USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Freshwater Ecology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 38Linked to original sources
USGS2026

Making many out of one: Synthetic geologic deformation model distributions for use in USGS NSHM25‐PRVI Puerto Rico-U.S. Virgin Island update

A key use‐case of geologic slip rates is within deformation models used in probabilistic seismic hazard analyses. Field‐derived geologic slip rates have formed the cornerstone of deformation models in such applications for decades. Recent advancements in seismic hazard analyses have expanded the use of faults for which geologic slip rates are not well constrained using categorical slip rate estimates. Because of these advancements, application of a geologic deformation model for use in 2025 U.S. Geological Survey National Seismic Hazard Model Puerto Rico‐U.S. Virgin Islands (NSHM25‐PRVI) proved challenging due to: (1) a lack of field‐based geologic slip rates, and (2) a lack of epistemic uncertainty distributions within a broad range of estimated slip rates. Preliminary versions of the NSHM25‐PRVI model sampled these slip rate bins in a coincident manner along preferred and extreme value branches, which yielded untenable correlations in mean hazard results. To minimize the influence of correlated uncertainties amid these challenges, we develop a synthetic epistemic uncertainty distribution for deformation rate on each crustal fault. Each fault has a weighting schema across four possible distribution shapes: uniform, normal, triangular favoring local minima, and triangular favoring local maxima. The synthetic distributions are then sampled several times for each logic tree branch. The results provide a more realistic distribution of rates across the study region as compared with using correlated extrema sampling. This exploration of our method in a small region like PRVI can pave the way for larger‐scale, more complicated applications (e.g., western United States).

Puerto Rico, US Virgin Islands↗
USGS2023

Hydrogeology, karst, and groundwater availability of Monroe County, West Virginia

Monroe County is in southeastern West Virginia, encompassing an area of 474 square miles. The area consists of karst and siliciclastic aquifers of Ordovician, Silurian, Devonian, and Mississippian age and is in parts of two physiographic provinces: the Valley and Ridge Province to the east of Peters Mountain, and the Appalachian Plateau Province to the west of Peters Mountain. This study was developed in response to inquiries from the Monroe County Commission requesting assessment of the water resources of the county to better understand the quantity of the county’s groundwater resources, for both current [2023] and future demand, and to provide information to support protection and management of the county’s valuable groundwater resources. Various products were developed for this study that provide knowledge with respect to water availability and contamination susceptibility of the karst aquifers within the county. U.S. Geological Survey (USGS) geologists conducted extensive geologic mapping in support of the project, producing (1) a countywide bedrock geologic map, (2) a countywide hydrogeologic map, and (3) a light detection and ranging (lidar)-derived countywide digital elevation model and associated sinkhole map. A significant part of this work was to map in detail the Greenbrier Group at the formation level, which prior to this study had only partially been completed. The report also includes (4) a description of the lithologic units identified as part of the geologic mapping process. U.S. Geological Survey hydrologists completed several additional products for the hydrology part of the effort, including development of (1) a countywide potentiometric surface (water-table) map, (2) a countywide base-flow stream assessment, (3) countywide water-budget estimates, (4) well log surveys for 15 wells to better understand subsurface controls on groundwater flow within the study area, (5) two groundwater tracer tests to better refine the groundwater divide from the northern and southern parts of the karst aquifer in Monroe County; and finally, based on all available data collected for the study including the potentiometric surface map, geologic map, current [2023] and legacy fluorometric groundwater tracer tests, and base-flow stream assessments, (6) groundwater-basin delineations were reassessed for principal groundwater basins within the Greenbrier aquifer. In Monroe County, four principal hydrogeologic settings produce large yields of water for residential, agricultural, and other uses. The most relied upon water-bearing zone with respect to current [2023] public water supply is from springs along Peters Mountain. These springs are derived from intervals of fractured sandstone and resultant alluvial deposits. Groundwater flows downslope through these permeable alluvial deposits and discharges at the contact with less permeable strata, such as the Reedsville Shale. The second most relied upon water-bearing zone in Monroe County is within the karstic Greenbrier Group aquifer, in which the basal Hillsdale Limestone overlies the less permeable Maccrady Shale. This geologic contact between the Hillsdale Limestone and Maccrady Shale is not only targeted as a source of water for agricultural supply but also is targeted as a source of water for residential supply. The third most relied upon water-bearing zone is composed of shallow perched aquifers within the Greenbrier Group. The discontinuous nature of these perched aquifers makes mapping their extent impossible, but they are related to permeable geologic strata, such as karstified limestones with solutionally enhanced permeability that overlies less permeable shale or chert bedrock. During geologic mapping of the county, several of these perched aquifers were documented in the Pickaway, Union, and Alderson Limestones. A fourth zone consists of springs from Ordovician carbonates at the base of Peters Mountain, which are influenced by sinking streams as well as upwelling along faults. In terms of water quantity, the most sustainable springs are those having deeper-sourced flows. Public supplies are a principal source of water used for residential and commercial supply in the region, accounting for 0.49 million gallons per day (Mgal/d) of fresh-water withdrawals (0.14 Mgal/d of groundwater and 0.35 Mgal/d of surface water) for residential and commercial use and serving 6,645 individuals (49.2 percent of the population). An estimated 6,861 people, (50.8 percent of the population) primarily rely on private wells or other unregulated sources, such as springs, and withdraw 0.55 Mgal/d of groundwater for their residential use. Public water supply in the region is primarily (71.4 percent) derived from springs and augmented by stream withdrawals (backup sources mainly during low-flow periods), with the remaining portion (28.6 percent) derived from groundwater withdrawals from wells. For rural residents, however, 100 percent of their withdrawals are derived from groundwater (wells or springs).

West Virginia↗
USGS2025

Summary of selenium in the lower Gunnison River Basin, Colorado—Information and data gaps

The Cretaceous Mancos Shale is a geologic source of selenium in the lower Gunnison River Basin. Natural weathering processes and human activity mobilize selenium from the Mancos Shale and derived materials, and surface water, groundwater, and sediment all affect the transport of selenium from source areas to receiving streams and biota. Selenium accumulates through the aquatic food chain, and its toxic effects can result in invertebrate mortality and mortality, decreased reproduction, and deformities to fish and birds. The Bureau of Reclamation, in cooperation with the State of Colorado and Gunnison River Basin water users, is implementing a Selenium Management Program to reduce selenium concentrations in the lower Gunnison River Basin of Colorado. Goals of the Selenium Management Program are to (1) achieve compliance with the State of Colorado chronic aquatic-life standard for dissolved selenium (4.6 micrograms per liter) in the Gunnison River near Grand Junction, Colorado; (2) sufficiently improve water-quality conditions to assist in the recovery of endangered species in the Gunnison and Colorado Rivers by reducing selenium concentrations; and (3) support continued water uses in the basin. Many previous studies have contributed to the understanding of selenium in the environment; however, monitoring and research data gaps exist in the lower Gunnison River Basin. The purpose of this report is to summarize information regarding selenium in the lower Gunnison River Basin and describe strategies for scientific research and monitoring to potentially improve understanding of selenium sources; processes affecting the mobilization, transport, and fate of selenium; and the effects of selenium-mitigation projects in the lower Gunnison River Basin. Monitoring and research data gaps discussed in this report include geologic mapping and geochemical source characterization, long-term and ongoing monitoring of the surface-water and groundwater networks, developing and refining statistical models, characterizing selenium on suspended sediment, modeling selenium in the food web, evaluating best management practices, and more.

Colorado↗
USGS2024

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California↗
USGS2026

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗
USGS2026

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of Virginia’s Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis conducted on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore shows that groundwater conditions vary substantially throughout the Coastal Plain aquifer system due to local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have fundamentally altered groundwater flow from pre-development conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers supplying groundwater is a relatively small portion of the total groundwater water budget for the aquifer system. Analyses of groundwater budgets from the Virginia Coastal Plain model show that groundwater flow is generally outward from the surficial aquifer to rivers and coastal water bodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer currently is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from areas outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2025, rates of withdrawal substantially lower than the historical maximum have resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or in adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. Downward groundwater flow continues under current conditions, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, those rates are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Estimated groundwater inflow from coastal regions could be contributing to saltwater intrusion, though that was not measured directly in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, show that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up over 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. Currently, estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The current withdrawal rate from the confined Yorktown-Eastover system is near the highest reported rate for the Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and small rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

EarthArXiv↗
USGS1997

Nutrients and pesticides in ground water of the Ozark Plateaus in Arkansas, Kansas, Missouri, and Oklahoma

A total of 229 ground-water samples were collected from 215 sites as part of the Ozark Plateaus study unit of the National Water-Quality Assessment Program. These samples were collected from 1993 through 1995 using a network of springs and wells with three scale-dependent components. The first component, the study-unit survey, consisted of 99 randomly selected springs and domestic wells in the Springfield Plateau and Ozark aquifers. The second component, two land-use studies, consisted of 42 springs and domestic wells in a poultry-dominated agricultural area and 40 springs and domestic wells in a cattle-dominated agricultural area overlying the Springfield Plateau aquifer. The third component, the small-watershed study, consisted of 4 springs, 18 domestic wells, and 11 monitoring wells in a small basin within the poultry land-use study area. Samples were analyzed for major ions, nutrients, dissolved organic carbon, methylene blue active substances, tritium, and 88 pesticides and metabolites.The water-quality data from these samples were analyzed with descriptive and statistical methods. Nitrite plus nitrate, which was detected more often and in greater concentrations than any of the other nutrients, ranged from less than 0.05 to 25 milligrams per liter as nitrogen. Nitrite plus nitrate concentrations positively correlated to percent agricultural land use around each site. Median nitrite plus nitrate concentrations generally were greater in samples from springs than in samples from wells. Concentrations of nitrite, ammonia, and ammonia plus organic nitrogen were also affected by land use and also by concentrations of dissolved oxygen in the ground water. Concentrations of phosphorus and orthophosphate probably were affected by land use and also by phosphorus solubility. Pesticides were detected in 80 of 229 samples from 73 of 215 sites. A total of 20 pesticides were detected with a maximum of 5 pesticides detected in any 1 sample. The most commonly detected pesticides were tebuthiuron, atrazine, prometon, desethylatrazine, and simazine. Maximum concentrations ranged from 0.003 to 1.0 microgram per liter. The occurrence and distribution of pesticides were related to land use. Percent agricultural land use was greater for samples with pesticides detected than for samples with no pesticides detected. Pesticides were detected more often in samples from springs than in samples from wells. The occurrence of pesticides also was related to seasonality and chemical characteristics, such as solubility and persistence, of the compounds.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS1986

Water-quality appraisal of NASQAN stations below impoundments, eastern Tennessee

The National Stream Quality Accounting Network (NASQAN) is a network of stations at which systematic and continuing water-quality data are collected. Major objectives of this U.S. Geological Survey program are (1) to depict areal variability of streamflow and water-quality conditions nationwide on a year-by-year basis and (2) to detect long-term changes in streamflow and stream quality. Several NASQAN stations in East Tennessee are downstream from impoundments which have a significant effect on water quality. NASQAN data obtained from the Tennessee River below Watts Bar Dam and the Clinch River below Melton Hill Dam were compared to water-quality data from the basins upstream. The comparison indicates that NASQAN data obtained below impoundment may not be adequate to describe a composite picture of water quality in the accounting unit. Detention time of storage in the impoundments is believed to moderate the range of constituent values observed at the NASQAN stations. Data obtained upstream and downstream from Watts Bar Dam indicate that the water sampled at the NASQAN station comes from stratified layers of the impoundment and is not representative of an integrated sample of water from the impoundment. Values of total recoverable iron suggest that, because of adsorption to sediments in impoundments, some constituents are not accurately described by sampling below impoundments. Relations between water-quality constituents and flow at stations on the Clinch River and Tennessee River are not well defined due to regulation. Direct load computations for many constituents were therefore not possible, which diminished the utility of data from these NASQAN stations to account for quantity versus quality of the water. Load computations were only possible for ionic constituents through use of a continuous specific-conductance record as an intermediary. Compensation for the effects of discharge prior to application of the Seasonal Kendall test for trends could not be done and identification of trends in water-quality constituents caused by some process (source) change was not possible. Some water-quality trends indicated by data from the Clinch and Tennessee Rivers might reflect the decreasing trend in discharge during the 1972-82 water years. Thus the stations below Watts Bar Dam and below Melton Hill Dam do not adequately meet the NASQAN objective to detect and assess long-term changes in stream quality.

Tennessee↗
USGS2023

Evaluation of models for estimating hydraulic conductivity in glacial aquifers from NMR logging

Nuclear magnetic resonance (NMR) logging is a promising method for estimating hydraulic conductivity ( K ). During the past ∼60 years, NMR logging has been used for petroleum applications, and different models have been developed for deriving estimates of permeability. These models involve calibration parameters whose values were determined through decades of research on sandstones and carbonates. We assessed the use of five models to derive estimates of K in glacial aquifers from NMR logging data acquired in two wells at each of two field sites in central Wisconsin, USA. Measurements of K , obtained with a direct push permeameter (DPP), K DPP , were used to obtain the calibration parameters in the Schlumberger-Doll Research, Seevers, Timur-Coates, Kozeny-Godefroy, and sum-of-echoes (SOE) models so as to predict K from the NMR data; and were also used to assess the ability of the models to predict K DPP . We obtained four well-scale calibration parameter values for each model using the NMR and DPP measurements in each well; and one study-scale parameter value for each model by using all data. The SOE model achieved an agreement with K DPP that matched or exceeded that of the other models. The Timur-Coates estimates of K were found to be substantially different from K DPP . Although the well-scale parameter values for the Schlumberger-Doll, Seevers, and SOE models were found to vary by less than a factor of 2, more research is needed to confirm their general applicability so that site-specific calibration is not required to obtain accurate estimates of K from NMR logging data.

Wisconsin↗
USGS2025

Analysis of aquifer framework and properties, Alvahs Lane well field, Cutchogue, New York

The U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, evaluated the aquifer transmissivity and storage properties at the Alvahs Lane well field north of the village of Cutchogue, New York. This analysis of aquifer properties provides the Suffolk County Water Authority with hydrogeologic information needed to develop water supplies to meet the increasing water demands of the residents of Suffolk County, New York. An aquifer test was conducted at the Alvahs Lane well field from October 18 through October 21, 2022, when a production well was pumped at 550 gallons per minute for about 24 hours, and groundwater-level drawdown and recovery were measured in two monitoring wells. The three wells are screened in a glaciofluvial aquifer under unconfined (water table) conditions. Drawdown and recovery data were analyzed with an analytical solution for partial penetration and delayed yield in an unconfined aquifer to provide estimates of the glaciofluvial aquifer properties. Inclusion of lateral aquifer boundaries was not necessary for the analysis to result in satisfactory matches with the observed water-level responses. Aquifer transmissivity was estimated at 32,000 feet squared per day. Assuming a saturated aquifer thickness of 120 feet, this result is equivalent to a horizontal hydraulic conductivity value of 270 feet per day. Specific yield was estimated at 0.15 (dimensionless). The estimated properties are consistent with those of a highly transmissive unconfined aquifer.

New York↗
USGS2024

Cross section N–N' through the Valley and Ridge province of the southern Appalachian basin, from Greene County, west-central Alabama, to Bibb County, central Alabama

Introduction Geologic cross section N–N′ is the sixth in a series of geologic cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section N–N′ provides a regional view of the structural and stratigraphic framework of the Appalachian basin in the Valley and Ridge province in western and central Alabama; it spans approximately 69 miles (mi) (111 kilometers [km]). This geologic cross section is a companion to geologic cross sections E–E′ , D–D′ , C–C′ , I–I′ , and A–A′ that are located approximately 350 to 550 mi (563 to 885 km) to the northeast. Cross section N–N' complements earlier geologic cross sections through the Alabama part of the Appalachian basin. Although some of the other cross sections show more structural and stratigraphic detail, they are of more limited extent geographically and stratigraphically. Cross section N–N′ contains information that is useful for evaluating energy resources in the Appalachian basin. Although the Appalachian basin petroleum systems are not shown on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and petroleum migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on what is shown on the cross section. In addition, cross section N–N′ may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Alabama↗
USGS2025

Surficial geology and Quaternary tectonics of the Madison Valley and fault zone, Madison, Gallatin, and Beaverhead Counties, southwest Montana

The north-northwest-striking Madison fault is approximately 95 kilometers in length, lying at the confluence of the northeastern Basin and Range province and the Yellowstone tectonic parabola. The fault zone consists primarily of west-dipping normal faults that have east-dipping antithetic faults, which create the Madison Valley graben and several northeast-trending intrabasin faults. The Madison fault and associated sections discussed herein refer to the main west-dipping, range-bounding fault along the eastern side of the valley. Detailed geologic mapping (1:12,000 scale) of the entire fault zone and fault scarp profiling (total of 102 profiles) of the Madison fault reveal greater late Quaternary paleoseismic activity towards the south, including at least three paleoevents along the southern part of the fault that postdate Pinedale glaciation. Early to middle Holocene alluvial fans have vertical surface offsets that average between 2.0 and 3.0 meters and define the characteristic single-event surface offset. Pinedale lateral moraines have vertical surface offsets as great as 12.0 meters. Late Pleistocene to Holocene multiple-event fault scarps show little evidence of beveling, suggesting short seismic recurrence intervals and potential late Pleistocene and Holocene temporal clustering. Long-term average tectonic activity rates indicate slip rates ranging from 0.18–0.6 millimeters per year. Based on a comparison of fault-scarp height versus maximum slope angle of known regression lines developed from other paleoseismic investigations, the most recent event ranges from 5–1 ka. The northern section of the fault zone is defined by multiple normal faults, which detached the hanging walls of Laramide thrust faults within the Paleozoic and Mesozoic strata. This resulted in the partitioning of extension along multiple preexisting structures and less displacement along individual normal fault strands. Structural controls on lateral propagation of individual paleoevents involve the position of lateral ramps along preexisting Laramide contractional faults. This resulted in greater displacement within the larger basement-cored structures along the southern section of the fault zone, where extension is accommodated by one inferred principal basement-involved normal fault. Inferred east-northeast trending, intrabasin, normal faults within the southern half of the fault zone have no late Pleistocene displacement.

Idaho, Montana, Wyoming↗
USGS2024

Development of USGS NSHMs: Do small changes in hazard imply small changes in risk?

One of the flagship products from the U.S. Geological Survey (USGS) is the National Seismic Hazard Model (NSHM). Since 1976, the NSHM has been periodically updated to reflect newly published earthquake science and provide probabilistic estimates of seismic hazard for the United States. During each update cycle, alternative models are deliberated, analyzed, and documented through logic trees and their corresponding logic tree branch weights. For example, the decision to modify a logic tree branch weight may be influenced by sensitivity analyses of the logic tree branches in their effects on the mean hazard. However, do small changes in traditional measures of hazard imply small changes in risk? In this study, we make use of two update cycles of the USGS NSHMs and a National Bridge Inventory (NBI) from the Federal Highway Administration (FHWA) to explore the preceding question. Specifically, we first identify geographic locations in the conterminous United States in which the change in hazard from one cycle to another is relatively small. Next, we model the seismic risk to highway bridges for these locations and for each update cycle, while simultaneously distinguishing low hazard environments from high hazard environments. These data enable quantitative analysis of how much changes in risk can be expected given small changes in hazard, investigating the importance of risk models in decision-making during development of the USGS NSHMs.

Conference Paper↗
USGS2026

Miocene evolution of the Humboldt Current

Diatom records from the East Pisco Basin (EPB) of southern Peru and offshore Ocean Drilling Program (ODP) Hole 682 A reveal stepwise increases in the primary productivity of the Humboldt Current during the middle and late Miocene. Although diatoms are present back through the late middle Eocene, successively enhanced diatom production occurs during the Miocene in four steps. The first step between 14.2 and 13.8 Ma marks the onset of diatom deposition in the Pisco-0 sequence. A second step at ∼12.9 Ma coincides with a major drop in global sea level during which diatom deposition ceased in the EPB but continued in ODP 682 A as well as in Chile, Ecuador, and Colombia. Beginning at 10.4 to 10.0 Ma, a major increase in diatom sedimentation rates in both the EPB and in ODP 682 A signals an abrupt intensification of the Humboldt Current productivity, which may be related to the closure of the Central American Seaway to deeper water circulation. A fourth step coincides with the transgressive deposition of the diatom-rich Pisco-2 sequence at 8.4 Ma and is enhanced by the onset of the global Late Miocene Biogenic Bloom (8.0–4.5 Ma). Between 7 and 6 Ma, common subtropical diatoms in ODP 682 A contrast with high diatom deposition rates in the EPB, suggesting variable El Niño-La Niña conditions. During this time, fossil vegetation evidence from southern Peru supports the presence of seasonal periods of enhanced rainfall typical of El Niño conditions. The Miocene trend of increasing sea mammal diversity in the EPB parallels these steps, further supporting stepwise enhancement of primary productivity in the Humboldt Current during the Miocene.

Humboldt Current↗
USGS2025

Quaternary-active faults and the role of inherited structures in the Sacramento-San Joaquin Delta, western Central Valley, northern California

Seismic sources and their associated hazards within the Sacramento-San Joaquin Delta region of north-central California are relatively poorly characterized as compared to other, more heavily studied regions of northern California, such as the San Francisco Bay Area. Here we present a synthesis of subsurface, bedrock geology, and geodetic datasets from the Delta and from the Coast Ranges and Diablo Range to the northwest and southwest, respectively. We integrate these data and our own surface geologic and geomorphic observations to present a comprehensive review of faults in the Delta that exhibit Quaternary activity. Structural geologic data from the surrounding region highlight the significant influence that Late Cretaceous-to-Paleogene forearc structures exert on the geometry and kinematics of major Quaternary-active structures within the Delta. These inherited structures — including the Pittsburg-Kirby Hills Fault, Midland Fault, and Great Valley Fault System — exhibit a range of geometries and kinematics. Analysis of geomorphology along these structures suggests that these structures combine to accommodate Quaternary strain across the Delta region. A clearer understanding of subsurface geometries and structural relationships, built upon the regional tectonic history, provides insight into modern deformation accommodated on older structures and helps inform interpretations of seismic hazard within the Delta.

California↗
USGS2024

Collision structures of the Prince William terrane and Chugach terrane docking along the Shumagin and Unimak convergent margins, Alaska, USA

Western Alaska’s convergent margins are composed of tectonostratigraphic terranes. On land, terrane assembly is recognized along boundaries or sutures between neighboring geologic elements with distinctly different origins. In marine areas where rock outcrops are covered by sediment, recognizing terrane sutures is problematic. A fault in seismic dip line 5 of the ALEUT project has been interpreted as a terrane suture. It is imaged intermittently down to the 30+-km-deep plate interface. Processing of ALEUT strike line 7 revealed the suture at ~18 km depths extending 300 km along the margin. Upper structures in line 5 are like the structures of adjacent seismic transects where imaging is only 8−10 km deep. They were previously not recognized as the upper reaches of terrane sutures and show structural details obscured at greater depths. The composite data are the basis for a simple tectonic model of terrane docking.

Alaska↗