information concerning the mineralogy can be obtained by monitoring the gases produced upon heating the soil sample. The organic material will simply be expelled by heating to 150°, 300°, and 500° into the carrier gas stream of a gas chromatograph interfaced to the mass spectrometer or by slowly heating the sample in direct communication with the spectrometer. It is planned to analyze a total of up to nine soil samples in order to study diurnal and seasonal variations. The system is designed to give useful data even for minor constituents if the total of organics should be as low as 5ppm. The spectrometer covers the mass range of 12–200 with adequate resolution. The results of these experiments, which are deliberately designed to cover a wide spectrum of possibilities independent of terrestrial models, are expected to produce a good picture of the planet's organic chemistry and its possible biological significance as well as allow conclusions regarding the history of the planet's atmosphere.

Icarus↗
USGS1978

Formation of lunar basin rings

The origin of the multiple concentric rings that characterize lunar impact basins, and the probable depth and diameter of the transient crater have been widely debated. As an alternative to prevailing “megaterrace” hypotheses, we propose that the outer scarps or mountain rings that delineate the topographic rims of basins—the Cordilleran at Orientale, the Apennine at Imbrium, and the Altai at Nectaris—define the transient cavities, enlarged relatively little by slumping, and thus are analogous to the rim crests of craters like Copernicus; inner rings are uplifted rims of craters nested within the transient cavity. The magnitude of slumping that occurs on all scarps is insufficient to produce major inner rings from the outer. These conclusions are based largely on the observed gradational sequence in lunar central uplifts:. from simple peaks through somewhat annular clusters of peaks, peak and ring combinations and double ring basins, culminating in multiring structures that may also include peaks. In contrast, belts of slump terraces are not gradational with inner rings. Terrestrial analogs suggest two possible mechanisms for producing rings. In some cases, peaks may expand into rings as material is ejected from their cores, as apparently occurred at Gosses Bluff, Australia. A second process, differential excavation of lithologically diverse layers, has produced nested experimental craters and is, we suspect, instrumental in the formation of terrestrial ringed impact craters. Peak expansion could produce double-ring structures in homogeneous materials, but differential excavation is probably required to produce multiring and peak-in-ring configurations in large lunar impact structures. Our interpretation of the representative lunar multiring basin Orientale is consistent with formation of three rings in three layers detected seismically in part of the Moon—the Cordillera (basin-bounding) ring in the upper crust, the composite Montes Rook ring in the underlying, more coherent “heald” crust, and an innermost, 320-km ring at the crust-mantle interface. Depth-diameter ratios of 1 10 to 1 15 "> 110 to 115 are consistent with this interpretation and suggest that volumes of transient cavities and hence of basin ejecta may be considerably greater than commonly assumed.

Icarus↗
USGS1983

Relation of concealed faults to water quality and the formation of solution features in the Floridan aquifer, northeastern Florida, U.S.A.

Geological and hydrological information on the Floridan aquifer in northeastern Florida indicates that isolated occurrences of water having relatively high chloride concentration in the upper part of the aquifer may be associated with buried faults. Water having chloride concentrations of more than 700 mg l −1 occurs in the deeper zone of the aquifer at depths below ∼ 600 m below sea level in the coastal and east-central part of the study area. This deep salty water is under higher artesian pressure than water in the shallower, generally freshwater zones, but it is restricted from moving upward by relatively impermeable dolomite beds. Two buried faults with vertical displacements of 30–45 m are in areas where relatively high concentrations of chloride have been detected in water in the upper part of the aquifer. Geochemical, artesian pressure, and water temperature data show that the source of the relatively high concentrations of chloride in water in the upper part of the aquifer is from the deeper zone. This indicates that the faults may have breached the dolomite confining beds and allowed the upward movement of salty water from the deeper zone. The upward movement of mineralized water along the faults may also have formed some of the solution features found in the aquifer near the faults. In this area, freshwater in the upper part of the aquifer is normally saturated with respect to calcite and dolomite. However, water from wells tapping the upper part of the aquifer near the faults is not fully saturated suggesting that the mixing of deep mineralized water with shallower freshwater produces a mixture that is not saturated with respect to these minerals and allows for the dissolution of limestone in the aquifer near the faults. Dissolution of limestone may also be occurring at the freshwater-saltwater interface in the deeper zones of the aquifer.

Florida↗
USGS1990

Simulation of dispersion in layered coastal aquifer systems

A density-dependent solute-transport formulation is used to examine ground-water flow in layered coastal aquifers. The numerical experiments indicate that although the transition zone may be thought of as an impermeable 'sharp' interface with freshwater flow parallel to the transition zone in homogeneous aquifers, this is not the case for layered systems. Freshwater can discharge through the transition zone in the confining units. Further, for the best simulation of layered coastal aquifer systems, either a flow-direction-dependent dispersion formulation is required, or the dispersivities must change spatially to reflect the tight thin confining unit.

Journal of Hydrology↗
USGS1991

Geochemistry of dissolved inorganic carbon in a Coastal Plain aquifer. 1. Sulfate from confining beds as an oxidant in microbial CO2 production

A primary source of dissolved inorganic carbon (DIC) in the Black Creek aquifer of South Carolina is carbon dioxide produced by microbially mediated oxidation of sedimentary organic matter. Groundwater chemistry data indicate, however, that the available mass of inorganic electron acceptors (oxygen, Fe(III), and sulfate) and observed methane production is inadequate to account for observed CO 2 production. Although sulfate concentrations are low (approximately 0.05–0.10 mM) in aquifer water throughout the flow system, sulfate concentrations are greater in confining-bed pore water (0.4–20 mM). The distribution of culturable sulfate-reducing bacteria in these sediments suggests that this concentration gradient is maintained by greater sulfate-reducing activity in sands than in clays. Calculations based on Fick's Law indicate that possible rates of sulfate diffusion to aquifer sediments are sufficient to explain observed rates of CO 2 production (about 10 −5 mmoll −1 year −1 ), thus eliminating the apparent electron-acceptor deficit. Furthermore, concentrations of dissolved hydrogen in aquifer water are in the range characteristic of sulfate reduction (2–6 nM), which provides independent evidence that sulfate reduction is the predominant terminal electron-accepting process in this system. The observed accumulation of pyrite- and calcite-cemented sandstones at sand-clay interfaces is direct physical evidence that these processes have been continuing over the history of these sediments.

Journal of Hydrology↗
USGS1990

Inorganic geochemistry of surface sediments of the Ebro shelf and slope, northwestern Mediterranean

Distributions of major, minor, and trace elements in surface sediment of the continental shelf and upper slope of the northeastern Spanish continental margin reflect the influences of discharge from the Ebro River and changes in eustatic sea levels. Multivariate factor analysis of sediment geochemistry was used to identify five groupings of samples (factors) on the shelf and slope. The first factor is an aluminosilicate factor that represents detrital clastic material. The second factor is a highly variable amount of excess SiO 2 and probably represents a quartz residuum originating from winnowing of relict detrital sediments. A carbonate factor (Factor 3) has no positive correlation with other geochemical parameters but is associated with the sand-size fraction. The carbonate in these sediments consists of a mixture of biogenic calcite and angular to subangular detrital grains. Organic carbon is associated with the aluminosilicate factor (Factor 1) but also factors out by itself (Factor 4); this suggests that there may be two sources of organic matter, terrestrial and marine. The fifth factor comprises upper slope sediments that contain high concentrations of manganese. The most likely explanation for these high manganese concentrations is precipitation of Mn oxyhydroxides at the interface between Mn-rich, oxygen-deficient, intermediate waters and oxygenated surface waters.

Marine Geology↗
USGS1991

Effect of phosphorus deficiency on spectral reflectance and morphology of soybean plants

Soybean plants were grown in hydroponic solutions having three concentration levels of phosphorus. Spectral reflectance changes included higher reflectance in the green and yellow portions of the electromagnetic spectrum in phosphorus-deficient plants and a difference in position of the long wavelength edge (the red edge) of the chlorophyll absorption band centered near 0.68 ??m. Plants having the least phosphorus in the growing medium did not show the normal shift of the red edge to longer wavelength which occurs as leaves mature. Shoot and root biomass were significantly lower in the phosphorus-deficient plants. These results are consistent with those obtained when soybean plants are dosed with elevated concentrations of metallic elements. We hypothesize that nutrient imbalances or anomalous metal concentrations in the soil set up physiological conditions at the soil/root interface that are responsible for the reflectance differences observed in laboratory and field studies of plants growing in substrates enriched in metallic elements.

Remote Sensing of Environment↗
USGS1984

Regional variations in the fluvial Upper Devonian and Lower Mississippian(?) Kanayut Conglomerate, Brooks Range, Alaska

The wholly allochthonous Upper Devonian and Lower Mississippian(?) Kanayut Conglomerate is one of the most extensive fluvial deposits in North America. It crops out for 950 km along the crest of the Brooks Range in a series of thrust plates and is as thick as 2615 m. The Kanayut forms the fluvial part of a large, coarse-grained delta. The lower part of the Kanayut (the Ear Peak Member) overlies marginal-marine and prodelta turbidite deposits and consists of fining-upward meandering-stream-channel cycles of conglomerate and sandstone within black to maroon floodplain shale deposits. The middle part of the Kanayut (the Shainin Lake Member) lacks shale and consists of fining-upward couplets of channelized conglomerate and parallel- to cross-stratified sandstone interpreted as braidplain deposits. These deposits contain the largest clasts (23 cm) and were deposited during maximum progradation of the fluvial sequence. The upper part of the Kanayut (the Stuver Member), which consists of fining-upward meandering stream cycles similar to those of the lower part, grades upward into overlying Lower Mississippian tidal and marginal-marine deposits. Paleocurrent data and distribution of largest clasts indicate that the Kanayut was deposited by southwest-flowing streams fed by at least two major trunk streams that drained a mountainous region to the north and east. Comparison of stratigraphic and sedimentologic data collected at three selected locations representative of proximal, intermediate and distal parts of the Kanayut basin reveal regional variations in its fluvial character. These include a decrease in total thickness of fluvial strata, an increase in total thickness of associated marine sandstone, the pinch-out of the coarse-grained middle part of the Kanayut and decreases in the conglomerate/sandstone and sandstone/shale ratios from proximal to distal areas of the basin. The coarse-grained parts of the fluvial cycles decrease in thickness and lateral extent from proximal to distal areas of the basin. In more distal areas of sedimentation, the middle parts of some fluvial cycles consist of calcareous and bioturbated marine sandstone. Although thinner than in more proximal areas, the associated fine-grained upper parts of some cycles also contain marine features and suggest that these strata represent the deposits of interdistributary bays. These features are interpreted to indicate that the proximal deposits of the Kanayut Conglomerate were deposited by large, stable fine-grained meandering rivers (the Ear Peak and Stuver Members) and gravelly braided rivers (Shainin Lake Member) on the upper delta plain of the Kanayut delta. Sedimentation in more distal locations, interpreted to represent lower delta plain deposits, was by smaller distributary rivers with characteristics of both braided and meandering streams. Near their interface with marginal marine deposits the fluvial deposits were locally strongly influenced by tidal or estuarine conditions. ?? 1984.

Sedimentary Geology↗
USGS1988

Pin stripe lamination: A distinctive feature of modern and ancient eolian sediments

Pin stripe laminations are a distinctive feature of modern and ancient eolian sediments. In sets of eolian ripple (or translatent) strata they represent deposition of silt and very fine sand in the troughs of the advancing wind ripples. In sets of avalanche strata they probably result from the downward settling of fine sand and silt within the moving avalanche to the interface of moving and unmoving sands. Wind tunnel experiments suggest that pin stripe laminations can also form in grainfall deposits. The textural segregation associated with deposition of the fine layers in most cases leads to early cementation along and near the finest sand and silt comprising the pin stripe lamination. The pin stripe effect seen in outcrops is usually due to resistance to weathering along such cemented zones. The cementation of the pin stripe laminations can occur early in the history of diagenesis and thus may provide clues to the post-depositional history of the rock. Pin stripe laminations in many instances represent the sequestering of the small population of ultrafine sediment present in most eolian depositional systems. They may prove useful in the recognition of ancient eolian sediments.

Sedimentary Geology↗
USGS1983

Accumulation of fossil fuels and metallic minerals in active and ancient rift lakes

A study of active and ancient rift systems around the world suggests that accumulations of fossil fuels and metallic minerals are related to the interactions of processes that form rift valleys with those that take place in and around rift lakes. The deposition of the precursors of petroleum, gas, oil shale, coal, phosphate, barite, Cu-Pb-Zn sulfides, and uranium begins with erosion of uplifted areas, and the consequent input of abundant nutrients and solute loads into swamps and tectonic lakes. Hot springs and volcanism add other nutrients and solutes. The resulting high biological productivity creates oxidized/reduced interfaces, and anoxic and H 2 S-rich bottom waters which preserves metal-bearing organic tissues and horizons. In the depositional phases, the fine-grained lake deposits are in contact with coarse-grained beach, delta, river, talus, and alluvial fan deposits. Earthquake-induced turbidites also are common coarse-grained deposits of rift lakes. Postdepositional processes in rifts include high heat flow and a resulting concentration of the organic and metallic components that were dispersed throughout the lakebeds. Postdepositional faulting brings organic- and metal-rich sourcebeds in contact with coarse-grained host and reservoir rocks. A suite of potentially economic deposits is therefore a characteristic of rift valleys.

Tectonophysics↗
USGS1994

Seismic structure of the uppermost mantle beneath the Kenya rift

A major goal of the Kenya Rift International Seismic Project (KRISP) 1990 experiment was the determination of deep lithospheric structure. In the refraction/wide-angle reflection part of the KRISP effort, the experiment was designed to obtain arrivals to distances in excess of 400 km. Phases from interfaces within the mantle were recorded from many shotpoints, and by design, the best data were obtained along the axial profile. Reflected arrivals from two thin (< 10 km), high-velocity layers were observed along this profile and a refracted arrival was observed from the upper high-velocity layer. These mantle phases were observed on record sections from four axial profile shotpoints so overlapping and reversed coverage was obtained. Both high-velocity layers are deepest beneath Lake Turkana and become more shallow southward as the apex of the Kenya dome is approached. The first layer has a velocity of 8.05-8.15 km/s, is at a depth of about 45 km beneath Lake Turkana, and is observed at depths of about 40 km to the south before it disappears near the base of the crust. The deeper layer has velocities ranging from 7.7 to 7.8 km/s in the south to about 8.3 km/s in the north, has a similar dip as the upper one, and is found at depths of 60-65 km. Mantle arrivals outside the rift valley appear to correlate with this layer. The large amounts of extrusive volcanics associated with the rift suggest compositional anomalies as an explanation for the observed velocity structure. However, the effects of the large heat anomaly associated with the rift indicate that composition alone cannot explain the high-velocity layers observed. These layers require some anisotropy probably due to the preferred orientation of olivine crystals. The seismic model is consistent with hot mantle material rising beneath the Kenya dome in the southern Kenya rift and north-dipping shearing along the rift axis near the base of the lithosphere beneath the northern Kenya rift. This implies lithosphere thickening towards the north and is consistent with a thermal thinning of the lithosphere from below in the south changing to thinning of the lithosphere due to stretching in the north.

Tectonophysics↗
USGS1991

UDATE1: A computer program for the calculation of uranium-series isotopic ages

UDATE1 is a FORTRAN-77 program with an interface for an Apple Macintosh computer that calculates isotope activities from measured count rates to date geologic materials by uranium-series disequilibria. Dates on pure samples can be determined directly by the accumulation of 230Th from 234U and of 231Pa from 235U. Dates for samples contaminated by clays containing abundant natural thorium can be corrected by the program using various mixing models. Input to the program and file management are made simple and user friendly by a series of Macintosh modal dialog boxes. ?? 1991.

Computers & Geosciences↗
USGS1994

Indicators of sewage contamination in sediments beneath a deep-ocean dump site off New York

The world's largest discharge of municipal sewage sludge to surface waters of the deep sea has caused measurable changes in the concentration of sludge indicators in sea-floor sediments, in a spatial pattern which agrees with the predictions of a recent sludge deposition model. Silver, linear alkylbenzenes, coprostanol, and spores of the bacterium Clostridium perfringens, in bottom sediments and in near-bottom suspended sediment, provide evidence for rapid settling of a portion of discharged solids, accumulation on the sea floor, and biological mixing beneath the water sediment interface. Biological effects include an increase in 1989 of two species of benthic polychaete worm not abundant at the dump site before sludge dumping began in 1986. These changes in benthic ecology are attributed to the increased deposition of utilizable food in the form of sludge-derived organic matter.

New Jersey, New York↗
USGS1996

Determination of nitroaromatic explosives and their degradation products in unsaturated-zone water samples by high-performance liquid chromatography with photodiode-array, mass spectrometric, and tandem mass spectrometric detection

Mass spectrometry and tandem mass spectrometry, coupled by a thermospray interface to a high-performance liguid chromatography system and equipped with a photodiode array detector, were used to determine the presence of nitroaromatic explosives and their degradation products in USA unsaturated-zone water samples. Using this approach, the lower limits of quantitation for explosives determined by mass spectrometry in this study typically ranged from 10 to 100 ng/l.

TrAC - Trends in Analytical Chemistry↗
USGS1993

Geologic research in support of sustainable agriculture

The importance and role of the geosciences in studies of sustainable agriculture include such traditional research areas as, agromineral resource assessments, the mapping and classification of soils and soil amendments, and the evaluation of landscapes for their vulnerability to physical and chemical degradation. Less traditional areas of study, that are increasing in societal importance because of environmental concerns and research into sustainable systems in general, include regional geochemical studies of plant and animal trace element deficiencies and toxicities, broad-scale water quality investigations, agricultural chemicals and the hydrogeologic interface, and minimally processed and ion-exchange agrominerals. We discuss the importance and future of phosphate in the US and world based on human population growth, projected agromineral demands in general, and the unavailability of new, high-quality agricultural lands. We also present examples of studies that relate geochemistry and the hydrogeologic characteristics of a region to the bioavailability and cycling of trace elements important to sustainable agricultural systems.

Agriculture, Ecosystems and Environment↗