USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water Resource Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,023 records · Page 36Linked to original sources
USGS2024

On-orbit calibration and performance of the EMIT imaging spectrometer

The Earth surface Mineral dust source InvesTigation (EMIT) is a remote visible to shortwave infrared (VSWIR) imaging spectrometer that has been operating onboard the International Space Station since July 2022. This article describes EMIT's on-orbit spectroradiometric calibration and validation. Accurate spectroscopy is vital to achieve consistent mapping results with orbital imaging spectrometers. EMIT takes a unique approach to this challenge, with just six optical elements, no shutter, and no onboard calibration systems. Its simple design focuses on uniformity and stability to enable vicarious spectroradiometric calibration. Our experiments demonstrate that this approach is successful, approaching the fidelity of manual field spectroscopy in some cases, and enabling new and more accurate products across diverse Earth science disciplines. EMIT achieves several notable firsts for an instrument of its class. It demonstrates successful on-orbit adjustments of Focal Plane Array (FPA) alignment with sub-micron precision. It offers spectral uniformity better than 98%. Optical artifacts in the measurement channels are at least three orders of magnitude below the primary solar-reflected surface signals. Its noise performance enables percent-level discrimination in the depths of mineral absorption features. In these aspects, EMIT satisfies the stringent performance needs for the next generation of VSWIR imaging spectrometers to observe the Earth's ecosystems, geology , and water resources.

Remote Sensing of Environment↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗
USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2024

Peak streamflow trends and their relation to changes in climate in Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin

Flood-frequency analysis, also called peak-flow frequency or flood-flow frequency analysis, is essential to water resources management applications including critical structure design and floodplain mapping. Federal guidelines for doing flood-frequency analyses are presented in a U.S. Geological Survey Techniques and Methods report known as Bulletin 17C. A basic assumption within Bulletin 17C is that for drainage basins without major hydrologic alterations, statistical properties of the distribution of annual peak streamflows (peak flows) are stationary; that is, the mean, variance, and skew are constant. The stationarity assumption has been widely accepted within the flood-frequency community; however, a better understanding of long-term climatic persistence and concerns about potential climate change and land-use change has caused a reexamination of the stationarity assumption. This work is part of that reexamination. The stationarity assumption is a concern because flood-frequency analyses that do not incorporate observed trends and abrupt changes may result in a poor representation of the true flood risk. Bulletin 17C does not offer guidance for incorporating nonstationarities when estimating floods, and it describes a need for studies that incorporate changing climate or basin characteristics. In response to this need and a history of concern regarding nonstationarity peak flows in the region, this study was done to assess potential nonstationarity in peak flows in the north-central United States. This report summarizes the methods used to detect hydroclimatic changes in peak-flow data in the study region. Four periods were selected for analysis of peak flow, daily streamflow, and climate data. The periods are (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. The starting point for these analyses was the initial data analysis of peak flow described in Bulletin 17C, which includes plotting the peak flow and checking for autocorrelation, monotonic trends, and changes points. Analyses were added to examine additional features in the data. Results are provided in a U.S. Geological Survey data release. The study limitations are documented for users of the results.

Scientific Investigations Report↗
USGS2025

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona↗
USGS2025

Metal fingerprints of Eocene rhyolite magmas coincident with Carlin-type gold deposition in Nevada USA

Eocene magmatic systems contemporaneous with world-class Carlin-type Au deposits in Nevada (USA) have been proposed by some researchers as a key ingredient for Au mineralization, though evidence conclusively demonstrating their genetic relationship remains tenuous. This study provides the first direct evidence of the pre-eruptive metal budget of volatile- and metal-charged silicic magmas coincident in time (~41 to 34 Ma) and space (within 5 km) with Carlin-type Au deposits. We characterize the pre-eruptive metal fingerprints of these diverse magmatic systems to assess their potential as sources of metals for Carlin-type Au mineralization. Metal abundances from quartz-hosted melt inclusions (Au, Te, Ag, Sb, Tl, Mo, W, Sn, As, Pb, Co, Cu, Ni, and Zn) characterized in situ by SHRIMP-RG and LA-ICP-MS represent our best (and only) estimates for the pre-eruptive metal budget in these systems. Median metal concentrations are generally within one order of magnitude of average upper crust and average continental rhyolite values. But there are two notable exceptions, with median Au contents extending >1 order of magnitude higher than average upper crust and median Cu contents ranging >1 order of magnitude lower than upper crust. Despite this, melts contain lower Au/Cu (<0.1), Au/Ag (<5), and Au/Tl (<0.3) than most ore-grade Carlin-type rock samples and quartz-hosted fluid inclusions, regardless of their age and timing relative to nearby Carlin-type Au mineralization. The metal fingerprints of these magmatic systems, de-fined both by traditional and multivariate compositional data analysis techniques, are distinct from one another. Yet none are particularly specialized, e.g., high Au/Cu, in terms of being ideal ingredients as postulated by magmatic models for Carlin-type Au mineralization. Magmatic Au contents do not appear to be correlated with rhyolite “flavors” in the way that Cu, Sn, and Nb contents are. Fluid/melt partitioning modeling and magma volume estimates support the idea that a diverse array of non-specialized silicic magmas could feasibly contribute some or potentially all of the Au, Ag, and Cu in Carlin-type systems. The compositional diversity among contemporaneous magmatic systems could possibly contribute to some of the diversity observed across Carlin-type Au districts in Nevada.

Nevada↗
USGS2026

Key minerals in energy transmission

The electrical grid relies on minerals with unique properties to transform, transmit, and convert electricity. Transmission needs are growing—to support the expansion of data centers and link diverse energy resources into the grid. This expansion will require greater quantities of minerals. Although some minerals are produced in the United States, the United States relies on imports for others. This infographic shows the key minerals that support energy transmission, and how reliant the United States is on imports for these minerals.

General Information Product↗
USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗
USGS2024

Deep-ocean macrofaunal assemblages on ferromanganese and phosphorite-rich substrates in the Southern California Borderland

Mineral-rich hardgrounds, such as ferromanganese (FeMn) crusts and phosphorites, occur on seamounts and continental margins, gaining attention for their resource potential due to their enrichment in valuable metals in some regions. This study focuses on the Southern California Borderland (SCB), an area characterized by uneven and heterogeneous topography featuring FeMn crusts, phosphorites, basalt, and sedimentary rocks that occur at varying depths and are exposed to a range of oxygen concentrations. Due to its heterogeneity, this region serves as an optimal setting for investigating the relationship between mineral-rich hardgrounds and benthic fauna. This study characterizes the density, diversity, and community composition of macrofauna (>300 μm) on hardgrounds as a function of substrate type and environment (depth and oxygen ranges). Rocks and their macrofauna were sampled quantitatively using remotely operated vehicles (ROVs) during expeditions in 2020 and 2021 at depths above, within, and below the oxygen minimum zone (OMZ). A total of 3,555 macrofauna individuals were counted and 416 different morphospecies (excluding encrusting bryozoans and hydrozoans) were identified from 82 rocks at depths between 231 and 2,688 m. Average density for SCB macrofauna was 11.08 ± 0.87 ind. 200 cm −2 and mean Shannon-Wiener diversity per rock (H′ [loge] ) was 2.22 ± 0.07. A relationship was found between substrate type and macrofaunal communities. Phosphorite rocks had the highest H′ of the four substrates compared on a per-rock basis. However, when samples were pooled by substrate, FeMn crusts had the highest H′ and rarefaction diversity. Of all the environmental variables examined, water depth explained the largest variance in macrofaunal community composition. Macrofaunal density and diversity values were similar at sites within and outside the OMZ. This study is the first to analyze the macrofaunal communities of mineral-rich hardgrounds in the SCB, which support deep-ocean biodiversity by acting as specialized substrates for macrofaunal communities. Understanding the intricate relationships between macrofaunal assemblages and mineral-rich substrates may inform effects from environmental disruptions associated with deep-seabed mining or climate change. The findings contribute baseline information useful for effective conservation and management of the SCB and will support scientists in monitoring changes in these communities due to environmental disturbance or human impact in the future.

California↗
USGS2026

Spatial variation in effectiveness and costs of sagebrush restoration treatments across the western United States

Natural resource managers strive to improve restoration efficiency across the vast network of public lands of the United States, seeking the best return on investment through innovation, geographic prioritization, and adaptive management. This challenge is exemplified by ecosystems dominated by sagebrush ( Artemisia spp.), which occur across the western United States and have been degraded by increasing wildfire frequency driven by invasive plant spread, among other factors. However, both costs and effectiveness of sagebrush restoration can vary spatially due to management practices in addition to biotic and abiotic factors, and characterizing this variation could inform broad-scale planning. We leveraged published models of sagebrush recovery and treatment costs to predict and evaluate cost-effectiveness of aerial and drill seeding Artemisia spp. across 429 718 km 2 that overlapped 12 US states. Compared to natural recovery, effectiveness for both methods was generally low, yet effectiveness was often greater, and costs were always greater, for drill than aerial seeding, resulting in slightly higher cost-effectiveness on average for drill seeding. Cost-effectiveness for both treatments increased near major roads and in areas with more repeated burns. Cost-effectiveness also increased with predisturbance cover of sagebrush but decreased with herbaceous cover. However, we also identified areas where aerial seeding was more cost-effective than drill seeding, particularly with greater slope. Our results provide spatially explicit estimates and potential mechanisms of cost-effectiveness for two common seeding methods for sagebrush, which can help prioritize limited resources, guide land use, and improve restoration efficiency and effectiveness across public rangelands of the western United States.

western United States↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries of select countries in the Indo-Pacific region

Introduction In 2024, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries of select countries in the Indo-Pacific." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of select countries in the Indo-Pacific region (area of study) and expand the NMIC's understanding on the impact of mineral industry of these countries in the global economy. The 19 countries of interest in the Indo-Pacific study area include Bangladesh, Bhutan, Brunei, Burma, Fiji, Malaysia, Mongolia, Nauru, New Caledonia, New Zealand, Papua New Guinea, Philippines, Singapore, Solomon Islands, South Korea (Republic of Korea), Sri Lanka, Taiwan, Timor-Leste, and Vietnam. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and production capacities across the Indo-Pacific study area as well as highlight mineral production and processing sites under development and potential areas of future extractive industry operations and development in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries of Select Countries in the Indo-Pacific." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within the select countries in the Indo-Pacific region.

Open-File Report↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗
USGS2026

Distributed volcanic fields—Patterns, products, processes, and plumbing

Distributed volcanic fields—also referred to as “monogenetic fields” or simply “volcanic fields”—are found on every continent, on the seafloors, and in every tectonic setting on Earth. Yet, our understanding of what constitutes a distributed volcanic field, and our knowledge of the common products, spatiotemporal patterns in activity, and plumbing systems of these fields, are commonly poor and (or) debated. Here we provide an overview of the current understanding of distributed volcanic fields (DVFs) through review and compilation of published data, with an emphasis on understanding the characteristics of fields that are essential to prepare for future hazardous volcanic activity. Distributed fields can erupt restricted to variable magma compositions. Activity in these fields produces nearly all types of volcanoes, including scoria and spatter cones, maars, low shields, lava fields, stratovolcanoes, and calderas, but monogenetic volcanoes are the defining characteristic of DVFs. The number of vents and lifespans of DVFs vary greatly; vent numbers range from 2 to greater than 1,000, and fields can remain active for 150,000 to 10 million years. Some characteristics of DVFs appear field dependent. Although the volumes of single monogenetic eruptions within DVFs globally are variable (from less than 0.1 to a few cubic kilometers), each field may have a characteristic range in eruption volumes. Eruptions within distributed volcanic fields can have a random distribution and timing, but spatial and (or) temporal vent clustering and alignment are common, and eruptions may be time or volume predictable. Average eruption recurrence intervals in DVFs span over an order of magnitude, from less than 3 to greater than 100 thousand years. Exposures of the shallow portions of older systems reveal that many magma batches end their ascent before reaching the surface, with some dikes stopping within only meters of the surface. Petrologic insights into the deeper plumbing systems of DVF volcanoes indicate variable depths of magma crystallization and (or) stalling, and that magma transport and storage systems may be unique to a particular DVF and its underlying crustal structure. Both seismic and petrologic data for mafic DVF eruptions corroborate intrusions of magma into storage systems in the months to years before eruption, as well as variable ascent rates through the crust (days to weeks). Few distributed fields are closely monitored, as they erupt infrequently, but these observations imply that the amount of time available to install monitoring instrumentation after the first felt seismicity may be short, as precursory activity is frequently on the order of days to months for modern DVF eruptions. Satellite-based geodesy may provide useful warning in such cases. This chapter concludes with outstanding questions and areas for future research that will aid in our understanding and preparedness for future DVF eruptions.

Professional Paper↗
USGS2026

Effects of a low-lipid diet on the gut microbiome and head kidney transcriptome of juvenile Chinook Salmon

Objective Pacific salmon Oncorhynchus spp. reared in production hatcheries are typically fed high-lipid, energy-dense diets to achieve large size and high body condition prior to release. In contrast, juveniles in natural environments tend to consume low-lipid, high-protein diets, and fish reared for research or conservation purposes are sometimes fed diets that are formulated to mimic natural diets and promote wild-like phenotypes. Understanding how these alternative diets affect fish health beyond growth and body condition could ultimately contribute to improving hatchery fish fitness. Methods In this work, we evaluated changes in the fecal microbiome and gene expression of juvenile Chinook Salmon O. tshawytscha on a standard high-lipid hatchery diet versus a low-lipid diet formulated to mimic the nutrition profile of natural-origin fish. To evaluate the time scale at which diet alters the fecal microbiome, we collected longitudinal samples over a 12-week period and switched the diets of a subset of fish twice during the experiment. We used 16S ribosomal RNA gene amplicon sequencing to characterize fecal microbiome differences between fish on the two diets as well as hatchery-reared fish at a production hatchery, hatchery fish that had been captured after release into a stream, and natural-origin, stream-reared fish of similar ages. Additionally, we conducted RNA sequencing on head kidney samples from laboratory-reared fish to evaluate changes in gene expression in this important immune organ. Results We found that the low-lipid diet and the hatchery diet resulted in microbiomes that differed from the microbiome of natural-origin fish and from each other and that diet-driven changes to the microbiome could occur in under 14 d. The low-lipid diet did not result in a microbiome that resembled the microbiome of naturally produced fish. Instead, the low-lipid diet resulted in a microbiome community that was distinct from those of fish reared on the hatchery diet and fish sampled from the wild. The RNA sequencing results indicated differential enrichment of pathways related to immunity, metabolism, and hormone synthesis between fish that were fed the two experimental diets. Conclusions The results suggest that additional environmental factors influence the microbiome more strongly than diet formulation or that the low-lipid diet has a smaller effect on the microbiome than a natural, ­invertebrate-based diet. Given that the gut microbiome and systemic immune function contribute significantly to disease resistance, our findings highlight the importance of understanding how diets fed to fish in captivity may affect fish health beyond growth and body condition metrics.

Journal of Aquatic Animal Health↗
USGS2025

Leveraging wildfire to augment forest management and amplify forest resilience

Successive catastrophic wildfire seasons in western North America have escalated the urgency around reducing fire risk to communities and ecosystems. In historically frequent-fire forests, fuel buildup as a result of fire exclusion is contributing to increased fire severity. The probability of high-severity fire can be reduced by active forest management that reduces fuels, prompting federal and state agencies to commit significant resources to increase the pace and scale of fuel reduction treatments. However, lower severity areas of wildfires also have the potential to act as “treatments,” and even catastrophic fires with large areas of high severity can still have substantial areas of lower severity fire that may be improving forest conditions locally. We quantified active management and wildfire severity across yellow pine and mixed conifer (YPMC) forests in the Sierra Nevada of California over a 22-year period (2001–2022). We did not detect increases in the area treated through time, but the area of beneficial wildfire (low to moderate severity) increased substantially, exceeding active treatment area in 8 of 22 years. Overall, beneficial wildfire treated ~17% more area than all treatments combined, and roughly four times more area than fire-related treatments alone. We then used disturbance history to evaluate resistance to high-severity wildfire and forest loss across the YPMC range. Of the 2.3 million ha YPMC of forests in 2001, 20% lost mature forests due to high-severity fire by 2022, which is nearly half of all YPMC area burned. Most of the landscape (47%) remains at risk of high-severity fire because it had no restorative disturbances, but 33% of the study area has some level of resistance to high-severity wildfire. In these areas, resistance will need to be enhanced and maintained over time via active management or managed wildfire, but these treatment needs will likely outpace capacity even under optimistic implementation scenarios. Given limited resources for implementing active management and the likelihood of a more fiery future, incorporating beneficial wildfire into landscape-level treatment planning has the potential to amplify the impact of active management treatments.

California, Nevada↗