USGS Science⌕ Search

SEARCH · USGS Science

Results for “Natural Resources Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

837 records · Page 38Linked to original sources
USGS1989

An investigation of shallow ground-water quality near East Fork Poplar Creek, Oak Ridge, Tennessee

Alluvial soils and fill materials in and near the floodplain of East Fork Poplar Creek in Oak Ridge, Tennessee, are contaminated with various trace metals (primarily mercury), organic compounds, and radionuclides that were lost to the stream as a result of past operations at the Y-12 Plant, a nuclear-processing facility located within the U.S. Department of Energy’s Oak Ridge Reservation. Observation wells were installed in the shallow (above bedrock) aquifer in and near the floodplain of East Fork Poplar Creek and water-quality samples were collected to determine if contaminants found in the soils and fill are also present in the shallow ground water. The shallow aquifer in the East Fork Poplar Creek flood plain consists primarily of alluvial silt and clay with lesser amounts of sand and gravel. Thickness of the shallow aquifer ranges from essentially zero to as much as 20 feet. A silty-clay glei horizon is present between the base of the alluvium and the top of bedrock at most flood-plain locations and, where present, likely impedes downward ground-water movement. Water in the shallow aquifer near East Fork Poplar Creek occurs under water-table conditions. Recharge to the shallow aquifer is principally from precipitation, and discharge is through springs and seeps to East Fork Poplar Creek and its tributaries. During spring, summer; and fall, evapotranspiration also accounts for the removal of water in storage in the shallow aquifer. Water levels in the shallow aquifer fluctuate seasonally in response to variations in recharge and evapotranspiration. Generally, the depth to water in the observation wells ranged from about 1 to 4 feet below land surface in late winter, and from about 2 to 7 feet below land surface in late fall. During extremely dry periods, the water table recedes below the top of bedrock in some flood-plain areas, possibly causing East Fork Poplar Creek to lose water to the shallow aquifer along some reaches. Contaminants found in water samples collected from several of the observation wells in concentrations (total and (or) total-recoverable) which equaled or exceeded drinking-water standards established by the U.S. Environmental Protection Agency are antimony, chromium, lead, mercury, selenium, total phenols, and strontium-90. Total and dissolved uranium concentrations exceeded 1.0 microgram per liter in samples from nearly 70 percent of the wells in the East Fork Poplar Creek flood plain. Organic compounds that were identified in low concentrations in samples from a few wells in the flood plain are: Arochlor 1260, benzo(a)anthracene, benzo(b)fluoranthene, chrysene, 3,3-dichlorobenzidine, di-n-butylphthalate, N-nitrosodiphenylamine, and pyrene. Water from one well in the East Fork Poplar Creek flood plain at a contaminated fill site contained 37and 8 micrograms per liter of trichloroethene and trans-1,2-dichloroethene, respectively. Comparison of the results of total and (or) total-recoverable trace-metal determinations with those from dissolved determinations demonstrates that elevated concentrations of these substances in water collected from several of the wells in the East Fork Poplar Creek flood plain resulted from sorption of trace metals (and possibly organic compounds and radionuclides) by fine sediment suspended in the samples. The occurrence of contaminated sediment in these samples is suspected to be the result of borehole contamination during well installation.

Tennessee↗
USGS2025

Map of topographic lineaments interpreted as recent surface ruptures along the Bennett Valley and Southern Maacama Fault Zones, Sonoma County, California

This study documents lidar-illuminated topographic lineaments interpreted as evidence of recent surface fault ruptures and surface ruptures related to distributed deformation along the Bennett Valley Fault Zone and the southernmost Maacama Fault Zone in the northern San Francisco Bay area (fig. 1, on map sheet). Together, these fault zones form a structural connection across a right stepover between the main Maacama Fault Zone and the Rodgers Creek Fault, overlapping principal strands of the San Andreas plate boundary system north of San Francisco Bay (figs. 1, 2, on map sheet) that accommodate about a quarter of the ~40 millimeters per year of regional dextral tectonic slip (Parsons and others, 2013). Although much of the Bennett Valley Fault Zone is seismically active (McLaughlin and others, 2012; Sowers and others, 2010), only the north end of the fault zone (the “Spring Valley strand,” indicated on southern map panel of map sheet and labeled “D” in figure 2, on map sheet) was previously known to have youthful geomorphic expression and to displace Holocene deposits (McLaughlin and others, 2008; Sowers and others, 2010; Sowers and others, 2016). Holocene activity along the length of the Bennett Valley Fault Zone and southernmost Maacama Fault Zone, with possible implications for rupture propagation, continuity, and slip transfer, had not been identified. However, fault splays that project eastward from the Rodgers Creek Fault have been mapped and hypothesized to accommodate slip transfer to the Bennett Valley Fault Zone (Hecker and Randolph Loar, 2018). The generally subtle and distributed nature of surface-rupture evidence along the Bennett Valley and southernmost Maacama Fault Zones, and extensive vegetation cover, had left recent faulting previously unmapped along most of the zone. The map presented here represents a new compilation of inferred surface-rupture features detected using high-resolution topographic lidar data from an airborne lidar survey of Sonoma County, California (OpenTopography, 2014). These data, which enable subtle topographic features to be discerned, indicate that recent (likely Holocene) surface ruptures extend throughout the Bennett Valley and southernmost Maacama Fault Zones. The rupture-lineament map was created using a GIS (geographic information system) framework and is included herein as an image map at a scale of 1:36,000 and as digital datasets (included as supplemental information to this report). The mapping is intended to lay the groundwork for future studies designed to better characterize how plate-boundary slip is accommodated on this important and complex system of faults.

California↗
USGS2025

System characterization report on the Environmental Mapping and Analysis Program (EnMAP)

This report addresses system characterization of the Environmental Mapping and Analysis Program hyperspectral sensor by the DLR (German Aerospace Center, ground segment project management), GFZ (Deutsches Geoforschungszentrum, science lead) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the EnMAP hyperspectral sensor; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), and radiometric performances of the EnMAP hyperspectral sensor. Results of these analyses indicate that the Environmental Mapping and Analysis Program has a band-to-band geometric performance in the range of −0.135 to 0.15 pixel, geometric performance relative to the Operational Land Imager in the range of −27.716 meters (−0.92 pixel) to 32.892 meters (1.09 pixels) offset in comparison to Landsat 8 Operational Land Imager, offset of a radiometric comparison in the range of −0.012 to 0.020, slope of a radiometric comparison in the range of 0.947 to 1.031.

Open-File Report↗
USGS2026

Geochemical geodatabase of sedimentary strata (coal, coal-adjacent rocks, tuffaceous oil shale, phosphate-rich rocks) and produced water in the Uinta region, Utah and Colorado

The Geochemical Geodatabase of Sedimentary Strata (Coal, Coal-adjacent Rocks, Tuffaceous Oil Shale, Phosphate-rich Rocks) and Produced Water in the Uinta Region, Utah and Colorado, consists of compiled datasets acquired as part of the Carbon Ore, Rare Earth, and Critical Mineral (CORE-CM) Uinta Region assessment funded by the U.S. Department of Energy (DEFE0032046, 2021–2024; Birgenheier et al., 2024). The CORE-CM assessment focused on providing comprehensive geological and geochemical characterization of current and prospective sedimentary-hosted resources including coal, oil shale, phosphatic limestone, and produced water from oil and gas targets present in eastern Utah and northwestern Colorado (Figure 1). This Data Series includes a geodatabase that consists of analytical geochemical data collected September 2021 through December 2024 via portable X-ray fluorescence (pXRF), and laboratory measured analyses produced by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The coal-related geochemical data are derived primarily from the Cretaceous Blackhawk Formation and Ferron Sandstone of Utah, and the Mesaverde Group of Colorado. Additional non-coal resources assessed include oil shale-bearing strata of the Eocene upper Green River Formation (Utah and Colorado), phosphate-rich limestone of the Permian Park City Formation (Utah) and produced water from oil and gas-bearing strata of the Eocene Green River and Wasatch Formations (Uinta Basin) and the Pennsylvanian Paradox Formation (Paradox Basin) (Table 1). The CORE-CM assessment included a wide range of lithologies present in the coal, oil shale, and phosphate geologic resource systems whether or not the specific lithology has current economic value. Geochemical analyses of produced water from oil and gas wells focused on current and emerging hydrocarbon targets in the central Uinta Basin and northern Paradox Basin. A total of 13,092 geochemical analyses from these geologic systems is provided in the included geodatabase. A series of coal quality data (e.g., composition and maceral analyses) is also included in the database and was digitized from archived coal samples from the Utah Geological Survey (Appendix A).

Colorado, Utah↗
USGS1999

Concentrations and distribution of manmade organic compounds in the Lake Tahoe Basin, Nevada and California, 1997-99

The U.S. Geological Survey, in cooperation with the Tahoe Regional Planning Agency and the Lahontan Regional Water-Quality Control Board, sampled Lake Tahoe, major tributary streams to Lake Tahoe, and several other lakes in the Lake Tahoe Basin for manmade organic compounds during 1997-99. Gasoline components were found in all samples collected from Lake Tahoe during the summer boating season. Methyl tert -butyl ether (MTBE), benzene, toluene, ethylbenzene, and xylenes (BTEX) were the commonly detected compounds in these samples. Most samples from tributary streams and lakes with no motorized boating had no detectable concentrations of gasoline components. Motorized boating activity appears to be directly linked in space and time to the occurrence of these gasoline components. Other sources of gasoline components to Lake Tahoe, such as the atmosphere, surface runoff, and subsurface flow, are minor compared to the input by motorized boating. Water sampled from Lake Tahoe during mid-winter, when motorized boating activity is low, had no MTBE and only one sample had any detectable BTEX compounds. Soluble pesticides rarely were detected in water samples from the Lake Tahoe Basin. The only detectable concentrations of these compounds were in samples from Blackwood and Taylor Creeks collected during spring runoff. Concentrations found in these samples were low, in the 1 to 4 nanograms per liter range. Organochlorine compounds were detected in samples collected from semipermeable membrane devices (SPMD's) collected from Lake Tahoe, tributary streams, and Upper Angora Lake. In Lake Tahoe, SPMD samples collected offshore from urbanized areas contained the largest number and highest concentrations of organochlorine compounds. The most commonly detected organochlorine compounds were cis- and trans-chlordane, p , p' -DDE, and hexachlorobenzene. In tributary streams, SPMD samples collected during spring runoff generally had higher combined concentrations of organochlorine compounds than those collected during baseflow conditions. Upper Angora Lake had the fewest number of organochlorine compounds detected of all lake samples. Dioxins and furans were not detected in SPMD samples from two sites in Lake Tahoe or from two tributary streams. The number of polycyclic aromatic hydrocarbon (PAH) compounds and their combined concentrations generally were higher in samples from Lake Tahoe than those from tributary streams. Areas of high-motorized boating activity at Lake Tahoe had the largest number and highest concentrations of PAH's. PAH compounds were detected in samples from SPMD's in four of six tributary streams during spring runoff, all tributary streams during baseflow conditions, and at all lake sites. The most commonly detected PAH's in tributary streams during spring runoff were phenanthrene, fluoranthene, pyrene, and chrysene, and during baseflow conditions were phenanthrene, 1-methylphenanthrene, diethylnaphthalene, and pyrene. Upper Truckee River, which has an urban area in its drainage basin, had the largest number and highest combined concentration of PAH's of all stream samples. Bottom-sediment from Lake Tahoe had detectable concentrations of p-cresol, a phenol, in all but one sample. A sample collected near Chambers Lodge contained phenol at an estimated concentration of 4 micrograms per kilogram (µg/kg). Bottom-sediment samples from tributary streams had no detectable concentrations of organochlorine or PAH compounds. Several compounds were detected in bottom sediment from Upper Angora Lake at high concentrations. These compounds and their concentrations were p , p' -DDD (10 µg/kg), p , p' -DDE (7.4 µg/kg), 2,6-dimethylnaphthalene (estimated at 190 µg/kg), pentachlorophenol (3,000 µg/kg), and p-cresol (4,400 µg/kg).

California, Nevada↗
USGS1999

Streamflow, base flow, and ground-water recharge in the Housatonic River basin, western Massachusetts and parts of eastern New York and northwestern Connecticut

Streamflows for selected flow durations from 1 to 99 percent and the August median streamflows were estimated for 11 long-term streamflow-gaging stations in and near the study area. Estimates of streamflow and associated standard errors were determined for selected flow durations from 50 to 99 percent and the August median streamflows for 21 low-flow partial-record stations and for selected flow durations from 1 to 99 percent and the August median streamflows for two partial-record stations and seven short-term discontinued streamflow-gaging stations. Median streamflows per square mile for the 10-, 50-, and 90-percent flow durations and the August median streamflows were 3.90, 1.01, 0.185, and 0.248 cubic feet per second per square mile. Streamflows per square mile at selected flow-duration discharges between 1 and 99 percent at the 41 stations were related to basin characteristics to explain differences in streamflow characteristics. Basin characteristics included basin elevations, extent of stratified-drift deposits, land use, aspect, and underlying bedrock geology types. Most streamflow differences were positively correlated to basin elevation differences, most likely because precipitation increases with elevation, and to stratified-drift deposits, which allow more precipitation to recharge the ground water and to discharge later than do till and bedrock deposits. Mean base flow was computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual base flow ranged from 13.4 to 24.5 inches per year. Minimum annual base flow ranged from 45 to 72 percent of mean annual rates at the 11 long-term stations, and the ratio of base flow to streamflow (base-flow index) ranged from 0.55 to 0.80. Base-flow durations between 1 and 99 percent were calculated from streamflow records at the 11 long-term streamflow-gaging stations. Base flow accounted for 45.5 to 85.0 percent of total annual streamflow at the 1- and 99-percent flow durations. Ground-water-recharge rates were computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual ground-water-recharge rates ranged from 17.5 to 22.4 inches per year at 10 of the 11 long-term stations. Mean annual ground-water-recharge rates ranged from 2 to 7 inches per year higher than base flow. Minimum annual ground-water-recharge rates ranged from 48 to 72 percent of mean annual ground-water-recharge rates. Mean annual potential ground-water recharge was estimated from monthly climatological data collected at six climatological stations in and near the study area. Mean potential ground-water recharge ranged from about 17.9 to 28.9 inches per year, with a median value of 22.6 inches per year. This median value compares well to that calculated by use of streamflow records at the 11 streamflow-gaging stations (20.0 inches per year). Streamflows per square mile for the 10-, 50-, and 90-percent flow durations at stations in and near the study area were similar to those computed for other unregulated long-term continuous streamflow-gaging stations in central and eastern Massachusetts. Base-flow and ground-water-recharge rates in the study area compared closely to results from other studies in southeastern Massachusetts and Rhode Island, which were based on the same computational methods.

Connecticut, Massachusetts, New York↗
USGS2024

System characterization report on the Earth Surface Mineral Dust Source Investigation (EMIT) sensor

Executive Summary This report addresses system characterization of the Earth Surface Mineral Dust Source Investigation (EMIT) sensor, an imaging spectrometer developed by the National Aeronautics and Space Administration. This report is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and radiometric performances. Results of these analyses indicate that the EMIT sensor has a band-to-band geometric performance in the range of −0.355 to 0.210 pixel with a few exceptions of shortwave infrared channels. Geometric offset relative to the Landsat 8 Operational Land Imager ranged from −15.966 meters (−0.266 pixel) to 43.844 meters (0.731 pixel). Offset of a radiometric comparison ranged from −0.016 to 0.025, and slope of a radiometric comparison ranged from 0.837 to 0.985. EMIT agreed with Radiometric Calibration Network measurements within 5 percent across most of the spectral channels.

Open-File Report↗
USGS2024

Cold blood in warming waters: Effects of air temperature, precipitation, and groundwater on Gulf Sturgeon thermal habitats in a changing climate

Objective In a changing climate, the effects of air temperature, precipitation, and groundwater on water temperature and thermal habitat suitability for Gulf Sturgeon Acipenser desotoi , listed as threatened under the U.S. Endangered Species Act, are not well understood. Hence, we incorporated these factors into thermal habitat models to forecast how Gulf Sturgeon may be affected by wide‐ranging climate change scenarios in 2024–2074. Methods Using data from the Choctawhatchee River, Florida, we developed precipitation‐ and groundwater‐corrected air–water temperature models, compared their accuracy with that of conventional air–water temperature models used in fisheries management, and projected future Gulf Sturgeon thermal habitat suitability for normal physiological functioning and fieldwork (i.e., population sampling and telemetry surgeries) in summer (May–August) under 16 climate change scenarios. Result Precipitation‐ and groundwater‐corrected models were more accurate than conventional air–water temperature models (mean improvement in adjusted R 2 = +0.45; range = +0.09 to +0.75). Water temperature was projected to warm at widely variable rates across climate change scenarios encompassing different air temperature, precipitation, and groundwater regimes. Importantly, Gulf Sturgeon summer aggregation areas were cooler and influenced more by precipitation and groundwater and less by air temperature than were non‐aggregation areas. If precipitation and groundwater—as drivers of cooling—become warm in a changing climate, summer aggregation areas were projected to exhibit thermal habitat degradation equivalent to or greater than that of non‐aggregation areas. Conclusion Our results add hydrological context to the premise that aggregation areas provide cool water and energetic savings for Gulf Sturgeon during summer, underscoring the importance of protecting these habitats through groundwater conservation, water quality monitoring, and riparian/watershed habitat management. Our findings indicate that identifying thermally appropriate times for fieldwork activities will be increasingly important and time‐restricted as climate change intensifies. However, our research provides managers with a portfolio of water temperature models and an accurate, cost‐effective, management‐relevant approach to forecasting thermal habitat conditions for Gulf Sturgeon and other species in a changing climate.

Alabama, Florida↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS1994

Hydrogeology of the Chickasaw National Recreation Area, Murray County, Oklahoma

The Travertine District (Park) of the Chickasaw National Recreation Area, operated and maintained by the National Park Service, is near the City of Sulphur in south-central Oklahoma. The Park was established in 1902 because of its unique hydrologic setting, which includes Rock Creek, Travertine Creek, numerous mineralized and freshwater springs, and a dense cover of riparian vegetation. Since the turn of the century several flowing artesian wells have been drilled within and adjacent to the Park. Discharge from many of these springs and the numbers of flowing wells have declined substantially during the past 86 years. To determine the cause of these declines, a better understanding of the hydrologic system must be obtained. The U.S. Geological Survey, in cooperation with the National Park Service, has appraised hydrologic information obtained for the Park from several studies conducted during 1902-87. The principal geologic units referred to in this report are the Arbuckle Group and the overlying Simpson Group. These rocks are of Upper Cambrian to Middle Ordovician age and are composed of dolomitic limestone, with some sandstones and shales in the Simpson Group. Surface geologic maps give a general understanding of the regional subsurface geology, but information about the subsurface geology within the Park is poor. The Simpson and Arbuckle aquifers are the principal aquifers in the study area. The two aquifers are not differentiated readily in some parts of the study area because of the similarity of the Simpson and Arbuckle rocks; thus, both water-bearing units are referred to frequently as the Arbuckle-Simpson aquifer. The aquifers are confined under the Park, but are unconfined east and south of the Park. Precipitation on the outcrop area of the Arbuckle aquifer northeast and east of the Park recharges the freshwater springs (Antelope and Buffalo Springs) near the east boundary of the Park. The source of water from mineralized springs located in the central part of the Park, and flowing wells within and north of the Park, is believed to be a mix of waters from rocks of the Arbuckle and Simpson Groups. The source of water from two highly mineralized springs, Bromide and Medicine, that ceased to flow in the early 1970’s is believed to be from the Simpson Group. Water-quality characteristics reflect the sources of ground water in the study area. The highly mineralized springs near the western end of the Park are a sodium chloride type with dissolved solids greater than 4,500 mg/L. The freshwater springs near the eastern end of the Park are a calcium bicarbonate type with total dissolved solids of less than 400 mg/L. Flow from the artesian wells has declined substantially during the past 86 years and the wells are estimated to currently discharge only about 10 percent of the total flow reported in 1939. The depletion is believed to be caused by a gradual lowering of the hydraulic head within the aquifer. The influence on the hydrologic system of local municipal and industrial pumping from the Arbuckle-Simpson aquifer is difficult to discern because the system is much more sensitive to precipitation than to pumpage. Ground-water levels and spring flows in this region respond rapidly to precipitation. The effects of withdrawals from the City of Sulphur and Oklahoma Gas and Electric Company power-plant water-well fields are not discernible at wells and springs. The hydrologic system may be influenced by pumping, particularly during extended dry periods of several years, but the impact of pumping on the system cannot be determined without further investigation.

Oklahoma↗
USGS1999

Episodic sediment-discharge events in Cascade Springs, southern Black Hills, South Dakota

Cascade Springs is a group of artesian springs in the southern Black Hills, South Dakota, with collective flow of about 19.6 cubic feet per second. Beginning on February 28, 1992, a large discharge of red suspended sediment was observed from two of the six known discharge points. Similar events during 1906-07 and 1969 were documented by local residents and newspaper accounts. Mineralogic and grain-size analyses were performed to identify probable subsurface sources of the sediment. Geochemical modeling was performed to evaluate the geochemical evolution of water discharged from Cascade Springs. Interpretations of results provide a perspective on the role of artesian springs in the regional geohydrologic framework. X-ray diffraction mineralogic analyses of the clay fraction of the suspended sediment were compared to analyses of clay-fraction samples taken from nine geologic units at and stratigraphically below the spring-discharge points. Ongoing development of a subsurface breccia pipe(s) in the upper Minnelusa Formation and/or Opeche Shale was identified as a likely source of the suspended sediment; thus, exposed breccia pipes in lower Hell Canyon were examined. Upper Minnelusa Formation breccia pipes in lower Hell Canyon occur in clusters similar to the discrete discharge points of Cascade Springs. Grain-size analyses showed that breccia masses lack clay fractions and have coarser distributions than the wall rocks, which indicates that the red, fine-grained fractions have been carried out as suspended sediment. These findings support the hypothesis that many breccia pipes were formed as throats of abandoned artesian springs. Geochemical modeling was used to test whether geochemical evolution of ground water is consistent with this hypothesis. The evolution of water at Cascade Springs could not be suitably simulated using only upgradient water from the Minnelusa aquifer. A suitable model involved dissolution of anhydrite accompanied by dedolomitization in the upper Minnelusa Formation, which is caused by upward leakage of relatively fresh water from the Madison aquifer. The anhydrite dissolution and dedolomitization account for the net removal of minerals that would lead to breccia pipe formation by gravitational collapse. Breccia pipes in the lower Minnelusa Formation are uncommon; however, networks of interconnected breccia layers and breccia dikes are common. These networks, along with vertical fractures and faults, are likely pathways for transmitting upward leakage from the Madison aquifer. It is concluded that suspended sediment discharged at Cascade Springs probably results from episodic collapse brecciation that is caused by subsurface dissolution of anhydrite beds and cements of the upper Minnelusa Formation, accompanied by replacement of dolomite by calcite. It is further concluded that many breccia pipes probably are the throats of artesian springs that have been abandoned and exposed by erosion. The locations of artesian spring-discharge points probably have been shifting outwards from the center of the Black Hills uplift, essentially keeping pace with regional erosion over geologic time. Thus, artesian springflow probably is a factor in controlling water levels in the Madison and Minnelusa aquifers, with hydraulic head declining over geologic time, in response to development of new discharge points. Development of breccia pipes as throats of artesian springs would greatly enhance vertical hydraulic conductivity in the immediate vicinity of spring-discharge points. Horizontal hydraulic conductivity in the Minnelusa Formation also may be enhanced by dissolution processes related to upward leakage from the Madison aquifer. Potential processes could include dissolution resulting from leakage in the vicinity of breccia pipes that are abandoned spring throats, active spring discharge, development of subsurface breccias with no visible surface expression or spring discharge, as well as general areal leakage from the Madison aquifer into the Minnelusa Formation.

South Dakota↗
USGS2026

A cross-site comparison of ecosystem- and plot-scale methane fluxes across multiple sites

Wetland and upland ecosystems play significant but opposing roles in the global methane (CH 4 ) budget, acting as natural sources and sinks, respectively. Two of the most common approaches for measuring CH 4 fluxes (FCH 4 ) are chambers, which measure fluxes at fine spatial scales (ca. 1 m 2 ), and eddy covariance (EC) towers, which integrate fluxes across larger footprints (ca. 100–10 000 m 2 ). Although chamber and EC observations have been combined in various syntheses and databases to estimate CH 4 budgets, a unified cross-site evaluation of FCH 4 estimates at plot and ecosystem scales is lacking. As a first step toward a systematic spatiotemporal scaling of EC tower and chamber footprints, we quantified differences in site-level aggregate FCH 4 between EC and chamber measurements ( Δ FCH 4 ) across ten wetland and upland sites at half-hourly, hourly, daily, weekly, monthly, and annual timescales. We found that ecosystem-scale median FCH 4 was consistently higher than plot-scale FCH 4 at all temporal scales, with the smallest difference at the daily timescale (multi-site median Δ FCH 4 : 1.36 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 1.56 nmol m −2 s −1 , median plot-scale FCH 4 = 0.06 nmol m −2 s −1 ) and the largest at annual scales (2.58 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 25.91 nmol m −2 s −1 , median plot-scale FCH 4 = 6.55 nmol m −2 s −1 ). In general, the agreement between ecosystem- and plot-scale FCH 4 decreased with finer temporal resolution (from Spearman ρ = 0.95 at the annual scale to ρ = 0.65 at the half-hourly scale), while Δ FCH 4 variation was greatest at daily-to-annual scales. Key environmental predictors of Δ FCH 4 across the ten sites included plot-scale spatial heterogeneity, dominant vegetation type, vapor pressure deficit, atmospheric pressure, and friction velocity at the daily and monthly scales. Wind direction was a significant predictor only at the monthly scale, suggesting EC footprint effects at these sites. These findings suggest that accounting for variability in EC footprint extent, chamber measurement placement, and measurement artifacts is key to reconciling multi-scale FCH 4 observations across diverse ecosystems and refining CH 4 budgets.

Biogeosciences↗
USGS2021

Geology, mineralogy, and cassiterite geochronology of the Ayawilca Zn-Pb-Ag-In-Sn-Cu deposit, Pasco, Peru

The Ayawilca deposit in Pasco, Peru, represents the most significant recent base-metal discovery in the central Andes and one of the largest undeveloped In resources globally. As of 2018, it hosts an 11.7 Mt indicated resource grading 6.9% Zn, 0.16% Pb, 15 g/t Ag, and 84 g/t In, an additional 45.0 Mt inferred resource grading 5.6% Zn, 0.23% Pb, 17 g/t Ag, and 67 g/t In, and a separate Sn-Cu-Ag inferred resource of 14.5 Mt grading 0.63% Sn, 0.21% Cu, and 18 g/t Ag. Newly obtained U–Pb dates for cassiterite by LA-ICP-MS (22.77 ± 0.41 and 23.05 ± 2.06 Ma) assign the Ayawilca deposit to the Miocene polymetallic belt of central Peru. The polymetallic mineralization occurs as up to 70-m-thick mantos hosted by carbonate rocks of the Late Triassic to Early Jurassic Pucará Group, and subordinately, as steeply dipping veins hosted by rocks of the Pucará Group and overlying Cretaceous sandstones-siltstones of the Goyllarisquizga Group. Relicts of a distal retrograde magnesian skarn and cassiterite (stage pre-A) were identified in the deepest mantos. The volumetrically most important mineralization at Ayawilca comprises a low-sulfidation assemblage (stage A) with quartz, pyrrhotite, arsenopyrite, chalcopyrite, Fe-rich sphalerite, and traces of stannite and herzenbergite. Stage A sphalerite records progressive Fe depletion, from 33 to 10 mol% FeS, which is compatible with the observed transition from low- to a subsequent intermediate-sulfidation stage (B) marked by the crystallization of abundant pyrite and marcasite. Finally, during a later intermediate-sulfidation stage (C) sphalerite (up to 11 mol% FeS), galena, native bismuth, Cu-Pb-Ag sulfosalts, siderite, Mn-Fe carbonates, kaolinite, dickite, and sericite were deposited. This paragenetic evolution shows striking similarities with that at the Cerro de Pasco Cordilleran-type polymetallic deposit, even if at Ayawilca stage C did not reach high-sulfidation conditions. The occurrence of an early retrograde skarn assemblage suggests that the manto bodies at Ayawilca formed at the transition between distal skarn and skarn-free (Cordilleran-type) carbonate-replacement mineralization. Mineral assemblages define a T- f S 2 evolutionary path close to the pyrrhotite-pyrite boundary. Buffering of hydrothermal fluids by underlying Devonian carbonaceous phyllites of the Excelsior Group imposed highly reduced conditions during stage A mineralization (log f O 2 < − 30 atm). The low f O 2 favored efficient Sn mobility during stages pre-A and A, in contrast to other known ore deposits in the polymetallic belt of central Peru, in which the occurrence of Sn minerals is minor. Subsequent cooling, progressive sealing of vein walls, and decreasing buffering potential of the host rocks promoted the shift from low- (stage A) to intermediate-sulfidation (stages B and C) states. LA-ICP-MS analyses reveal significant In contents in Fe-rich sphalerite (up to 1.7 wt%), stannite (up to 1908 ppm), and chalcopyrite (up to 1185 ppm). The highest In content was found in stage A sphalerite that precipitated along with chalcopyrite and stannite, thus pointing to the early, low-sulfidation assemblage as prospective for this high-tech metal in similar mineral systems. Indium was likely incorporated into the sphalerite crystal lattice via Cu + + In 3+ ↔ 2 Zn 2+ and (Sn, Ge) 4+ + (Ga, In) 3+ + (Cu + Ag) + ↔ 4 Zn 2+ coupled substitutions. Indium incorporation mechanisms into the stannite and chalcopyrite crystal lattices remain unclear.

Pasco↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS2025

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes significantly to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides significant volumes of agricultural products not just for California but the entire United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface water and groundwater resources in the valley. This has resulted in water management challenges in the Salinas Valley that are predominantly related to distribution of water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. To deal with the distribution issue, historically water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface water supplies are insufficient. Availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand on groundwater and surface water resources throughout the Salinas Valley has resulted in undesirable effects of unsustainable water use, such as surface water depletion, groundwater level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface water and groundwater resources. To meet water demands and reduce undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and a variable climate. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resource Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley Hydrogeologic system called the Salinas Valley System Model. The Salinas Valley Geologic Framework was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The Salinas Valley Watershed Model simulates the entire Salinas River watershed. Monthly surface water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

EarthArXiv↗
USGS2024

The Europa Imaging System (EIS) investigation

The Europa Imaging System (EIS) consists of a Narrow-Angle Camera (NAC) and a Wide-Angle Camera (WAC) that are designed to work together to address high-priority science objectives regarding Europa’s geology, composition, and the nature of its ice shell. EIS accommodates variable geometry and illumination during rapid, low-altitude flybys with both framing and pushbroom imaging capability using rapid-readout, 8-megapixel (4k × 2k) detectors. Color observations are acquired using pushbroom imaging with up to six broadband filters. The data processing units (DPUs) perform digital time delay integration (TDI) to enhance signal-to-noise ratios and use readout strategies to measure and correct spacecraft jitter. The NAC has a 2.3° × 1.2° field of view (FOV) with a 10-μrad instantaneous FOV (IFOV), thus achieving 0.5-m pixel scale over a swath that is 2 km wide and several km long from a range of 50 km. The NAC is mounted on a 2-axis gimbal, ±30° cross- and along-track, that enables independent targeting and near-global (≥90%) mapping of Europa at ≤100-m pixel scale (to date, only ∼15% of Europa has been imaged at ≤900 m/pixel), as well as stereo imaging from as close as 50-km altitude to generate digital terrain models (DTMs) with ≤4-m ground sample distance (GSD) and ≤0.5-m vertical precision. The NAC will also perform observations at long range to search for potential erupting plumes, achieving 10-km pixel scale at a distance of one million kilometers. The WAC has a 48° × 24° FOV with a 218-μrad IFOV, achieving 11-m pixel scale at the center of a 44-km-wide swath from a range of 50 km, and generating DTMs with 32-m GSD and ≤4-m vertical precision. The WAC is designed to acquire three-line pushbroom stereo and color swaths along flyby ground-tracks.

Space Science Reviews↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2026

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes substantially to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides substantial volumes of agricultural products not just for California but for the United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface-water and groundwater resources in the valley. This situation has resulted in water management challenges in the Salinas Valley that generally relate to the distribution of the water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. Historically, to deal with the distribution issue, water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface-water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface-water supplies are insufficient. The availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand for groundwater and surface-water resources throughout the Salinas Valley has resulted in undesirable effects from unsustainable water use, such as surface-water depletion, groundwater-level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface-water and groundwater resources. To meet water demands and reduce the undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and climate variability. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resources Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley hydrogeologic system called the Salinas Valley System Model. The geologic framework is known as the Salinas Valley Geologic Framework and was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The surface-water model is called the Salinas Valley Watershed Model and simulates the Salinas River watershed. Monthly surface-water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

California↗