USGS Science⌕ Search

SEARCH · USGS Science

Results for “Annual Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

778 records · Page 39Linked to original sources
USGS2026

Geochemical geodatabase of sedimentary strata (coal, coal-adjacent rocks, tuffaceous oil shale, phosphate-rich rocks) and produced water in the Uinta region, Utah and Colorado

The Geochemical Geodatabase of Sedimentary Strata (Coal, Coal-adjacent Rocks, Tuffaceous Oil Shale, Phosphate-rich Rocks) and Produced Water in the Uinta Region, Utah and Colorado, consists of compiled datasets acquired as part of the Carbon Ore, Rare Earth, and Critical Mineral (CORE-CM) Uinta Region assessment funded by the U.S. Department of Energy (DEFE0032046, 2021–2024; Birgenheier et al., 2024). The CORE-CM assessment focused on providing comprehensive geological and geochemical characterization of current and prospective sedimentary-hosted resources including coal, oil shale, phosphatic limestone, and produced water from oil and gas targets present in eastern Utah and northwestern Colorado (Figure 1). This Data Series includes a geodatabase that consists of analytical geochemical data collected September 2021 through December 2024 via portable X-ray fluorescence (pXRF), and laboratory measured analyses produced by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The coal-related geochemical data are derived primarily from the Cretaceous Blackhawk Formation and Ferron Sandstone of Utah, and the Mesaverde Group of Colorado. Additional non-coal resources assessed include oil shale-bearing strata of the Eocene upper Green River Formation (Utah and Colorado), phosphate-rich limestone of the Permian Park City Formation (Utah) and produced water from oil and gas-bearing strata of the Eocene Green River and Wasatch Formations (Uinta Basin) and the Pennsylvanian Paradox Formation (Paradox Basin) (Table 1). The CORE-CM assessment included a wide range of lithologies present in the coal, oil shale, and phosphate geologic resource systems whether or not the specific lithology has current economic value. Geochemical analyses of produced water from oil and gas wells focused on current and emerging hydrocarbon targets in the central Uinta Basin and northern Paradox Basin. A total of 13,092 geochemical analyses from these geologic systems is provided in the included geodatabase. A series of coal quality data (e.g., composition and maceral analyses) is also included in the database and was digitized from archived coal samples from the Utah Geological Survey (Appendix A).

Colorado, Utah↗
USGS2024

Temporal, spatial, and chemical evolution of Quaternary high-silica rhyolites in the Mineral Mountains, Utah

The Mineral Mountains in southwestern Utah are a structurally controlled core complex at the confluence of the Colorado Plateau and the Basin and Range physiographic provinces. Aside from hosting Utah’s largest batholith, the Mineral Mountains host some of the State’s youngest high-silica rhyolites, which have been linked to a magma source that is presently being utilized as an enhanced geothermal system. The high-silica rhyolites take the form of effusive lavas and domes, and explosive products are rare. Previous K-Ar dating of these Pleistocene rhyolites placed eruptions between about 790 and 500 kilo-annum (ka) with contemporaneous basalts erupting in the valley to the east of the Mineral Mountains. Large uncertainties on these ages obscured the tempo of eruptions and thus hindered attempts to constrain the timescales of the petrogenetic processes that produced the rhyolites. In this study, we build on previous studies conducted in the 1970s and 1980s by using new geochronologic and geochemical data to investigate the temporal and spatial evolution of the youngest phase of volcanism in the Mineral Mountains. We identify two major eruptive periods, from approximately 850 to 750 ka and from approximately 590 to 480 ka. The older phase is characterized by the eruption of several basaltic lavas, two obsidian flows, and a series of coalescing porphyritic rhyolite domes. The younger phase included the eruption of six evolved high-silica rhyolite domes and one pyroclastic deposit, followed by the eruption of trachyandesite in the adjacent valley to the east. Whole-rock geochemical data indicate that the rhyolites can be divided into three chemical groups, with more evolved compositions erupting through time. The youngest rhyolites along the range crest have the lowest total iron and TiO 2 concentrations and the highest incompatible element concentrations, indicative of increasing differentiation with time and elevation. Improved precision on the eruption ages indicates a recurrence interval of approximately 20 thousand years. The eruptive flux for both periods of rhyolitic volcanism is about 0.01 cubic kilometers per thousand years, which is less than the magma resurgence flux rates for syn-caldera and post-caldera eruptions of the Valles Caldera and Yellowstone Caldera volcanic systems. Collectively, these geochemical, geochronological, and volumetric data may facilitate a better understanding of heat flux and the longevity of magmatic sources related to geothermal resources in similar small-volume, silicic systems.

Utah↗
USGS2025

Geologic map of the Buckner 7.5-Minute quadrangle, Louisa County, Virginia

The Buckner 7.5-minute quadrangle straddles three terrane boundaries in the Piedmont Physiographic Province in central Virginia: the Chopawamsic terrane, the Elk Hill Complex, and the Goochland terrane. In much of the map area, the Elk Hill Complex separates the Chopawamsic and Goochland terranes. Rocks of the Chopawamsic terrane include Ordovician metavolcanic and metasedimentary rocks of the Chopawamsic Formation, Ordovician to Silurian granodiorite sheet intrusions, and Paleozoic mafic intrusions. Silurian to Devonian rocks of the Quantico Formation, mostly garnet-mica schist, crop out in the northwesternmost part of the map area, and are in unconformable contact with rocks of the Chopawamsic Formation on the southeastern limb of the Quantico synclinorium. The main map unit in the Elk Hill Complex is Neoproterozoic mica gneiss, which is in pre-metamorphic fault contact with rocks of the Chopawamsic Formation to the west. The main map unit of the Goochland terrane is the Maidens Gneiss. Except for Jurassic diabase dikes, all rocks on the Buckner 7.5-minute quadrangle were metamorphosed to amphibolite facies during the Alleghanian orogeny and preserve multiple compositional and phyllosilicate penetrative foliations. Evidence of amphibolite-facies metamorphism during the Taconic orogeny is preserved in rocks of the Elk Hill Complex. The entire width of the Maidens Gneiss on the Buckner 7.5-minute quadrangle is within the Spotsylvania high-strain zone and amphibolite-facies mylonitic textures are pervasive. Quartz veins and Jurassic diabase dikes crosscut all older rocks of the quadrangle. Multiple levels of terrace deposits are present along and near the major streams of the quadrangle. The lower terrace deposits are likely remnants of former positions of the Little River on the landscape, whereas higher deposits may be remnants of former deposits of the Atlantic Coastal Plain that covered this portion of the Piedmont Province. A linear cluster of aftershocks from the magnitude 5.8 earthquake that occurred near Mineral, Virginia, in 2011 defines the Fredericks Hall fault, which is at depth on the Buckner quadrangle. Most of the aftershocks occurred in the core of the Elk Creek antiform and have no relation to faults mapped at the surface. Several abandoned crushed stone and building stone quarries, as well as a mica prospect, exist in the quadrangle.

Virginia↗
USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗
USGS2026

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin↗
USGS2025

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States↗
USGS2024

Ground deformation and gravity for volcano monitoring

Introduction When magma accumulates or migrates, it can cause pressurization and related ground deformation. Characterization of surface deformation provides important constraints on the potential for future volcanic activity, especially in combination with seismic activity, gas emissions, and other indicators. A wide variety of techniques and instrument types have been applied to the study of ground deformation at volcanoes (sidebar, p. 2; Dzurisin, 2000, 2003, 2007). Geodetic instruments include continuously recording Global Navigation Satellite System (GNSS; of which the United States’ Global Positioning System is one example) stations (fig. D1), borehole tiltmeters, and interferometric synthetic aperture radar (InSAR) measurements (from satellites, occupied and unoccupied aircraft systems, and ground-based sensors). Additional geodetic measurements like continuous- and survey-mode gravity (fig. D2) can contribute substantially to interpreting these data. Borehole strainmeters (see chapter K , this volume, by Hurwitz and Lowenstern, 2024) also have outstanding utility for monitoring deformation, although because of cost and permitting challenges, we do not include them as part of standard volcano monitoring networks for U.S. volcanoes. Still other techniques like light detection and ranging (lidar), structure from motion, and optical satellite data can be used to derive gross topographic changes, which can be used to map volcanic deposits, infer eruption rates, and gain insights into the source processes associated with eruptive activity (see chapter G , this volume, on tracking surface changes caused by volcanic activity; Orr and others, 2024). Experience has shown that no single geodetic monitoring technique is adequate to detect and track the entire range of ground-motion patterns that occur at volcanoes, primarily because of the temporal and spatial diversity of volcano deformation (fig. D3). Similarly, the magnitude of surface deformation varies widely. Geodetic monitoring strategies should therefore include multiple techniques and instrument types to cover a wide range of spatial and temporal scales. In identifying recommendations for geodetic instrumentation for volcano monitoring networks, we attempted to maximize the diversity of instrument types to measure the full range of deformation signals and minimize their expense and number; thus, we do not include several well-known deformation-monitoring techniques in our recommendations. Extensometers, for example, measure strains over distances of a few meters and have an excellent record of success in detecting changes in preeruptive localized ground motion across existing cracks, including at Mount St. Helens, Washington (Iwatsubo and others, 1992), and Piton de la Fournaise, Réunion Island (Peltier and others, 2006). Despite being relatively inexpensive, extensometers are best used primarily when localized ground displacements (for example, ground cracks) need to be tracked, and are not necessary at all volcanoes. In considering volcano deformation monitoring strategies, two complicating factors are deserving of special attention. First, not all deformation is driven by subsurface magmatic activity—for example, at many large stratovolcanoes (for example, Mount Rainier), flank collapses and landslides are significant geologic hazards (Reid and others, 2001) that may occur even in the absence of magmatic activity. Monitoring the stability of volcanoes is thus another critical application of geodetic monitoring networks to inform hazard assessment. One of the most famous examples of edifice instability is the large flank collapse that initiated the May 18, 1980, eruption of Mount St. Helens. Deformation monitoring had detected a bulge on the north flank of the mountain in April 1980 that was expanding by several meters per day (Lipman and others, 1981). Given that flank collapses can happen at any time during a period of volcanic unrest (or even outside a period of unrest), the capability to assess edifice stability is critical. Second, although volcanoes are commonly treated as idealized structures that erupt from single points, like centralvent stratovolcanoes, many are characterized by long rift zones from which eruptions may originate, and distributed volcanic fields are characterized by broadly spaced vents. For example, linear dikes are common at Kīlauea, Mauna Loa, and between Mount Shasta and Medicine Lake in California. At Kīlauea, one of these linear dikes emerged more than 40 kilometers (km) away from the summit of the volcano during the lower East Rift Zone eruption in 2018. Other volcanic fields, like Lassen volcanic center, California, or the San Francisco Volcanic Field, Arizona, have many small vents spread over a wide area. Although the instrumentation guidelines presented in this chapter remain phrased for central-vent volcanoes, they should be modified as needed in the context of the eruptive characteristics of each individual volcanic system. Spatial analysis of geodetic network coverage could help to ensure adequate instrumentation in areas where volcanism can occur over a broad area as opposed to a central vent. As an example, consider the adjacent volcanoes Mount Shasta and Medicine Lake. If station locations are chosen based only on the distance from the centers of the volcanoes, then any geodetic anomalies between the two volcanoes—an area of potential volcanism as indicated by the presence of volcanic features—may remain undetected by ground-based instrumentation. The spatial analysis is accomplished via a grid of pressure point sources (Mogi, 1958) evenly distributed across the map area, at a depth of 5 km in this example (fig. D4). Each source is inflated until predicted deformations exceed the GNSS white noise uncertainty estimates at one site (Langbein, 2017; Murray and Svarc, 2017). This volume of detectable magma provides a measure of the quality of the coverage (fig. D4). The results indicate that, as of 2022, there is a large area between Mount Shasta and Medicine Lake volcano with existing mapped dikes in which a substantial amount of magma could intrude without being detected geodetically. Applying this style of analysis to individual volcanic systems can provide a guide for designing network geometry given the expected locations of future eruptions.

Scientific Investigations Report↗
USGS2024

Evidence of nitrate attenuation in intertidal and subtidal groundwater in a subterranean estuary at a Cape Cod embayment, East Falmouth, Massachusetts, 2015–16

Nitrogen dynamics in intertidal and nearshore subtidal groundwater (subterranean estuary) adjacent to the Seacoast Shores peninsula, Falmouth, Massachusetts, were investigated during 2015–16 by the U.S. Geological Survey. The peninsula is a densely populated residential area with septic systems and cesspools that are substantial sources of nitrogen to groundwater. The study area is in the Eel River, an estuarine saltwater embayment connected to the ocean adjacent to the western shore of the peninsula, that was the subject of an earlier study by Colman and others (2018, https://doi.org/10.3133/sir20185095 ) on nitrogen transport and transformations in groundwater between onshore and offshore locations. The previous study documented the distribution of nitrate concentrations and nitrate attenuation reactions in fresh groundwater beneath the peninsula and the estuary. The current study extended those observations with more detailed sampling and analysis of shallow groundwater from wells near discharge sites beneath the estuary. The current field investigation included sampling of existing wells and installation and sampling of clusters of wells and temporary sampling points in the subterranean estuary, including (1) shallow transects 0.3 to 1.2 meters (m) deep extending from 1 to 13.5 m offshore and (2) deeper wells (from 1.83 to 4.88 m deep) extending from 4.3 to 14.3 m offshore. Measurements of hydraulic-head gradients 2–5 m below the sediment/water interface in the intertidal and nearshore subtidal zones indicated that groundwater flow generally was upwards (towards the estuary) under all tide conditions in October 2016. The magnitude of the gradient was greatest during low tide conditions, indicating that groundwater discharge likely decreased during high tides. Measurements of specific conductance in shallow groundwater in the subterranean estuary in three transects perpendicular to shore were consistent with the existence of saltwater flow cells (infiltration of overlying saline water, mixing with fresh groundwater, and discharge to the overlying saline water) in the intertidal and nearshore subtidal regions. The size of these flow cells was variable in space and time and dependent on the elevation of the tide (spring or neap). At this location in the Eel River subterranean estuary, and offshore to at least 13.5 m, offshore flow of fresh groundwater apparently prevented a deeper saltwater wedge from discharging to the surface. Nitrate concentrations in shallow groundwater (30 to 122 centimeters [cm] depth) were variable in space and time, ranging from not detectable to 600 micromoles per liter (μmol/L) (8.4 milligrams per liter as N), and were highest in June 2016 at depths from 61 to 122 cm below the sediment/water interface and from 4 to 9 m offshore. Nitrate generally was not detectable in saline shallow groundwater at 30-cm depth or at any depth from 30 to 122 cm from 10 to 13.5 m offshore. Dissolved oxygen concentrations were suboxic (less than 16 μmol/L) in 60 percent of the sampled subterranean groundwater beneath the intertidal and subtidal zones. In the remaining sites, the range of dissolved oxygen concentrations was from 18 to 272 μmol/L and the median concentration was 43 μmol/L. Evidence for microbial nitrate reduction (denitrification and possibly anammox) was provided by the distribution of the reaction product nitrogen gas (excess N 2 , or N 2MIC ), as determined from analysis of the dissolved nitrogen gas and argon gas (Ar) concentrations in groundwater samples. Excess nitrogen gas provided evidence for nitrate reduction in shallow groundwater below the subtidal and, to a lesser extent, intertidal zones adjacent to the Seacoast Shores peninsula. These zones, where evidence for nitrate reduction was detected, were in fresh and brackish groundwater near subtidal or intertidal saltwater cells where discharging fresh groundwater mixed with infiltrating saline water. Infiltrating seawater may have supplied organic carbon, one of several potential electron donors that are required for denitrification. Other potential electron donors, such as organic carbon, iron, manganese, hydrogen, methane, ammonium, elemental sulfur, or sulfide phases, may have been supplied by the estuarine sediments. Drainage from surface runoff near the shore also may have supplied organic carbon to fresh groundwater near the intertidal saltwater cell. The highest amounts of nitrate converted to excess nitrogen gas were estimated to be in the range of 230 to 430 μmol/L in nearly fresh groundwater near the subtidal saltwater cell at depths of 61 to 122 cm below the sediment/water interface and from 10 to 13.5 m offshore. Evidence of denitrification within 10 m of the shore was sparse (generally limited to less than 50 μmol/L of N 2 -N) despite the presence of high nitrate concentrations. The spatial distribution of estimated nitrate reduction in the intertidal and nearshore subtidal fresh and brackish groundwater may be related to local variability in the distribution of reactive electron donors in those zones. Variations in the amount of nitrate reduction to nitrogen gas were not clearly related to potential aqueous electron donors such as dissolved organic carbon, nor to potential reaction products such as alkalinity, but may have been controlled by combinations of aqueous and solid-phase reactants. The distribution of relatively shallow fresh groundwater containing nitrate could indicate potential nitrate discharge areas in the lower intertidal zone and uncertain locations farther offshore; however, the data did not extend all the way to the sediment/water interface or to the offshore freshwater limit. This study confirmed substantial loss of nitrate from some of the fresh and brackish groundwater in shallow subestuarine sediments prior to discharge but did not quantify how much nitrate eventually discharged to the estuary.

Massachusetts↗
USGS2025

Spatio-temporal evolution of distributed volcanic fields, case studies—Sierra Chichinautzin and Michoacán-Guanajuato, México

An analysis of 1,375 volcanoes in the Michoacán-Guanajuato (1,148 volcanoes in a 26,200 square-kilometer area) and Sierra Chichinautzin (227 volcanoes in a 3,500 square-kilometer area) volcanic fields in central Mexico identified patterns in the spatial and temporal distribution of past eruptions. A cluster agglomerative hierarchical method and kernel analysis confirmed that the Michoacán-Guanajuato volcanic field comprises four volcanic fields (Valle de Santiago, Uruapan, Apatzingán, and Pátzcuaro volcanic fields) controlled by different fault systems, indicating that it is not a single volcanic field but rather a group of volcanic fields (a “superfield”), each of which has distinct characteristics. In the Sierra Chichinautzin volcanic field, well-constrained isotopic ages were used to build a model of how the spatial distribution of the eruptions has changed over time. Two new 40Ar/39Ar ages from a locally recognized volcanic feature near the town of El Cantil, herein called El Cantil volcano (1,537±17 kilo-annum [ka]) and the volcanic feature at Cerro el Elefante (herein called El Elefante dome) (1,485±92 ka) belong to the oldest volcanic group identified in the Sierra Chichinautzin volcanic field, confirming the timing of the beginning of monogenetic volcanism in the region. Based on the volcanic groups identified in the Sierra Chichinautzin volcanic field, the youngest volcanism (less than 35 ka) is found only in the central-western sector of the field. Principal component analysis determined the directional trends of feeder dikes only for vents <10 ka in the Sierra Chichinautzin volcanic field. Possible magma migration paths through the crust were identified using seismic data from both volcanic fields using an earthquake catalog from 1973 to 2023, which includes 9,016 earthquakes in the Michoacán-Guanajuato volcanic field and 841 in the Sierra Chichinautzin volcanic field. The spatial distribution of the hypocenters does not highlight any trend that could be associated with superficial movement of magma in the Sierra Chichinautzin volcanic field. In the Michoacán-Guanajuato volcanic field, however, eight seismic swarms since 1997 have been detected. These swarms are interpreted to result from ascending magma. Strengthening monitoring systems and reinforcing mitigation measures to address volcanic hazards and risk are important means of preparing for future eruptions in both regions. Analysis such as those herein provide insights as to where an eruption might occur and may help mitigate volcanic hazards.

Michoacán-Guanajuato, Sierra Chichinautzin↗
USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund Site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

EarthArXiv↗
USGS2024

Generalized potentiometric maps of the Fort Union, Hell Creek, and Fox Hills aquifers within the Standing Rock Reservation

Generalized potentiometric surfaces of the Fort Union, Hell Creek, and Fox Hills aquifers were constructed to assess the groundwater resources of the Standing Rock Reservation. Additionally, this information can provide water managers with tools and data to effectively manage water resources in the future. Previous studies that mapped the geology and hydrogeology of the area at differing scales were used to confirm in which aquifer the study wells were completed. Water-level data from wells are provided by the U.S. Geological Survey Groundwater System Inventory database, the South Dakota Department of Agriculture and Natural Resources, and the North Dakota Department of Water Resources. Hydrographs were constructed for five selected observation wells to evaluate historical water-level fluctuations and trends. Hydrographs for the Hell Creek aquifer showed a flat trend with a rise in 2020. Hydrographs for the deeper Fox Hills aquifer showed that water levels fluctuated in response to climatic conditions and demonstrated an increasing trend in water-level elevations starting in 2010. Hydrographs were not constructed for any wells completed in the Fort Union Formation because none of the wells had continuous long-term measurements. Generalized potentiometric surfaces, constructed from interpolating water-level elevations, gave insight into groundwater flow directions. Groundwater in the Fort Union aquifer likely flows radially outward from the northwest part of the study area to the northeast and south-southeast parts. Groundwater in the Hell Creek aquifer generally flows from higher elevations in the northwest towards lower areas, where surface-water tributaries have incised into the aquifer. Groundwater in the Fox Hills aquifer likely flows from higher elevations in the west, southwest, and central parts of the study area towards the valleys of the Grand River and Missouri River. Most wells used for constructing potentiometric maps had only one recorded water-level measurement from drillers at the time of well construction. These measurements are often subject to error because the well is still recovering and because of spatial limitations of data availability. Also, because single water-level measurements were recorded at different points in time, additional uncertainty is introduced by fluctuating climatic conditions effect on water levels. Potentiometric map interpretation limitations are a result of areas with sparse data. Limitations also arise from potentiometric surfaces generalizing a complex and dynamic hydrogeologic system; however, the generalized potentiometric surface maps can be used to assist water managers and can help prioritize locations for future monitoring in areas with high uncertainty from sparse existing data.

North Dakota, South Dakota↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2026

Water-withdrawal and groundwater-level fluctuations, physical and infiltration characteristics of Ohio River sediment, and isotope-based estimates of water sources relative to a riverbank filtration system in an alluvial aquifer, Louisville, Kentucky, 2000–20

The U.S. Geological Survey and the Louisville Water Company, from 2000 to 2020, cooperatively investigated physical and hydrologic conditions in the Ohio River alluvial aquifer and adjacent riverbed sediments in the northeast part of Louisville, Kentucky, to increase knowledge of processes affecting water sources to collector wells during operation of a riverbank filtration system (RBF). The RBF, in 2020, included an initial collector well (CW1) completed in 1999 and a tunnel and collector well system (TCWS) composed of four collector wells (CW2–CW5) completed in late 2010 that were connected by a tunnel that routed water to a pumping station and a treatment plant. Daily mean water-withdrawal rates typically ranged from about 10.4 to 20.7 million gallons per day (Mgal/d) from 2005 to 2007, then were cyclic from 2008 to 2010 and ranged from as low as about 9 to 13 Mgal/d in winter-spring months up to about 19 to 20 Mgal/d in summer-autumn months. From 2011 through 2017, peak daily mean water-withdrawal rates from CW2–CW5 fluctuated between winter-spring lows of about 20–30 Mgal/d to summer-autumn peak rates of about 41.6 Mgal/d in 2013 to about 48.2 Mgal/d in 2012. From 2017 to 2020, TCWS peak daily mean water-withdrawal rates decreased from about 45.7 Mgal/d in 2017 to about 37.5 Mgal/d in 2020 and peak daily mean rates from CW1 ranged from about 20.7 Mgal/d in 2020 to about 21.6 Mgal/d in 2018. Periods in 2019–20 with tunnel pumping station daily mean water-withdrawal rates smaller than about 30 Mgal/d had generally stable water levels in CW2 and indicated the sustainable yield of the TCWS collector wells under the prevailing hydrologic conditions. Drawdown during July–August of 2008 and 2009 was associated with CW1, the sole operating collector well. Groundwater-flow directions outside the CW1 cone of depression during July–August of 2008 and 2009 were from areas near the alluvial valley margin toward the Ohio River and in 2009 toward Harrods Creek. Collector wells CW2 through CW5 derived water during 2011–19 surveys from surface-water infiltration, as indicated by drawdown that extended beneath the Ohio River and Harrods Creek. Increases in drawdown toward the alluvial valley margins in July–August of 2013 and 2015, compared with July 2011, indicated less available recharge from those flow directions and decreased yield of groundwater from the aquifer after progressively longer TCWS water withdrawals. Drawdown at CW2–CW5 and at observation wells between them lessened in October 2019 and indicated that onshore groundwater levels can recover when collector well withdrawals decrease. Overlapping cones of depression in 2011–15 potentiometric surfaces centered around CW2, CW3, CW4, and CW5, and drawdown along divides between those wells indicated well interference between collector wells. Well-interference effects increased during 2013 and 2015 survey periods, despite decreased water-withdrawal rates compared with July 2011, and expanded to include CW1 when its use resumed. Groundwater-level fluctuations in observation wells near the Ohio River were consistent with gradual depletion of groundwater yield during tunnel pumping station operation at river elevations of about 420 feet above the National Geodetic Vertical Datum of 1929 (NGVD 29) and enhanced recharge of the aquifer when river elevations were above flood stage of about 430 feet above NGVD 29. Groundwater-level declines in observation wells near the Ohio River were most apparent in summer and some autumn months between 2012 and 2017 during periods when tunnel pumping station mean daily water-withdrawal rates were about 35 Mgal/d or more. Periods of relatively stable groundwater levels during 2019–20 in observation wells between CW2–CW5, when tunnel pumping station water-withdrawal rates were about 30–33 Mgal/d or less, also indicated that the prevailing sustainable yield was about 30 Mgal/d or less. Wells associated with CW3 and CW4 had the largest increases in slopes of best-fit lines relating water-level difference to water-withdrawal rate between 2012 and 2020, an indication of decreased efficiencies of those wells to supply water or of changes in groundwater yield around the well. Increased slopes of best-fit lines relating water-level difference to water-withdrawal rate from 2019 to 2020, when groundwater levels were otherwise relatively stable, also indicated that the specific capacity of one or more TCWS collector wells may have declined during that period. Riverbed surface elevation, roughness, and hardness changes between hydroacoustic surveys indicated active accretion and erosion of bed sediment offshore from the riverbank filtration system in 2002–4. Riverbed hydraulic conductivity computed from 2013 to 2015 in tests at 11 sites ranged from 0.2 to 230 feet per day. Ten temporary piezometer sites with adjacent operating collector wells had drawdowns that ranged from about 4 to 11.7 feet and hammer blows greater than or equal to 49 counts, which indicated a relatively great density of alluvial sediments and the potential for diminished riverbed infiltration rates. Contributions of Ohio River infiltration to collector wells estimated from deuterium and oxygen-18 isotopic ratios in representative Ohio River and groundwater samples were considerably larger in warmer months than cooler months and ranged from 80–90 percent in CW1–CW5 in May 2020 to 100 percent in May 2019 at CW2, CW4, and CW5. Groundwater contributions to water withdrawals by collector wells increased in cooler autumn months and ranged from 40 percent at CW3 and CW5 in November 2020 to 70 percent at CW2, CW4, and CW5 in November–December 2019. November 2019 and November 2020 isotopic compositions of water from the collector wells had enriched deuterium and oxygen-18 isotopic ratios consistent with mixtures of evaporation-modified water from the Ohio River and meteoric-origin groundwater.

Indiana, Kentucky↗
USGS2024

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California↗
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗
USGS2025

Groundwater hydrology, groundwater and surface-water interactions, water quality, and groundwater-flow simulations for the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado, 2017–19

In 2017, the U.S. Geological Survey, in cooperation with the Upper Arkansas Water Conservancy District, began a study to provide a comprehensive analysis of the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado. The study included collection of data pertaining to groundwater hydrology, groundwater and surface-water interactions, and water quality in the alluvial aquifer. In addition to providing foundational information on the hydrology of the alluvial aquifer, a numerical groundwater-flow model was developed to estimate the potential effects of additional storage of groundwater in the alluvial aquifer. Groundwater-level elevation data from 30 wells were used to estimate groundwater-flow directions in the alluvial aquifer, which were generally from the southwest to northeast, away from the Sangre de Cristo Mountains and towards perennial streams in the center of the valley. Although some seasonal variation was apparent in groundwater-level elevation records, no statistically significant seasonal trends were indicated. Statistically significant long-term trends were indicated in groundwater-level elevation records for 8 of the 30 wells, and of these wells with statistically significant trends, all but 1 indicated a negative trend of groundwater-level elevations. Spatial evaluation of wells with statistically significant negative groundwater-level elevation trends showed many are in areas of denser well drilling for domestic or other uses, indicating increasing groundwater use could potentially be causing groundwater-level elevation declines. There were instances of wells with no statistically significant groundwater-level elevation trends also located in areas of greater density of well completions. Additional investigations may be necessary to more fully characterize the processes responsible for negative groundwater-level elevation trends. Streamflow gain or loss calculations were completed for low flow in 2017–19 and for high flow in 2018 in nine reaches of streams within the study area. Stream reaches of the upper Texas Creek, upper Grape Creek, upper-middle Grape Creek, and Taylor Creek displayed consistent streamflow loss in each period from 2017 to 2019. These stream reaches represent long-term sources of recharge to the alluvial aquifer. Streamflow gain or loss varies through time in other stream reaches (lower Texas Creek, lower-middle Grape Creek, lower Grape Creek below Westcliffe, and lower Grape Creek above DeWeese Reservoir). The temporally variable behavior indicates these stream reaches may be sources of groundwater recharge or areas of groundwater discharge, likely depending on temporal dynamics between the elevation of the water table and the stream. Water-quality samples were collected from 10 groundwater wells and 10 stream sites during September through November 2019. All groundwater and stream samples were analyzed for major and trace elements and stable isotopes of water. A subset of groundwater samples was also analyzed for the environmental tracers sulfur hexafluoride, tritium, and noble gases. Comparison of water-quality results to U.S. Environmental Protection Agency drinking water-quality standards indicated no constituents exceeded primary standards for human health. Spatial evaluation of water quality indicated the concentrations of various constituents are likely controlled by groundwater and surface-water interactions and by spatial variability in bedrock geology underlying the alluvial aquifer. Specifically, streams shown to gain from groundwater had water chemistry constituent compositions similar to groundwater, whereas streams exiting the Sangre de Cristo Mountains tended to have compositions consistent with snowmelt. Groundwater geochemistry appeared to be partially controlled by oxidation-reduction processes and by proximity to igneous rocks in the Wet Mountains. Environmental tracers used to estimate groundwater age indicated all sampled groundwater contained tracers representing modern recharge (approximately less than 65 years old) but mixing of premodern recharge (approximately more than 65 years old) also occurs. Spatial evaluation of environmental tracers indicated large faults may be conduits for upwelling of older groundwater. No trends were observed in groundwater age with well depth, indicating all sampled wells are located within the zone of active groundwater flow. The presence of modern groundwater in wells with statistically significant negative groundwater-level elevation trends indicates groundwater storage depletions may be partially offset by capture of modern recharge. Repeated sampling of groundwater age would be necessary, however, to determine if any trends in groundwater age exist, which may indicate changing groundwater recharge, storage, or discharge. Additional investigations could also consider quantifying groundwater age in deeper wells to more fully define the depth of active groundwater flow. A numerical groundwater-flow model was developed to estimate components of the water budget, simulate groundwater and surface-water interactions, and evaluate the potential effects of aquifer storage and recovery. Simulated groundwater-level elevations from the calibrated groundwater-flow model are similar to the observed pattern of groundwater-level elevations with higher elevations in the western part of the study area along the Sangre de Cristo Mountains. Simulated water-budget components indicate most of the recharge to the alluvial aquifer is derived from streamflow losses, which is consistent with observations of losing streams along the mountain front. The largest groundwater discharge component of the alluvial aquifer was to streams in the center of the valley, where observations of stream gain or loss indicated the predominance of gaining conditions. Comparison of groundwater and surface-water interactions between the calibrated groundwater-flow model for 2000-19 (the base-case model) and a simulation including additional recharge, representing potential aquifer storage and recovery operations, indicated the additional recharge distributed throughout the area had minimal effects on streamflow in the nearby Grape Creek. An analysis of subregional groundwater budgets showed approximately 54 percent of the additional recharge flowed back to nearby Grape Creek, and the other 46 percent was distributed laterally into adjacent cells in the alluvial aquifer. The comparison of simulations and subregional water budget show the additional recharge did not substantially alter groundwater-level elevations or basin wide groundwater storage. Although the analysis of additional recharge provided in the numerical groundwater-flow model considers only one of many possible recharge scenarios, the model provides a useful tool that could be modified for various scenarios to understand potential effects of managed aquifer recharge.

Colorado↗
USGS2025

Geologic map of the Guinevere Planitia quadrangle (V–30), Venus

This 1:5,000,000-scale geologic map of the Guinevere Planitia quadrangle divides the region into 15 geologic material units, defined using Magellan synthetic aperture radar (12.6-centimeter-wavelength radar system; 75 meters per pixel) datasets and including upland terrain units (2.4 percent of the surface area), plains materials units (59 percent), flow materials associated with named and unnamed eruptive centers (37.2 percent), small volcanic edifices, and impact crater materials (1.4 percent). Upland terrain units consist of tessera and lineated upland material, plains materials consist of Guinevere regional plains and Guinevere lineated and mottled plains, and flow materials consist of lobate flow material and plains-forming flow material. Specific lobate flows associated with Atanua Mons, Tuli Mons, Var Mons, and Uilata Fluctus are mapped separately. Other mapped units are impact crater material and small volcanic edifice. In addition to geologic units, we mapped linear features that show patterns of deformation or flow across the quadrangle. These consist of faults, wrinkle ridges, broad arches, channels, troughs, and flow direction indicators. The map region also contains several small volcanic features: shields, depressions, and craters. These, in combination with the plains, large volcanoes, and coronae, show the pervasive influence of volcanism across Venusian lowlands. The rims of nine identified impact features are delineated; large bright and dark haloes, which in some cases are associated with individual impact craters, are mapped as surficial mantling deposits. We documented spatial relationships using the stratigraphic and cross-cutting relationships of the quadrangle’s geologic units and features to provide a synthesis of the region’s geologic history. The upland terrain of the quadrangle indicates intense tectonic deformation and uplift. It is exposed as embayed remnants, typically within the plains, and represents the oldest geologic materials locally and across the region. Guinevere plains and the plains-forming flow unit appear to be assemblages of volcanic flows from multiple sources, including distinct coronae and corona-like structures. The temporal evolution of Guinevere lineated and mottled plains was likely protracted, with continued formation of small volcanic edifices over a long period. The morphologic and radar brightness characteristics of volcanoes in the region indicate their growth may have involved (1) multiple large-scale eruptive centers with recognizable spatial and temporal sequences, (2) extensive lava flow fields with a multitude of flows producing complex, overlapping patterns, and (3) numerous small volcanic edifices, including shields, domes, and cones. Although geologic patterns common to other regions of Venus are evident in the Guinevere Planitia quadrangle, local relative age relationships are inconsistent or unclear, preventing robust stratigraphic correlation. The mapping results do, however, indicate complicated local sequences of volcanic and tectonic activity.

Scientific Investigations Map↗