USGS Science⌕ Search

SEARCH · USGS Science

Results for “Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2002

Method of analysis and quality-assurance practices by the U.S. Geological Survey Organic Geochemistry Research Group: Determination of geosmin and methylisoborneol in water using solid-phase microextraction and gas chromatography/mass spectrometry

A method for the determination of two common odor-causing compounds in water, geosmin and 2-methylisoborneol, was modified and verified by the U.S. Geological Survey's Organic Geochemistry Research Group in Lawrence, Kansas. The optimized method involves the extraction of odor-causing compounds from filtered water samples using a divinylbenzene-carboxen-polydimethylsiloxane cross-link coated solid-phase microextraction (SPME) fiber. Detection of the compounds is accomplished using capillary-column gas chromatography/mass spectrometry (GC/MS). Precision and accuracy were demonstrated using reagent-water, surface-water, and ground-water samples. The mean accuracies as percentages of the true compound concentrations from water samples spiked at 10 and 35 nanograms per liter ranged from 60 to 123 percent for geosmin and from 90 to 96 percent for 2-methylisoborneol. Method detection limits were 1.9 nanograms per liter for geosmin and 2.0 nanograms per liter for 2-methylisoborneol in 45-milliliter samples. Typically, concentrations of 30 and 10 nanograms per liter of geosmin and 2-methylisoborneol, respectively, can be detected by the general public. The calibration range for the method is equivalent to concentrations from 5 to 100 nanograms per liter without dilution. The method is valuable for acquiring information about the production and fate of these odor-causing compounds in water.

Open-File Report↗
USGS2003

Paleomagnetism of basaltic lava flows in coreholes ICPP-213, ICPP-214, ICPP-215, and USGS 128 near the Vadose Zone Research Park, Idaho Nuclear Technology and Engineering Center, Idaho National Engineering and Environmental Laboratory, Idaho

A paleomagnetic study was conducted on basalt from 41 lava flows represented in about 2,300 ft of core from coreholes ICPP-213, ICPP-214, ICPP-215, and USGS 128. These wells are in the area of the Idaho Nuclear Technology and Engineering Center (INTEC) Vadose Zone Research Park within the Idaho National Engineering and Environmental Laboratory (INEEL). Paleomagnetic measurements were made on 508 samples from the four coreholes, which are compared to each other, and to surface outcrop paleomagnetic data. In general, subhorizontal lines of correlation exist between sediment layers and between basalt layers in the area of the new percolation ponds. Some of the basalt flows and flow sequences are strongly correlative at different depth intervals and represent important stratigraphic unifying elements. Some units pinch out, or thicken or thin even over short separation distances of about 1,500 ft. A more distant correlation of more than 1 mile to corehole USGS 128 is possible for several of the basalt flows, but at greater depth. This is probably due to the broad subsidence of the eastern Snake River Plain centered along its topographic axis located to the south of INEEL. This study shows this most clearly in the oldest portions of the cored sections that have differentially subsided the greatest amount.

Idaho↗
USGS2004

Direct current resistivity profiling to study distribution of water in the unsaturated zone near the Amargosa Desert Research Site, Nevada

In order to study the distribution of water in the unsaturated zone and potential for ground-water recharge near the Amargosa Desert Research Site south of Beatty, Nevada, the U.S. Geological Survey collected direct-current resistivity measurements along three profiles in May 2003 using an eight-channel resistivity imaging system. Resistivity data were collected along profiles across the ADRS, across a poorly incised (distributary) channel system of the Amargosa River southwest of the ADRS, and across a well-incised flood plain of the Amargosa River northwest of the ADRS. This report describes results of an initial investigation to estimate the distribution of water in the unsaturated zone and to evaluate the shallow subsurface stratigraphy near the ADRS. The geophysical method of dc resistivity was employed by using automated data collection with numerous electrodes. "Cross sections" of resistivity, produced by using an inversion algorithm on the field data, at the three field sites are presented and interpreted.

Nevada↗
USGS2006

Reconnaissance investigation of Caribbean extreme wave deposits — Preliminary observations, interpretations, and research directions

This report presents an overview of preliminary geological investigations and recommended future research activities in the Caribbean region pertaining to coastal hazards with an emphasis on establishing tsunami risk for U.S. territories. Fieldwork was conducted in March 2006 on the islands of Bonaire, Puerto Rico, and Guadeloupe to evaluate the stratigraphic records of extreme wave deposits as possible indicators of paleotsunami recurrence. Morphological, sedimentological, and stratigraphic evidence indicate that shore-parallel coral rubble deposits composed of coarse clasts and sand that are 10s of meters wide and several meters thick are depositional complexes that have accumulated for a few centuries or millennia, and are not entirely the result of one or a few tsunamis as previously reported. The origins of boulder fields on elevated rock platforms of the Caribbean islands are more complicated than the origins of ridge complexes because boulder fields can be constructed by either storm waves or tsunamis. What is needed now for more conclusive interpretations is a systematic sedimentological approach to deposit analysis and a set of criteria for distinguishing between coarse clast storm and tsunami deposits. Assembling more field data from other Caribbean islands, analyzing stratigraphic deposits on Puerto Rico and Bonaire, and investigating boulder field deposits resulting from a historical tsunami can accomplish this. Also needed are improved sediment transport models for coarse clasts that can be used to estimate the competence and capacity of tsunamis and storms waves and to determine whether a deposit likely was created by a tsunami or extreme storm. Improved models may also be useful for reconstructing the magnitude of extreme wave events.

Puerto Rico↗
USGS2007

The role of aeolian sediment in the preservation of archaeological sites in the Colorado River corridor, Grand Canyon, Arizona: Final report on research activities, 2003-2006

This report summarizes a three-year study of aeolian sedimentary processes in the Colorado River corridor, Grand Canyon, Arizona, and discusses the relevance of those processes to the preservation of archaeological sites. Findings are based upon detailed sedimentary and geomorphic investigations conducted in three areas of the river corridor, continuous measurements of wind, precipitation, and aeolian sediment transport at six locations for up to 26 months, short-term field study at 35 other sites, examination of historical aerial photographs, and review of data collected and analyzed by previous studies. Detailed results of this study, which involved collaboration with scientists at the Grand Canyon Monitoring and Research Center, National Park Service, Northern Arizona University, the Hopi Tribe, and GeoArch, Inc., have been published previously in topical USGS Open-File Reports (Draut and Rubin, 2005, 2006), a USGS Scientific Investigations Report (Draut and others, 2005), and will be discussed in two forthcoming journal articles. This report serves as an overview of the results and contains new conclusions regarding aeolian sedimentary processes in the Colorado River Ecosystem and their relevance to many archaeological sites.

Arizona↗
USGS2007

Initial Everglades Depth Estimation Network (EDEN) digital elevation model research and development

The Everglades Depth Estimation Network (EDEN) offers a consistent and documented dataset that can be used to guide large-scale field operations, to integrate hydrologic and ecological responses, and to support biological and ecological assessments that measure ecosystem responses to the Comprehensive Everglades Restoration Plan (Telis, 2006). To produce historic and near-real time maps of water depths, the EDEN requires a system-wide digital elevation model (DEM) of the ground surface. Accurate Everglades wetland ground surface elevation data were non-existent before the U.S. Geological Survey (USGS) undertook the collection of highly accurate surface elevations at the regional scale. These form the foundation for EDEN DEM development. This development process is iterative as additional high accuracy elevation data (HAED) are collected, water surfacing algorithms improve, and additional ground-based ancillary data become available. Models are tested using withheld HAED and independently measured water depth data, and by using DEM data in EDEN adaptive management applications. Here the collection of HAED is briefly described before the approach to DEM development and the current EDEN DEM are detailed. Finally future research directions for continued model development, testing, and refinement are provided.

Florida↗
USGS2007

Advances through collaboration: sharing seismic reflection data via the Antarctic Seismic Data Library System for Cooperative Research (SDLS)

The Antarctic Seismic Data Library System for Cooperative Research (SDLS) has served for the past 16 years under the auspices of the Antarctic Treaty (ATCM Recommendation XVI-12) as a role model for collaboration and equitable sharing of Antarctic multichannel seismic reflection (MCS) data for geoscience studies. During this period, collaboration in MCS studies has advanced deciphering the seismic stratigraphy and structure of Antarctica’s continental margin more rapidly than previously. MCS data compilations provided the geologic framework for scientific drilling at several Antarctic locations and for high-resolution seismic and sampling studies to decipher Cenozoic depositional paleoenvironments. The SDLS successes come from cooperation of National Antarctic Programs and individual investigators in “on-time” submissions of their MCS data. Most do, but some do not. The SDLS community has an International Polar Year (IPY) goal of all overdue MCS data being sent to the SDLS by end of IPY. The community science objective is to compile all Antarctic MCS data to derive a unified seismic stratigraphy for the continental margin – a stratigraphy to be used with drilling data to derive Cenozoic circum-Antarctic paleobathymetry maps and local-to-regional scale paleoenvironmental histories.

Open-File Report↗
USGS2008

Retrospective Review of Watershed Characteristics and a Framework for Future Research in the Sarasota Bay Watershed, Florida

The U.S. Geological Survey, in cooperation with the Sarasota Bay Estuary Program conducted a retrospective review of characteristics of the Sarasota Bay watershed in west-central Florida. This report describes watershed characteristics, surface- and ground-water processes, and the environmental setting of the Sarasota Bay watershed. Population growth during the last 50 years is transforming the Sarasota Bay watershed from rural and agriculture to urban and suburban. The transition has resulted in land-use changes that influence surface- and ground-water processes in the watershed. Increased impervious cover decreases recharge to ground water and increases overland runoff and the pollutants carried in the runoff. Soil compaction resulting from agriculture, construction, and recreation activities also decreases recharge to ground water. Conventional approaches to stormwater runoff have involved conveyances and large storage areas. Low-impact development approaches, designed to provide recharge near the precipitation point-of-contact, are being used increasingly in the watershed. Simple pollutant loading models applied to the Sarasota Bay watershed have focused on large-scale processes and pollutant loads determined from empirical values and mean event concentrations. Complex watershed models and more intensive data-collection programs can provide the level of information needed to quantify (1) the effects of lot-scale land practices on runoff, storage, and ground-water recharge, (2) dry and wet season flux of nutrients through atmospheric deposition, (3) changes in partitioning of water and contaminants as urbanization alters predevelopment rainfall-runoff relations, and (4) linkages between watershed models and lot-scale models to evaluate the effect of small-scale changes over the entire Sarasota Bay watershed. As urbanization in the Sarasota Bay watershed continues, focused research on water-resources issues can provide information needed by water-resources managers to ensure the future health of the watershed.

Open-File Report↗
USGS2008

Taming of a wild research well in Yellowstone National Park during November 1992

Much of our current understanding of Yellowstone's geothermal areas comes from research drilling by the USGS during 1967 and 1968. Thirteen wells were drilled in thermal areas around the park. Scientists collected waters and rocks, measured temperatures and pressures and performed other tests to characterize the shallow subsurface at Yellowstone. Most wells were plugged and abandoned, but a few were left open for future scientific tests and sampling. One of those wells, the Y8, was located at Biscuit Basin, 2 miles north of Old Faithful. In November 1992, a valve at the ground surface failed, leading to a blowout, an uncontrolled eruption of steam and hot water. The USGS and Yellowstone National Park worked with a drilling contractor to control the flow and plug the well. The lead scientist, Robert Fournier, used video taken by the drilling contractor, Tonto Services, to create this fascinating 28-minute-long film. It is followed by a short news story by CNN, also from November 1992. Fifteen years later, we felt that the video was of sufficient scientific and historical interest that it was worth publishing as a USGS Open-file report, where it can be accessed into the future. Enjoy!

Open-File Report↗
USGS2009

Progress Report: Stratton Ecological Research Site - An Experimental Approach to Assess Effects of Various Grazing Treatments on Vegetation and Wildlife Communities Across Managed Burns and Habitat Controls

Understanding how management practices affect wildlife is fundamental to wise decisions for conservation of public lands. Prescribed fire and grazing timing are two management tools frequently used within publicly owned sagebrush ecosystems. We conducted a variety of surveys in order to assess the impacts of grazing timing strategies (early summer before peak green-up, mid-summer at peak green-up, and late summer after peak green-up) in conjunction with prescribed fire on avian and small mammal populations in a high-elevation sagebrush ecosystem. Avian surveys resulted in a large detection sample size for three bird species: Brewer's sparrow (Spizella breweri), horned lark (Eremophila alpestris), and vesper sparrow (Pooecetes gramineus). Brewer's sparrows had the lowest number of detections within the mid-summer grazing treatment compared to early and late summer grazing treatments, while horned larks and vesper sparrows had higher detection frequencies within the late summer grazing treatment. Summer and fall sage-grouse (Centrocercus urophasianus) pellet counts revealed that the greatest over-winter and over-summer use by sage-grouse occurred within the early summer grazing treatment with minimal use of burn treatment areas across all grazing treatments. Deer-mice (Peromyscus maniculatus) represented approximately 90 percent of small mammals captured and were most prevalent within the mid-summer grazing treatment. Sagebrush cover was greatest within the mid-summer grazing treatment. We monitored 50 and 103 nests in 2007 and 2008, respectively. The apparent success rate for shrub-obligate nesting species was 58 percent in 2007 and 63 percent in 2008. This research will support management of sagebrush ecosystems by providing public land managers with direct comparisons of wildlife response to management regimes.

Open-File Report↗
USGS2009

Research Implementation and Quality Assurance Project Plan: An Evaluation of Hyperspectral Remote Sensing Technologies for the Detection of Fugitive Contamination at Selected Superfund Hazardous Waste Sites

This project is a research collaboration between the U.S. Environmental Protection Agency (EPA) Office of Inspector General (OIG) and the U.S. Geological Survey (USGS) Eastern Geographic Science Center (EGSC), for the purpose of evaluating the utility of hyperspectral remote sensing technology for post-closure monitoring of residual contamination at delisted and closed hazardous waste sites as defined under the Comprehensive Environmental Response Compensation and Liability Act [CERCLA (also known as 'Superfund')] of 1980 and the Superfund Amendments and Reauthorization Act (SARA) of 1986.

Open-File Report↗
USGS2009

Experimental Advanced Airborne Research Lidar (EAARL) Data Processing Manual

The Experimental Advanced Airborne Research Lidar (EAARL) is an example of a Light Detection and Ranging (Lidar) system that utilizes a blue-green wavelength (532 nanometers) to determine the distance to an object. The distance is determined by recording the travel time of a transmitted pulse at the speed of light (fig. 1). This system uses raster laser scanning with full-waveform (multi-peak) resolving capabilities to measure submerged topography and adjacent coastal land elevations simultaneously (Nayegandhi and others, 2009). This document reviews procedures for the post-processing of EAARL data using the custom-built Airborne Lidar Processing System (ALPS). ALPS software was developed in an open-source programming environment operated on a Linux platform. It has the ability to combine the laser return backscatter digitized at 1-nanosecond intervals with aircraft positioning information. This solution enables the exploration and processing of the EAARL data in an interactive or batch mode. ALPS also includes modules for the creation of bare earth, canopy-top, and submerged topography Digital Elevation Models (DEMs). The EAARL system uses an Earth-centered coordinate and reference system that removes the necessity to reference submerged topography data relative to water level or tide gages (Nayegandhi and others, 2006). The EAARL system can be mounted in an array of small twin-engine aircraft that operate at 300 meters above ground level (AGL) at a speed of 60 meters per second (117 knots). While other systems strive to maximize operational depth limits, EAARL has a narrow transmit beam and receiver field of view (1.5 to 2 milliradians), which improves the depth-measurement accuracy in shallow, clear water but limits the maximum depth to about 1.5 Secchi disk depth (~20 meters) in clear water. The laser transmitter [Continuum EPO-5000 yttrium aluminum garnet (YAG)] produces up to 5,000 short-duration (1.2 nanosecond), low-power (70 microjoules) pulses each second. Each pulse is focused into an illumination area that has a radius of about 20 centimeters on the ground. The pulse-repetition frequency of the EAARL transmitter varies along each across-track scan to produce equal cross-track sample spacing and near uniform density (Nayegandhi and others, 2006). Targets can have varying physical and optical characteristics that cause extreme fluctuations in laser backscatter complexity and signal strength. To accommodate this dynamic range, EAARL has the real-time ability to detect, capture, and automatically adapt to each laser return backscatter. The backscattered energy is collected by an array of four high-speed waveform digitizers connected to an array of four sub-nanosecond photodetectors. Each of the four photodetectors receives a finite range of the returning laser backscatter photons. The most sensitive channel receives 90% of the photons, the least sensitive receives 0.9%, and the middle channel receives 9% (Wright and Brock, 2002). The fourth channel is available for detection but is not currently being utilized. All four channels are digitized simultaneously into 65,536 samples for every laser pulse. Receiver optics consists of a 15-centimeter-diameter dielectric-coated Newtonian telescope, a computer-driven raster scanning mirror oscillating at 12.5 hertz (25 rasters per second), and an array of sub-nanosecond photodetectors. The signal emitted by the pulsed laser transmitter is amplified as backscatter by the optical telescope receiver. The photomultiplier tube (PMT) then converts the optical energy into electrical impulses (Nayegandhi and others, 2006). In addition to the full-waveform resolving laser, the EAARL sensor suite includes a down-looking 70-centimeter-resolution Red-Green-Blue (RGB) digital network camera, a high-resolution color infrared (CIR) multispectral camera (14-centimeter-resolution), two precision dual-frequency kinematic carrier-phase global positioning system (GPS) receivers, and an

Open-File Report↗
USGS2010

Compilation of Water-Resources Data and Hydrogeologic Setting for the Allison Woods Research Station in Iredell County, North Carolina, 2005-2008

Water-resources data were collected to describe the hydrologic conditions at the Allison Woods research station near Statesville, North Carolina, in the Piedmont Physiographic Province of North Carolina. Data collected by the U.S. Geological Survey and the North Carolina Department of Environment and Natural Resources, Division of Water Quality, from April 2005 through September 2008 are presented in this report. Data presented include well-construction characteristics and periodic groundwater-level measurements for 29 wells, borehole geophysical logs for 8 wells, hourly groundwater-level measurements for 5 wells, continuous water-quality measurements for 3 wells, periodic water-quality samples for 12 wells and 1 surface-water station, slug-test results for 11 wells, and shallow groundwater-flow maps. In addition, the geology and hydrogeology at the site are summarized.

North Carolina↗
USGS2011

Coulomb 3.3 Graphic-rich deformation and stress-change software for earthquake, tectonic, and volcano research and teaching-user guide

Coulomb is intended both for publication-directed research and for college and graduate school classroom instruction. We believe that one learns best when one can see the most and can explore alternatives quickly. So the principal feature of Coulomb is ease of input, rapid interactive modification, and intuitive visualization of the results. The program has menus and check-items, and dialogue boxes to ease operation. The internal graphics are suitable for publication, and can be easily imported into Illustrator, GMT, Google Earth, or Flash for further enhancements. Coulomb is designed to let one calculate static displacements, strains, and stresses at any depth caused by fault slip, magmatic intrusion, or dike expansion/contraction. One can calculate static displacements (on a surface or at GPS stations), strains, and stresses caused by fault slip, magmatic intrusion, or dike expansion. Problems, such as how an earthquake promotes or inhibits failure on nearby faults, or how fault slip or dike expansion will compress a nearby magma chamber, are germane to Coulomb. Geologic deformation associated with strike-slip faults, normal faults, or fault-bend folds is also a useful application. Calculations are made in an elastic halfspace with uniform isotropic elastic properties following Okada (1992)-see list of key papers in section 1.9. There is substantial evidence to support the hypothesis that faults interact by the transfer of stress, both on the time scales of earthquake sequences and aftershocks and on longer time scales associated with the interevent time of the largest shocks that occur in a given region. There is also evidence that faults and magmatic systems interact as well, and that static stress changes influence intrusions and eruptions. Processes not included in Coulomb are also important, such as dynamic stresses, pore-fluid diffusion, and viscoelastic rebound. Further, elastic stiffness differences between basins and crustal layering modify the stresses in comparison to the elastic halfspace implemented in Coulomb. Nevertheless, we believe that a simple tool that permits exploration of a key component of earthquake interaction has great value for understanding and discovery. To download the software (a MATLAB application) and tutorial files, please go to http://www.coulombstress.org

Open-File Report↗
USGS2011

Loch Vale watershed long-term ecological research and monitoring program quality assurance report, 2003-09

The Loch Vale watershed project is a long-term research and monitoring program located in Rocky Mountain National Park that addresses watershed-scale ecosystem processes, particularly as they respond to atmospheric deposition and climate variability. Measurements of precipitation depth, precipitation chemistry, discharge, and surface-water quality are made within the watershed and elsewhere in Rocky Mountain National Park. As data collected for the program are used by resource managers, scientists, policy makers, and students, it is important that all data collected in Loch Vale watershed meet high standards of quality. In this report, data quality was evaluated for precipitation, discharge, and surface-water chemistry measurements collected during 2003-09. Equipment upgrades were made at the Loch Vale National Atmospheric Deposition Program monitoring site to improve precipitation measurements and evaluate variability in precipitation depth and chemistry. Additional solar panels and batteries have been installed to improve the power supply, and data completeness, at the NADP site. As a result of equipment malfunction, discharge data for the Loch Outlet were estimated from October 18, 2005, to August 17, 2006. Quality-assurance results indicate that more than 98 percent of all surface-water chemistry measurements were accurate and precise. Records that did not meet quality criteria were removed from the database. Measurements of precipitation depth, precipitation chemistry, discharge, and surface-water quality were all sufficiently complete and consistent to support project data needs.

Colorado↗
USGS2011

Quality assurance and quality control of geochemical data—A primer for the research scientist

Geochemistry is a constantly expanding science. More and more, scientists are employing geochemical tools to help answer questions about the Earth and earth system processes. Scientists may assume that the responsibility of examining and assessing the quality of the geochemical data they generate is not theirs but rather that of the analytical laboratories to which their samples have been submitted. This assumption may be partially based on knowledge about internal and external quality assurance and quality control (QA/QC) programs in which analytical laboratories typically participate. Or there may be a perceived lack of time or resources to adequately examine data quality. Regardless of the reason, the lack of QA/QC protocols can lead to the generation and publication of erroneous data. Because the interpretations drawn from the data are primary products to U.S. Geological Survey (USGS) stakeholders, the consequences of publishing erroneous results can be significant. The principal investigator of a scientific study ultimately is responsible for the quality and interpretation of the project's findings, and thus must also play a role in the understanding, implementation, and presentation of QA/QC information about the data. Although occasionally ignored, QA/QC protocols apply not only to procedures in the laboratory but also in the initial planning of a research study and throughout the life of the project. Many of the tenets of developing a sound QA/QC program or protocols also parallel the core concepts of developing a good study: What is the main objective of the study? Will the methods selected provide data of enough resolution to answer the hypothesis? How should samples be collected? Are there known or unknown artifacts or contamination sources in the sampling and analysis methods? Assessing data quality requires communication between the scientists responsible for designing the study and those collecting samples, analyzing samples, treating data, and interpreting results. This primer has been developed to provide basic information and guidance about developing QA/QC protocols for geochemical studies. It is not intended to be a comprehensive guide but rather an introduction to key concepts tied to a list of relevant references for further reading. The guidelines are presented in stepwise order beginning with presampling considerations and continuing through final data interpretation. The goal of this primer is to outline basic QA/QC practices that scientists can use before, during, and after chemical analysis to ensure the validity of the data they collect with the goal of providing defendable results and conclusions.

Open-File Report↗
USGS2015

Surface and subsurface microgravity data in the vicinity of Sanford Underground Research Facility, Lead, South Dakota

Absolute gravity data were collected at 32 stations in the vicinity of the Sanford Underground Research Facility from 2007 through 2014 for the purpose of monitoring groundwater storage change during dewatering of the former Homestake gold mine in the Black Hills of South Dakota, the largest and deepest underground mine in North America. Eight underground stations are at depths from 300 feet below land surface to 4,850 feet below land surface. Surface stations were located using Global Positioning System observations, and subsurface stations were located on the basis of maps constructed from survey measurements made while the mine was in operation. Gravity varies widely at many stations; however, no consistent temporal trends are present across all stations during the 7-year period of data collection.

South Dakota↗
USGS2016

Soil data for a vegetation gradient located at Bonanza Creek Long Term Ecological Research Site, interior Alaska

Boreal soils play an important role in the global carbon cycle owing to the large amount of carbon stored within this northern region. To understand how carbon and nitrogen storage varied among different ecosystems, a vegetation gradient was established in the Bonanza Creek Long Term Ecological Research (LTER) site, located in interior Alaska. The ecosystems represented are a black spruce ( Picea mariana )–feather moss (for example, Hylocomium sp.) forest ecosystem, a shrub-dominated ecosystem, a tussock-grass-dominated ecosystem, a sedge-dominated ecosystem, and a rich fen ecosystem. Here, we report the physical, chemical, and descriptive properties for the soil cores collected at these sites. These data have been used to calculate carbon and nitrogen accumulation rates on a long-term (decadal and century) basis (Manies and others, in press).

Open-File Report↗