USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research: Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources
USGS2008

Eruption dynamics at Mount St. Helens imaged from broadband seismic waveforms: Interaction of the shallow magmatic and hydrothermal systems

The current eruption at Mount St. Helens is characterized by dome building and shallow, repetitive, long-period (LP) earthquakes. Waveform cross-correlation reveals remarkable similarity for a majority of the earthquakes over periods of several weeks. Stacked spectra of these events display multiple peaks between 0.5 and 2 Hz that are common to most stations. Lower-amplitude very-long-period (VLP) events commonly accompany the LP events. We model the source mechanisms of LP and VLP events in the 0.5-4 s and 8-40 s bands, respectively, using data recorded in July 2005 with a 19-station temporary broadband network. The source mechanism of the LP events includes: 1) a volumetric component modeled as resonance of a gently NNW-dipping, steam-filled crack located directly beneath the actively extruding part of the new dome and within 100 m of the crater floor and 2) a vertical single force attributed to movement of the overlying dome. The VLP source, which also includes volumetric and single-force components, is 250 m deeper and NNW of the LP source, at the SW edge of the 1980s lava dome. The volumetric component points to the compression and expansion of a shallow, magma-filled sill, which is subparallel to the hydrothermal crack imaged at the LP source, coupled with a smaller component of expansion and compression of a dike. The single-force components are due to mass advection in the magma conduit. The location, geometry and timing of the sources suggest the VLP and LP events are caused by perturbations of a common crack system.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Physical property changes in hydrate-bearing sediment due to depressurization and subsequent repressurization

Physical property measurements of sediment cores containing natural gas hydrate are typically performed on material exposed, at least briefly, to non-in situ conditions during recovery. To examine the effects of a brief excursion from the gas-hydrate stability field, as can occur when pressure cores are transferred to pressurized storage vessels, we measured physical properties on laboratory-formed sand packs containing methane hydrate and methane pore gas. After depressurizing samples to atmospheric pressure, we repressurized them into the methane-hydrate stability field and remeasured their physical properties. Thermal conductivity, shear strength, acoustic compressional and shear wave amplitudes, and speeds of the original and depressurized/repressurized samples are compared. X– ray computed tomography images track how the gas-hydrate distribution changes in the hydrate-cemented sands owing to the depressurizaton/repressurization process. Because depressurization-induced property changes can be substantial and are not easily predicted, particularly in water-saturated, hydrate-bearing sediment, maintaining pressure and temperature conditions throughout the core recovery and measurement process is critical for using laboratory measurements to estimate in situ properties.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Improved tests reveal that the accelarating moment release hypothesis is statistically insignificant

We test the hypothesis that accelerating moment release (AMR) is a precursor to large earthquakes, using data from California, Nevada, and Sumatra. Spurious cases of AMR can arise from data fitting because the time period, area, and sometimes magnitude range analyzed before each main shock are often optimized to produce the strongest AMR signal. Optimizing the search criteria can identify apparent AMR even if no robust signal exists. For both 1950-2006 California-Nevada M ??? 6.5 earthquakes and the 2004 M9.3 Sumatra earthquake, we can find two contradictory patterns in the pre-main shock earthquakes by data fitting: AMR and decelerating moment release. We compare the apparent AMR found in the real data to the apparent AMR found in four types of synthetic catalogs with no inherent AMR. When spatiotemporal clustering is included in the simulations, similar AMR signals are found by data fitting in both the real and synthetic data sets even though the synthetic data sets contain no real AMR. These tests demonstrate that apparent AMR may arise from a combination of data fitting and normal foreshock and aftershock activity. In principle, data-fitting artifacts could be avoided if the free parameters were determined from scaling relationships between the duration and spatial extent of the AMR pattern and the magnitude of the earthquake that follows it. However, we demonstrate that previously proposed scaling relationships are unstable, statistical artifacts caused by the use of a minimum magnitude for the earthquake catalog that scales with the main shock magnitude. Some recent AMR studies have used spatial regions based on hypothetical stress loading patterns, rather than circles, to select the data. We show that previous tests were biased and that unbiased tests do not find this change to the method to be an improvement. The use of declustered catalogs has also been proposed to eliminate the effect of clustering but we demonstrate that this does not increase the statistical significance of AMR. Given the ease with which data fitting can find desired patterns in seismicity, future studies of AMR-like observations must include complete tests against synthetic catalogs that include spatiotemporal clustering.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Anatomy of the Chesapeake Bay impact structure revealed by seismic imaging, Delmarva Peninsula, Virginia, USA

A 30-km-long, radial seismic reflection and refraction survey completed across the northern part of the late Eocene Chesapeake Bay impact structure (CBIS) on the Delmarva Peninsula, Virginia, USA, confirms that the CBIS is a complex central-peak crater. We used a tomographic P wave velocity model and low-fold reflection images, constrained by data from two deep boreholes located on the profile, to interpret the structure and composition of the upper 5 km of crust. The seismic images exhibit well-defined structural features, including (with increasing radial distance) a collapsed central uplift, a breccia-filled moat, and a collapsed transient-crater margin (which collectively constitute a ???40-km-wide collapsed transient crater), and a shallowly deformed annular trough. These seismic images are the first to resolve the deep structure of the crater (>1 km) and the boundaries between the central uplift, moat, and annular trough. Several distinct seismic signatures distinguish breccia units from each other and from more coherent crystalline rocks below the central uplift, moat, and annular trough. Within the moat, breccia extends to a minimum depth of 1.5 km or a maximum of 3.5 km, depending upon the interpretation of the deepest layered materials. The images show ???350 to 500 m of postimpact sediments above the impactites. The imaged structure of the CBIS indicates a complex sequence of event during the cratering process that will provide new constraints for numerical modeling. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Constraining earthquake source inversions with GPS data: 1. Resolution-based removal of artifacts

We present a resolution analysis of an inversion of GPS data from the 2004 M w 6.0 Parkfield earthquake. This earthquake was recorded at thirteen 1-Hz GPS receivers, which provides for a truly coseismic data set that can be used to infer the static slip field. We find that the resolution of our inverted slip model is poor at depth and near the edges of the modeled fault plane that are far from GPS receivers. The spatial heterogeneity of the model resolution in the static field inversion leads to artifacts in poorly resolved areas of the fault plane. These artifacts look qualitatively similar to asperities commonly seen in the final slip models of earthquake source inversions, but in this inversion they are caused by a surplus of free parameters. The location of the artifacts depends on the station geometry and the assumed velocity structure. We demonstrate that a nonuniform gridding of model parameters on the fault can remove these artifacts from the inversion. We generate a nonuniform grid with a grid spacing that matches the local resolution length on the fault and show that it outperforms uniform grids, which either generate spurious structure in poorly resolved regions or lose recoverable information in well-resolved areas of the fault. In a synthetic test, the nonuniform grid correctly averages slip in poorly resolved areas of the fault while recovering small-scale structure near the surface. Finally, we present an inversion of the Parkfield GPS data set on the nonuniform grid and analyze the errors in the final model. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Observations and interpretation of fundamental mode Rayleigh wavefields recorded by the Transportable Array (USArray)

Broadband recordings of the dense Transportable Array (TA) in the western United States provide unparalleled detailed images of long-period seismic surface wavefields. With 400 stations spanning most of the western United States, wavefronts of fundamental mode Rayleigh waves may be visualized coherently across the array at periods ???40 s. In order to constrain the Rayleigh wave phase velocity structure in the western United States, I assemble a data set of vertical component seismograms from 53 teleseismic events recorded by the TA from April 2006 to October 2007. Complex amplitude spectra from these recordings at peni ods 27-100 s are interpreted using the multiplane wave tomographic method of Friederich and Wielandt (1995) and Pollitz (1999). This analysis yields detailed surface wave phase velocity and three-dimensional shear wave velocity patterns across the North American plate boundary zone, elucidating the active processes in the highly heterogeneous western U.S. upper mantle.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Implications of postseismic gravity change following the great 2004 Sumatra-Andaman earthquake from the regional harmonic analysis of GRACE intersatellite tracking data

We report Gravity Recovery and Climate Experiment (GRACE) satellite observations of coseismic displacements and postseismic transients from the great Sumatra-Andaman Islands (thrust event; Mw ???9.2) earthquake in December 2004. Instead of using global spherical harmonic solutions of monthly gravity fields, we estimated the gravity changes directly using intersatellite range-rate data with regionally concentrated spherical Slepian basis functions every 15-day interval. We found significant step-like (coseismic) and exponential-like (postseismic) behavior in the time series of estimated coefficients (from May 2003 to April 2007) for the spherical Slepian function's. After deriving coseismic slip estimates from seismic and geodetic data that spanned different time intervals, we estimated and evaluated postseismic relaxation mechanisms with alternate asthenosphere viscosity models. The large spatial coverage and uniform accuracy of our GRACE solution enabled us to clearly delineate a postseismic transient signal in the first 2 years of postearthquake GRACE data. Our preferred interpretation of the long-wavelength components of the postseismic avity change is biviscous viscoelastic flow. We estimated a transient viscosity of 5 ??17 Pa s and a steady state viscosity of 5 ?? 1018 - 1019 Pa s. Additional years of the GRACE observations should provide improved steady state viscosity estimates. In contrast to our interpretation of coseismic gravity change, the prominent postearthquake positive gravity change around the Nicobar Islands is accounted for by seafloor uplift with less postseismic perturbation in intrinsic density in the region surrounding the earthquake. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Postearthquake relaxation after the 2004 M6 Parkfield, California, earthquake and rate-and-state friction

An unusually complete set of measurements (including rapid rate GPS over the first 10 days) of postseismic deformation is available at 12 continuous GPS stations located close to the epicenter of the 2004 M6.0 Parkfield earthquake. The principal component modes for the relaxation of the ensemble of those 12 GPS stations were determined. The first mode alone furnishes an adequate approximation to the data. Thus, the relaxation at all stations can be represented by the product of a common temporal function and distinct amplitudes for each component (north or east) of relaxation at each station. The distribution in space of the amplitudes indicates that the relaxation is dominantly strike slip. The temporal function, which spans times from about 5 min to 900 days postearthquake, can be fit by a superposition of three creep terms, each of the form ??l loge(1 + t/??l), with characteristic times ??, = 4.06, 0.11, and 0.0001 days. It seems likely that what is actually involved is a broad spectrum of characteristic times, the individual components of which arise from afterslip on different fault patches. Perfettini and Avouac (2004) have shown that an individual creep term can be explained by the spring-slider model with rate-dependent (no state variable) friction. The observed temporal function can also be explained using a single spring-slider model (i.e., single fault patch) that includes rate-and-state-dependent friction, a single-state variable, and either of the two commonly used (aging and slip) state evolution laws. In the latter fits, the rate-and-state friction parameter b is negative.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Rocky Mountain evolution: Tying Continental Dynamics of the Rocky Mountains and Deep Probe seismic experiments with receiver functions

In this study, we have determined the crustal structure using three different receiver function methods using data collected from the northern transect of the Continental Dynamics of the Rocky Mountains (CD-ROM) experiment. The resulting migrated image and crustal thickness determinations confirm and refine prior crustal thickness measurements based on the CD-ROM and Deep Probe experiment data sets. The new results show a very distinct and thick lower crustal layer beneath the Archean Wyoming province. In addition, we are able to show its termination at 42??N latitude, which provides a seismic tie between the CD-ROM and Deep Probe seismic experiments and thus completes a continuous north-south transect extending from New Mexico into Alberta, Canada. This new tie is particularly important because it occurs close to a major tectonic boundary, the Cheyenne belt, between an Archean craton and a Proterozoic terrane. We used two different stacking techniques, based on a similar concept but using two different ways to estimate uncertainties. Furthermore, we used receiver function migration and common conversion point (CCP) stacking techniques. The combined interpretation of all our results shows (1) crustal thinning in southern Wyoming, (2) strong northward crustal thickening beginning in central Wyoming, (3) the presence of an unusually thick and high-velocity lower crust beneath the Wyoming province, and (4) the abrupt termination of this lower crustal layer north of the Cheyenne belt at 42??N latitude. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Constraining earthquake source inversions with GPS data: 2. A two-step approach to combine seismic and geodetic data sets

We present a new method to combine static and wavefield data to image earthquake ruptures. Our combined inversion is a two-step procedure, following the work of Hernandez et al. (1999), and takes into account the differences between the resolutions of the two data sets. The first step consists of an inversion of the static field, which yields a map of slip amplitude. This inversion exploits a special irregular grid that takes into account the resolution of the static data. The second step is an inversion of the radiated wavefield; it results in the determination of the time evolution of slip on the fault. In the second step, the slip amplitude is constrained to resemble the static slip amplitude map inferred from the GPS inversion. Using this combined inversion, we study the source process of the 2004 M6 Parkfield, California, earthquake. We conclude that slip occurred in two main regions of the fault, each of which displayed distinct rupture behaviors. Slip initiated at the hypocenter with a very strong bilateral burst of energy. Here, slip was localized in a narrow area approximately 10 km long, the rupture velocity was very fast (???3.5 km/s), and slip only lasted a short period of time (<1 s). Then the rupture proceeded to a wider region 12-20 km northwest of the hypocenter. Here, the earthquake developed in a more moderated way: the rupture velocity slowed to ???3.0 km/s and slip lasted longer (1-2 s). The maximum slip amplitude was 0.45 m. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Premonitory acoustic emissions and stick-slip in natural and smooth-faulted Westerly granite

A stick-slip event was induced in a cylindrical sample of Westerly granite containing a preexisting natural fault by loading at constant confining pressure of 150 MPa. Continuously recorded acoustic emission (AE) data and computer tomography (CT)-generated images of the fault plane were combined to provide a detailed examination of microscale processes operating on the fault. The dynamic stick-slip event, considered to be a laboratory analog of an earthquake, generated an ultrasonic signal that was recorded as a large-amplitude AE event. First arrivals of this event were inverted to determine the nucleation site of slip, which is associated with a geometric asperity on the fault surface. CT images and AE locations suggest that a variety of asperities existed in the sample because of the intersection of branch or splay faults with the main fault. This experiment is compared with a stick-slip experiment on a sample prepared with a smooth, artificial saw-cut fault surface. Nearly a thousand times more AE were observed for the natural fault, which has a higher friction coefficient (0.78 compared to 0.53) and larger shear stress drop (140 compared to 68 MPa). However at the measured resolution, the ultrasonic signal emitted during slip initiation does not vary significantly between the two experiments, suggesting a similar dynamic rupture process. We propose that the natural faulted sample under triaxial compression provides a good laboratory analogue for a field-scale fault system in terms of the presence of asperities, fault surface heterogeneity, and interaction of branching faults. ?? 2009.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Regional three-dimensional seismic velocity model of the crust and uppermost mantle of northern California

We present a three-dimensional (3D) tomographic model of the P wave velocity (Vp) structure of northern California. We employed a regional-scale double-difference tomography algorithm that incorporates a finite-difference travel time calculator and spatial smoothing constraints. Arrival times from earthquakes and travel times from controlled-source explosions, recorded at network and/or temporary stations, were inverted for Vp on a 3D grid with horizontal node spacing of 10 to 20 km and vertical node spacing of 3 to 8 km. Our model provides an unprecedented, comprehensive view of the regional-scale structure of northern California, putting many previously identified features into a broader regional context and improving the resolution of a number of them and revealing a number of new features, especially in the middle and lower crust, that have never before been reported. Examples of the former include the complex subducting Gorda slab, a steep, deeply penetrating fault beneath the Sacramento River Delta, crustal low-velocity zones beneath Geysers-Clear Lake and Long Valley, and the high-velocity ophiolite body underlying the Great Valley. Examples of the latter include mid-crustal low-velocity zones beneath Mount Shasta and north of Lake Tahoe. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Inducing in situ, nonlinear soil response applying an active source

[1] It is well known that soil sites have a profound effect on ground motion during large earthquakes. The complex structure of soil deposits and the highly nonlinear constitutive behavior of soils largely control nonlinear site response at soil sites. Measurements of nonlinear soil response under natural conditions are critical to advancing our understanding of soil behavior during earthquakes. Many factors limit the use of earthquake observations to estimate nonlinear site response such that quantitative characterization of nonlinear behavior relies almost exclusively on laboratory experiments and modeling of wave propagation. Here we introduce a new method for in situ characterization of the nonlinear behavior of a natural soil formation using measurements obtained immediately adjacent to a large vibrator source. To our knowledge, we are the first group to propose and test such an approach. Employing a large, surface vibrator as a source, we measure the nonlinear behavior of the soil by incrementally increasing the source amplitude over a range of frequencies and monitoring changes in the output spectra. We apply a homodyne algorithm for measuring spectral amplitudes, which provides robust signal-to-noise ratios at the frequencies of interest. Spectral ratios are computed between the receivers and the source as well as receiver pairs located in an array adjacent to the source, providing the means to separate source and near-source nonlinearity from pervasive nonlinearity in the soil column. We find clear evidence of nonlinearity in significant decreases in the frequency of peak spectral ratios, corresponding to material softening with amplitude, observed across the array as the source amplitude is increased. The observed peak shifts are consistent with laboratory measurements of soil nonlinearity. Our results provide constraints for future numerical modeling studies of strong ground motion during earthquakes.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Tracking magma volume recovery at Okmok Volcano using GPS and an unscented kalman filter

Changes beneath a volcano can be observed through position changes in a GPS network, but distinguishing the source of site motion is not always straightforward. The records of continuous GPS sites provide a favorable data set for tracking magma migration. Dense campaign observations usually provide a better spatial picture of the overall deformation field, at the expense of an episodic temporal record. Combining these observations provides the best of both worlds. A Kalman filter provides a means for integrating discrete and continuous measurements and for interpreting subtle signals. The unscented Kalman filter (UKF) is a nonlinear method for time‐dependent observations. We demonstrate the application of this technique to deformation data by applying it to GPS data collected at Okmok volcano. Seven years of GPS observations at Okmok are analyzed using a Mogi source model and the UKF. The deformation source at Okmok is relatively stable at 2.5 km depth below sea level, located beneath the center of the caldera, which means the surface deformation is caused by changes in the strength of the source. During the 7 years of GPS observations more than 0.5 m of uplift has occurred, a majority of that during the time period January 2003 to July 2004. The total volume recovery at Okmok since the last eruption in 1997 is ∼60–80%. The UKF allows us to solve simultaneously for the time‐dependence of the source strength and for the location without a priori information about the source. 2009 by the American Geophysical Union.

Alaska↗
USGS2009

Seismic wave triggering of nonvolcanic tremor, episodic tremor and slip, and earthquakes on Vancouver Island

[1] We explore the physical conditions that enable triggering of nonvolcanic tremor and earthquakes by considering local seismic activity on Vancouver Island, British Columbia during and immediately after the arrival of large-amplitude seismic waves from 30 teleseismic and 17 regional or local earthquakes. We identify tremor triggered by four of the teleseismic earthquakes. The close temporal and spatial proximity of triggered tremor to ambient tremor and aseismic slip indicates that when a fault is close to or undergoing failure, it is particularly susceptible to triggering of further events. The amplitude of the triggering waves also influences the likelihood of triggering both tremor and earthquakes such that large amplitude waves triggered tremor in the absence of detectable aseismic slip or ambient tremor. Tremor and energy radiated from regional/local earthquakes share the same frequency passband so that tremor cannot be identified during these smaller, more frequent events. We confidently identify triggered local earthquakes following only one teleseism, that with the largest amplitude, and four regional or local events that generated vigorous aftershock sequences in their immediate vicinity. Earthquakes tend to be triggered in regions different from tremor and with high ambient seismicity rates. We also note an interesting possible correlation between large teleseismic events and episodic tremor and slip (ETS) episodes, whereby ETS events that are “late” and have built up more stress than normal are susceptible to triggering by the slight nudge of the shaking from a large, distant event, while ETS events that are “early” or “on time” are not.

Vancouver Island↗
USGS2009

Volcano-tectonic implications of 3-D velocity structures derived from joint active and passive source tomography of the island of Hawaii

We present a velocity model of the onshore and offshore regions around the southern part of the island of Hawaii, including southern Mauna Kea, southeastern Hualalai, and the active volcanoes of Mauna Loa, and Kilauea, and Loihi seamount. The velocity model was inverted from about 200,000 first-arrival traveltime picks of earthquakes and air gun shots recorded at the Hawaiian Volcano Observatory (HVO). Reconstructed volcanic structures of the island provide us with an improved understanding of the volcano-tectonic evolution of Hawaiian volcanoes and their interactions. The summits and upper rift zones of the active volcanoes are characterized by high-velocity materials, correlated with intrusive magma cumulates. These high-velocity materials often do not extend the full lengths of the rift zones, suggesting that rift zone intrusions may be spatially limited. Seismicity tends to be localized seaward of the most active intrusive bodies. Low-velocity materials beneath parts of the active rift zones of Kilauea and Mauna Loa suggest discontinuous rift zone intrusives, possibly due to the presence of a preexisting volcanic edifice, e.g., along Mauna Loa beneath Kilauea's southwest rift zone, or alternatively, removal of high-velocity materials by large-scale landsliding, e.g., along Mauna Loa's western flank. Both locations also show increased seismicity that may result from edifice interactions or reactivation of buried faults. New high-velocity regions are recognized and suggest the presence of buried, and in some cases, previously unknown rift zones, within the northwest flank of Mauna Loa, and the south flanks of Mauna Loa, Hualalai, and Mauna Kea. Copyright 2009 by the American Geophysical Union.

Hawaii↗
USGS2008

Seismicity and deformation induced by magma accumulation at three basaltic volcanoes

We analyzed the evolution of volcano‐tectonic (VT) seismicity and deformation at three basaltic volcanoes (Kilauea, Mauna Loa, Piton de la Fournaise) during phases of magma accumulation. We observed that the VT earthquake activity displays an accelerating evolution at the three studied volcanoes during the time of magma accumulation. At the same times, deformation rates recorded at the summit of Kilauea and Mauna Loa volcanoes were not accelerating but rather tend to decay. To interpret these observations, we propose a physical model describing the evolution of pressure produced by the accumulation of magma into a reservoir. This variation of pressure is then used to force a simple model of damage, where damage episodes are equivalent to earthquakes. This model leads to an exponential increase of the VT activity and to an exponential decay of the deformation rate during accumulation phases. Seismicity and deformation data are well fitted by such an exponential model. The time constant, deduced from the exponential increase of the seismicity, is in agreement with the time constant predicted by the model of magma accumulation. This VT activity can thus be a direct indication of the accumulation of magma at depth, and therefore can be seen as a long‐term precursory phenomenon, at least for the three studied basaltic volcanoes. Unfortunately, it does not allow the prediction of the onset of future eruptions, as no diverging point (i.e., critical time) is present in the model.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Postseismic relaxation following the 1992 M7.3 Landers and 1999 M7.1 Hector Mine earthquakes, southern California

Postseismic relaxation (measured postseismic deformation less the deformation that would have occurred at the preseismic rate) has been monitored at the same 10 monuments over ???6 years following both the 1992 Landers and the 1999 Hector Mine earthquakes. For both earthquakes the displacement components of the observed relaxation are well described by ?? i + ?? i f 1 (t), where ?? i and ?? i are constants peculiar to each component at each monument, t is the time after the earthquake, and f 1 (t) is a temporal function common to all components and all monuments for that earthquake. The temporal fanction f 1 (t) can be approximated by bt + c log e (1 + t /??), where ?? = 38.7 ?? 15.2 days and 25.6 ?? 7.7 days for the Landers and Hector Mine relaxations, respectively. Because the estimated values of ?? do not differ significantly, the transient term log e (1 + t/??) in the temporal function may be the same for both earthquakes. The asymptotic (t ??? ???) relaxation rates ?? i b are only a few mm/a and do not appear to be significantly different following the two earthquakes. The asymptotic deformation rates appear to be slightly greater than the preseismic deformation rates, but the preseismic rates were not measured directly. Thus, the deformations of the Landers array measured over the first 5.6 years following the Landers earthquake and over the first 6.4 years following the Hector Mine earthquake are generally consistent with a simple model in which the transient postearthquake relaxation depends upon time as log e (1 + t/??) with ?? = 28 ?? 5 days and the asymptotic postseismic speeds of the monuments exceed the preseismic speeds by at most only a few millimeters per annum.

Journal of Geophysical Research B: Solid Earth↗