SEARCH · USGS Science

Results for “Acoustics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

USGS2025

Ultrasonic deterrents provide no additional benefit over curtailment in reducing bat fatalities at an Ohio wind energy facility

Wind energy is important for achieving net-zero greenhouse gas emissions but also contributes to global bat mortality. Current strategies to minimize bat mortality due to collision with wind-turbine blades fall broadly into two categories: curtailment (limiting turbine operation during high-risk periods) and deterrence (discouraging bat activity near turbines). Recently, there has been interest in combining these strategies to achieve greater reductions in bat fatalities than either strategy might achieve in isolation. To investigate the effectiveness of combining curtailment with ultrasonic deterrent minimization strategies, we deployed six ultrasonic deterrents at nacelle height on 16 experimental turbines at Avangrid Renewables’ Blue Creek Wind Energy Facility. We rotated between four conditions (normal operations, curtailment only, deterrent only, curtailment and deterrent) randomly assigned to four wind turbines each night between 15 June and 3 October 2017. We found that bat mortality at wind turbines was independent of wind speed. The effectiveness of ultrasonic acoustic deterrents varied between high-frequency-calling species (eastern red bats) and low-frequency-calling species (hoary bats, silver-haired bats, and big brown bats). When deterrents were active, mortality was twice as high for eastern red bats compared to the control. Conversely, deterrents had a weak dampening effect on bat mortality for low-frequency species. We found no additive effects on mortality reduction for turbines operating both curtailment and deterrents compared to either approach in isolation. Our findings suggest that ultrasonic acoustic deterrents may not be effective for both high and low frequency echolocating bats. The increase in fatalities of eastern red bats is alarming and underscores the importance of considering site- and species-specific effects of minimization solutions.

Ohio↗

USGS2016

Anadromous salmonids in the Delta: New science 2006–2016

As juvenile salmon enter the Sacramento–SanJoaquin River Delta (“the Delta”) they disperse among its complex channel network where they are subject to channel-specific processes that affect their rate of migration, vulnerability to predation, feeding success, growth rates, and ultimately, survival. In the decades before 2006, tools available to quantify growth, dispersal, and survival of juvenile salmon in this complex channel network were limited.Fortunately, thanks to technological advances such as acoustic telemetry and chemical and structural otolith analysis, much has been learned over the past decade about the role of the Delta in the life cycle of juvenile salmon. Here, we review new science between 2006and 2016 that sheds light on how different life stages and runs of juvenile salmon grow, move, and survive in the complex channel network of the Delta. One of the most important advances during the past decade has been the widespread adoption of acoustic telemetry techniques. Use of telemetry has shed light on how survival varies among alternative migration routes and the proportion of fish that use each migration route. Chemical and structural analysis of otoliths has provided insights about when juveniles left their natal river and provided evidence of extended rearing in the brackish or saltwater regions of the Delta. New advancements in genetics now allow individuals captured by trawls to be assigned to specific runs. Detailed information about movement and survival in the Delta has spurred development of agent-based models of juvenile salmon that are coupled to hydrodynamic models. Although much has been learned, knowledge gaps remain about how very small juvenile salmon (fry and parr) use the Delta. Understanding how all life stages of juvenile salmon grow, rear, and survive in the Delta is critical for devising management strategies that support a diversity of life history strategies.

California↗

USGS2020

Combining models of the critical streakline and the cross-sectional distribution of juvenile salmon to predict fish routing at river junctions

Because fish that enter the interior Delta have poorer survival than those emigrating via the Sacramento River, understanding the mechanisms that drive entrainment rates at side channel junctions is critically important for the management of imperiled juvenile salmon. Here, we implement a previously proposed process-based conceptual model to study entrainment rates based on three linked elements: the entrainment zone, critical streakline, and cross-sectional distribution of fish. The critical streakline is the location along a channel cross-section immediately upstream of a junction that forms the spatial divide between parcels of water that enter a side channel or remain in the main channel. The critical streakline therefore divides the main channel into entrainment zones within which fish would likely enter each channel. Combined with information about the cross-sectional distribution of fish upstream of a junction, this conceptual model provides a means to predict fish entrainment into each channel. To apply this conceptual model, we combined statistical models of the critical streakline, the cross-sectional distribution of acoustic tagged juvenile Chinook salmon, and their probability of entrainment into Georgiana Slough. We fit joint beta regression and logistic regression models to acoustic telemetry data gathered in 2011 and 2012 to estimate the cross-sectional distribution of fish upstream of the junction, and to estimate the probability of entrainment for fish on either side of the critical streakline. We show that entrainment rates can be predicted by understanding how the combination of critical streakline position and cross-sectional distribution of fish co-vary as a function of environmental covariates. By integrating over individual positions and entrainment fates to arrive at population-level entrain probability in relation to environmental covariates, our model offers managers a simple but powerful tool to evaluate how alternative actions affect migrating fish.

California↗

USGS2026

Assessment of Chinook Salmon smolt survival at offsite release locations in the Sacramento River across wet and dry years

We used acoustic telemetry to estimate survival of tagged release groups, and quantify differences between alternative hatchery release strategies. To assess whether offsite release could increase survival of hatchery fish relative to those released at the hatchery, we compare survival during emigration of hatchery fall Chinook Salmon (FCS, Oncorhynchus tshawytscha ) smolts released onsite, at Coleman National Fish Hatchery (NFH), to those released at alternative offsite locations downstream in the upper Sacramento River, California. Approximately 300 fish in each release group were implanted with acoustic tags in the 3-year study during 2019, 2021, and 2022. Environmental conditions in the emigration corridor varied between study years, with extended high flows in 2019, whereas drought conditions and a flat hydrograph occurred in 2021 and 2022. Survival across years appeared to reflect environmental conditions, with higher overall survival seen in 2019. Survival differences between release sites generally showed higher cumulative survival to Knights Landing or Chipps Island for the downstream release groups, compared to the onsite releases during 2021 and 2022. This information suggests hatchery releases of FCS from Coleman NFH at downstream release sites may benefit emigration survival during years of drought and sub-optimal in-river conditions, compared to standard onsite releases. Hatchery managers can use information from this study to diversify the portfolio of release strategies, which may be useful to buffer against extreme variations of adult abundance by spreading risks across space and time. Ultimately, offsite releases may be a useful tool for adaptive management of these culturally, ecologically, and economically important salmon populations.

California↗

USGS2026

Differences among runs of Chinook Salmon in routing probability at the Georgiana Slough-Sacramento River junction

The survival of juvenile Chinook Salmon ( Oncorhynchus tshawytscha ) depends on the specific migration route they take through the Sacramento–San Joaquin Delta. Factors such as flow magnitude, flow direction, and distribution of fish across the channel significantly affect the likelihood of their entering routes with lower survival probabilities. Management strategies to mitigate the entry of endangered winter-run and threatened spring-run Chinook Salmon into the interior Delta—particularly through Georgiana Slough—involve flow regulation and the installation of a bioacoustic fish fence. Monitoring the effectiveness of these measures has primarily relied on acoustically-tagged, juvenile, hatchery-reared, late-fall-run Chinook Salmon, which are easier to obtain and can accommodate larger tags compared to other runs. Previous studies explored how flow dynamics affect routing probabilities of late-fall-run Chinook Salmon, but there is a lack of understanding about how routing probabilities vary among runs. We leveraged data from 15 previous studies comprising 3,004 acoustically-tagged fish across all four runs, over a 12-year period, to assess the effects of run on routing probability into Georgiana Slough, while accounting for variation in flow dynamics. We employed logistic regression to model the influence of tidal flow metrics, time of day (day and night), and run type on the probability of juvenile Chinook Salmon being routed into Georgiana Slough. Our analysis revealed that reverse flow during incoming tides influenced the routing probabilities of all runs. An increased proportion of flow into Georgiana Slough, meant an increased probability for all runs to be routed into Georgiana Slough. Late-fall-run Chinook Salmon also showed a greater probability of routing into Georgiana Slough during the night than during the day, whereas the opposite was true for other runs. These differences in routing probability affect our understanding of how management actions intended to reduce routing into Georgiana Slough may differentially affect the four runs of Chinook Salmon in the Sacramento River.

Callifornia↗

USGS2004

Imaging fall Chinook salmon redds in the Columbia River with a dual-frequency identification sonar

We tested the efficacy of a dual-frequency identification sonar (DIDSON) for imaging and enumeration of fall Chinook salmon Oncorhynchus tshawytscha redds in a spawning area below Bonneville Dam on the Columbia River. The DIDSON uses sound to form near-video-quality images and has the advantages of imaging in zero-visibility water and possessing a greater detection range and field of view than underwater video cameras. We suspected that the large size and distinct morphology of a fall Chinook salmon redd would facilitate acoustic imaging if the DIDSON was towed near the river bottom so as to cast an acoustic shadow from the tailspill over the redd pocket. We tested this idea by observing 22 different redds with an underwater video camera, spatially referencing their locations, and then navigating to them while imaging them with the DIDSON. All 22 redds were successfully imaged with the DIDSON. We subsequently conducted redd searches along transects to compare the number of redds imaged by the DIDSON with the number observed using an underwater video camera. We counted 117 redds with the DIDSON and 81 redds with the underwater video camera. Only one of the redds observed with the underwater video camera was not also documented by the DIDSON. In spite of the DIDSON's high cost, it may serve as a useful tool for enumerating fall Chinook salmon redds in conditions that are not conducive to underwater videography.

North American Journal of Fisheries Management↗

USGS2011

Evaluation of methods to estimate lake herring spawner abundance in Lake Superior

Historically, commercial fishers harvested Lake Superior lake herring Coregonus artedi for their flesh, but recently operators have targeted lake herring for roe. Because no surveys have estimated spawning female abundance, direct estimates of fishing mortality are lacking. The primary objective of this study was to determine the feasibility of using acoustic techniques in combination with midwater trawling to estimate spawning female lake herring densities in a Lake Superior statistical grid (i.e., a 10′ latitude × 10′ longitude area over which annual commercial harvest statistics are compiled). Midwater trawling showed that mature female lake herring were largely pelagic during the night in late November, accounting for 94.5% of all fish caught exceeding 250 mm total length. When calculating acoustic estimates of mature female lake herring, we excluded backscattering from smaller pelagic fishes like immature lake herring and rainbow smelt Osmerus mordax by applying an empirically derived threshold of −35.6 dB. We estimated the average density of mature females in statistical grid 1409 at 13.3 fish/ha and the total number of spawning females at 227,600 (95% confidence interval = 172,500–282,700). Using information on mature female densities, size structure, and fecundity, we estimate that females deposited 3.027 billion (10 9 ) eggs in grid 1409 (95% confidence interval = 2.356–3.778 billion). The relative estimation error of the mature female density estimate derived using a geostatistical model—based approach was low (12.3%), suggesting that the employed method was robust. Fishing mortality rates of all mature females and their eggs were estimated at 2.3% and 3.8%, respectively. The techniques described for enumerating spawning female lake herring could be used to develop a more accurate stock–recruitment model for Lake Superior lake herring.

Transactions of the American Fisheries Society↗

USGS2023

Introduction to the special section on seismoacoustics and seismoacoustic data fusion

A variety of geophysical hazards (e.g., volcanic activity, earthquakes, mass movements, marine storms, bolides) and anthropogenic sources (e.g., chemical and nuclear explosions, mining blasts, rocket launches) can release energy as mechanical waves in the ground, ocean, and atmosphere (Arrowsmith et al., 2010; Campus and Christie, 2009). Due to the mechanical coupling between a planetary body, its ocean, and its atmosphere, waves can propagate across these interfaces (Ben-Menahem and Singh, 1981) and carry information about the source and the media they propagated through. The field of seismoacoustics, driven by geophysical observations of both seismic and low-frequency acoustic (infrasound) waves, has several interdisciplinary applications. Observations of both seismic and infrasonic waves can be used to discriminate between atmospheric and subsurface events, such as sonic booms and earthquakes. Moreover, seismoacoustic analyses can provide useful information for the source characterization of shallow anthropogenic events, such as underground or surface explosions, volcanic, and tectonic events (e.g., Arrowsmith et al., 2020; Assink et al., 2016; de Groot-Hedlin and Hedlin, 2019; Matoza et al., 2009). Similarly, remote observations (e.g., on regional seismic and infrasonic arrays) can help monitor natural events such as volcanic eruptions and provide additional details about eruption dynamics. Recent works additionally suggest that infrasound can be used to discriminate between different volcanic processes (Watson et al., 2022). Finally, looking outwards, the study of seismo-acoustics has been a particularly valuable tool for planetary science (e.g., Krishnamoorthy et al., 2018; Martire et al., 2018; Krishnamoorthy et al., 2019; Martire et al., 2020; Garcia et al., 2020; Brissaud et al., 2021).

Bulletin of the Seismological Society of America↗

USGS2016

Evaluating harvest-based control of invasive fish with telemetry: Performance of sea lamprey traps in the Great Lakes

Physical removal (e.g., harvest via traps or nets) of mature individuals may be a cost-effective or socially acceptable alternative to chemical control strategies for invasive species, but requires knowledge of the spatial distribution of a population over time. We used acoustic telemetry to determine the current and possible future role of traps to control and assess invasive sea lampreys, Petromyzon marinus , in the St. Marys River, the connecting channel between Lake Superior and Lake Huron. Exploitation rates (i.e., fractions of an adult sea lamprey population removed by traps) at two upstream locations were compared among three years and two points of entry to the system. Telemetry receivers throughout the drainage allowed trap performance (exploitation rate) to be partitioned into two components: proportion of migrating sea lampreys that visited trap sites (availability) and proportion of available sea lampreys that were caught by traps (local trap efficiency). Estimated exploitation rates were well below those needed to provide population control in the absence of lampricides and were limited by availability and local trap efficiency. Local trap efficiency estimates for acoustic-tagged sea lampreys were lower than analogous estimates regularly obtained using traditional mark–recapture methods, suggesting that abundance had been previously underestimated. Results suggested major changes would be required to substantially increase catch, including improvements to existing traps, installation of new traps, or other modifications to attract and retain more sea lampreys. This case study also shows how bias associated with telemetry tags can be estimated and incorporated in models to improve inferences about parameters that are directly relevant to fishery management.

Ecological Applications↗

USGS2004

Physical properties and rock physics models of sediment containing natural and laboratory-formed methane gas hydrate

This paper presents results of shear strength and acoustic velocity (p-wave) measurements performed on: (1) samples containing natural gas hydrate from the Mallik 2L-38 well, Mackenzie Delta, Northwest Territories; (2) reconstituted Ottawa sand samples containing methane gas hydrate formed in the laboratory; and (3) ice-bearing sands. These measurements show that hydrate increases shear strength and p-wave velocity in natural and reconstituted samples. The proportion of this increase depends on (1) the amount and distribution of hydrate present, (2) differences, in sediment properties, and (3) differences in test conditions. Stress-strain curves from the Mallik samples suggest that natural gas hydrate does not cement sediment grains. However, stress-strain curves from the Ottawa sand (containing laboratory-formed gas hydrate) do imply cementation is present. Acoustically, rock physics modeling shows that gas hydrate does not cement grains of natural Mackenzie Delta sediment. Natural gas hydrates are best modeled as part of the sediment frame. This finding is in contrast with direct observations and results of Ottawa sand containing laboratory-formed hydrate, which was found to cement grains (Waite et al. 2004). It therefore appears that the microscopic distribution of gas hydrates in sediment, and hence the effect of gas hydrate on sediment physical properties, differs between natural deposits and laboratory-formed samples. This difference may possibly be caused by the location of water molecules that are available to form hydrate. Models that use laboratory-derived properties to predict behavior of natural gas hydrate must account for these differences.

American Mineralogist↗

USGS1991

Seismic stratigraphy and structure of Prydz Bay, Antarctica: Implications from Leg 119 drilling

Prydz Bay is situated on the MacRobertson Land coast of East Antarctica at the seaward end of a 700-km-long transverse rift zone, the Lambert Rift. New and reprocessed seismic reflection data are combined with drilling results from five Leg 119 sites across Prydz Bay to study the regional stratigraphy and structure of the continental shelf and upper slope. Severe seismic multiples hamper interpretations, yet seven acoustic units separated by unconformities can be distinguished regionally. Only four units (sedimentary) have been drilled. More than 5 km of well- to poorly-stratified units beneath the inner shelf fill the northeast-trending Prydz Bay basin, which is related to, but separated from, the Lambert Graben. Basinal units overlie metamorphic basement (unit PS.5) and are continental nonmarine deposits of possible late Paleozoic to early Mesozoic age (unit PS.4, Site 740) and Early Cretaceous and younger(?) age (unit PS.2B, Site 741). Seaward, the basin is flanked by a buried and intruded(?) basement ridge (units PS.5 and PS.6). Continuous to distorted reflections cover the ridge and dip seaward in a prograding unit (unit PS.2A) beneath the outer shelf. Glaciomarine rocks of late Eocene to early Oligocene age comprise the innermost part of the unit PS.2A (Sites 742 and 739) and Holocene glacial rocks the outermost (Site 743); ages of intermediate parts of the unit are unknown. A flatlying unit of chaotic to continuous reflectors directly beneath the seafloor covers most of the northeast shelf (unit PS. 1, Sites 740, 741, 742, and 739), and is composed of compacted glacial diamictites of late Miocene and younger age. We suspect that significant rifting and glacial events have caused acoustic disconformities beneath Prydz Bay. The principal rifting events began with earliest rifting of Gondwana in late Paleozoic time (units PS.5 to PS.4) and culminated with continental breakup in Early Cretaceous time (units PS.4 to PS.2B). The advent of East Antarctic glaciation in late Eocene to early Oligocene time (units PS.2B to PS.2A) and the grounding of ice sheets across the shelf in midand late-Cenozoic times (unit PS.l to underlying units) created the principal glacial disconformities. The seaward-prograding glacial sequences beneath the outermost shelf record numerous post-early Oligocene glacial events and likely sea-level changes that can only be partially mapped with existing seismic and drilling data.

Conference Paper↗

USGS2008

Multibeam Sonar Mapping and Modeling of a Submerged Bryophyte Mat in Crater Lake, Oregon

Traditionally, multibeam data have been used to map sea floor or lake floor morphology as well as the distribution of surficial facies in order to characterize the geologic component of benthic habitats. In addition to using multibeam data for geologic studies, we want to determine if these data can also be used directly to map the distribution of biota. Multibeam bathymetry and acoustic backscatter data collected in Crater Lake, Oregon, in 2000 are used to map the distribution of a deep-water bryophyte mat, which will be extremely useful for understanding the overall ecology of the lake. To map the bryophyte's distribution, depth range, acoustic backscatter intensity, and derived bathymetric index grids are used as inputs into a hierarchical decision-tree classification model. Observations of the bryophyte mat from over 23 line kilometers of lake-floor video collected in the summer of 2006 are used as controls for the model. The resulting map matches well with ground-truth information and shows that the bryophyte mat covers most of the platform surrounding Wizard Island as well as on outcrops around the caldera wall.

Data Series↗

USGS2001

2000 Multibeam sonar survey of Crater Lake, Oregon - Data, GIS, images, and movies

In the summer of 2000, the U.S. Geological Survey, Pacific Seafloor Mapping Project in cooperation with the National Park Service, and the Center for Coastal and Ocean Mapping, University of New Hampshire used a state-of-the-art multibeam sonar system to collect high-resolution bathymetry and calibrated, co-registered acoustic backscatter to support both biological and geological research in the Crater Lake area. This interactive CD-ROM contains the multibeam bathymetry and acoustic backscatter data, along with an ESRI ArcExplorer project (and software), images, and movies.

Oregon↗

USGS2012

Archive of digital chirp subbottom profile data collected during USGS cruise 10BIM04 offshore Cat Island, Mississippi, September 2010

In September of 2010, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE), conducted a geophysical survey to investigate the geologic controls on barrier island framework of Cat Island, Miss., as part of a broader USGS study on Barrier Island Mapping (BIM). These surveys were funded through the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project as part of the Holocene Coastal Evolution of the Mississippi-Alabama Region Subtask. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 10BIM04 tells us the data were collected in 2010 during the fourth field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID). All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-512i system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy; it was housed within a float system (built at the SPCMSC), which allows the towfish to be towed at a constant depth of 1.07 meters (m) below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, some energy is reflected back toward the transducer, received, and recorded by a Personal Computer (PC)-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)), and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in American Standard Code for Information Interchange (ASCII) format instead of Extended Binary Coded Decimal Interchange Code (EBCDIC) format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software, and they can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software.

Mississippi↗

USGS2014

Archive of digital chirp subbottom profile data collected during USGS cruise 12BIM03 offshore of the Chandeleur Islands, Louisiana, July 2012

From July 23 - 31, 2012, the U.S. Geological Survey conducted geophysical surveys to investigate the geologic controls on barrier island framework and long-term sediment transport along the oil spill mitigation sand berm constructed at the north end and just offshore of the Chandeleur Islands, La. (figure 1). This effort is part of a broader USGS study, which seeks to better understand barrier island evolution over medium time scales (months to years). This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Abbreviations page for expansions of acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 12BIM03 tells us the data were collected in 2012 during the third field activity for that project in that calendar year and BIM is a generic code, which represents efforts related to Barrier Island Mapping. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-424 system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy and is typically towed 1 - 2 m below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, energy is reflected back toward the transducer, received, and recorded by a PC-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)) and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 2 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in ASCII format instead of EBCDIC format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The web version of this archive does not contain the SEG Y trace files. These files are very large and would require extremely long download times. To obtain the complete DVD archive, contact USGS Information Services at 1-888-ASK-USGS or infoservices@usgs.gov. The printable profiles provided here are GIF images that were processed and gained using SU software and can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software. Detailed information about the navigation system used can be found in table 1 and the Field Activity Collection System (FACS) logs. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page.

Louisiana↗

USGS2008

Hydroacoustic Applications in South Carolina: Technological Advancements in the Streamgaging Network

Until the 1990s, the U.S. Geological Survey (USGS) had been making streamflow measurements using the same type of equipment for more than 100 years. The Price AA current meter was developed by USGS engineers in 1896. Until recently, the majority of all streamflow measurements made by the USGS were made using this instrument. In the mid-1990s, a new technology emerged in the field of inland streamflow monitoring. The acoustic Doppler current profiler (ADCP), originally developed for oceanographic work, was adapted for inland streamflow measurements. This instrument is transforming the USGS streamgaging program. The ADCP transmits an acoustic pulse through the water column. A 'Doppler shift' is measured as the signal is reflected off of particles in the water, such as sediment and microorganisms. Based on the assumption that the particles in the water are traveling at the same velocity as the water itself, a water velocity is computed.

South Carolina↗

USGS2003

Geophysical surveys of Bear Lake, Utah-Idaho, September, 2002

The U.S. Geological Survey, in cooperation with researchers from several universities, has been studying the sediments of Bear Lake since 1996. The general purpose of this effort is to reconstruct past limnological conditions and regional climate on a range of timescales, from hundreds of years to hundreds of thousands of years. The objectives of the September, 2002 operations, preliminarily reported here, were (1) to compile a detailed bathymetric map of the lake using swath-mapping techniques, in order to provide baseline data for a variety of applications and studies, and (2) to complete a sidescan-sonar survey of the lake, providing a nearly complete acoustic image of the lake floor. Limited amounts of subbottom acoustic-reflection data (chirp) were also collected, along with samples of lake-floor sediments representative of different kinds of backscatter patterns.

Idaho, Utah↗

USGS2003

Description of borehole geophysical and geologist logs, Berks Sand Pit Superfund Site, Longswamp Township, Berks County, Pennsylvania

Between October 2002 and January 2003, geophysical logging was conducted in six boreholes at the Berks Sand Pit Superfund Site, Longswamp Township, Berks County, Pa., to determine (1) the waterproducing zones, water-receiving zones, zones of vertical borehole flow, orientation of fractures, and borehole and casing depth; and (2) the hydraulic interconnection between the six boreholes and the site extraction well. The boreholes range in depth from 61 to 270 feet. Geophysical logging included collection of caliper, natural-gamma, single-point-resistance, fluid-temperature, fluid-flow, and acoustic-televiewer logs. Caliper and acoustic-televiewer logs were used to locate fractures, joints, and weathered zones. Inflections on fluid-temperature and single-point-resistance logs indicated possible water-bearing fractures, and flowmeter measurements verified these locations. Single-point-resistance, natural-gamma, and geologist logs provided information on stratigraphy. Flowmeter measurements were conducted while the site extraction well was pumping and when it was inactive to determine the hydraulic connections between the extraction well and the boreholes. Borehole geophysical logging and heatpulse flowmetering indicate active flow in the boreholes. Two of the boreholes are in ground-water discharge areas, two boreholes are in ground-water recharge areas, and one borehole is in an intermediate regime. Flow was not determined in one borehole. Heatpulse flowmetering, in conjunction with the geologist logs, indicates highly weathered zones in the granitic gneiss can be permeable and effective transmitters of water, confirming the presence of a two-tiered ground-water-flow system. The effort to determine a hydraulic connection between the site extraction well and six logged boreholes was not conclusive. Three boreholes showed decreases in depth to water after pumping of the site extraction well; in two boreholes, the depth to water increased. One borehole was cased its entire depth and was not revisited after it was logged by the caliper log. Substantial change in flow rates or direction of borehole flow was not observed in any of the three wells logged with the heatpulse flowmeter when the site extraction well was pumping and when it was inactive.

Open-File Report↗