USGS Science⌕ Search

SEARCH · USGS Science

Results for “Southeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources
USGS1995

Water quality of storm runoff and comparison of procedures for estimating storm-runoff loads, volume, event-mean concentrations, and the mean load for a storm for selected properties and constituents for Colorado Springs, southeastern Colorado, 1992

The U.S. Environmental Protection Agency requires that municipalities that have a population of 100,000 or greater obtain National Pollutant Discharge Elimination System permits to characterize the quality of their storm runoff. In 1992, the U.S. Geological Survey, in cooperation with the Colorado Springs City Engineering Division, began a study to characterize the water quality of storm runoff and to evaluate procedures for the estimation of storm-runoff loads, volume and event-mean concentrations for selected properties and constituents. Precipitation, streamflow, and water-quality data were collected during 1992 at five sites in Colorado Springs. Thirty-five samples were collected, seven at each of the five sites. At each site, three samples were collected for permitting purposes; two of the samples were collected during rainfall runoff, and one sample was collected during snowmelt runoff. Four additional samples were collected at each site to obtain a large enough sample size to estimate storm-runoff loads, volume, and event-mean concentrations for selected properties and constituents using linear-regression procedures developed using data from the Nationwide Urban Runoff Program (NURP). Storm-water samples were analyzed for as many as 186 properties and constituents. The constituents measured include total-recoverable metals, vola-tile-organic compounds, acid-base/neutral organic compounds, and pesticides. Storm runoff sampled had large concentrations of chemical oxygen demand and 5-day biochemical oxygen demand. Chemical oxygen demand ranged from 100 to 830 milligrams per liter, and 5.-day biochemical oxygen demand ranged from 14 to 260 milligrams per liter. Total-organic carbon concentrations ranged from 18 to 240 milligrams per liter. The total-recoverable metals lead and zinc had the largest concentrations of the total-recoverable metals analyzed. Concentrations of lead ranged from 23 to 350 micrograms per liter, and concentrations of zinc ranged from 110 to 1,400 micrograms per liter. The data for 30 storms representing rainfall runoff from 5 drainage basins were used to develop single-storm local-regression models. The response variables, storm-runoff loads, volume, and event-mean concentrations were modeled using explanatory variables for climatic, physical, and land-use characteristics. The r2 for models that use ordinary least-squares regression ranged from 0.57 to 0.86 for storm-runoff loads and volume and from 0.25 to 0.63 for storm-runoff event-mean concentrations. Except for cadmium, standard errors of estimate ranged from 43 to 115 percent for storm- runoff loads and volume and from 35 to 66 percent for storm-runoff event-mean concentrations. Eleven of the 30 concentrations collected during rainfall runoff for total-recoverable cadmium were censored (less than) concentrations. Ordinary least-squares regression should not be used with censored data; however, censored data can be included with uncensored data using tobit regression. Standard errors of estimate for storm-runoff load and event-mean concentration for total-recoverable cadmium, computed using tobit regression, are 247 and 171 percent. Estimates from single-storm regional-regression models, developed from the Nationwide Urban Runoff Program data base, were compared with observed storm-runoff loads, volume, and event-mean concentrations determined from samples collected in the study area. Single-storm regional-regression models tended to overestimate storm-runoff loads, volume, and event-mean con-centrations. Therefore, single-storm local- and regional-regression models were combined using model-adjustment procedures to take advantage of the strengths of both models while minimizing the deficiencies of each model. Procedures were used to develop single-stormregression equations that were adjusted using local data and estimates from single-storm regional-regression equations. Single-storm regression models developed using model- adjustment proce

Colorado↗
USGS1979

Chemical analyses of coal from the Emery and Ferron Sandstone members of the Mancos Shale, Henry Mountains Field, Wayne and Garfield counties, Utah

As part of a continuing program by the U.S. Geological Survey to collect and chemically analyze representative samples of U.S. coals, 18 samples were collected from the Upper Cretaceous Emery and Ferron Sandstone Members of the Mancos Shale in the Henry Mountains coal field, Wayne and Garfield Counties, Utah (fig. 1). The 18 samples are briefly described in table 1. Thirteen of these samples were collected from seven holes that were drilled in connection with the Henry Mountains EMRIA (Energy Mineral Rehabilitation Inventory and Analyses) study (U.S. Department of the Interior, 1978). The locations of the seven core holes and the four other sampling sites are shown on figure 2. The Henry Mountains coal field is adjacent to the Henry Mountains of southeastern Utah. The basin is a long, narrow syncline about 110 km long and 24 km wide bounded on the west by the Waterpocket Fold and on the east by the Henry Mountains. The most comprehensive geologic report available on the area is by Hunt and others (1953). Their work included a considerable amount of information on the coal resources. Other work in the area concerning coal or stratigraphy of coal bearing units includes: Doelling (1972), Peterson and Ryder (1975), Doelling (1975), Law (1977; 1978; 1979 a,b), and U.S. Department of the Interior (1978). In the Henry Mountains field, there are three coal bearing units in rocks of Late Cretaceous age. In ascending order they are the Dakota Sandstone, the Ferron Sandstone Member of the Mancos Shale, and the Emery Sandstone Member of the Mancos Shale. The coal beds of the Henry Mountains coal field originated as layers of peat that were deposited, for the most part, in coastal swamp environments. Individual coal beds are discontinuous and exhibit large variations in thickness and quality. The thickest and most continuous coal beds occur in the Emery Sandstone Member along or near the axis of the Henry Mountains syncline (Law, 1978).

Utah↗
USGS2000

Geologic studies in Alaska by the U.S. Geological Survey, 1997

The eight papers that follow continue the series of U.S. Geological Survey (USGS) reports on investigations in the geologic sciences in Alaska. The series presents new and sometimes preliminary findings that are of interest to earth scientists in academia, government, and industry; to land and resource managers; and to the general public. Reports presented in Geologic Studies in Alaska cover a broad spectrum of topics from all parts of the State (fig. 1), which serves to emphasize the diversity of USGS efforts to meet the Nation's needs for earth-science information in Alaska. The papers in this volume are organized under the topics Resources, Geologic Framework, and Environment and Climate. Such an organization is intended to reflect the scope and objectives of USGS programs currently active in Alaska. Resource papers include one that presents detailed observations from a Mississippian Zn-Pb-Cu-Ag occurrence in the Brooks Range (Werdon). Mineralogic, chemical, and isotopic data provide the basis for a proposed relationship between this vein-breccia deposit and the shale-hosted massive sulfide deposit type, which includes the active Red Dog mine in the western Brooks Range. Also included under the topic of Resources is a paper that presents geochemical and isotopic data from the Greens Creek and Woewodski Island volcanogenic massive sulfide deposits in southeastern Alaska (Newberry and Brew). The depositional environment and sedimentological setting of Tertiary coal beds in the Matanuska and Susitna Valleys is the focus of a third paper under the topic of Resources (Flores and others). Geologic Framework studies provide background information that is the scientific basis for present and future studies of the environment, mineral and energy resources, paleoclimate, and hazards in Alaska. One paper presents the results of sedimentologic and paleontologic comparisons of lower Paleozoic, deep-water-facies rock units in central Alaska (Dumoulin and others). The authors show which of these units are likely to correlate with one another, suggest likely source regions, and provide a structural restoration of units that have been fragmented by large fault motions. A second framework paper provides a map, rock descriptions, and chemical compositions of volcanic rocks in a newly recognized, geologically young volcanic center in the Aleutian volcanic arc (Hildreth and others). A third paper presents an interesting summary of gravity changes that occurred in south-central Alaska during the great earthquake of 1964 and for the following 25 years (Barnes). Gravity changes correlate with land-elevation changes in some cases, but not in others, which means that different processes are responsible for the gravity changes.

Alaska↗
USGS1968

Geology of the Great Smoky Mountains National Park, Tennessee and North Carolina

The boundary between Tennessee and North Carolina is delimited for about 50 miles in midlength by the crests of the Great Smoky Mountains, which include some of the highest summits in the southeastern United States, and which culminate in Clingmans Dome (alt 6,642 ft). Ramifying spurs and foothills descend northwestward from the State line divide toward the Appalachian Valley in Tennessee, as well as southeastward toward the less regularly disposed mountains of the main part of the Blue Ridge in North Carolina. All the Great Smoky Mountains are heavily forested, the higher summits being covered by spruce and fir, and the lower slopes, by a great variety of hardwoods. Much of this forested mountain wilderness has been set aside for public benefit and enjoyment as Great Smoky Mountains National Park. For most visitors to Great Smoky Mountains National Park, prime attractions are its noble forests, its open coves set gemlike amongst them, the animals of the forests and coves, and the relics of the mountaineers who have made their homes there. Only now and then, when the visitor's trail through the forest must circuit a rough ledge of rock, can he realize that the forest and the soil on which it grows are a mere veneer—a thin cover over the ancient rocks of the mountains. In the Yosemite, the Grand Canyon, and most of our other national parks in the West, the situation is very different; there, the impact of the bedrock of the parks is overwhelming in relation to the plants and animals that live on the bedrock. The terrain of the Great Smoky Mountains, their soils, unconsolidated deposits, and details of slope sculpture tell a geologic story of the last few million years of earth history, a story dominated by the drastic fluctuations of the ice-age climate. Although the mountains themselves were not covered with glacial ice, the climate at this latitude approached glacial conditions, and the mountaintops were occasionally above tree line. Deposits of debris that resulted from the associated accelerated erosion of the hillsides during glacial intervals and the deeply weathered soils produced during the episodes of warm and humid interglacial climate are evident at many places. These climatic oscillations also controlled the flora and fauna. The complex process of adjustment of plants and animals to the prevailing climate is one of the factors that has produced their present great diversity. This latest phase of the geologic history is not further treated in this publication. Maps showing the younger deposits and interpretations based on them are included in the several recent U.S. Geological Survey Professional Papers referred to below. Our concern in this text and its accompanying map (pl. 1) is with the bedrock geology of the Great Smoky Mountains and their surroundings, and with the story of far earlier times in earth history—when there were no Great Smoky Mountains, and when the geography and the landscape were very different from those today. Because of the forest cover and the scantiness of rock outcrops, the bedrock geology of the Great Smoky Mountains is not easy to decipher, and this difficulty is compounded by the enigmatic nature of most of the rocks themselves. It thus has come about that knowledge of the geology of the mountains has lagged behind that in surrounding regions. Following pioneer investigations of Safford (1869) and of Keith (1895, 1896), little further geologic study of the mountains was made until after World War II. The present text and map summarize the results of the more recent investigations, details of which are given at much greater length in a set of U.S. Geological Survey Professional Papers (Hamilton, 1961; Hadley and Goldsmith, 1963; King, 1964; Neuman and Nelson, 1965).

North Carolina, Tennessee↗
USGS2017

Development of simulated groundwater-contributing areas to selected streams, ponds, coastal water bodies, and production wells in the Plymouth-Carver region and Cape Cod, Massachusetts

Introduction The U.S. Geological Survey (USGS), in support of the Massachusetts Estuaries Project (MEP), delineated groundwater-contributing areas to various hydrologic receptors including ponds, streams, and coastal water bodies throughout southeastern Massachusetts, including portions of the Plymouth-Carver aquifer system and all of Cape Cod. These contributing areas were delineated over a 6-year period from 2003 through 2008 by using previously published regional USGS groundwater-flow models for the Plymouth-Carver region (Masterson and others, 2009), the Sagamore (western) and Monomoy (eastern) flow lenses of Cape Cod (Walter and Whealan, 2005), and lower Cape Cod (Masterson, 2004). The original USGS groundwater-contributing areas were subsequently revised in some locations by the MEP to remove modeling artifacts or to make the contributing areas more consistent with site-specific hydrologic conditions without further USGS review. This report describes the process used to create the USGS groundwater-contributing areas and provides these model results in their original format in a single, publicly accessible publication.

Massachusetts↗
USGS1972

Stream depletion factors, Arkansas River valley, southeastern Colorado; A basis for evaluating plans for conjunctive use of ground and surface water

The Arkansas River valley is a stream-aquifer system that consists of the Arkansas River and the associated valley-fill deposits. The hydrology, geology, and water-resources development in the valley have been described by Moore and Wood (1967). The history of delivery of irrigation water by canals indicates that the supply has been inadequate during some seasons and some years. The shortage can be reduced by carefully designed conjunctive use of ground and surface water. An analog model of the Arkansas River valley in Colorado was constructed to facilitate such designs (Moore and Wood, 1967).

Colorado↗
USGS2006

Water Quality, Hydrology, and Response to Changes in Phosphorus Loading of Nagawicka Lake, a Calcareous Lake in Waukesha County, Wisconsin

Nagawicka Lake is a 986-acre, usually mesotrophic, calcareous lake in southeastern Wisconsin. Because of concern over potential water-quality degradation of the lake associated with further development in its watershed, a study was conducted by the U.S. Geological Survey from 2002 to 2006 to describe the water quality and hydrology of the lake; quantify sources of phosphorus, including those associated with urban development; and determine the effects of past and future changes in phosphorus loading on the water quality of the lake. All major water and phosphorus sources were measured directly, and minor sources were estimated to construct detailed water and phosphorus budgets for the lake. The Bark River, near-lake surface inflow, precipitation, and ground water contributed 74, 8, 12, and 6 percent of the inflow, respectively. Water leaves the lake primarily through the Bark River outlet (88 percent) or by evaporation (11 percent). The water quality of Nagawicka Lake has improved dramatically since 1980 as a result of decreasing the historical loading of phosphorus to the lake. Total input of phosphorus to the lake was about 3,000 pounds in monitoring year (MY) 2003 and 6,700 pounds in MY 2004. The largest source of phosphorus entering the lake was the Bark River, which delivered about 56 percent of the total phosphorus input, compared with about 74 percent of the total water input. The next largest contributions were from the urbanized near-lake drainage area, which disproportionately accounted for 37 percent of the total phosphorus input but only about 5 percent of the total water input. Simulations with water-quality models within the Wisconsin Lakes Modeling Suite (WiLMS) indicated the response of Nagawicka Lake to 10 phosphorus-loading scenarios. These scenarios included historical (1970s) and current (base) years (MY 2003-04) for which lake water quality and loading were known, six scenarios with percentage increases or decreases in phosphorus loading from controllable sources relative to the base years 2003-04, and two scenarios corresponding to specific management actions. Because of the lake's calcareous character, the average simulated summer concentration of total phosphorus for Nagawicka Lake was about 2 times that measured in the lake. The models likely over-predict because they do not account for coprecipitation of phosphorus and dissolved organic matter with calcite, negligible release of phosphorus from the deep sediments, and external phosphorus loading with abnormally high amounts of nonavailable phosphorus. After adjusting the simulated results for the overestimation of the models, a 50-percent reduction in phosphorus loading resulted in an average predicted phosphorus concentration of 0.008 milligrams per liter (mg/L) (a decrease of 46 percent). With a 50-percent increase in phosphorus loading, the average predicted concentration was 0.020 mg/L (an increase of 45 percent). With the changes in land use under the assumed future full development conditions, the average summer total phosphorus concentration should remain similar to that measured in MY 2003-04 (approximately 0.014 mg/L). However, if stormwater and nonpoint controls are added to achieve a 50-percent reduction in loading from the urbanized near-lake drainage area, the average summer total phosphorus concentration should decrease from the present conditions (MY 2003-04) to 0.011 mg/L. Slightly more than a 25-percent reduction in phosphorus loading from that measured in MY 2003-04 would be required for the lake to be classified as oligotrophic.

Scientific Investigations Report↗
USGS2007

Water-Quality Characteristics for Sites in the Tongue, Powder, Cheyenne, and Belle Fourche River Drainage Basins, Wyoming and Montana, Water Years 2001-05, with Temporal Patterns of Selected Long-Term Water-Quality Data

Water-quality sampling was conducted regularly at stream sites within or near the Powder River structural basin in northeastern Wyoming and southeastern Montana during water years 2001-05 (October 1, 2000, to September 30, 2005) to characterize water quality in an area of coalbed natural gas development. The U.S. Geological Survey, in cooperation with the Wyoming Department of Environmental Quality, characterized the water quality at 22 sampling sites in the Tongue, Powder, Cheyenne, and Belle Fourche River drainage basins. Data for general hydrology, field measurements, major-ion chemistry, and selected trace elements were summarized, and specific conductance and sodium-adsorption ratios were evaluated for relations with streamflow and seasonal variability. Trend analysis for water years 1991-2005 was conducted for selected sites and constituents to assess change through time. Average annual runoff was highly variable among the stream sites. Generally, streams that have headwaters in the Bighorn Mountains had more runoff as a result of higher average annual precipitation than streams that have headwaters in the plains. The Powder River at Moorhead, Mont., had the largest average annual runoff (319,000 acre-feet) of all the sites; however, streams in the Tongue River drainage basin had the highest runoff per unit area of the four major drainage basins. Annual runoff in all major drainage basins was less than average during 2001-05 because of drought conditions. Consequently, water-quality samples collected during the study period may not represent long-term water-quality con-ditions for all sites. Water-quality characteristics were highly variable generally because of streamflow variability, geologic controls, and potential land-use effects. The range of median specific-conductance values among sites was smallest in the Tongue River drainage basin. Median values in that basin ranged from 643 microsiemens per centimeter at 25 degrees Celsius (?S/cm at 25?C) on the Tongue River to 1,460 ?S/cm at 25?C on Prairie Dog Creek. The Tongue River drainage basin has the largest percentage of area underlain by Mesozoic-age and older rocks and by more resistant rocks. In addition, the higher annual precipitation and a steeper gradient in this basin compared to basins in the plains produce relatively fast stream velocities, which result in a short contact time between stream waters and basin materials. The Powder River drainage basin, which has the largest drainage area and most diverse site conditions, had the largest range of median specific-conductance values among the four major drainage basins. Median values in that basin ranged from 680 ?S/cm at 25?C on Clear Creek to 5,950 ?S/cm at 25?C on Salt Creek. Median specific-conductance values among sites in the Cheyenne River drainage basin ranged from 1,850 ?S/cm at 25?C on Black Thunder Creek to 4,680 ?S/cm at 25?C on the Cheyenne River. The entire Cheyenne River drainage basin is in the plains, which have low precipitation, soluble geologic materials, and relatively low gradients that produce slow stream velocities and long contact times. Median specific-conductance values among sites in the Belle Fourche River drainage basin ranged from 1,740 ?S/cm at 25?C on Caballo Creek to 2,800 ?S/cm at 25?C on Donkey Creek. Water in the study area ranged from a magnesium-calcium-bicarbonate type for some sites in the Tongue River drainage basin to a sodium-sulfate type at many sites in the Powder, Cheyenne, and Belle Fourche River drainage basins. Little Goose Creek, Goose Creek, and the Tongue River in the Tongue River drainage basin, and Clear Creek in the Powder River drainage basin, which have headwaters in the Bighorn Mountains, consistently had the smallest median dissolved-sodium concentrations, sodium-adsorption ratios, dissolved-sulfate concentrations, and dissolved-solids concentrations. Salt Creek, Wild Horse Creek, Little Powder River, and the Cheyenne River, which have headwat

Scientific Investigations Report↗
USGS2019

Windows to the deep 2018: Exploration of the southeast US Continental margin

Windows to the Deep 2018: Exploration of the Southeast US Continental Margin was a 36-day expedition aboard NOAA Ship Okeanos Explorer to acquire data on priority exploration areas identified by the ocean management and scientific communities. This expedition involved high-resolution multibeam sonar mapping and ROV dives, ranging from 340 m to 3,400 m depth, across the southeast US continental margin. Operations primarily targeted areas with potential to host deep-sea coral and sponge communities, including mounds, ridges, and terraced features on the continental slope. Dive sites also included maritime heritage sites, a submarine landslide feature, and several submarine canyon slopes, some of which exhibited evidence of active cold seeps. High biological abundance was noted at six of 17 dive sites, three of which also had high biological diversity. Additionally, deep-sea corals or sponges were observed on every dive except one, which was dedicated to gas seep exploration.

Atlantic Ocean, Blake Plateau, Stetson Mesa↗
USGS1989

Preliminary geologic map of the Al Jawf Quadrangle, sheet 29D, Kingdom of Saudi Arabia

The Al Jawf quadrangle (Sheet 29 D) lies in the northwestern part of the Kingdom of Saudi Arabia about 900 km north of Jeddah. The quadrangle is located between lat 29°00'-30°00' N. and long 39°00'-40°30' E. It includes the southeastern rim of the Sirhan-Turayf basin, and is underlain by sedimentary rocks of Paleozoic to Cenozoic age. More than half of the quadrangle is covered by surficial deposits. The Phanerozoic sedimentary rocks of the map area were deposited under both marine and continental conditions. Marine deposits, produced by transgressions and regressions of the sea, are of outershelf to near-shore and coastal-lagoon origin, and the continental deposits are largely of fluvial and deltaic origin. Part of the Miocene-Pliocene rocks are believed to have been deposited in a lacustrine environment. Tensional structures, such as linear macro joints, grabens, block-faulting, and some folding are characteristic of the geology of the map area, and reflect a combination of Red Sea rifting and movement of the Hail Arch. This report introduces a new structural concept that extends the Wadi as Sirhan graben complex southeastward in the Al Jawf quadrangle into the An Nafud (Great Desert). This concept greatly increases the area of interest in the potentially oil-and-gas-bearing rocks of the Wadi as Sirhan region to include those of the An Nafud basin. Discovery of the largest specimen of Prototaxites sp. in the world, in the Al Jubah area of the northeastern part of the quadrangle, has helped solve a long-standing stratigraphic problem involving Devonian and Cretaceous rocks of the southeastern part of the Sirhan-Turayf basin. Phosphorite, a commodity of major economic interest in the Sirhan-Turayf basin, is exposed in the map area along escarpments that form the southeastern rim of the basin. The grade of the phosphorite is as much as 21 percent P 2 O 5 , but the beds are thin and lenticular.

Open-File Report↗
USGS2008

Debris flows and floods in southeastern Arizona from extreme precipitation in July 2006 — Magnitude, frequency, and sediment delivery

From July 31 to August 1, 2006, an unusual set of atmospheric conditions aligned to produce record floods and an unprecedented number of slope failures and debris flows in southeastern Arizona. During the week leading up to the event, an upper-level low-pressure system centered over New Mexico generated widespread and locally heavy rainfall in southeastern Arizona, culminating in a series of strong, mesoscale convective systems that affected the region in the early morning hours of July 31 and August 1. Rainfall from July 27 through 30 provided sufficient antecedent moisture that the storms of July 31 through August 1 resulted in record streamflow flooding in northeastern Pima County and eastern Pinal County. The rainfall caused at least 623 slope failures in four mountain ranges, including more than 30 near Bowie Mountain in the northern Chiracahua Mountains, and 113 at the southern end of the Huachuca Mountains within and adjacent to Coronado National Memorial. In the Santa Catalina Mountains north of Tucson, 435 slope failures spawned debris flows on July 31 that, together with flood runoff, damaged structures and roads, affecting infrastructure within Tucson’s urban boundary. Heavy, localized rainfall in the Galiuro Mountains on August 1, 2006, resulted in at least 45 slope failures and an unknown number of debris flows in Aravaipa Canyon. In the southern Santa Catalina Mountains, the maximum 3-day precipitation measured at a climate station for July 29-31 was 12.04 in., which has a 1,200-year recurrence interval. Other rainfall totals from late July to August 1 in southeastern Arizona also exceeded 1,000-year recurrence intervals. The storms produced floods of record along six watercourses, and these floods had recurrence intervals of 100-500 years. Repeat photography suggests that the spate of slope failures was historically unprecedented, and geologic mapping and cosmogenic dating of ancient debris-flow deposits indicate that debris flows reaching alluvial fans in the Tucson basin are extremely rare events. Although recent watershed changes—particularly the impacts of recent wildland fires—may be important locally, the record number of slope failures and debris flows were related predominantly to extreme precipitation, not other factors such as fire history. The large number of slope failures and debris flows in an area with few such occurrences historically underscores the rarity of this type of meteorological event in southeastern Arizona. Most slope failures appeared to be shallow-seated slope failures of colluvium on steep slopes that caused deep scour of chutes and substantial aggradation of channels downstream. In the southern Santa Catalina Mountains, we estimate that 1.5 million tons of sediment were released from slope failures into the channels of ten drainage basins. Thirty-six percent of this sediment (527,000 tons) is gravel-sized or smaller and is likely to be transported by streamflow out of the mountain drainages and into the drainage network of metropolitan Tucson. This sediment poses a potential flood hazard by reducing conveyance in fixed-section flood control structures along Rillito Creek and its major tributaries, although our estimates suggest that deposition may be small if it is distributed widely along the channel, which is expected. Using the stochastic debris-flow model LAHARZ, we simulated debris-flow transport from slope failures to the apices of alluvial fans flanking the southern Santa Catalina Mountains. Despite considerable uncertainty in applying coefficients developed from worldwide observations to conditions in the southern Santa Catalina Mountains, we predicted the approximate area of depositional zones for several 2006 debris flows, particularly for Soldier Canyon. Better results could be achieved in some canyons if sediment budgets could be developed to account for alternating transport and deposition zones in channels with abrupt expansions and contractions, such as Rattlesnake Canyon.

Arizona↗
USGS2000

Chinese tallow: Invading the southeastern Coastal Plain

Chinese tallow is an ornamental tree with colorful autumn foliage that can survive full sunlight and shade, flooding, drought, and in some cases fire. To horticulturists this kind of tree sounds like a dream, but to ecologists, land managers, and land owners this kind of tree can be a nightmare, especially when it invades an area and takes over native vegetation. Chinese tallow ( Triadica sebifera ), a nonnative tree from China, is currently transforming the southeastern Coastal Plain. Over the last 30 years, Chinese tallow has become a common tree in old fields and bottomland swamps of coastal Louisiana. Several studies at the U.S. Geological Survey's National Wetlands Research Center (NWRC), Lafayette, Louisiana, are aimed at understanding the factors that contribute to Chinese tallow growth, spread, and management. When tallow invades, it eventually monopolizes an area, creating a forest without native animal or plant species. This tree exhibits classic traits of most nonnative invaders: it is attractive so people want to distribute it, it has incredible resiliency, it grows quickly and in a variety of soils, and it is resistant to pests. In the coastal prairie of Louisiana and Texas, Chinese tallow can grow up to 30 feet and shade out native sun-loving prairie species. The disappearing of prairie species is troublesome because less than 1% of original coastal prairie remains, and in Louisiana, less than 500 of the original 2.2 million acres still exist. Tallow reproduces and grows quickly and can cause large-scale ecosystem modification (fig. 1). For example, when it completely replaces native vegetation, it has a negative effect on birds by degrading the habitat. Besides shading out grasses that cattle like to eat, it can also be potentially harmful to humans and animals because of its berries (fig. 2) and plant sap that contain toxins. There is some concern its leaves may shed toxins that change the soil chemistry and make it difficult for other plants to grow.

Fact Sheet↗
USGS1981

Maps showing mineral resource potential of the Virgin Mountains Instant Study Area, Clark County, Nevada

The Virgin Mountains Instant Study Area contains about 30,000 acres (12,000 ha) in southeastern Nevada. In accordance with the Federal Land Policy and Management Act (P.L. 94-579), the U.S. Bureau of Mines examined mines, prospects, and mineralized zones, and the U.S. Geological Survey made regional geologic, geophysical, and geochemical investigations. Tungsten and sheet mica have been produced from the study area, and oil and gas lease applications have been filed on 20,300 acres (8,200 ha). Sixteen mining claims are presently held.

Nevada↗
USGS2015

Historic and forecasted population and land-cover change in eastern North Carolina, 1992-2030

The Southeast Regional Partnership for Planning and Sustainability (SERPPAS) was formed in 2005 as a partnership between the Department of Defense (DOD) and State and Federal agencies to promote better collaboration in making resource-use decisions. In support of this goal, the U.S. Geological Survey (USGS) conducted a study to evaluate historic population growth and land-cover change, and to model future change, for the 13-county SERPPAS study area in southeastern North Carolina (fig. 1). Improved understanding of trends in land-cover change and the ability to forecast land-cover change that is consistent with these trends will be a key component of efforts to accommodate local military-mission imperatives while also promoting sustainable economic growth throughout the 13-county study area. The study had three principal objectives: 1. Evaluate historic changes in population and land cover for the period 1992–2006 using both previously existing as well as newly generated land-cover data. 2. Develop models to forecast future change in land cover using the data gathered in objective 1 in conjunction with ancillary data on the suitability of the various sub-areas within the study area for low- and high-intensity urban development. 3. Deliver these results—including an executive-level briefing and a USGS technical report—to DOD, other project cooperators, and local counties in hard-copy and digital formats and via the Web through a map-based data viewer. This report provides a general overview of the study and is intended for general distribution to non-technical audiences.

North Carolina↗
USGS1952

Preliminary report on ground water in the Michaud Flats Project, Power County, Idaho

The Michaud Flats Project area, as here described, includes about 65 square miles in central Power County, south of the Snake River in the southeastern Snake River Plain of Idaho. The principal town and commercial center of the area is American Falls. The immediate purpose of work in the area by the U.S. Geological Survey was to investigate the possibility of developing substantial quantities of ground water for irrigating high and outlying lands in the proposed Michaud Flats Project area of the U.S. Bureau of Reclamation. Initial findings are sufficiently favorable to warrant comprehensive further investigation. Advanced study would assist proper utilization of ground-water resources and would aid ultimate evaluation of total water resources available in the area. About 10,000 acres of low-lying lands in the Michaud Flats project could be irrigated with water from the Snake River under a low-line distribution system involving a maximum pumping lift of about 200 feet above the river. An additional larger area of high and outlying lands is suitable for irrigation with water pumped from wells. If sufficient ground water is economically available, the expense of constructing and operating a costly highline distribution system for surface water could be saved. Reconnaissance of the ground-water geology of the area disclosed surface outcrops of late Cenozoic sedimentary, pyroclastic, and volcanic rocks. Well logs and test borings show that similar materials are present beneath the land surface in the zone of saturation. Ground water occurs under perched, unconfined, and confined (artesian) conditions, but the aquifers have not been adequately explored. Existing irrigation wells, 300 feet or less in depth, yield several hundred to 1,400 gallons of water a minute, with pumping drawdowns of 6 to 50 feet, and perhaps more. A few wells have been pumped out at rates of less than 800 gallons a minute. Scientific well-construction and development methods would lead to more efficient well performance. A generalized water-table contour map of the area shows that the principal general direction of ground-water movement is toward the west and northwest. The southwestern part of the American Falls Reservoir, and a segment of the Snake River below the dam, may be perched above the water table. Ground water appears to move beneath this segment of the river to the Snake River Plain on the northwest side. So far as is known, recharge to the ground-water reservoir is chiefly from local sources and from the runoff from the mountain area southeast of the project. Seepage losses from surface water spread for irrigation would contribute a substantial amount of new recharge to the ground water, but the amount of such recharge might be less than the depletion of ground water by pumping. Therefore, with ground-water irrigation a part of the project, return flow to the American Falls Reservoir might be less than it is in the existing regimen. Ground-water pumping where the ground water is not tributary to the reservoir might not deplete the reservoir appreciably, but would reduce the net supply of water available west of Neeley. Evidence indicates that at least moderate supplies of ground water can be obtained in low-lying areas southwest and northeast of American Falls, but the safe perennial yields of the aquifers cannot now be estimated. The ground-water potential in high and outlying lands is not known. It is unlikely that this potential is sufficient to supply all high and outlying lands, but the supply may be adequate for a substantial part of these lands. Thorough investigation appears to be warranted.

Open-File Report↗
USGS2026

Southeastern Utah Federal lands science needs survey

Evidence-based scientific information can help support defensible decision making in the management of public lands. This report sought to identify current (2024–25) Federal agency research needs in southeastern Utah and to synthesize common management challenges and questions across jurisdictional boundaries. We implemented a science needs assessment focused on lands managed by the Bureau of Land Management (BLM), U.S. Department of Agriculture Forest Service (FS), and National Park Service (NPS) in southeastern Utah—the area delineated by BLM’s Canyon Country District Office, portions of the FS Manti-La Sal National Forest, and Southeast Utah Group NPS units. U.S. Geological Survey (USGS) researchers met with and surveyed BLM, NPS, and FS staff in 2024 and 2025 to understand their science needs and preferred modes of information delivery. The USGS’s approach may be unrepresentative in terms of which topic areas were addressed, but the responses nevertheless highlight challenges and high-priority research areas that could contribute positively to agency decision making. Common management challenges and areas where additional research could be beneficial to land managers include the effects of climate change, recreation effects and visitor behavior, hydrology and hydrologic changes due to anthropogenic pressures, and the capacity for inventory and monitoring across essentially all resource types. Research on site-specific restoration techniques and their outcomes was also a common theme. In this report we discuss ways in which researchers can increase the extent to which their work could be actionable for resource managers and provide suggestions for potential priority research areas for the study region.

Utah↗
USGS1986

Mines and prospects of the Butte 1° x 2° Quadrangle, Montana

The Butte quadrangle, in the Northern Rocky Mountains of southwestern Montana, has had a long, productive, and colorful mining history. Butte, the city from which the quadrangle takes its name, is located in the most famous mining district of the quadrangle. This district, the Butte or Summit Valley district, has been described as the "richest hill on earth" and is one of the richest and most productive mining districts of the world. The quantity of metals produced from this district alone are far greater than the combined total of all commodities from all other mining districts of the quadrangle. However, many districts other than Butte have had significant production as compared to other mining districts of the Northern Rocky Mountains. The dollar value of production from the Butte district is more than $6 billion (Miller, 1973) and that of the combined total of production from the other districts in the quadrangle is more than $400 million. These values are based on actual metal prices at the time of production. The totals would be many times larger if converted to present day commodity prices. Mineral occurrence data for a total of 1111 mines, prospects, and mineral occurrences have been compiled for the Butte quadrangle. These mineralized sites are found throughout the quadrangle but most are concentrated in the major mining districts; 78 percent are clustered in 46 established mining districts and the remaining 22 percent are more widely scattered in 24 geographic areas (fig. 1). Only small areas of the quadrangle lack significant mines, prospects, or mineral occurrences. The locations of mines and prospects are shown on maps (pl. 1 and 2) and a brief description of each site is given in a table arranged by mining district or geographic area (table 1) (all tables are at end of report). This table gives a brief description of each district or area and details of each site within the district or area including site number, name and alternate name(s), location by latitude and longitude, commodities present, description of the site, and sources of data. Data for this report come from the U.S. Geological Survey Mineral Resource Data System (MRDS; this was formerly known as the Computerized Resource Information Bank (CRIB)), from many published and unpublished sources, and from geologic field work. The Butte quadrangle is in southwestern Montana and is bounded by latitudes 46° and 47° N. and longitudes 112° and 114° W. The city of Butte is near the southern edge and in the southeastern corner of the quadrangle. Helena, the state capital of Montana, is located on the eastern edge and Missoula is located near the northwestern corner of the quadrangle. Most of the area of the quadrangle is in Granite, Powell, Lewis and Clark, and Jefferson Counties and the remaining area includes parts of Missoula, Ravalli, Deer Lodge, and Silver Bow Counties. The quadrangle includes a number of major and minor mountain ranges separated by intermontane valleys. The continental divide trends nearly north-south through the eastern part of the quadrangle to a point near Butte, then trends generally east-west near the southern boundary of the quadrangle, west of Butte. East of the divide the drainages are tributary to the Missouri River and west of the divide the drainages are tributary to the Clark Fork, which heads in the vicinity of Butte. The geology of the Butte quadrangle is very complex. Sedimentary and igneous rocks range in age from Proterozoic to Tertiary. Most of the pre-Tertiary sedimentary rocks are structurally complex due to widespread faulting and folding. Due to thrust faulting, complete sequences of these sedimentary units are not generally present in the quadrangle and the thicknesses and lithologies are variable from one thrust plate to another. The oldest rocks in the quadrangle are sedimentary rocks of the Belt Supergroup of Middle Proterozoic age. They form very thick sequences, are exposed over a large percentage of the area of the quadrangle, and include formations of the lower, middle, and upper parts of the Belt. Individual formations are as much as 13,000 ft thick (C. A. Wallace, unpub. data) and the maximum thickness of the Belt Supergroup in the quadrangle may be similar to that of the entire sequence near Alberton, Montana, to the northwest of the Butte quadrangle where it exceeds 67,000 ft (Harrison, 1972). In many areas of the quadrangle these Precambrian rocks are overlain by thin to moderately thick sequences of Cambrian to Permian sedimentary rocks. The maximum thickness of the Paleozoic section is about 8,000 ft (C. A. Wallace, unpub. data). A relatively thick sequence of Mesozoic sedimentary rocks, predominantly Cretaceous in age, which is found mostly in the central part of the quadrangle, overlies the Paleozoic rocks. If complete, the Mesozoic sequence would total about 28,000 ft (C. A. Wallace, unpub. data). The Butte quadrangle is located in a structurally complex region. Most of the Butte quadrangle is in the southern part of the Montana Disturbed Belt, a tectonic belt in the Northern Rocky Mountains characterized by northwest-trending faults and intense deformation. An element of the Disturbed Belt, called the Sapphire Thrust System occupies most of the western two-thirds of the quadrangle. Sedimentary rocks of Cretaceous and older ages in the Sapphire Thrust System have been complexly folded and faulted. Plutonic rocks, which intrude the sedimentary units, and volcanic rocks of Cretaceous and Tertiary ages are widespread in the quadrangle. Most of these are post-thrusting but some may be pre- or syn-tectonic and involved in the thrusting and folding. Most of the mineral wealth in the quadrangle, in the form of hydrothermal ore deposits, is genetically related to Cretaceous granitic plutonism. Igneous activity decreased but continued into Tertiary time, at least until the Oligocene. In the Butte quadrangle the Cenozoic Era was important for normal faulting, volcanism, sedimentation, glaciation, and the formation of many important mineral deposits. Many normal faults were especially active during the Miocene and Pliocene and some were active into the Quaternary. Volcanic rocks of Eocene and Oligocene age cover large areas and are genetically related to several important mining districts. During Cenozoic time, thick accumulations of Tertiary basin-fill sediments, Pleistocene glacial till and outwash, and Holocene alluvium and colluvium were deposited. The Cenozoic was important for the formation of placer deposits valuable mainly for gold but some have produced important quantities of sapphires and tungsten. This map is part of a folio of maps of the Butte 1° x 2°quadrangle, Montana, prepared under the Conterminous United States Mineral Assessment Program (CUSMAP). Other maps to be published as part of this folio are a geologic map, geochemical maps, geophysical maps, maps of linear features and limonitic alteration interpreted from satellite and airborne radar data, and mineral resource assessment maps.

Montana↗
USGS2000

Geologic map database of the El Mirage Lake area, San Bernardino and Los Angeles Counties, California

This geologic map database for the El Mirage Lake area describes geologic materials for the dry lake, parts of the adjacent Shadow Mountains and Adobe Mountain, and much of the piedmont extending south from the lake upward toward the San Gabriel Mountains. This area lies within the western Mojave Desert of San Bernardino and Los Angeles Counties, southeastern California. The area is traversed by a few paved highways that service the community of El Mirage, and by numerous dirt roads that lead to outlying properties. An off-highway vehicle area established by the Bureau of Land Management encompasses the dry lake and much of the land north and east of the lake. The physiography of the area consists of the dry lake, flanking mud and sand flats and alluvial piedmonts, and a few sharp craggy mountains. This digital geologic map database, intended for use at 1:24,000-scale, describes and portrays the rock units and surficial deposits of the El Mirage Lake area. The map database was prepared to aid in a water-resource assessment of the area by providing surface geologic information with which deepergroundwater-bearing units may be understood. The area mapped covers the Shadow Mountains SE and parts of the Shadow Mountains, Adobe Mountain, and El Mirage 7.5-minute quadrangles. The map includes detailed geology of surface and bedrock deposits, which represent a significant update from previous bedrock geologic maps by Dibblee (1960) and Troxel and Gunderson (1970), and the surficial geologic map of Ponti and Burke (1980); it incorporates a fringe of the detailed bedrock mapping in the Shadow Mountains by Martin (1992). The map data were assembled as a digital database using ARC/INFO to enable wider applications than traditional paper-product geologic maps and to provide for efficient meshing with other digital data bases prepared by the U.S. Geological Survey's Southern California Areal Mapping Project.

California↗