USGS Science⌕ Search

SEARCH · USGS Science

Results for “Surveying and Mapping”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2006

Geologic Map of the Big Spring Quadrangle, Carter County, Missouri

The bedrock exposed in the Big Spring quadrangle of Missouri comprises Late Cambrian and Early Ordovician aged dolomite, sandstone, and chert. The sedimentary rocks are nearly flat lying except where they are adjacent to faults. The carbonate rocks are karstified, and the area contains numerous sinkholes, springs, caves, and losing streams. This map is one of several being produced under the U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program to provide geologic data applicable to land-use problems in the Ozarks of south-central Missouri. Ongoing and potential industrial and agricultural development in the Ozarks region has presented issues of ground-water quality in karst areas. A national park in this region (Ozark National Scenic Riverways, Missouri) is concerned about the effects of activities in areas outside of their stewardship on the water resources that define the heart of this park. This task applies geologic mapping and karst investigations to address issues surrounding competing land use in south-central Missouri. This task keeps geologists from the USGS associated with the park and allows the park to utilize USGS expertise and aid the NPS on how to effectively use geologic maps for park management. For more information, see: http://geology.er.usgs.gov/eespteam/Karst/index.html

IMAP↗
USGS2006

Geologic Map of the Big Spring Quadrangle, Carter County, Missouri

The bedrock exposed in the Big Spring quadrangle of Missouri comprises Late Cambrian and Early Ordovician aged dolomite, sandstone, and chert. The sedimentary rocks are nearly flat lying except where they are adjacent to faults. The carbonate rocks are karstified, and the area contains numerous sinkholes, springs, caves, and losing streams. This map is one of several being produced under the U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program to provide geologic data applicable to land-use problems in the Ozarks of south-central Missouri. Ongoing and potential industrial and agricultural development in the Ozarks region has presented issues of ground-water quality in karst areas. A national park in this region (Ozark National Scenic Riverways, Missouri) is concerned about the effects of activities in areas outside of their stewardship on the water resources that define the heart of this park. This task applies geologic mapping and karst investigations to address issues surrounding competing land use in south-central Missouri. This task keeps geologists from the USGS associated with the park and allows the park to utilize USGS expertise and aid the NPS on how to effectively use geologic maps for park management. For more information, see: http://geology.er.usgs.gov/eespteam/Karst/index.html

Scientific Investigations Map↗
USGS2006

Bathymetric map of the north part of Great Salt Lake, Utah, 2006

The U.S. Geological Survey, in cooperation with the Utah Department of Natural Resources, Division of Forestry, Fire, and State Lands, collected bathymetric data for the north part of Great Salt Lake during the spring and early summer of 2006 using a single beam, high-definition fathometer and real-time differential global positioning system. Approximately 5.2 million depth readings were collected along more than 765 miles of survey transects for construction of this map. Sound velocities were obtained in conjunction with the bathymetric data to provide time-of-travel corrections to the depth calculations. Data were processed using commercial hydrographic software and exported into a geographic information system (GIS) software for mapping. Due to the shallow nature of the lake and the limitations of the instrumentation, contours above an altitude of 4,194 feet were digitized from existing USGS 1:24,000 source-scale digital line graph data. The Behrens Trench is approximately located. For additional information on methods used to derive the bathymetric contours for this map, please see Baskin, Robert L., 2006, Calculation of area and volume for the North Part of Great Salt Lake, Utah, U.S. Geological Survey Open-File Report OFR–2006–1359

Utah↗
USGS2006

usSEABED: Pacific Coast (California, Oregon, Washington) Offshore Surficial-Sediment Data Release, version 1

Over the past 50 years there has been an explosion in scientific interest, research effort, and information gathered on the geologic sedimentary character of the continental margin of the United States. Data and information from thousands of publications have greatly increased our scientific understanding of the geologic origins of the margin surface but rarely have those data been combined and integrated. This publication is the first release of the Pacific coast data from the usSEABED database. The report contains a compilation of published and unpublished sediment texture and other geologic data about the sea floor from diverse sources. usSEABED is an innovative database system developed to unify assorted data, with the data processed by the dbSEABED system. Examples of maps displaying attributes such as grain size and sediment color are included. This database contains information that is a scientific foundation for the U.S. Geological Survey (USGS) Sea floor Mapping and Benthic Habitats project and the Marine Aggregate Resources and Processes assessment project, and will be useful to the marine science community for other studies of the Pacific coast continental margin. The publication is divided into 10 sections: Home, Introduction, Content, usSEABED (data), dbSEABED (processing), Data Catalog, References, Contacts, Acknowledgments, and Frequently Asked Questions. Use the navigation bar on the left to navigate to specific sections of this report. Underlined topics throughout the publication are links to more information. Links to specific and detailed information on processing and to those to pages outside this report will open in a new browser window.

California, Oregon, Washington↗
USGS2008

Digital Mapping Techniques '07 - Workshop Proceedings

The Digital Mapping Techniques '07 (DMT'07) workshop was attended by 85 technical experts from 49 agencies, universities, and private companies, including representatives from 27 state geological surveys. This year's meeting, the tenth in the annual series, was hosted by the South Carolina Geological Survey, from May 20-23, 2007, on the University of South Carolina campus in Columbia, South Carolina. Each DMT workshop has been coordinated by the U.S. Geological Survey's National Geologic Map Database Project and the Association of American State Geologists (AASG). As in previous year's meetings, the objective was to foster informal discussion and exchange of technical information, principally in order to develop more efficient methods for digital mapping, cartography, GIS analysis, and information management. At this meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, 'publishing' includes Web-based release); 2) field data capture software and techniques, including the use of LIDAR; 3) digital cartographic techniques; 4) migration of digital maps into ArcGIS Geodatabase format; 5) analytical GIS techniques; and 6) continued development of the National Geologic Map Database.

Open-File Report↗
USGS1998

Scenic drive landslide of January-March 1998, La Honda, San Mateo County, California

The small rural town of La Honda, Calif., is an unincorporated region of San Mateo County situated in the Santa Cruz Mountains in the western part of the San Francisco peninsula. Much of the town is underlain by a previously recognized ancient landslide complex. The ancient slide complex covers about 1.0 to 1.25 km2, parts of which have been historically active. This report describes a recent landslide involving part of Scenic Drive, La Honda, that became active in January 1998. This report does not describe other currently active landslides in La Honda, such as the January 1998 slide on lower Recreation Drive, or the history of sliding in the area. This report concerns the principal morphological features we observed and mapped between 11 February and 21 March 1998 on an enlargement of a 1:7500-scale air photo acquired 6 March 1998 and prior to that on a town property-line map, and by laser survey carried out between 26 February and 8 March. The principal objective of this report is to make available the detailed photographic and topographic base maps and associated description of surface morphological features.

Open-File Report↗
USGS2005

Bathymetric map of the south part of Great Salt Lake, Utah, 2005

The U.S. Geological Survey, in cooperation with the Utah Department of Natural Resources, Division of Wildlife Resources, collected bathymetric data for the south part of Great Salt Lake during 2002–04 using a single beam, high-definition fathometer and real-time differential global positioning system. Approximately 7.6 million depth readings were collected along more than 1,050 miles of survey transects for construction of this map. Sound velocities were obtained in conjunction with the bathymetric data to provide time-of-travel corrections to the depth calculations. Data were processed with commercial hydrographic software and exported into geographic information system (GIS) software for mapping. Because of the shallow nature of the lake and the limitations of the instrumentation, contours above an altitude of 4,193 feet were digitized from existing USGS 1:24,000 source-scale digital line graph data. For additional information on methods used to derive the bathymetric contours for this map, please see Baskin, Robert L., 2005, Calculation of area and volume for the south part of Great Salt Lake, Utah, U.S. Geological Survey Open-File Report OFR–2005–1327.

Utah↗
USGS2022

Implementation plan of the National Cooperative Geologic Mapping Program strategy—Great Lakes (Central Lowland and Superior Upland Physiographic Provinces)

Introduction The U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program (NCGMP) has published a strategic plan entitled “Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge”. This plan provides the following vision, mission, and goals for the program for the years 2020–30: Vision: create an integrated, three-dimensional (3D), digital geologic map of the United States. Mission: characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal: focus on geological mapping as a core function of the USGS within the long-term vision and mission of creating a digital geologic map and geologic framework model of the Nation. To achieve the goal outlined in the strategic plan, the NCGMP has developed an Implementation Plan. This Implementation Plan will guide annual reviews of the FEDMAP component (that is, the component of the USGS NCGMP that funds geologic mapping by USGS geologists) of the NCGMP projects described in the plan and the development of the annual FEDMAP prospectus, which will ensure the application of the NCGMP strategy. This publication is part of the Implementation Plan of the NCGMP strategy and addresses the following three major topics: continued development of a consistent National geologic map and database; the major unanswered geologic questions in the region; and the societal concerns associated with these geologic questions, such as hazards, geologic and hydrologic resources, and environmental issues. The regions used in this chapter correspond with physiographic divisions of the United States as defined by Fenneman. Physiographic divisions are delineated on the basis of topography, and to a lesser extent, the geologic structure and history. The physiographic divisions are subdivided into physiographic provinces, and the physiographic provinces are subdivided into physiographic sections. Fenneman’s physiographic divisions of the United States provide a robust and useful spatial organization for delineating large geographic regions of the United States for various scientific and industrial applications.

Great Lakes (Central Lowland and Superior Upland P↗
USGS1995

Locating waterfowl observations on aerial surveys

We modified standard aerial survey data collection to obtain the geographic location for each waterfowl observation on surveys in Alaska during 1987-1993. Using transect navigation with CPS (global positioning system), data recording on continuously running tapes, and a computer data input program, we located observations with an average deviation along transects of 214 m. The method provided flexibility in survey design and data analysis. Although developed for geese nesting near the coast of the Yukon-Kuskokwim Delta, the methods are widely applicable and were used on other waterfowl surveys in Alaska to map distribution and relative abundance of waterfowl. Accurate location data with GIS analysis and display may improve precision and usefulness of data from any aerial transect survey.

Wildlife Society Bulletin↗
USGS2007

Progress in the development of shallow-water mapping systems

The USGS (US Geological Survey) Coastal and Marine Geology has deployed an advance autonomous shallow-draft robotic vehicle, Iris, for shallow-water mapping in Apalachicola Bay, Florida. The vehicle incorporates a side scan sonar system, seismic-reflection profiler, single-beam echosounder, and global positioning system (GPS) navigation. It is equipped with an onboard microprocessor-based motor controller, delivering signals for speed and steering to hull-mounted brushless direct-current thrusters. An onboard motion sensor in the Sea Robotics vehicle control system enclosure has been integrated in the vehicle to measure the vehicle heave, pitch, roll, and heading. Three water-tight enclosures are mounted along the vehicle axis for the Edgetech computer and electronics system including the Sea Robotics computer, a control and wireless communications system, and a Thales ZXW real-time kinematic (RTK) GPS receiver. The vehicle has resulted in producing high-quality seismic reflection and side scan sonar data, which will help in developing the baseline oyster habitat maps.

Sea Technology↗
USGS2020

GeMS (Geologic Map Schema)—A standard format for the digital publication of geologic maps

Introduction This report describes and defines GeMS (for Ge ologic M ap S chema), a new standardized database schema—that is, a database design—for the digital publication of geologic maps. It originally was intended for geologic mapping funded by the National Cooperative Geologic Mapping Program of the U.S. Geological Survey, but its use can be extended to other programs and agencies as well. It is intended to bridge the gap between traditional geologic mapping and GIS communities at an operational level. GeMS provides for the encoding in digital form of the content contained in individual geologic maps published by the U.S. Geological Survey and by state geological surveys. The design is focused on the publication, transfer, and archiving of map data and less on the creation of map data, the visual representation of map data, or the compilation of data from many different map sources. Although GeMS is designed for a single-map database, it also is intended to provide a stepping stone toward the development of multiple-map databases, in particular the National Geologic Map Database. The database design contained herein will significantly promote that goal. All questions or comments about GeMS should be directed via email to gems@usgs.gov .

Techniques and Methods↗
USGS2015

Crowdsourcing The National Map

Using crowdsourcing techniques, the US Geological Survey’s (USGS) Volunteered Geographic Information (VGI) project known as “The National Map Corps (TNMCorps)” encourages citizen scientists to collect and edit data about man-made structures in an effort to provide accurate and authoritative map data for the USGS National Geospatial Program’s web-based The National Map. VGI is not new to the USGS, but past efforts have been hampered by available technologies. Building on lessons learned, TNMCorps volunteers are successfully editing 10 different structure types in all 50 states as well as Puerto Rico and the US Virgin Islands.

Cartography and Geographic Information Science↗
USGS2009

Digital Mapping Techniques '08: Workshop Proceedings, Moscow, Idaho, May 18-21, 2008

The Digital Mapping Techniques '08 (DMT'08) workshop was attended by more than 100 technical experts from 40 agencies, universities, and private companies, including representatives from 24 State geological surveys. This year's meeting, the twelfth in the annual series, was hosted by the Idaho Geological Survey, from May 18-21, 2008, on the University of Idaho campus in Moscow, Idaho. Each DMT workshop has been coordinated by the U.S. Geological Survey's National Geologic Map Database Project and the Association of American State Geologists (AASG). As in previous years' meetings, the objective was to foster informal discussion and exchange of technical information, principally in order to develop more efficient methods for digital mapping, cartography, GIS analysis, and information management. At this meeting, oral and poster presentations and special discussion sessions emphasized (1) methods for creating and publishing map products (here, "publishing" includes Web-based release); (2) field data capture software and techniques, including the use of LiDAR; (3) digital cartographic techniques; (4) migration of digital maps into ArcGIS Geodatabase format; (5) analytical GIS techniques; and (6) continued development of the National Geologic Map Database.

Open-File Report↗
USGS1992

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1987

Maps showing anomalous copper concentrations in stream sediments and heavy-mineral concentrates from the Ajo and Lukeville 1 degree by 2 degrees quadrangles, Arizona

This map is part of a folio of maps of the Ajo and Lukeville 1 ° x 2° quadrangles, Arizona, prepared under the Conterminous United States Mineral Assessment Program. Other publications in this folio include U.S. Geological Survey Miscellaneous Field Studies Maps MF-1831-A and MF-1831-B and Open-File Reports 82-119, 82–599, and 83–734. Open-File Reports 82-119 and 83–731 constitute the basic data and initial interpretation on which this discussion is predicated.

Arizona↗
USGS1999

Bathymetry of the Republic of the Marshall Islands and vicinity

The bathymetric map of the Republic of the Marshall Islands and vicinity is bounded by a window of latitude 3 to 17 degrees North, longitude 153 to 175 degrees East. The map was compiled from surveys conducted by the USGS, Korean Ocean Research and Development Institute, and published gridded data. In addition to national jurisdictions, island and atoll coastlines are indicated on the map.

Miscellaneous Field Studies Map↗
USGS2003

Publications of the Western Earth Surface Processes Team 2002

The Western Earth Surface Processes Team (WESPT) of the U.S. Geological Survey (USGS) conducts geologic mapping and related topical earth science studies in the western United States. This work is focused on areas where modern geologic maps and associated earth-science data are needed to address key societal and environmental issues such as ground-water quality, landslides and other potential geologic hazards, and land-use decisions. Areas of primary emphasis in 2001 included southern California, the San Francisco Bay region, the Pacific Northwest, and the Las Vegas urban corridor. The team has its headquarters in Menlo Park, California, and maintains smaller field offices at several other locations in the western United States. The results of research conducted by the WESPT are released to the public as a variety of databases, maps, text reports, and abstracts, both through the internal publication system of the USGS and in diverse external publications such as scientific journals and books. This report lists publications of the WESPT released in 2002 as well as additional 1998 and 2001 publications that were not included in the previous list (USGS Open-File Report 00-215, USGS Open-File Report 01-198, and USGS Open-File Report 02-269). Most of the publications listed were authored or coauthored by WESPT staff. The list also includes some publications authored by non-USGS cooperators with the WESPT, as well as some authored by USGS staff outside the WESPT in cooperation with WESPT projects. Several of the publications listed are available on the World Wide Web; for these, URL addresses are provided. Many of these web publications are USGS open-file reports that contain large digital databases of geologic map and related information. Information on ordering USGS publications can be found on the World Wide Web or by calling 1-888-ASK-USGS. The U.S. Geological Survey’s web server for geologic information in the western United States is located at http://geology.wr.usgs.gov. More information is available about the WESPT is available on-line at the team website.

Open-File Report↗