SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

USGS1983

Petroleum and mineral resources of Antarctica

No known petroleum or mineral resources occur in Antarctica. The data on these subjects have been collected, mainly since the IGY (International Geophysical Year), 1957-58, as a part of other research carried out by geologists and geophysicists from a number of countries. Specific resource-related studies have not been made. Wright and Williams (1974) summarized what was known of Antarctic mineral resources a decade ago. The U.S. Geological Survey has been actively pursuing various investigations in Antarctica since 194 7. In the course of this work and that of our colleagues elsewhere in the United States and in other countries, much information relevant to petroleum and mineral resources has been obtained. Since 1976, modern state-of-the-art multichannel seismic reflection and aeromagnetic surveys by several countries over the continental margin of Antarctica have indicated thick sedimentary basins. However, no offshore drilling beneath the continental shelf has taken place since the DSDP (Deep Sea Drilling Project) holes in the Ross Sea in 1973. Geologic field investigations begun at the turn of the twentieth century have been intensified in the past two decades; most rock outcrops have been visited and samples collected. Technology to exploit resources, particularly in the Arctic, has been developing at a rapid rate, and much of it could be applied to Antarctica. As a result of the petroleum price increases of the past decade, the attention of a number of countries has turned to Antarctica, but under the policy of "voluntary restraint" adopted by the Antarctic Treaty nations, no active petroleum or mineral exploration is taking place. The Antarctic treaty countries are in the process of negotiating an Antarctic mineral resources regime that is anticipated to be completed within the next several years. Therefore it seemed timely to us to readdress the question of petroleum and mineral resources. These reports review and summarize the available information. The first report summarizes the information relevant to petroleum resources. Although uneconomic at present, petroleum is generally considered more likely to be exploited (if supergiant fields were ever found) in the next few decades than hard minerals. The second report reviews the reported occurrences of minerals in Antarctica and discusses their significance. The final report discusses the Dufek layered mafic intrusion, second only to the Bushveld Complex in size in the world; the Dufek intrusion might be considered as a potential target for mineral exploration.

Circular↗

USGS2019

3D geologic framework for use with the U.S. Geological Survey National Crustal Model, Phase 1—Western United States

A 3D geologic framework is presented here as part of the U.S. Geological Survey National Crustal Model for the western United States, which will be used to improve seismic hazard assessment. The framework is based on 1:250,000 to 1:1,000,000-scale state geologic maps and depths of multiple subsurface unit boundaries. The geology at or near the Earth’s surface is based on published maps with modifications to remove discontinuities across state borders. Extrapolation of rock type and age in the subsurface is achieved by iterative stripping of units of a given age, nearest neighbor interpolation of the remaining units, and constraints on basement geology. The subsurface depth of the interfaces between units is determined by a range of models with varying quantity and quality of constraints. Bedrock depth is derived primarily from a proxy model with added geophysical constraint in some areas. The depths to the base of Cenozoic and Phanerozoic sedimentary and extrusive volcanic rocks are constrained by geophysical methods in many areas. Elsewhere, a simple method is used to estimate their subsurface depth based on the distance to the edge of the geologic units. The remaining continental units are evenly distributed above, below, and between depending on age. The oceanic crust is treated as a simple four-layer model with the added complexity of subduction beneath the North American plate along the Cascadia subduction zone. Refinements to this technique may be accomplished in future versions of the model with more specific information including the location of faults to produce discontinuities in geologic structure and additional information obtained from boreholes and geophysical studies. Further improvements to the geologic framework may be made by incorporating information from more local studies, for example, hydrogeologic studies.

Open-File Report↗

USGS1954

Exploration for uranium deposits in the Atkinson Mesa area, Montrose County, Colorado

The U.S. Geological Survey explored the Atkinson Mesa area for uranium- and vanadium-bearing deposits from July 2, 1951, to June 18, 1953, with 397 diamond-drill holes that totaled 261,251 feet. Sedimentary rocks of Mesozoic age are exposed in the Atkinson Mesa area. They are: the Brushy Basin member of the Upper Jurassic Morrison formation, the Lower Cretaceous Burro Canyon formation, and the Upper and Lower Cretaceous Dakota sandstone. All of the large uranium-vanadium deposits discovered by Geological Survey drilling are in a series of sandstone lenses in the upper part of the Salt Wash member of the Jurassic Morrison formation. The deposits are mainly tabular and blanket-like, but some elongate pod-shaped masses, locally called "rolls" may be present. The mineralized material consists of sandstone impregnated with a uranium mineral which is probably coffinite, spme carnotite, and vanadium minerals, thought to be mainly corvusite and montroseite. In addition,, some mudstone and carbonaceous material is similarly impregnated. Near masses of mineralized material the sandstone is light gray or light brown, is generally over 40 feet thick, and usually contains some carbonaceous material and abundant disseminated pyrite or limonite stain. Similarly, the mudstone in contact with the ore-bearing sandstone near bodies of mineralized rock is commonly blue gray, as compared to its dominant red color away from ore deposits. Presence and degree of these features are useful guides in exploring for new deposits.

Colorado↗

USGS1996

Thermal evolution of sedimentary basins in Alaska

The complex tectonic collage of Alaska is reflected in the conjunction of rocks of widely varying thermal maturity. Indicators of the level of thermal maturity of rocks exposed at the surface, such as vitrinite reflectance and conodont color alteration index, can help constrain the tectonic evolution of such complex regions and, when combined with petrographic, modern heat flow, thermogeochronologic, and isotopic data, allow for the detailed evaluation of a region?s burial and uplift history. We have collected and assembled nearly 10,000 vitrinite-reflectance and conodont-color-alteration index values from the literature, previous U.S. Geological Survey investigations, and our own studies in Alaska. This database allows for the first synthesis of thermal maturity on a broadly regional scale. Post-accretionary sedimentary basins in Alaska show wide variability in terms of thermal maturity. The Tertiary interior basins, as well as some of the forearc and backarc basins associated with the Aleutian Arc, are presently at their greatest depth of burial, with immature rocks exposed at the surface. Other basins, such as some backarc basins on the Alaska Peninsula, show higher thermal maturities, indicating modest uplift, perhaps in conjunction with higher geothermal gradients related to the arc itself. Cretaceous ?flysch? basins, such as the Yukon-Koyukuk basin, are at much higher thermal maturity, reflecting great amounts of uplift perhaps associated with compressional regimes generated through terrane accretion. Many sedimentary basins in Alaska, such as the Yukon-Koyukuk and Colville basins, show higher thermal maturity at basin margins, perhaps reflecting greater uplift of the margins in response to isostatic unloading, owing to erosion of the hinterland adjacent to the basin or to compressional stresses adjacent to basin margins.

Alaska↗

USGS1994

Geology of the Blue Mountains region of Oregon, Idaho, and Washington: Stratigraphy, physiography, and mineral resources of the Blue Mountains region

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Idaho, Oregon, Washington↗

USGS2018

Geologic map of the Timberville quadrangle, Virginia

This map of the Timberville 7.5-minute quadrangle in Rockingham and Shenandoah counties, Virginia shows the distribution of Paleozoic-age sedimentary rocks in map and cross-section. Surficial deposits including alluvium and colluvium are also shown. The characteristics of each map unit are described and a brief report discusses the stratigraphy, structure and mineral resources of the area.

Virginia↗

USGS1981

Geology and concepts of genesis of important types of uranium deposits

Uranium ore deposits occur in nearly every major rock type in the earth’s crust, and nearly all igneous, metamorphic, and sedimentary processes are capable of concentrating or dispersing uranium. However, only three types of deposits account for more than 70 percent of known Western World Reasonably Assured Resources (WWRAR): Precambrian quartz-pebble conglomerate type, Proterozoic unconformity type, and Phanerozoic sandstone type. Igneous-related processes in plutonic, volcanic, and magmatic-hydrothermal environments, considered important 25 years ago, now account for less than 10 percent of world resources known at present. The oldest known ore deposits were formed in conglomerates by placer processes under unique anoxic conditions. For the last 2.2 b.y., since oxygenation of the atmosphere, the genesis of both high- and low-temperature deposits has been dominated by three general geochemical processes: (1) oxidation of uranium to soluble U(VI) species permitting aqueous transport, perhaps most commonly as uranyl-carbonate complexes; (2) reduction, principally by C, S −2 , or Fe +2 species, to U(IV) to allow precipitation of uraninite (pitchblende), and coffinite, although the specific reductant commonly cannot be determined because these three tend to be associated geologically; and (3) igneous and metamorphic differentiation caused by exclusion of uranium from crystal structure of most rock-forming minerals. The geochemistry of uranium ore-forming processes has changed in time because of the evolution of life forms and their impact on the earth’s oxygen and carbon budgets. This evolution is reflected in changing predominance of ore types in geologic time: (1) pre-2.8 b.y. ago—no known uranium ore deposits; (2) ca. 2.8 to 2.2 b.y. ago—the first intràcratonic basins and anoxic atmosphere permitted accumulation of placer deposits of uraninite in quartz-pebble conglomerates; these deposits contain about 19 percent of the western world’s resources; (3) ca. 2.2 to 0.4 b.y. ago—following oxygenation of the atmosphere uranium was oxidized and transported as soluble U(VI) complexes to sites of reduction, commonly in organic carbon-rich marginal marine environments. Diagenesis, metamorphism, and near-surface redox enrichment subsequently formed unconformity-type, ultrametamorphic-type, and vein-type ore deposits which together contain more than 25 percent of the western world’s resources; (4) ca. 0.4 b.y. ago to present—after development of land plants the most important ore-forming process was redox-controlled deposition from ground water in continental sediments. Sandstone-type deposits, characteristic of this stage, contain about 40 percent of the western world’s resources.

Book chapter↗

USGS1993

Sedimentary environments within a glaciated estuarine-inner shelf system: Boston Harbor and Massachusetts Bay

Three modern sedimentary environments have been identified and mapped across the glaciated Boston Harbor estuary and adjacent inner shelf of Massachusetts Bay by means of an extensive set of sidescan sonar records and supplemental bathymetric, sedimentary, subbottom and bottom-current data. 1. (1) Environments of erosion and nondeposition appear on the sonographs either as patterns with isolated reflections (caused by outcrops of bedrock, glacial drift, and coastal plain rocks) or as patterns of strong backscatter (caused by coarse-grained lag deposits). Sediments in these environments range from boulder fields to gravelly sands with megaripples. Inside the harbor, areas of erosion or nondeposition are found primarily near mainland and insular shores and within constricted tidal channels, whereas, on the shelf, they are present over extensive areas of hummocky topography near the coast and atop local bathymetric highs offshore. 2. (2) Environments of sediment reworking are characterized on the sonographs by patterns with patches of strong to weak backscatter caused by a combination of erosional and depositional processes. These environments have diverse grain sizes that range from sandy gravels to muds. Within the harbor, the locations of reworked sediments are uncorrelated with the bottom topography, but, on the shelf, they are found on the lower flanks of bathymetric highs, within broad lows and in relatively deep water (30-50 m). 3. (3) Environments of deposition are depicted on the sonographs as uniform patterns of weak backscatter. These areas contain relatively fine-grained muddy sands and muds. Inside the harbor, depositional environments are found over extensive subtidal flats and within sheltered depressions, whereas, on the shelf, they are restricted to broad lows mainly in deep water. The extreme patchiness of modern sedimentary environments within the Boston Harbor-Massachusetts Bay system reflects the interaction between the irregular bottom topography and both geologic and oceanographic processes. The estuarine part of the system is an effective trap for fine-grained detritus because of its protected nature, low wave climate, and large supply of sediments. The open shelf, however, is largely mantled by winnowed and sorted sediments as a result of erosion during past sea-level fluctuations, sediment resuspension and transport by modern waves and currents, and a spatially variable supply of fine-grained sediments.

Massachusetts↗

USGS2022

Extreme rainstorms drive exceptional organic carbon export from forested humid-tropical rivers in Puerto Rico

Extreme rainfall events in the humid-tropical Luquillo Mountains, Puerto Rico export the bulk of suspended sediment and particulate organic carbon. Using 25 years of river carbon and suspended sediment data, which targeted hurricanes and other large rainstorms, we estimated biogenic particulate organic carbon yields of 65 ± 16 tC km −2 yr −1 for the Icacos and 17.7 ± 5.1 tC km −2 yr −1 for the Mameyes rivers. These granitic and volcaniclastic catchments function as substantial atmospheric carbon-dioxide sinks, largely through export of river biogenic particulate organic carbon during extreme rainstorms. Compared to other regions, these high biogenic particulate organic carbon yields are accompanied by lower suspended sediment yields. Accordingly, particulate organic carbon export from these catchments is underpredicted by previous yield relationships, which are derived mainly from catchments with easily erodible sedimentary rocks. Therefore, rivers that drain petrogenic-carbon-poor bedrock require separate accounting to estimate their contributions to the geological carbon cycle.

Puerto Rico↗

USGS2007

Great Basin Paleontological Bibliography

Introduction This work was conceived as a derivative product for 'The Metallogeny of the Great Basin' project of the Mineral Resources Program of the U.S. Geological Survey. In the course of preparing a fossil database for the Great Basin that could be accessed from the Internet, it was determined that a comprehensive paleontological bibliography must first be compiled, something that had not previously been done. This bibliography includes published papers and abstracts as well as unpublished theses and dissertations on fossils and stratigraphy in Nevada and adjoining portions of California and Utah. This bibliography is broken into first-order headings by geologic age, secondary headings by taxonomic group, followed by ancillary topics of interest to both paleontologists and stratigraphers; paleoecology, stratigraphy, sedimentary petrology, paleogeography, tectonics, and petroleum potential. References were derived from usage of Georef, consultation with numerous paleontologists and geologists working in the Great Basin, and literature currently on hand with the authors. As this is a Web-accessible bibliography, we hope to periodically update it with new citations or older references that we have missed during this compilation. Hence, the authors would be grateful to receive notice of any new or old papers that the readers think should be added. As a final note, we gratefully acknowledge the helpful reviews provided by A. Elizabeth J. Crafford (Anchorage, Alaska) and William R. Page (USGS, Denver, Colorado).

Open-File Report↗

USGS2010

Identification of tsunami deposits in the geologic record; developing criteria using recent tsunami deposits

There is a need for a clear procedure to identify tsunami deposits in the geologic record. Data from published studies documenting recent tsunami deposits provide a means of developing identification criteria based on the sedimentary characteristics of unequivocal tsunami deposits. Recent tsunami deposits have many sedimentary characteristics in common. All had sharp or erosional basal contacts. Sand was typically deposited in sheets that blanketed pre-existing topography and generally thinned landward. Deposit thickness was dependent on local topography; deposits were thicker in swales or local depressions and thinner on ridges or topographic highs. Deposits typically had 1-4 layers. Normal grading was common and often confined to individual layers. In muddy environments, sediments contained mud and soil rip-up clasts and mud often capped the deposits or layers. Boulders were often present, either isolated or scattered in groups. Sedimentary structures were rare, and included cross-bedding, laminations, scour and fill structures, and truncated flame structures. The composition, grain size, and surface texture of the grains reflected the coastal and nearshore source for the sediments. These sedimentary characteristics are the basis for developing site-specific tsunami deposit identification criteria that can be used in paleotsunami deposits investigations.

Open-File Report↗

USGS2019

Depth to bedrock based on modeling of gravity data of the eastern part of Edwards Air Force Base, California

We describe a gravity survey acquired to determine the thickness of basin-fill deposits (depth to bedrock) and to delineate geologic structures that might influence groundwater flow beneath the eastern part of Edwards Air Force Base, California. Inversion of these gravity data combined with geologic map and well information provides an estimate of the thickness of basin-fill deposits (defined here as Cenozoic sedimentary and volcanic rocks). After removing the gravitational effect of the basin-fill deposits, the inversion also results in a gravity map that reflects variations in the bedrock density. The depth to bedrock is generally less than 1 kilometer in the map area, except for localized depressions north and south of Kramer Hills, northwest-trending pockets about 4 kilometers northeast of Rogers Lake, and a large depression southwest of Rogers Lake. In the area near Leuhman Ridge, depth to bedrock is shallow. The Spring and Leuhman faults do not coincide with large variations in basin-fill thickness or with prominent gravity gradients, suggestive of minor vertical displacement and minor horizontal displacement at their southeastern mapped extents where they project across a large gravity low.

California↗

USGS1987

Field guide to sedimentary structures in the Navajo and Entrada sandstones in southern Utah and northern Arizona

This field-trip guide describes the common sedimentary structures that occur in eolian sands. The outcrops that are described occur in the Navajo and Entrada Sandstones between the areas of Page, Arizona and St. George, Utah (figure I), but the sedimentary structures of these two sandstones are typical of most eolian deposits. The main part of the guide discusses the geologic setting and the origin of the various structures, and the road log discusses which structures are best displayed at selected outcrops.

Arizona, Utah↗

USGS2026

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California↗

USGS2003

Location and age database for selected foraminifer samples collected by Exxon Petroleum geologists in California

Most of the geologic maps published for central California before 1960 were made without the benefit of age determinations from microfossils. The ages of Cretaceous and Tertiary rocks in the mostly poorly exposed and structurally complex sedimentary rocks represented in the Coast Ranges are critical in determining stratigraphic succession or lack of it, and in determining whether the juxtaposition of similar appearing but different age formations means a fault is present. Since the 1930’s, at least, oil company geologists have used microfossils to assist them in geologic mapping and in determining the environments of deposition of the sediment containing the microfossils. This information has been so confidential that some companies even coded the names of foraminifers to prevent disclosure. In the past 20 years, however, the attitude of petroleum companies about this information has changed, and many of the formerly confidential materials and reports are now available. We report here on 1,964 Exxon foraminifer samples mostly from surface localities in the San Francisco Bay region, and elsewhere in California. Most but not all the samples were plotted on U. S. Geological Survey (USGS) 7.5’ topographic maps or on obsolete USGS 15’ maps. The information from the slides can be used to update geologic maps prepared without the benefit of microfossil data, to analyze the depth and temperature of ocean water covering parts of California during the Mesozoic and Cenozoic Eras, and for solving nomenclature and other scientific problems. A similar report on more than 30,000 slides for surface samples collected by Chevron geologists has been released (Brabb and Parker, 2003), and another report provides information on slides for more than 2000 oil test wells in Northern California (Brabb, Powell, and Brocher, 2001).

California↗

USGS1981

Regional geochemical studies in the Patagonia Mountains, Santa Cruz County, Arizona

The Patagonia Mountains in southern Arizona contain the deeply buried porphyry copper system at Red Mountain as well as a number of other base- and precious-metal mines and prospects. The range contains complex Basin and Range geology with units ranging in age from Precambrian to Holocene. Rock types present include igneous intrusive and extrusive units as well as sedimentary and metamorphic units, most of which have been tectonically disturbed. A total of 264 stream-sediment samples were collected and analyzed for 32 elements. Geochemical maps for Sb, Ag, Pb, Te, B, Mn, Au, Zn, Cu (total), Cu (cold-extractable), and Mo, as well as for Cu (cold-extractable)/Cu (total) and Fe/Mn, are presented. Anomaly patterns for these elements generally occur over the Red Mountain deposit and (or) along a north-northwest trend parallel to the major Harshaw Creek Fault. Much of the entire area sampled contains widespread anomalies for Pb, Te, and Cu; the other elements are only locally anomalous. Various plots of ratios of Cu (cold-extractable) to Cu (total) did not produce any new information not readily apparent on either one of the two copper maps. A plot of ratios of Fe to Mn delineated many areas of pyrite mineralization. Several of these areas may represent the pyritic halos around deeply buried porphyry copper systems. The best ore guide for the Red Mountain porphyry system is the coincidence of positive anomalies of Mo, Pb, and Te and a negative anomaly of Mn. Other areas with anomalies of the same suite of elements are present within the Patagonia Mountains. It is concluded that geochemical sampling, even in a highly contaminated area, can be useful in delineating major geologic features, such as porphyry copper belts and major faults. Multielement geochemical surveys on a regional scale can effectively locate large, deeply buried, zoned mineral systems such as that at Red Mountain. Plots of element ratios, where adequately understood, can provide geochemical information not readily discernible from plots of single elements alone.

Arizona↗

USGS2021

Sedex hydrothermal systems triggered upheavals to marine chemistry and mass extinctions: Applications for ore genesis research and mineral exploration

New USGS research reveals that the discharge of metal-rich brine that formed sedex deposits on ancient seafloors had profound effects on global ocean chemistry and biologic evolution. For example, brine expulsion caused short-duration positive excursions (“spikes”) in the global marine Sr isotope record. While these spikes are unexplained by conventional oceanic models, our chronostratigraphic correlations of major sedex events, combined with mass balance evidence and oceanographic modeling, confirm that the flux of radiogenic Sr from sedex brines during ore formation was sufficient to cause these once enigmatic 87Sr/86Sr spikes. Recognition that the timing of peak 87 Sr/ 86 Sr spikes correlates exactly with global δ 13 C (and δ 18 O) spikes, climate change, deposition of metal-rich black shales and ironstones, metal-induced malformation (teratology) of marine organisms, and mass extinctions, establishes a causal relationship between sedex deposits and these dramatic events in earth history. The relationships among these features are not fully understood. However, our new model demonstrates that the flux of key biolimiting nutrients and metals contained in sedex brines exceeds that of the total modern riverine flux to the ocean. Undoubtably, these immense nutrient fluxes spurred ocean eutrophication, which, ultimately, through a series of positive feedback mechanisms, may be a previously unrecognized trigger of global ocean anoxic events (OAEs) that produced these chemical and biological perturbations. A derivative result from this integrative research is the recognition that OAEs resulted in the formation of “bathtub rim” deposits at redox boundaries along continental margins that concentrated various redox sensitive critical minerals. For example, we have identified midcontinent phosphorite deposits that contains heavy REE grades and tonnages that rival any REE deposit in the world. The recognition that sedex-forming fluid expulsion events are recorded in the global marine isotopic, geologic, and biological records, defines a new approach to the study of and exploration for sedex deposits. Traditional ore genesis research, coupled with chronostratigraphic correlation and high-resolution 87 Sr/ 86 Sr isotope chemostratigraphy can be used to answer long-standing questions about geologic processes responsible for formation of these extraordinary deposits. This approach allows us to constrain, for the first time, the age, duration, and fluxes of fluids and metals vented into the ocean by these giant hydrothermal systems. Accordingly, the fact that large mineralizing events are recorded in the marine sedimentary record opens the tantalizing prospect that we have the ability to conduct effective resource assessments and define prospective basins anywhere in the world. This innovative approach allows for identification of favorable stratigraphic ages and basins and remote evaluation of the size (and, thus, the mineral potential) of undiscovered mineral deposits. This methodology could be applied on regional basin-wide assessments, to evaluate sedimentary basin prospectivity, resource favorability of specific horizons therein, and to the evaluation of the potential of early-stage prospects.

Geological Society of Nevada Newsletter↗

USGS1962

Bedrock geology of the Thiel Mountains, Antarctica

Cordierite-bearing, hyper-sthene-quartz monzonite porphyry, the most widespread rock unit, is intruded by biotite granite and porphyritic biotite granite. Sedimentary and metasedimentary rocks, mainly quartzites and argillites, have been metamorphosed locally to hornfels and have been involved in high-angle faulting. Shear zones are common in the plutonic rocks.

Science↗