USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2012

Geologic map of the Alley Spring quadrangle, Shannon County, Missouri

The Alley Spring 7.5-minute quadrangle is located in south-central Missouri within the Salem Plateau region of the Ozark Plateaus physiographic province. About 1,990 feet (ft) of flat-lying to gently dipping Lower Paleozoic sedimentary rocks, mostly dolomite, chert, sandstone, and orthoquartzite, overlie Mesoproterozoic volcanic rocks. A small exposure of the volcanic rocks exists near the eastern edge of the quadrangle. Unconsolidated residuum, colluvium, terrace deposits, and alluvium overlie the sedimentary rocks. Karst features, such as sinkholes, caves, and springs, have formed in the carbonate rocks. Many streams are spring fed. Alley Spring, the largest karst spring in the quadrangle, has an average discharge of 81 million gallons per day. The topography is a dissected karst plain with elevation ranging from 630 ft where the Jacks Fork River exits the quadrangle to more than 1,140 ft at numerous places in the northern half of the quadrangle. The most prominent physiographic feature is the valley of the Jacks Fork River. Most of the land in the quadrangle is privately owned and used primarily for grazing cattle and horses and growing timber. A large minority of the land within the quadrangle is publicly owned, either by the Missouri State Forests or by the Ozark National Scenic Riverways of the National Park Service. Geologic mapping for this investigation was conducted in 2003 and 2004.

Missouri↗
USGS2013

Geologic map of the Jam Up Cave and Pine Crest quadrangles, Shannon, Texas, and Howell Counties, Missouri

The Jam Up Cave and Pine Crest 7.5-minute quadrangles are located in south-central Missouri within the Salem Plateau region of the Ozark Plateaus physiographic province. About 2,400 to 3,100 feet (ft) of flat-lying to gently dipping Lower Paleozoic sedimentary rocks, mostly dolomite, chert, sandstone, and orthoquartzite, overlie Mesoproterozoic igneous basement rocks. Unconsolidated residuum, colluvium, terrace deposits, and alluvium overlie the sedimentary rocks. Numerous karst features, such as sinkholes, caves, and springs, have formed in the carbonate rocks. Many streams are spring fed. The topography is a dissected karst plain with elevations ranging from about 690 ft where the Jacks Fork River exits the northeastern corner of the Jam Up Cave quadrangle to about 1,350 ft in upland areas along the north-central edge and southwestern corner of the Pine Crest quadrangle. The most prominent physiographic feature is the valley of the Jacks Fork River. This reach of the upper Jacks Fork, with its clean, swiftly-flowing water confined by low cliffs and bluffs, provides one of the most beautiful canoe float trips in the nation. Most of the land in the quadrangles is privately owned and used primarily for grazing cattle and horses and growing timber. A large minority of the land within the quadrangles is publicly owned by the Ozark National Scenic Riverways of the National Park Service. Geologic mapping for this investigation was conducted in 2005 and 2006.

Missouri↗
USGS2011

Geologic map of Saint Lawrence Island, Alaska

Saint Lawrence Island is located in the northern Bering Sea, 190 km southwest of the tip of the Seward Peninsula, Alaska, and 75 km southeast of the Chukotsk Peninsula, Russia (see index map, map sheet). It lies on a broad, shallow-water continental shelf that extends from western Alaska to northeastern Russia. The island is situated on a northwest-trending structural uplift exposing rocks as old as Paleozoic above sea level. The submerged shelf between the Seward Peninsula and Saint Lawrence Island is covered mainly with Cenozoic deposits (Dundo and Egiazarov, 1982). Northeast of the island, the shelf is underlain by a large structural depression, the Norton Basin, which contains as much as 6.5 km of Cenozoic strata (Grim and McManus, 1970; Fisher and others, 1982). Sparse test-well data indicate that the Cenozoic strata are underlain by Paleozoic and Proterozoic rocks, similar to those exposed on the Seward Peninsula (Turner and others, 1983). Saint Lawrence Island is 160 km long in an east-west direction and from 15 km to 55 km wide in a north-south direction. The east end of the island consists largely of a wave-cut platform, which has been elevated as much as 30 m above sea level. Isolated upland areas composed largely of granitic plutons rise as much as 550 m above the wave-cut platform. The central part of the island is dominated by the Kookooligit Mountains, a large Quaternary shield volcano that extends over an area of 850 km 2 and rises to an elevation of 630 m. The west end of the island is composed of the Poovoot Range, a group of barren, rubble-covered hills as high as 450 m that extend from Boxer Bay on the southwest coast to Taphook Mountain on the north coast. The Poovoot Range is flanked on the southeast by the Putgut Plateau, a nearly flat, lake-dotted plain that stands 30?60 m above sea level. The west end of the island is marked by uplands underlain by the Sevuokuk pluton (unit Kg), a long narrow granite body that extends from Gambell on the north to near Boxer Bay on the south. Headlands having rugged cliffs or narrow, boulder-strewn beaches characterize the southwest coastline. The geologic map of Saint Lawrence Island was prepared from published and unpublished field investigations carried out between 1966 and 1971 by W.W. Patton, Jr., Bela Csejtey, Jr., T.P. Miller, J.T. Dutro, Jr., J.M. Hoare, and W.H. Condon (Patton and Csejtey, 1971, 1980) and data from Ormiston and Fehlmann (1969). Fossils collected during these investigations are reported in the Alaska Paleontological Database (www.alaskafossil.org), and mineral resource information is summarized in the online Alaska Resource Data File (Hudson, 1998).

Alaska↗
USGS1989

Geologic map of the Latir Volcanic Field and adjacent areas, northern New Mexico

This map was first published as a printed edition in 1989. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. This map encompasses all or parts of ten 7.5 minute quadrangles in the Taos Range of the Sangre de Cristo Mountains in northern New Mexico. Geologic mapping was initiated in this area by the U.S. Geological Survey in response to its mandate under the Wilderness Act of 1964 to evaluate the mineral resource potential of the Latir and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area in the Carson National Forest. The mapping was later extended to adjacent areas in order to better understand the regional geology and geologic history of the range. The present map focuses on the early Tertiary (largely Oligocene) Latir Volcanic Field and plutonic rocks associated with it. The basement rocks in the map area are Paleoproterozic amphibolite-facies metasedimentary and metavolcanic rocks intruded by large bodies of quartz monzonite, granodiorite and gabbro dated at between 1,750 and 1,690 Ma. The basement rocks are locally overlain by Mississippian limestone or by Pennsylvanian and Permian redbeds. The basement rocks were thrust eastward across a thick section of similar late Paleozoic rocks along low-angle faults during the Laramide Orogeny. Post-Laramide erosion largely removed the sedimentary cover from the basement rocks and reduced the topography to a low-relief surface locally overlain by scattered lenses of Eocene to Oligocene shale, sandstone, and conglomerate. It was on this surface that the earliest rocks of the Latir Volcanic Field were deposited, beginning in the Oligocene, about 30 Ma. The early volcanic rocks comprise a thick sequence of andesite, dacite, and minor rhyolite, deposited as flows, breccia, and volcaniclastic sediments from numerous local volcanic centers; thin layers of rhyolite tuff are from distant eruptions, some probably in the San Juan Mountains. These volcanic rocks probably record early growth of an upper-crustal batholith. At 25 Ma enormous eruptions of peralkaline rhyolite ash-flow tuff were accompanied by collapse of the roof of the growing batholith to form the Questa Caldera, a volcanic depression at least 14 km across. The ash flows traveled for tens of kilometers from the caldera rims to form a widespread sheet of densely welded tuff; ash also fell back to fill the subsiding caldera depression. Concurrent extension along northwest-trending faults segmented the volcanic edifice and rotated the originally sub-horizontal layers, so that some are nearly vertical. Formation of the caldera was accompanied by further batholith growth, involving intrusion of large plutons of granite, granodiorite, and related rocks into both caldera fill and the adjacent rocks, including both the earlier volcanic rocks and the basement rocks. The large molybdenum deposit along the Red River east of Questa is related to the emplacement of one of these late granitic plutons. Intrusive activity continued into the Miocene. Development of the Rio Grande Rift beginning at about 15 Ma was accompanied by development of the north-south trending normal faults along the western foot of the Taos Range. The rift is filled with thousands of meters of clastic sediments interleaved with basalt flows, some as young as 3.6 Ma. The bounding faults of the rift cut the Questa Caldera so that the western part of the original structure is now deeply buried beneath the rift fill.

New Mexico↗
USGS2003

Geologic map of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana

This data set maps and describes the geology of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana. The bedrock geology of the Bonners Ferry quadrangle consists of sedimentary, metamorphic, and granitic rocks ranging in age from Middle Proterozoic to Eocene. Bedrock units include rocks of (1) the Middle Proterozoic Belt Supergroup (2) the Middle Proterozoic Deer Trail Group, (3) the Late Proterozoic Windermere Group, (4) miogeoclinal or shelf facies lower Paleozoic rocks, and (5) Mesozoic and Tertiary granitic rocks. The Belt Supergroup, a thick sequence of argillite, siltite, quartzite, and impure carbonate rocks up to 9,000 m thick, occurs in two non-contiguous sequences in the quadrangle: (1) the Clark Fork-Eastport Sequence east of the Purcell trench and (2) the Newport Sequence in the hanging wall of the Newport Fault. Only the two lowest Belt formations of the Newport Sequence are found in the Bonners Ferry quadrangle, but these two units are part of a continuous section, which extends southwestward to the town of Newport. Belt Supergroup rocks of the Clark Fork-Eastport Sequence are separated from those of the Newport Sequence by the Newport Fault, Priest River Complex, and Purcell Trench Fault. Some formations of the Belt Supergroup show differences in thickness and (or) lithofacies from one sequence to the other that are greater than those predicted from an empirical depositional model for the distances currently separating the sequences. These anomalous thickness and facies differences suggest that there has been a net contraction along structures separating the sequences despite Eocene extension associated with emplacement of the Priest River Complex. In addition to these two Belt sequences, probable Belt rocks are present in the Priest River Complex as high metamorphic grade crystalline schist and gneiss. Northwest of the Newport Sequence of Belt Supergroup is the Deer Trail Group, a distinct Middle Proterozoic sequence of argillite, siltite, quartzite, and carbonate rocks lithostratigraphically similar to the Belt Supergroup, but separated from all Belt Supergroup rocks by the Jumpoff Joe Fault. Rocks of the Deer Trail Group are pervasively phyllitic and noticeably more deformed than rocks in the Belt Supergroup sequences. Lithostratigraphically the Deer Trail Group is equivalent to part of the upper part of the Belt Supergroup. Differences in lithostratigraphy and thickness between individual Deer Trail and Belt units and between the Deer Trail and Belt sequences as a whole indicate that they were probably much farther apart when they were deposited. The Windermere Group is a lithologically varied sequence of volcanic rocks and coarse-grained, mostly immature, clastic sedimentary rocks up to 8,000 m thick. It is characterized by extreme differences in thickness and lithofacies over short distances caused by syndepositional faulting associated with initial stages of continental rifting in the Late Proterozoic. Strata of the Windermere Group unconformably overlie only the Deer Trail Group, and are nowhere found in depositional contact with Belt Supergroup rocks. Paleozoic rocks in the Bonners Ferry quadrangle consist of a thin, fault-bounded remnant preserved within the Clark Fork-Eastport Belt Supergroup Sequence. Mesozoic granitic rocks underlie at least 50 percent of the Bonners Ferry quadrangle. They fall into two petrogenetic suites, hornblende-biotite plutons and muscovite-biotite (two-mica) plutons, most of which are Cretaceous in age. Both suites are represented in the mid-crustal Priest River Complex and in the higher level plutons that flank the complex; by far the majority of the Priest River Complex are Cretaceous, two-mica bodies. Tertiary rocks are restricted to a single small stock, numerous hypabyssal dikes that are too small to show at the scale of the map, and to cataclastic rocks related to the Newport Fault. Quaternary deposits include unconsolidated to poorl

Miscellaneous Field Studies Map↗
USGS1977

Bedrock geologic map of the southern part of the Diorite and Champion 7 1/2 minute quadrangles, Marquette County, Michigan

This map illustrates the bedrock geology of part of the Marquette iron range in the Diorite and Champion 7 ½-minute quadrangles. The area includes part of the Marquette trough, a synclinorium containing rocks of the Marquette Range Supergroup (Precambrian X) and older Precambrian W basement gneiss. Among the Precambrian X rocks is the economically important banded iron-formation, and the oldest rocks of the Precambrian W gneiss consist of a mafic-ultramafic volcanic-intrusive complex that contains gold deposits.

Michigan↗
USGS1971

Geologic map of the Oppolzer A region of the Moon Lunar Orbiter Site II P-8, Sinus Medii including Apollo landing sites 3 and 3R

The map shows the regional geology of the Oppolzer A region of the moon, where potential Apollo landing site s 3 and 3R are located. Site 3R includes a prominent mare ridge and is of greater scientific interest (Trask, 1969). The Oppolzer A region is in Sinus Medii , near the center of the lunar earthside hemisphere; it is als o important because surve yor VI successfully landed near the proposed Apollo landing areas. Sinus Med ii is a relatively small, densely cratered mare surrounded by terra plains and sculptured terra ( Wilhelms , 1968). The geology of the region is dominated by a rela tively high density of individual craters and crater clusters. Most of the craters are less than 800 meters in diameter and appear to be of secondary and primary impact origin.

IMAP↗
USGS2010

Geologic map of the White Hall quadrangle, Frederick County, Virginia, and Berkeley County, West Virginia

The White Hall 7.5-minute quadrangle is located within the Valley and Ridge province of northern Virginia and the eastern panhandle of West Virginia. The quadrangle is one of several being mapped to investigate the geologic framework and groundwater resources of Frederick County, Va., as well as other areas in the northern Shenandoah Valley of Virginia and West Virginia. All exposed bedrock outcrops are clastic and carbonate strata of Paleozoic age ranging from Middle Cambrian to Late Devonian. Surficial materials include unconsolidated alluvium, colluvium, and terrace deposits of Quaternary age, and local paleo-terrace deposits possibly of Tertiary age. The quadrangle lies across the northeast plunge of the Great North Mountain anticlinorium and includes several other regional folds. The North Mountain fault zone cuts through the eastern part of the quadrangle; it is a series of thrust faults generally oriented northeast-southwest that separate the Silurian and Devonian clastic rocks from the Cambrian and Ordovician carbonate rocks and shales. Karst development in the quadrangle occurs in all of the carbonate rocks. Springs occur mainly near or on faults. Sinkholes occur within all of the carbonate rock units, especially where the rocks have undergone locally intensified deformation through folding, faulting, or some combination.

Virginia, West Virginia↗
USGS1972

Reconnaissance geologic map of the west half of the Solomon quadrangle, Alaska

The Solomon quadrangle adjoins the Bering Sea east of Nome, Alaska. It has a common west border with the Nome quadrangle (Sainsbury and others, 1972b) and a common north border with the Bendeleben 1:250,000- scale quadrangle. Part of the area was mapped by Smith (1910), who discussed the rocks in some detail. The rocks mapped by Smith were remapped in 1971 along with the unmapped part of the west half of the Solomon quadrangle. Maps covering half the area of the present report have been issued in preliminary form at a scale of 1:63,360 (Sainsbury and others, 1972, 1972a). Consequently, only a brief text accompanies this map. The east half of the Solomon quadrangle has been mapped by Thomas P. Miller, U.S. Geological Survey (unpublished). Mapping techniques of the various workers led to different maps and results; hence the map of the west half is presented only in preliminary form- a final compilation of the entire Solomon quadrangle may incorporate changes.

Alaska↗
USGS2009

Rock slope stability analysis along the North Carolina section of the Blue Ridge Parkway: Using a geographic information system (GIS) to integrate site data and digital geologic maps

In 2008, the North Carolina Geological Survey (NCGS) completed a five-year geologic and geohazards inventory of the 406-km long North Carolina segment of the Blue Ridge Parkway (BRP). The ArcGIS™ format deliverables for rock slopes include a slope movement and slope movement deposit database and maps and site-specific rock slope stability assessments at 158 locations. Database entries for known and potential rock slope failures include: location data, failure modes and dimensions, activity dates and levels, structural and lithologic data, the occurrence of sulfide minerals and acid-producing potential test results. Rock slope stability assessments include photographs of the rock cuts and show locations and orientations of rock data, seepage zones, and kinematic stability analyses. Assigned preliminary geologic hazard ratings of low, moderate and high indicate the generalized relative probability of rock fall and/or rock slide activity at a given location. Statistics compiled based on the database indicate some general patterns within the data. This information provides the National Park Service with tools that can aid in emergency preparedness, and in budgeting mitigation, maintenance and repair measures.

Conference Paper↗
USGS2020

Bedrock geologic map of the Springfield 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the 7.5- by 15-minute Springfield quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the eastern side of the Chester dome. The Moretown slice structurally overlies the Chester dome along the Keyes Mountain thrust fault which represents the Ordovician Taconic suture (Red Indian Line) between Laurentian and Ganderian crust. The allochthonous Cambrian through Ordovician Moretown slice includes the Moretown and Cram Hill Formations and the North River Igneous Suite. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the Moretown slice. Ordovician to Silurian and Devonian metasedimentary and meta-igneous rocks of the New Hampshire sequence structurally overlie the CVT along the Devonian, Acadian Monroe thrust fault. The oldest part of the New Hampshire sequence consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Bronson Hill arc including the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The Ammonoosuc Volcanics are the base of the exposed arc section in the map area. The Bronson Hill arc rocks are exposed in fault-bounded structural belts, including the Monroe thrust sheet, the Claremont belt, the Sugar River and Unity domes, and the footwall of the Brennan Hill thrust fault. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the Bronson Hill arc rocks. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Devonian, Acadian F 1 fold nappes have a sheath fold geometry and are truncated by multiple generations of faults. The Bronson Hill arc structurally overlies the CVT along the Acadian Monroe fault with preserved tectonic mélange in the footwall. Upright dome-stage F 2 folds post-date amphibolite facies metamorphism and locally developed into sheath folds in high-strain zones. F 3 folds exhibit sinistral rotation associated with Alleghanian lower-greenschist facies faults. Late Paleozoic Alleghanian to Mesozoic shear zones transpose stratigraphy, early structures, and peak metamorphic isograds. 40 Ar/ 39 Ar white-mica growth ages (300–250 million years before present [Ma]) indicate that retrograde deformation continued into the latest Paleozoic and earliest Mesozoic. Apatite fission track data show that brittle faults were active prior to about 100 Ma and experienced Late Cretaceous and even Paleocene re-activation. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Springfield 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, and structural geologic information. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references cited, two cross sections from the geologic map on sheet 1, a tectonic map showing major structural features, and a structural domain map showing the orientation of brittle features.

New Hampshire, Vermont↗
USGS2023

Geologic map of the source region of Shalbatana Vallis, Mars

Xanthe Terra is a high-standing cratered plain located southeast of Lunae Planum and south of Chryse Planitia in the western equatorial region of Mars. It contains landforms shaped by diverse geologic processes, including various scales of channels and valleys, chaotic terrains, delta fan deposits, and landslides. An extensive outflow channel system is located within Xanthe Terra and the surrounding circum-Chryse region, including Shalbatana and Ravi Valles, thought to have formed by catastrophic flooding during the Hesperian to Amazonian Periods. The study region within Xanthe Terra is defined by Mars Transverse Mercator (MTM) quadrangles 00042 and 00047 (2.5° to −2.5° N, 310° to 320° E) and includes Orson Welles crater (124.5 km diameter, the source region for Shalbatana Vallis), the southernmost portion of Shalbatana Vallis, Aromatum Chaos (the source region for Ravi Vallis), the westernmost portion of Ravi Vallis, and the source area of Nanedi Valles. The Mars Odyssey Thermal Emission Image System (THEMIS) IR daytime mosaic (100 m/pixel) was used as the primary base map. We constructed the geologic map of the source region of Shalbatana Vallis at 1:750,000 scale. We defined 16 geologic units in the map area, which we divided into the following groups: plains units, channel units, crater units, chaos units, flow units, and surficial units. Mapped linear features include ridge crests, scarp crests, channels, crests of crater rims, crests of buried or degraded crater rims, graben traces, grooves, troughs, and faults. Surface features include secondary crater chains and dark ejecta material. The geologic history of the map region can be summarized as follows. During the Noachian Period, ancient highland materials in the Xanthe Terra region, including lava and any ancient sedimentary units present, were reworked by impacts during the heavy bombardment. In particular, the impact that formed a basin that later underwent widespread resurfacing, likely as a combination of lava flows, reworked crater materials, and sedimentary deposits resulting in the flat-lying, smooth plains of Chryse Planitia. The Hesperian Period was characterized by the impact that formed Orson Welles crater and the subsequent formation of Shalbatana Vallis, as well as Aromatum Chaos and Ravi Vallis. During this period, depressions were filled with smooth material that was subsequently modified by collapse, subsidence, and flooding. Water filled and overflowed the tops of Orson Welles crater and other depressions. The Amazonian Period was characterized by ongoing collapse, as well as the formation of flow and surficial materials, including a lava flow that extends from Aromatum Chaos.

Scientific Investigations Map↗
USGS2018

Geologic map of the Nepenthes Planum Region, Mars

This map product contains a map sheet at 1:1,506,000 scale that shows the geology of the Nepenthes Planum region of Mars, which is located between the cratered highlands that dominate the southern hemisphere and the less-cratered sedimentary plains that dominate the northern hemisphere. The map region contains cone- and mound-shaped landforms as well as lobate materials that are morphologically similar to terrestrial igneous or mud vents and flows. This map is part of an informal series of small-scale (large-area) maps aimed at refining current understanding of the geologic units and structures that make up the highland-to-lowland transition zone. The map base consists of a controlled Thermal Emission Imaging System (THEMIS) daytime infrared image mosaic (100 meters per pixel resolution) supplemented by a Mars Orbiter Laser Altimeter (MOLA) digital elevation model (463 meters per pixel resolution). The map includes a Description of Map Units and a Correlation of Map Units that describes and correlates units identified across the entire map region. The geologic map was assembled using ArcGIS software by Environmental Systems Research Institute ( http://www.esri.com ). The ArcGIS project, geodatabase, base map, and all map components are included online as supplemental data.

Scientific Investigations Map↗
USGS2009

A method for creating a three dimensional model from published geologic maps and cross sections

This brief report presents a relatively inexpensive and rapid method for creating a 3D model of geology from published quadrangle-scale maps and cross sections using Google Earth and Google SketchUp software. An example from the Green Mountains of Vermont, USA, is used to illustrate the step by step methods used to create such a model. A second example is provided from the Jebel Saghro region of the Anti-Atlas Mountains of Morocco. The report was published to help enhance the public's ability to use and visualize geologic map data.

Vermont↗
USGS2013

Bedrock geologic map of the Nashua South quadrangle, Hillsborough County, New Hampshire, and Middlesex County, Massachusetts

The bedrock geology of the 7.5-minute Nashua South quadrangle consists primarily of deformed Silurian metasedimentary rocks of the Berwick Formation. The metasedimentary rocks are intruded by a Late Silurian to Early Devonian diorite-gabbro suite, Devonian rocks of the Ayer Granodiorite, Devonian granitic rocks of the New Hampshire Plutonic Suite including pegmatite and the Chelmsford Granite, and Jurassic diabase dikes. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing hydrogeologic characterization of the fractured bedrock of Massachusetts and New Hampshire. This report presents mapping by G.J. Walsh and R.H. Jahns and zircon U-Pb geochronology by J.N. Aleinikoff. The complete report consists of a map, text pamphlet, and GIS database. The map and text pamphlet are only available as downloadable files (see frame at right). The GIS database is available for download in ESRI TM shapefile and Google Earth TM formats, and includes contacts of bedrock geologic units, faults, outcrops, structural geologic information, photographs, and a three-dimensional model.

Massachusetts, New Hampshire↗