SEARCH · USGS Science

Results for “Remote Sensing Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

USGS2010

Establishing a nationwide baseline of historical burn-severity data to support monitoring of trends in wildfire effects and national fire policies

There is a need to provide agency leaders, elected officials, and the general public with summary information regarding the effects of large wildfires. Recently, the Wildland Fire Leadership Council (WFLC), which implements and coordinates National Fire Plan (NFP) and Federal Wildland Fire Management Policies adopted a strategy to monitor the effectiveness and effects of the National Fire Plan and the Healthy Forests Restoration Act. One component of this strategy is to assess the environmental impacts of large wildland fires and identify the trends of burn severity on all lands across the United States. To that end, WFLC has sponsored a 6-year project, Monitoring Trends in Burn Severity (MTBS), which requires the U.S. Department of Agriculture, Forest Service (USDA-FS) and the U.S. Geological Survey (USGS) to map and assess the burn severity for all large current and historical fires. Using Landsat data and the differenced Normalized Burn Ratio (dNBR) algorithm, the USGS/EROS Data Center and USDA-FS/ Remote Sensing Applications Center will map burn severity of all fires occurring from 1984 to 2010. Only fires that are greater than 500 ac in the East, and 1,000 ac in the West will be included. We anticipate mapping a total of more than 9,000 historical fires and fires that occur during the course of the study. The MTBS project will generate burn-severity data, maps, and reports, which will be available for use at local, State, and national levels to evaluate trends in burn severity and help develop and assess the effectiveness of land management decisions. Additionally, the information developed will provide a baseline from which to monitor the recovery and health of fire-affected landscapes over time. Spatial and tabular data quantifying burn severity will augment existing information used to estimate risk associated with a range of current and future resource threats. For example, fire severity data along with associated biophysical characteristics provide an analytical basis for assessing risk from invasive species as well as native insects and pathogens. All data and results will be distributed to the public via a Web interface.

General Technical Report↗

USGS2007

A project for monitoring trends in burn severity

Jeff Eidenshink, Brian Schwind, Ken Brewer, Zhi-Liang Zhu, Brad Quayle, and Elected officials and leaders of environmental agencies need information about the effects of large wildfires in order to set policy and make management decisions. Recently, the Wildland Fire Leadership Council (WFLC), which implements and coordinates the National Fire Plan (NFP) and Federal Wildland Fire Management Policies (National Fire Plan 2004), adopted a strategy to monitor the effectiveness of the National Fire Plan and the Healthy Forests Restoration Act (HFRA). One component of this strategy is to assess the environmental impacts of large wildland fires and identify the trends of burn severity on all lands across the United States. To that end, WFLC has sponsored a six-year project, Monitoring Trends in Burn Severity (MTBS), which requires the U.S. Department of Agriculture Forest Service (USDA-FS) and the U.S. Geological Survey (USGS) to map and assess the burn severity for all large current and historical fires. Using Landsat data and the differenced Normalized Burn Ratio (dNBR) algorithm, the USGS Center for Earth Resources Observation and Science (EROS) and USDA-FS Remote Sensing Applications Center will map burn severity of all fires since 1984 greater than 202 ha (500ac) in the east, and 404 ha (1,000 ac) in the west. The number of historical fires from this period combined with current fires occurring during the course of the project will exceed 9,000. The MTBS project will generate burn severity data, maps, and reports, which will be available for use at local, state, and national levels to evaluate trends in burn severity and help develop and assess the effectiveness of land management decisions. Additionally, the information developed will provide a baseline from which to monitor the recovery and health of fire-affected landscapes over time. Spatial and tabular data quantifying burn severity will augment existing information used to estimate risk associated with a range of current and future resource threats. The annual report of 2004 fires has been completed. All data and results will be distributed to the public on a Web site. A Project for Monitoring Trends in Burn Severity

Fire Ecology↗

USGS2011

Mapping carbon flux uncertainty and selecting optimal locations for future flux towers in the Great Plains

Flux tower networks (e. g., AmeriFlux, Agriflux) provide continuous observations of ecosystem exchanges of carbon (e. g., net ecosystem exchange), water vapor (e. g., evapotranspiration), and energy between terrestrial ecosystems and the atmosphere. The long-term time series of flux tower data are essential for studying and understanding terrestrial carbon cycles, ecosystem services, and climate changes. Currently, there are 13 flux towers located within the Great Plains (GP). The towers are sparsely distributed and do not adequately represent the varieties of vegetation cover types, climate conditions, and geophysical and biophysical conditions in the GP. This study assessed how well the available flux towers represent the environmental conditions or "ecological envelopes" across the GP and identified optimal locations for future flux towers in the GP. Regression-based remote sensing and weather-driven net ecosystem production (NEP) models derived from different extrapolation ranges (10 and 50%) were used to identify areas where ecological conditions were poorly represented by the flux tower sites and years previously used for mapping grassland fluxes. The optimal lands suitable for future flux towers within the GP were mapped. Results from this study provide information to optimize the usefulness of future flux towers in the GP and serve as a proxy for the uncertainty of the NEP map.

Landscape Ecology↗

USGS2019

Recognizing the Famine Early Warning Systems Network: Over 30 years of drought early warning science advances and partnerships promoting global food security

On a planet with more than 7 billion people, how do we identify the millions of drought-afflicted people who face a real threat of livelihood disruption or death without humanitarian assistance? Typically, these people are poor and heavily dependent on rainfed agriculture and livestock. Most live in Africa, Central America, or Southwest Asia. When the rains fail, incomes diminish while food prices increase, cutting off the poorest (most often women and children) from access to adequate nutrition. As seen in Ethiopia in 1984 and Somalia in 2011, food shortages can lead to famine. Yet these slow onset disasters also provide opportunities for effective intervention, as seen in Ethiopia in 2015 and Somalia in 2017. Since 1985, the US Agency for International Development's Famine Early Warning Systems Network (FEWS NET) has been providing evidence-based guidance for effective humanitarian relief efforts. FEWS NET depends on a Drought Early Warning System (DEWS) to help understand, monitor, model and predict food insecurity. Here we provide an overview of FEWS NET's DEWS using examples from recent climate extremes. While drought monitoring and prediction provides just one part of FEWS NET's monitoring system, it draws from many disciplines - remote sensing, climate prediction, agro-climatic monitoring, and hydrologic modeling. Here we describe FEWS NET's multi-agency multi-disciplinary DEWS and Food Security Outlooks. This DEWS uses diagnostic analyses to guide predictions. Mid-season droughts are monitored using multiple cutting-edge earth observing systems. Crop and hydrologic models can translate these observations into impacts. This information feeds into FEWS NET reports, helping to save lives by motivating and targeting timely humanitarian assistance.

Bulletin of the American Meteorological Society↗

USGS2006

Calibrated Landsat ETM+ nonthermal-band image mosaics of Afghanistan

In 2005, the U.S. Agency for International Development and the U.S. Trade and Development Agency contracted with the U.S. Geological Survey to perform assessments of the natural resources within Afghanistan. The assessments concentrate on the resources that are related to the economic development of that country. Therefore, assessments were initiated in oil and gas, coal, mineral resources, water resources, and earthquake hazards. All of these assessments require geologic, structural, and topographic information throughout the country at a finer scale and better accuracy than that provided by the existing maps, which were published in the 1970s by the Russians and Germans. The very rugged terrain in Afghanistan, the large scale of these assessments, and the terrorist threat in Afghanistan indicated that the best approach to provide the preliminary assessments was to use remotely sensed, satellite image data, although this may also apply to subsequent phases of the assessments. Therefore, the first step in the assessment process was to produce satellite image mosaics of Afghanistan that would be useful for these assessments. This report discusses the production and characteristics of the fundamental satellite image databases produced for these assessments, which are calibrated image mosaics of all six Landsat nonthermal (reflected) bands.

Open-File Report↗

USGS2008

Technical Manual for the Geospatial Stream Flow Model (GeoSFM)

The monitoring of wide-area hydrologic events requires the use of geospatial and time series data available in near-real time. These data sets must be manipulated into information products that speak to the location and magnitude of the event. Scientists at the U.S. Geological Survey Earth Resources Observation and Science (USGS EROS) Center have implemented a hydrologic modeling system which consists of an operational data processing system and the Geospatial Stream Flow Model (GeoSFM). The data processing system generates daily forcing evapotranspiration and precipitation data from various remotely sensed and ground-based data sources. To allow for rapid implementation in data scarce environments, widely available terrain, soil, and land cover data sets are used for model setup and initial parameter estimation. GeoSFM performs geospatial preprocessing and postprocessing tasks as well as hydrologic modeling tasks within an ArcView GIS environment. The integration of GIS routines and time series processing routines is achieved seamlessly through the use of dynamically linked libraries (DLLs) embedded within Avenue scripts. GeoSFM is run operationally to identify and map wide-area streamflow anomalies. Daily model results including daily streamflow and soil water maps are disseminated through Internet map servers, flood hazard bulletins and other media.

Open-File Report↗

USGS2010

EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

Data Series↗

USGS2006

Mountain hydrology of the western United States

Climate change and climate variability, population growth, and land use change drive the need for new hydrologic knowledge and understanding. In the mountainous West and other similar areas worldwide, three pressing hydrologic needs stand out: first, to better understand the processes controlling the partitioning of energy and water fluxes within and out from these systems; second, to better understand feedbacks between hydrological fluxes and biogeochemical and ecological processes; and, third, to enhance our physical and empirical understanding with integrated measurement strategies and information systems. We envision an integrative approach to monitoring, modeling, and sensing the mountain environment that will improve understanding and prediction of hydrologic fluxes and processes. Here extensive monitoring of energy fluxes and hydrologic states are needed to supplement existing measurements, which are largely limited to streamflow and snow water equivalent. Ground‐based observing systems must be explicitly designed for integration with remotely sensed data and for scaling up to basins and whole ranges.

Water Resources Research↗

USGS2007

Landsat ETM+ False-Color Image Mosaics of Afghanistan

In 2005, the U.S. Agency for International Development and the U.S. Trade and Development Agency contracted with the U.S. Geological Survey to perform assessments of the natural resources within Afghanistan. The assessments concentrate on the resources that are related to the economic development of that country. Therefore, assessments were initiated in oil and gas, coal, mineral resources, water resources, and earthquake hazards. All of these assessments require geologic, structural, and topographic information throughout the country at a finer scale and better accuracy than that provided by the existing maps, which were published in the 1970's by the Russians and Germans. The very rugged terrain in Afghanistan, the large scale of these assessments, and the terrorist threat in Afghanistan indicated that the best approach to provide the preliminary assessments was to use remotely sensed, satellite image data, although this may also apply to subsequent phases of the assessments. Therefore, the first step in the assessment process was to produce satellite image mosaics of Afghanistan that would be useful for these assessments. This report discusses the production of the Landsat false-color image database produced for these assessments, which was produced from the calibrated Landsat ETM+ image mosaics described by Davis (2006).

Open-File Report↗

USGS2007

Development of a global slope dataset for estimation of landslide occurrence resulting from earthquakes

Landslides resulting from earthquakes can cause widespread loss of life and damage to critical infrastructure. The U.S. Geological Survey (USGS) has developed an alarm system, PAGER (Prompt Assessment of Global Earthquakes for Response), that aims to provide timely information to emergency relief organizations on the impact of earthquakes. Landslides are responsible for many of the damaging effects following large earthquakes in mountainous regions, and thus data defining the topographic relief and slope are critical to the PAGER system. A new global topographic dataset was developed to aid in rapidly estimating landslide potential following large earthquakes. We used the remotely-sensed elevation data collected as part of the Shuttle Radar Topography Mission (SRTM) to generate a slope dataset with nearly global coverage. Slopes from the SRTM data, computed at 3-arc-second resolution, were summarized at 30-arc-second resolution, along with statistics developed to describe the distribution of slope within each 30-arc-second pixel. Because there are many small areas lacking SRTM data and the northern limit of the SRTM mission was lat 60?N., statistical methods referencing other elevation data were used to fill the voids within the dataset and to extrapolate the data north of 60?. The dataset will be used in the PAGER system to rapidly assess the susceptibility of areas to landsliding following large earthquakes.

Open-File Report↗

USGS2020

Use of remote sensing tools to predict focal areas for sea turtle conservation in the Southwestern Atlantic

Fisheries bycatch of non-target species in the commercial fleet is a major source of anthropogenic injury and mortality for sea turtles and marine megafauna. The Río de la Plata maritime front (RLPMF) and its adjacent international waters – comprising part of the Argentine and Uruguayan exclusive economic zones, is a highly important fishing ground in the south-western Atlantic Ocean as well as feeding and development grounds for sea turtles. This paper analyses the distribution of the bottom and pelagic trawling fishery within the RLPMF using information from Vessel Satellite Monitoring System. With this information, areas of highest trawling intensity were defined and further evaluated their overlap with sea turtle habitat-use areas from available sea turtle satellite tracking information. Results besides identifying high-susceptibility areas for sea turtle bycatch by the commercial trawler fleet along the RLPMF, provide predictive tools to identify vulnerable areas to interaction of sea turtles and the commercial fishing fleet. Implementation of bycatch mitigation measures, such as reduced fishing effort areas by the Argentine and Uruguayan fisheries management agencies has the potential to benefit the fisheries as well as marine megafauna. Furthermore, there is a need for additional research on the impact that this fleet can have on sea turtles present in the area.

Rio de la Plata↗

USGS1981

The logic of multispectral classification and mapping of land

The use of multispectral reflectance data as surrogates for land attributes must be done within strict rules of logic and with a recognition of judgmental factors such as the use of a priori or a posteriori classification schemes. The naming and describing of spectral classes as surrogates of information classes is a critical element in the logic of mapping and must be complete and logically consistent. Maps of information classes derived from multispectral data should be portrayed without class boundaries so as to indicate the degree of homogeneity or heterogeneity of classes on maps in which these characteristics are of major importance.

Remote Sensing of Environment↗

USGS1975

Norfolk and environs: A land use perspective

The Norfolk-Portsmouth Standard Metropolitan Statistical Area (SMSA) in southeastern Virginia was the site of intensive testing of a number of land resources assessment methods, built around the availability of remotely sensed data from the Earth Resources Technology Satellite (ERTS-I), later renamed LANDSAT I. The Norfolk tests were part of a larger experiment known as the Central Atlantic Regional Ecological Test Site (CARETS), designed to test the extent to which LANDSAT and associated high-altitude aircraft data could be used as cost-effective inputs to a regional land use information system. The Norfolk SMSA contains a variety of land uses typical of the urbanized eastern seaboard, along with typical associated problems: rapid urbanization; heavy recreational, commercial, and residential demands on fragile beaches and coastal marsh environments; industrial, transportation, and governmental land and water uses impacting on residential and agricultural areas; drainage and land stability difficulties affecting construction and other uses; and increasing difficulties in maintaining satisfactory air and water quality.

Delaware;Maryl;New Jersey;North Carolina;Pennsylva↗

USGS1975

Norfolk and environs: A land use perspective

Delaware;Maryl;New Jersey;North Carolina;Pennsylva↗

USGS1983

A short-pulse electromagnetic transponder for hole-to-hole use

We have made hole-to-hole observations through nearly 20 m of granite using an electromagnetic transponder (an active reflector) in one borehole and a single-hole short-pulse radar in another. We found that the transponder is inexpensive, operationally simple, and effective in extending the capability of a short-pulse borehole radar system to allow hole-to-hole operation without requiring timing cables. A detector in the transponder senses the arrival of each pulse from the radar (which may be millivolts in amplitude); each pulse detection triggers a kilovolt-amplitude pulse for retransmission. The transponder “echo” may be stronger than that of a passive reflector by a factor of as much as 120 dB. The result is an increase in range capability by a factor which depends on attenuation in the medium and hole-to-hole wavepath geometry. Single-hole reflection-mode echoes are still available at times prior to the transponder pulse arrival. The transponder is helpful in yielding velocity information, because the radar-transponder distance is known and the echo time is observed. Field tests have demonstrated that the transponder is a useful alternative to employing timing cables in some short-pulse hole-to-hole measurement situations.

IEEE Transactions on Geoscience and Remote Sensing↗

USGS2025

Estimating agricultural irrigation water consumption for the High Plains aquifer region with integrated energy- and water-balance evapotranspiration modeling approaches

Estimation of irrigation water use provides essential information for the management and conservation of agricultural water resources. Conventionally, water use data are created based on reports and surveys from water users, whereas manual records may not be complete due to lacking flow meters, measurement gaps, inconsistent methods across regions, and time- and cost-consuming data processing. Alternatively, spatially explicit estimation of irrigation water use can be conducted efficiently using remote sensing evapotranspiration (ET) modeling approaches. In this study, we created a gridded blue water evapotranspiration (BWET) dataset to estimate historical irrigation water consumption (1986 – 2020) in the croplands across the United States High Plains aquifer region. The BWET data were generated by integrating an energy-balance ET model [Operational Simplified Surface Energy Balance model (SSEBop)] and a water-balance ET model [Vegetation ET model (VegET)]. BWET in croplands indicates crop consumptive use of irrigation water extracted from surface water and groundwater resources. The BWET estimates were compared with reported irrigation water use data for all counties within the aquifer region. The results revealed high agreement between growing season (May – September) BWET and annual water withdrawal at county level. Specifically, correlation coefficients of volumetric BWET and water withdrawal were 0.90 and 0.96, respectively, for the entire aquifer region and western Kansas. The timeseries of BWET and water withdrawal showed similar temporal trends and high covariations. The BWET estimates were systematically lower than the water withdrawal measurements, which was primarily attributed to blue water losses in the irrigation system. The irrigation efficiency, calculated as the ratio of BWET to water withdrawal depth, was 0.57 and 0.74 for the entire aquifer region and western Kansas, respectively. This study demonstrates the capability of using satellite-based ET models (e.g., SSEBop and VegET) to efficiently estimate crop water consumption and evaluate irrigation efficiency at landscape, county, and regional scales.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗

USGS2024

Restoration monitoring metric framework: Integrating innovative remote-sensing technologies: Comparisons between field and remotely sensed vegetation surveys of restored forested and grassland sites in Ohio

Restoration monitoring is generally perceived as costly and time-consuming, yet the concept of universal restoration monitoring metrics is trending for evaluation of restoration performance across spatial scales, project boundaries, and jurisdictions. Natural Resource Damage Assessment and Restoration (NRDAR) practitioners seek to restore natural resources injured by oil spills or hazardous substance releases into the environment. Therefore, a multiagency team [US Army Engineer Research and Development Center (ERDC), US Department of the Interior (DOI), and US Department of Energy (DOE)] developed and field-tested a multitiered monitoring framework, illustrating a range of field and remote-sensing techniques and methodologies. The restoration monitoring framework and field demonstration offer a unique methodology to acquire and evaluate simultaneously collected, multiscale/multiplatform data. The result of this research provides new insights to (1) assist planning, implementing, and monitoring restoration progress and effectiveness; and (2) apply common monitoring methods, endpoints, and metrics to other types of ecosystem restoration initiatives. Although the aim was to inform monitoring and management of areas that had been injured, these methods could also be used to inform restoration monitoring practices in a broader context, benefiting environmental stewardship missions of all project partners.

Final Technical Report↗

USGS1986

Applications of Landsat data and the data base approach

A generalized methodology for applying digital Landsat data to resource inventory and assessment tasks is currently being used by several bureaux and agencies within the US Department of the Interior. The methodology includes definition of project objectives and output, identification of source materials, construction of the digital data base, performance of computer-assisted analyses, and generation of output. The USGS, Bureau of Land Management, US Fish and Wildlife Service, Bureau of Indian Affairs, Bureau of Reclamation, and National Park Service have used this generalized methodology to assemble comprehensive digital data bases for resource management. Advanced information processing techniques have been applied to these data bases for making regional environmental surveys on millions of acres of public lands at costs ranging from $0.01 to $0.08 an acre.-Author

Photogrammetric Engineering and Remote Sensing↗