USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Volcanology and Geothermal Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 39Linked to original sources
USGS2026

Decadal trends in the quality of groundwater used for public drinking-water supply in California, 2004–23, California Groundwater Ambient Monitoring and Assessment Program, Priority Basin Project

This study provides a comprehensive assessment of decadal changes in the quality of groundwater used for public drinking-water supply at 444 monitoring sites across California during 2004–23. We assessed decadal step trends in groundwater quality for 145 water-quality constituents and geochemical indicators statewide and across geographic and land-use based network groups. We evaluated the statistical significance of directional changes (predominant increase or decrease of constituent concentrations) and the magnitude of those changes across all network groups. Uranium showed the most widespread directional and high-magnitude increases of all constituents with regulatory benchmarks statewide, particularly in the agriculture-dominated Central Valley as well as urban-and desert-dominated regions of Southern California. Fluoride and perchlorate showed the most widespread directional and high-magnitude decreases of all constituents with regulatory benchmarks statewide, which were also most pronounced in Southern California. Although arsenic and nitrate did not often register significant directional changes across network groups, they showed widespread, high-magnitude changes in both directions (increase and decrease) at levels often exceeding 10 percent of respective regulatory benchmarks statewide. Triazine herbicides (atrazine and simazine) and the gasoline oxygenate methyl tert -butyl ether showed significant directional decreases statewide, but not at levels considered to be of high magnitude compared to respective regulatory benchmarks. We observed significant directional and high-magnitude increases of total dissolved solids statewide, which were most pronounced in agricultural areas. Analysis of explanatory geochemical indicators indicated that prevalent statewide increases of alkalinity and calcium were the predominant components of the observed statewide increases in total dissolved solids by mass. Widespread increases in groundwater alkalinity and calcium across agricultural and urban areas may be related, in part, to warm-season irrigation and other anthropogenic factors that have shifted soil weathering dynamics over the long term. Increasing alkalinity concentrations were related to increasing uranium concentrations, particularly in areas with aquifer materials derived from granitic rocks. Conversely, increasing calcium concentrations were related to decreasing fluoride concentrations, particularly in areas where fluoride occurred naturally at elevated concentrations. Decrease of perchlorate, triazine herbicides, and methyl tert -butyl ether are likely related to decreased anthropogenic source inputs over time and natural attenuation in aquifers.

California↗
USGS2026

Regional characterization of coal resources in the Gulf Coast Coal Region—In support of coal as a potential source for critical minerals and rare earth elements

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The Gulf Coast and the Fort Union regions are the two major lignite-bearing regions within the United States. Recent REE and CM studies of the lignite in these regions have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of Gulf Coast Coal Region lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from drill holes and measured mine and outcrop sections for a total of 31,181 data points. The estimated total remaining coal resource in the Gulf Coast Coal Region is about 83 billion metric tons in the upper 90 meters (approximately 300 feet) of the subsurface. The current estimate of remaining coal resources includes approximately 1.88 billion metric tons of coal that have been extracted in the region since 1983. Texas accounted for 39 percent (32 billion metric tons) of the remaining total resource, followed by Mississippi (24 percent, 20 billion metric tons ), Louisiana (14 percent, 12 billion metric tons), Tennessee (10 percent, 8.5 billion metric tons), and Arkansas (6 percent, 5.1 billion metric tons). Alabama, Georgia, Kentucky, and Missouri each accounted for less than 5 percent of the total resource; Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known statewide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast Coal Region and Fort Union Coal Region resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses.

Alabama, Arkansas, Florida, Georgia, Illinois, Lou↗
USGS1995

Methods for estimating the magnitude and frequency of peak discharges of rural, unregulated streams in Virginia

Methods are presented for estimating the peak discharges of rural, unregulated streams in Virginia. A Pearson Type III distribution is fitted to the logarithms of the unregulated annual peak-discharge records from 363 stream-gaging stations in Virginia to estimate the peak discharge at these stations for recurrence intervals of 2 to 500 years. Peak-discharge characteristics for 284 unregulated stations are divided into eight regions based on physiographic province, and regressed on basin characteristics, including drainage area, main channel length, main channel slope, mean basin elevation, percentage of forest cover, mean annual precipitation, and maximum rainfall intensity. Regression equations for each region are computed by use of the generalized least-squares method, which accounts for spatial and temporal correlation between nearby gaging stations. This regression technique weights the significance of each station to the regional equation based on the length of records collected at each cation, the correlation between annual peak discharges among the stations, and the standard deviation of the annual peak discharge for each station. Drainage area proved to be the only significant explanatory variable in four regions, while other regions have as many as three significant variables. Standard errors of the regression equations range from 30 to 80 percent. Alternate equations using drainage area only are provided for the five regions with more than one significant explanatory variable. Methods and sample computations are provided to estimate peak discharges at gaged and engaged sites in Virginia for recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years, and to adjust the regression estimates for sites on gaged streams where nearby gaging-station records are available.

Virginia↗
USGS2026

Geologic map of pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Much of the southeastern United States, including all of Florida, is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains which have accumulated since Middle Jurassic time. The pre-Middle Jurassic rocks that underlie these coastal plains in Florida, here collectively referred to as “basement,” are known only from a relatively small number of boreholes. This scientific investigations map presents an interpretation of the basement geology in a 1:1,000,000-scale subsurface geologic map with supporting text, data, and figures. The subsurface mapping methodology integrates petrographic, geochronological, thermochronological, geochemical, and mineralogical analyses of drill cores and cuttings in the context of regional geophysical data. The pre-Middle Jurassic rocks of Florida consist of the Gondwanan (West African) Suwannee terrane which was accreted to Laurentia during the Alleghanian orogeny and subsequently intruded by Permian granites, superposed by early Mesozoic rift basins, and partially overlain by bimodal Jurassic volcanic rocks. The younger basement components, specifically the Southwest Florida volcanic province, North Florida tholeiites, early Mesozoic rift basins, and Alleghanian granitoids, have correlative and contemporaneous units throughout the Appalachian orogen. In contrast, Florida’s older basement rocks, including Paleozoic siliciclastic strata of the Suwannee basin, North Florida volcanic series, Osceola and Gaskin intrusive complexes, and the St. Lucie Metamorphic Complex, have neither surface exposures nor unequivocal correlates. Major structures include early Mesozoic normal faults and northwest-striking transfer zones such as the Jay fault. Many of these faults define the boundaries of subbasins within the South Georgia rift system. Top-of-basement structure contours show gentle arches and embayments that are also recognized in overlying coastal plain strata.

Florida↗
USGS2023

Reconnaissance basement geology and tectonics of North Zealandia

New rock dredge samples supply key information to establish the tectonic and geological framework of the northern two-thirds of the 95% submerged Zealandia continent. The R/V Investigator voyage IN2016T01 to the Fairway Ridge, Coral Sea, obtained poorly sorted poly-lithologic pebbly to cobbly sandstones, well sorted fine grained sandstones, mudstones, bioclastic limestones, and basaltic lavas. Post-cruise analytical work comprised petrography, whole rock geochemical and Sr and Nd isotopic analyses, and U-Pb zircon, Rb-Sr, and Ar-Ar geochronology. A Fairway Ridge cobbly sandstone has a ∼95 Ma (early Late Cretaceous) depositional age; two biotite granite cobbles are 111 ± 1 and 128 ± 1 Ma in age, and some volcanic pebbles are also likely Early Cretaceous. Fairway Ridge basalts have intraplate alkaline chemistry and are of Late Eocene age (∼40–36 Ma). By analogy with South Zealandia, we interpret strong positive continental magnetic anomalies of North Zealandia to mainly result from Late Cretaceous to Cenozoic intraplate basalts, many of them rift-related lavas. A new basement geological map of North Zealandia shows the position of the Mesozoic Gondwana magmatic arc axis (Median Batholith) and other major geological units. This study completes onland and offshore reconnaissance geological mapping of the entire 5 Mkm 2 Zealandia continent.

Tectonics↗
USGS2025

Geologic framework and Holocene sand thickness offshore of Seven Mile Island, New Jersey

The U.S. Geological Survey assessed the Quaternary evolution of Seven Mile Island, New Jersey, to quantify coastal sediment availability, which is crucial for establishing sediment budgets, understanding sediment dispersal, and managing coastlines. This report presents preliminary interpretations of seismic profiles, maps of Holocene sand thickness from the shoreline to 2 kilometers offshore, and tables quantifying the volume of available sediment along the coastal margin based on data collected during 2021 and 2022. The results reveal spatial variability in the thickness and cross-shore extent of Holocene sand. The study area was separated into northern, central, and southern zones by using underlying stratigraphy and geomorphic features. The characteristics and spatial extent of the Holocene sand deposit indicate that hydrodynamic processes contribute to its spatial variability. Northern Seven Mile Island contains the thickest deposits of Holocene sand that were formed by sediment bypass around the Townsends Inlet ebb-tidal delta. Specifically, swash bars have welded to the updrift end of Seven Mile Island and have formed thick deposits of Holocene sand that thicken landward and taper seaward. Despite their thickness, these deposits have the smallest cross-shore extent; therefore, northern Seven Mile Island has the smallest volume of Holocene sand of the three geomorphic zones. Central Seven Mile Island has the thinnest Holocene sand deposits because this section of the barrier island is outside the influence of ebb-tidal deltas. Southern Seven Mile Island has the greatest volumes of Holocene sand because of increased accommodation and deposition adjacent to the Hereford Inlet ebb-tidal delta. Even though tidal inlets exert variable influence on the three geomorphic zones, sediment is distributed fairly uniformly within each geomorphic zone; each of the three zones contains 31.05–36.48 percent of the volume of available Holocene sand.

New Jersey↗
USGS2024

Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California

The largest rare earth element (REE) deposit in the United States is a carbonatite intrusion at Mountain Pass in the Mojave Desert, California. Despite a clear spatiotemporal association of alkaline silicate and carbonatite intrusions at Mountain Pass, a genetic model of their mutual formation has not been resolved. The Mountain Pass carbonatite has long been upheld as an example of a primary magmatic body, but recent work has suggested it could be fluid-derived. This study investigates the geochemistry of apatite and monazite grains from the alkaline silicate and carbonatite stocks and dikes of the Mountain Pass district, to elucidate the magmatic history of the intrusive suite and identify the role of fluids in rare earth element mineralization. Three apatite populations are identified in the alkaline silicate rocks. A primary magmatic apatite group supports intrusion of the stocks as separate pulses of magma derived from a spatially extensive metasomatized mantle source region. The second group implicates the role of a regional fluid that mobilized light rare earth elements from apatite grains. A minor group of inherited apatite cores, identified by low Sr and negative Eu anomalies, supports assimilation of crustal material in the formation of the intrusive suite. Analyses of monazite and apatite grains from the carbonatite orebody also reveal a mix of primary magmatic and metasomatic (fluid-related) minerals. Compositional similarities between primary phosphates in the carbonatite and alkaline silicate rocks support a genetic link between the intrusive suites. The presence of fluids regionally and within the carbonatite orebody indicates the Mountain Pass carbonatite should not be classified as a purely magmatic REE deposit.

Arizona, California, Nevada↗
USGS2026

The effect of temperature, flow, density and disease on smallmouth bass (Micropterus dolomieu) early life growth rate

Individual growth rates of fish are influenced by gradually changing environmental conditions and rapid-onset events. However, there is a paucity of information on drivers of spatiotemporal variability in growth rates of fishes across large spatial extents. Using a 36-year dataset of smallmouth bass ( Micropterus dolomieu ) length-at-age data across 10 river reaches in Pennsylvania, USA ( n = 54,068 individuals), we estimated annual early life growth rates (mm year −1 ) and assessed the effects of relative abundance, summer temperature, summer streamflow rate and a disease outbreak on growth rate. We found that temperature had a positive effect on growth rate, varied spatially, and had a stronger effect in diseased reaches. There was also evidence for an impact of disease on early life growth through density-dependent mechanisms, with growth rates increasing from ∼85 to 101 mm·year −1 following disease-related decreases in abundance. This study adds to our understanding of the factors that shape early life growth, including rapid-onset events like disease which can have immediate and lasting effects on growth rate trajectory.

Pennsylvania↗
USGS2023

Sediment thickness map of United States Atlantic and Gulf Coastal Plain Strata, and their influence on earthquake ground motions

With the recent successful accounting of basin depth ground-motion adjustments in seismic hazard analyses for select areas of the western United States, we move toward implementing similar adjustments in the Atlantic and Gulf Coastal Plains by constructing a sediment thickness model and evaluating multiple relevant site amplification models for central and eastern United States seismic hazard analyses. We digitize and combine existing sediment thickness data sets into a composite surface that delineates the base of Cretaceous sediments under the Atlantic Coastal Plain and the base of Mesozoic sediments under the Gulf Coastal Plain. Amplification models dependent on sediment thickness, site natural period, and source-to-site path length are compared with data sets of observed ground motions to evaluate the ability of the new models to improve ground motion estimates. We find that the amplification models can account for observed trends in sediment-thickness and period-dependent residuals, but some tuning is required. For example, the model of Chapman and Guo requires a reference V S 30 , the time-averaged shear-wave velocity within 30 m of the Earth’s surface, for non-Coastal Plain sites, which we estimate to be between about 1 and 2 km/s. Along with our sediment thickness model, we estimate a velocity profile for application to the Harmon et al. site-natural-period-based model in order to best match the Chapman and Guo period dependence for a broad range of sediment thicknesses. The Next Generation of Attenuation models for the eastern United States Gulf Coast path-based adjustment models can also account for seismic attenuation in the Coastal Plain sediments and reduce the standard deviation of total residuals. If enacted in the U.S. Geological Survey National Seismic Hazard Model, these amplification models will reduce predicted short-period (<1 s) and increase predicted long-period (>1 s) ground motions in the Coastal Plains appreciably.

Earthquake Spectra↗
USGS2025

System characterization report on the Environmental Mapping and Analysis Program (EnMAP)

This report addresses system characterization of the Environmental Mapping and Analysis Program hyperspectral sensor by the DLR (German Aerospace Center, ground segment project management), GFZ (Deutsches Geoforschungszentrum, science lead) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the EnMAP hyperspectral sensor; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), and radiometric performances of the EnMAP hyperspectral sensor. Results of these analyses indicate that the Environmental Mapping and Analysis Program has a band-to-band geometric performance in the range of −0.135 to 0.15 pixel, geometric performance relative to the Operational Land Imager in the range of −27.716 meters (−0.92 pixel) to 32.892 meters (1.09 pixels) offset in comparison to Landsat 8 Operational Land Imager, offset of a radiometric comparison in the range of −0.012 to 0.020, slope of a radiometric comparison in the range of 0.947 to 1.031.

Open-File Report↗
USGS2024

Cross section N–N' through the Valley and Ridge province of the southern Appalachian basin, from Greene County, west-central Alabama, to Bibb County, central Alabama

Introduction Geologic cross section N–N′ is the sixth in a series of geologic cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section N–N′ provides a regional view of the structural and stratigraphic framework of the Appalachian basin in the Valley and Ridge province in western and central Alabama; it spans approximately 69 miles (mi) (111 kilometers [km]). This geologic cross section is a companion to geologic cross sections E–E′ , D–D′ , C–C′ , I–I′ , and A–A′ that are located approximately 350 to 550 mi (563 to 885 km) to the northeast. Cross section N–N' complements earlier geologic cross sections through the Alabama part of the Appalachian basin. Although some of the other cross sections show more structural and stratigraphic detail, they are of more limited extent geographically and stratigraphically. Cross section N–N′ contains information that is useful for evaluating energy resources in the Appalachian basin. Although the Appalachian basin petroleum systems are not shown on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and petroleum migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on what is shown on the cross section. In addition, cross section N–N′ may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Alabama↗
USGS2026

Structural evolution and slip rate variations through time of the Puente-Hills blind-thrust fault beneath Los Angeles: Implications for seismic hazard and folding kinematics

Using seismic reflection profiles, historical well logging data, and luminescence and radiocarbon ages, we determine a Pleistocene-Holocene slip history for the central, Santa Fe Springs segment of the Puente Hills blind-thrust fault (PHT), a major seismogenic fault situated beneath the urbanized Los Angeles metropolitan region. We analyze the geometry of correlative stratigraphic units in the forelimb and backlimb of the overlying growth-fold, the Santa Fe Springs anticline, and determine the uplift of seven age-correlative markers. Uplift measurements are converted to thrust displacements on the underlying PHT using a structural method laid out by Don et al. (2022, https://doi.org/10.1785/0120220048 ) that accounts for the geometry of the fault. These data indicate that deep thrust displacement on the PHT is partially consumed updip in the creation of a hanging-wall fault-bend fold, with forelimb growth strata recording <80% of the slip documented within the backlimb. Chronological data from growth strata yield age constraints for folding and faulting on the underlying PHT, providing a detailed incremental slip history derived from both the forelimb and backlimb folding for seven discrete growth horizons, spanning the past 1.4 million years. The resulting six incremental slip rates demonstrate that fault slip has varied through time from the middle Pleistocene to the Holocene. Moreover, these results reveal synchronous acceleration of both the central, Santa Fe Springs and western, Los Angeles segments of the fault system since late Pleistocene time (after 200 ka) and slip rates of greater than 2 mm/yr on the downdip, backlimb, fault-ramp below the anticline.

California↗
USGS1984

Techniques for estimating magnitude and frequency of floods on streams in Indiana

Equations are presented for estimating the magnitude and frequency of floods at ungaged sites on unregulated and nonurban streams in Indiana. The equations were developed by multiple-regression, analysis of basin characteristics and peak-flow statistical data from 242 gaged locations in Indiana, Ohio, and Illinois. The State of Indiana was divided into seven areas on the basis of the regression analysis. A set of equations for estimating peak discharges with recurrence intervals of 2, IO, 25, 50, and 100 years was developed for each area. Significant basin characteristics in the equations are drainage area, channel length, channel slope, mean annual precipitation, storage, precipitation intensity, and a runoff coefficient. Standard errors of estimate for the equations range from 24 to 45 percent. Methods are also presented for estimating flood magnitude and frequency at sites on gaged streams. Flood-frequency data based on observed peaks are given for 270 gaged locations. Twenty of these are on regulated streams, and six are on urban streams. Basin characteristics are also included car 245 of the gaged locations on unregulated and nonurban streams. No techniques are given for estimating flood magnitude and frequency at ungaged sites on regulated or urban streams. A rainfall-runoff model was tlsed to synthesize long-term peak data at 11 gaged locations on small streams. Flood-frequency curves developed from the long-term synthetic data were combined with curves based on short-term observed data to provide weighted estimates of flood magnitude and frequency at the rainfall-runoff stations.

Indiana↗
USGS1994

Hydrogeologic atlas of aquifers in Indiana

Aquifers in 12 water-management basins of Indiana are identified in a series of 104 hydrogeologic sections and 12 maps that show the thickness and configuration of aquifers. The vertical distribution of water-bearing units and a generalized potentiometric profile are shown along 3,500 miles of section lines that were constructed from drillers' logs of more than 4,200 wells. The horizontal scale of the sections is 1:125,000. Maps of aquifers showing the areal distribution of each aquifer type were drawn at a scale of 1:500,000. Unconsolidated aquifers are the most widely used aquifers in Indiana and include surficial, buried, and discontinuous layers of sand and gravel. Most of the surficial sand and gravel is in large outwash plains in northern Indiana and along the major rivers. Buried sand and gravel aquifers are interbedded with till deposits in much of the northern two-thirds of Indiana. Discontinuous sand and gravel deposits are present as isolated lenses, primarily in glaciated areas. The bedrock aquifers generally have lower yields than most of the sand and gravel aquifers; however, bedrock aquifers are areally widespread and are an important source of water. Bedrock aquifer types consist of carbonates; sandstones; complexly interbedded sandstones, siltstones, shales, limestones, and coals; and an upper weathered zone in low permeability rock. Carbonate aquifers underlie about one-half of Indiana and are the most productive of the bedrock aquifers. The other principal bedrock aquifer type, sandstone, underlies large areas in the southwestern one-fifth of Indiana. No aquifer is known to be present in the southeastern corner of Indiana.

Water-Resources Investigations Report↗
USGS2025

Beavers in the Tualatin River Basin, northwestern Oregon

Growing interest in beaver-assisted restoration in the Tualatin River Basin of northwestern Oregon motivated a series of studies by the U.S. Geological Survey to assess the capacity of the stream network to support beaver dams and to evaluate the effects of beaver dams and ponds on urban streams. This multichapter volume describes the data collection from 2016–17 and the findings of these studies, which were done in partnership with Clean Water Services. Chapter A documents the locations of beaver dams in the Tualatin River Basin and how many beaver dams the stream network could support with existing and improved riparian vegetation. Beaver dam capacity was estimated by modifying existing tools to account for the low gradient of many streams in the Tualatin River Basin. Chapter B describes the effects of beaver dams and ponds on hydrologic and hydraulic responses of storm flows. Hydrologic and hydraulic responses for two urban stream reaches were compared with and without beaver dams and ponds and for a range of streamflow conditions using two-dimensional hydraulic models. Chapter C characterizes the effects of beaver dams and ponds on the transport and deposition of suspended sediment. Continuous turbidity, discrete suspended-sediment samples, and streamflow measurements collected during storms and base-flow periods were used to assess: (1) suspended-sediment loads upstream and downstream from two beaver-affected reaches, and (2) seasonal and longitudinal turbidity patterns. Chapter D describes the effects of beaver dams and ponds on longitudinal, spatial, and seasonal water-quality patterns. Continuous and synoptic water-quality data were collected along urban stream reaches, and net ecosystem production was calculated for two beaver-affected reaches. The findings of these studies illustrate that the effects of beaver dams and ponds on hydrology, hydraulics, suspended-sediment transport and deposition, and water quality are dependent on the characteristics of a stream reach (for example, channel gradient, groundwater exchange, and riparian vegetation) and the characteristics of beaver dams and ponds along that reach. This information can be used to consider the implications of beaver-assisted restoration in the Tualatin River Basin and the effects of beaver dams and ponds in urban streams.

Oregon↗
USGS2025

Properties of solid bitumen formed during hydrous, anhydrous, and brine pyrolysis of oil shale: Implications for solid bitumen reflectance in source-rock reservoirs

Solid bitumen reflectance (BR o in %) is widely used as a thermal maturity proxy in source-rock reservoirs, yet solid bitumen texture and physical attributes may be affected by varying environmental constraints during its formation, e.g., water saturation, mineral catalysis, or salinity. Herein we investigated the development of solid bitumen properties during artificial maturation using three diverse (lacustrine to marine) oil shale samples containing abundant amorphous H-rich sedimentary organic matter (bituminite). The oil shales were treated via pyrolysis (320 °C, 72 h) using hydrous, anhydrous, and brine conditions, causing the development of a newly formed solid bitumen in the experiment residues from the thermal conversion of bituminite. The properties of the newly formed solid bitumen then were evaluated via geochemical screening tests, optical and electron microscopy, and infrared spectroscopy. Experimental residues also were treated via solvent extraction, allowing characterization of the effects of extraction on solid bitumen. Results showed that bituminite with higher resin and asphaltene components evolved to a solid bitumen with higher reflectance (as a percentage of the original value) when exposed to the same heat treatment, relative to bituminite with higher saturate and aromatic components. Aromatization of solid bitumen also was generally more pronounced in the presence of deionized water relative to anhydrous conditions, supporting prior observations. These results suggest the compositions of primary sedimentary organic matter, and the local concentration of water, affect the development of solid bitumen during thermal advance, potentially explaining the origin of multiple solid bitumen populations with varying reflectance in source-rock reservoir samples or in a single microscope field. Experiments using brine were inconclusive regarding enhanced/decreased aromatization, which could be attributed to the salinities of the brines used in the tests. Extraction of residues caused a consistent increase in BR o values, suggesting that migrating or expelled oils could cause an increase in BR o via natural solvation and absent an increase in temperature. This work provides insights into the development and evolution of BR o in source-rock reservoirs as a function of the composition of the original bituminite and changing environmental conditions, with potentially broad application for petroleum prospecting and resource estimation.

Colorado↗
USGS2024

Interactive effects of salinity and hydrology on radial growth of bald cypress (Taxodium distichum (L.) Rich.) in coastal Louisiana, USA

Tidal freshwater forests are usually located at or above the level of mean high water. Some Louisiana coastal forests are below mean high water, especially bald cypress ( Taxodium distichum (L.) Rich.) forests because flooding has increased due to the combined effects of global sea level rise and local subsidence. In addition, constructed channels from the coast inland act as conduits for saltwater. As a result, saltwater intrusion affects the productivity of Louisiana’s coastal bald cypress forests. To study the long-term effects of hydrology and salinity on the health of these systems, we fitted dendrometer bands on selected trees to record basal area increment as a measure of growth in permanent forest productivity plots established within six bald cypress stands. Three stands were in freshwater sites with low salinity rooting zone groundwater (0.1–1.3 ppt), while the other three had higher salinity rooting zone groundwater (0.2–4.9 ppt). Water level was logged continuously, and salinity was measured monthly to quarterly on the surface and in groundwater wells. Higher groundwater salinity levels were related to decreased bald cypress radial growth, while higher freshwater flooding increased radial growth. With these data, coastal managers can model rates of bald cypress forest change as a function of salinity and flooding.

Louisiana↗
USGS2025

Origin and evolution of mafic volcanism associated with 3 m.y. of andesite production at the Goat Rocks volcanic cluster, southern Washington Cascade Range

More than 3 m.y. of mafic volcanism near the Goat Rocks volcanic cluster in the southern Washington Cascade Range, USA, lends insight into the evolution of basalts and the subarc mantle at a long-lived, major arc volcanic locus. We contribute field observations, 40 Ar/ 39 Ar dates, paleomagnetic directions, and bulk rock and mineral compositions to characterize nine mafic units that erupted in association with the Goat Rocks volcanic cluster. The time frame of mafic volcanism, ca. 3.6 Ma to 60 ka, encompasses the lifespan of the central volcanic cluster (3.1 Ma to 115 ka), with a lull from ca. 2.7 Ma to 1.4 Ma. A climactic period of voluminous mafic activity and far-traveled lava flows, including construction of the Hogback Mountain shield volcano, coincided with voluminous andesite eruptions from the central volcanic cluster. The basaltic rocks in the Goat Rocks area are calc-alkaline to barely tholeiitic and have high field strength element depletion relative to large-ion lithophile elements characteristic of calc-alkaline basalts (CAB) of the Cascade volcanic arc. Unlike at neighboring andesitic volcanic centers (Mounts Adams, St. Helens, and Rainier), no other mafic end members such as high-aluminum olivine tholeiite (HAOT) or intraplate-type basalt (IPB) are present at or near the Goat Rocks volcanic cluster, although some of the calc-alkaline basalts in this study have IPB-like affinities. The Goat Rocks mafic units exhibit two main temporal trends in composition: (1) the most primitive basalts erupted earlier, compared to less primitive and more evolved compositions later, and (2) high field strength element concentrations are higher in the younger basalt units relative to the oldest two. In contrast to these temporal trends, the mafic units define two compositional groups that recur through time, a low-Sr and a high-Sr group, each with distinct trace element and Sr and Nd isotope ratios. Although radiogenic isotope ratios are generally aligned with High Cascades CAB and HAOT, some extend toward IPB of Mount Adams and Simcoe Mountains volcanic field. Olivine-dominated crystal fractionation at shallow pressure from a small range of parent magma compositions accounts for much of the variation among the basalts and basaltic andesites. A high-pressure fractionation model is plausible for only one of the youngest basalt units (basalt of Walupt Lake volcano). Mafic recharge and crustal assimilation accounts for the incompatible-element enriched composition of basaltic andesites erupted during construction of the largest andesitic centers, further supporting sustained basalt mass flux and thermal energy driving andesite genesis. We model the most primitive members of the Goat Rocks mafic units as partial melts of successively less depleted mantle in time. Variable degrees of fluxing with fluids and melts from subduction explain the distinction between high-Sr and low-Sr groups. We propose that mantle metasomatism by ancestral subduction and fluid-flux melting is heterogeneously distributed through the local subarc mantle and played a greater role in the genesis of the high-Sr basalt group. The limited range of primitive basalt types around the Goat Rocks volcanic cluster contrasts with the much greater diversity of basalts throughout the southern Washington to northern Oregon Cascade arc. On the other hand, the central volcanic cluster encompasses nearly the entire diversity observed at neighboring composite volcanoes. In the case of the Goat Rocks area at least, and perhaps attributable to the entire region, this means that the genesis of diverse intermediate magmas is independent from and does not require vastly different parental basalt compositions.

California, Oregon, Washington↗