USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
USGS2018

Hydrogeophysics at societally relevant scales: Airborne electromagnetic applications and model structural uncertainty quantification

There is a critical and growing need for information about subsurface geological properties and processes over sufficiently large areas that can inform key scientific and societal studies. Airborne geophysical methods fill a unique role in Earth observation because of their ability to detect deep subsurface properties at regional scales and with high spatial resolution that cannot be achieved with groundbased measurements. Airborne electromagnetics, or AEM, is one technique that is rapidly emerging as a foundational tool for geological mapping, with widespread application to studies of water and mineral resources, geologic hazards, infrastructure, the cryosphere, and the environment. Applications of AEM are growing worldwide, with rapid developments in instrumentation and data analysis software. In this study, we summarize several recent hydrogeophysical applications of AEM, including examples drawn from a recent survey in the Mississippi Alluvial Plain (MAP). In addition, we discuss developments in computational methods for geophysical and geological model structural uncertainty quantification using AEM data, and how these results are used in a sequential hydrogeophysical approach to characterize hydrologic parameters and prediction uncertainty.

Conference Paper↗
USGS1974

Geologic map of the Monrovia Quadrangle, Liberia

As part of a program undertaken cooperatively by the Liberian Geological Survey and the U. S. Geological Survey, under the sponsorship of the Government of Liberia and the Agency for International Development, U. S. Department of State, Liberia was mapped by geologic and geophysical methods during the period 1965 to 1972.- The resulting geologic and geophysical maps are published in ten folios, each covering one quadrangle (see index map). The Monrovia quadrangle was systematically mapped by the author from June 1971 to July 1972. Field data provided by private companies and other members of the LGS-USGS project were used in map compilation, and are hereby acknowledged. Interpretation of gravity data (Behrendt and Wotorson, 1974, c), and total-intensity aeromagnetic and total count gamma radiation surveys (Behrendt and Wotorson, 1974, a, and b) were also used in the compilation, as were other unpublished geophysical data furnished by Behrendt and Wotorson (near-surface, regional magnetic component, and geologic correlations based on aeromagnetic and radiometric characteristics).

Monrovia Quadrangle↗
USGS2011

Digitized data from ground geophysical surveys in Afghanistan: A website for distribution of data

This document describes the process of digitization of a 1974 report on geophysical work undertaken by Soviet geophysicists in southern and eastern Afghanistan. These data, uncovered in Afghanistan, represent magnetic and electrical ground surveys for which locations are not well defined. Due to lack of location information, these surveys were georeferenced using the cities, rivers, and surrounding geology found on the maps used to plot survey locations. A geologic map found in the Soviet report contains profile lines that correspond to the geophysical maps, allowing these data to be georeferenced. The profiles correspond to sets of resistivity, chargeabiliy, and magnetic data. Some datasets were presented as graphs and needed to be gridded into a useable image. Only the vertical component of the magnetic field was collected, so conversion to total field anomaly was necessary. The magnetic data were collected in either gammas or milliorstead, both of which required conversion to standard SI units. To be useful to modern studies, the datasets and images contained in this report have been digitized, georeferenced, and in some cases converted into computer-ready formats.

Open-File Report↗
USGS2020

Passive seismic survey of sediment thickness, Dasht-e-Nawar basin, eastern Afghanistan

Exploration of water resources is needed for public supply, extraction of mineral resources, and economic development in Afghanistan. Remotely-sensed data are useful for identifying the general nature of surface sediments, however, “boots on the ground” geophysical surveys or drilling programs are needed to quantify the thickness of sediments or aquifers. The nature of such investigations presents a risk to field crews that may prohibit exploration of potentially valuable aquifers or mineral resources. The Dasht-e-Nawar basin, in east-central Afghanistan, contains a 400 km2 playa that includes evaporative mineral deposits, particularly lithium, which has been of interest since the 1970s. However, exploration of the basin, as with many areas of Afghanistan, has been hampered by decades of conflict. In 2014, an investigation of the basin was conducted by the U.S. Department of Defense Task Force for Business and Stability Operations (TFBSO), and their contractor, in cooperation with the U.S. Geological Survey (USGS). For this investigation the USGS compared the results of a rapid passive seismic survey of basin sediment thickness to the results of an independently conducted gravity survey of the same area. Each point measurement for the passive seismic method requires less than 30 minutes in the field by one person. The technique utilizes ambient seismic noise without an external sound source such as required by traditional seismic surveys. Additionally, the technique does not require external sensor arrays, which can be kilometers long for some geophysical techniques. The passive seismic equipment used in this study weighs approximately 1 kilogram and is about 10 cm3 in size. Although relatively new for assessment of sediment thickness, several investigations have found this method to be capable of estimating sediment thicknesses, in the 10’s to 1000 meter range, in settings with unconsolidated sediment over bedrock and a contrast in acoustic impedance. In this investigation, the gravity survey was conducted during a period of 3 weeks by an experienced field crew; required a detailed, centimeter-scale land elevation survey; and required laboratory analyses of sediment and rock densities to interpret the gravity data. In contrast, the passive seismic survey was collected by two inexperienced operators over a period of 8 days and required no additional data to interpret. Due to security restrictions, USGS personnel could not visit the site and the seismic operator was trained immediately prior to the field work. Although the quality of the seismic survey was affected by strong afternoon winds, and by the inexperience of the field operator, the results were fairly comparable to the gravity survey. Similar basin sediment thicknesses and patterns in sediment thickness were identified by both surveys in the basin with an estimated maximum thickness of approximately 170 m. The passive seismic technique required substantially less field resources and time than would be required by other geophysical surveys. Although this method will not be effective in all geologic settings, it may be a valuable assessment tool for use before conducting other, more intensive, geophysical efforts or drilling programs, especially in regions with elevated security risks such as Afghanistan.

Dasht-e-Nawar basin↗
USGS2003

Data report for the main line of the PSINE seismic survey across the San Andreas Fault and SAFOD Site near Parkfield, California

In October and November 1998, the U.S. Geological Survey, Virginia Polytechnic Institute, Stanford University, and Geometrics Corporation jointly acquired a highresolution seismic reflection/refraction profile across the San Andreas Fault Zone (SAFZ) and the proposed San-Andreas-Fault-Observatory-at-Depth (SAFOD) drill site located near Parkfield, California (Fig. 1a). We refer to this seismic survey as the Parkfield Seismic Imaging-Ninety Eight (PSINE) survey, the highest-resolution seismic survey yet completed across the SAF in central California. This report, which presents acquisition parameters and example shot gathers for the PSINE seismic survey, is intended to provide necessary information for those who wish to use the PSINE data for research. The PSINE survey is part of the proposed SAFOD investigation: a proposed study to investigate physical and chemical properties and processes that control deformation and earthquake generation within the SAF zone by drilling into the active trace of the fault (Zoback et al., 1998; www.earthscope.org). Geological and geophysical investigations are planned prior to, during, and after completion of the borehole. The PSINE survey, which was one of the pre-drilling investigations, was designed to determine the subsurface stratigraphic and structural relations in the vicinity of the proposed drill site, to better locate the target fault zone within the subsurface, and to image obstacles that may impede drilling. Data acquisition parameters, experiment setup, and parameters needed to work with the PSINE data are provided in this report. The PSINE data provide useful reflective images (Catchings et al., in prep; Rymer et al., in prep; Hole et al.,) and velocity data (Catchings et al., 2002) in the vicinity of the SAFOD drill site and the San Andreas fault.

California↗
USGS2019

Transmissivity and geophysical data for selected wells at and near the Idaho National Laboratory, Idaho, 2017–18

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, conducted aquifer tests during 2017–18 on 101 wells at and near the Idaho National Laboratory, Idaho, to define the hydraulic characteristics for individual wells. These were short-duration aquifer tests, conducted with a limited number of observations during routine sampling. Pumped intervals (water columns) for individual wells ranged from 12 to 790 feet (ft). Semi-constant discharge rates during aquifer testing ranged from 1 to 45 gallons per minute, water-level response to pumping ranged from no observed drawdown to 52.4 ft, and length of aquifer tests for individual wells ranged from 10 to 160 minutes. Individual well data were analyzed to estimate the capacity of the well to produce water (specific capacity) and to estimate values for transmissivity. Estimates of specific capacity for individual wells ranged from less than 1.0 to greater than (>) 3.0 × 10 3 gallons per minute per foot; estimates of transmissivity for individual wells ranged from 2.0 to >5.4 x 10 5 feet squared per day. Geophysical log data, well construction information, and general geology for individual wells were presented and included in this report. Basic hydrogeologic features for individual wells were described, along with a composite of natural gamma, neutron, gamma-gamma dual density, and acoustic televiewer data (when available). The geophysical and geologic data were used to suggest the location and thickness of sediment layers along with fractured and dense basalt areas for individual wells. Geophysical data were used to describe the general geology where geologic descriptions and (or) driller notes were not available.

Idaho↗
USGS2014

The Piezometric surface of artesian water in the Florida peninsula

The ground‐ water of the Florida Peninsula constitutes one of its most valuable natural resources and is of importance as a source of water ‐supplies throughout the area. The problems relating to the development of ground‐ water supplies are both quantitative and qualitative. They include such problems as the decline in yield of wells in areas of large withdrawals of water and salt‐ water contamination of ground‐ water supplies. In order to facilitate a better understanding and interpretation of hydrologic conditions relating to these local ground‐ water problems, a general survey of the artesian water in the Florida Peninsula was made by the United States Geological Survey in 1934.

Florida↗
USGS2014

Report of committee on glaciers, 1940–41

The personnel of the Committee is now as follows: Harry Fielding Reid, Professor Emeritus of Geology, Johns Hopkins University, 608 Cathedral Street, Baltimore, Maryland; William H. Hobbs, Professor Emeritus of Geology, University of Michigan, Ann Arbor, Michigan; Lawrence Martin, Chief of the Division of Maps, Library of Congress, Washington, D.C.; J. E. Church, Professor of Meteorology, Agricultural Experiment Station, University of Nevada, Reno, Nevada; Wm. Osgood Field, Jr., Explorer, 18 West Twelfth Street, New York, New York; Oliver Kehrlein, Chairman, Committee on Glacier Studies of Sierra Club, 1050 Mills Tower, 220 Bush Street, San Francisco, California; Kenneth N. Phillips, Associate Hydraulic Engineer, Water Resources Branch, United States Geological Survey, Chairman, Research Committee of the Mazamas, 606 Post‐Office Building, Portland, Oregon; William S. Cooper, Professor of Botany, University of Minnesota, Minneapolis, Minnesota; Gerald Fitzgerald, Senior Topographic Engineer, Alaska Branch, United States Geological Survey, Washington, D.C.; Laurence M. Gould, Professor of Geology, Carleton College, Northfield, Minnesota; Dr. Max Demorest, Department of Geology, Yale University, New Haven, Connecticut; François E. Matthes (Chairman), Senior Geologist, Section of Glacial Geology, United States Geological Survey, Washington, D.C.

Eos, Transactions, American Geophysical Union↗
USGS2014

Magnetic susceptibility data for some exposed bedrock in the western conterminous United States

In-place rock magnetic susceptibility measurements for 746 sites in the western conterminous United States are reported in a database. Of these 746 sites, 408 sites are in the Silverton Caldera area of the San Juan Mountains of southwestern Colorado. Of the 408 sites in the Silverton Caldera area, 106 sites are underground. The remaining 338 sites outside the Silverton Caldera area were on outcropping rock, are distributed from southern Arizona to northwestern Wyoming, and include data from California, Nevada, Utah, Colorado, and New Mexico. Rock-density measurements are included for some sites. These data have been collected by various U.S. Geological Survey studies from 1991 through 2012 and are intended to help improve geophysical modeling of the Earth’s crust in the Western United States. A map-based graphical user interface is included to facilitate use of the data.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2002

Modeling GPR data to interpret porosity and DNAPL saturations for calibration of a 3-D multiphase flow simulation

Dense nonaqueous phase liquids (DNAPLs) are a pervasive and persistent category of groundwater contamination. In an effort to better understand their unique subsurface behavior, a controlled and carefully monitored injection of PCE (perchloroethylene), a typical DNAPL, was performed in conjunction with the University of Waterloo at Canadian Forces Base Borden in 1991. Of the various geophysical methods used to monitor the migration of injected PCE, the U.S. Geological Survey collected 500-MHz ground penetrating radar (GPR) data. These data are used in determining calibration parameters for a multiphase flow simulation. GPR data were acquired over time on a fixed two-dimensional surficial grid as the DNAPL was injected into the subsurface. Emphasis is on the method of determining DNAPL saturation values from this time-lapse GPR data set. Interactive full-waveform GPR modeling of regularized field traces resolves relative dielectric permittivity versus depth profiles for pre-injection and later-time data. Modeled values are end members in recursive calculations of the Bruggeman-Hanai-Sen (BHS) mixing formula, yielding interpreted pre-injection porosity and post-injection DNAPL saturation values. The resulting interpreted physical properties of porosity and DNAPL saturation of the Borden test cell, defined on a grid spacing of 50 cm with 1-cm depth resolution, are used as observations for calibration of a 3-D multiphase flow simulation. Calculated values of DNAPL saturation in the subsurface at 14 and 22 hours after the start of injection, from both the GPR and the multiphase flow modeling, are interpolated volumetrically and presented for visual comparison.

Open-File Report↗
USGS1979

New geologic, ground magnetic, E-mode VLF, and radiometric surveys at Phillips Mine-Camp Smith uranium prospect, Westchester and Putnam Counties, New York

This report updates U.S. Geological Survey Open-File Report 77-780 by including new field data taken in July 1978. A revised geologic map is included, as are new geophysical data from an approximately 0.3-km by 0.5-km area just northeast of and adjoining the area surveyed earlier. The pattern which had been observed to the southwest of spatially coincident radiometric highs, magnetic highs, and resistivity lows deteriorates to the northeast: there the radiometric highs fall on magnetic lows and the correlation with resistivity lows disappears.

New York↗
USGS2009

Direct-current resistivity profiling at the Pecos River Ecosystem Project study site near Mentone, Texas, 2006

The U.S. Geological Survey, in cooperation with Texas A&M University AgriLife, did a surface geophysical investigation at the Pecos River Ecosystem Project study site near Mentone in West Texas intended to determine shallow (to about 14 meters below the water [river] surface) subsurface composition (lithology) in and near treated (eradicated of all saltcedar) and control (untreated) riparian zone sites during June-August 2006. Land-based direct-current resistivity profiling was applied in a 240-meter section of the riverbank at the control site, and waterborne direct-current continuous resistivity profiling (CRP) was applied along a 2.279-kilometer reach of the river adjacent to both sites to collect shallow subsurface resistivity data. Inverse modeling was used to obtain a nonunique estimate of the true subsurface resistivity from apparent resistivity calculated from the field measurements. The land-based survey showed that the sub-surface at the control site generally is of relatively low resis-tivity down to about 4 meters below the water surface. Most of the section from about 4 to 10 meters below the water surface is of relatively high resistivity. The waterborne CRP surveys convey essentially the same electrical representation of the lithology at the control site to 10 meters below the water surface; but the CRP surveys show considerably lower resistivity than the land-based survey in the subsection from about 4 to 10 meters below the water surface. The CRP surveys along the 2.279-kilometer reach of the river adjacent to both the treated and control sites show the same relatively low resistivity zone from the riverbed to about 4 meters below the water surface evident at the control site. A slightly higher resistivity zone is observed from about 4 to 14 meters below the water surface along the upstream approximately one-half of the profile than along the downstream one-half. The variations in resistivity could not be matched to variations in lithology because sufficient rock samples were not available.

Texas↗
USGS2006

High-resolution geologic mapping of the inner continental shelf: Nahant to Gloucester, Massachusetts

This report presents high-resolution maps of the seafloor offshore of Massachusetts, from Nahant to Gloucester. Approximately 134 km² of the inner shelf were mapped with a focus on the nearshore region in water depths less than 40 m (fig. 1.1). The maps were prepared as part of a cooperative mapping program between the U.S. Geological Survey (USGS) and the Massachusetts Office of Coastal Zone Management (CZM). They are based on marine geophysical data, sediment sampling, and bottom photography obtained on two research cruises carried out in 2003 and 2004. The primary objective of this program is to develop a suite of seafloor maps that provide geologic information for management of coastal and marine resources. Accurate maps of seafloor geology are important first steps toward protecting fish habitat, delineating marine reserves, and assessing environmental changes due to natural or human impacts. The maps also provide a geologic framework for scientific research, industry and the public. The organization of this report is outlined in the navigation bar along the left-hand margin of the page. This is section 1, the introduction. Section 2 briefly describes the mapping products contained in this report and has links to large-format map sheets, that can be viewed on line or downloaded. Section 3 is a description of the data collection, processing, and analysis procedures used to create the map products. Section 4 examines the geologic framework and late Quaternary evolution of the region, and presents two different strategies for mapping the complex seafloor. This report also contains four appendices that include GIS layers of all data collected in this study, and copies of the sample and photographic data used to validate the interpretations.

Massachusetts↗
USGS1999

Application of aerial gamma-ray spectrometric and magnetic surveys in geologic mapping: a case study in southern Virginia and northern North Carolina

Aerial gamma-ray spectrometric and magnetic survey maps are valuable aids for geologic mapping where rocks are poorly exposed in south-central Virginia and northernmost North Carolina. Broad low areas on the potassium and thorium gamma-ray survey maps distinguish the Carolina, Spring Hope, and Roanoke Rapids terranes from more highly radiogenic areas of the Raleigh and Triplet terranes, reflecting differences in the compositions of residual soils. Granitic rocks are delineated most clearly by potassium highs and less clearly by thorium highs. Nearly all the thorium highs other than those related to granites are associated with amphibolite-facies rocks of the Raleigh and Triplet terranes. Contrasting thorium lows within these terranes help to distinguish the individual rock units. In the Carolina and Roanoke Rapids terranes, high-gradient magnetic patterns delineate stratified metavolcanic and metasedimentary units that are not discernible from the gamma-ray surveys. Circular magnetic highs coincide with gabbro plutons, and numerous magnetic lineaments correspond to Jurassic diabase dikes. Magnetically uniform, low-gradient areas coincide with less mafic plutons. A magnetic lineament (high) coincides with the Nutbush Creek fault zone, and other faults are distinguished as boundaries between zones of contrasting geophysical properties. The gamma-ray spectrometric and magnetic survey maps most effectively indicate geologic features in the region if they are employed collectively, and if they are interpreted in concert with simultaneous geologic field investigations.

North Carolina;Virginia↗
USGS2014

The shallow stratigraphy and sand resources offshore from Cat Island, Mississippi

In collaboration with the U.S. Army Corps of Engineers, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center collected over 487 line kilometers (> 300 miles) of high-resolution geophysical data around Cat Island, Mississippi, to improve understanding of the island's geologic evolution and identify potential sand resources for coastal restoration. In addition, 40 vibracores were collected on and around the island, generating more than 350 samples for grain-size analysis. The results indicate that the geologic evolution of Cat Island has been influenced by deltaic, lagoonal/estuarine, tidal, and oceanographic processes, resulting in a stratigraphic record that is quite complex. The region north of the island is dominated by lagoonal/estuarine deposition, whereas the region south of the island is dominated by deltaic and tidal deposition. In general, the veneer of modern sediment surrounding the island is composed of newly deposited sediment and highly reworked relict sediments. The region east of the island shows the interplay of antecedent barrier-island change with delta development despite a significant ravinement of sediments. The data show from little to no modern sediment east of the island, exposing relict sediments at the seafloor. Finally, the data reveal four subaqueous sand units around the island. Two of the units are northwest of the modern island and one is southwest. Given the dominant, westward, longshore transport along the Mississippi and Alabama barrier islands, the geographic location of these three units suggests that they do not contribute to the modern sediment budget of Cat Island. The last unit is directly east of the island and represents the antecedent island platform that has supplied sand over geologic time for creation of the spits that form the eastern shoreline. Because of its location east of the island, the antecedent island unit may still supply sediment to the island today.

Mississippi↗
USGS2014

Geologic and geophysical data for wells drilled at Raft River Valley, Cassia County, Idaho, in 1977-1978 and data for wells drilled previously

In order to better define the size of the thermal anomaly in the Raft River Valley, Idaho, the U.S. Geological Survey drilled a series of intermediate-depth (nominal 500-ft depth) wells in 1977 and 1978. This report presents geologic, geophysical, and temperature data for these drill holes, along with data for five wells drilled by the Idaho National Engineering Laboratory with U.S. Department of Energy Funding. Data previously reported for other drill holes are also included in order to make them available as digital files. For purposes of defining the thermal anomaly for the geothermal system, temperature gradients are calculated over long depth intervals on the basis of the appearance of reasonable linear segments on a temperature versus plot depth. Temperature versus depth data for some drill holes can be represented by a single gradient, whereas others require multiple gradients to match the data. Data for some drill holes clearly reflect vertical flows of water in the formation surrounding the drill holes, and water velocities are calculated for these drill holes. Within The Narrows area, temperature versus depth data show reversals at different depth in different drill holes. In the main thermal area, temperatures in intermediate-depth drill holes vary approximately linearly but with very high values of temperature gradient. Temperature gradients on a map of the area can be reasonable divided into a large area of regional gradients and smaller areas defining the thermal anomalies.

Idaho↗
USGS2013

Integrated geophysical imaging of a concealed mineral deposit: a case study of the world-class Pebble porphyry deposit in southwestern Alaska

We combined aeromagnetic, induced polarization, magnetotelluric, and gravity surveys as well as drillhole geologic, alteration, magnetic susceptibility, and density data for exploration and characterization of the Cu-Au-Mo Pebble porphyry deposit. This undeveloped deposit is almost completely concealed by postmineralization sedimentary and volcanic rocks, presenting an exploration challenge. Individual geophysical methods primarily assist regional characterization. Positive chargeability and conductivity anomalies are observed over a broad region surrounding the deposit, likely representing sulfide minerals that accumulated during multiple stages of hydrothermal alteration. The mineralized area occupies only a small part of the chargeability anomaly because sulfide precipitation was not unique to the deposit, and mafic rocks also exhibit strong chargeability. Conductivity anomalies similarly reflect widespread sulfides as well as water-saturated glacial sediments. Mineralogical and magnetic susceptibility data indicate magnetite destruction primarily within the Cu-Au-Mo mineralized area. The magnetic field does not show a corresponding anomaly low but the analytic signal does in areas where the deposit is not covered by postmineralization igneous rocks. The analytic signal shows similar lows over sedimentary rocks outside of the mineralized area, however, and cannot uniquely distinguish the deposit. We find that the intersection of positive chargeability anomalies with analytic signal lows, indicating elevated sulfide concentrations but low magnetite at shallow depths, roughly delineates the deposit where it is covered only by glacial sediments. Neither chargeability highs nor analytic signal lows are present where the deposit is covered by several hundred meters of sedimentary and volcanic rocks, but a 3D resistivity model derived from magnetotelluric data shows a corresponding zone of higher conductivity. Gravity data highlight geologic features within the deposit, including shallow diorite sills that locally contain higher-grade mineralization. The results thus show ways in which an integrated survey approach might be used to distinguish zones of potentially economic mineralization.

Alaska↗
USGS2020

Use of time domain electromagnetic soundings and borehole electromagnetic induction logs to delineate the freshwater/saltwater interface on southwestern Long Island, New York, 2015–17

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, used surface and borehole geophysical methods to delineate the freshwater/saltwater interface in coastal plain aquifers along the southwestern part of Long Island, New York. Over pumping of groundwater in the early 20th century combined with freshwater/saltwater interfaces at the coastline created saltwater intrusion in the upper glacial, Jameco, Magothy, and Lloyd aquifers. This study documents, for the first time, extensive saltwater intrusion of the Lloyd aquifer along the southwestern coast of Long Island, N.Y. Several public-supply wells in the southern parts of Nassau, Queens, and Kings Counties have been adversely affected by saltwater intrusion causing supply wells to be shutdown and abandoned. Due to the ongoing groundwater pumping in southern Nassau County, the freshwater/saltwater interface requires delineation and monitoring for any inland movement. In 2015–17, the U.S. Geological Survey collected time domain electromagnetic soundings at 12 locations and borehole electromagnetic induction conductivity logs at 9 wells within the study area to delineate several saltwater intrusion wedges. The upper glacial, Jameco, and Magothy aquifers were grouped into one aquifer complex within the study area to simplify interpretations. The coastal plain sediments increase in thickness from west to east and north to south because of their regional dip toward the southeast. Three separate wedges, shallow, intermediate, and deep, of saltwater intrusion were delineated in the upper glacial, Jameco, and Magothy aquifer complex. In addition, analysis of geophysical logs collected in an open borehole of a test well in southern Queens County in 1989 revealed the Lloyd aquifer was nearly completely intruded by saltwater with an estimated chloride concentration of 15,000 milligrams per liter. The geophysical logs from this well provides, for the first time, definitive proof of saltwater intrusion of the Lloyd aquifer on Long Island’s south shore, suggesting the freshwater/saltwater interface was at the coastline and not miles offshore as theorized by previous studies.

New York↗