USGS ScienceSearch

SEARCH · USGS Science

Results for “Ore and Energy Resource Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 37Linked to original sources

Noble and base metal distribution and processes affecting ore tenors in the disrupted lower stratigraphy of the Stillwater Complex, USA

Exploration continues for contact-style Ni-Cu sulfide and chromitite-associated PGE mineralization in ultramafic rocks of the Stillwater Complex. At the Iron and Chrome Mountain areas, massive sulfides occur along the complex’s footwall contact and anomalous concentrations of PGE+Au are associated with the three lowermost chromitite seams. Southeast of Chrome Mountain, magmatic layering is highly disrupted by the presence of faults, magmatic breccias, serpentinized discordant dunites, pyroxenite pegmatoids, and disaggregated chromitite seams. The bulk rock chemistry, sulfide chemistry, and noble metal mineralogy of samples from this area were examined to determine the deportment of PGE and processes that led to enrichments in PGE, Au, Cu, Co and Ni. Results show that a sulfide liquid was the principal collector of PGE. If sulfide liquid was initially deposited with chromite, it was disaggregated or redistributed by subsequent melt or fluid infiltration, which may have resulted in the offset of peak PGE(+Cu, Ni) from peak Cr 2 O 3 concentrations, and upgraded PGE tenors. Upon cooling, PGE exsolved from sulfides to form discrete bismuth tellurides, arsenides, arsenic sulfides, antimonides, and alloys, commonly along the margins of sulfide globules. Calculated metal tenors are highest in the disseminated sulfides southwest of Chrome Mountain, whereas massive and net-textured sulfides near the Iron Mountain-Camp zone represent monosulfide solid solution cumulates. At progressively shallower levels, higher metal tenors combined with lower S/Se ratios are consistent with increasing R-factors from 100 to 100,000. Serpentinization and talc-tremolite alteration resulted in S loss through partial replacement of sulfides by secondary silicate+carbonate+magnetite+sulfide assemblages, further upgrading Ni-Cu-PGE tenors. The present work shows that processes responsible for the disruption of magmatic layering and post-magmatic fluid alteration along the intrusion’s lower contact led to noble and base metal enrichments.

Montana

Complex carbonate ore mineralogy in the Mountain Pass carbonatite rare earth element deposit, USA

Economic concentrations of rare earth element (REE) minerals are uncommon in the Earth’s crust, with most occurring in carbonatites. Unlike most igneous rocks composed of silicate minerals, carbonatites are dominated by carbonate minerals, some of which can incorporate significant light REEs (LREEs; La, Ce, Pr, Nd). Technological applications of REEs are numerous and they have been identified as some of the most critical mineral commodities to the global economy. The Mountain Pass carbonatite stock in the Mojave Desert of California is the most economically significant REE deposit in the USA and contains a few to tens of percent (by volume) of the carbonate REE ore mineral bastnäsite. Despite the economic significance of the Mountain Pass deposit, studies of its ore mineralogy are limited. Here we present new carbonate ore mineralogy data for a compositionally diverse suite of carbonatitic rocks from the Mountain Pass stock and related dikes. Whole-rock geochemical data are integrated with mineral-scale textural and chemical data obtained by scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and microRaman spectroscopy. Our results document a complex spectrum of REE-bearing carbonate minerals and intermediate mixed-layer structures. Mineral species include bastnäsite [REE(CO 3 )F], hydroxylbastnäsite [REE(CO 3 )OH], parisite [Ca(REE) 2 (CO 3 ) 3 F 2 ], synchysite [Ca(REE)(CO 3 ) 2 F], röntgenite [Ca 2 (Ce,La) 3 (CO 3 ) 5 F 3 ], and sahamalite [(Mg,Fe 2+ )(REE) 2 (CO 3 ) 4 ]. Carbonate ore mineralogy is heterogeneous within and between samples, including at the intracrystal scale. Complexly zoned crystals exhibit as many as five to six different compositional domains and syntaxial intergrowths, commonly with the more Ca-rich varieties (parisite, synchysite) forming crystal rims that surround relict bastnäsite cores. We attribute the phenocryst variability to changes in the chemistry and temperature of primary carbonatite magmas and evolved/exsolved fluids. Cross-cutting vein textures of calcite, celestine and various REE carbonate minerals, interstitial bastnäsite crystallization, breccia blocks lined by fine-grained bastnäsite, and the presence of hydroxylbastnäsite and partially hydroxylated bastnäsite point to the role of secondary hydrothermal processes in REE mineralization. Fluorcarbonate mineral compositions demonstrate that La and Ce are more structurally abundant in bastnäsite, whereas the more Ca-rich species (parisite, synchysite) contain a greater proportion of REE heavier than Pr (Nd, Sm, Eu, Gd) and Y. Atomic ratios of Pr/(Nd + Pr) are likewise variable, with the highest average value for bastnäsite (0.25) compared to parisite (0.22) and sychysite (0.21). This finding has geometallurgical implications, given that current mining operations are focused on recovery of Nd and Pr for high field strength permanent magnets and the Nd/Pr ratios are a critical factor in ore processing and magnet manufacture.

California

Groundwater-level elevations in the bedrock aquifers of the Denver Basin aquifer system, Elbert County, Colorado, 2015–23

Water users in Elbert County, Colorado, rely on groundwater from bedrock aquifers in the Denver Basin aquifer system (upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) for approximately half of their water uses. Withdrawals from the bedrocks aquifers have increased to meet the water use needs of expanding regional population growth and development. The U.S. Geological Survey, in cooperation with the Elbert County Board of County Commissioners, began a study in 2015 to monitor groundwater levels within Elbert County. The primary purpose of this report is to present a summary of groundwater levels measured during the study period (2015–23) and present results from statistical analyses of changes in groundwater-level elevations through time. Discrete groundwater levels were measured at 36 wells within Elbert County. Seven of those wells contained equipment to make and record continuous groundwater-level measurements at hourly intervals. All aquifers, except the lower Dawson aquifer, had only declining groundwater-level elevations in discrete measurements for wells with statistically significant trends. Of the eight statistically significant trends in the lower Dawson aquifer, two wells indicated increasing groundwater-level elevation from discrete measurements. The groundwater-level elevation trend medians in the upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers were −0.23, −0.66, −0.64, −0.39, and −0.63 feet per year, respectively, for discrete groundwater-level elevation measurements. Trends in continuous groundwater-level elevations were in agreement with statistically significant trends in discrete groundwater-level elevations for all wells. The groundwater-level elevation trend medians in this study, compared to the overall trends in a 2015−2018 study, both indicated declining groundwater-level elevations except in the upper Dawson aquifer, where the trend direction was opposite, a positive trend from 2015 to 2018 and a negative trend (declining groundwater elevations) from 2015 to 2023. The change in trends within the upper Dawson aquifer may be affected by differences in the study period and the trend analysis applied. Trends during the 2015–23 study period were compared to departures from the median 2015 groundwater-level elevation for each site in each aquifer. In general, the departures from the 2015 median supported trends observed at each site and correlated spatially with greater departures near the western border of Elbert County. Additionally, 30-year precipitation data showing wet and dry periods were overlaid with the departure from the 2015 median to assess groundwater-level patterns in wells in the five aquifers. Departures from the 2015 median groundwater-level elevations appeared greatest during the dry period between 2020 and 2023. Potentiometric-surface maps of the upper and lower Dawson aquifers created from static April 2023 groundwater elevations indicated groundwater-flow direction is generally from the south to the north. Results of this study could be used to guide additional groundwater monitoring in Elbert County and could aid in long-term planning of water resources.

Colorado

To heal or not to heal?: 2. The moment-recurrence time behavior of repeating earthquakes in the 2011 Prague, Oklahoma aftershock sequence is consistent with laboratory healing rates

The timing and failure conditions of an earthquake are governed by the interplay between fault reloading and restrengthening. The moment-recurrence time behavior of repeating earthquakes can give observational estimates of fault healing rates; however, it is difficult to link these observed healing rates to laboratory studies of frictional healing in part because of uncertainty in lithology. Here, we study the 2011 Prague earthquake sequence, which includes repeating earthquakes in the Arbuckle group and the granitic basement, and compare them to laboratory experiments on samples of the Arbuckle and Troy granite (representative of the basement rock) (Okamoto et al., 2025, https://doi.org/10.1029/2024JB030573 ). We find three spatially distinct groups of repeating earthquakes with different moment-recurrence behavior: (a) constant moment-recurrence time in the Arbuckle group, (b) scattered moment-recurrence time at the intersection of the foreshock-mainshock fault in the granitic basement, and (c) moment-predictable behavior outside of the foreshock-mainshock fault intersection also in the granitic basement. Our observation of stagnant healing for repeating sequences in the Arbuckle group is consistent with laboratory observations of low healing rates for moderately high pore fluid pressures in Arbuckle samples. For the moment-predictable group, the source radius that is required in order to match healing rates is consistent with source radius estimations when taking into account reasonable attenuation of the P- pulse width. Overall, we observe diverse healing behaviors in the seismic families that are consistent with laboratory healing rates, providing seismic evidence that contact-scale frictional mechanisms are relevant to large-scale earthquake dynamics.

Oklahoma

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

Evaluation of water quality in the Langford Valley–Irwin Groundwater Subbasin, Fort Irwin National Training Center, California, 1993–2019

The U.S. Army Fort Irwin National Training Center (NTC), 120 miles northeast of Los Angeles in the Mojave Desert of California, obtains its potable water supply from the Bicycle Valley and Langford Valley groundwater basins; Langford Valley groundwater basin is further subdivided into the Langford Well Lake and Irwin groundwater subbasins. The Irwin groundwater subbasin contains younger, unconsolidated deposits that have a saturated thickness of as much as 200 feet (ft) and a lower aquifer within older unconsolidated deposits as thick as 650 ft. Groundwater recharge under predevelopment conditions (before 1941) occurred primarily from infiltration of intermittent streamflow in small washes that cross the Irwin groundwater subbasin. Since that time, groundwater recharge has increased because of growth of the NTC in recent years and as a result of other processes, including (1) infiltration of treated wastewater into the aquifer through ponds near the NTC wastewater treatment facility (WWTF) and (2) infiltration of imported water and treated wastewater used for landscape irrigation at base housing and athletic fields. Water samples were collected from 17 wells and analyzed for field parameters, chemical constituents, and isotope composition in the Irwin groundwater subbasin between 2014 and 2019. These data were supplemented with water-chemistry data collected during 1993–95 and at other times if available. Between 1993–95 and 2015–19, median dissolved solids and nitrate concentrations in water from wells in the Irwin groundwater subbasin increased from 620 to 1,030 milligrams per liter (mg/L) and from 2.8 to 4.5 mg/L as nitrogen, respectively. After 2014, dissolved solids and nitrate concentrations in water from wells near the NTC WWTF decreased as a result of changes in source water quality attributable to reverse osmosis of treated drinking water delivered within the Irwin groundwater subbasin and to increased levels of treatment at the NTC WWTF. Based on delta oxygen-18 and delta deuterium isotope data, increases in dissolved solids concentrations in water from most wells were consistent with evaporation prior to recharge and mobilization of soluble salts from the unsaturated zone. Arsenic and fluoride concentrations in water from wells decreased between 1993–95 and 2015–19 as the basin filled with treated wastewater, but 2015–19 concentrations generally exceeded the California State Water Resources Control Board maximum contaminant levels of 10 micrograms per liter for arsenic and 2 mg/L for fluoride. Most groundwater in the Irwin groundwater subbasin has unadjusted carbon-14 ages ranging from 18,400 to 12,350 years before present. However, water from well 10E3, located along the wash near the subbasin outflow in the southeastern part of the Irwin groundwater subbasin, contained measurable tritium, which is consistent with infiltration of intermittent streamflow and groundwater recharge from the wash after 1952. Chemical and isotopic data indicate that treated wastewater is present in water from most wells in the upper aquifer that underlies the Irwin groundwater subbasin. Wells were not sampled to adequately determine the extent of treated wastewater and changes in water quality within the lower aquifer that underlies the Irwin groundwater subbasin.

California

Seasonal migrations and other movements

In the past 25 years new information has been obtained on the migrations and movements of mountain sheep (bighorn [Ovis canadensis], thinhorn [Ovis dalli]). This chapter provides a comprehensive overview of mountain sheep migration and other movements across their broad distribution in western North America. Across the range of mountain sheep, migrations and other seasonal movements define a complex movement portfolio that relates to and supports all aspects of mountain sheep ecology. Bighorn and thinhorn species have examples of migratory behaviors that span the continuum between annual residents and long-distance migrants. Migratory behaviors can be characterized as low- or high-elevation residents; elevational migrations and other variants; and geographic migrants. Native populations that have been extant on the landscape without notable human intervention have greater migratory propensity and more diverse migratory portfolios due to the maintenance of migration through cultural learning and social transmission. Restored and augmented populations, where the population-level knowledge of migration has been lost or greatly reduced, are largely nonmigratory, although translocations show some ability to restore short-distance elevational migrations. Seasonal spring and fall migrations are less common in desert bighorn sheep (O. canadensis spp.) or bighorn sheep living in canyon or prairie breaks landscapes. Mineral lick visitation is important and common across the range of mountain sheep. Managing for migratory diversity can help to sustain migratory behavior in the face of climate change and other anthropogenic pressures, which can limit landscape connectivity between seasonal ranges or alter the spatiotemporal dynamics of regional phenology with cascading effects to other biotic and abiotic interactions such as the need to balance forage and predation risk or the spatial refugia with increased temperatures.

Book chapter

Greater sage-grouse habitat of Nevada and northeastern California—Integrating space use, habitat selection, and survival indices to guide areas for habitat management

Executive Summary Greater sage-grouse populations ( Centrocercus urophasianus ; hereafter sage-grouse) are threatened by a suite of disturbances and anthropogenic factors that have contributed to a net loss of sagebrush-dominant shrub cover in recent decades. Declines in sage-grouse populations are largely linked to habitat loss across their range. A key component of conservation and land use planning efforts for sage-grouse involves the continued monitoring and modeling of habitat requirements and suitability across its range. The Bureau of Land Management (BLM) is addressing the management of sage-grouse habitats on BLM-authorized public lands throughout the western United States through a land use planning amendment and associated environmental impact statement (86 FR 66331). More than 25 percent of the range-wide distribution of sage-grouse is within Nevada and northeastern California, and information on sage-grouse distribution and habitat requirements is important to guide appropriate management decisions. Therefore, the BLM has identified the need for updated spatially explicit information on sage-grouse habitat in Nevada and northeastern California to guide the land use planning amendment and associated management decisions. To address this need, researchers with the U.S. Geological Survey, in close cooperation with multiple State and Federal resource agency partners, including BLM, Nevada Department of Wildlife (NDOW) and California Department of Fish and Wildlife (CDFW), sought to map sage-grouse distribution and produce example habitat designations in these states. Herein, we report results of our primary study objective, which was to map sage-grouse habitat and create example habitat management areas, based on more than a decade of location and survival data collected from marked sage-grouse across the study region coupled with lek count survey data managed by the NDOW and the CDFW. We expanded on previously developed methodology to incorporate information on habitat selection and survival during reproductive life stages and specific seasons with updated sage-grouse location and known fate datasets, while also including brood-rearing areas that are understood to be threatened and important for population persistence. We combined predictive habitat map surfaces for each life stage and season with updated information on current occupancy patterns to classify habitat based on its suitability and probability of occupancy. We carried out additional steps to delineate specific example habitat management areas, specifically (1) incorporated corridors connecting key nesting and brood-rearing habitat, (2) corrected outputs for pre-wildfire habitat conditions within areas burned in the last 16 years, and (3) masked out areas of anthropogenic development. Our methodological example of deriving habitat management areas was intended to help inform decisions by BLM and other land managers regarding conservation and management of sage-grouse. Associated data products in the form of habitat maps provide updated, detailed, and comprehensive information about the status of habitats and can be useful to partner agencies in their efforts to designate and rank habitats for this species of high conservation concern in Nevada and California, with full recognition that on-the-ground field data and local sources of information and expertise should be used in conjunction with inferences from these models.

California, Idaho, Nevada

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States

Seismic techniques and suggested instrumentation to monitor volcanoes

Introduction Changes in the pressure or location of magma can stress or break surrounding rocks and trigger flow of nearby waters and gases, causing seismic signals, such as discrete earthquakes and tremor. These phenomena are types of seismic unrest that commonly precede eruption and can be used to forecast volcanic activity. Mass movements at the surface, including avalanches, debris flows, and lahars, may also generate seismic signals that are specifically addressed in chapter H , this volume (Thelen and others, 2024). Our focus in this chapter is to determine the levels of instrumentation recommended to produce high-quality, well-constrained seismic observations important for early warning of impending eruptions, detecting changes in ongoing eruptions, and characterizing other hazardous volcanic events. There are emerging techniques and new types of instrumentation, such as distributed acoustic sensing or rotational seismometers, that we do not consider here. These types of instrumentation show promise for monitoring but still require maturation before being considered more generally in volcano monitoring. Most of the capabilities mentioned below are universal for all types of volcanic systems, although some are best applied to stratovolcanoes with an apical single vent. In some settings, such as calderas or shield volcanoes, we must broaden coverage to include multiple possible storage regions or vent locations. As an example, Thelen (2014) discretized the long rift zones of shield volcanoes in Hawaiʻi as a set of evenly spaced “vents.” In this construct, each vent comes with recommendations, and several thousand network configurations were simulated to assess the effect on network quality levels and to determine the most efficient network design. The same process could be applied in a caldera setting or a volcanic field, where an evenly spaced grid of potential vents is considered. Localized recommendations for each unique system are beyond the scope of this report and left up to local experts to assess based on the conditions, restrictions, and requirements of each volcano.

Scientific Investigations Report

Waters divided: A history of alluvial fan research and a view of its future

Flows exiting confined valleys tend to deposit sediment in fan-shaped landforms. Where deposition is wholly or largely by the tractive forces of flowing water, these landforms are called alluvial fans. They are the product of the progressive division of water and sediment downfan, from slopes that may exceed 0.10 to distal slopes that may be below 0.01. Channel depths also tend to decline, from values that approach one to several meters at steep fanheads, to a few decimeters at distal fan margins. The result is a radiating, depositional ramp where confined or unconfined flows transport sediment from source basins to bounding streams, subsiding basins, or stable platforms. Where streams or subsiding basins consume the sediment supply from the source basin, the fan may approach a steady form whose extent and distal slope are set by stream location or subsidence rate. Where boundary conditions do not remove sediment, the fan may prograde out to long distances and low slopes (<0.01). Theoretical and experimental work over the past several decades support the notion that alluvial fan long-profiles become steeper as sediment supply increases or transport capacity decreases, and increasingly concave upward as the rate of bed material deposition decreases downfan. Grainsize distributions of alluvial fans seem to span the range observed in alluvial rivers, with no processes that uniquely identify them, apart from the distributary pattern of deposition. Bed sand cover tends to increase downfan in arid-region fans, with an absence of systematic downfan fining of coarser grain sizes. Surficial mapping and geochronology have demonstrated that fan deposition varies greatly through time, arguably from climate variations that alter hillslope sediment supply. The combination of surficial mapping and hydraulic modeling with high-resolution topography can now produce detailed flood susceptibility maps. The effective use of these maps to protect lives and property, however, depends on answering many of the enduring questions about the mechanics of how water and sediment divide down alluvial fans.

Book chapter

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee

Aspergillosis (Avian) case definition for wildlife

Diagnostic laboratories receive carcasses and samples for diagnostic evaluation and pathogen/toxin detection. Case definitions bring clarity and consistency to the evaluation process. Their use within and between organizations allows more uniform reporting of diseases and etiologic agents. The intent of a case definition is to provide scientifically based criteria for determining: (a) if an individual carcass has a specific disease and degree of confidence in that diagnosis and (b) if there is evidence of a pathogen or toxin in a carcass or sample (for example, swab, tissue sample, skin scraping, blood/serum sample, environmental sample, or other). This case definition is specific to aspergillosis and applies to all avian species.

Techniques and Methods

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta

Heat-flow data from southeastern Oregon

With the exception of values from two holes drilled within 2 km of Mickey Hot Springs, 17 new heat-flow values in southeastern Oregon are within or somewhat below the range one would normally expect in non-anomalous parts of the North American Cordillera. This is not surprising for a region in which most igneous rocks on the surface are 5 m.y. old or more. There is a suggestion of a thermal anomaly associated with the very young (late Pleistocene or Holocene) Diamond Craters lava field, and the thermal regime on both sides of Steens Mountain seems to be controlled, to some degree, by lateral and vertical movement of water.

Oregon

Disparate groundwater responses to wildfire

Post-wildfire investigations of groundwater response reveal a range of outcomes, varying from substantial increases to notable decreases in recharge and baseflow, with some studies indicating negligible or short-lived effects. This review assesses these varied responses within five critical categories: climate, vegetation, hydrogeology, fire characteristics, and the cryosphere, examining both short-term (within 2 years) and intermediate (2–10 years post-fire) effects. Despite considerable variability, some consistent patterns emerge. For instance, in hydroclimatic settings where water input and evaporative demand cycles are out of sync, post-wildfire groundwater responses tend to be positive (i.e., increased flux or storage), whereas under low fire severity conditions or in vegetation types that quickly recover, groundwater responses tend to be negative (i.e., decreased flux or storage). We synthesize relevant findings into a compendium of testable hypotheses aimed at explaining the spatiotemporal variability in observed post-wildfire groundwater responses. A recurring theme is the critical influence of the pre-wildfire groundwater regime on expected response and recovery. We identify opportunities for specific improvements in post-wildfire monitoring and modeling that would further advance capabilities to predict groundwater response. A key area for further research is understanding how wildfire effects on snow dynamics and other cryospheric processes translate to changes in groundwater.

WIREs Water

A model uncertainty quantification protocol for evaluating the value of observation data

The history-matching approach to parameter estimation with models enables a powerful offshoot analysis of data worth—using the uncertainty of a model forecast as a metric for the worth of data. Adding observation data will either have no impact on forecast uncertainty or will reduce it. Removing existing data will either have no impact on forecast uncertainty or will increase it. The history-matching framework makes it possible to perform this quantitative analysis leveraging the connections among observations, model parameters, and model forecasts. We show this behavior on a specific groundwater flow model of the Mississippi Alluvial Plain and show where the analysis can be informative for considering the potential design of an observation network based on existing or potential observations.

Scientific Investigations Report

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater