SEARCH · USGS Science

Results for “Photogrammetric Engineering and Remote Sensing (PE&RS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 39Linked to original sources

USGS2025

Estimated ultimate recovery (EUR) Prediction for Eagle Ford Shale using integrated datasets and artificial neural networks

The estimated ultimate recovery (EUR) is an important parameter for forecasting oil and gas production and informing decisions regarding field development strategies. In this study, we combined site-specific geologic, completion, and operational parameters with the predictive capabilities of machine learning (ML) models to predict EURs of the wells for the Eagle Ford Marl Continuous Oil Assessment Unit. We developed an extensive dataset of wells that have produced from the lower and upper Eagle Ford Shale intervals and reduced the model complexity using principal component analysis. We tested the ML models and estimated the sensitivities of ML-predicted EURs to changes in the values of different input variables. The results of applying the optimized ML model to the Eagle Ford suggest that the approach developed in this study could be promising. The ML estimates of the EURs fit the DCA-based values with an R 2 ~ 0.9 and a mean absolute error of ~36 × 10 3 bbl. In the lower Eagle Ford Shale, the EUR estimates were found to be most sensitive to changes in porosity, net thickness of the interval, clay volume, and the API gravity of the oil; and that in the upper Eagle Ford Shale they were most sensitive to changes in the total organic carbon and water saturation, which suggests that it could be important to consider these parameters in assessing these intervals or close analogs.

Louisiana, Mississippi, Texas↗

USGS2024

Cross section N–N' through the Valley and Ridge province of the southern Appalachian basin, from Greene County, west-central Alabama, to Bibb County, central Alabama

Introduction Geologic cross section N–N′ is the sixth in a series of geologic cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section N–N′ provides a regional view of the structural and stratigraphic framework of the Appalachian basin in the Valley and Ridge province in western and central Alabama; it spans approximately 69 miles (mi) (111 kilometers [km]). This geologic cross section is a companion to geologic cross sections E–E′ , D–D′ , C–C′ , I–I′ , and A–A′ that are located approximately 350 to 550 mi (563 to 885 km) to the northeast. Cross section N–N' complements earlier geologic cross sections through the Alabama part of the Appalachian basin. Although some of the other cross sections show more structural and stratigraphic detail, they are of more limited extent geographically and stratigraphically. Cross section N–N′ contains information that is useful for evaluating energy resources in the Appalachian basin. Although the Appalachian basin petroleum systems are not shown on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and petroleum migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on what is shown on the cross section. In addition, cross section N–N′ may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Alabama↗

USGS2026

Distributed volcanic fields—Patterns, products, processes, and plumbing

Distributed volcanic fields—also referred to as “monogenetic fields” or simply “volcanic fields”—are found on every continent, on the seafloors, and in every tectonic setting on Earth. Yet, our understanding of what constitutes a distributed volcanic field, and our knowledge of the common products, spatiotemporal patterns in activity, and plumbing systems of these fields, are commonly poor and (or) debated. Here we provide an overview of the current understanding of distributed volcanic fields (DVFs) through review and compilation of published data, with an emphasis on understanding the characteristics of fields that are essential to prepare for future hazardous volcanic activity. Distributed fields can erupt restricted to variable magma compositions. Activity in these fields produces nearly all types of volcanoes, including scoria and spatter cones, maars, low shields, lava fields, stratovolcanoes, and calderas, but monogenetic volcanoes are the defining characteristic of DVFs. The number of vents and lifespans of DVFs vary greatly; vent numbers range from 2 to greater than 1,000, and fields can remain active for 150,000 to 10 million years. Some characteristics of DVFs appear field dependent. Although the volumes of single monogenetic eruptions within DVFs globally are variable (from less than 0.1 to a few cubic kilometers), each field may have a characteristic range in eruption volumes. Eruptions within distributed volcanic fields can have a random distribution and timing, but spatial and (or) temporal vent clustering and alignment are common, and eruptions may be time or volume predictable. Average eruption recurrence intervals in DVFs span over an order of magnitude, from less than 3 to greater than 100 thousand years. Exposures of the shallow portions of older systems reveal that many magma batches end their ascent before reaching the surface, with some dikes stopping within only meters of the surface. Petrologic insights into the deeper plumbing systems of DVF volcanoes indicate variable depths of magma crystallization and (or) stalling, and that magma transport and storage systems may be unique to a particular DVF and its underlying crustal structure. Both seismic and petrologic data for mafic DVF eruptions corroborate intrusions of magma into storage systems in the months to years before eruption, as well as variable ascent rates through the crust (days to weeks). Few distributed fields are closely monitored, as they erupt infrequently, but these observations imply that the amount of time available to install monitoring instrumentation after the first felt seismicity may be short, as precursory activity is frequently on the order of days to months for modern DVF eruptions. Satellite-based geodesy may provide useful warning in such cases. This chapter concludes with outstanding questions and areas for future research that will aid in our understanding and preparedness for future DVF eruptions.

Professional Paper↗

USGS2024

The geometry of fault reactivation and uplift along the central part of the Maacama fault zone, northern California Coast Ranges (USA)

Fault reactivation of bedrock structures in active fault zones influences stress state and earthquake rupture phenomena through the introduction of weak slip surfaces that impact fault zone geometry and width. Yet, geometric relationships between modern faults and older reactivated faults are difficult to quantify in rocks that have experienced multiple deformation episodes. We used new geologic mapping, geomorphic tools, and structural modeling to quantify rock uplift and subsurface fault geometry of the central part of the Maacama Fault Zone near Ukiah, California, USA, and the surrounding area. Results suggest that the northern Mayacamas Mountains are in a tectonically driven disequilibrium, with differential rock uplift focused on the western side of the range. Steeply east-dipping fault surfaces and splays characterize the geometry of the Maacama Fault Zone. We mapped two newly identified faults to the east of the main Maacama Fault, the Cow Mountain–Mill Creek Fault, and Willow Creek Fault, which align with a moderately east-dipping cluster of microseismicity between 4–10 km depth beneath the Mayacamas Mountains. Static stress modeling on the Maacama Fault Zone and newly identified faults to the east quantify slip tendency values of 0.5–0.4, which suggests that the faults are moderately to poorly suited for slip in the modern stress field and may be weak. We infer that modern uplift is driven by oblique reverse, up-to-the-east, dip-slip motion on the reactivated Cenozoic Cow Mountain–Mill Creek and Willow Creek Faults as material is advected through a restraining bend on the Maacama Fault. This study shows that reactivated bedrock faults increase the fault zone width and introduce fault surfaces that contribute a component of vertical deformation and uplift in major strike-slip fault zones. Deformation is accommodated on an interconnected network of new and reactivated faults that delineate a complex seismic hazard.

California↗

USGS1999

Estimation of magnitude and frequency of floods for streams in Puerto Rico: New empirical models

Flood-peak discharges and frequencies are presented for 57 gaged sites in Puerto Rico for recurrence intervals ranging from 2 to 500 years. The log-Pearson Type III distribution, the methodology recommended by the United States Interagency Committee on Water Data, was used to determine the magnitude and frequency of floods at the gaged sites having 10 to 43 years of record. A technique is presented for estimating flood-peak discharges at recurrence intervals ranging from 2 to 500 years for unregulated streams in Puerto Rico with contributing drainage areas ranging from 0.83 to 208 square miles. Loglinear multiple regression analyses, using climatic and basin characteristics and peak-discharge data from the 57 gaged sites, were used to construct regression equations to transfer the magnitude and frequency information from gaged to ungaged sites. The equations have contributing drainage area, depth-to-rock, and mean annual rainfall as the basin and climatic characteristics in estimating flood peak discharges. Examples are given to show a step-by-step procedure in calculating a 100-year flood at a gaged site, an ungaged site, a site near a gaged location, and a site between two gaged sites.

Puerto Rico↗

USGS2023

3D Dynamic rupture modeling of the 6 February 2023, Kahramanmaraş, Turkey Mw 7.8 and 7.7 earthquake doublet using early observations

The 2023 Turkey earthquake sequence involved unexpected ruptures across numerous fault segments. We present 3D dynamic rupture simulations to illuminate the complex dynamics of the earthquake doublet. Our models are constrained by observations available within days of the sequence and deliver timely, mechanically consistent explanations of the unforeseen rupture paths, diverse rupture speeds, multiple slip episodes, heterogeneous fault offsets, locally strong shaking, and fault system interactions. Our simulations link both earthquakes, matching geodetic and seismic observations and reconciling regional seismotectonics, rupture dynamics, and ground motions of a fault system represented by 10 curved dipping segments and embedded in a heterogeneous stress field. The M w 7.8 earthquake features delayed backward branching from a steeply branching splay fault, not requiring supershear speeds. The asymmetrical dynamics of the distinct, bilateral M w 7.7 earthquake are explained by heterogeneous fault strength, prestress orientation, fracture energy, and static stress changes from the previous earthquake. Our models explain the northward deviation of its eastern rupture and the minimal slip observed on the Sürgü fault. 3D dynamic rupture scenarios can elucidate unexpected observations shortly after major earthquakes, providing timely insights for data‐driven analysis and hazard assessment toward a comprehensive, physically consistent understanding of the mechanics of multifault systems.

The Seismic Record↗

USGS2026

High-resolution magnetic survey using an unoccupied aerial vehicle to constrain buried lava flow geometry, volume, and eruptive history of Little Cones, Crater Flat, Nevada

Magnetic surveys are an important tool used to augment geologic mapping in distributed volcanic fields. Using magnetic anomalies, it is possible to model the geometry of shallowly buried volcanic features, such as conduits, sills, and lava flows. This subsurface mapping is important for understanding eruption dynamics and emplacement of lava flows, and it sometimes reveals buried volcanoes no longer visible at the surface. These data are critical to better interpret the numbers, styles, and magnitudes of eruptions in distributed volcanic fields and their associated volcanic hazards. New advances in unoccupied aerial vehicles (UAVs) offer an attractive middle range of resolution and aerial coverage between ground-based magnetic surveys and aeromagnetic surveys. Here, we present the results of a UAV fluxgate magnetic survey of the Little Cones, Nevada, scoria cones, which have been the target of previous ground and aeromagnetic surveys. The magnetic anomalies at Little Cones are of interest because the surrounding alluvium conceals lava flows that erupted from Little Cones, making it very difficult to understand the volume and morphology of lava flows from geologic mapping alone. Nonlinear inversion of UAV-collected magnetic data were used to model the thickness and morphology of buried Little Cones’ lava flows with higher precision than achieved previously. The sequence of events and calculated flow characteristics are then interpreted. The total volume of Little Cones, including concealed lava flows, is approximately 0.016 cubic kilometer, and the initial sheet flow erupted in less than 24 hours. The findings presented herein demonstrate that UAV-based magnetic surveys are a reliable method of data collection and an efficient alternative to other survey methods, facilitating development of a three-dimensional perspective of distributed volcanic fields.

Nevada↗

USGS2026

Suitability of ground-motion models for seismic hazard assessment in Puerto Rico and the U.S. Virgin Islands

We perform linear mixed-effects analyses with a ground-motion dataset to evaluate how well ground-motion models (GMMs) fit active crustal, subduction interface, and subduction intraslab earthquakes in Puerto Rico and the US Virgin Islands. Most of the GMMs reproduce the spatial variation in peak ground motions with earthquake magnitude and rupture distance but predict ground motions 0.3–1.0 natural log units (35%–270%) greater than observations. Two GMMs developed for Puerto Rico that are based on ground-motion records from mostly magnitude 4–5 earthquakes do not perform as well. We attribute the period-dependent overprediction in observed ground motions to differences between the observed site response and the linear site response in the GMMs. Consequently, we developed region-specific GMMs by adjusting the period-dependent linear site response coefficients and period-dependent constant coefficients to remove most of the bias between predicted ground motions and observations. For the analysis, we compile ground-motion records and process waveforms to build a dataset with 10,127 records at 72 stations from 849 magnitude 4.0–6.4 earthquakes between 1 January 2006 and 31 March 2024. The earthquakes include active crustal, subduction interface, and subduction intraslab events. We evaluate the GMMs using the time-averaged shear wave speed in the top 30 m ( ), which we compile from site surveys and proxy values computed from horizontal to vertical spectral ratios. Site terms exhibit strong consistency across GMMs and crustal and subduction earthquakes, indicating that the linear mixed-effects analysis successfully isolates the effects of local site response. The event terms show little spatial correlation and more substantial variability than in other regions, which we attribute to uncertainties in the earthquake magnitudes. This analysis guides the selection of the GMMs for the 2025 update of the National Seismic Hazard Model for Puerto Rico and the US Virgin Islands.

Puerto Rico, U.S. Virgin Islands↗

USGS2025

Petrogenesis and mineralization potential of spinifex komatiitic basalts in the Bradley Peak greenstone terrane, Wyoming Province

Komatiitic volcanic rocks are important hosts of Ni sulfide mineralization and record early Earth evolution; however, those in the well-studied Archean Wyoming Province have received little attention. Here, we elucidate the timing and petrogenesis of the Bradley Peak komatiitic volcanic rocks using field and textural observations, geochronology, and geochemistry. Detrital and igneous zircon U-Pb ages for two samples from previously undated units support published age determinations, placing the eruption age at 2.72 Ga. Stratigraphy of the volcanic flows was mapped and 36 samples including cumulates, greenschists, and spinifex-textured rocks were collected. Whole-rock geochemistry was used to classify the spinifex-textured samples as Al-undepleted komatiitic basalts (11–17 wt% MgO). Platinum-group element concentrations (n = 25) are like those in global Al-undepleted komatiitic basalts, and PGE/Ti ratios do not indicate the volcanic flows likely host sulfide mineralization. Initial ε Nd values of −0.5 to +4.7 (n = 16), indicate that these lavas were derived from a depleted mantle source and have negligible evolved crust contamination. The primary magma to the komatiitic basalt flows is estimated to have had 19 wt% MgO and be derived from ∼15 to 25 % mantle partial melting at 3–4 GPa. Trace element chemistry and thermodynamic modeling suggest the primary melt assimilated local banded iron formation. Although the Bradley Peak komatiitic basalts do not contain positive evidence of magmatic sulfide deposits, depleted Au in the flows suggests they could be source rocks for nearby orogenic gold deposits.

Wyoming↗

USGS2024

Quality of groundwater used for domestic supply in the eastern Sacramento Valley and adjacent foothills, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the eastern Sacramento Valley and adjacent foothills where more than 25,000 residents are estimated to use privately owned domestic wells. Study results show that inorganic and organic constituents in groundwater were present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 8 and 3 percent, respectively, of the aquifer area used for domestic drinking-water supply (herein, “domestic groundwater resources”; fig. 1). The only inorganic constituent detected above regulatory benchmarks was arsenic. The only organic constituent exceeding regulatory benchmarks was the fumigant 1,2,3-trichloropropane (1,2,3-TCP). Three additional organic constituents—the disinfection by-product chloroform, the gasoline oxygenate methyl tert -butyl ether (MTBE), and the solvent tetrachloroethene (PCE)—were detected at low concentrations below one-tenth of regulatory benchmarks in 34, 10, and 10 percent of domestic groundwater resources, respectively. Total dissolved solids (TDS), iron, and manganese exceeded non-regulatory aesthetic guidelines for drinking water in 5, 10, and 26 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFASs) were detected in 29 percent of domestic groundwater resources,with 5 percent exceeding the recently enacted (April 2024) U.S. Environmental Protection Agency MCLs. Total coliform and enterococci bacteria were detected in 13 and 8 percent of domestic groundwater resources, respectively. Redox sensitive constituents in this study included arsenic, manganese, nitrate, and iron. In the lower elevation portions of the eastern Sacramento Valley study area, reducing conditions in groundwater aquifers promote elevated arsenic, iron, and manganese, and conversely lower concentrations of nitrate. The presence of the volatile organic compound (VOC) 1,2,3-TCP was related to its past history in select agricultural land uses (on orchards or vineyards) in the Sacramento Valley; however, unlike in the San Joaquin Valley where orchards and vineyards are more common, its detection frequency was low (only detected in one well in this study). Chloroform was frequently detected in this study at low levels. Chloroform is a disinfection byproduct commonly found in domestic wells treated by shock chlorination. The solvent PCE is among the most frequently detected VOCs in groundwater, which is primarily related to its long history of use and its persistence in groundwater in oxic conditions. The gasoline oxygenate MTBE was a contaminant introduced to groundwater through atmospheric exchange when it was used as a fuel additive to decrease smog inducing emissions from vehicles. Its occurrence in groundwater at low levels is expected and makes it a potentially useful tracer of relatively recent recharge water being withdrawn from wells. The PFASs are anthropogenic chemicals with hundreds of uses, and they have been incorporated into many different products, processes, and applications worldwide. Like MTBE, the occurrence of PFASs in groundwater may be in part due to atmospheric exchange, but there are several other pathways that contribute PFASs to the environment.

California↗

USGS2026

Modeled groundwater and surface-water interactions surrounding Mobile Bay, Alabama, 2008–15

The U.S. Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council, has used MODFLOW 6 to develop a groundwater-flow model to simulate groundwater and surface-water interactions in the Mobile Bay, Alabama, area. The model results indicated that, on average, groundwater discharge near the coastline is equal to 2.5 percent of the surface water that flows into the bay. The model was also used to determine how changes in recharge, sea level, and groundwater pumping affect groundwater levels and discharge rates. The results indicate that more groundwater discharge occurred in the winter and spring when recharge was higher, sea level was lower, and groundwater pumping was lower than during the summer and fall. Additionally, the amount of emergent groundwater was closely related to sea level; when sea level was higher, there was more area with emergent groundwater. Furthermore, the depth of nonemergent groundwater was related to trends in recharge and pumping. During periods of increased recharge and reduced pumping, a significant portion of the model area exhibited a depth to the water table of less than 1 meter below the land surface. Conversely, during periods of decreased recharge and heightened pumping, much of the model area showed a depth to the water table ranging from 1 to 5 meters.

Alabama, Mississippi↗

USGS2026

Evidence for organic and igneous carbon sources in the Mesoproterozoic Adirondack Highlands graphite district, New York

This study examined the origin of graphite mineralization in the Mesoproterozoic Adirondack Highlands. Flake graphite was mined from the historic mining district around Ticonderoga, New York, USA, from the 1850s to the 1920s. Most of the production and reserves from the district are disseminated graphite from feldspathic quartz schists (e.g., Dixon-American Graphite Co. mine, Faxon property, Flake Graphite Company). Protolith sediments of the schists were deposited in the Trans-Adirondack backarc basin at ca. 1.25 Ga and were metamorphosed to high grade at 1.18–1.15 Ga during the accretionary Shawinigan orogeny and at 1.09–1.02 Ga during the Ottawan phase of the Grenvillian orogeny. Major elements and carbon isotopes of graphite from schists (δ 13 C = −28.1‰ to −5.4‰ relative to Vienna Peedee belemnite) are consistent with derivation from organic carbon in protolith sandstones that devolatilized during metamorphism. Some small mines and prospects in the district mined graphitic calcite marbles and clinopyroxene ± scapolite skarns associated with a pegmatite suite dated by U-Pb in zircon to 1.04–1.01 Ga (e.g., Lead Hill and Crown Point deposits), and rare graphite veins are observed at several deposits. Hydrothermal flake graphite from pegmatites, skarns, and veins are distinct from graphite in schist-hosted deposits and have δ 13 C values that cluster around −7‰ to −5‰, consistent with deposition from igneous CO 2 . Covariation of carbon and oxygen stable isotopes and U-Pb zircon geochronology are not compatible with precipitation from fluids derived from country rock metapelites or marbles. Some graphite districts elsewhere show compelling evidence for remobilization and redeposition of sedimentary-derived carbon as hydrothermal graphite, sometimes as thick veins producing world-class, high-grade deposits. In the Adirondacks, there is evidence for two generations of graphite mineralization with distinct carbon sources: syngenetic graphite with an organic origin in Shawinigan quartz schists and epigenetic graphite with an igneous origin in Ottawan skarns and pegmatites.

New York↗

USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗

USGS2026

Nonstationary demographic state-space models using unreplicated counts for species undergoing environmental stressors

A fundamental task in ecological statistics is to estimate abundance and growth rate distributions from wildlife monitoring data to inform conservation management. Modeling time series of wildlife populations presents a number of challenges from both statistical and ecological perspectives, including discreteness; lack of replication; nonstationarity; and observation, demographic, and other phenomenological processes. Nonstationary dynamics are often exhibited by populations undergoing environmental stressors. Models must account for these characteristics to produce reliable estimates of abundance and trends, yet estimation can be challenging with unreplicated data. We propose nonstationary demographic state-space models using unreplicated counts for populations undergoing environmental stressors. A reduced growth rate model matches the complexity of the unreplicated count data, and a fecundity bound on growth rate distributions allows the separation of processes affecting growth rates like environmental stressors from those affecting abundance external to growth rates like migration. NDSSMs allow for the embedding of nonstationary model components, and we explore the use of changepoints, volatility clustering, and migration processes. We apply the proposed nonstationary models in case studies of herons affected by predator/competitor reestablishment and three bat species affected by a fungal pathogen causing white-nose syndrome. Nonstationary models outperform stationary models and generalized linear mixed effects models according to model scoring and visual inspection of predictions, and provide estimates more consistent with published values. Incorporating migration improves model fit universally, even with approximate one-way immigration, most likely because populations are extirpated, recolonized, and increase multiple-fold over the upper bound set by species fecundity. In addition, estimates of the timing and severity of the environmental stressor differed for models with migration. Including nonstationary and demographic components in a fecundity-bounded growth rate model improves inference and benefits interpretability of hyperparameters. In turn, this adjusts uncertainties in predictions of abundance and growth rates over time, providing the ingredients needed for informed conservation analysis and for directing future monitoring of at-risk species.

Journal of Agricultural, Biological and Environmen↗

USGS2025

Sources of water and salts for the Zuni Salt Lake in west-central New Mexico

The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.

New Mexico↗

USGS1991

Effects of septic-tank effluent on ground-water quality in northern Williamson County and southern Davidson County, Tennessee

An investigation of the potential contamination of ground water from septic tank systems blasted in bedrock in Williamson and Davidson Counties, Tennessee, was conducted during 1988-89. Water samples were collected from domestic and observation wells, springs, and surface-water sites in a residential subdivision in the northern part of Williamson County near Nashville. The subdivision has a high density of septic-tank field lines installed into blasted bedrock Water samples also were collected from a well located in an area of Davidson County where field lines were installed in 5 feet of soil. Samples were analyzed for major inorganic constituents, nutrients, total organic carbon, optical brighteners, and bacteria. Although results of analyses of water samples from wells indicate no effect of septic-tank effluent on ground-water quality at these sites, water from two springs located downgradient from the subdivision had slightly larger concentrations of nitrite plus nitrate (2.2 and 2.7 milligrams per liter N), and much larger concentrations of fecal coliform and fecal streptococci bacteria (2,000 to 3,200 and 700 to 900 colonies per 100 milliliters of sample, respectively), than other wells and springs sampled during 1988. Water from one of these springs contained optical brighteners, which indicates that septic-tank effluent is affecting ground-water quality.

Tennessee↗

USGS2025

Characterizing Meteor Crater impact melts through geochemistry and textural analysis

The U.S. Geological Survey Astrogeology Science Center houses the Meteor Crater sample collection, an assemblage of over 2,500 meters of cuttings from 161 drill holes into Meteor Crater’s rim, flanks, and ejecta blanket. We have utilized this unique collection to study the composition and spatial distribution of impact-generated materials from within the ejecta blanket. Meteor Crater has historically been known to have generated only a relatively small amount of impact melt compared to other terrestrial craters of similar size. A detailed compositional and textural dataset of impact-derived melts from this impact can therefore be a useful asset in improving our understanding of crater formation, and in particular impact melt formation. We have characterized 42 impact-melt particles from Meteor Crater using a scanning electron microscope and an electron microprobe for textural and compositional analysis. We analyzed samples from six drill holes in the ejecta blanket, situated to the northwest, southeast, south, and southwest of the crater (ejecta northeast of the crater is devoid of impact melts). Impact melts were collected from drill cuttings at various depths within the ejecta blanket, ranging from a few centimeters below the surface down to ~6.5 meters. Backscattered electron (BSE) images were acquired for each analyzed impact-melt particle. To characterize the various textures and phases present in each impact melt, we also took many detailed BSE images. Our geochemical analyses include full spectral profiles using energy dispersive X-ray spectrometry and well-calibrated wavelength dispersive spectrometry for a number of phases, including minerals (olivine, pyroxene, and so on), pristine glass, and metallic inclusions. The full dataset is available in ScienceBase as a data release (Gullikson and others, 2024), accessible at https://doi.org/10.5066/P9OGAJ8P . Our goal for this Open-File Report is to provide a summary of this immense dataset, details on data collection, descriptions of the different phases observed within impact-melt particles (both geochemically and texturally), and observable trends.

Arizona↗

USGS2024

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗