USGS Science⌕ Search

SEARCH · USGS Science

Results for “Agricultural and Forest Meteorology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,658 records · Page 40Linked to original sources
USGS1976

Ground magnetic and VLF studies at Midnite uranium mine, Stevens County, Washington

Ground magnetic and E-mode VLF measurements were made at more than 200 stations at the Midnite uranium Mine, Stevens County, Washington. The equipment was found to be light and foolproof, and each set of data was collected in one day, exclusive of surveying and marking the station points. The maps of contoured magnetic and VLF data resembled geologic maps of the area, showing many common features, as well as a few unique features on each map. Each showed some evidence of a small normal fault cutting the region; taken together, the evidence for this fault was judged to be much stronger, so that further structural details were inferred. Because of soil cover and inadequate outcrops, the presence of this fault had hitherto been unsuspected. A target area for further uranium mineralization north of the fault was indicated by this quick, inexpensive geophysical survey. The drilling program which Midnite Mine management had underway at that time had already outlined a mineralized zone in the indicated area.

Washington↗
USGS2023

Preliminary geologic map of the Southern Santa Rosa Mountains and Borrego Badlands, San Diego County, Southern California

This investigation delineates the geologic framework of an area of 75 square kilometers (km 2 ) located west of the Salton Sea in southern California (fig. 1, on sheet 1). The study area encompasses the south flank of the Santa Rosa Mountains and the eastern part of the Borrego Badlands (sheet 1). In this study area, regionally important stratigraphic and structural elements collectively inform the late Cenozoic geologic evolution of the Anza-Borrego sector of the Salton Trough province. Critical stratigraphic and structural elements in the map area include the following: The well exposed sequence of late Cenozoic, nonmarine sedimentary rocks that filled the Anza-Borrego subbasin (fig. 1) of the Salton Trough; A tectonic boundary that—in the southern Santa Rosa Mountains—separates the sedimentary strata from underlying crystalline rocks of Peninsular Ranges type. This tectonic boundary, named the West Salton Detachment Fault System by Axen and Fletcher (1998), is projected to underlie all late Cenozoic sedimentary strata in the Anza-Borrego subbasin of the Salton Trough; A variety of transpressional, transtensional, and strike-slip structures that have deformed the late Cenozoic sedimentary strata and collectively guided syntectonic and posttectonic depositional events within the Anza-Borrego subbasin of the Salton Trough; and The southeasternmost surface expression of the Clark Fault, a major strand of the dextral San Jacinto Fault Zone. Geologic mapping and analysis for this investigation focused on clarifying geologic relations among these four stratigraphic and structural aspects in the map area.

California↗
USGS2026

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado↗
USGS2025

Seismic moment and local magnitude scales in Ridgecrest, CA from the SCEC/USGS Community Stress Drop Validation Study

We illustrate the systematic difference between moment magnitude and local magnitude caused by underlying earthquake source physics, using seismic moments submitted to the Statewide California Earthquake Center/United States Geological Survey Community Stress Drop Validation Study 2019 Ridgecrest data set. While the relationship between seismic moment and moment magnitude ( M or M w ) of log 10 ( M 0 ) ~ 1.5* M is uniformly valid for all earthquake sizes by definition (Hanks and Kanamori, 1979), the relationship between local magnitude M L and moment is itself magnitude dependent. For moderate events, ~3< M < ~6, M and M L are coincident; for earthquakes smaller than ~3, M L ~ 1.0 log 10 M 0 (Hanks and Boore, 1984). This is a physical consequence of the corner frequency fc becoming larger than the upper frequency of observation and implies that M L and M differ systematically by a factor of 1.5 for these small events. While this idea is not new, we propose a new, continuous relationship between local magnitude and moment, for magnitudes 2 to 6 which extrapolates to smaller and larger magnitudes, applicable to southern California specific to the Ridgecrest region. We make use of the plethora of seismic moments as submitted by many participants of the Community Stress Drop study, compared to the Southern California Seismic Network (SCSN) catalog magnitudes. Overall, the seismic moments in the Community Study recover moment magnitude well, so we use our new M L - M 0 to convert M L to M , refining the SCSN operational M Lr scale. This systematic difference of 50% in slope between local and moment magnitude at small magnitudes has implications for spectral stress drop estimates, earthquake ground motion modeling, as well as other magnitude scales and earthquake occurrence statistics.

California↗
USGS2026

Patterns and drivers of cliff erosion in Big Sur, California, USA using repeat photogrammetry, 2017–2023

Seacliff erosion in steep terrain poses major risks to transportation and critical infrastructure. In Big Sur, California, USA, seacliff erosion threatens the sustainability of the central coast stretch of California State Route 1, a transportation corridor that is critical to the region's economy. Published cliff retreat rates for the region range from 1 to 40 cm yr −1 , highlighting that high-resolution, process-based studies could enhance understanding of the causes of spatial and temporal variability. We quantified cliff erosion and investigated its drivers along ∼13 km of the Big Sur coastline at week–month timescales during the late fall to early spring wet seasons between January 2017 and June 2023 by analyzing 3D point clouds developed from aerial imagery using four-dimensional structure-from-motion (4D SfM) photogrammetry techniques. We calculated cliff face retreat rates of 2.23 ± 3.06 cm yr −1 (mean ±1 σ ), an order of magnitude lower than long-term estimated rates for the region (which included large deep-seated landslides), but in line with short-term rates reported across California. Change detection imagery comparison, cliff profiles through time, and statistical analysis reveal a cyclical cliff evolution process in which erosion by wave action at the cliff base destabilizes the cliff and primes it for subsequent failure during precipitation events. Although more erosion by volume could be attributed to precipitation-induced increases in soil moisture (784 m 3 km −1 yr −1 ) compared with erosion attributed to wave power (282 m 3 km −1 yr −1 ), our observations underscore the coupled nature of these processes in driving cliff evolution, consistent with established theory and observations.

California↗
USGS2026

Ground-motion aleatory-variability models for Puerto Rico and the U.S. Virgin Islands

I develop independent logic trees for aleatory variability for crustal and subduction-zone (interface and intraslab) earthquakes for seismic hazards analyses in Puerto Rico and the U.S. Virgin Islands (PRVI) from existing suites of ground-motion models (GMMs) and from ground-motion datasets, including a regional PRVI dataset. The aleatory variability models are parameterized using a partially nonergodic partitioning of standard deviation that consists of independently developed between-event ( ), site-to-site ( ), and event-corrected single-station ( ) standard deviation components. The effects of nonlinear site response on aleatory variability are incorporated through additional terms that modify the standard deviation components. Because one goal of this work is to develop independent logic trees for aleatory variability that synthesize the aleatory variability models from GMMs, I make use of the functional forms of the input GMMs. The PRVI dataset contains a limited number of stations with high-quality site metadata and does not contain records from earthquakes with magnitudes greater than 6.1, so I choose not to develop the aleatory variability models from the regional dataset alone. Instead, the standard deviation components from regional ground-motion data are evaluated against the components derived from GMMs and from available global datasets, and regionalized standard deviation components are incorporated where there is evidence that regional effects exhibit substantial differences. The resulting logic trees for aleatory variability consist of models of and that are consistent with semiempirical GMMs for active crustal and subduction-zone regimes, and two alternative models of , including one model that exhibits site-to-site variability informed by PRVI data, with values that exceed global models. The aleatory variability models may be considered in future hazards assessments in PRVI to simplify the hazard calculations, to incorporate regional ground-motion variability effects, and to enable direct logic-tree weighs of aleatory variability.

Puerto Rico, U.S. Virgin Islands↗
USGS2024

The 3D Elevation Program—Supporting New Hampshire’s economy

Introduction The topography of New Hampshire ranges from the Coastal Lowlands to the Eastern New England Upland to the White Mountains region. High-quality statewide elevation data are useful in managing this very diverse landscape. For example, the short coastline, including the Great Bay estuary and the Hampton-Seabrook marshes, is of disproportionately high value to New Hampshire’s tourist economy. The vulnerability of the coast to the effects of sea-level rise underscores the need for accurate, high-quality nearshore topographic elevation data and offshore bathymetric data to effectively manage the coast’s valuable resources, which include important fisheries, habitat, and infrastructure. Another important use for accurate elevation data in New Hampshire is in the evaluation of flood hazards and their potential environmental and infrastructure effects. This evaluation includes mapping of inundation and sediment transport, and assessing the associated costs of flooding. Addressing this challenge requires detailed knowledge of both surface topography and inland bathymetry. Other important activities having a substantial economic element and needing accurate elevation data include geologic resource assessment and hazard mitigation, urban and regional planning, infrastructure and construction management, and cultural resources preservation and management. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional model of the Earth’s surface and aboveground features.

New Hampshire↗
USGS2024

Federal lands greenhouse gas emissions and sequestration in the United States: Estimates for 2005–22

In 2016, the Secretary of the U.S. Department of the Interior requested that the U.S. Geological Survey (USGS) produce a publicly available and annually updated database of estimated greenhouse gas emissions associated with the extraction and use of fossil fuels from Federal lands. The first report in this series included emissions estimates from 2005 to 2014 and were reported for 29 States and two offshore areas. Native American and Tribal lands were not included in that analysis. This report recalculates those previous years (2005–14) with updated data and methods and extends the estimates to 2022. Nationwide emissions from fossil fuels produced on Federal lands in 2022 were 1,081.2 million metric tons of carbon dioxide equivalent (MMT CO 2 Eq.) for CO 2 , 33.4 MMT CO 2 Eq. for methane (CH 4 ), and 4.3 MMT CO 2 Eq. for nitrous oxide (N 2 O). Compared to 2005, the 2022 totals represent decreases in emissions for all three greenhouse gases (by 17 percent for CO 2 , 37 percent for CH 4 , and 30 percent for N 2 O). Emissions from fossil fuels produced on Federal lands represent, on average, 21.8 percent of U.S. emissions for CO 2 , 6.1 percent for CH 4 , and 1.3 percent for N 2 O over the 18 years included in this estimate. The trends and relative magnitudes of the greenhouse gas emissions estimated are roughly parallel to the Federal lands fossil fuel production volumes. In 2021, Federal lands of the conterminous United States stored 70,424 MMT CO 2 Eq. in terrestrial ecosystems. Soils stored most of the terrestrial ecosystem carbon (66 percent), followed by live vegetation (25 percent), deadwood (5 percent), and litter (4 percent). Carbon sequestration on Federal lands was highly variable over time, owing primarily to interannual variability in climate and weather, and variability in land use and land cover (LULC) change and disturbances, among these are wildfires and logging. Between 2005 and 2021, Federal lands sequestered an average of 83 MMT CO 2 Eq./yr. By subtracting the cumulative effects of LULC and disturbance-related CO 2 losses to the atmosphere from the total, we estimate that ecosystems at the national level sequestered CO 2 at an annual mean rate of 17 MMT CO 2 Eq./yr in a term called the net ecosystem exchange (NEE). This annual NEE sequestration value represents about 1.4 percent of average fossil fuel emissions over the same period. The USGS estimates presented in this report represent an accounting for the emissions resulting from fossil fuel extraction on Federal lands and the end-use combustion of those fuels, as well as for the sequestration of carbon in terrestrial ecosystems on Federal lands. A combined net CO 2 emissions estimate, which is the difference between the emitted and sequestered CO 2 from both the fossil fuel and ecosystems estimates, provides context for evaluating the greenhouse gas contributions of activities on these lands. The estimates included in this report can provide context for future energy decisions, as well as a basis to track change in the future.

Scientific Investigations Report↗
USGS2024

Preparing for today's and tomorrow's water-resources challenges in eastern Long Island, New York

Freshwater is a vital natural resource. Although New York is a water-rich State, the wise and economical use of water resources is needed to ensure that there is enough water of adequate quality for both human and ecological needs—both for today and for tomorrow. Nowhere in New York is this more evident than in Nassau and Suffolk Counties on Long Island, where the public water supply is obtained from the sole-source aquifers located directly beneath the nearly 3 million people who live there. In 2023, in eastern Long Island’s Suffolk County, groundwater was pumped from these aquifers by more than 1,100 public water-supply wells to meet the needs of about 1.5 million people.

New York↗
USGS2025

High-precision earthquake catalog for Minto Flats fault zone, central Alaska, reveals complex and conjugate faulting

The Minto Flats fault zone (MFFZ) in central Alaska is a left‐lateral strike‐slip fault system situated between the continental‐scale right‐lateral Denali and Kaltag‐Tintina faults. The MFFZ has the potential to generate magnitude 7 earthquakes, and it hosted a magnitude 6 earthquake in 1995. It has also produced exotic events, such as very‐low‐frequency earthquakes and nucleation signals. We use network‐matched filtering and relative earthquake relocation techniques to derive a detailed catalog of earthquake locations for the MFFZ. The catalog spans from August 2014 to December 2019, a time period including 13 temporary seismic stations in the region. Our results provide the most complete catalog for the MFFZ and include deeper events, clusters of shallow seismicity, and a complex and segmented fault structure not observed in the original regional catalog. We document right‐lateral strike‐slip faulting, conjugate to the main northeast‐striking left‐lateral faults of the MFFZ. Below Nenana basin, the relocated seismicity reveals northwest‐dipping left‐lateral faults, supporting the inference that deep crustal active faulting is associated with recent basin deformation.

Alaska↗
USGS2026

Geothermal district energy systems coupled with seasonal underground thermal energy storage: A U.S. techno-economic screening by climate and geology

In the United States, cooling-dominated commercial building loads can cause geothermal heat pump-based district energy systems to accumulate a long-term subsurface thermal imbalance, motivating the incorporation of seasonal underground thermal energy storage. We developed a transferable workflow to evaluate geothermal district systems that pair ground heat exchangers with seasonal underground thermal energy storage. Using standardized hourly loads for seven commercial buildings and a uniform cost framework, we simulated ten U.S. cities with a physics-based ground heat exchanger model, subsurface storage simulations, and economic assessment to isolate the roles of climate and hydrogeology. In cooling-dominated cities, underground thermal energy storage supplied the majority of annual cooling, cutting electricity use and summer peaks substantially while achieving levelized costs comparable to or below conventional chiller-boiler plants. In cooler climates, the storage share shrunk, required borefield size and costs rose, and levelized cost of energy increased nearly linearly with declining underground thermal energy storage fraction, indicating storage fraction as the primary economic lever. Sensitivity analysis showed capital risk dominated by borefield drilling and surface heating, ventilation, and air-conditioning and piping, with underground thermal energy storage costs secondary. This workflow provides a transparent foundation for site-specific design and screening of next-generation geothermal district energy systems.

Arizona, Illinois, Maryland, Michigan, Mississippi↗
USGS2025

Scientific opportunities in the National Landscape Conservation System

The National Landscape Conservation System consists of unique and beautiful places across America’s landscapes where identified resources and values are protected and science is highlighted. The mission of the National Landscape Conservation System (NLCS), which is managed by the Bureau of Land Management and is often referred to as the agency’s National Conservation Lands, is to conserve, protect, and restore nationally significant landscapes for their cultural, ecological, and scientific values. This clear inclusion of science in the NLCS mission sets the stage for individual units to serve as places of learning, teaching, discovery, and innovation. Science is an integral part of managing the National Conservation Lands, and science conducted within and across the more than 900 units that make up the NLCS can inform and influence conservation and public land management well beyond its boundaries. Here, we highlight seven core aspects of National Conservation Lands that present valuable science opportunities: (1) the scientific values for which individual units are designated; (2) the many other resources, objects, and values within units; (3) the value of units as “control” sites for understanding the effects of activities such as mineral extraction that commonly occur elsewhere on multiple-use public lands but are often prohibited within National Conservation Lands; (4) the value of units for studying the effects of activities such as recreation that regularly occur and may be intensified on National Conservation Lands; (5) the high visibility of units, which draws strong interest and engagement from scientists, partners, and the public; (6) the functioning of the units as a network managed for a common purpose, which provides an opportunity to explore cross-cutting science questions across widely varying contexts and geographies; and (7) the opportunities units provide to promote and apply Indigenous Knowledge to scientific research to manage natural and cultural resources. Because of all of these characteristics, National Conservation Lands can serve as hubs for basic and applied science that can inform management of all public lands and resources into the future. We highlight these science opportunities through examples from existing units and suggest two actions that could help further science activities and impact on National Conservation Lands.

Parks Stewardship Forum↗
USGS2026

Hydrogeologic conceptualization of the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory, Edwards Air Force Base, Antelope Valley, California, 2017–21

Research and testing within the Air Force Research Laboratory at Edwards Air Force Base in the southwestern Mojave Desert has been conducted since the 1950s. This testing requires large quantities of groundwater for cooling and operations involving hazardous constituents that have entered the groundwater. To better understand the potential movement of contaminants through the groundwater system, the U.S. Geological Survey entered into a cooperative agreement with the U.S. Air Force Civil Engineer Center with the purpose of (1) gaining a more detailed understanding of the hydraulic connection between the unconsolidated basin-fill sediment and the underlying weathered and crystalline bedrock and (2) investigating faults and their potential effect on groundwater flow. This study was specific to the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory. The refined hydrogeologic characterization was derived by evaluating surface geologic maps, a regional gravity model, new subsurface geophysical surveys, lithology data from boreholes, and groundwater-level data. Refinement of the hydrogeologic characterization of the study area involved developing a map of basin-fill sediment thickness, estimating the geometry and depth to bedrock, determining the presence of weathered bedrock material, and identifying the location of faults and subsurface structures. The thickness of basin-fill sediment was derived from a regional gravity model. Basin-fill sediment ranges from less than 20 feet (ft) thick to about 150 ft thick and increases substantially toward a deep structural basin in the northwestern part of the study area. The top of bedrock estimated from the new surface geophysical surveys is generally deeper than the top of bedrock from the regional gravity model. These differences in interpreted bedrock tops indicate that there may be a zone of weathered bedrock in the subsurface, overlying crystalline bedrock. Additional subsurface data evaluating the geometry and thickness of weathered bedrock are necessary for a comprehensive evaluation of weathered bedrock in the study area. Previously unmapped extensions of the Leuhman Fault, Spring Fault Zone, and Boron Gate Fault were identified in the new surface geophysical surveys. Evaluation of groundwater flow between bedrock and basin-fill sediment, and the effects of faults on groundwater flow, was done using groundwater-level data from 2020. The groundwater table was in crystalline bedrock throughout most of the Arroyos and Northeast Air Force Research Laboratory subareas, with a few exceptions where it was in basin-fill sediment and weathered bedrock. Basin-fill sediment, and likely weathered bedrock, was partially saturated in parts of the study area where basin-fill sediment was as thick as 150 ft. Weathered bedrock material may be present near the Spring Fault Zone, and if so, was likely saturated in 2020. The groundwater-level data near and within Spring Fault Zone indicate that the Spring Fault Zone acts as a vertical-along-strike conduit for, and as an across-strike impediment to, groundwater flow. In addition, steep groundwater-level gradients in the southeastern part of the study area indicate that a subsurface structure affecting groundwater flow could be related to the Leuhman Fault. Sufficient groundwater-level data were not available to conclusively determine if the Arroyos, Rich, and Boron Gate Faults, and their inferred extensions from the geophysical surveys, affect the movement or direction of groundwater flow.

California↗
USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗
USGS2024

Quantitative risk of earthquake disruption to global copper and rhenium supply

Earthquakes have the potential to substantially affect mining operations, potentially leading to supply chain disruptions and adversely affecting the global economy. This study explores the quantification of earthquake risk to copper and rhenium commodity supply by examining the spatial concentration of high earthquake hazard areas and the commodity-specific mining, smelting, and refining operations across the globe. Because many of the largest facilities are concentrated geographically near the highly seismic regions of South America, East Asia, and the Pacific, there is a potential for cascading effects on the entire supply chain. The analysis indicates that the expected annual disruption of global production is 0.3–1.1 percent for copper mines, 1.8–4.0 percent for smelters, and 1.5–3.3 percent for refineries. Expected annual disruption of global rhenium production capacity is 0.32–1.32 percent. The research highlights that the potential lost revenue from earthquake disruptions is from $315 million to $1.29 billion for copper mining, $1.92 billion to $4.33 billion for copper smelting, $2.06 billion to $4.52 billion for copper refining, and $337,000 to $1.40 million for rhenium production capacity.

Open-File Report↗
USGS2025

Tapwater exposures, residential risk, and mitigation in a PFAS-impacted-groundwater community

Tapwater (TW) safety and sustainability are priorities in the United States. Per/polyfluoroalkyl substance(s) (PFAS) contamination is a growing public-health concern due to prolific use, widespread TW exposures, and mounting human-health concerns. Historically-rural, actively-urbanizing communities that rely on surficial-aquifer private wells incur elevated risks of unrecognized TW exposures, including PFAS, due to limited private-well monitoring and contaminant-source proliferation in urbanizing landscapes. Here, a broad-analytical-scope TW-assessment was conducted in a hydrologically-vulnerable, Mississippi River alluvial-island community, where PFAS contamination of the shallow-alluvial drinking-water aquifer has been documented, but more comprehensive contaminant characterization to inform decision-making is currently lacking. In 2021, we analyzed 510 organics, 34 inorganics, and 3 microbial groups in 11 residential and community locations to assess (1) TW risks beyond recognized PFAS issues, (2) day-to-day and year-to-year risk variability, and (3) suitability of the underlying sandstone aquifer as an alternative source to mitigate TW-PFAS exposures. Seventy-six organics and 25 inorganics were detected. Potential human-health risks of detected TW exposures were explored based on cumulative benchmark-based toxicity quotients ( ∑ TQ ). Elevated risks ( ∑ TQ ≥ 1) from organic and inorganic contaminants were observed in all alluvial-aquifer-sourced synoptic samples but not in sandstone-aquifer-sourced samples. Repeated sampling at 3 sites over 52–55 h indicated limited variability in risk over the short-term. Comparable PFAS-specific ∑ TQ for spatial-synoptic, short-term (3 days) temporal, and long-term (3 years quarterly) temporal samples indicated that synoptic results provided useful insight into the risks of TW-PFAS exposures at French Island over the long-term. No PFAS detections in sandstone-aquifer-sourced samples over a 3 year period indicated no PFAS-associated risk and supported the sandstone aquifer as an alternative drinking-water source to mitigate community TW-PFAS exposures. This study illustrated the importance of expanded contaminant monitoring of private-well TW, beyond known concerns (in this case, PFAS), to reduce the risks of a range of unrecognized contaminant exposures.

Wisconsin↗
USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗