SEARCH · USGS Science

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources

USGS2017

A swath across the great divide: Kelp forests across the Samalga Pass biogeographic break

Biogeographic breaks are often described as locations where a large number of species reach their geographic range limits. Samalga Pass, in the eastern Aleutian Archipelago, is a known biogeographic break for the spatial distribution of several species of offshore-pelagic communities, including numerous species of cold-water corals, zooplankton, fish, marine mammals, and seabirds. However, it remains unclear whether Samalga Pass also serves as a biogeographic break for nearshore benthic communities. The occurrence of biogeographic breaks across multiple habitats has not often been described. In this study, we examined if the biogeographic break for offshore-pelagic communities applies to nearshore kelp forests. To examine whether Samalga Pass serves as a biogeographic break for kelp forest communities, this study compared abundance, biomass and percent bottom cover of species associated with kelp forests on either side of the pass. We observed marked differences in kelp forest community structure, with some species reaching their geographic range limits on the opposing sides of the pass. In particular, the habitat-forming kelp Nereocystis luetkeana, and the predatory sea stars Pycnopodia helianthoides and Orthasterias koehleri all occurred on the eastern side of Samalga Pass but were not observed west of the pass. In contrast, the sea star Leptasterias camtschatica dispar was observed only on the western side of the pass. We also observed differences in overall abundance and biomass of numerous associated fish, invertebrate and macroalgal species on opposing sides of the pass. We conclude that Samalga Pass is important biogeographic break for kelp forest communities in the Aleutian Archipelago and may demark the geographic range limits of several ecologically important species.

Alaska↗

USGS2007

Mercury speciation in piscivorous fish from mining-impacted reservoirs

Guadalupe Reservoir (GUA), California, and Lahontan Reservoir (LAH), Nevada, U.S. are both affected either directly or indirectly by the legacy of gold and silver mining in the Sierra Nevada during the nineteenth century. Analysis of total mercury in fish from these lentic systems consistently indicate elevated concentrations (>1 μg·g-1 wet weight; hereinafter, all concentrations are reported as wet weight unless indicated otherwise) well above the U.S. Environmenal Protection Agency's human consumption advisory level for fish (<0.3 μg·g-1). Replicate X-ray absorption near edge structure (XANES) analyses on largemouth bass and hybrid striped bass from GUA and LAH were performed to determine predominant chemical species of mercury accumulated by these high-trophic-level piscivores that are exposed to elevated mercury through trophic transfer in mining-impacted lentic systems. Despite distinct differences in mercury source, the proximity of the source, and concentrations of complexing ligands, results of XANES analysis clearly indicated that mercury accumulated in these individual fish from the two reservoirs were dominated by methylmercury cysteine complexes. These findings are consistent with results from commercial fish species inhabiting marine environments which are presumed to include differing mercury sources (e.g., atmospheric, hydrothermal, or benthic). The dominance of methylmercury cysteine complexes in muscle tissues of fish obtained from such contrasting environments and exposure conditions suggests that a generic toxicological model for the consumption of fish could be applicable over a wide range of ecologic settings.

Environmental Science & Technology↗

USGS1975

Diagenesis of Miocene siliceous shales, Temblor Range, California

Siliceous Monterey Shale and related shales of the Temblor Range, Calif., are subdivided into three depth-controlled zones characterized by different forms of silica. These are, in descending stratigraphic order: (1) Biogenic opal zone, with remains of diatoms and other siliceous organisms, (2) diagenetic cristobalite zone, and (3) diagenetic quartz zone. Using the top of the youngest marine unit, the overlying Etchegoin Formation, as datum, the transition from biogenic opal to disordered cristobalite occurs within the Monterey Shale of Chico Martinez Creek at -730 m, and the ordered cristobalite-to-microquartz transition at about -2,030 m. Temperatures that prevailed at these transition depths while the sedimentary pile lay at the bottom of the sea are estimated at about 50° and 110°C, respectively. Diagenetic cristobalite manifests, downward through a 1,300-m interval of section, a progressive decrease in its d (101) spacing because of a gradual ordering of its internal structure through adjustments in the solid state. Diagenetic microquartz forms only from well-ordered cristobalite that provides the most appropriate concentration of dissolved silica for precipitation of microquartz. Scanning electron micrographs of the silica mineral in pores of rocks made up of disordered cristobalite show aggregates of well-formed bladed crystals, like those described from deep-sea cherts. The pore silica minerals in rocks made up of ordered cristobalite occur as dendritic growths of poorly formed stubby crystals, and the change in crystal habit could be an external expression of the internal ordering process.

California↗

USGS2016

10,000 m under the sea: An overview of the HADES expedition to Kermadec Trench

The hadal zone of the world oceans (6000– 11,000 m) occupies <1% of the marine realm and is found almost exclusively in trenches but represents ~40% of the total ocean depth range. Jamison et al. (2010 & Jamison, 2015) have reviewed the current state of knowledge about the hydrology, physical characteristics, food supply, ecology and biodiversity of life in hadal trenches. This review concluded that, there appears to be a high level of endemism based on the few specimens collected from historical sampling efforts in the 1950s (Danish Galathea and Soviet Vitjaz expeditions), but because trenches are still largely unexplored there is a lot we do not know about the ecological structure and functioning of hadal environments. However, relatively recent advances in technology using remotely operated vehicles (ROV) and landers can help us explore hadal trenches in greater detail.

Conference Paper↗

USGS2021

Extreme events trigger terrestrial and marine ecosystem collapses: A tale of two regions

We outline the multiple, cross-scale, and complex consequences of terrestrial and marine ecosystem heatwaves in two regions on opposite sides of the planet: the southwestern USA and southwestern Australia, both encompassing Global Biodiversity Hotspots, and where ecosystem collapses or features of it have occurred in the past two decades. We highlight ecosystem shifts that have clearly demonstrated a substantial change from a baseline state over time, although not necessarily across their entire distribution, with evidence of collapse at local scales. Responses to temperature extremes, such as heatwaves, encompass processes at all scales, including population level (e.g. altered demography such as survival, recruitment, and fecundity, together resulting in structural changes), community level (e.g. species compositional shifts), and ecosystem level (e.g. carbon loss), as well as physical properties altered by vegetation loss (e.g. microclimate, fire behaviour on land). These changes impact all trophic levels with foundational species losses (such as seagrasses, kelp, and trees), flowing through to vertebrates (such as sea turtles, penguins, and cockatoos). Where extensive collapse has occurred, shifts in microclimate could affect important biosphere-to-atmosphere feedbacks including fluxes of energy, carbon, and water. Such extensive changes usually do not occur in isolation and frequently interact with other disturbance processes such as fire, storms, pathogen and pest outbreaks, and anthropogenic stressors. Interactions may alter the likelihood, extent, or severity of subsequent disturbances (linked disturbances) as well as condition the ecological response and recovery (compound disturbances). In addition, if ecosystem collapse is extensive enough (e.g. tree die-off), those changes also can impact climate and ecosystems elsewhere via ecoclimate teleconnections. Increasing rates of climatic extremes will drive a host of direct and indirect feedbacks certain to produce large-scale shifts in ecological functioning at unprecedented rates. Understanding how, why, and where these shifts will occur will be critical for effective ecosystem management and climate change mitigation.

Book chapter↗

USGS1950

Geology and paleontology of the Santa Maria district, California

Stratigraphy, paleontology, and geologic history.-A basement' consisting of igneous rocks of the Jurassic(?) Franciscan formation and sediments of the Upper Jurassic Knoxville formation, and formations of Tertiary and Quaternary age are exposed in the Santa Maria district. The outcrop section, exclusive of the Franciscan, has a maximum thickness of about 10,000 feet, the subsurface section about 27,000 feet. At no locality, however, is either outcrop or subsurface section as thick as the total maxima for the formations. The outcrop Franciscan is made up of altered basalt, gabbro (generally- greatly altered), and minor areas of peridotite and serpentine. The marine Knoxville formation, consisting of shale, thin-bedded calcareous sandstone, and conglomerate, was deposited on the igneous rocks of the Franciscan. It has an outcrop thickness of about 500 feet and a known subsurface thickness of at least 1,250 feet. Aucella cf. A. piochii, which occurs in both outcrop and subsurface sections, suggests late Jurassic age. The Franciscan and Knoxville were probably uplifted during Taliaferro's Diablan orogeny at the close of the Jurassic and formed a land area that presumably endured during early Cretaceous and perhaps during much of late Cretaceous time. If sediments were laid down while 10,000 feet of Upper Cretaceous were deposited in the adjoining San Rafael Mountains, they were eroded following uplift at the close of the Cretaceous, when Reed and Hollister's San Rafael uplift was formed. The district is inferred to have been part of a Franciscan and Knoxville land area at the south border of the San Rafael uplift during all of early Tertiary time. The known history of the district as part of a Tertiary basin began in the early Miocene(?), possibly a little earlier or possibly 3: little later, when the nonmarine sediments of the early Miocene(?) Lospe formation were deposited. The Lospe formation has a maximum thickness of 2, 700 feet, and is made up of coarse-grained reddish sandstone and conglomerate, and greenish sandstone, gypsiferous siltstone, and mudstone. White tuff is a minor but conspicuous constituent. The Lospe formation overlies the Knoxville, or· overlaps it and rests on the Franciscan. The first known Tertiary invasion of the sea took place immediately thereafter in early middle Miocene time, and from then on until approximately the end of the Pliocene the sea occupied continuously at least most of the region. The extent of the Miocene basin is not certainly known, but it was part of an extensive· basin that has been designated the Santa Barbara embayment. The early middle Miocene Point Sal formation is the earliest marine Tertiary formation. It has an outcrop thickness of as much as 1,500 feet and a maximum subsurface thickness of 3,600 feet, and consists of siltstone, mudstone, and thin beds of sandstone. The Point Sal formation overlies the Lospe formation without marked discontinuity, or overlaps it and rests on Knoxville or Franciscan. It contains a large foraminiferal fauna representing the Siphogenerina hughesi zone, or the lower part of Kleinpell's Relizian stage. The Monterey shale overlies the Point Sal formation without noticeable discontinuity, or overlaps all the older sedimentary formations and rests on the Franciscan. It has a maximum outcrop thickness of 2,100 feet, but is as much as 5,000 feet thick in some subsurface sections. The Monterey is divided into three mapped members. The lower member is characterized by phosphatic shale and somewhat porcelaneous shale; the middle member by chert and cherty shale; and the upper member by porcelaneous shale, or by both porcelaneous shale and diatomaceous strata. The lower member contains Foraminifera representing the upper part of Kleinpell's Relizian stage and all of his Luisian stage, the middle member a few species indicating the lower part of his Mohnian stage, and the upper member a fauna representing the upper part of the Bolivina hughesi zone, at the top of the Mohnian, and in part a younger unnamed faunal division; that is, the Monterey is of late middle and late Miocene age. The diverse stratigraphic relations of the Lospe and Point Sal formations and Monterey shale along the borders of the Franciscan rocks forming Point Sal Ridge are inferred to be the result of repeated movements during Miocene time in the area of basement rocks west of the district, presumably extending westward beyond the present coast. Toward the close of the Miocene, low ridges appeared on the floor of the sea, ridges that grew during Pliocene time and were destined to become anticlines. At the same time deformation took place in the northeastern part of the district, and elsewhere on some anticlines, or on other structural highs bounded by faults. In those areas the Sisquoc formation overlies the Monterey shale with marked discordance; elsewhere there is no discordance. Two facies of the Sisquoc formation are mapped: a marginal sandstone facies, designated the Tinaquaic sandstone member, and a basin facies. The Tinaquaic sandstone member is 1,400 feet thick and contains megafossils of middle Pliocene age (also early Pliocene just east of the mapped area). It is unconformable on the Monterey. The basin facies, at least 3,000 feet thick in outcrop sections and 5,000 in some subsurface sections, consists of diatomaceous mudstone, other types of diatomaceous ·strata, somewhat porcelaneous mudstone, and porcelaneous shale-deposits that are ordinarily characteristic of the Monterey shale. Even in areas where the two formations are lithologically indistinguishable and conformable, a field basis for differentiating them has been established. The basin facies of the Sisquoc conformably overlies the Monter.ey in outcrop sections, but in some subsurface sections the formations are unconformable, and on the north limb of the Santa Maria Valley syncline the basin facies of the Sisquoc overlaps the Monterey onto the basement, thus forming the overlap trap for the oil in the Monterey in the Santa Maria Valley field. The lower and middle parts of the basin facies contain Foraminifera of the Bolivina obliqua zone. Kleinpell assigned that zone to the lower part of his late upper Miocene Delmontian stage. Assignment to the upper Delmontian, however, appears to be preferable. The upper few hundred feet of the basin facies contain Foraminifera similar to those in the overlying Foxen mudstone and megafossils of middle Pliocene affinities. The basin facies is therefore considered late upper Miocene to middle Pliocene. The submarine ridges were growing during Pilocene time. The Foxen mudstone is missing on them and in the northeastern part of the district. On the north limb of the Santa Maria Valley syncline, the Foxen overlaps the Sisquoc formation and rests on the basement. In the basins between the submarine ridges, the mudstone, siltstone, and fine-grained sandstone of the Foxen (800 feet thick in outcrop sections and as much as 2, 750 in subsurface sections) overlie conformably the Sisquoc formation. In some of the areas where the Foxen is missing as a lithologic unit, it appears to be represented by condensed deposits of phosphatic pellets, mapped with the underlying or overlying Formation, depending on the matrix, or by a condensed section of fine-grained sand, mapped with lithologically indistinguishable sand in the basal part of the overlying formation. Though foraminifera are abundant in the Foxen mudstone, relatively few species are represented. Those from the lower part of the formation may be of middle Pliocene age. Megafossils from the upper part of the Foxen are considered late Pliocene. The formation is therefore assigned to the middle(?) and upper Pliocene. Movements during Pliocene time in the basement area west of Point Sal Ridge are indicated by the occurrence in the western Casmalia Hills of coarse detritus from the Monterey in the upper part of the Sisquoc formation and in the Foxen mudstone. During late Pliocene time, when the Careaga sandstone was deposited, the Pliocene sea had its greatest extent. The region then flooded may be referred to as the Santa Maria basin. Throughout most of the district two mapped members of the Careaga sandstone are differentiated: the Cebada fine-grained member, which has a maximum outcrop thickness of 1,000 feet, and the Graciosa coarse-grained member, 50 to 425 feet thick. Mild deformation continued during the late Pliocene. The Cebada fine-grained member is missing on the embryonic anticlines, where it is overlapped by the Graciosa coarse-grained member. Both members of the Careaga sandstone contain a large megafauna. The nonmarine Paso Robles formation conformably overlies the Careaga sandstone. The Paso Robles consists chiefly of sand and gravel, but clay, marl, and limestone are the most characteristic constituents. The maximum outcrop thickness is 2,000 feet, the estimated maximum subsurface thickness 4,500 feet. The Paso Robles fresh-water fauna is meager, consisting of a few species similar to living forms. The formation is currently assigned to the interval including late Pliocene and early Pleistocene(?). The age assignment late Pliocene(?) and early Pleistocene, however, may be preferable for the Santa Maria district. Then followed the only period of strong general deformation in the known Tertiary and Pleistocene history of the district. The present structural features of the district were formed at that time, and the submarine ridges appeared as fully formed anticlines. Dating of the deformation is uncertain, because of uncertainty concerning the age of the Paso Robles formation. It is, however, without much doubt of the same age as the welldated strong middle Pleistocene deformation in the Ventura basin. Terrace deposits, laid down on both wave-cut and stream-cut platforms, are rather arbitrarily assigned to the late Pleistocene. The oldest and most extensive terrace deposits, not more than 100 feet thick, are designated the Orcutt sand. The Orcutt sand itself is tilted as much as 12° on the limbs of anticlines and is faulted on the north limb of the Graciosa anticline, indicating renewed growth of the anticlines, presumably in late Pleistocene time. Terrace deposits apparently younger than the Orcutt sand are arched in a low anticline west of lower Foxen Canyon. Structure.-Santa Maria Valley is the boundary between two structural provinces. To the north, valleys and hills are either synclines or anticlines. To the south, on the contrary, major valleys coincide generally with major synclines, and the hills are anticlinal. Santa Maria Valley itself is a syncline. Unlike valleys farther south in the district, however, it lies athwart an older uplift. Also unlike most of the valleys farther south, the axis of the syncline is not in the middle of the valley, but is far to the south near the bordering hills. Indeed, in the western Casmalia Hills, the anticline in the bordering hills is overturned and overrides the axis of the syncline. The major structural features of the district have a general west-northwestward trend parallel to the trend of the basin. Minor westward-trending and northward-trending folds and faults, however, extend across the trend of the major features. The district includes areas of wide, open folds and also areas of narrow, closely spaced, and steeply tilted folds, as well as some major overturned anticlines, most of the latter overturned northward. The closely spaced folds coincide almost invariably with outcrops of the Monterey shale and Point Sal formation. Physiography.-The surface on which the terrace deposits, designated the Orcutt sand, were deposited is extensive but is locally deformed, and only remnants are preserved. Toward the coast it changes from a stream-cut surface to a wave-cut surface. In the coastal area three main marine terraces are recognized: the high terrace (altitude about 800 feet), the intermediate terrace (altitude about 600 feet), and the low terrace (altitude 50 to 125 feet). An indurated layer is present at or near the surface at many localities scattered throughout the district. It is suggested that the indurated layer is an ancient hardpan, the incomplete skeleton of a former soil profile developed on a former surface of less relief than the present surface. Sand dunes extend inland from the coast at the north and south borders of the mapped area. They are classified under three age groups: old, intermediate, and modern. The old dunes, which have a protective cover of natural vegetation and are now inactive, are far more extensive than those of the other two groups. They cover many square miles on a terrace bordering Santa Maria Valley, and extend 20 miles inland. It has not been determined whether their inactivity is due to a cutting off of the supply of sand, or to a climatic change. Occurrence of oil.--Oil has been produced in the Santa Maria district since 1901, the total production to the end of 1947 being 269,657,000 barrels. Throughout the district most of the oil is heavy. Seven producing fields are located in the mapped area. In order of discovery from oldest to youngest the fields are as follows: Orcutt, Lompoc, West Cat Canyon, East Cat Canyon, Casmalia, Gato Ridge, and Santa Maria Valley. The Santa Maria Valley field is the largest in both area and productive capacity. It is the largest overlap field in coastal California, and one of the last major fields found in the State up to 1947. The Las Flores (Monterey) pool is transforming the West Cat Canyon field into one of the major fields of the district. The Monterey shale is the chief oil-bearing formation, and the principal reservoir in the Monterey consists of fractured chert and cherty shale. Sand in the Sisquoc formation is the sole reservoir in the minor East Cat Canyon field and in the Pliocene pool of the West Cat Canyon field. The Point Sal formation yields some oil in the southeastern part of the Santa Maria Valley field (the only part of that field where the formation is present) and a recent well in the Casmalia field is producing a small amount of relatively light oil from the Point Sal. The Lospe formation is also productive in a recent well in the Casmalia field. The Knoxville formation is productive in three areas in the northern part of the Santa Maria Valley field. The Point Sal formation offers the greatest promise for deeper-zone production. The Lospe and Knoxville formations can no longer be ignored in areas where younger marine formations overlap against them. Oil possibilities in undeveloped areas.--Two matters weigh heavily in prospecting in the Santa Maria district: the degree of fracturing of chert and cherty shale in the Monterey shale, and the gravity of the oil. Other things being equal, the productivity of the Monterey varies directly with the amount of fracturing. Very heavy oil, too heavy to produce commercially under present conditions, has befln found ii the Monterey in the northeastern part of the district, where five discoveries (one east of the mapped area) have been made in recent years. Among areas of possible interest, three appear to be favorable for prospecting on the basis of surface geology: an area east of Foxen Canyon, where oil may be trapped in the basal part of the Tinaquaic sandstone member of the Sisquoc formation by westward overlap of successively higher Tinaquaic strata onto the Monterey shale; an area so1tth of the I ... ions Head fault, where oil may be trapped by the fault; and the offshore extension of the north border of Point Sal Ridge, where oil may possibly be trapped in the Monterey by overlap of the Sisquoc formation.

California↗

USGS2005

High-resolution seismic-reflection image of the Chesapeake Bay impact structure, NASA Langley Research Center, Hampton, Virginia

A 1-kilometer-long (0.62-mile-long) seismic reflection and refraction profile collected at the National Aeronautics and Space Administration (NASA) Langley Research Center, Hampton, Va., provides a detailed image of part of the annular trough of the buried, 35-million-year-old Chesapeake Bay impact structure. This profile passes within 5 meters (m; 16.4 feet (ft)) of a 635.1-m-deep (2,083.8-ft-deep), continuously cored and geophysically logged test hole at the Langley Center (the USGS-NASA Langley corehole). High-resolution seismic reflection images (having a common-depth-point spacing of 2.5 m (8.2 ft)) of the upper 1,000 m (3,281 ft) along the seismic profile were generated by using refraction velocities and corehole sonic velocities to convert from time sections to depth sections. Time-distance, unmigrated depth-distance, and migrated depth-distance images show lateral variations in the geologic units observed in the USGS-NASA Langley corehole. A high-amplitude reflection at 630 to 625 m (2,067 to 2,051 ft) depth on the migrated depth image correlates with the top of weathered granite (the Langley Granite) at 626.3 m (2,054.7 ft) in the Langley core. Additional high-amplitude reflections below that depth likely represent a weathering profile developed in the upper part of the granite. Diffractions on the unmigrated images suggest that the granite contains numerous inhomogeneities that may consist of mineral veins and mineralized faults and fractures, as seen in the granite cores. Above the granite, crater unit A (minimally to moderately disturbed sands and clays of the Cretaceous Potomac Formation) is characterized by semicontinuous, horizontal and moderately inclined reflections that are broken by pervasive, subvertical, small-offset faults. Sediments of the lower beds of crater unit A below 558.1 m (1,831.0 ft) in the core have horizontal bedding and are nearly pristine. Above that depth, the upper beds of crater unit A contain thick fluidized sand intervals and fractured clay-silt beds. The contact between the granite and crater unit A is essentially horizontal on the migrated depth profile and shows minor relief produced by a few steeply dipping faults. Above crater unit A, the lower beds of crater unit B are lithologically similar to the upper beds of crater unit A and display similar impact-generated deformation. In the migrated depth image, crater unit A and the lower beds of crater unit B are combined into one unit. A thin zone (0.3 m (1.0 ft) thick) of injected glauconitic sediment at the base of the lower beds (at 442.5 m (1,451.7 ft) depth) is the only occurrence of exotic material in the lower beds of crater unit B in the core. The upper beds of crater unit B (above 427.7 m (1,403.3 ft) depth) are represented by discontinuous, locally weak, isolated, or inclined reflections on the migrated depth image. In the core, the upper beds of crater unit B are divided into megablocks and megablock zones that consist of fragmented sediments of the Potomac Formation. The megablocks are separated by matrix zones that consist of smaller blocks of sediments of the Potomac Formation suspended in a matrix of native disaggregated sediments of the Potomac Formation and injected, exotic disaggregated, glauconitic Upper Cretaceous and lower Tertiary marine sediments. Angular relationships and offsets of reflections across the high-relief contact between the upper beds of crater unit B and the underlying combined crater unit A and the lower beds of crater unit B suggest that the contact is a dip-slip fault locally. Above a contact with crater unit B at a depth of 269.4 m (884.0 ft), the Exmore beds are represented by strong, continuous and discontinuous, overstepping reflections that suggest division of the Exmore into four laterally discontinuous depositional subunits. Two of these subunits are present near the Langley corehole on the seismic images and are recognized in the core (Gohn and others, this volume, chap. C). In the Langley core, the Exmore beds consist of clasts of Cretaceous and Tertiary preimpact sediments and cataclastic, shocked, pre-Mesozoic igneous rocks suspended in a matrix of calcareous, muddy, quartz-glauconite sand and granules that contains shocked quartz. The dipping, truncated, and disrupted reflections within crater units A and B are interpreted to represent a 550-m-wide (1,805-ft-wide), stratabound collapse structure. This structure does not affect the underlying basement granite or the lower beds of crater unit A, nor does it affect the base of the Exmore beds above crater unit B. The collapse structure is not bounded laterally by major normal faults. Instead, structural displace ments appear to be distributed among abundant short, smalloffset faults and intervals of fluidized sediment. Fluidized sands above 558 m (1,831 ft) depth in crater unit A are interpreted as a low-strength zone that accommodated the widespread, latestage, gravitational collapse of the impact structure. The pro posed Langley collapse structure may be analogous to stratabound grabens in the outer zone of the Silverpit crater (North Sea). The Exmore beds are interpreted as impact-generated, ocean-resurge deposits. The upper contact of the Exmore section is a wavy, semicontinuous reflection that may represent large bedforms produced by resurge currents or returning impact-generated tsunamis, or it may represent the unmodified blocky or hummocky top of the final Exmore debris flow. Typically continuous, nearly horizontal reflections characterize the upper Eocene to Pleistocene postimpact section of dominantly marine sediments.

Virginia↗

USGS1934

Part 1. The coal field from Gallup eastward toward Mount Taylor, with a measured section of pre-Dakota(?) rocks near Navajo Church

The report describes the geology and coal deposits of the southwestern part of the San Juan Basin, N.Mex. The field lies northeast of the town of Gallup, on the Atchison, Topeka & Santa Fe Railway, and is an irregular tract of about 630 square miles in central and west-central McKinley County; it includes the southeast corner of the Navajo Indian Reservation. Settlement is confined to the white families at a few trading posts and the Indian agency at Crown Point and to scattered Navajo Indians. The land forms, drainage, vegetation, and climate are those typical of the highland in the semiarid Southwest. The investigation disclosed complicated relations of the Mancos shale and the Mesaverde formation, of Upper Cretaceous age, and a marked variation in the stratigraphic boundary between them. At the western edge of the field, as in the adjoining Gallup coal district, the Mancos consists of about 725 feet of marine shale almost wholly of Benton (lower Colorado) age. It is overlain by about 1,800 feet of chiefly estuarine and fluviatile deposits that represent the lower part of the Mesaverde formation. In ascending order the Mesaverde here consists of the Gallup sandstone member (which includes local lenses of valuable coal), the Dilco coal member, the Bartlett barren member, the Gibson coal member, and the Allison barren member. Eastward through the field the outcrops extend obliquely across the trend of old shore lines out into the ancient basin of marine deposition, and some of the beds consequently show a progressive lateral change into rocks of littoral and marine types. The Gallup sandstone member is in part replaced by marine shale of the Mancos. The upper part of the Dilco coal member is replaced by the Dalton sandstone member, and still farther east the bottom of the Dalton and the top of the remaining Dilco are replaced by the Mulatto tongue of the Mancos shale. The Bartlett barren member becomes coal-bearing and thus merges with the Gibson. The Gibson coal member is split by the thick Hosta sandstone member, which toward the east and northeast is in turn split by the Satan tongue of the Mancos shale, of upper Niobrara (upper Colorado) age. In general the structure of the rocks is simple, showing a gentle northward dip into the San Juan Basin. At the west edge of the field the rocks dip steeply west in the north end of the prominent ridges known locally as the Hogback. In the eastern part there is a series of pronounced folds, whose crests and troughs retain the gentle basinward dip but whose limbs are steep monoclines that in places are faulted. The coal is of subbituminous rank and of fairly good grade. The coal beds are very irregular and lenticular. Those in the Gallup and Dilco members are of comparatively little importance, reaching a thickness of 4 to 5 feet in only a few places and, in general, being less than 3 feet thick. The coal beds of the Gibson, especially of its lower part, are more numerous and thicker, measurements of 4 to 6 feet thick being fairly common and one bed showing a thickness of 12 feet for more than a mile. No commercial mining has been undertaken in this field, but a few small mines have been used to supply trading posts and the Indian schools at Crown Point and Tohatchi.

New Mexico↗

USGS2008

Benthic invertebrates and periphyton in the Elwha river basin: Current conditions and predicted response to dam removal

The impending removal of two dams on the Elwha River in Washington State offers a unique opportunity to study ecosystem restoration at a watershed scale. We examine how periphyton and benthic invertebrate assemblages vary across regulated and unregulated sections of the Elwha River and across different habitat types, and establish baseline data for tracking future changes following dam removal. We collected multiple years of data on physical habitat, water chemistry, periphyton, and benthic invertebrates from 52 sites on the Elwha River and a reference section on the Quinault River, a neighboring basin. We found that substrate in regulated river sections was coarser and less heterogeneous in size than in unregulated sections, and summer water temperature and specific conductivity higher. Periphyton biomass was also consistently higher in regulated than unregulated sections. Benthic invertebrate assemblage structure at sites above both dams was distinct from sites between and below the dams, due in large part to dominance of mayfly taxa compared to higher relative abundance of midges and non-insect taxa at downstream sites. Following dam removal, we anticipate that both periphyton and benthic invertebrate abundance and diversity will temporarily decrease between and below dams as a result of sediment released from behind the reservoirs. Over the long-term, increased floodplain heterogeneity and recolonization by anadromous fish will alter benthic invertebrate and periphyton assemblages via increases in niche diversity and inputs of marine-derived nutrients. The extended timeline predicted for Elwha River recovery and the complexities of forecasting ecological response highlights the need for more long-term assessments of dam removal and river restoration practices.

Northwest Science↗

USGS2012

Archive of digital chirp subbottom profile data collected during USGS cruise 10BIM04 offshore Cat Island, Mississippi, September 2010

In September of 2010, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE), conducted a geophysical survey to investigate the geologic controls on barrier island framework of Cat Island, Miss., as part of a broader USGS study on Barrier Island Mapping (BIM). These surveys were funded through the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project as part of the Holocene Coastal Evolution of the Mississippi-Alabama Region Subtask. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 10BIM04 tells us the data were collected in 2010 during the fourth field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID). All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-512i system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy; it was housed within a float system (built at the SPCMSC), which allows the towfish to be towed at a constant depth of 1.07 meters (m) below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, some energy is reflected back toward the transducer, received, and recorded by a Personal Computer (PC)-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)), and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in American Standard Code for Information Interchange (ASCII) format instead of Extended Binary Coded Decimal Interchange Code (EBCDIC) format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software, and they can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software.

Mississippi↗

USGS1981

Progradational sequences in Miocene shoreline deposits, southeastern Caliente Range, California

An exceptionally well exposed marine-nonmarine transition in middle Miocene strata exists in the southeastern Caliente Range, California. About 50 individual progradational sequences form a succession that ranges in thickness from approximately 1000 m (where predominantly nonmarine) to more than 2500 m (where predominantly marine). Paleogreographic evidence in basalt flows near the top of the succession and in overlying fluvial deposists indicates that these middle Miocene strata were deposited across a north-northwest trending shoreline. A complete progradational sequence typically is several meters to a few tens of meters thick and includes strata that represent three intertonguing stratigraphic units. Individual sequences generally rest on a thin gravel deposit interpreted as a transgressive lag on an erosional surface. The gravel is overlain by structureless siltstone or fine-grained sandstone deposited at water depths where the rate of faunal mixing exceeded that of production of structures by physical processes. These rocks grade upward into bedded fine sandstone deposited closer to shore where physical processes exceeded bioturbation. Crossbedded lenses of coarse sand or fine gravel in the upper part of this facies suggest the presence of failry long-period surface waves. The bedded fine sandstone is sharply overlain by a crossbedded coarse sandstone facies that is interpreted as a combined offshore bar-rip channel-surf zone assemblage. Cross-strata dip dominantly offshore, suggesting substantial deposition from rip currents. A secondary, shore=parallel mode of cross-strata direction suggests longshore currents produced by surface waves from the northwest. The crossbedded coarse-grained sandstone grades upward into planar-bedded medium-grained sandstone that is interpreted as a beach foreshore. This facies grades upward through structureless medium-grained sandstone into nonmarine or lagoonal red and green mudstone of the Caliente Formation. The middle Miocene succession was deposited in a subsiding basin that was otherwise remarkably stable tectonically; the position of the strand line differed no more than a few kilometers through a period of 1 to 3 m.y. The average duration of the transgressive-regressive cycles, a few tens of thousands of years, together with their distribution in groups of three or four in the lower two-thirds of the succession, is consistent with the pattern of long-term climatic cycles produced by periodicity of the earth's solar orbit and may be related to eustatic sea level changes attendant to the development of the Antarctic ice cap. Changes in the pattern of progradation in the upper part of the succession and nearby basaltic eruptions may hav been precursors to the onset of movement along the San Andreas fault in this area 12-14 m.y. ago.

California↗

USGS2014

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York↗

USGS2019

Sediment classification and the characterization, identification, and mapping of geologic substrates for the glaciated Gulf of Maine seabed and other terrains, providing a physical framework for ecological research and seabed management

A geologic substrate is a surface (or volume) of sediment or rock where physical, chemical, and biological processes occur, such as the movement and deposition of sediment, the formation of bedforms, and the attachment, burrowing, feeding, reproduction, and sheltering of organisms. Seabed mapping surveys in the Stellwagen Bank region off Boston, Massachusetts, from 1993 to 2004 have led to the development of a methodology for characterizing, identifying, and mapping geologic substrates. The resulting high-resolution interpretive maps (1:25,000) show the distribution of substrates in a glaciated terrain of banks and basins in water depths of 30 to 185 meters. Data sources used to characterize substrates are multibeam sonar bathymetric and backscatter imagery to document seabed topography and patterns of sediment and rock distribution, grain-size analyses of sediment samples to determine substrate composition, and video and photographic imagery of the seabed to aid in the interpretation of multibeam sonar imagery and to provide information on substrate layering and mobility, seabed structures, and sediments and nonsediment materials that cannot be physically sampled. Sediment composition is a major property of many seabed substrates. Sediment grains belong to a continuum of grain-diameter sizes previously classified into grades (for example, fine sand, medium sand) and into aggregates (mud, sand, gravel). The definition of grade and aggregate boundaries in a classification is arbitrary, and a useful classification is limited to as few classes as are needed to effectively organize and apply information. For the purpose of mapping substrates, sediment grades and aggregates were simplified and re-classified into eight composite grades based on grain-size content, mode of transport, and ecological role. Five composite grades are identified using grain-size analysis and three are identified using video and photographic imagery of the seabed. Naturally occurring sediments contain various amounts of the aggregates mud, sand, and gravel. The separation of naturally occurring sediments into sediment classes, based on grain-size analysis, requires that limits be set on the amount of mud, sand, and gravel each class contains. Fifteen previously identified basic sediment classes provided interpretive information on sediment transport by emphasizing gravel content (a low 0.01-weight-percent threshold) and on winnowing processes based on the sand-to-mud ratio. The present study recognizes 20 basic sediment classes that are combinations of aggregates in which the lower limits for recognition of mud and sand are 10 weight percent and of gravel, 25 weight percent. These sediment classes can be made more specific by listing their content of the composite grades fine-grained sand (3 and 4 phi), which is transported in suspension, and coarse-grained sand (0, 1, and 2 phi), which is transported as bedload. Additional sediment classes and nonsediment classes that cannot be sampled are recognized on the basis of visual analysis of seabed video and photographic imagery and include pebble, cobble, and boulder gravel, rock outcrops, and shell beds, among others. Substrates are not classified because their properties are too varied for a classification to be concise and useful. Rather, substrates are characterized and identified by sediment grain-size composition (the sediment class); the distribution, in millimeters, of grain diameters in the sediment; the presence of nonsediments (for example, rock outcrops); substrate mobility based on the presence of sediment ripples; substrate layering (for example, a partial veneer of sand on gravel); and seabed structures. These properties have interpretive value by providing information about sedimentary processes acting on a substrate and about its ecological function. A geologic substrate, when it is associated with one or more species, is an important element of a habitat. This methodology was developed to map a glaciated terrain characterized by geologic substrates that typify a wide range of erosional and depositional sedimentary environments, and it likely will be useful for mapping substrates in other terrains. Substrate maps provide the physical framework required for identifying sediment transport processes, validating sediment transport models, studying the ecology of species and communities, and managing marine resources and seabed usage.

Massachusetts↗

USGS1973

Shallow structure and geologic development of the Southern Red Sea

A series of 34 shallow-penetration seismic-reflection profiles made across the Red Sea show that it developed in two main stages. Initially, an early or pre-Miocene uplift and lateral extension resulted in crustal thinning and eventual formation of the main Red Sea Basin. During Miocene time, the Red Sea was isolated from the Indian Ocean but possibly connected with the Mediterranean Sea, which, like the Red Sea, was an evaporite basin at that time. A distinct acoustic reflector (reflector S) in the Red Sea marks the top of the Miocene evaporite sequence and is correlative with reflector M in the Mediterranean, which is similarly identified with termination of evaporite conditions. In Pliocene time, connection with the Indian Ocean was re-established, the opening to the Mediterranean was closed, and normal marine conditions were resumed in the Red Sea. Sea-floor spreading first started in Pliocene-Pleistocene time, and resulted in the formation of the axial zone of the Red Sea.

GSA Bulletin↗

USGS1988

Methane hydrate - A major reservoir of carbon in the shallow geosphere?

Methane hydrates are solids composed of rigid cages of water molecules that enclose methane. Sediment containing methane hydrates is found within specific pressure-temperature conditions that occur in regions of permafrost and beneath the sea in outer continental margins. Because methane hydrates are globally widespread and concentrate methane within the gas-hydrate structure, the potential amount of methane present in the shallow geosphere at subsurface depths of < ???2000 m is very large. However, estimates of the amount are speculative and range over about three orders of magnitude, from 2 ?? 103 to 4 ?? 106 Gt (gigatons = 1015 g) of carbon, depending on the assumptions made. The estimate I favor is ??? 1 ?? 104 Gt of carbon. The estimated amount of organic carbon in the methane-hydrate reservoir greatly exceeds that in many other reservoirs of the global carbon cycle - for example, the atmosphere (3.6 Gt); terrestrial biota (830 Gt); terrestrial soil, detritus and peat (1960 Gt); marine biota (3 Gt); and marine dissolved materials (980 Gt). In fact, the amount of carbon may exceed that in all fossil fuel deposits (5 ?? 103 Gt). Because methane hydrates contain so much methane and occur in the shallow geosphere, they are of interest as a potential resource of natural gas and as a possible source of atmospheric methane released by global warming. As a potential resource, methane hydrates pose both engineering and production problems. As a contributor to a changing global climate, destabilized methane hydrates, particularly those in shallow, nearshore regions of the Arctic Ocean, may have some effect, but this effect will probably be minimal, at least during the next 100 years. ?? 1988.

Chemical Geology↗

USGS1996

Planar PCB Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review

Ecological and toxicological aspects of polychlorinated biphenyls (PCBs) in the environment are reviewed with emphasis on biologically active congeners and fish and wildlife. Subtopics include sources and uses, chemical and biochemical properties, concentrations in field collections, lethal and sublethal effects, and recommendations for the protection of sensitive resources. All production of PCBs in the United States ceased in 1977. Of the 1.2 million tons of PCBs manufactured to date, about 65% are still in use in electrical equipment and 31% in various environmental compartments, and 4% were degraded or incinerated. The 209 PCB congeners and their metabolites show wide differences in biological effects. A significant part of the toxicity associated with commercial PCB mixtures is related to the presence of about 20 planar congeners, i.e., congeners without chlorine substitution in the ortho position. Toxic planar congeners, like other PCB congeners, have been detected in virtually all analyzed samples, regardless of collection locale. Planar PCB concentrations were usually highest in samples from near urban areas and in fat and liver tissues, filter-feeding bivalve mollusks, fish-eating birds, and carnivorous marine mammals. Adverse effects of planar PCBs on growth, survival, and reproduction are highly variable because of numerous biotic and abiotic modifiers, including interaction with other chemicals. In general, embryos and juveniles were the most sensitive stages tested to planar PCBs, and the chinook salmon, domestic chicken, mink, rhesus macaque, and laboratory white rat were among the most sensitive species. for protection of natural resources, most authorities now recommend (1) analyzation of environmental samples for planar and other potentially hazardous congeners; (2) exposure studies with representative species and specific congeners, alone and in combination with other environmental contaminants; (3) clarification of existing structure-induction-metabolism relations; and (4) more research on physiological and biochemical indicators of PCB-stress.

Contaminant Hazard Reviews↗

USGS2010

Patterns of use and distribution of king eiders and black scoters during the annual cycle in northeastern Bristol Bay, Alaska

Northeastern Bristol Bay, Alaska, which includes three large estuaries, is used by multiple sea duck species during the annual cycle. Limited aerial surveys indicate that this area supports tens of thousands of king eiders and black scoters during spring migration and the autumn molt. Existing satellite telemetry data were used to assess the temporal patterns of habitat use and spatial distribution of king eiders and black scoters in northeastern Bristol Bay throughout the annual cycle. King eiders used northeastern Bristol Bay during all months of the annual cycle and black scoters used the area during spring through fall. Both species exhibited a similar seasonal pattern of use that corresponded with the timing of life-cycle stages. Abundance of both species was highest during spring migration and the autumn molting period and lowest during summer. Use by king eiders did not occur during all winter months in every year of the study. King eiders were more broadly distributed than black scoters and were located farther from shore in deeper water. Core use areas had minimal overlap, suggesting a degree of spatial segregation between species and a preference for different habitats in northeastern Bristol Bay. Further study of potential variation in invertebrate community structure that may correlate with the observed interspecific spatial segregation in habitat use is needed to determine preferred forage and describe habitat requirements for each species. Such information is necessary to assess the potential impact that future anthropogenic or environmental changes may have on habitat quality of northeastern Bristol Bay and demography of Pacific sea duck populations that use this area.

Alaska↗

USGS1992

Pesticide residues in ground water of the San Joaquin Valley, California

A regional assessment of non-point-source contamination of pesticide residues in ground water was made of the San Joaquin Valley, an intensively farmed and irrigated structural trough in central California. About 10% of the total pesticide use in the USA is in the San Joaquin Valley. Pesticides detected include atrazine, bromacil, 2.4-DP, diazinon, dibromochloropropane, 1,2-dibromoethane, dicamba, 1,2-dichloropropane, diuron, prometon, prometryn, propazine and simazine. All are soil applied except diazinon. Pesticide leaching is dependent on use patterns, soil texture, total organic carbon in soil, pesticide half-life and depth to water table. Leaching is enhanced by flood-irrigation methods except where the pesticide is foliar applied such as diazinon. Soils in the western San Joaquin Valley are fine grained and are derived primarily from marine shales of the Coast Ranges. Although shallow ground water is present, the fewest number of pesticides were detected in this region. The fine-grained soil inhibits pesticide leaching because of either low vertical permeability or high surface area; both enhance adsorption on to solid phases. Soils of the valley floor tend to be fine grained and have low vertical permeability. Soils in the eastern part of the valley are coarse grained with low total organic carbon and are derived from Sierra Nevada granites. Most pesticide leaching is in these alluvial soils, particularly in areas where depth to ground water is less than 30m. The areas currently most susceptible to pesticide leaching are eastern Fresno and Tulare Counties. Tritium in water molecules is an indicator of aquifer recharge with water of recent origin. Pesticide residues transported as dissolved species were not detected in non-tritiated water. Although pesticides were not detected in all samples containing high tritium, these samples are indicative of the presence of recharge water that interacted with agricultural soils.

Journal of Hydrology↗