USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Monitoring and Assessment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,229 records · Page 4Linked to original sources
USGS2026

Open-source gravity reduction workflows for geothermal resource assessment

Potential-field geophysical data such as gravity can enhance understanding of geothermal resources at all stages of the resource life cycle, including assessment, exploration, development, and monitoring, and at multiple scales, from the reservoir scale to regional scale. However, to make gravity data useful for geothermal resource characterization, several processing steps are required to isolate the effects of density variations in the Earth’s crust to enable the identification of structural features associated with geothermal resources. Although this process is well-established, standard computational implementations for processing gravity data that are FAIR (Findable, Accessible, Interoperable, and Reproduceable) are still lacking. This paper details ongoing efforts at the U.S. Geological Survey (USGS) to develop a standard set of open-source Python tools for gravity data reduction that align with the FAIR principles. This workflow makes use of existing open-source tools for geophysical data processing with the goal of maximizing opportunities for rapid improvements, interoperability, and adaptability to other types of geophysical data.

Conference Paper↗
USGS2025

Spatiotemporal variability of algal biomass and nitrate in Owasco and Seneca Lakes in the Finger Lakes Region, New York, in 2019

Cyanobacterial harmful algal blooms (CyanoHABs) have become increasingly common, threatening the security of water resources globally. The U.S. Geological Survey conducted high-resolution nearshore mapping surveys using boat-mounted multiparameter sondes and nitrate sensors during the summer and fall of 2019 on Owasco Lake and Seneca Lake, two lakes with documented CyanoHABs in the Finger Lakes region of New York State. Discrete sensor measurements and water-quality samples were collected at fixed points along survey routes and continuous data were generated at open-water monitoring platforms. This investigation examined whether water-quality information from nearshore surveys was representative of open-water conditions and if nearshore surveys could be used to identify areas with localized nearshore CyanoHABs and potential sources of nutrients not captured by tributary sampling. In addition to comparisons across methods, nearshore concentrations of nitrate and chlorophyll were evaluated relative to tributary outlets, cyanobacterial abundance and biovolume at discrete locations, and the locations of near-surface CyanoHABs that were designated as “confirmed with high toxins” by the New York State Department of Environmental Conservation. Nitrate and chlorophyll concentrations were comparable across methods for each lake, although concentration ranges were typically higher for nearshore mapping datasets than for nearshore discrete datasets. Nearshore surveys indicated areas of nitrate enrichment that varied temporally in both lakes. Orthophosphate was not routinely detected. Across methods, median chlorophyll concentrations were higher for the summer survey than for the fall survey in Owasco Lake. Nearshore chlorophyll concentrations varied more temporally in Owasco Lake than in Seneca Lake. Phytoplankton and cyanobacterial abundance and biovolume were about five times higher in Owasco Lake than in Seneca Lake. Cyanobacteria dominated the phytoplankton community in most samples, and Microcystis comprised the bulk of the cyanobacterial biovolume. The most abundant potential cyanotoxin-producing (specifically microcystins) genera were Microcystis , Synechococcus , Aphanocapsa , and Pseudanabaena . The cyanobacterial community composition was comparable between open-water monitoring platforms and nearshore samples. Microcystins were detected in seven survey samples from Owasco Lake, in one survey sample from Seneca Lake, and in one sample each from the open-water monitoring platforms on Owasco and Seneca Lakes that were collected about 7 days before the fall surveys. Microcystin detections were not consistently associated with high cyanobacterial cell counts or cyanotoxin-producing genera. Results from nearshore surveys were comparable to open-water monitoring platforms and discrete nearshore observations in the absence of nearshore or open-water CyanoHABs in these systems during the study. Patterns of nearshore concentrations of nitrate and chlorophyll from nearshore surveys may aid in the identification of areas with localized nitrate loading and shifts in phytoplankton abundance and community composition.

New York↗
USGS2024

Ground deformation and gravity for volcano monitoring

Introduction When magma accumulates or migrates, it can cause pressurization and related ground deformation. Characterization of surface deformation provides important constraints on the potential for future volcanic activity, especially in combination with seismic activity, gas emissions, and other indicators. A wide variety of techniques and instrument types have been applied to the study of ground deformation at volcanoes (sidebar, p. 2; Dzurisin, 2000, 2003, 2007). Geodetic instruments include continuously recording Global Navigation Satellite System (GNSS; of which the United States’ Global Positioning System is one example) stations (fig. D1), borehole tiltmeters, and interferometric synthetic aperture radar (InSAR) measurements (from satellites, occupied and unoccupied aircraft systems, and ground-based sensors). Additional geodetic measurements like continuous- and survey-mode gravity (fig. D2) can contribute substantially to interpreting these data. Borehole strainmeters (see chapter K , this volume, by Hurwitz and Lowenstern, 2024) also have outstanding utility for monitoring deformation, although because of cost and permitting challenges, we do not include them as part of standard volcano monitoring networks for U.S. volcanoes. Still other techniques like light detection and ranging (lidar), structure from motion, and optical satellite data can be used to derive gross topographic changes, which can be used to map volcanic deposits, infer eruption rates, and gain insights into the source processes associated with eruptive activity (see chapter G , this volume, on tracking surface changes caused by volcanic activity; Orr and others, 2024). Experience has shown that no single geodetic monitoring technique is adequate to detect and track the entire range of ground-motion patterns that occur at volcanoes, primarily because of the temporal and spatial diversity of volcano deformation (fig. D3). Similarly, the magnitude of surface deformation varies widely. Geodetic monitoring strategies should therefore include multiple techniques and instrument types to cover a wide range of spatial and temporal scales. In identifying recommendations for geodetic instrumentation for volcano monitoring networks, we attempted to maximize the diversity of instrument types to measure the full range of deformation signals and minimize their expense and number; thus, we do not include several well-known deformation-monitoring techniques in our recommendations. Extensometers, for example, measure strains over distances of a few meters and have an excellent record of success in detecting changes in preeruptive localized ground motion across existing cracks, including at Mount St. Helens, Washington (Iwatsubo and others, 1992), and Piton de la Fournaise, Réunion Island (Peltier and others, 2006). Despite being relatively inexpensive, extensometers are best used primarily when localized ground displacements (for example, ground cracks) need to be tracked, and are not necessary at all volcanoes. In considering volcano deformation monitoring strategies, two complicating factors are deserving of special attention. First, not all deformation is driven by subsurface magmatic activity—for example, at many large stratovolcanoes (for example, Mount Rainier), flank collapses and landslides are significant geologic hazards (Reid and others, 2001) that may occur even in the absence of magmatic activity. Monitoring the stability of volcanoes is thus another critical application of geodetic monitoring networks to inform hazard assessment. One of the most famous examples of edifice instability is the large flank collapse that initiated the May 18, 1980, eruption of Mount St. Helens. Deformation monitoring had detected a bulge on the north flank of the mountain in April 1980 that was expanding by several meters per day (Lipman and others, 1981). Given that flank collapses can happen at any time during a period of volcanic unrest (or even outside a period of unrest), the capability to assess edifice stability is critical. Second, although volcanoes are commonly treated as idealized structures that erupt from single points, like centralvent stratovolcanoes, many are characterized by long rift zones from which eruptions may originate, and distributed volcanic fields are characterized by broadly spaced vents. For example, linear dikes are common at Kīlauea, Mauna Loa, and between Mount Shasta and Medicine Lake in California. At Kīlauea, one of these linear dikes emerged more than 40 kilometers (km) away from the summit of the volcano during the lower East Rift Zone eruption in 2018. Other volcanic fields, like Lassen volcanic center, California, or the San Francisco Volcanic Field, Arizona, have many small vents spread over a wide area. Although the instrumentation guidelines presented in this chapter remain phrased for central-vent volcanoes, they should be modified as needed in the context of the eruptive characteristics of each individual volcanic system. Spatial analysis of geodetic network coverage could help to ensure adequate instrumentation in areas where volcanism can occur over a broad area as opposed to a central vent. As an example, consider the adjacent volcanoes Mount Shasta and Medicine Lake. If station locations are chosen based only on the distance from the centers of the volcanoes, then any geodetic anomalies between the two volcanoes—an area of potential volcanism as indicated by the presence of volcanic features—may remain undetected by ground-based instrumentation. The spatial analysis is accomplished via a grid of pressure point sources (Mogi, 1958) evenly distributed across the map area, at a depth of 5 km in this example (fig. D4). Each source is inflated until predicted deformations exceed the GNSS white noise uncertainty estimates at one site (Langbein, 2017; Murray and Svarc, 2017). This volume of detectable magma provides a measure of the quality of the coverage (fig. D4). The results indicate that, as of 2022, there is a large area between Mount Shasta and Medicine Lake volcano with existing mapped dikes in which a substantial amount of magma could intrude without being detected geodetically. Applying this style of analysis to individual volcanic systems can provide a guide for designing network geometry given the expected locations of future eruptions.

Scientific Investigations Report↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗
USGS2025

Water-resources inventory and assessment at Katahdin Woods and Waters National Monument

The U.S. Geological Survey, in cooperation with the National Park Service, prepared a water-resources inventory and assessment for Katahdin Woods and Waters National Monument (KAWW). This compilation includes published and publicly accessible hydrologic data and resource assessments of streams, rivers, ponds, lakes, wetlands, vernal pools, and groundwater in and near KAWW. It also includes reports and datasets summarizing attributes of KAWW’s hydrologic infrastructure, such as stream crossings, dams, wastewater discharge plants, groundwater monitoring wells, and U.S. Geological Survey streamflow-gaging stations. Descriptions of data and details of current limitations in available datasets are included. Wetland, groundwater, streamflow, and water-quality information are all limited. Hydrography data are available; however, there are limited ground-truth data. Accurate streamlines within KAWW were developed from light detection and ranging (lidar) as a part of this work. Hydrologic infrastructure information is available from multiple sources; however, differences exist among the datasets. Datasets are summarized in appendix 1.

Maine↗
USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗
USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗
USGS2026

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes↗
USGS2025

Analyzing multi-year nitrate concentration evolution in Alabama aquatic systems using a machine learning model

Rising nitrate contamination in water systems poses significant risks to public health and ecosystem stability, necessitating advanced modeling to understand nitrate dynamics more accurately. This study applies the long short-term memory (LSTM) modeling to investigate the hydrologic and environmental factors influencing nitrate concentration dynamics in rivers and aquifers across the state of Alabama in the southeast of the United States. By integrating dynamic data such as streamflow and groundwater levels with static catchment attributes, the machine learning model identifies primary drivers of nitrate fluctuations, offering detailed insights into the complex interactions affecting multi-year nitrate concentrations in natural aquatic systems. In addition, a novel LSTM-based approach utilizes synthetic surface water nitrate data to predict groundwater nitrate levels, helping to address monitoring gaps in aquifers connected to these rivers. This method reveals potential correlations between surface water and groundwater nitrate dynamics, which is particularly meaningful given the lack of water quality observations in many aquifers. Field applications further show that, while the LSTM model effectively captures seasonal trends, limitations in representing extreme nitrate events suggest areas for further refinement. These findings contribute to data-driven water quality management, enhancing understanding of nitrate behavior in interconnected water systems.

Alabama↗
USGS2025

Integrating marine historical ecology into management of Alaska’s Pacific cod fishery for climate readiness

The Pacific cod ( Gadus macrocephalus ) fishery was closed in 2020 after a rapid decline in biomass caused by the marine heat waves of 2014–2019. Pacific cod are exceptionally thermally sensitive and management of this fishery is now challenged by increasingly unpredictable climate conditions. Fisheries monitoring is critical for climate readiness, but short-term monitoring data may be inadequate for recognizing and anticipating change under rapid climate changes. We propose an interdisciplinary, marine historical ecology framework that looks to long-term records (local and traditional knowledge, history, archaeology, and paleoclimatology) to capture a long range of ecological variability and provide historical context for management. In order to connect to contemporary fisheries management, this framework must be built on a common vocabulary and an understanding of the key metrics used in fisheries stock assessments. Here, we propose metrics derived from Pacific cod stock assessment and synthesize information relevant to understanding the effects of past warming periods on cod populations across the Gulf of Alaska and Bering Sea. This case study provides a framework for thinking about how to use these historical records in the context of fisheries management under rapidly changing climate conditions.

Alaska↗
USGS2026

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗
USGS2025

PFAS sampling activities in the U.S. Geological Survey national networks

Per- and polyfluoroalkyl substances (PFAS), frequently called “forever chemicals,” are used for a wide variety of industrial purposes and are often found in common household and industrial items such as firefighting foams, non-stick cookware, and water-resistant materials. The contamination of water, air, and soil by PFAS is a national and global issue due to their widespread occurrence in multiple applications and resistance to biodegradation and other traditional treatment processes. Research indicates that many PFAS can be emitted to the atmosphere and transported and deposited long distances from the source. The U.S. Geological Survey (USGS) Water Resources Mission Area received funding to implement a national-scale sampling effort to assess PFAS occurrence. To follow agency directives, the National Water Quality Network (NWQN) added PFAS sample monitoring for both surface water and groundwater, and also added PFAS monitoring to selected sites in the National Atmospheric Deposition Program (NADP).

General Information Product↗
USGS2026

Assessing future hydrologic extremes using an integrated hydrology and river operations model in the Russian River watershed

Study region The Russian River watershed, situated in coastal, northern California, experiences hydrologic extremes, including periodic droughts and flooding. Water managers are working to maintain sustainable water supplies and environmental flows, while mitigating flood risks. Study focus This paper introduces an integrated hydrology and river operations model for the Russian River watershed. This model is distinct from models in previous studies because it represents surface-groundwater interactions and uses climate forcings to estimate dynamic water use demands that are superimposed onto both reservoir operations and water supply constraints. The model was used to examine three historical (1990–2015) and eight future (2016–2099) water use and climate change scenarios. New hydrological insights for the region The direct connection between streams and aquifers facilitated both annual aquifer replenishment by high winter streamflows and streamflow depletion by groundwater wells (19 % of pumped groundwater in alluvial aquifers from stream leakage) during critical low flow periods. Simulated streamflow changes included 59 % longer and 54 % more severe streamflow droughts, 26 % lower seasonal low streamflows, and up to 125 % higher peak streamflows, averaged over future climate and water use scenarios, suggesting increased future flood and water availability risks. Results showed the importance of reservoir operations for mitigating the impacts of increased hydroclimatic volatility, despite a decrease in reservoir reliability at Lake Mendocino, suggesting that reservoir management may be used to decrease future risks.

California↗
USGS2025

Overcoming the data limitations in landslide susceptibility modelling

Data-driven models widely used for assessing landslide susceptibility are severely limited by the landslide and environmental data needed to create them. They rely on inventories of past landslide locations, which are difficult to collect and often nonrepresentative. Furthermore, susceptibility maps are most needed in regions without the means to assemble an inventory. To overcome these challenges, we develop a method for assessing shallow landslide susceptibility based on a probabilistic morphometric analysis of the landscape’s topography, rather than the characteristics of landslides. The model assumes that hillslopes with higher relief and gradient compared to the surrounding landscape are more prone to landslides. We demonstrate the superior performance of this approach over contrasting data-driven models across the northwestern United States. As our morphometric model only requires elevation data, it overcomes the major limitations of data-driven models and facilitates the creation of effective susceptibility models in areas where it was previously unfeasible.

Oregon, Washington↗
USGS2025

System characterization report on the Environmental Mapping and Analysis Program (EnMAP)

This report addresses system characterization of the Environmental Mapping and Analysis Program hyperspectral sensor by the DLR (German Aerospace Center, ground segment project management), GFZ (Deutsches Geoforschungszentrum, science lead) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the EnMAP hyperspectral sensor; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), and radiometric performances of the EnMAP hyperspectral sensor. Results of these analyses indicate that the Environmental Mapping and Analysis Program has a band-to-band geometric performance in the range of −0.135 to 0.15 pixel, geometric performance relative to the Operational Land Imager in the range of −27.716 meters (−0.92 pixel) to 32.892 meters (1.09 pixels) offset in comparison to Landsat 8 Operational Land Imager, offset of a radiometric comparison in the range of −0.012 to 0.020, slope of a radiometric comparison in the range of 0.947 to 1.031.

Open-File Report↗
USGS2025

Using visualization science to inform the design of environmental decision-support tools—A case study of the U.S. Geological Survey Waterwatch

Environmental decision-support tools are increasingly being used to serve both expert and non-expert audiences. Many existing tools are primarily expert-focused, and redesigning them can be challenging because experts and non-experts interact with tools differently, existing users may be resistant to changes, and there is little guidance on how to prioritize redesign efforts and demonstrate their efficacy. In this report, we present a case study of a user-centered redesign of an established environmental decision-support tool—the U.S. Geological Survey WaterWatch. WaterWatch supports flood, drought, and other water resource management decisions through the display of water levels at gages across the United States. Using a participatory process, we identified a functional change (replacing the existing rainbow colormap), created an alternative design, and tested the alternative’s usability through two general public surveys. The results showed that replacing the rainbow colormap with a more intuitive diverging colormap improves usability, regardless of the audience’s subjective preference for the rainbow color scheme. In addition, we demonstrated the importance of using legends to improve the audience’s understanding of the map symbols. This study demonstrates how user-centered design approaches can be used to inform the design of high-profile products and tools.

Scientific Investigations Report↗
USGS2026

Hydrologic variability drives environmental and geospatial relationships in Smallmouth Bass (Micropterus dolomieu) distribution

Hydrologic variation is a primary driver of stream ecosystems. Changing hydrology can lead to assemblage shifts and alterations in suitable habitat for freshwater species. As climate change is predicted to alter flow patterns in addition to increasing water temperatures, insight into relationships between species occupancy, hydrology, and temperature is critical for understanding current and future distributions. We examined how hydrologic variability, temperature, and other environmental variables interact to influence Micropterus dolomieu (Smallmouth Bass) occurrence. We used Spatial Stream Network models, allowing for the incorporation of spatial autocorrelation along streams' unique dendritic network, to examine Smallmouth Bass occupancy across a range of hydrologic variation in the Ozark-Ouachita Interior Highlands, USA. Hydrologic variation was the main driver of Smallmouth Bass occurrence, with occurrence more likely in groundwater streams with low hydrologic variation and high flow permanence. For groundwater streams, occurrence was positively associated with summer stream temperature and negatively associated with annual stream temperature. As variation increased, more variables showed significant relationships with occurrence. Distance metrics were important for all models, however as hydrologic disturbance increased, flow connected distance played a lesser role and stream distance played a greater role. Hydrologic variability was the overarching determinant of Smallmouth Bass occurrence and strongly influenced the predictive importance of environmental variables and geospatial relationships. Greater hydrologic variability resulted in stronger statistical relationships between occurrence and environmental variables and an increased importance of system connectivity. As climate change alters hydrologic processes and streams become more variable, understanding and accounting for these shifting relationships is essential.

Arkansas, Kansas, Missouri, Oklahoma↗