USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2002

Proterozoic metamorphism and uplift history of the north-central Laramie Mountains, Wyoming, USA

The Laramie Mountains of south-eastern Wyoming contain two metamorphic domains that are separated by the 1.76 Ga. Laramie Peak shear zone (LPSZ). South of the LPSZ lies the Palmer Canyon block, where apatite U-Pb ages are c. 1745 Ma and the rocks have undergone Proterozoic kyanite-grade Barrovian metamorphism. In contrast, in the Laramie Peak block, north of the shear zone, the U-Pb apatite ages are 2.4-2.1 Ga, the granitic rocks are unmetamorphosed and supracrustal rocks record only low-T amphibolite facies metamorphism that is Archean in age. Peak mineral assemblages in the Palmer Canyon block include (a) quartz-biotite-plagioclase-garnet-staurolite-kyanite in the pelitic schists; (b) quartz-biotite-plagioclase-low-Ca amphiboles-kyanite in Mg-Al-rich schists, and locally (c) hornblende-plagioclase-garnet in amphibolites. All rock types show abundant textural evidence of decompression and retrograde re-equilibration. Notable among the texturally late minerals are cordierite and sapphirine, which occur in coronas around kyanite in Mg-Al-rich schists. Thermobarometry from texturally early and late assemblages for samples from different areas within the Palmer Canyon block define decompression from > 7 kbar to < 3 kbar. The high-pressure regional metamorphism is interpreted to be a response to thrusting associated with the Medicine Bow orogeny at c. 1.78-1.76 Ga. At this time, the north-central Laramie Range was tectonically thickened by as much as 12 km. This crustal thickening extended for more than 60 km north of the Cheyenne belt in southern Wyoming. Late in the orogenic cycle, rocks of the Palmer Canyon block were uplifted and unroofed as the result of transpression along the Laramie Peak shear zone to produce the widespread decompression textures. The Proterozoic tectonic history of the central Laramie Range is similar to exhumation that accompanied late-orogenic oblique convergence in many Phanerozoic orogenic belts.

Journal of Metamorphic Geology↗
USGS1997

Variability in perceived satisfaction of reservoir management objectives

Fuzzy set theory provides a useful model to address imprecision in interpreting linguistically described objectives for reservoir management. Fuzzy membership functions can be used to represent degrees of objective satisfaction for different values of management variables. However, lack of background information, differing experiences and qualifications, and complex interactions of influencing factors can contribute to significant variability among membership functions derived from surveys of multiple experts. In the present study, probabilistic membership functions are used to model variability in experts' perceptions of satisfaction of objectives for hydropower generation, fish habitat, kayaking, rafting, and scenery preservation on the Green River through operations of Flaming Gorge Dam. Degree of variability in experts' perceptions differed among objectives but resulted in substantial uncertainty in estimation of optimal reservoir releases.

Journal of Water Resources Planning and Management↗
USGS2022

One Health in action: Flea control and interpretative education at Badlands National Park

One Health involves interdisciplinary collaboration to improve, protect, and preserve the health of humans, wildlife, and ecosystems, and advocates for unified approaches to One Health challenges (Buttke et al. 2015). Here, we focus on a One Health challenge of nearly global distribution: Yersinia pestis , the flea-borne bacterial agent of plague. The bacterium poses a significant risk to humans and wildlife, causing social strife in some regions and transforming ecosystems (Eads and Biggins 2015). The conservation implications are profound in the western United States, where Y. pestis was first introduced in 1900. Considerable effort is devoted to plague mitigation, sometimes for human or wildlife health purposes separately. We present a synergy between plague mitigation for human and wildlife health.

South Dakota↗
USGS1977

Chemical variability in the Lakeview Mountains pluton, southern California batholith: A comparison of the methods of correspondence analysis and extended Q-mode factor analysis

An extended method of Q -mode factor analysis that has been described previously offers a number of important advantages over conventional Q -mode factor analysis and correspondence analysis when applied to compositional data. Among these are the ability to compute the compositions, in the original units of the data, represented by the reference axes. The only special requirement of the data is that the values for each observation sum to a constant. Mathematically derived reference axes, such as the principal-components and varimax axes, commonly represent compositions that are partly negative. Even where no negative values are present, these compositions are comparatively difficult to interpret in petrologic terms and impossible or inappropriate to include in petrogenetic models. A model has been developed for the Lakeview Mountains pluton which employs vectors representing the compositions of melanocratic schlieren, leucocratic schlieren, and inclusions as the reference axes. When the effect of the inclusions is removed, the compositional zoning in the pluton is like that found in otherwise similar plutons in the Sierra Nevada batholith. The genetic implication of the model is that the inclusions were separated from the magma at least in its marginal parts. In the central part of the pluton, the inclusions were either separated to a lesser extent than in the marginal parts, or were reincorporated into the magma.

California↗
USGS1977

Electrical soundings near Yellow Creek, Rio Blanco County, Colorado

Ten vertical electrical soundings were made in the Piceance Creek Basin in October 1974-5 along Yellow Creek, 2 in Big Duck Creek, and 1 each along Corral Gulch, on the hill in sec. 20, 1 kilometre northwest of 84 Ranch, and along the White River between the mouths of Yellow and Piceance Creeks. Interpretations of these soundings indicate that the anisotropy of the upper oil shales decreases from 2 in the basin center to 1 at a location on its flank. This decrease could result from a greater number of vertical water-filled fractures in the upper shales near the edge of the basin. On the other hand, the anisotropy coefficient for the lower shales increases from 2 to around 9 along the same section, indicating the presence of an increasing number of isolated horizontal aquifers in the lower shales on the basin flank. It is speculated that this trend for the lower shales reverses nearer the basin edge in the area of recharge of these splintered horizontal aquifers.

Colorado↗
USGS2014

Source and progression of a submarine landslide and tsunami: The 1964 Great Alaska earthquake at Valdez

Like many subduction zone earthquakes, the deadliest aspects of the 1964 M = 9.2 Alaska earthquake were the tsunamis it caused. The worst of these were generated by local submarine landslides induced by the earthquake. These caused high runups, engulfing several coastal towns in Prince William Sound. In this paper, we study one of these cases in detail, the Port Valdez submarine landslide and tsunami. We combine eyewitness reports, preserved film, and careful posttsunami surveys with new geophysical data to inform numerical models for landslide tsunami generation. We review the series of events as recorded at Valdez old town and then determine the corresponding subsurface events that led to the tsunami. We build digital elevation models of part of the pretsunami and posttsunami fjord‐head delta. Comparing them reveals a ~1500 m long region that receded 150 m to the east, which we interpret as the primary delta landslide source. Multibeam imagery and high‐resolution seismic reflection data identify a ~400 m wide chute with hummocky deposits at its terminus, which may define the primary slide path. Using these elements we run hydrodynamic models of the landslide‐driven tsunamis that match observations of current direction, maximum inundation, and wave height at Valdez old town. We speculate that failure conditions at the delta front may have been influenced by manmade changes in drainage patterns as well as the fast retreat of Valdez and other glaciers during the past century.

Alaska↗
USGS2013

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

North Dakota↗
USGS2017

Comparing measurement response and inverted results of electrical resistivity tomography instruments

In this investigation, we compare the results of electrical resistivity measurements made by six commercially available instruments on the same line of electrodes to determine if there are differences in the measured data or inverted results. These comparisons are important to determine whether measurements made between different instruments are consistent. We also degraded contact resistance on one quarter of the electrodes to study how each instrument responds to different electrical connection with the ground. We find that each instrument produced statistically similar apparent resistivity results, and that any conservative assessment of the final inverted resistivity models would result in a similar interpretation for each. We also note that inversions, as expected, are affected by measurement error weights. Increased measurement errors were most closely associated with degraded contact resistance in this set of experiments. In a separate test we recorded the full measured waveform for a single four-electrode array to show how poor electrode contact and instrument-specific recording settings can lead to systematic measurement errors. We find that it would be acceptable to use more than one instrument during an investigation with the expectation that the results would be comparable assuming contact resistance remained consistent.

Journal of Environmental & Engineering Geophysics↗
USGS1985

PROCEDURES FOR ACCURATE PRODUCTION OF COLOR IMAGES FROM SATELLITE OR AIRCRAFT MULTISPECTRAL DIGITAL DATA.

Because the display and interpretation of satellite and aircraft remote-sensing data make extensive use of color film products, accurate reproduction of the color images is important. To achieve accurate color reproduction, the exposure and chemical processing of the film must be monitored and controlled. By using a combination of sensitometry, densitometry, and transfer functions that control film response curves, all of the different steps in the making of film images can be monitored and controlled. Because a sensitometer produces a calibrated exposure, the resulting step wedge can be used to monitor the chemical processing of the film. Step wedges put on film by image recording machines provide a means of monitoring the film exposure and color balance of the machines.

Journal of Imaging Technology↗
USGS2007

Structure and composition of a watershed-scale sediment information network

A 'Watershed-Scale Sediment Information Network' (WaSSIN), designed to complement UNESCO's International Sedimentation Initiative, was endorsed as an initial project by the World Association for Sedimentation and Erosion Research. WaSSIN is to address global fluvial-sediment information needs through a network approach based on consistent protocols for the collection, analysis, and storage of fluvial-sediment and ancillary information at smaller spatial scales than those of the International Sedimentation Initiative. As a second step of implementation, it is proposed herein that the WaSSIN have a general structure of two components, (1) monitoring and data acquisition and (2) research. Monitoring is to be conducted in small watersheds, each of which has an established database for discharge of water and suspended sediment and possibly for bed load, bed material, and bed topography. Ideally, documented protocols have been used for collecting, analyzing, storing, and sharing the derivative data. The research component is to continue the collection and interpretation of data, to compare those data among candidate watersheds, and to determine gradients of fluxes and processes among the selected watersheds. To define gradients and evaluate processes, the initial watersheds will have several common attributes. Watersheds of the first group will be: (1) six to ten in number, (2) less than 1000 km2 in area, (3) generally in mid-latitudes of continents, and (4) of semiarid climate. Potential candidate watersheds presently include the Weany Creek Basin, northeastern Australia, the Zhi Fanggou catchment, northern China, the Eshtemoa Watershed, southern Israel, the Metsemotlhaba River Basin, Botswana, the Aiuaba Experimental Basin, Brazil, and the Walnut Gulch Experimental Watershed, southwestern United States.

International Journal of Sediment Research↗
USGS2017

Mapping tide-water glacier dynamics in east Greenland using landsat data

Landsat multispectral scanner and thematic mapper images were co-registered For the Kangerdlugssuaq Fjord region in East Greenland and were used to map glacier drainage-basin areas, changes in the positions of tide-water glacier termini and to estimate surface velocities of the larger tide-water glaciers. Statistics were compiled to document distance and area changes to glacier termini. The methodologies developed in this study are broadly applicable to the investigation of tide-water glaciers in other areas. The number of images available for consecutive years and the accuracy with which images are co-registered are key factors that influence the degree to which regional glacier dynamics can be characterized using remotely sensed data. Three domains of glacier state were interpreted: net increase in terminus area in the southern part of the study area, net loss of terminus area for glaciers in upper Kangerdlugssuaq Fjord and a slight loss of glacier terminus area northward from Ryberg Fjord. Local increases in the concentrations of drifting icebergs in the fjords coincide with the observed extension of glacier termini positions Ice-surface velocity estimates were derived for several glaciers using automated image cross-correlation techniques The velocity determined for Kangerdlugssuaq Gletscher is approximately 5.0 km a −1 and that for Kong Christian IV Gletscher is 0.9 km a −1 . The continuous presence of icebergs and brash ice in front of these glaciers indicates sustained rates of ice-front calving.

Journal of Glaciology↗
USGS1997

The Phanerozoic impact cratering rate: Evidence from the farside of the Moon

The relatively recent (<1 b.y.) flux of asteroids and comets forming large craters on the Earth and Moon may be accurately recorded by craters with bright rays on the Moon's farside. Many previously unknown farside rayed craters are clearly distinguished in the low-phase-angle images returned by the Clementine spacecraft. Some large rayed craters on the lunar nearside are probably significantly older than 1 Ga; rays remain visible over the maria due to compositional contrasts long after soils have reached optical maturity. Most of the farside crust has a more homogeneous composition and only immature rays are visible. The size-frequency distribution of farside rayed craters is similar to that measured for Eratosthenian craters (up to 3.2 b.y.) at diameters larger than 15 km. The areal density of farside rayed craters matches that of a corrected tabulation of nearside Copernican craters. Hence the presence of bright rays due to immature soils around large craters provides a consistent time-stratigraphic basis for defining the base of the Copernican System. The density of large craters less than ∼3.2 b.y. old is ∼3.2 times higher than that of large farside rayed craters alone. This observation can be interpreted in two ways: (1) the average cratering rate has been constant over the past 3.2 b.y. and the base of the Copernican is ∼1 Ga, or (2) the cratering rate has increased in recent geologic time and the base of the Copernican is less than 1 Ga. We favor the latter interpretation because the rays of Copernicus (800–850 m.y. old) appear to be very close to optical maturity, suggesting that the average Copernican cratering rate was ∼35% higher than the average Eratosthenian rate. Other lines of evidence for an increase in the Phanerozoic (545 Ga) cratering rate are (1) the densities of small craters superimposed on Copernicus and Apollo landing sites, (2) the rates estimated from well-dated terrestrial craters (≤120 m.y.) and from present-day astronomical observations, and (3) the Proterozoic rate suggested by the crater record of Australia. The hypothesis most consistent with several key observations is that the cratering rate has increased by ∼2x during the past ∼300 m.y‥

Journal of Geophysical Research E: Planets↗
USGS1996

Use of ground-penetrating radar and continuous seismic-reflection profiling on surface-water bodies in environmental and engineering studies

Ground‐penetrating radar (GPR) and continuous seismic‐reflection profiling (CSP) on shallow rivers, lakes, and ponds are efficient and economical ways of obtaining subsurface hydrologic and geologic information for environmental and engineering studies. These methods are similar in that they produce continuous subsurface profiles, are easy to use in some applications, and the records can occasionally be straightforward to interpret. They are dissimilar in that GPR cannot penetrate electrically conductive water or subsurface sediments, and CSP usually cannot operate in water less than 5 feet (ft.) deep. GPR records collected on a lake in New Hampshire have been interpreted to estimate the depth to bedrock and to evaluate the grain‐size characteristics of the underlying stratified drift at the lakeshore boundary. In a pond in Massachusetts, CSP and GPR were used to determine depth to bedrock and the grain‐size characteristics of the subbottom materials in part of the pond. Water‐column multiple reflections, depth and conductivity of water and subsurface materials, and diffractions degraded the quality of the GPR records. CSP records collected in the Connecticut River near Hartford, Connecticut were used to estimate the depth of till and bedrock interfaces and to evaluate grain‐size characteristics of subsurface materials. Interpreted CSP records also can indicate bedding planes within consolidated rock units. Water‐column multiple reflections and very shallow water degraded the quality of the CSP records. GPR and CSP methods have been used to delineate infilled scour holes near bridge piers. Scour holes that were filled with up to 8 ft. of loose sand were mapped during engineering scour studies near a bridge in Connecticut. Because GPR and CSP operate on different physical principles, the two geophysical methods complement each other. Depending on the required depth of penetration and the degree of resolution needed, one or both of these methods can be used to acquire accurate and reliable subsurface hydrologic and geologic information critical to environmental and engineering studies.

Journal of Environmental & Engineering Geophysics↗
USGS2024

Evolution of a lake margin recorded in the Sutton Island member of the Murray formation, Gale crater, Mars

This study uses data from the Mars Science Laboratory Curiosity rover to document the facies of the Sutton Island member of the Murray formation, interpret paleoenvironments, and establish key stratigraphic transitions at Gale crater. Two facies associations were identified: Facies Association 1 (FA1) and Facies Association 2 (FA2). Individual facies in FA1 include planar-laminated mudstone with minor intervals of planar sandstone, ripple cross-laminated sandstone, cross-stratified sandstone, and alternating laminated sandstone and mudstone. Meter-thick packages of planar-laminated mudstone in FA1 are interpreted to represent deposition in low-energy ponded environments along the lake margin. Straight- and curve-crested ripple cross-laminated facies are interpreted to represent current-influenced deposition. Cross-stratified sandstone facies consist of dm-thick sets that represent deposition in distal channels. Intercalated mm-scale mudstone and sandstone laminae represent waning flow conditions and possible channel abandonment. Facies in FA1 collectively represent deposition in a distal delta plain. FA2 is comprised of planar-laminated mudstone with minor sandstone and is interpreted to represent deposition in a lacustrine-basin setting by suspension settling linked to density flows. FA1 transitions upward into FA2, defining a rapid transgression substantial enough to facilitate the deposition of distal lake facies above delta plain facies. The abrupt transition from FA2 back to FA1 deltaic deposits is suggestive of forced regression. Facies in FA1 and FA2 are consistent with the prevalence of aqueous environments recorded in other Murray formation members and extend our understanding of the dynamic sedimentary processes that characterized ancient lacustrine systems at Gale crater.

Journal of Geophysical Research - Planets↗
USGS2009

Petrogenesis of basaltic volcanic rocks from the Pribilof Islands, Alaska, by melting of metasomatically enriched depleted lithosphere, crystallization differentiation, and magma mixing

The Pribilof Islands, Alaska, are located in the Bering Sea in a continental intraplate setting. In this study we examine the petrology and geochemistry of volcanic rocks from St. Paul (0??54-0??003 Ma) and St. George (2??8-1??4 Ma) Islands, the two largest Pribilof Islands. Rocks from St. George can be divided into three groups: group 1 is a high-MgO, low-SiO. 2 suite composed primarily of basanites; group 2 is a high-MgO, high-SiO 2 suite consisting predominantly of alkali basalts; group 3 is an intermediate- to low-MgO suite that includes plagioclase-phyric subalkali basalts and hawaiites. Major and trace element geochemistry suggests that groups 1 and 2 formed by small-degree partial melting of amphibole-bearing to amphibole-free garnet peridotite. Group 1 rocks were the earliest melts produced from the most hydrous parts of the mantle, as they show the strongest geochemical signature of amphibole in their source. The suite of rocks from St. Paul ranges from 14??4 to 4??2 wt % MgO at relatively constant SiO 2 contents (43??1-47??3 wt %). The most primitive St. Paul rocks are modeled as mixtures between magmas with compositions similar to groups 1 and 2 from St. George Island, which subsequently fractionated olivine, clinopyroxene, and spinel to form more evolved rocks. Plagioclase-phyric group 3 rocks from St. George are modeled as mixtures between an evolved melt similar to the evolved magmas on St. Paul and a fractionated group 2 end-member from St. George. Mantle potential temperatures estimated for primitive basanites and alkali basalts are ???1400??C and are similar to those of mid-ocean ridge basalts (MORB). Similarly, 87 Sr/. 86 Sr and 143 Nd/. 144 Nd values for all rocks are MORB-like, in the range of 0??702704-0??703035 and 0??513026-0??513109, respectively. 208 Pb/. 204 Pb vs 206 Pb/. 204 Pb values lie near the MORB end-member but show a linear trend towards HIMU (high time-integrated 238 U/. 204 Pb). Despite isotopic similarities to MORB, many of the major and trace element characteristics are similar to those of ocean island basalts (OIB), including enrichment in alkalis and incompatible trace elements. These characteristics are interpreted to indicate that their mantle source experienced an ancient melt-removal event that is reflected in depleted radiogenic isotopic compositions and was then re-enriched by metasomatism that elevated incompatible trace element contents, but was too young to produce a time-integrated change in radiogenic isotopic ratios. Evidence suggests that the Pribilof Island basalts did not form in either a plume or a back-arc basin tectonic setting. Rather, they were produced by melting of metasomatically hydrated upper mantle peridotite at relatively low temperatures and were able to erupt at the surface through extensional or transtensional faults that served as conduits for the magmas. ?? The Author 2009. Published by Oxford University Press.

Journal of Petrology↗
USGS2002

Plotting equation for Gaussian percentiles and a spreadsheet program for generating probability plots

Two-dimensional plotting tools can be of invaluable assistance in analytical scientific pursuits, and have been widely used in the analysis and interpretation of sedimentologic data. We consider, in this work, the use of arithmetic probability paper (APP). Most statistical computer applications do not allow for the generation of APP plots, because of apparent intractable nonlinearity of the percentile (or probability) axis of the plot. We have solved this problem by identifying an equation(s) for determining plotting positions of Gaussian percentiles (or probabilities), so that APP plots can easily be computer generated. An EXCEL example is presented, and a programmed, simple-to-use EXCEL application template is hereby made publicly available, whereby a complete granulometric analysis including data listing, moment measure calculations, and frequency and cumulative APP plots, is automatically produced.

Journal of Sedimentary Research↗
USGS1999

The rise and fall of late Paleozoic trilobites of the United States

Based on range data and generic composition, four stages of evolution are recognized for late Paleozoic trilobites of the contiguous United States. Stage 1 occurs in the Lower Mississippian (Kinderhookian-Osagean) and is characterized by a generically diverse association of short-ranging, stenotopic species that are strongly provincial. Stage 2 species are present in the Upper Mississippian and consist of a single, eurytopic, pandemic genus, Paladin. Species of Stage 2 are much longer-ranging than those of Stage 1, and some species may have persisted for as long as 12 m.y. Stage 3 is present within Pennsylvanian and Lower Permian strata and consists initially of the eurytopic, endemic genera Sevillia and Ameura as well as the pandemic genus Ditomopyge. During the middle Pennsylvanian the very long-ranging species Ameura missouriensis and Ditomopyge scitula survived for more than 20 m.y. During the late Pennsylvanian and early Permian, a number of pandemic genera appear to have immigrated into what is now North America. Stage 4 is restricted to the Upper Permian (late Leonardian-Guadalupian) strata and is characterized by short-ranging, stenotopic, provincial genera. The main causal factor controlling the four-stage evolution of late Paleozoic trilobites of the United States is interpreted to be eustacy. Whereas Stage 1 represents an adaptive radiation developed during the Lower Mississippian inundation of North America by the Kaskaskia Sequence, Stage 2 is present in strata deposited during the regression of the Kaskaskia sea. Stage 3 was formed during the transgression and stillstand of the Absaroka Sequence and, although initially endemic, Stage 3 faunas are strongly pandemic in the end when oceanic circulation patterns were at a maximum. A mid-Leonardian sea-level drop caused the extinction of Stage 3 fauna. Sea-level rise near the end of the Leonardian and into the Guadalupian created an adaptive radiation of stentopic species of Stage 4 that quickly became extinct with the latest Permian regression.

Journal of Paleontology↗
USGS1997

Seismic reflection images beneath Puget Sound, western Washington State: The Puget Lowland thrust sheet hypothesis

Seismic reflection data show that the densely populated Puget Lowland of western Washington state is underlain by subhorizontal Paleogene and Neogene sedimentary rocks deformed by west and northwest trending faults and folds. From south to north beneath the Lowland, features seen on the seismic data include: the horizontally-stratified, 3.5 km thick Tacoma sedimentary basin; the Seattle uplift with south dipping (∼20°) strata on its south flank and steeply (50° to 90°) north dipping strata and the west-trending Seattle fault on its north flank; the 7.5 km thick, northward-thinning Seattle sedimentary basin; the antiformal Kingston arch; and the northwest trending, transpressional Southern Whidbey Island fault zone (SWIF). Interpreting the uplifts as fault-bend and fault-propagation folds leads to the hypothesis that the Puget Lowland lies on a north directed thrust sheet. The base of the thrust sheet may lie at 14 to 20 km depth within or at the base of a thick block of basaltic Crescent Formation; its edges may be right-lateral strike-slip faults along the base of the Cascade Range on the east and the Olympic Mountains on the west. Our model suggests that the Seattle fault has a long-term slip rate of about 0.25 mm/year and is large enough to generate a M 7.6 to 7.7 earthquake.

Washington↗