SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The article offers information on cesium, a golden alkali metal derived from the Latin word caesium which means bluish gray. It mentions that cesium is the first element discovered with the use of spectroscopy. It adds that the leading producer and supplier of cesium is Canada and there are 50,000 kilograms of cesium consumed of the world in a year. Moreover, it states that only 85% of the cesium formate can be retrieved and recycled.
In this chapter, we describe the hydrothermal diamond-anvil cell (HDAC), which is specifically designed for experiments on systems with aqueous fluids to temperatures up to ~1000ºC and pressures up to a few GPa to tens of GPa. This cell permits optical observation of the sample and the in situ determination of properties by ‘photon-in photon-out’ techniques such as Raman spectroscopy. Several methods for pressure measurement are discussed in detail including the Raman spectroscopic pressure sensors a-quartz, berlinite, zircon, cubic boron nitride (c-BN), and 13 C-diamond, the fluorescence sensors ruby (α-Al 2 O 3 :Cr 3+ ), Sm:YAG (Y 3 Al 5 O 12 :Sm 3+ ) and SrB 4 O 7 :Sm 2+ , and measurements of phase-transition temperatures. Furthermore, we give an overview of published Raman spectroscopic studies of geological fluids to high pressures and temperatures, in which diamond anvil cells were applied.
Nuclear magnetic resonance (NMR) at low field is used extensively to provide porosity and pore-size distributions in reservoir rocks. For unconventional resources, due to low porosity and permeability of the samples, much of the signal exists at very short T 2 relaxation times. In addition, the organic content of many shales will also produce signal at short relaxation times. Despite recent improvements in low-field technology, limitations still exist that make it difficult to account for all hydrogen-rich constituents in very tight rocks, such as shales. The short pulses and dead times along with stronger gradients available when using high-field NMR equipment provides a more complete measurement of hydrogen-bearing phases due to the ability to probe shorter T 2 relaxation times (<10 -5 sec) than can be examined using low-field equipment. Access to these shorter T 2 times allows for confirmation of partially resolved peaks observed in low-field NMR data that have been attributed to solid organic phases in oil shales. High-field (300 MHz or 7 T) NMR measurements of spin-spin T 2 and spin-lattice T 1 magnetic relaxation of raw and artificially matured oil shales have potential to provide data complementary to low field (2 MHz or 0.05T) measurements. Measurements of high-field T 2 and T 1 -T 2 correlations are presented. These data can be interpreted in terms of organic matter phases and mineral-bound water known to be present in the shale samples, as confirmed by Fourier transform infrared spectroscopy, and show distributions of hydrogen-bearing phases present in the shales that are similar to those observed in low field measurements.
The "Shaler" outcrop in Gale crater is approximately 0.7 m thick and >20 m long, and exhibits multiple well-exposed platy and cross-stratified facies [1] interpreted to be primarily fluvial sandstone deposits. The outcrop is a part of the upper Glenelg member in the Yellowknife Bay (YKB) stratigraphic section [2]. Curiosity first encountered the "Shaler" outcrop on sol 121 of the mission, and returned to the outcrop on sols 309- 324. The rugged nature of the outcrop and short time available for analysis limited opportunities for contact science, but ChemCam’s ability to remotely collect compositional and textural observations resulted in a large data set from Shaler. ChemCam conducted analyses of 29 non-soil targets at Shaler, 26 of which used laser-induced breakdown spectroscopy (LIBS) for a total of 9,180 spectra. Three observations used only the remote micro-imager (RMI). Each of the 26 LIBS targets were analyzed at between 5 and 25 points, providing a measure of the target homogeneity and in some cases transecting fine strata.
The focus of this chapter was to summarize the advances made over last 40+ years, as reported in various chapters of this book, in understanding, modeling, and mapping terrestrial vegetation using hyperspectral remote sensing (or imaging spectroscopy) using sensors that are ground-based, truck-mounted, airborne, and spaceborne. As we have seen in various chapters of this book and synthesized in this chapter, the advances made include: (a) significantly improved characterization and modeling of a wide array of biophysical and biochemical properties of vegetation, (b) ability to discriminate plant species and vegetation types with high degree of accuracies (c) reducing uncertainties in determining net primary productivity or carbon assessments from terrestrial vegetation, (d) improved crop productivity and water productivity models, (b), (e) ability to access stress resulting from causes such as management practices, pests and disease, water deficit or excess; , and (f) establishing more sensitive wavebands and indices to detect plant water\moisture content. The advent of spaceborne hyperspectral sensors (e.g., NASA’s Hyperion, ESA’s PROBA, and upcoming NASA’s HyspIRI) and numerous methods and techniques espoused in this book to overcome Hughes phenomenon or data redundancy when handling large volumes of hyperspectral data have generated tremendous interest in advancing our hyperspectral applications knowledge base over larger spatial extent such as region, nation, continent, and globe.
Recent advances in hyperspectral remote sensing (or imaging spectroscopy) demonstrate a great utility for a variety of land monitoring applications. It is now possible to be diagnostic in sensing species and plant communities using remotely sensed data and to do so in a direct and informed manner using modern tools and analyses. Hyperspectral data analyses are superior to traditional broadband analyses in spectral information. Many investigations explore and document remote sensing of vegetation and agricultural croplands. Some examples include (a) detecting plant stress [1], (b) measuring chlorophyll content of plants [2], (c) identifying small differences in percent of green vegetation cover [3], (d) extracting biochemical variables such as nitrogen and lignin [2,4–6], (e) discriminating land-cover types [7], (f) detecting crop moisture variations [8], (g) sensing subtle variations in leaf pigment concentrations [2,9,10], (h) modeling biophysical and yield characteristics of agricultural crops [6,11,12], (i) improving the detection of changes in sparse vegetation [13], and (j) assessing absolute water content in plant leaves [14]. This is a fairly detailed list but not exhaustive, meant to provide the reader with a measure of the current, proven experimental capabilities, and operational applications, and stimulate investigations of new, ambitious applications.
The earth resources observation satellite (EROS) program in the Department of the Interior is intended to gather and use data from satellites and aircraft on natural and man-made features of the earth's surface. Earth resources technology satellite will provide the EROS program with data for use in dealing with natural resource problems and understanding the interaction between man and the environment. Applications will include studies of tectonic features, hydrologic problems, location of fish schools, determination of the conditions of range land, mapping land use for urban planning, studies of erosion and change along coastlines and major streams, and inventories of land use and land forms. In addition, the ERTS data may be used for detecting forest and crop diseases and inventorying crops. The ERTS satellite will be in a polar, sun-synchronous orbit so that each point on the earth's surface will be sensed every 17 to 20 days, at the same time of day. Multispectral photography is being investigated for its usefulness in hydrology. Side-looking airborne radar has not yet been widely used in hydrologic studies, although it is an excellent tool for all-weather, day or night, coverage of large areas. Other techniques being investigated include passive microwave radiometry, ultraviolet and visible stimulated luminescence, and absorption spectroscopy.
Airbursts/impacts by a fragmented comet or asteroid have been proposed at the Younger Dryas onset (12.80 ± 0.15 ka) based on identification of an assemblage of impact-related proxies, including microspherules, nanodiamonds, and iridium. Distributed across four continents at the Younger Dryas boundary (YDB), spherule peaks have been independently confirmed in eight studies, but unconfirmed in two others, resulting in continued dispute about their occurrence, distribution, and origin. To further address this dispute and better identify YDB spherules, we present results from one of the largest spherule investigations ever undertaken regarding spherule geochemistry, morphologies, origins, and processes of formation. We investigated 18 sites across North America, Europe, and the Middle East, performing nearly 700 analyses on spherules using energy dispersive X-ray spectroscopy for geochemical analyses and scanning electron microscopy for surface microstructural characterization. Twelve locations rank among the world’s premier end-Pleistocene archaeological sites, where the YDB marks a hiatus in human occupation or major changes in site use. Our results are consistent with melting of sediments to temperatures >2,200 °C by the thermal radiation and air shocks produced by passage of an extraterrestrial object through the atmosphere; they are inconsistent with volcanic, cosmic, anthropogenic, lightning, or authigenic sources. We also produced spherules from wood in the laboratory at >1,730 °C, indicating that impact-related incineration of biomass may have contributed to spherule production. At 12.8 ka, an estimated 10 million tonnes of spherules were distributed across ∼50 million square kilometers, similar to well-known impact strewnfields and consistent with a major cosmic impact event.
Both instrument design and capabilities of fluorescence spectroscopy have greatly advanced over the last several decades. Advancements include solid-state excitation sources, integration of fiber optic technology, highly sensitive multichannel detectors, rapid-scan monochromators, sensitive spectral correction techniques, and improve data manipulation software (Christian et al., 1981, Lochmuller and Saavedra, 1986; Cabniss and Shuman, 1987; Lakowicz, 2006; Hudson et al., 2007). The cumulative effect of these improvements have pushed the limits and expanded the application of fluorescence techniques to numerous scientific research fields. One of the more powerful advancements is the ability to obtain in situ fluorescence measurements of natural waters (Moore, 1994). The development of submersible fluorescence instruments has been made possible by component miniaturization and power reduction including advances in light sources technologies (light-emitting diodes, xenon lamps, ultraviolet [UV] lasers) and the compatible integration of new optical instruments with various sampling platforms (Twardowski et at., 2005 and references therein). The development of robust field sensors skirt the need for cumbersome and or time-consuming filtration techniques, the potential artifacts associated with sample storage, and coarse sampling designs by increasing spatiotemporal resolution (Chen, 1999; Robinson and Glenn, 1999). The ability to obtain rapid, high-quality, highly sensitive measurements over steep gradients has revolutionized investigations of dissolved organic matter (DOM) optical properties, thereby enabling researchers to address novel biogeochemical questions regarding colored or chromophoric DOM (CDOM). This chapter is dedicated to the origin, design, calibration, and use of in situ field fluorometers. It will serve as a review of considerations to be accounted for during the operation of fluorescence field sensors and call attention to areas of concern when making this type of measurement. Attention is also given to ways in which in-water fluorescence measurements have revolutionized biogeochemical studies of CDOM and how those measurements can be used in conjunction with remotely sense satellite data to understand better the biogeochemistry of DOM in aquatic environments.
The uranium concentration and isotopic composition of water and suspended sediment from the Nueces River, Nueces Bay and Corpus Christi Bay were determined by alpha-spectroscopy. The average dissolved uranium concentration and radioactivity ratio (U 234 /U 238 ) of Nueces River water were determined to be 2.44 µg/1 and 1.15 respectively. Water from a tributary of the Nueces River, Cayamon Creek, was found to contain an average dissolved uranium concentration of 42.8 µg/1 with an isotopic radioactivity ratio of 1.56. Close inspection of the lateral concentration and isotopic activity ratio of uranium revealed an increase below the confluence of Cayamon Creek with the Nueces River. A model was derived based on equations used in isotopic dilution analysis, which predicts these increases within analytical error. This model may be useful in future studies to locate anomalous uranium within the hydrologic environment.
In the pressure range in the Earth’s mantle where many basaltic magmas are generated (1 to 3 GPa) (Stolper et al. 1981), increases in the coordination numbers of the network-forming cations in aluminosilicate melts have generally been considered to be minor, although effects on silicon and particularly on aluminum coordination in non-bridging oxygen-rich glasses from the higher, 5 to 12 GPa range, are now well known. Most high-precision measurements of network cation coordination in such samples have been made by spectroscopy (notably 27 Al and 29 Si NMR) on glasses quenched from high-temperature, high-pressure melts synthesized in solid-media apparatuses and decompressed to room temperature and 1 bar pressure. There are several effects that could lead to the underestimation of the extent of actual structural (and density) changes in high-pressure/temperature melts from such data. For non-bridging oxygen-rich sodium and calcium aluminosilicate compositions in the 1 to 3 GPa range, we show here that glasses annealed near to their glass transition temperatures systematically record higher recovered increases in aluminum coordination and in density than samples quenched from high-temperature melts. In the piston-cylinder apparatus used, rates of cooling through the glass transition are measured as very similar for both higher and lower initial temperatures, indicating that fictive temperature effects are not the likely explanation of these differences. Instead, transient decreases in melt pressure during thermal quenching, which may be especially large for high initial run temperatures, of as much as 0.5 to 1 GPa, may be responsible. As a result, the equilibrium proportion of high-coordinated Al in this pressure range may be 50 to 90% greater than previously estimated, reaching mean coordination numbers (e.g., 4.5) that are probably high enough to significantly affect melt properties. New data on jadeite (NaAlSi 2 O 6 ) glass confirm that aluminum coordination increase with pressure is inhibited in compositions low in non-bridging O atoms.
In this chapter, we describe the hydrothermal diamond-anvil cell (HDAC), which is specifically designed for experiments on systems with aqueous fluids to temperatures up to ⬚~1000ºC and pressures up to a few GPa to tens of GPa. This cell permits optical observation of the sample and the in situ determination of properties by ‘photon-in photon-out’ techniques such as Raman spectroscopy. Several methods for pressure measurement are discussed in detail including the Raman spectroscopic pressure sensors a-quartz, berlinite, zircon, cubic boron nitride (c-BN), and 13C-diamond, the fluorescence sensors ruby (α-Al2O3:Cr3+), Sm:YAG (Y3Al5O12:Sm3+) and SrB4O7:Sm2+, and measurements of phase-transition temperatures. Furthermore, we give an overview of published Raman spectroscopic studies of geological fluids to high pressures and temperatures, in which diamond anvil cells were applied.
An indepth evaluation of the available technology in the field of laser-Raman spectroscopy indicates that a TV-type detector, a single monochromator with a holographic grating, an entrance slit filter blocking the Rayleigh light, and a pulsed laser coupled to signal averaging electronics is the best combination of commercial equipment that is presently available for building a remote water-quality sensor. The resultant sensor would be capable of measuring oxyanions in water at concentrations from 10 to 50 milligrams per liter at distances from ground level to 30 meters above the sample. The main interferences would be ambient light, bioluminescence, and natural fluorescence, all of which are minimized when taking advantage of the signal generating and readout capability contained in this equipment package.
Thallium was determined in 16 USGS standard rocks by atomic absorption spectroscopy in which a heated graphite atomizer was used after extraction as thallium iodide into amyl acetate. Four subsamples from four bottles of each standard sample, except G-1 and W-1, were analyzed in random order, and the average thallium contents in parts per million (as Tl) were AGV-1, 0.41; GSP-1, 1.63; G-2, 1.08; BCR-1, 0.35; SDC-1, 0.80; MAG-1, 0.79; BHVO-1, 0.049; SCO-1, 0.79; SGR-1, 0.34; QLO-1, 0.23; RGM-1, 1.07 ; STM-1, 0.30; DTS-1, <0.005; and PCC-1, <0.005. The analysis of variance showed that all samples may be considered homogeneous at F 0.975 and only GSP-1 may be considered heterogeneous at F 0.95 . The Tl contents of G-1 and W-1 are 1.0 and 0.12 ppm, respectively.
Accretionary lapilli from Tagus cone, Isla Isabela, Galápagos were analyzed using scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS) techniques. Our main findings are (1) the lapilli formed and hardened in a few minutes while still aloft in the dispersing eruption column. (2) Palagonite rinds developed first on the basaltic glass clasts, and subsequently crystallized (3) The crystallization products contain submicron lamellar crystals of a clay (probably smectite) on the surfaces of basaltic glass clasts and (4) The interlocking of these lamellar clays from adjacent clasts binds and cements them together to form the accretionary lapillus. We argue that palagonite and possibly clay formation occur primarily in the presence of hot water vapor.
The effects of water temperature and concentration on the physical characteristics of Zequanox®, a dead-cell spray-dried powder formulation of Pseudomonas fluorescens (strain CL145A) used for controlling invasive dreissenid mussels (zebra mussel, Dreissena polymorpha, and quagga mussel, Dreissena bugensis), were investigated to determine optimal temperature-specific concentrations and delivery techniques for use during open-water subsurface Zequanox applications. Temperature-controlled laboratory tests evaluated viscosity, settling, stratification, and buoyancy of various concentrations of Zequanox suspension in water to select an optimal target viscosity for Zequanox applications. A two-step linear regression procedure was used to create a temperature-specific Zequanox prediction model from the viscosity data. The prediction model and subsurface application techniques were validated by conducting three independent outdoor pond trials at temperatures of ~9, 14, and 20°C. During these outdoor trials, subsurface applications of Zequanox at concentrations predicted by the model were performed and water samples were collected at varying depths and analyzed via spectroscopy to determine Zequanox concentration and dispersion. Although the predicted Zequanox concentrations and delivery techniques used resulted in successfully maintaining lethal Zequanox concentrations in the bottom 7.5 cm of the water column for the duration of the exposure, a revised prediction model is also provided for more accurately selecting temperature-specific Zequanox concentrations.
Knowledge of petrophysical and geomechanical properties of gas hydrate-bearing sediments are essential for predicting reservoir responses to gas production. The same information is also needed for the designing of production well completions such as specifications for artificial lift, test site water storage capacity, and mesh size for the sand control systems. In December 2018, the Stratigraphic Test Well Hydrate-01 was drilled in the western part of the Prudhoe Bay Unit on the Alaska North Slope as part of the technical planning effort for a future long-term production test being planned and led by a collaborative team from the U.S. Department of Energy - National Energy Technology Laboratory (DOE-NETL), U.S. Geological Survey (USGS), and Japan’s Research and Development Consortium for Pore Filling Hydrate in Sand (MH21-S) (Boswell et al., 2020, Collett et al., 2020, Okinaka et al., 2020). Logging-while-drilling (LWD) data were acquired (Haines et al., 2020, Suzuki et al., 2019) and sidewall core sampling depths were selected from the LWD logs. Sidewall pressure coring was conducted to recover gas hydrate-bearing sediments from two reservoir sections named Unit B and Unit D. A total of 34 cores were successfully recovered by 5 runs of a wireline deployed pressure coring system (CoreVault® System - Halliburton). The core analysis plan for this project is shown in Figure 1. Upon recovery, the pressure core autoclaves were transported from the Alaska North Slope to the Stratum Reservoir laboratory in Anchorage Alaska. To access the cores, they were first quenched in liquid nitrogen while still at high pressure in the core system autoclaves (Figure 1a). The cores were next removed from the pressure corer autoclaves with temperature control support from dry ice and stored under liquid nitrogen at atmospheric pressure. A total of 19 disturbed low-quality cores were processed for index property measurements, which included grain size and grain density analysis. Another 4 core samples were depressurized, trimmed, and core plugs were cut from each core and used to measure intrinsic permeabilities of host sediments (Figure 1). Unsteady-state permeability measurements were conducted on two samples to obtain relative water permeability (Rel.-Perm.) to gas and core scale Nuclear Magnetic Resonance (NMR) transverse relaxation time (T2) distribution measurements were performed to evaluate pore size distribution (Figure 1b). A total of 13 remaining high-quality cores with significant gas hydrate concentrations were preserved for advanced laboratory analysis. The National Institute of Advanced Industrial Science and Technology, as a part of the Japanese National Hydrate Research Program (MH21-S, funded by Ministry of Economy, Trade and Industry), received the 13 remaining high-quality core samples at their laboratories in Sapporo, Japan for advanced core analysis. High-resolution X-ray computed tomography (CT) was used to analyze the physical characteristics of the samples, which showed for the most part undisturbed lithological layers. Cores were lathed into cylindrical shapes and prepared for multi property measurements (Figure 1c). As a result, sediment from Unit D was characterized as silty-sand at ~37% porosity with ~80% gas hydrate saturation. An average hydration number n = 6.16 was measured for the recovered gas hydrate samples by Raman spectroscopy. An average intrinsic permeability of ~400 mD and in situ effective permeability (with hydrate) on the order of ~10 mD was measured for a total of five core samples. The Unit B recovered cores consisted of well sorted sand at ~40% porosity with ~95% gas hydrate saturation. An average intrinsic permeability of ~1 Darcy and in situ effective permeability on the order of ~30 mD was measured for the Unit B cores. Additional laboratory measurements yielded small permeability reductions due to porosity loss with increasing effective stress that simulated sediment consolidation along with depressurization in the highly permeable sandy sediment. The apparent limited change in porosity and permeability may be caused by the low compressibility of quartz sand grains in the recovered cores. X-ray diffraction (XRD) and thermal conductivity analysis also indicated a high quartz content within the recovered cores. Completed triaxial compression tests established internal friction angles based on the Mohr-Coulomb's failure criterion, which were calculated at 40° for hydrate-bearing sediment and 29.8° for hydrate free sediment.
Precious- and base-metal mining often occurs in deposits with high acid-generating potential, resulting in mine waste that contains metals in forms of varying bioavailability, and therefore toxicity. The solids that host these metals are often noncrystalline, nanometer to micrometer in size, or undetectable by readily available analytical techniques (e.g., X-ray diffraction). This analytical shortcoming can pose a challenge when attempting to characterize sources and natural attenuation of metals at a given site, which is a best practice to satisfy closure due diligence. Numerous case studies have shown that efforts to characterize mine waste at multiple scales, particularly the micrometer scale, often lead to a better understanding of metal distribution and potential contamination risks. This paper presents a case study that compares the use of both traditional and non-traditional techniques to identify and quantify metal hosts in sediments downstream of the abandoned mine waste piles at the Ely Copper Mine Superfund site in Vermont (USA). The contaminant present in the highest concentration in the sediments is copper, yet not all copper-bearing solids were detected with bulk X-ray diffraction (XRD). At the micrometer scale, a combination of synchrotron-based X-ray absorption spectroscopy (XAS) and an automated mineralogy (AM) system were used to identify the most abundant copper-bearing solids. Bulk XAS and AM also provided semi-quantitative abundances of these solids in the sediment. At the Ely Copper Mine, copper in stream sediments was found to be predominantly hosted in sulphide minerals downstream of a major mine waste pile, whereas upstream copper was predominantly hosted in secondary iron and manganese (oxyhydr)oxides. These copper-bearing hosts were consistent with the expected bioavailability of copper in the sediments based on laboratory toxicity tests with aquatic organisms. When the bulk of copper was present in sulphides, aquatic organisms experienced greater survival than when copper was mostly associated with secondary iron and manganese (oxyhydr)oxides. The information gained from probing the sediments at multiple scales can now be used to prioritize containment and remediation strategies. While synchrotron-based analytical techniques have proven to be invaluable in many studies of mine waste, access to these techniques is limited. In contrast, access to a scanning electron microscope that can perform AM is becoming more common, primarily for the application in mining design and mineral processing operations. More recently, the successful use of AM to characterize mine waste suggests that this technique can be equally as valuable for mine closure plans. The resolution of information obtained may go beyond what is required from a regulatory perspective, but given that the results have the potential to be more conclusive than many traditional techniques, this level of characterization may save time and money in the long run.