USGS Science⌕ Search

SEARCH · USGS Science

Results for “Conference Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

188 records · Page 4Linked to original sources
USGS2025

Evidence for offset of Cretaceous plutons by the Tintina fault in eastern Alaska: Implications for regional metallogeny

Cretaceous magmatism in eastern interior Alaska is voluminous, but temporally and spatially diverse – suggestive of varying sources and drivers. More than 150 new U-Pb zircon and more than 500 geochemical analyses of Cretaceous plutonic units allow for the grouping of distinct plutonic suites. Magmatism was continuous from 120-66 Ma but can be grouped into temporally distinct pulses from ca. 115-100 Ma, 100-90 Ma, and 75-66 Ma. Geochemical diversity occurs during each pulse, further distinguishing multiple suites. Diverse metallogenic epochs are strongly correlated to pluton chemistry. Mineralization is largely absent prior to 108 Ma. From 108-100 Ma, plutonism is coeval with sparse, but notable Au-quartz veins with variable Bi, As, W, and Mo. From 100-90 Ma, intrusion-related mineralization zones from Au-Cu(-Bi) and U-Th in the northwest to central Au- Bi-As-Te(-W), and Mo-W to the southeast. Porphyry style Cu-Mo(-Au) occurrences occur with the latest Cretaceous plutons emplaced from 75-66 Ma . Restoration of ~450 km of dextral movement on the Tintina fault and comparison of metallogenic and geochemical characteristics of Alaska plutons suggest 100-90 Ma plutons may be the continuation of the metallogenically significant Tombstone, Mayo, and Tungsten suites from the Yukon.

Alaska↗
USGS2024

U.S.-Mexico Borderland & vegetation community map

People on both sides of the United States-Mexico border need a high-resolution, binational vegetation community map that spans the entire United States-Mexico borderlands. Traditionally, mapping efforts in this region were impeded by complex logistics related to the international border, differing national needs and plans, and resource allocations and priorities. To address this need, scientists from the U.S. Geological Survey (USGS) Southwest Biological Science Center partnered with the Sonoran Joint Venture, the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program, data engineers from the Department of Biosystems Engineering at the University of Arizona, and collaborators from the Wildlands Network, the Borderlands Program to produce the first prototype land cover map within the overlapping Mojave Desert, Sonoran Desert, and the North American Bird Conservation Initiative’s Bird Conservation Region 33 (BCR33) using Landsat satellite data . BCR33 is an area of high biodiversity, providing habitat for bird species of concern and other wildlife. The land cover map supports FWS recovery plan efforts related to conservation planning activities for many species, including Yellow-billed Cuckoo ( Coccyzus americanus ), Cactus Ferruginous Pygmy-Owl ( Glaucidium brasilianum cactorum ), Southwestern Willow Flycatcher ( Empidonax traillii extimus ), Yuma Ridgway’s Rail ( Rallus obsoletus yumanensis ), Bendire’s thrasher ( Toxostoma bendirei ), LeConte’s thrasher ( Toxostoma lecontei ), Masked Bobwhite ( Colinus virginianus ridgwayi ), jaguar ( Panthera onca ), and endangered plants such as Bartram’s stonecrop ( Graptopetalum bartramii ) and the Pima pineapple cactus ( Coryphantha robustispina ssp. robustispina ). In 2024, a Phase-II map for the full BCR33 region was completed, increasing the understanding of the binational nature of natural communities. The published map and associated paper can be found here .

Borderland↗
USGS2025

Avak Creek oil occurrence, North Slope, Alaska: Newly discovered oil seep on Native lands, near village of Utqiagvik

An unknown occurrence of oil was detected near Avak Creek on Native lands on the North Slope of Alaska. Determining the source of oil was imperative for allowing stakeholders (Federal, State, and local government agencies and the landowner, an Alaska Native corporation) to make timely and informed decisions and mount a mitigation response, if required. The regional and local geological framework of the Avak Creek site was constructed using seismic surveys, well data, and basin modeling results, to identify local petroleum systems, map structural geometry and faults, define source rock thermal maturity distributions, and infer likely oil-migration pathways. Molecular hydrocarbon fingerprints (biomarkers, diamondoids, compound-specific isotopes) of the oil were compared to those of local and regional oil seeps, exploration well tests, and produced oils. Biomarker acid distributions characterized the history and extent of petroleum biodegradation. Integrating subsurface and geochemical parameters, the oil is interpreted to be a natural seep generated locally, predominantly from the Brookian Lower Cretaceous Hue Shale/gamma-ray zone, rather than an anthropogenic source of pollution. Results highlight sophisticated analytical technologies used to characterize complex, compositionally altered hydrocarbons. Results also advance our understanding of Brookian source rock distribution, subsurface petroleum migration pathways, and Arctic Alaska petroleum systems.

Alaska↗
USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗
USGS2025

Tracing fluid evolution during batholith and deposit formation: In-situ and bulk rock Mo isotopes from the Questa porphyry Mo deposit, New Mexico, USA

The Oligocene Questa porphyry Mo deposit, located in New Mexico, USA, is a well-characterized system that formed over 400 kyr, punctuating the 8 Myr formation of the Questa-Latir batholith. Detailed sampling of the intrusions and minerals associated with magmatichydrothermal mineralization, as well as bookending barren intrusions, allows for examination of the Mo isotope record of the deposit and its host batholith. Through this established chronologic framework, such data can yield insights into the metallogenesis of deposit formation and long-term magma genesis evolution for upper crustal magmatism. The Mo isotopic compositions of barren intrusions yield a younging trend towards lighter δ 98 Mo. However, intrusions associated with Mo deposit formation yield heavier δ 98 Mo relative to barren magmatism, by up to 2.0‰. This indicates that they were affected by an isotopically heavy and Mo-rich fluid. The in-situ data from molybdenite covers the range observed in mineralized bulk rocks. However, individual samples consistently yield Mo isotopic variations of 0.4‰ to 0.5‰. The consistency of the δ 98 Mo variation in in-situ analyses of molybdenite within hand samples and individual mineral grains is likely the result of MoS 2 crystallization in a closed system and reflects an almost complete precipitation of Mo.

New Mexico↗
USGS2025

The effects of line simplification on planform geometry

Data on maps should retain accuracy regardless of scale. Yet, as cartographic lines are generalized, there can be impacts on properties such as topology, density, and planform geometry. Here, we investigate the use of the Scale Specific Sinuosity (S3) metric (Stanislawski et al., 2023) to evaluate the effects of line simplification on planform geometry, which is the bends of streams in map view. We employ an open-source Python S3 workflow to characterize the geometry of five diverse stream channels in the United States. The original data are extracted from the U.S. Geological Survey National Hydrography Dataset 1:24,000-scale vector data (U.S. Geological Survey, 2000) (Table 1), and the simplification is done using the Visvalingam and Whyatt method (2017) with a simplification tolerance of 0.5, 1.0, 1.5, and 2.0 km. The S3 analysis is calculated at each level of simplification and S3 derivatives are generated. Derivatives include measures of sinuosity, fractal dimension, and the dominant bend wavelength. The findings show that the change in planform geometry is scale-dependent, though simplification will have little effect on straighter lines. The change becomes more apparent in complex lines as the degree of simplification aligns with the scale of the dominant bend geometries. These logical conclusions are evidence that the S3 is a useful metric for automated characterization of bend geometry regardless of line complexity.

Conference Paper↗
USGS2024

Simulated ground-motion records for the seismic assessment of monumental masonry structures

Earthquakes are natural disasters that can cause widespread devastation and loss of life. Simulated ground-motion records can be useful in regions with limited seismic stations or a history of damaging but infrequent earthquakes. This is especially true in areas with a high concentration of heritage masonry structures, which are especially susceptible to damage, as simulated records can be crucial in predicting their seismic response and protecting these buildings from seismic damage. Despite the importance of simulated earthquakes, few studies have investigated how effective they are compared to real earthquakes when assessing the structural response of heritage buildings. To address this knowledge gap, we employ two different simulation methods of the Mw 6.2 Faial earthquake, which occurred on July 9th, 1998, in the Azores, to replicate the recorded time-series at four available stations within an epicentral distance of 150 km. The study has two objectives: first, to validate the simulated records of the 1998 Faial earthquake using alternative stochastic ground-motion simulation approaches, and second, to determine how these approaches impact the seismic assessment of historic masonry structures. To accomplish these objectives, this study uses real and simulated ground-motion datasets to conduct non-linear response history analyses of the São Francisco Church, a monumental structure in Horta that sustained damage during the Faial earthquake. The results show that both simulation approaches yield structural responses similar to the observed records.

Conference Paper↗
USGS2025

Detecting hidden sedimentary geothermal systems in the Upper Colorado River Basin

Geothermal resources exist in sedimentary rock where circulation of water for efficient extraction or storage of heat is possible. Except in rare instances where hot water is expressed at the land surface, sedimentary geothermal resources are hidden, so the identification of these systems is optimally accomplished using predictive subsurface modeling. An integrated approach using detailed paleogeographic interpretations, subsurface geologic mapping, and numerical modeling has produced regional geologic and temperature models for the Upper Colorado River Basin, a large watershed in central North America that contains many sedimentary basins. These models identify areas of hidden sedimentary geothermal resource potential in low temperature (<90°C), moderate temperature (90–150°C), and high temperature (>150°C) fairways across the study area. These models incorporate maps of key horizons in outcrop and the subsurface to create a robust structural framework that can be used to target favorable geology for natural or engineered permeability. This framework is populated with lithologies derived from detailed palaeogeographical maps and over 40,000 bottom hole temperature (BHT) values were used to create a calibrated three-dimensional (3D) temperature model across the region. The resulting maps serve as a regional sedimentary geothermal play fairway screening tool for evaluating different grades of sedimentary geothermal resources and for identifying areas of interest where more detailed, prospect-scale studies can be undertaken.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2025

The role of alkali bicarbonate-sulfate brines in the genesis of carbonatite REE resources at the Bear Lodge Alkaline Complex, Wyoming

Rare-earth element (REE) resources in the Bear Lodge Alkaline Complex, Wyoming, are hosted in a variably leached carbonatite dike swarm spatially related to bodies of diatreme breccia. This study examines fluid inclusions in carbonatite dikes, peripheral fluorite breccias, and smoky quartz veins to reconstruct the physiochemical conditions of REE mineralization. Results reveal a multi-stage evolution of carbonatitic fluids: 1) high-temperature (330–432°C), CO 2 -rich magmatic fluids, 2) REE-enriched alkali bicarbonate-sulfate brines, and 3) low-temperature meteoric (117–182°C) or diluted magmatic fluids. Multiphase inclusions (stage-2) contain burbankite, nahcolite, and alkali sulfate daughter crystals, linking the brines to early burbankite [(Na,Ca) 3 (Sr,Ba,REE) 3 (CO 3 ) 5 ] mineralization in carbonatite. REE mobility has been linked to the stability of aqueous complexes with ligands such as Cl-, SO 4 2- , and HCO 3 - . However, light REEs were not initially transported significant distances, rather they crystallized as burbankite from brines or brine-melts associated with the carbonatite magma. Crystallization of burbankite removed Na from the system, leaving residual fluids with high K/Na ratios and promoting potassic fenitization throughout the complex. Fractionation of light and heavy REEs and involvement of low temperature (<300°C), high K/Na bicarbonate brines may have facilitated transport and formation of peripheral occurrences that are more enriched in heavy REEs at Bear Lodge.

Wyoming↗
USGS2024

Recent applications of the USGS National Crustal Model for Seismic Hazard Studies

The U.S. Geological Survey is developing the National Crustal Model (NCM) for seismic hazard studies to facilitate modeling site, path, and source components of seismic hazard across the conterminous United States. The NCM is composed of a 1km grid of geophysical profiles, extending from the Earth’s surface into the upper mantle. It is constructed from a threedimensional (3D) geologic framework and geophysical rules that use (1) a petrologic and mineral physics database; (2) a 3D temperature model; and (3) a calibrated rock type- and age-dependent porosity model. Parameters needed to estimate site response for existing ground motion models (GMMs), including the time-averaged velocity in the upper 30 meters (VS30), the depths to 1.0 and 2.5 km/s shear-wave velocity (Z1.0 and Z2.5), and sediment thickness, can be computed from the NCM. As GMMs continue to improve in the future, other metrics could also be extracted or derived from the NCM, such as fundamental period, site attenuation (ko), a fully frequency-dependent site response function, or 3D geophysical volumes for wavefield simulations. Application of the NCM may also benefit other aspects of seismic hazard analysis, including better accounting for path-dependent attenuation and geometric spreading, more accurate estimation of earthquake source properties such as hypocentral location and stress drop, and calculation of crustal strength profiles that inform estimates of the base of seismicity.

conterminous United States↗
USGS2025

Constraining large magnitude event source and path effects using ground motion simulations

The purpose of this study is to use ground motion simulations to investigate ways in which source and path effects for large magnitude events can be represented in non-ergodic GMMs. While we initially developed computation techniques using CyberShake simulations, the range of magnitudes and source-site combinations is not adequate to replicate what is observed empirically. We therefore designed a new ground motion simulation study, which includes earthquakes with a large range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of simulations (M4-M7), we then develop a non-ergodic GMM with the simulation data. We find that the within-site residuals are dominated by the radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within-site residuals among multiple source realizations. Finally, after removing the source effects from the within-site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site with the large events, while the second approach considers all small events on the fault plane. The results indicate that the path effects of large events cannot be satisfactorily approximated with that of small events using either approach.

Conference Paper↗
USGS2025

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗
USGS2026

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS2024

The new self-anchored suspension (SAS) San Francisco Bay Bridge- Its response to a small earthquake

This paper presents a summary of previously published work (Celebi 2023) related to the new Self-Anchored Suspension (SAS) bridge that went into service within the last decade as a replacement for the older truss bridge spanning between Yerba Buena Island and Oakland, California, within the San Francisco Bay Area. During the October 19, 1989 M6.9 Loma Prieta earthquake, which occurred ~100 km south of the Bay Bridge, a section of the upper deck of the truss bridge fell onto the lower deck – thus closing this important lifeline between San Francisco and Oakland. The SAS is unique, self-anchored, and suspended by a single tower that is pivotal in trafficking the cable and hanger system to support the decks. The SAS bridge is extensively instrumented by the California Geological Survey’s Strong Motion Instrumentation Program (CSMIP). There are approximately 85 channels of accelerometers in the seismic monitoring system that recorded the October 14, 2019 Mw4.6 Pleasant Hill earthquake. The data allow a complex but identifiable coupled response of the deck, tower, and cable system. Both acceleration and displacement time-history data are used to extract significant frequencies using system identification methods, including spectral analyses. Results are compared to those from finite-element-model (FEM) analyses carried out during the design and analysis process of the bridge in 2002 (Nader et al. 2002). There are differences between FEM analyses results and those from the low amplitude shaking caused by a seismic event. An apparent frequency (period) of the SAS bridge is assessed (approximately 5.2 seconds). In a plot of deck length versus period, there is an almost linear relationship with periods of other regular suspension bridges, such as the Golden Gate Bridge and the Carquinez Bridge, both in the San Francisco Bay.

California↗
USGS2024

New developments at the Center for Engineering Strong-Motion Data (CESMD)

The Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a single access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System, and other affiliates. The CESMD has been continuously improving its webtools to facilitate the access of strong-motion data and metadata for use in post-earthquake response and for scientific and engineering research applications. The Center provides raw and processed strong-motion data via the Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals. This paper focuses on the strong-motion products provided by the EDC where more than 48,000 records with peak ground accelerations greater than 0.1% g from over 2400 earthquakes are currently hosted. and on the ongoing efforts to develop data access tools and applications. The new developments and ongoing efforts in the EDC include: 1) enhancements to the CESMD webservices to facilitate access to station metadata, earthquake information, and strong motion records 2) new features to the interactive map interface, improving the visualization and access to earthquake, station, and record information, 3) efforts to develop a new web application tool for data format conversion from a number of data formats, 4) efforts to unify varying waveform data formats into a consistent format, 5) ongoing efforts to compile seismic station site geology, measured or inferred Vs30 values, shear-wave profiles, NEHRP site class, and available structural instrument deployment schematics, and 6) a special studies pages for research topic-specific ground motion datasets that offer uniform processing of records from a variety of sources.

Conference Paper↗
USGS2024

Seismic response comparison of a historical masonry church subject to real and simulated ground motions

In recent years, advanced numerical models and high-performance computing have facilitated the utilization of ground motion time series in the assessment of the non-linear dynamic behavior of historic masonry structures. Since recorded accelerograms can be sparse for specific analysis conditions, stochastic ground motion simulations have become a viable alternative to overcome this limitation. This study simulates the recorded acceleration time series of the Central Italy 2016 earthquake event at the closest station to the town of Macerata using a site-based stochastic approach. The simulated motions are seismologically evaluated using a goodness-of-fit method in terms of various intensity measures. The simulated records, in conjunction with real records, are used to study the non-linear dynamic behavior of San Filippo Neri church located in Macerata. The church of San Filippo represents an important example of Baroque religious architecture in central Italy, which was damaged and closed off to the public after the 2016 earthquake events. The construction was investigated with a vast diagnostic campaign which included on-site testing and dynamic identification tests. The collected data is used to calibrate the dynamic response of a three-dimensional finite element model of the church. The model is finally used to compare the non-linear seismic responses under real and simulated ground motions with the site recorded damage. The results of structural responses demonstrate a strong agreement between the real and simulated records, providing evidence to support the validation of the site-based stochastic simulation.

Macerata↗
USGS2024

Models no not provide proof: An example of model ambiguity and application of isotopic data in a mine pit lake

Geochemical and hydrologic models of pit lakes are commonly used in environmental regulatory decisions to predict future water quality and hydrologic conditions and to understand existing pit lakes. Models may be used to quantify sulfide oxidation, predict thermal/chemical stratification and mixing, and better understand connections between pit lakes and aquifers. One concern related to the hydrologic character of pit lakes is if they are terminal (a groundwater sink with no outflow) or flowthrough (both receiving groundwater inflow and discharging to groundwater). This question was pertinent to the Liberty pit lake, a small acidic pit lake formed in a former Cu deposit in south-central Nevada where potentiometric and geochemical data potentially indicate pit-lake outflow. Potential discharge to groundwater from the pit lake was evaluated using a water-balance model, but uncertainty in hydraulic parameters led to ambiguity in the hydrologic character. Stable isotopes of water were then sampled from the pit lake and adjacent groundwater wells, which unambiguously indicated the lack of an evaporative signature in downgradient groundwater because the groundwater did not plot on a hypothetical mixing line between evaporated pit lake water and observed meteoric recharge. This methodology provided a more effective and more data-driven approach for understanding pit-lake hydrology. Although predictive models are required to quantify reasonable bounds on future conditions, many models contain substantial uncertainty and are not well suited in some environments. Datasets that provide more clear lines of evidence could be collected from existing pit lakes whenever possible to inform water-rock interaction, limnological behavior, and connectivity to adjacent groundwater.

Nevada↗