USGS Science⌕ Search

SEARCH · USGS Science

Results for “Lithosphere”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

702 records · Page 39Linked to original sources

No correlation between Anderson Reservoir stage level and underlying Calaveras fault seismicity despite calculated differential stress increases

Concerns have been raised that stresses from reservoir impoundment may trigger damaging earthquakes because rate changes have been associated with reservoir impoundment or stage-level changes globally. Here, the idea is tested blindly using Anderson Reservoir, which lies atop the seismically active Calaveras fault. The only knowledge held by the author going into the study was the expectation that reservoir levels change cyclically because of seasonal rainfall. Examination of seismicity rates near the reservoir reveals variability, but no correlation with stage-level changes. Three-dimensional finite-element modeling shows stress changes sufficient for earthquake triggering along the Calaveras fault zone. Since many of the reported cases of induced triggering come from low-strain settings, it is speculated that gradual stressing from stage-level changes in high-strain settings may not be significant. From this study, it can be concluded that reservoirs are not necessarily risky in active tectonic settings.

California↗

Superimposed extension and shortening in the southern Salinas Basin and La Panza Range, California: A guide to Neogene deformation in the Salinian block of the central California Coast Ranges

We synthesized data from geologic maps, wells, seismic-reflection profiles, potential-field interpretations, and low-temperature thermochronology to refine our understanding of late Cenozoic extension and shortening in the Salinian block of the central California Coast Ranges. Data from the La Panza Range and southern Salinas Basin document early to middle Miocene extension, followed by Pliocene and younger shortening after a period of little deformation in the late Miocene. Extension took place on high-angle normal faults that accommodated ∼2% strain at the scale of the ∼50-km-wide Salinian block (oriented perpendicular to the San Andreas fault). Shortening was accommodated by new reverse faults, reactivation of older normal faults, and strike-slip faulting that resulted in a map-view change in the width of the Salinian block. The overall magnitude of shortening was ∼10% strain, roughly 4–5 times greater than the amount of extension. The timing and magnitude of deformation in our study area are comparable to that documented in other Salinian block basins, and we suggest that the entire block deformed in a similar manner over a similar time span. The timing and relative magnitude of extension and shortening may be understood in the context of central Coast Range tectonic boundary conditions linked to rotation of the western Transverse Ranges at the south end of the Salinian block. Older models for Coast Range shortening based on balanced fault-bend fold-style cross sections are a poor approximation of Salinian block deformation, and may lead to mechanically improbable fault geometries that overestimate the amount of shortening.

California↗

Fault geometry and cumulative offsets in the central Coast Ranges, California: Evidence for northward increasing slip along the San Gregorio-San Simeon-Hosgri fault

Estimates of the dip, depth extent, and amount of cumulative displacement along the major faults in the central California Coast Ranges are controversial. We use detailed aeromagnetic data to estimate these parameters for the San Gregorio–San Simeon–Hosgri and other faults. The recently acquired aeromagnetic data provide an areally consistent data set that crosses the onshore-offshore transition without disruption, which is particularly important for the mostly offshore San Gregorio–San Simeon–Hosgri fault. Our modeling, constrained by exposed geology and in some cases, drill-hole and seismic-reflection data, indicates that the San Gregorio–San Simeon–Hosgri and Reliz-Rinconada faults dip steeply throughout the seismogenic crust. Deviations from steep dips may result from local fault interactions, transfer of slip between faults, or overprinting by transpression since the late Miocene. Given that such faults are consistent with predominantly strike-slip displacement, we correlate geophysical anomalies offset by these faults to estimate cumulative displacements. We find a northward increase in right-lateral displacement along the San Gregorio–San Simeon–Hosgri fault that is mimicked by Quaternary slip rates. Although overall slip rates have decreased over the lifetime of the fault, the pattern of slip has not changed. Northward increase in right-lateral displacement is balanced in part by slip added by faults, such as the Reliz-Rinconada, Oceanic–West Huasna, and (speculatively) Santa Ynez River faults to the east.

Lithosphere↗

Laurentian origin for the North Slope of Alaska: Implications for the tectonic evolution of the Arctic

The composite Arctic Alaska–Chukotka terrane plays a central role in tectonic reconstructions of the Arctic. An exotic, non-Laurentian origin of Arctic Alaska–Chukotka has been proposed based on paleobiogeographic faunal affinities and various geochronological constraints from the southwestern portions of the terrane. Here, we report early Paleozoic trilobite and conodont taxa that support a Laurentian origin for the North Slope subterrane of Arctic Alaska, as well as new Neoproterozoic–Cambrian detrital zircon geochronological data, which are both consistent with a Laurentian origin and profoundly different from those derived from similar-aged strata in the southwestern subterranes of Arctic Alaska–Chukotka. The North Slope subterrane is accordingly interpreted as allochthonous with respect to northwestern Laurentia, but it most likely originated farther east along the Canadian Arctic or Atlantic margins. These data demonstrate that construction of the composite Arctic Alaska–Chukotka terrane resulted from juxtaposition of the exotic southwestern fragments of the terrane against the northern margin of Laurentia during protracted Devonian(?)–Carboniferous tectonism.

Lithosphere↗

Two flysch belts having distinctly different provenance suggest no stratigraphic link between the Wrangellia composite terrane and the paleo-Alaskan margin

The provenance of Jurassic to Cretaceous flysch along the northern boundary of the allochthonous Wrangellia composite terrane, exposed from the Lake Clark region of southwest Alaska to the Nutzotin Mountains in eastern Alaska, suggests that the flysch can be divided into two belts having different sources. On the north, the Kahiltna flysch and Kuskokwim Group overlie and were derived from the Farwell and Yukon-Tanana terranes, as well as smaller related terranes that were part of the paleo-Alaskan margin. Paleocurrent indicators for these two units suggest that they derived sediment from the north and west. Sandstones are predominantly lithic wacke that contain abundant quartz grains, lithic rock fragments, and detrital mica, which suggest that these rocks were derived from recycled orogen and arc sources. Conglomerates contain limestone clasts that have fossils matching terranes that made up the paleo-Alaskan margin. In contrast, flysch units on the south overlie and were derived from the Wrangellia composite terrane. Paleocurrent indicators for these units suggest that they derived sediment from the south. Sandstones are predominantly feldspathic wackes that contain abundant plagioclase grains and volcanic rock fragments, which suggest these rocks were derived from an arc. Clast compositions in conglomerate south of the boundary match rock types of the Wrangellia composite terrane. The distributions of detrital zircon ages also differentiate the flysch units. Flysch units on the north average 54% Mesozoic, 14% Paleozoic, and 32% Precambrian detrital zircons, reflecting derivation from the older Yukon-Tanana, Farewell, and other terranes that made up the paleo-Alaskan margin. In comparison, flysch units on the south average 94% Mesozoic, 1% Paleozoic, and 5% Precambrian zircons, which are consistent with derivation from the Mesozoic oceanic magmatic arc rocks in the Wrangellia composite terrane. In particular, the flysch units on the south contain a large proportion of zircons ranging from 135 to 175 Ma, corresponding to the age of the Chitina magmatic arc in the Wrangellia terrane and the plutons of the Peninsular terrane, which are part of the Wrangellia composite terrane. Flysch units on the north do not contain significant numbers of zircons in this age range. The flysch overlying the Wrangellia composite terrane apparently does not contain detritus derived from rocks of the paleo-Alaska margin, and the flysch overlying the paleo-Alaskan margin apparently does not contain detritus derived from the Wrangellia composite terrane. The provenance difference between the two belts helps to constrain the location of the northern boundary of the Wrangellia composite terrane. Geophysical models place a deep, through-going, crustal-scale suture zone in the area between the two flysch belts. The difference in the provenance of the two belts supports this interpretation. The youngest flysch is Late Cretaceous in age, and structural disruption of the flysch units is constrained to the Late Cretaceous, so it appears that the Wrangellia composite terrane was not near the paleo-Alaskan margin until the Late Cretaceous.

Alaska↗

Multisystem dating of modern river detritus from Tajikistan and China: Implications for crustal evolution and exhumation of the Pamir

The Pamir is the western continuation of Tibet and the site of some of the highest mountains on Earth, yet comparatively little is known about its crustal and tectonic evolution and erosional history. Both Tibet and the Pamir are characterized by similar terranes and sutures that can be correlated along strike, although the details of such correlations remain controversial. The erosional history of the Pamir with respect to Tibet is significantly different as well: Most of Tibet has been characterized by internal drainage and low erosion rates since the early Cenozoic; in contrast, the Pamir is externally drained and topographically more rugged, and it has a strongly asymmetric drainage pattern. Here, we report 700 new U-Pb and Lu-Hf isotope determinations and >300 40 Ar/ 39 Ar ages from detrital minerals derived from rivers in China draining the northeastern Pamir and >1000 apatite fission-track (AFT) ages from 12 rivers in Tajikistan and China draining the northeastern, central, and southern Pamir. U-Pb ages from rivers draining the northeastern Pamir are Mesozoic to Proterozoic and show affinity with the Songpan-Ganzi terrane of northern Tibet, whereas rivers draining the central and southern Pamir are mainly Mesozoic and show some affinity with the Qiangtang terrane of central Tibet. The ε Hf values are juvenile, between 15 and −5, for the northeastern Pamir and juvenile to moderately evolved, between 10 and −40, for the central and southern Pamir. Detrital mica 40 Ar/ 39 Ar ages for the northeastern Pamir (eastern drainages) are generally older than ages from the central and southern Pamir (western drainages), indicating younger or lower-magnitude exhumation of the northeastern Pamir compared to the central and southern Pamir. AFT data show strong Miocene–Pliocene signals at the orogen scale, indicating rapid erosion at the regional scale. Despite localized exhumation of the Mustagh-Ata and Kongur-Shan domes, average erosion rates for the northeastern Pamir are up to one order of magnitude lower than erosion rates recorded by the central and southern Pamir. Deeper exhumation of the central and southern Pamir is associated with tectonic exhumation of central Pamir domes. Deeper exhumation coincides with western and asymmetric drainages and with higher precipitation today, suggesting an orographic effect on exhumation. A younging-southward trend of cooling ages may reflect tectonic processes. Overall, cooling ages derived from the Pamir are younger than ages recorded in Tibet, indicating younger and higher magnitudes of erosion in the Pamir.

Pamir Mountains, Tibet↗

Geomorphic evidence for enhanced Pliocene-Quaternary faulting in the northwestern Basin and Range

Mountains in the U.S. Basin and Range Province are similar in form, yet they have different histories of deformation and uplift. Unfortunately, chronicling fault slip with techniques like thermochronology and geodetics can still leave sizable, yet potentially important gaps at Pliocene–Quaternary (∼105–106 yr) time scales. Here, we combine existing geochronology with new geomorphic observations and approaches to investigate the Miocene to Quaternary slip history of active normal faults that are exhuming three footwall ranges in northwestern Nevada: the Pine Forest Range, the Jackson Mountains, and the Santa Rosa Range. We use the National Elevation Dataset (10 m) digital elevation model (DEM) to measure bedrock river profiles and hillslope gradients from these ranges. We observe a prominent suite of channel convexities (knickpoints) that segment the channels into upper reaches with low steepness (mean k sn = ∼182; θ ref = 0.51) and lower, fault-proximal reaches with high steepness (mean k sn = ∼361), with a concomitant increase in hillslope angles of ∼6°–9°. Geologic maps and field-based proxies for rock strength allow us to rule out static causes for the knickpoints and interpret them as transient features triggered by a drop in base level that created ∼20% of the existing relief (∼220 m of ∼1050 m total). We then constrain the timing of base-level change using paleochannel profile reconstructions, catchment-scale volumetric erosion fluxes, and a stream-power–based knickpoint celerity (migration) model. Low-temperature thermochronology data show that faulting began at ca. 11–12 Ma, yet our results estimate knickpoint initiation began in the last 5 Ma and possibly as recently as 0.1 Ma with reasonable migration rates of 0.5–2 mm/yr. We interpret the collective results to be evidence for enhanced Pliocene–Quaternary fault slip that may be related to tectonic reorganization in the American West, although we cannot rule out climate as a contributing mechanism. We propose that similar studies, which remain remarkably rare across the region, be used to further test how robust this Plio–Quaternary landscape signal may be throughout the Great Basin.

U.S. Basin and Range Province↗

Tectonic and sedimentary linkages between the Belt-Purcell basin and southwestern Laurentia during the Mesoproterozoic ca. 1.60-1.40 Ga

Mesoproterozoic sedimentary basins in western North America provide key constraints on pre-Rodinia craton positions and interactions along the western rifted margin of Laurentia. One such basin, the Belt-Purcell basin, extends from southern Idaho into southern British Columbia and contains a >18-km-thick succession of siliciclastic sediment deposited ca. 1.47–1.40 Ga. The ca. 1.47–1.45 Ga lower part of the succession contains abundant distinctive non-Laurentian 1.61–1.50 Ga detrital zircon populations derived from exotic cratonic sources. Contemporaneous metasedimentary successions in the southwestern United States–the Trampas and Yankee Joe basins in Arizona and New Mexico–also contain abundant 1.61–1.50 Ga detrital zircons. Similarities in depositional age and distinctive non-Laurentian detrital zircon populations suggest that both the Belt-Purcell and southwestern successions record sedimentary and tectonic linkages between western Laurentia and one or more cratons including North Australia, South Australia, and (or) East Antarctica. At ca. 1.45 Ga, both the Belt-Purcell and southwest successions underwent major sedimentological changes, with a pronounced shift to Laurentian provenance and the disappearance of the 1.61–1.50 Ga detrital zircon. Upper Belt-Purcell strata contain strongly unimodal ca. 1.73 Ga detrital zircon age populations that match the detrital zircon signature of Paleoproterozoic metasedimentary rocks of the Yavapai province to the south and southeast. We propose that the shift at ca. 1.45 Ga records the onset of orogenesis in southern Laurentia coeval with rifting along its northwestern margin. Bedrock uplift associated with orogenesis and widespread, coeval magmatism caused extensive exhumation and erosion of the Yavapai province ca. 1.45–1.36 Ga, providing a voluminous and areally extensive sediment source–with suitable zircon ages–during upper Belt deposition. This model provides a comprehensive and integrated view of the Mesoproterozoic tectonic evolution of western Laurentia and its position within the supercontinent Columbia as it evolved into Rodinia.

Lithosphere↗

A synthesis of Jurassic and Early Cretaceous crustal evolution along the southern margin of the Arctic Alaska–Chukotka microplate and implications for defining tectonic boundaries active during opening of Arctic Ocean basins

A synthesis of Late Jurassic and Early Cretaceous collision-related metamorphic events in the Arctic Alaska–Chukotka microplate clarifies its likely movement history during opening of the Amerasian and Canada basins. Comprehensive tectonic reconstructions of basin opening have been problematic, in part, because of the large size of the microplate, uncertainties in the location and kinematics of structures bounding the microplate, and lack of information on its internal deformation history. Many reconstructions have treated Arctic Alaska and Chukotka as a single crustal entity largely on the basis of similarities in their Mesozoic structural trends and similar late Proterozoic and early Paleozoic histories. Others have located Chukotka near Siberia during the Triassic and Jurassic, on the basis of detrital zircon age populations, and suggested that it was Arctic Alaska alone that rotated. The Mesozoic metamorphic histories of Arctic Alaska and Chukotka can be used to test the validity of these two approaches. A synthesis of the distribution, character, and timing of metamorphic events reveals substantial differences in the histories of the southern margin of the microplate in Chukotka in comparison to Arctic Alaska and places specific limitations on tectonic reconstructions. During the Late Jurassic and earliest Cretaceous, the Arctic Alaska margin was subducted to the south, while the Chukotka margin was the upper plate of a north-dipping subduction zone or a zone of transpression. An early Aptian blueschist- and greenschist-facies belt records the most profound crustal thickening event in the evolution of the orogen. It may have resulted in thicknesses of 50–60 km and was likely the cause of flexural subsidence in the foredeep of the Brooks Range. This event involved northern Alaska and northeasternmost Chukotka; it did not involve central and western Chukotka. Arctic Alaska and Chukotka evolved separately until the Aptian thickening event, which was likely a result of the rotation of Arctic Alaska into central and western Chukotka. In northeastern Chukotka, the thickened rocks are separated from the relatively little thickened continental crust of the remainder of Chukotka by the oceanic rocks of the Kolyuchin-Mechigmen zone. The zone is a candidate for an Early Cretaceous suture that separated most of Chukotka from northeast Chukotka and Alaska. Albian patterns of magmatism, metamorphism, and deformation in Chukotka and the Seward Peninsula may represent an example of escape tectonics that developed in response to final amalgamation of Chukotka with Eurasia.

Arctic Alaska-Chukotka microplate↗

Detrital zircon geochronology of quartzose metasedimentary rocks from parautochthonous North America, east-central Alaska

We report eight new U-Pb detrital zircon ages for quartzose metasedimentary rocks from four lithotectonic units of parautochthonous North America in east-central Alaska: the Healy schist, Keevy Peak Formation, and Sheep Creek Member of the Totatlanika Schist in the northern Alaska Range, and the Butte assemblage in the northwestern Yukon-Tanana Upland. Excepting 1 of 3 samples from the Healy schist, all have dominant detrital zircon populations of 1.9–1.8 Ga and a subordinate population of 2.7–2.6 Ga. Three zircons from Totatlanika Schist yield the youngest age of ca. 780 Ma. The anomalous Healy schist sample has abundant 1.6–0.9 Ga detrital zircon, as well as populations at 2.0–1.8 Ga and 2.7–2.5 Ga that overlap the ages from the rest of our samples; it has a minimum age population of ca. 1007 Ma. Detrital zircon age populations from all but the anomalous sample are statistically similar to those from (1) other peri-Laurentian units in east-central Alaska; (2) the Snowcap assemblage in Yukon, basement of the allochthonous Yukon-Tanana terrane; (3) Neoproterozoic to Ordovician Laurentian passive margin strata in southern British Columbia, Canada; and (4) Proterozoic Laurentian Sequence C strata of northwestern Canada. Recycling of zircon from the Paleoproterozoic Great Bear magmatic zone in the Wopmay orogen and its Archean precursors could explain both the Precambrian zircon populations and arc trace element signatures of our samples. Zircon from the anomalous Healy schist sample resembles that in Nation River Formation and Adams Argillite in eastern Alaska, suggesting recycling of detritus in those units.

Alaska, British Columbia, Yukon Territory↗

Quantifying rock uplift rates using channel steepness and cosmogenic nuclide–determined erosion rates: Examples from northern and southern Italy

Rock uplift rates can be difficult to measure over 10 3 –10 5 yr time scales. If, however, a landscape approaches steady state, where hillslope erosion and rock uplift rates are steady and locally similar, then it should be possible to quantify rock uplift rates from hillslope erosion rates. Here, we test this prediction by comparing channel steepness index values and 10 Be catchment-averaged erosion rates to well-constrained rock uplift rates in two landscapes in Italy. The first field area is the Romagna Apennines, northern Italy, where rock uplift rates are relatively uniform, between 0.2 and 0.5 mm/yr (regional mean 0.40 ± 0.15 [SE] mm/yr), and have been steady since 0.9 Ma. The second area is the region around northeastern Sicily and the southernmost Italian peninsula, where rock uplift rates are higher and exhibit a strong spatial gradient, from ∼0.7 to ∼1.6 mm/yr (regional mean 1.09 ± 0.13 [SE] mm/yr). In both regions, channel steepness indices and 10 Be erosion rates vary directly with rock uplift rates. Although there is considerable variability in erosion rates, regionally averaged rates in both the northern (0.46 ± 0.04 [SE] mm/yr) and southern (1.21 ± 0.24 [SE] mm/yr) areas accurately measure rock uplift rates. Although channel steepness indices do not quantify rock uplift rates, they are useful for (1) identifying regional patterns of rock uplift, (2) identifying areas where uplift rates might be expected to be uniform, and (3) informing 10 Be sampling strategies. This study demonstrates that, together, channel steepness and hillslope erosion rates can provide a powerful tool for determining rock uplift rates.

Lithosphere↗

Cordilleran subduction initiation: Retro-arc timing and basinal response in the Inyo Mountains, eastern California

Subduction zones drive plate tectonics on Earth, yet subduction initiation and the related upper plate depositional and structural kinematics remain poorly understood because upper plate records are rare and often strongly overprinted by magmatism and deformation. During the late Paleozoic time, Laurentia’s western margin was truncated by a sinistral strike-slip fault that transformed into a subduction zone. Thick Permian strata in the Inyo Mountains of central-eastern California record this transition. Two basins that were separated by a transpressional antiform contain sedimentary lithofacies that record distinct patterns of shoaling and deepening conditions before and during tectonism associated with subduction initiation. Sandstone petrography and lithofacies analysis show that rocks in a southeastern basin are dominated by carbonate grains derived from adjacent carbonate shelves, whereas sandstones in a northwestern basin are predominantly quartzose with likely derivation from distant ergs or underlying strata. Detrital zircon spectra from all but the youngest strata in both basins are typical of Laurentian continent spectra with prominent peaks that indicate ultimate sources in Appalachia, Grenville, Yavapai/Mazatzal, and the Wyoming or Superior cratons. The first Cordilleran arc-derived detrital zircon grains appear in the uppermost strata of the northwestern basin and record Late Permian (ca. 260 Ma) Cordilleran arc magmatism at this approximate latitude, and a possible source area is suggested by geochemical similarities between these detrital zircons and broadly coeval magmatic zircons in the El Paso Mountains to the southwest. Deformation responsible for basin partitioning is consistent with sinistrally oblique contraction in the earliest Permian time. The data presented from the Inyo Mountains shed more light on the nature of Cordilleran subduction initiation and the upper-crustal response to this transition.

California↗

Insights from the Alabama Hills into Mesozoic magmatism and tectonics in eastern California

New zircon U-Pb ages for the Alabama Hills Granite in Owens Valley, eastern California, range from 103 to 102 Ma, nearly 20 Ma older than previously published zircon ages. The data preclude previously implied links between the pluton and the adjacent Late Cretaceous Mount Whitney Intrusive Suite. Geochronologic and isotopic data indicate a connection between the Alabama Hills Granite and leucogranites to the northwest on the Sierra Nevada crest, as well as a pluton to the southeast in the Coso Range. We refer to these units as the Kearsarge plutons. The suite was intruded from 103 to 100.5 Ma with S 87 r / S 86 r i = 0.7045 "> 87 S 87 r / S 86 r i = 0.7045 "> S r / 86 S r i = 0.7045 to 0.7060 and ε N d i = − 2.4 "> ε N d i = − 2.4 to -4.5 and has distinctive enrichments in high field strength, middle, and heavy rare earth elements, as well as negative Eu anomalies and high Y/Sr. We suggest the Alabama Hills block could not have moved more than 10 km dextrally relative to the Sierra Nevada batholith since the Middle Jurassic and is thus a suitable piercing point for offsets across Owens Valley. The Kearsarge plutons, like other markers on either side of Owens Valley, support approximately 65–75 km of dextral offset across the valley. The suite’s location east of other middle Cretaceous suites, coupled with its mantle-like isotope geochemistry, suggests it could represent backarc magmatism, perhaps controlled by preexisting shear zones or fractures.

California↗

Paleogene sedimentary basin development in southern Nevada, USA

The cause of the transition from Mesozoic and early Cenozoic crustal shortening to later extension in the western United States is debated. In many parts of the extant Sevier hinterland, now the Basin and Range Province, the sedimentary sections that provide the most direct record of that transition remain poorly studied and lack meaningful age control. In this paper, we present field characterization supported by U-Pb detrital zircon and 40 Ar/ 39 Ar feldspar ages for ten sections across southern Nevada. We describe a newly identified basin, here named the Fallout Hills basin, which preserves >1.0 km of sedimentary deposits as old as middle Eocene, ca. 48 Ma. Deposition occurred during the 20 m.y. (million years) before the 27.60 ± 0.03 Ma Monotony Tuff blanketed much of south-central Nevada, based on 47.6 Ma and younger detrital zircon maximum depositional ages (MDAs) from near the Pintwater and Spotted Ranges. Elsewhere in southern Nevada, prevolcanic Cenozoic strata commonly form thinner (~100 m), isolated exposures that yield detrital zircon MDAs ≤10 m.y. older than (and in some cases essentially the same age as) the ca. 27–28 Ma ignimbrites that cap the sections. A variable but overall upward-fining facies pattern is observed in both the Fallout Hills basin and the thinner sections. These localized patterns imply topographic changes that are unlikely to reflect plate-scale processes and are not consistent with large-magnitude extension. Instead, variable uplift due to magmatism combined with antecedent topographic relief from thrust faulting and subsequent erosion likely provided accommodation for these deposits.

Nevada↗

Spatiotemporal variations in strain release and seismic rupture in multifault systems: An example from Panamint Valley, southeastern California

Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.

California↗

A comprehensive geologic framework of the National Crustal Model for seismic hazard studies in the conterminous United States

A three-dimensional (3D) geologic framework has been developed for the conterminous United States (U.S.) as part of the U.S. Geological Survey National Crustal Model to enhance seismic hazard modeling. The geologic framework is created from geologic maps and multiple subsurface geologic unit boundaries including the base of the Miocene, Cenozoic, Phanerozoic, and the Mohorovičić discontinuity. Modifications are made to surficial geologic maps to remove discontinuities across state and country borders. The subsurface distribution of rock type and age is extrapolated from the surface, seeded with subsurface geologic information, and constrained by a map of basement geology. The framework provides the basis for estimates of subsurface seismic velocity and density that is needed to improve estimates of earthquake ground shaking and seismic hazard. The present framework greatly expands and updates a previously published 3D geologic framework of the western part of the U.S. that was itself a first-of-its-kind digital 3D portrayal of the nation.

conterminous United States↗

Apatite (U-Th)/He thermochronology from Marsh Creek anticline reconciles Cenozoic and Holocene strain patterns and elucidates the Cenozoic canning displacement zone of Arctic Alaska

The northeastern Brooks Range is a vast fold-thrust belt that records the northernmost expression of Cenozoic deformation in Alaska, likely with complex dynamic linkages to distant tectonic elements. The principal focus of this manuscript is the Marsh Creek anticline (MCA), which is a large and recently active structure within the broader northeastern Brooks Range. The MCA is a complex, polyphase structure mostly buried beneath the Arctic coastal plain. We present apatite (U-Th)/He (AHe) dates from six outcrop samples, all near the structural crest of the anticline, as well as supporting detrital zircon U/Pb (ZUPb) age spectra from five outcrop samples. The AHe sample transect spans ~3 km of structural relief. The four shallowest AHe samples are not reset. However, the two deepest samples exhibit low intrasample variability among replicates and strong date versus grain radius correlations, suggesting post-depositional burial heating to within the AHe partial retention zone. Inverse thermal history modeling of these data resolves a protracted phase of exhumational cooling that began around 33–28 Ma. Detrital ZUPb age spectra from Paleogene strata support an interpretation of diverse inherited thermal histories recorded by the AHe data, and they are also consistent with extant reconstructions of Paleogene sediment dispersal. Placed into regional context, the results constrain a phase of increasing structural relief in the northeastern Brooks Range fold-thrust belt that began by the Eocene. The relief developed in a zone characterized by diminishing structural relief to the west called the Canning displacement zone. Although this zone was active since the Eocene, several structures including the studied part of the MCA were rapidly exhumed in the Oligocene. Lastly, we argue for kinematic compatibility between Cenozoic contraction and active strike-slip in the northeastern Brooks Range, with the temporal change in strain style likely reflecting the increase in structural relief and topography.

Alaska↗