USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS2008

Tectonic position and geological manifestations of the Mogod (Central Mongolia), January 5, 1967, earthquake (a view after 40 years)

The earthquake source, reaching the surface in the form of an extended system of faults, encompassed the N-S and NW-SE planes of two large faults near their juncture zone. A revised seismotectonic study of the system of coseismic ruptures performed after many years revealed a complex structure of primary coseismic ruptures in the juncture area of fault branches of different directions. In addition to the two major faults, the juncture zone consists of intersecting or parallel branches of both structural directions. The trench study and detailed mapping of the shallow structure of the seismic rupture characterizes it as a right-lateral-thrust fault on the N-S branch and a strike-slip-reverse fault on the NW-SE branch. Results of our paleoseismogeological study indicate that equally strong earthquakes are likely to have occurred in the same seismic source in the past (about 8000 and 160 years ago). ?? Pleiades Publishing, Ltd. 2008.

Izvestiya, Physics of the Solid Earth↗
USGS2000

Isotopic evidence for the sources of Cretaceous and tertiary granitic rocks, east-central Alaska: Implications for the tectonic evolution of the Yukon-Tanana terrane

Magnetotelluric traverses across the southern Yukon-Tanana terrane (YTT) reveal the presence of a thick conductive layer (or layers) beneath Paleozoic crystalline rocks. These rocks have been interpreted to be flysch of probable Mesozoic age, on the basis of the occurrence of Jurassic-Cretaceous flysch in the Kahiltna assemblage and Gravina-Nutzotin belt flanking the YTT to the southwest and southeast, respectively. The Pb, Nd, Sr, and O isotopes in Cretaceous and Tertiary granitic rocks that crop out throughout the YTT were measured to determine if these rocks do in fact contain a component of flysch. Previous limited analyses indicated that the Pb isotopes of the granitic rocks could be a mixture of radiogenic Pb derived from Paleozoic crystalline rocks of the YTT with an increasing component of relatively nonradiogenic Pb with decreasing age. Our Nd, Sr, and O data, along with additional Pb isotope data, eliminate flysch as a likely source and strongly suggest that the nonradiogenic end-member was derived from mafic rocks, either directly from mantle magma or by melting of mafic crust. The lack of a sedimentary component in the granitic plutons suggests either that the plutons did not incorporate significant amounts of flysch during intrusion or that the conductive layer beneath the YTT crystalline rocks is not flysch.

Alaska↗
USGS2006

Proterozoic evolution of the western margin of the Wyoming craton: Implications for the tectonic and magmatic evolution of the northern Rocky Mountains

Defining the extent and age of basement provinces west of the exposed western margin of the Archean Wyoming craton has been elusive because of thick sedimentary cover and voluminous Cretaceous-Tertiary magmatism. U-Pb zircon geochronological data from small exposures of pre-Belt supergroup basement along the western side of the Wyoming craton, in southwestern Montana, reveal crystallization ages ranging from ???2.4 to ???1.8 Ga. Rock-forming events in the area as young as ???1.6 Ga are also indicated by isotopic (Nd, Pb, Sr) signatures and xenocrystic zircon populations in Cretaceous-Eocene granitoids. Most of this lithosphere is primitive, gives ages ???1.7-1.86 Ga, and occurs in a zone that extends west to the Neoproterozoic rifted margin of Laurentia. These data suggest that the basement west of the exposed Archean Wyoming craton contains accreted juvenile Paleoproterozoic arc-like terranes, along with a possible mafic underplate of similar age. This area is largely under the Mesoproterozoic Belt basin and intruded by the Idaho batholith. We refer to this Paleoproterozoic crust herein as the Selway terrane. The Selway terrane has been more easily reactivated and much more fertile for magma production and mineralization than the thick lithosphere of the Wyoming craton, and is of prime importance for evaluating Neoproterozoic continental reconstructions. ?? 2006 NRC Canada.

Canadian Journal of Earth Sciences↗
USGS1999

Trace-element geochemistry of metabasaltic rocks from the Yukon-Tanana Upland and implications for the origin of tectonic assemblages in east-central Alaska

We present major- and trace- element geochemical data for 27 amphibolites and six greenstones from three structural packages in the Yukon-Tanana Upland of east-central Alaska: the Lake George assemblage (LG) of Devono-Mississippian augen gneiss, quartz-mica schist, quartzite, and amphibolite; the Taylor Mountain assemblage (TM) of mafic schist and gneiss, marble, quartzite, and metachert; and the Seventymile terrane of greenstone, serpentinized peridotite, and Mississippian to Late Triassic metasedimentary rocks. Most LG amphibolites have relatively high Nb, TiO2, Zr, and light rare earth element contents, indicative of an alkalic to tholeiitic, within-plate basalt origin. The within-plate affinities of the LG amphibolites suggest that their basaltic parent magmas developed in an extensional setting and support a correlation of these metamorphosed continental-margin rocks with less metamorphosed counterparts across the Tintina fault in the Selwyn Basin of the Canadian Cordillera. TM amphibolites have a tholeiitic or calc-alkalic composition, low normalized abundances of Nb and Ta relative to Th and La, and Ti/V values of <20, all indicative of a volcanic-arc origin. Limited results from Seventymile greenstones indicate a tholeiitic or calc-alkalic composition and intermediate to high Ti/V values (27-48), consistent with either a within-plate or an ocean-floor basalt origin. Y-La-Nb proportions in both TM and Seventymile metabasalts indicate the proximity of the arc and marginal basin to continental crust. The arc geochemistry of TM amphibolites is consistent with a model in which the TM assemblage includes arc rocks generated above a west-dipping subduction zone outboard of the North American continental margin in mid-Paleozoic through Triassic time. The ocean-floor or within-plate basalt geochemistry of the Seventymile greenstones supports the correlation of the Seventymile terrane with the Slide Mountain terrane in Canada and the hypothesis that these oceanic rocks originated in a basin between the continental margin and an arc to the west.

Alaska↗
USGS2011

Chapter 50 Geology and tectonic development of the Amerasia and Canada Basins, Arctic Ocean

Amerasia Basin is the product of two phases of counterclockwise rotational opening about a pole in the lower Mackenzie Valley of NW Canada. Phase 1 opening brought ocean&ndash;continent transition crust (serpentinized peridotite?) to near the seafloor of the proto-Amerasia Basin, created detachment on the Eskimo Lakes Fault Zone of the Canadian Arctic margin and thinned the continental crust between the fault zone and the proto-Amerasia Basin to the west, beginning about 195 Ma and ending prior to perhaps about 160 Ma. The symmetry of the proto-Amerasia Basin was disrupted by clockwise rotation of the Chukchi Microcontinent into the basin from an original position along the Eurasia margin about a pole near 72&deg;N, 165 W about 145.5&ndash;140 Ma. Phase 2 opening enlarged the proto-Amerasia Basin by intrusion of mid-ocean ridge basalt along its axis between about 131 and 127.5 Ma. Following intrusion of the Phase 2 crust an oceanic volcanic plateau, the Alpha&ndash;Mendeleev Ridge LIP (large igneous province), was extruded over the northern Amerasia Basin from about 127 to 89&ndash;75 Ma. Emplacement of the LIP halved the area of the Amerasia Basin, and the area lying south of the LIP became the Canada Basin.

Geological Society, London, Memoirs↗
USGS2017

Tectonic evolution of the Central Andean Plateau and implications for the growth of plateaus

Current end-member models for the geodynamic evolution of orogenic plateaus predict ( a ) slow and steady rise during crustal shortening and ablative subduction (i.e., continuous removal) of the lower lithosphere or ( b ) rapid surface uplift following shortening, which is associated with punctuated removal of dense lower lithosphere and/or lower crustal flow. This review integrates results from recent studies of the modern lithospheric structure, geologic evolution, and surface uplift history of the Central Andean Plateau to evaluate the geodynamic processes involved in forming it. Comparison of the timing, magnitude, and distribution of shortening and surface uplift, in combination with other geologic evidence, highlights the pulsed nature of plateau growth. We discuss specific regions and time periods that show evidence for end-member geodynamic processes, including middle–late Miocene surface uplift of the southern Eastern Cordillera and Altiplano associated with shortening and ablative subduction, latest Oligocene–early Miocene and late Miocene–early Pliocene punctuated removal of dense lower lithosphere in the Eastern Cordillera and Altiplano, and late Miocene–early Pliocene crustal flow in the central and northern Altiplano.

Annual Review of Earth and Planetary Sciences↗
USGS1983

Tectonic evolution of Gulf of Anadyr and formation of Anadyr and Navarin basins

New seismic reflectionand refraction data reveal that Anadyr basin is separated from Navarin basin by Anadyr ridge, a southeast-northwest-trending bedrock high that is characterized by high-amplitude, short-wavelength magnetic anomalies. Anadyr ridge may be an offshore extension of the melange belt underlying the Koryak Range. Sonobuoy refraction data indicate that the velocity profile of strata in East Anadyr trough is similar to that in Navarin basin. Structurally, the basins are different.

Siberia↗
USGS2005

Petrophysics of Lower Silurian sandstones and integration with the tectonic-stratigraphic framework, Appalachian basin, United States

Petrophysical properties were determined for six facies in Lower Silurian sandstones of the Appalachian basin: fluvial, estuarine, upper shoreface, lower shoreface, tidal channel, and tidal flat. Fluvial sandstones have the highest permeability for a given porosity and exhibit a wide range of porosity (2-18%) and permeability (0.002-450 md). With a transition-zone thickness of only 1-6 m (3-20 ft), fluvial sandstones with permeability greater than 5 md have irreducible water saturation (Siw) less than 20%, typical of many gas reservoirs. Upper shoreface sandstones exhibit good reservoir properties with high porosity (10-21%), high permeability (3-250 md), and low S iw (<20%). Lower shoreface sandstones, which are finer grained, have lower porosity (4-12%), lower permeability (0.0007-4 md), thicker transition zones (6-180 m [20-600 ft]), and higher S iw. In the tidal-channel, tidal-flat, and estuarine facies, low porosity (average < 6%), low permeability (average < 0.02 md), and small pore throats result in large transition zones (30-200 m; 100-650 ft) and high water saturations. The most favorable reservoir petrophysical properties and the best estimated production from the Lower Silurian sandstones are associated with fluvial and upper shoreface facies of incised-valley fills, which we interpret to have formed predominantly in areas of structural recesses that evolved from promontories along a collisional margin during the Taconic orogeny. Although the total thickness of the sandstone may not be as great in these areas, reservoir quality is better than in adjacent structural salients, which is attributed to higher energy depositional processes and shallower maximum burial depth in the recesses than in the salients. Copyright ??2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS1967

Stratigraphic and tectonic framework of Libya

Libya is situated on the Mediterranean foreland of the African shield. Marine strata of Paleozoic, Mesozoic, and Cenozoic ages abound in northern Libya, but continental rocks of Paleozoic and Mesozoic ages predominate in southern Libya. Marine incursions in Ordovician, Silurian, Devonian, Carboniferous, late Cretaceous, and early Tertiary times reached far into the country, some crossing the southern border. Compressional folds are almost wholly absent, but uplift, subsidence, block faulting, and tilting have occurred, and angular and parallel unconformities are common. The major diastrophic disturbances include the Caledonian and Hercynian, as well as disturbances during late Cretaceous and Oligocene through Miocene or Recent times. The chief regional structures are the Gefara basin, Hamada basin, Gargaf arch, Marzuq basin, Tibesti-Haruj uplift, Kufra basin, Cyrenaican uplift, and Sirte embayment. Several large basalt flows of Cenozoic age are present. Sand and gravel conceal the bedrock in about a third of the country. In the Sirte embayment marine sedimentation, differential compaction, reef development, subsidence, and block faulting, beginning in late Cretaceous time, favored the development of source and reservoir rocks. Recoverable oil has been found chiefly in limestone and sandstone of early and late Cretaceous and Tertiary ages, and in knobs of probable early Paleozoic sandstone and in fractured granite. In the Hamada basin oil accumulations have been found in sandstones of Triassic age and of several Paleozoic systems. Most of the oil and gas discovered to date in Libya are in anticlinal structures, but several unconformities within the section probably influenced these accumulations; oil and gas may well await discovery in other types of traps.

AAPG Bulletin↗
USGS1992

Geology of the Eel River basin and adjacent region: Implications for late Cenozoic tectonics of the southern Cascadia subduction zone and Mendocino triple junction

Two upper Cenozoic depositional sequences of principally marine strata about 4000m thick overlie accreted basement terranes of the Central and Coastal belts of the Franciscan Complex in the onshore-offshore Eel River basin of northwestern California. The older depositional sequence is early to middle Miocene in age and represents slope basin and slope-blanket deposition, whereas the younger sequence, late Miocene to middle Pleistocene in age, consists largely of forearc basin deposits. -from Author

California↗
USGS2015

Paleoseismic evidence for late Holocene tectonic deformation along the Saddle mountain fault zone, Southeastern Olympic Peninsula, Washington

Trench and wetland coring studies show that northeast‐striking strands of the Saddle Mountain fault zone ruptured the ground about 1000 years ago, generating prominent scarps. Three conspicuous subparallel fault scarps can be traced for 15 km on Light Detection and Ranging (LiDAR) imagery, traversing the foothills of the southeast Olympic Mountains: the Saddle Mountain east fault, the Saddle Mountain west fault, and the newly identified Sund Creek fault. Uplift of the Saddle Mountain east fault scarp impounded stream flow, forming Price Lake and submerging an existing forest, thereby leaving drowned stumps still rooted in place. Stratigraphy mapped in two trenches, one across the Saddle Mountain east fault and the other across the Sund Creek fault, records one and two earthquakes, respectively, as faulting juxtaposed Miocene‐age bedrock against glacial and postglacial deposits. Although the stratigraphy demonstrates that reverse motion generated the scarps, slip indicators measured on fault surfaces suggest a component of left‐lateral slip. From trench exposures, we estimate the postglacial slip rate to be 0.2 mm/yr and between 0.7 and 3.2 mm/yr during the past 3000 years. Integrating radiocarbon data from this study with earlier Saddle Mountain fault studies into an OxCal Bayesian statistical chronology model constrains the most recent paleoearthquake age of rupture across all three Saddle Mountain faults to 1170–970 calibrated years (cal B.P.), which overlaps with the nearby M w 7.5 1050–1020 cal B.P. Seattle fault earthquake. An earlier earthquake recorded in the Sund Creek trench exposure, dates to around 3500 cal B.P. The geometry of the Saddle Mountain faults and their near‐synchronous rupture to nearby faults 1000 years ago suggest that the Saddle Mountain fault zone forms a western boundary fault along which the fore‐arc blocks migrate northward in response to margin‐parallel shortening across the Puget Lowland.

Bulletin of the Seismological Society of America↗
USGS2018

Sources of long-range anthropogenic noise in southern California and implications for tectonic tremor detection

We study anthropogenic noise sources seen on seismic recordings along the central section of the San Jacinto fault near Anza, southern California. The strongest signals are caused by freight trains passing through the Coachella Valley north of Anza. Train‐induced transients are observed at distances of up to 50 km from the railway, with durations of up to 20 min, and spectra that are peaked between 3 and 5 Hz. Additionally, truck traffic through the Coachella Valley generates a sustained hum with a similar spectral signature as the train transients but with lower amplitude. We also find that wind turbine activity in northern Baja California introduces a seasonal modulation of 1– to 5‐Hz energy across the Anza network. We show that the observed train‐generated transients can be used to constrain shallow attenuation structure at Anza. Using the results from this study as well as available borehole data, we further evaluate the performance of approaches that have been used to detect nonvolcanic tremor at Anza. We conclude that signals previously identified as spontaneous tremor ( Hutchison and Ghosh, 2017 ) were probably generated by other nontectonic sources such as trains.

California↗
USGS2021

Seismotectonic analysis of the 2019–2020 Puerto Rico sequence: The value of absolute earthquake relocations in improved interpretations of active tectonics

We present a new catalog of calibrated earthquake relocations from the 2019–2020 Puerto Rico earthquake sequence related to the 7 January 2020 M w 6.4 earthquake that occurred offshore of southwest Puerto Rico at a depth of 15.9 km. Utilizing these relocated earthquakes and associated moment tensor solutions, we can delineate several distinct fault systems that were activated during the sequence and show that the M w 6.4 mainshock may have resulted from positive changes in Coulomb stress from earlier events. Seismicity and mechanisms define (1) a west–southwest (∼260°) zone of seismicity comprised of largely sinistral strike‐slip and oblique‐slip earthquakes that mostly occurs later in the sequence and to the west of the mainshock, (2) an area of extensional faulting that includes the mainshock and occurs largely within the mainshock’s rupture area, and (3) an north–northeast (∼30°)‐striking zone of seismicity, consisting primarily of dextral strike‐slip events that occurs before and following the mainshock and generally above (shallower than) the normal‐faulting events. These linear features intersect within the M w 6.4 mainshock’s fault plane in southwest Puerto Rico. In addition, we show that earthquake relocations for M 4+ normal‐faulting events, when traced along their fault planes, daylight along east–west‐trending bathymetric features offshore of southwest Puerto Rico. Correlation of these normal‐faulting events with bathymetric features suggests an active fault system that may be a contributor to previously uncharacterized seismic hazards in southwest Puerto Rico.

Puerto Rico↗
USGS2026

Fault sources of the 2020 southern Puerto Rico seismic sequence and the regional tectonic structure

The 2020 southwestern Puerto Rico seismic sequence occurred in an area not known for seismic activity and included multiple normal and strike‐slip focal mechanisms. The largest earthquake, M w 6.4, caused significant damage and permanent shoreline subsidence. The locations of the ruptured faults have been explored extensively using seismological and geodetic evidence, but no consensus has been reached. Here, we report the results of a high‐resolution seismic reflection survey that identified a north‐verging 20 km long curved normal fault spanning the upper reach of the Guayanilla canyon, which we call the Guayanilla Canyon fault. Part of the fault likely ruptured during the M w 6.4. The concave‐to‐the‐north fault bounds a south‐dipping ∼1 km deep asymmetric basin. This long‐lived structure, identified also on sediment isopach and magnetic anomaly maps, appears to control the formation of the Guayanilla canyon system, the only submarine drainage system in southern Puerto Rico, suggesting a relationship among seismic activity, geomorphology, and reef development. Our seismic reflection data do not support the existence of previously published major seismogenic faults in the area, such as the north‐northeast–south‐southwest Guayanilla fault zone, the Northern Boqueron Bay‐Punta Montalva fault, or a northwest–southeast strike‐slip fault, suggested to have ruptured as part of the M w 6.4 earthquake. We identified smaller faults in the survey area, some of which can be correlated with seafloor expressions, and/or with changes in sediment thickness and magnetic anomalies, and/or with moderate‐sized earthquakes. Multiple seismic images of Investigator fault, a prominent mid‐slope feature parallel to the south coast of Puerto Rico, show buried low‐angle thrusts and an abrupt change in the attitude of the overlying sediments, leading us to interpret this feature as the expression of a boundary between the now‐inactive upper accretionary prism of Muertos trough and a buried back‐arc basin that overlies the arc basement of Puerto Rico.

Puerto Rico↗
USGS1985

Quaternary tectonic setting of the 1983 Borah Peak earthquake, central Idaho

The 1983 Borah Peak earthquake was accompanied by extensive surface faulting along a part of the Lost River fault that has abundant evidence of latest Quaternary (last 15,000 yr) offset. This fault and two similar range-front normal faults along the Lemhi Range and Beaverhead Mountains lie in an area of basin-and-range structure in central Idaho that is part of a roughly V-shaped belt of latest Quaternary surface faulting that extends from the Wasatch fault, through the Yellowstone area, to the Lost River fault. The position of this belt may be related to the outward migration of a thermal front associated with the northeastward progression of late Cenozoic silicic volcanism along the Yellowstone-Snake River Plain axis. The central segments of the Lost River, Lemhi, and Beaverhead faults have been active more recently, and probably more active throughout Quaternary time, than the southern and northern segments. The main 1983 surface faulting occurred in an area of high structural relief along a central segment of the Lost River fault that has ruptured in latest Quaternary time, which suggests that comparable areas along other range fronts in the area should be regarded as likely sites of future surface faulting. Other perspective of fault behavior suggest additional possible sites, and all segments of the range-front faults are regarded as capable of surface faulting.

Idaho↗