USGS Science⌕ Search

SEARCH · USGS Science

Results for “Coal Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
USGS1995

Paleogeography and the Late Cretaceous of the Western Interior of middle North America; coal distribution and sediment accumulation

A synthesis of Late Cretaceous paleogeography of the Western Interior from Mexico to southwestern Canada emphasizes the areal distribution of peat-forming environments during six biostratigraphically constrained time intervals. Isopach maps of strata for each interval reveal the locations and magnitude of major depocenters. The paleogeographic framework provides insight into the relative importance of tectonism, eustasy, and climate on the accumulation of thick peats and their preservation as coals. A total of 123 basin summaries and their data provide the ground truth for construction of the isopach and paleogeographic maps.

Professional Paper↗
USGS1982

Obtaining maps and data from the U.S. Geological Survey

The U.S. Geological Survey produces a variety of resource information for the United States. This includes many data bases of particular interest to planners such as land use and terrain information prepared by the National Mapping Division, water quantity and quality data collected by Water Resources Division, and coal resource information gathered by the Geologic Division. These data are stored in various forms, and information on their availability can be obtained from appropriate offices in the U.S. Geological Survey as well as from USGS Circular 777. These data have been used for the management, development, and monitoring of our Nation's resources by Federal, State, and local agencies.

Computers, Environment and Urban Systems↗
USGS1980

Chemical analyses of coal and coal-associated shale samples from the lower part of the Fort Union Formation, Little Snake River coal field, Sweetwater and Carbon counties, Wyoming

As part of a continuing program by the U.S. Geological Survey to collect and analyze representative samples of U.S. coals, 26 coal and 5 coal-associated shale samples were collected from 13 core and rotary-drill holes in the lower part of the Paleocene Fort Union Formation in the Little Snake River coal field, Sweetwater and Carbon Counties, Wyoming (fig. 1). The samples are briefly described in table 1. Twenty-six of the samples were collected from eight core holes that were drilled in connection with the Red Rim EMRIA (Energy Mineral Rehabilitation Inventory and Analyses) study (U.S. Department of the Interior, 1976). The locations of these eight holes and five other drill holes are shown in figure 2. Detailed geologic mapping of part of the sample collection area was done by Sanders (1974) in his work on the Riner quadrangle. Seven of the core holes (index map locations 1-7) are located in this quadrangle. In his discussion, Sanders (1974) describes the coal beds in the lower part of the Fort Union Formation as being thin, discontinuous, and generally lenticular. Few beds attain a thickness of more than five feet. In the Riner quadrangle coal beds in the lower part of the Fort Union Formation dip 12° to 24° northwestward.

Wyoming↗
USGS2017

Geologic sources of energy

This chapter describes the exploration, development, and geologic setting of petroleum resources (including tar sands), coal resources (including coalbed methane), and geothermal energy resources of the Northern Cordillera.For petroleum resources, the chapter describes: (1) the history of petroleum development and production, first for Alaska and then for the Canadian Cordillera; and (2) generalized basin analysis geologic settings for the six major petroleum basins that are illustrated in summary maps and cross sections. Subsequent sections of the chapter describe the nature and geologic setting of tar sand resources, geothermal energy resources, and coal resources. The area distribution of the energy resources of the region are depicted in the Energy Resources Map that has multiple layers that can be displayed in various arrangements. Employing this map in a separate window while reading the text will be greatly beneficial. Many geographic names are employed in the descriptions throughout this chapter. While reading this chapter, viewing the Geographic Regions Layer of the Energy Resources Map, as needed, will be valuable.

Book chapter↗
USGS2003

Isopach Map and Regional Correlations of the Fire Clay Tonstein, Central Appalachian Basin

A tonstein that occurs within the Middle Pennsylvanian Fire Clay coal zone is a widespread marker bed that has been used for correlation purposes since the early 1900?s. Seiders (1965) first demonstrated that this tonstein is an altered volcanic air-fall ash deposit. Lyons and others (1992) have correlated the tonstein across Kentucky, West Virginia, Virginia, and Tennessee on the basis of mineralogical and geochemical ?fingerprinting?. The correlation of the tonstein, herein often referred to as the Fire Clay tonstein over this four-state area, and the abundance of thickness data on this tonstein permit construction of an isopach map that depicts its distribution. In general, the tonstein thins from Tennessee, where it is up to 12 inches (30 cm) thick, northeastward to central West Virginia, where it is less than 4 in. (10 cm) thick, and its preserved area is about 14,300 sq. mi. (37,000 sq. km). The preserved volume is 0.90 cu. mi or 3.7 cu. km. The compaction ratio of ash to rock is 6:1, so the original ash volume deposited in this area was 5.4 cubic miles (22.2 cubic kilometers). The trends in thickness suggest the source of the ash was a volcano in the Yucatan tectonic plate, which, had it not moved relative to the North American Plate since the Pennsylvanian, would be located in the present Gulf of Mexico, south of Louisiana. The thickness and extent of the tonstein appears to have been controlled partly by winds and partly by the surface on which it landed. Its absence in some areas indicates that the ash was not preserved, probably because it floated downstream as pumice.

Open-File Report↗
USGS1983

Hydrology of area 54, northern Great Plains, and Rocky Mountain coal provinces, Colorado and Wyoming

A nationwide need for information characterizing hydrologic conditions in mined and potential mine areas has become paramount with the enactment of the Surface Mining Control and Reclamation Act of 1977. This report, one in a series covering the coal provinces nationwide, presents information thematically by describing single hydrologic topics through the use of brief texts and accompanying maps, graphs, or other illustrations. The summation of the topical discussions provides a description of the hydrology of the area. Area 54, in north-central Colorado and south-central Wyoming, is 1 of 20 hydrologic reporting areas of the Northern Great Plains and Rocky Mountain coal provinces. Part of the Southern Rocky Mountains and Wyoming Basin physiographic provinces, the 8,380-square-mile area is one of contrasting geology, topography, and climate. This results in contrasting hydrologic characteristics. The major streams, the North Platte, Laramie, and Medicine Bow Rivers, and their principal tributaries, all head in granitic mountains and flow into and through sedimentary basins between the mountain ranges. Relief averages 2,000 to 3,000 feet. Precipitation in the mountains may exceed 40 inches annually, much of it during the winter, which produces deep snowpacks. Snowmelt in spring and summer provides most streamflow. Precipitation in the basins averages 10 to 16 inches annually, insufficient for sustained streamflow; thus, streams originating in the basins are ephemeral. Streamflow quality is best in the mountains where dissolved-solids concentrations generally are least. These concentrations increase as streams flow through sedimentary basins. The increases are mainly natural, but some may be due to irrigation in and adjacent to the flood plains. In the North Platte River, dissolved-solids concentrations are usually less than 300 milligrams per liter; in the Laramie and the Medicine Bow Rivers, the concentrations may average 500 to 850 milligrams per liter. However, water-quality stations on the Laramie and the Medicine Bow Rivers are farther removed from the mountain sources than the stations in the North Platte drainage. Because of the semiarid climate of the basins, soils are not adequately leached. Consequently, flow in ephemeral streams usually has a larger concentration of dissolved solids than that in perennial streams, averaging 1,000 to 1,600 milligrams per liter. Aquifers containing usable ground water are combined into three groups: (1) consolidated and unconsolidated non-coal-bearing Quaternary and Upper Tertiary deposits, (2) Mesozoic and Paleozoic sedimentary rocks, and (3) Lower Tertiary and Upper Cretaceous sedimentary rocks containing coal. These aquifers are used for municipal, domestic, irrigation, and stock supplies. Well yields range from about 5 to 1,000 gallons per minute, and depend on type of aquifer, saturated thickness, and degree of fracturing. The best quality ground water usually comes from the non-coal-bearing Quaternary and Upper Tertiary rocks or the Mesozoic and Paleozoic rocks; often it is dominated by calcium and bicarbonate ions. The coal-bearing formations have a large variability in water chemistry; dominant ions may be bicarbonate or sulfate and sodium, calcium, or magnesium. Dissolved-solids concentrations are generally larger than in the former two groups. The U.S. Geological Survey operates a network of hydrologic stations to observe the streamflow and groundwater conditions. This network currently includes 31 surface-water stations and 35 observation wells; information is available for many other sites observed in the past. Data available include rate of flow, water levels, and water quality; much of the data are available in published reports or from computer storage through the National Water Data Exchange (NAWDEX) or the National Water Data Storage and Retrieval System (WATSTORE). Five formations of Late Cretaceous and early Tertiary age contain coal.

Colorado, Wyoming↗
USGS1988

Origin and influence of coal mine drainage on streams of the United States

Degradation of water quality related to oxidation of iron disulfide minerals associated with coal is a naturally occurring process that has been observed since the late seventeenth century, many years before commencement of commercial coal mining in the United States. Disturbing coal strata during mining operations accelerates this natural deterioration of water quality by exposing greater surface areas of reactive minerals to the weathering effects of the atmosphere, hydrosphere, and biosphere. Degraded water quality in the temperate eastern half of the United States is readily detected because of the low mineralization of natural water. Maps are presented showing areas in the eastern United States where concentrations of chemical constituents in water affected by coal mining (pH, dissolved sulfate, total iron, total manganese) exceed background values and indicate effects of coal mining. Areas in the East most affected by mine drainage are in western Pennsylvania, southern Ohio, western Maryland, West Virginia, southern Illinois, western Kentucky, northern Missouri, and southern Iowa. Effects of coal mining on water quality in the more arid western half of the United States are more difficult to detect because of the high degree of mineralization of natural water. Normal background concentrations of constituents are not useful in evaluating effects of coal mine drainage on streams in the more arid West. Three approaches to reduce the effects of coal mining on water quality are: (1) exclusion of oxygenated water from reactive minerals, (2) neutralization of the acid produced, (3) retardation of acid-producing bacteria population in spoil material, by application of detergents that do not produce byproducts requiring disposal. These approaches can be used to help prevent further degradation of water quality in streams by future mining. ?? 1988 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS2026

Production of mineral commodities and geospatial map of the mineral industries and related infrastructure of China

As part of the U.S. Geological Survey’s (USGS) mission to distribute global mineral information and analyze supply chains, this study provides a comprehensive review of the global significance of China’s mineral production and capacity in 2023. Of 77 mineral commodities in the USGS dataset, China produced 74 and was the world’s first-ranked producer for 39 of the 74. Compared to the high share of global mineral production, including up to 98 percent of global gallium production, the country’s share of global mineral reserves was relatively small, ranging from 20 percent (zinc ore) to 52 percent (tungsten ore). China’s imports of metal ores, slag, and ash accounted for 64 percent of global imports of such commodities by value. The country’s exports of base metals and articles of base metal accounted for 17 percent of the global exports. To help nongeographic information system users assess the spatial distribution of mineral mines, processing facilities, and ports for trades in China, this study created a geospatial (also called “georeferenced”) portable document format (GeoPDF) map. In addition, the GeoPDF contains mineral resource tracts (such as antimony, copper, potash, coal, and oil and gas), exploration sites, and energy infrastructure based on the preexisting USGS data.

Open-File Report↗
USGS1999

1999 Resource assessment of selected Tertiary coal beds and zones in the northern Rocky Mountains and Great Plains region

The USGS has assessed resources of selected coal of the Fort Union Formation and equivalent units in the Northern Rocky Mountains and Great Plains region. The assessment focused on coal in the Powder River, Williston, Hanna-Carbon, and Greater Green River basins most likely to be utilized in the next few decades. In other basins in the region Tertiary coal resources are summarized but not assessed. Disc 1, in PDF files, includes results of the assessment and chapters on coal geology, quantity and quality, and land use and ownership. Disc 2 provides GIS files for land use and ownership maps and geologic maps, and basic GIS data for the assessed basins. ArcView shapefiles, PDF files for cross sections and TIFF files are included along with ArcView Datapublisher software for Windows-based computer systems.

Colorado, Montana, Wyoming↗
USGS2014

Thermal maturity patterns in Pennsylvanian coal-bearing rocks in Alabama, Tennessee, Kentucky, Virginia, West Virginia, Ohio, Maryland, and Pennsylvania

Thermal maturation patterns of Pennsylvanian strata in the Appalachian basin and part of the Black Warrior basin were determined by compiling previously published and unpublished percent-vitrinite-reflectance (%R 0 ) measurements and preparing isograd maps on the basis of the measurements. The isograd values range from 0.6 %R 0 in Ohio and the western side of the Eastern Kentucky coal field to 5.5 %R 0 in the Southern field in the Pennsylvania Anthracite region, Schuylkill County, Pa. The vitrinite-reflectance values correspond to the American Society of Testing Materials (ASTM) coal-rank classes of high-volatile C bituminous to meta-anthracite, respectively. In general, the isograds show that thermal maturity patterns of Pennsylvanian coals within the Appalachian basin generally decrease from east to west. In the Black Warrior basin of Alabama, the isograds show a circular pattern with the highest values (greater than 1.6 %R 0 ) centered in Jefferson County, Ala. Most of the observed patterns can be explained by variations in the depth of burial, variations in geothermal gradient, or a combination of both; however, there are at least four areas of higher ranking coal in the Appalachian basin that are difficult to explain by these two processes alone: (1) a set of west- to northwest-trending salients centered in Somerset, Cambria, and Fayette Counties, Pa.; (2) an elliptically shaped, northeast-trending area centered in southern West Virginia and western Virginia; (3) the Pennsylvania Anthracite region in eastern Pennsylvania; and (4) the eastern part of the Black Warrior coal field in Alabama. The areas of high-ranking coal in southwestern Pennsylvania, the Black Warrior coal field, and the Pennsylvania Anthracite region are interpreted here to represent areas of higher paleo-heat flow related to syntectonic movement of hot fluids towards the foreland associated with Alleghanian deformation. In addition to the higher heat flow from these fluids, the Pennsylvania Anthracite region also was buried more deeply than other parts of the Appalachian basin. The area of high rank coal in southwestern Virginia probably was controlled primarily by overburden thickness, but may also have been influenced by higher geothermal gradients.

Appalacian basin↗
USGS2014

Executive summary

Fossil fuels from the Appalachian basin region have been major contributors to the Nation’s energy needs over much of the last three centuries. Early records indicate that Appalachian coal was first mined in the middle 1700s (Virginia and Pennsylvania) and was used sparingly to fuel colonial settlements and, later, a fledgling industrial-based economy along the eastern seaboard of the United States (de Witt and Milici, 1989). In 2011, central Appalachian basin coal production accounted for approximately 77 percent of all U.S. metallurgical (or coking) coal and 29 percent of total U.S. production (U.S. Energy Information Administration, 2013). Following initial discoveries and commercial use in western New York (1821) and Ohio and West Virginia (mid-1830s), the Appalachian petroleum (oil and gas) industry began in earnest in 1859 with the discovery of oil at the Drake well in northwestern Pennsylvania. Between 1860 and 1989, the Appalachian basin produced more than 2.5 billion barrels of oil (BBO) and more than 30 trillion cubic feet of gas (TCFG) from more than 500,000 wells (de Witt and Milici, 1989). Although both oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to the Nation’s energy needs. For example, the U.S. Energy Information Administration (2010) estimated that there are 6,484 million short tons of recoverable coal reserves in the Appalachian basin. Similarly, about 14.7 billion barrels of oil equivalent (BBOE) (1.2 BBO+81 TCFG [or 13.5 BBOE]) of recoverable Appalachian basin oil and gas remain available of an estimated ultimate endowment of approximately 25.5 billion BBOE (cumulative production + reserves + estimated recoverable undiscovered resources) (this volume, chap. C.1). U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. Several of the chapters have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters cover large segments of the basin and a wide range of stratigraphic intervals. As the title implies, this volume addresses topics that refer to the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results and documentation of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available as downloadable geographic information system (GIS) data files (such as selected coal beds, selected oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology). Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs also are included. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources such as those by Arndt and others (1968) and the numerous contributors to USGS Miscellaneous Map Series I−917 (for example, Harris and others, 1978), respectively. USGS Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the wide variety of topics, papers, and digital images of value for landuse and policy planning issues. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian Basin↗
USGS2013

Time-lapse analysis of methane quantity in Mary Lee group of coal seams using filter-based multiple-point geostatistical simulation

Coal seam degasification and its success are important for controlling methane, and thus for the health and safety of coal miners. During the course of degasification, properties of coal seams change. Thus, the changes in coal reservoir conditions and in-place gas content as well as methane emission potential into mines should be evaluated by examining time-dependent changes and the presence of major heterogeneities and geological discontinuities in the field. In this work, time-lapsed reservoir and fluid storage properties of the New Castle coal seam, Mary Lee/Blue Creek seam, and Jagger seam of Black Warrior Basin, Alabama, were determined from gas and water production history matching and production forecasting of vertical degasification wellbores. These properties were combined with isotherm and other important data to compute gas-in-place (GIP) and its change with time at borehole locations. Time-lapsed training images (TIs) of GIP and GIP difference corresponding to each coal and date were generated by using these point-wise data and Voronoi decomposition on the TI grid, which included faults as discontinuities for expansion of Voronoi regions. Filter-based multiple-point geostatistical simulations, which were preferred in this study due to anisotropies and discontinuities in the area, were used to predict time-lapsed GIP distributions within the study area. Performed simulations were used for mapping spatial time-lapsed methane quantities as well as their uncertainties within the study area. The systematic approach presented in this paper is the first time in literature that history matching, TIs of GIPs and filter simulations are used for degasification performance evaluation and for assessing GIP for mining safety. Results from this study showed that using production history matching of coalbed methane wells to determine time-lapsed reservoir data could be used to compute spatial GIP and representative GIP TIs generated through Voronoi decomposition. Furthermore, performing filter simulations using point-wise data and TIs could be used to predict methane quantity in coal seams subjected to degasification. During the course of the study, it was shown that the material balance of gas produced by wellbores and the GIP reductions in coal seams predicted using filter simulations compared very well, showing the success of filter simulations for continuous variables in this case study. Quantitative results from filter simulations of GIP within the studied area briefly showed that GIP was reduced from an initial ∼73 Bcf (median) to ∼46 Bcf (2011), representing a 37 % decrease and varying spatially through degasification. It is forecasted that there will be an additional ∼2 Bcf reduction in methane quantity between 2011 and 2015. This study and presented results showed that the applied methodology and utilized techniques can be used to map GIP and its change within coal seams after degasification, which can further be used for ventilation design for methane control in coal mines.

Alabama↗
USGS1998

Land status and federal mineral ownership in the Powder River basin, Wyoming and Montana; a digital data set for geographic information systems

As the Nation's energy resources continue to be examined for development, it is critical that a digital database exist that contains location data for all Federal land and mineral resources. The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management (BLM), is collecting these ownership files and compiling them in Environmental Systems Research Institute, Inc. (ESRI) ARC/INFO coverages, to form a standardized data library. A coverage is a digital version of a map in the form of vector data storage. These coverages are combined with models of coal deposits from the USGS National Coal Resource Assessment project, a five-year effort to identify and characterize the coal beds and coal zones that will provide fuel for the Nation’s energy needs during the first quarter of the twenty-first century. Geographic and geologic data layers are integrated in a Geographic Information System (GIS) to answer complex geo-spatial questions concerning coal resource occurrence.

Montana, Wyoming↗
USGS1987

Hydrology of area 46, Northern Great Plains and Rocky Mountain coal provinces, North Dakota

This report is one of a series that describes the hydrology of coal provinces nationwide. The Northern Great Plains and Rocky Mountain Coal Provinces are divided into 20 separate reporting areas which are numbered 43 to 62. This report provides general hydrologic information for Area 46 using a brief text with accompanying maps, charts, or graphs. This information may be used to describe the hydrology of the general area of any existing or proposed mine. Some of the more obvious hydrologic problems of coal development that will need to be addressed before development are disruption of aquifers and potential contamination of streams, aquifers, and the atmosphere. Area 46 is in northwestern North Dakota and is composed of parts or all of 14 hydrologic units based on surface-water drainage basins. The area is drained by the Missouri and Souris Rivers. Lignite-bearing rocks of late Paleocene age underlie nearly all of Area 46. The thickest and most continuous lignite beds occur in the Sentinel Butte and Tongue River Members of the Fort Union Formation. Alluvial deposits and a veneer of glacial drift of late Pleistocene age overlie the lignite-bearing rocks. The climate of the area is semiarid. Mean annual precipitation ranges from 13.9 to 17.8 inches. Mean annual temperatures range from 37.7°F at Bowbells to 40.9°F at Williston. Mean monthly temperatures at Williston range from 8.3°F to 70°F. The growing season is about 125 days. A fairly comprehensive data base for streamflow and water quality in streams is available for Area 46. Many of the small-stream monitoring sites have been operated during the last few years to provide a data base before coal development. With the exception of the Missouri River, which is controlled by several dams, both the quantity and quality of water varies greatly in all streams. A ground-water observation network for water levels and water quality has been established through county ground-water resource investigations and other ground-water studies and provides an adequate data base. Three activities within the U.S. Geological Survey identify and provide access to hydrologic data. These are the National Water-Data Exchange (NAWDEX), the National Water-Data Storage and Retrieval System (WATSTORE), and the Office of Water-Data Coordination (OWDC).

Open-File Report↗
USGS2022

Sediment sources and sealed-pavement area drive polycyclic aromatic hydrocarbon and metal occurrence in urban streams

Metals and polycyclic aromatic hydrocarbons (PAHs) are common pollutants in urban streambed sediment, yet their occurrence is highly variable and difficult to predict. To investigate sources of PAHs and metals to streambed sediment, we sampled pavement dust, soil, and streambed sediment in 10 urban watersheds in three regions of the United States and applied a fallout-radionuclide-based sediment-source analysis to quantify the pavement dust contribution to stream sediment (%dust). We also mapped the area of sealcoated pavement in each watershed (%sealed) to investigate the role of coal-tar pavement sealant (CTS) as a PAH source. Median total and carbon-normalized total PAH concentrations were significantly higher in streambed sediment in the Northeast (54.3 mg/kg and 2.71 mg/gOC) and Southeast (5.37 mg/kg and 1.36 mg/gOC), where CTS is commonly used, than in the Northwest (2.11 mg/kg and 0.071 mg/gOC), where CTS is rarely used. Generalized additive models indicated that %sealed and in some cases %dust significantly affected total PAH concentrations in streambed sediments. The %dust was a significant variable for common urban metals: Cu, Pb, and Zn. These findings advance our quantitative understanding of the role of pavement dust as a source and a vector of contaminants to urban streams.

Georgia, New York, North Carolina, Oregon, Virgini↗