USGS Science⌕ Search

SEARCH · USGS Science

Results for “Review Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS1990

Report planning, preparation and review guide

The guide describes critical steps in the planning, preparation, and review of hydrologic projects and reports. Project and report planning and organization are discussed first. Report writing and guidelines for writing selected parts of the report are covered next. The last topics covered are editorial and technical review. The guide contains examples of good and poor writing, report checklists, and source references to assist authors in the various stages of report preparation.

Open-File Report↗
USGS1919

The oil fields of Allen County, Kentucky, with notes on the oil geology of adjoining counties

This report is based on a reconnaissance investigation of the oil field of Allen County, Ky., which was part of a broader study of the oil and gas fields of Kentucky, Tennessee, and Alabama, on which a general report is planned. Most of the field work was done by Mr. Mather, who spent three and a half weeks in and around the county. Mr. Shaw visited Scottsville, the county seat of Allen County, a few years ago and spent a few days in that vicinity at the beginning of the recent field work, which extended from the middle of April to the middle of May, 1917 He prepared also the first draft of the report and reviewed the literature, including reports in oil and gas journals. The purpose of the field work was to investigate the geology of the county, particularly the structure or lay of the oil-bearing strata and the results of drilling to date. Structural conditions in the producing fields were determined by running level lines to the wells and correlating the data recorded in the well logs generously furnished by the operators. Traverses were made of outcrops, and observations of the dip and strike were made in different parts of the county. Lack of a topographic base map and of time and funds for making an accurate topographic survey render the results of the work somewhat incomplete, but it is hoped they will form a valuable contribution to the knowledge of the geology of this relatively little known region, for little detailed geologic work has been done heretofore within 50 miles of Scottsville. The dips are generally too low to be read by the clinometer, but in some localities unmistakable dips can be observed in extensive outcrops along creek banks and can be measured with a level or hand transit. Few of the beds of this region can be followed any considerable distance, though by means of fossils the stratigraphic position of beds outcropping many miles apart can be determined within a few feet. The black shale is the best horizon marker, but it outcrops in only a few places and is reached in only a few wells outside the oil fields. The field work thus consisted largely in observations on out- , cropping beds in different localities and in estimating the altitude of those identified, in collecting fossils for use in future detailed work, and in obtaining from oil operators data concerning the wells and their output. It included the determination of the general lay of the rocks in the county and surrounding territory and details of structure in certain areas. The rocks lie so nearly flat that without topographic data only the general dip could be made out for a large part of the area examined. A complete set of logs of wildcat wells in the region would have thrown much light on the structure and oil possibilities, but little is known of many of the earlier wells drilled in the region, especially of those altogether unsuccessful. An unsuccessful test is soon forgotten, though the data thus obtained concerning the depth at which different beds were found and the yield of porous strata, whether water, oil, or gas, is of great value to the geologist and oil prospector.

Kentucky↗
USGS1996

Review of USGS Open-file Report 95-525 ("Cartographic and digital standard for geologic map information") and plans for development of Federal draft standards for geologic map information

This report summarizes a technical review of USGS Open-File Report 95-525, 'Cartographic and Digital Standard for Geologic Map Information' and OFR 95-526 (diskettes containing digital representations of the standard symbols). If you are considering the purchase or use of those documents, you should read this report first. For some purposes, OFR 95-525 (the printed document) will prove to be an excellent resource. However, technical review identified significant problems with the two documents that will be addressed by various Federal and State committees composed of geologists and cartographers, as noted below. Therefore, the 2-year review period noted in OFR 95-525 is no longer applicable. Until those problems are resolved and formal standards are issued, you may consult the following World-Wide Web (WWW) site which contains information about development of geologic map standards: URL: http://ncgmp.usgs.gov/ngmdbproject/home.html

Open-File Report↗
USGS2014

Conservation buffer distance estimates for Greater Sage-Grouse: a review

This report was prepared at the request of the U.S. Department of the Interior and is a compilation and summary of published scientific studies that evaluate the influence of anthropogenic activities and infrastructure on Greater Sage-Grouse (Centrocercus urophasianus ; hereafter, sage-grouse) populations. The purpose of this report is to provide a convenient reference for land managers and others who are working to develop biologically relevant and socioeconomically practical buffer distances around sage-grouse habitats. The framework for this summary includes (1) addressing the potential effects of anthropogenic land use and disturbances on sage-grouse populations, (2) providing ecologically based interpretations of evidence from the scientific literature, and (3) informing implementation of conservation buffers around sage-grouse communal breeding locations—known as leks. We do not make specific management recommendations but instead provide summarized information, citations, and interpretation of findings available in scientific literature. We also recognize that because of variation in populations, habitats, development patterns, social context, and other factors, for a particular disturbance type, there is no single distance that is an appropriate buffer for all populations and habitats across the sage-grouse range. Thus, we report values for distances upon which protective, conservation buffers might be based, in conjunction with other considerations. We present this information for six categories of land use or disturbance typically found in land-use plans which are representative of the level of definition available in the scientific literature: surface disturbance (multiple causes; immediate and cumulative influences); linear features (roads); energy development (oil, gas, wind, and solar); tall structures (electrical, communication, and meteorological); low structures (fences and buildings); and activities (noise and related disruptions). Minimum and maximum distances for observed effects found in the scientific literature, as well as a distance range for possible conservation buffers based on interpretation of multiple sources, expert knowledge of the authors regarding affected areas, and the distribution of birds around leks are provided for each of the six categories These interpreted values for buffer distances are an attempt to balance the extent of protected areas with multiple land-use requirements using estimates of the distribution of sage-grouse habitat. Conservation efforts may then focus on the overlap between potential effect zone and important habitats. We provide a brief discussion of some of the most relevant literature for each category. References associated with the minimum and maximum values are identified in the References Cited section with corresponding symbols. Distances in this report reflect radii around lek locations because these locations are typically (although not universally) known, and management plans often refer to these locations. Lek sites are most representative of breeding habitats, but their locations are focal points within populations, and as such, protective buffers around lek sites can offer a useful solution for identifying and conserving seasonal habitats required by sage-grouse throughout their life cycle. However, knowledge of local and regional patterns of seasonal habitat use may improve conservation of those important areas, especially regarding the distribution and utilization of nonbreeding season habitats (which may be underrepresented in lek-based designations).

Open-File Report↗
USGS2002

USGS environmental studies of the World Trade Center area, New York City, after September 11, 2001

Two days after the September 11, 2001, attack on World Trade Center (WTC), the U.S. Geological Survey (USGS) was asked by the U.S. Environmental Protection Agency (EPA) and the U.S. Public Health Service to conduct a remote sensing and mineralogical characterization study of lower Manhattan around the WTC. This study, conducted in cooperation with the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL), was requested to rapidly provide emergency response teams with information on the concentrations and distribution of asbestos and other materials in the dusts deposited around lower Manhattan after the September 11 WTC building collapse in New York City. Preliminary results of the study were released via the internet to emergency response teams on September 18 and September 27, 2001. After September 27, additional work was done to fill remaining data gaps, and the study report underwent further detailed peer review. The report was released to the general public via the internet on November 27, 2001. This fact sheet summarizes the results of the interdisciplinary study; the full report can be viewed at http://geology.cr.usgs.gov/pub/open-file-reports/ofr-01-0429/ .

New York↗
USGS1998

Status and trends of the nation's biological resources

This report is a comprehensive summary of the status and trends of our nation’s biological resources. The report describes the major processes and factors affecting biological resources, and it treats regional status and trends. Authors of the chapters and boxes in this two-volume report were drawn from federal and state agencies, universities, and private organizations, reflecting the U.S. Geological Survey’s national partnership approach to providing comprehensive, reliable information about our biological resources. Following scientific tradition, each chapter and box was peer-reviewed by anonymous scientific reviewers.

Report↗
USGS1989

Pentachlorophenol Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review

Pentachlorophenol (PCP) is now widely used as a wood preservative, and this has contributed to the detection of PCP residues in air, rain, groundwaters, surface waters, fish and aquatic invertebrates, and in human urine, blood, and milk of nursing mothers. This report briefly reviews the technical literature on ecological and toxicological aspects of PCP in the environment, with emphasis on fishery and wildlife resources. Subtopics include sources and uses, chemical properties, fate, background concentrations, lethal and sublethal effects, and current recommendations for resource protection

Contaminant Hazard Reviews↗
USGS2003

Atomic weights of the elements. Review 2000 (IUPAC Technical Report)

A consistent set of internationally accepted atomic weights has long been an essential aim of the scientific community because of the relevance of these values to science and technology, as well as to trade and commerce subject to ethical, legal, and international standards. The standard atomic weights of the elements are regularly evaluated, recommended, and published in updated tables by the Commission on Atomic Weights and Isotopic Abundances (CAWIA) of the International Union of Pure and Applied Chemistry (IUPAC). These values are invariably associated with carefully evaluated uncertainties. Atomic weights were originally determined by mass ratio measurements coupled with an understanding of chemical stoichiometry, but are now based almost exclusively on knowledge of the isotopic composition (derived from isotope-abundance ratio measurements) and the atomic masses of the isotopes of the elements. Atomic weights and atomic masses are now scaled to a numerical value of exactly 12 for the mass of the carbon isotope of mass number 12. Technological advances in mass spectrometry and nuclear-reaction energies have enabled atomic masses to be determined with a relative uncertainty of better than 1 ×10−7 . Isotope abundances for an increasing number of elements can be measured to better than 1 ×10−3 . The excellent precision of such measurements led to the discovery that many elements, in different specimens, display significant variations in their isotope-abundance ratios, caused by a variety of natural and industrial physicochemical processes. While such variations increasingly place a constraint on the uncertainties with which some standard atomic weights can be stated, they provide numerous opportunities for investigating a range of important phenomena in physical, chemical, cosmological, biological, and industrial processes. This review reflects the current and increasing interest of science in the measured differences between source-specific and even sample-specific atomic weights. These relative comparisons can often be made with a smaller uncertainty than is achieved in the best calibrated “absolute ” (=SI-traceable) atomic-weight determinations. Accurate determinations of the atomic weights of certain elements also influence the values of fundamental constants such as the Avogadro, Faraday, and universal gas constants. This review is in two parts: the first summarizes the development of the science of atomic-weight determinations during the 20th century; the second summarizes the changes and variations that have been recognized in the values and uncertainties of atomic weights, on an element-by-element basis, in the latter part of the 20th century.

Pure and Applied Chemistry↗
USGS2006

Mapping ground water in three dimensions: An analysis of airborne geophysical surveys of the Upper San Pedro River Basin, Cochise County, southeastern Arizona

This report summarizes the results of two airborne geophysical surveys conducted in the upper San Pedro Valley of southeastern Arizona in 1997 and 1999. The combined surveys cover about 1,000 square kilometers and extend from the Huachuca Mountains on the west to the Mule Mountains and Tombstone Hills on the east and from north of the Babocomari River to near the Mexican border on the south. The surveys included the acquisition of high-resolution magnetic data, which were used to map depth to the crystalline basement rocks underlying the sediments filling the basin. The magnetic inversion results show a complex basement morphology, with sediment thickness in the center of the valley ranging from ~237 meters beneath the city of Sierra Vista to ~1,500 meters beneath Huachuca City and the Palominas area near the Mexican border. The surveys also included acquisition of 60-channel time-domain electromagnetic (EM) data. Extensive quality analyses of these data, including inversion to conductivity vs. depth (conductivity-depth-transform or CDT) profiles and comparisons with electrical well logs, show that the electrical conductor mapped represents the subsurface water-bearing sediments throughout most of the basin. In a few places (notably the mouth of Huachuca Canyon), the reported water table lies above where the electrical conductor places it. These exceptions appear to be due to a combination of outdated water-table information, significant horizontal displacement between the wells and the CDT profiles, and a subtle calibration issue with the CDT algorithm apparent only in areas of highly resistive (very dry) overburden. These occasional disparities appear in less than 5 percent of the surveyed area. Observations show, however, that wells drilled in the thick unsaturated zone along the Huachuca Mountain front eventually intersect water, at which point the water rapidly rises high into the unsaturated zone within the wellbore. This rising of water in a wellbore implies some sort of confinement below the thick unsaturated zone, a confinement that is not identified in the available literature. Occasional disparities notwithstanding, maps of the electrical conductor derived from the airborne EM system provide a synoptic view of the presence of water underlying the upper San Pedro Valley, including its three-dimensional distribution. The EM data even show faults previously only inferred from geologic mapping. The magnetic and electromagnetic data together appear to show the thickness of the sediments, the water in the saturated sediments down to a maximum of about 400 meters depth, and even places where the main ground-water body is not in direct contact with the San Pedro River. However, the geophysical data cannot reveal anything directly about hydraulic conductivity or ground-water flow. Estimating these characteristics requires new hydraulic modeling based in part on this report. One concern to reviewers of this report is the effect that clays may have on the electrical conductor mapped with the airborne geophysical system. Although the water in the basin is unusually conductive, averaging 338 microsiemens per centimeter, reasoning cited below suggests that the contribution of clays to the overall conductivity would be relatively small. Basic principles of sedimentary geology suggest that silts and clays should dominate the center of the basin, while sands and gravels would tend to dominate the margins. Although clay content may increase the amplitude of the observed electrical conductors somewhat, it will not affect the depths to the conductor derived from depth inversions. Further, fine-grained sediments generally have higher porosity and tend to lie toward a basin center, a fact in general agreement with the observed geophysical data.

Arizona↗
USGS2013

AMAP Assessment 2013: Arctic Ocean acidification

This assessment report presents the results of the 2013 AMAP Assessment of Arctic Ocean Acidification (AOA). This is the first such assessment dealing with AOA from an Arctic-wide perspective, and complements several assessments that AMAP has delivered over the past ten years concerning the effects of climate change on Arctic ecosystems and people. The Arctic Monitoring and Assessment Programme (AMAP) is a group working under the Arctic Council. The Arctic Council Ministers have requested AMAP to: - produce integrated assessment reports on the status and trends of the conditions of the Arctic ecosystems; - identify possible causes for the changing conditions; - detect emerging problems, their possible causes, and the potential risk to Arctic ecosystems including indigenous peoples and other Arctic residents; and to - recommend actions required to reduce risks to Arctic ecosystems. This report provides the accessible scientific basis and validation for the statements and recommendations made in the Arctic Ocean Acidification Assessment Summary for Policy-makers that was delivered to Arctic Council Ministers at their meeting in Kiruna, Sweden in May 2011 and the related AMAP State of the Arctic Environment report Arctic Ocean Acidification 2013: An Overview . It includes extensive background data and references to the scientific literature, and details the sources for figures reproduced in the overview report. Whereas the Summary for Policy-makers report contains recommendations that focus mainly on policy-relevant actions concerned with addressing the consequences of AOA, the conclusions and recommendations presented in this report also cover issues of a more scientific nature, such as proposals for filling gaps in knowledge, and recommendations relevant to future monitoring and research work. The AOA assessment was conducted between 2010 and 2013 by an international group of over 60 experts. Lead authors were selected based on an open nomination process coordinated by AMAP. A similar process was used to select international experts who independently reviewed this report. Information contained in this report is fully references and based on first and foremost peer-reviewed and published results of research and monitoring undertaken since 2006. It also incorporates some new (unpublished) information from monitoring and research conducted according to well-established and documented national and international standards of quality assurance/quality control protocols. Care has been taken to ensure that no critical probability statements are based on non-peer-reviewed materials. Access to reliable and up-to-date information is essential for the development of science-based decision-making regarding ongoing changes in the Arctic and their global implications. The AOA assessment summary reports and films have therefore been developed specifically for policy-makers, summarizing the main findings of the AOA assessment. The AOA lead authors have confirmed that both this report and its derivative products accurately and fully reflect their scientific assessment. The AOA reports and the films are freely available from the AMAP Secretariat and on the AMAP website: www.amap.no, and their use for educational purposes is encouraged. AMAP would like to express its appreciation to all experts who have contributed their time, efforts and data, in particular the lead authors who coordinated the production of this report. Thanks are also due to the reviewers who contributed to the AOA peer-review process and provided valuable comments that helped to ensure the quality of the report. A list of the main contributors is included at the start of each chapter. The list is not comprehensive. Specifically, it does not include the many national institutes, laboratories and organizations, and their staff, which have been involved in various countries in AOA-related monitoring and research. Apologies, and no lesser thanks are given to any individuals unintentionally omitted from the list. The support from the Arctic countries and non-Arctic countries implementing research and monitoring in the Arctic is vital to the success of AMAP. The AMAP work is essentially based on ongoing activities within these countries, and the countries that provide the necessary support for most the experts involved in the preparation of the AMAP assessments. In particular, AMAP would like to acknowledge Norway for taking the lead-country role in this assessment and thank Canada, Norway, Sweden, USA and the Nordic Council of Ministers for their financial support to the AOA work. The AMAP Working Group is pleased to present its assessment to the Arctic Council and the international science community. Richard Bellerby (AOA assessment Chair) Russel Shearer (AMAP Chair) Lars-Otto Reiersen (AMAP Executive Secretary) Oslo, May 2013

Report↗
USGS2003

Historical and recent records and first nest records of Henslow's sparrow in North Dakota

The northwestern limit of the Henslow's sparrow ( Ammodramus henslowii ) breeding distribution occurs in southern Minnesota and central Wisconsin. In North Dakota, observations of Henslow's sparrows are reported infrequently, and there are no published nest records in the state. Herein, we summarize and review previous reports of Henslow's sparrows in North Dakota and document the first two nest records of Henslow's sparrow in the state.

North Dakota↗
USGS2012

Geologic and environmental characteristics of porphyry copper deposits with emphasis on potential future development in the Bristol Bay Watershed, Alaska (Appendix H)

This report is prepared in cooperation with the Bristol Bay Watershed Assessment being conducted by the U.S. Environmental Protection Agency. The goal of the assessment is to help understand how future large-scale development in this watershed may affect water quality and the salmon fishery. Mining has been identified as a potential source of future large scale development in the region, especially because of the advanced stage of activity at the Pebble prospect. The goal of this report is to summarize the geologic and environmental characteristics of porphyry copper deposits in general, largely on the basis of literature review. Data reported in the Pebble Project Environmental Baseline Document, released by the Pebble Limited Partnership in 2011, are used to enhance the relevance of this report to the Bristol Bay watershed. The geologic characteristics of mineral deposits are paramount to determining their geochemical signatures in the environment. The geologic characteristics of mineral deposits are reflected in the mineralogy of the mineralization and alteration assemblages; geochemical associations of elements, including the commodities being sought; the grade and tonnage of the deposit; the likely mining and ore-processing methods used; the environmental attributes of the deposit, such as acid-generating and acid-neutralizing potentials of geologic materials; and the susceptibility of the surrounding ecosystem to various stressors related to the deposit and its mining, among other features (Seal and Hammarstrom, 2003). Within the Bristol Bay watershed, or more specifically the Nushagak and Kvichak watersheds, the geologic setting is permissive for the occurrence of several mineral deposit types that are amenable for large-scale development. Of these deposit types, porphyry copper deposits (e.g., Pebble) and intrusion-related gold deposits (e.g., Shotgun) are the most important on the basis of the current maturity of exploration activities by the mining industry. The Pebble deposit sits astride the drainage divide between the Nushagak and Kvichak watersheds, whereas the Humble, Big Chunk, and Shotgun deposits are within the Nushagak watershed. The Humble and Big Chunk prospects are geophysical anomalies that exhibit some characteristics similar to those found at Pebble. Humble was drilled previously in 1958 and 1959 as an iron prospect on the basis of an airborne magnetic anomaly. Humble is approximately 85 miles (137 km) west of Pebble; Big Chunk is approximately 30 miles (48 km) north-northwest of Pebble; and Shotgun is approximately 110 miles (177 km) northwest of Pebble. The H and D Block prospects, west of Pebble, represent additional porphyry copper exploration targets in the watershed.

Alaska↗