USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Environmental Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 36Linked to original sources
USGS2025

Apatite geo-thermochronology and geochemistry constrain Oligocene-Miocene growth and geodynamics of the northeastern Tibetan Plateau

Understanding the geodynamics of plateau evolution requires examining the spatial and temporal aspects of mountain building in the northeastern Tibetan Plateau, which are still under debate. Here we integrate apatite geo-thermochronological and geochemical data from the Oligocene-Miocene succession of the Xunhua Basin to elucidate the evolution of the regional topography. The results suggest sediment provenance changes, at ca. 28, 20 and 12 Ma, indicating topographic growth of the West Qinling, Laji Shan, and Jishi Shan source areas, respectively. Our findings reveal Oligocene-Miocene stepwise deformation and middle Miocene stress reorganization within the northeastern Tibetan Plateau. We attribute this to Oligocene lithospheric foundering beneath the south-central Tibetan Plateau and the middle Miocene initiation of sinistral strike-slip faults due to the underthrusting of India and North China. This study highlights the roles of lithospheric removal and continental underthrusting in plateau growth, and the value of multi-proxy apatite analyses in provenance studies.

Northeastern Tibetan Plateau↗
USGS1993

Geochemistry of and radioactivity in ground water of the Highland Rim and Central Basin aquifer systems, Hickman and Maury counties, Tennessee

A reconnaissance of the geochemistry of and radioactivity in ground water from the Highland Rim and Central Basin aquifer systems in Hickman and Maury Counties, Tennessee, was conducted in 1989. Water in both aquifer systems typically is of the calcium or calcium magnesium bicarbonate type, but concentrations of calcium, magnesium, sodium, potassium, chloride, and sulfate are greater in water of the Central Basin system; differences in the concentrations are statistically significant. Dissolution of calcite, magnesium-calcite, dolomite, and gypsum are the primary geochemical processes controlling ground-water chemistry in both aquifer systems. Saturation-state calculations using the computer code WATEQF indicated that ground water from the Central Basin system is more saturated with respect to calcite, dolomite, and gypsum than water from the Highland Rim system. Geochemical environments within each aquifer system are somewhat different with respect to dissolution of magnesium-bearing minerals. Water samples from the Highland Rim system had a fairly constant calcium to magnesium molar ratio, implying congruent dissolution of magnesium-bearing minerals, whereas water samples from the Central Basin system had highly variable ratios, implying either incongruent dissolution or heterogeneity in soluble constituents of the aquifer matrix. Concentrations of radionuclides in water were low and not greatly different between aquifer systems. Median gross alpha activities were 0.54 picocuries per liter in water from each system; median gross beta activities were 1.1 and 2.3 picocuries per liter in water from the Highland Rim and Central Basin systems, respectively. Radon-222 concentrations were 559 and 422 picocuries per liter, respectively. Concentrations of gross alpha and radium in all samples were substantially less than Tennessee’s maximum permissible levels for community water-supply systems. The data indicated no relations between concentrations of dissolved radionuclides (uranium, radium-226, radium-228, radon-222, gross alpha, and gross beta) and any key indicators of water chemistry, except in water from the Highland Rim system, in which radon-222 was moderately related to pH and weakly related to dissolved magnesium. The only relation among radiochemical constituents indicated by the data was between radium-226 and gross alpha activity; this relation was indicated for water from both aquifer systems.

Tennessee↗
USGS2026

Bathymetric maps, surface areas, and storage capacities of Council Grove Lake and Marion Reservoir, Kansas, and Pine Creek Lake, Oklahoma, 2024

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, completed high-resolution multibeam bathymetric surveys to compute new elevation-area-capacity tables for Council Grove Lake and Marion Reservoir, Kansas, and Pine Creek Lake, Oklahoma. Elevation-area-capacity tables identify the relation between the water-surface elevation, surface area, and storage capacity of the lake. The surface areas and storage capacities of each lake were computed from bathymetric surfaces combining multibeam echo sounder data collected in 2024 and light detection and ranging point-cloud data collected in 2016 and 2018.

Kansas, Oklahoma↗
USGS2026

Resurvey of the Marble Canyon and Bridge Canyon dam sites in Grand Canyon National Park—Changes in sediment storage and evidence supporting the occurrence of bedrock incision through the mid-20th century

The Bureau of Reclamation developed an extensive plan for a network of dams, water tunnels, and hydropower plants in and around Grand Canyon, Arizona, in the 1940s through 1960s. The two largest of these planned dams were the Marble Canyon and Bridge Canyon Dams on the Colorado River. Though these dams were ultimately never built, Reclamation conducted extensive topographic, bathymetric, and subsurface exploration work at the sites proposed for these dams in the 1940s and 1950s. Resurveys of these dam sites were conducted between 1998 and 2021 to determine the changes in sediment storage at these dam sites caused by the upstream construction and operation of Glen Canyon Dam and by the recession of Lake Mead, the reservoir impounded by Hoover Dam. The resurveys of the Marble Canyon dam sites indicate that the post-1950s changes in sediment storage at these dam sites are broadly consistent with flux-based estimates of voluminous sand erosion from Marble Canyon since the 1963 closure of Glen Canyon Dam. These resurveys also suggest that the pre-dam longitudinal variation in sediment thickness over bedrock played a key role in determining the locations of the sand erosion induced by Glen Canyon Dam; more sand eroded from locations where more sand was present in the 1950s. The resurvey of the Bridge Canyon dam sites indicates that the Colorado River’s incision of the Lake Mead delta is regulated both by bed-sediment grain size and downstream hydraulic controls. Finally, analyses of bed-sediment thickness and sedimentological data at the dam sites, and observations of bed scour and gravel transport, suggest that sufficient bedrock was exposed to allow bedrock incision during commonly recurring pre-dam snowmelt floods that entrained small boulders into transport.

Arizona↗
USGS2026

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin↗
USGS2024

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Medina County, Texas

During 2023–24, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised a previous publication of the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers that was completed during 2018–20 within northern Medina County, Texas. The purpose of this report is to present the updated geologic framework and hydrostratigraphy of the rocks containing the Edwards and Trinity aquifers in northern Medina County from field observations of the surficial expressions of the rocks. The report includes a detailed 1:24,000-scale hydrostratigraphic map with names and descriptions of the geologic and hydrostratigraphic units (HSUs) in the study area. This study includes updates to the geology of the Kainer Formation (or its stratigraphic equivalent, the Fort Terrett Formation) with the addition of a burrowed unit between the basal nodular and dolomitic members. The hydrostratigraphy was also updated with the addition of HSU IIA for the upper part of the Devils River Limestone and the Seco Pass HSU for the burrowed member of the Kainer (or Fort Terrett) Formation. The Cretaceous age rocks (listed in ascending order) in the study area are part of the Trinity Group, Edwards Group and stratigraphically equivalent Devils River Limestone, Washita Group, Eagle Ford Group, Austin Group, and Taylor Group, with isolated areas where Late Cretaceous age igneous rocks have intruded. The groups and formations are composed primarily of relatively thick layers of clays, shales, and limestone. The igneous rocks are coarse-grained ultramafic in composition. Hydrostratigraphically, the rocks exposed in the study area (listed in descending order from land surface) are igneous, the upper confining unit to the Edwards aquifer, the Edwards aquifer, the upper zone of the Trinity aquifer, and the upper part of the middle zone of the Trinity aquifer. The karstic carbonate Edwards and Trinity aquifers developed because of their original depositional history, primary and secondary porosity, diagenesis, fracturing, and faulting. These factors have resulted in development of modified porosity, permeability, and transmissivity within and between the aquifers.

Texas↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2025

Enhanced hydrologic monitoring and characterization of groundwater drainage features

Groundwater drains to the land surface, generating the baseflow of streams, lakes, and wetlands. The hydrologic resilience of baseflow during prolonged dry periods and after disturbance can be assessed with evolving remote sensing analysis paired with localized monitoring of groundwater drainage features and creative model calibration strategies.

Nature Water↗
USGS2025

Physicochemical properties and bioreactivity of sub-10 µm geogenic particles: Comparison of volcanic ash and desert dust

Exposure to ambient particulate matter (PM) with an aerodynamic diameter of <10 μm (PM 10 ) is a well-established health hazard. There is increasing evidence that geogenic (Earth-derived) particles can induce adverse biological effects upon inhalation, though there is high variability in particle bioreactivity that is associated with particle source and physicochemical properties. In this study, we investigated physicochemical properties and biological reactivity of volcanic ash from the April 2021 eruption of La Soufrière volcano, St. Vincent, and two desert dust samples: a standardized test dust from Arizona and an aeolian Gobi Desert dust sampled in China. We determined particle size, morphology, mineralogy, surface texture and chemistry in sub-10 μm material to investigate associations between particle physicochemical properties and observed bioreactivity. We assessed cellular responses (cytotoxic and pro-inflammatory effects) to acute particle exposures (24 hr) in monocultures at the air-liquid interface using two types of cells of the human airways: BEAS-2B bronchial epithelial cells and A549 alveolar type II epithelial cells. In acellular assays, we also assessed particle oxidative potential and the presence of microorganisms. The results showed that volcanic ash and desert dust exhibit intrinsically different particle morphology, surface textures and chemistry, and variable mineralogical content. We found that Gobi Desert dust is more bioreactive than freshly erupted volcanic ash and Arizona test dust, which is possibly linked to the presence of microorganisms (bacteria) and/or nanoscale elongated silicate minerals (potentially clay such as illite or vermiculite) on particle surfaces.

GeoHealth↗
USGS2026

Methodology for construction of a three-layer geologic model of the conterminous United States using land surface, top of bedrock, and top of basement

This report describes the methodology used for the construction of a digital three-layer geologic model of the conterminous United States by mapping the altitude of three surfaces: land surface, the top of bedrock, and the top of basement. These surfaces are mapped through the compilation and synthesis of published stratigraphic horizons from numerous topical studies. The mapped surfaces create a three-layer geologic model with three geomaterial-based subdivisions: unconsolidated to weakly consolidated sediment; layered consolidated rock strata that constitute bedrock; and crystalline rocks that are described as “basement,” consisting of either igneous, metamorphic, or highly deformed rocks. The data compilation and synthesis are highly dependent on the definition of the informal terms “bedrock” and “basement,” which may describe different ages or types of rock in different parts of the conterminous United States. This report presents the conceptualization of the three mapped layers, describes the datasets used, and summarizes the decisions made while compiling the three-layer model from the various sources. This digital dataset was created as part of efforts by the U.S. Geological Survey to develop subsurface geologic data in geospatial form as part of a broad directive to develop two-dimensional and three-dimensional geologic information at detailed, national, and continental scales. This digital dataset partly fulfills the goal of the U.S. Geological Survey’s National Cooperative Geologic Mapping Program to construct a national-scale three-dimensional geologic model.

conterminous United States↗
USGS2025

Relationship of basin structure and bedrock lithology to faulting in the 2019 Ridgecrest earthquake region, California, from gravity and aeromagnetic data

We investigate patterns of cumulative offsets on the faults that ruptured in 2019 and along the Garlock Fault in the Ridgecrest region, California using recently published gravity and aeromagnetic data. We also examine the relationship of basin structure and bedrock structure to the 2019 M7.1 Ridgecrest earthquake ruptures (Fig. 1A), which were primarily along a dextral northwest-striking fault system, and along a sinistral northeast-striking fault, which ruptured hours earlier with a M6.4 event.

California↗
USGS1976

Guidelines for collection and field analysis of ground-water samples for selected unstable constituents

The unstable nature of many chemical and physical constituents in ground water requires special collection procedures and field analysis immediately after collection. This report describes the techniques and equipment commonly used in the collection and field analysis of samples for pH, temperature, carbonate, bicarbonate, specific conductance, Eh, and dissolved oxygen.

Open-File Report↗
USGS2024

Are the horizontal-to-vertical spectral ratios of earthquakes and microtremors the same?

We consider the similarities and differences between earthquake and microtremor horizontal‐to‐vertical spectral ratios (eHVSR and mHVSR, respectively) using a dataset of 161 sites in southern California. Quantitative comparisons are made in terms of the eHVSR and mHVSR lognormal median curves, as well as the frequencies and amplitudes associated with the fundamental‐ and higher‐mode resonances where present. The results show only 58% of the eHVSR–mHVSR pairs agree in terms of their median curve and only 25% of the eHVSR–mHVSR pairs agree in terms of shared resonances, which increases to 68% if flat HVSRs are considered equivalent. Furthermore, while the shared resonances match very well in terms of frequency (root mean square error, RMSE, <0.11 Hz), the amplitudes of those resonances do not agree (RMSE >1.6). These findings demonstrate that while eHVSR and mHVSR agree at some sites, they are not equivalent at all sites. To investigate if the agreement between eHVSR and mHVSR could be related to features of the microtremor data, earthquake recordings, and/or the site conditions, three machine learning (ML) models at varying levels of interpretability are presented. The ML models—which include multivariate logistic regression, gradient‐boosted trees, and support vector machines—show only partial success at using site‐specific data to predict whether eHVSR and mHVSR will likely agree in terms of their median curve (accuracy of 78%) and number of resonances (accuracy of 84%). Therefore, we conclude that while eHVSR and mHVSR can be quite similar in terms of resonant frequencies at some sites, they are not identical at all sites. Furthermore, preliminary evidence shows that the agreement of eHVSR and mHVSR can be predicted a priori given features of the microtremor measurements, earthquake recordings, and site conditions, although a larger dataset will be necessary for developing a robust predictive model.

California↗
USGS2026

Cambrian and Ordovician stratigraphy, conodont biostratigraphy, and microfacies analysis to support 1:24,000-scale geologic mapping of the southern Lake Champlain valley, New York and Vermont

Introduction Geologic mapping in the southern Lake Champlain valley of New York and Vermont (fig. 1) has required evaluation of stratigraphic nomenclature used since the early 1900s. The paleogeography of the Cambrian and Ordovician adjacent to the Adirondack Highlands, the high-relief mountains of Proterozoic igneous and metamorphic rocks of northern New York, has impacted the lithostratigraphic succession, facies changes, and several hiatuses that occur within the package of clastic and carbonate rocks that demonstrates overall deepening consistent from the southern to northern Appalachians. The stratigraphic nomenclature used for the geologic mapping of the Cambrian and Ordovician strata of the study area is derived from evaluation of names put forth by previous workers from areas of northern New York and western Vermont. Descriptions of type localities or type sections and other criteria set forth by the North American Stratigraphic Code (North American Commission on Stratigraphic Nomenclature [NACSN], 2021) were consulted. The North American Stratigraphic Code states that lithostratigraphic units, such as the fundamental unit, the formation, be defined by lithic character and be mappable (NACSN, 2021, Article 24). However, some early workers (Walcott, 1912; Kay, 1937; Fisher and Hanson, 1951; Oxley and Kay, 1959) have defined stratigraphic units based on fossil content, which may or may not be facies dependent, and hence may not be mappable as lithostratigraphic units. Although preservation of older names takes priority in stratigraphic nomenclature (NACSN, 2021, Article 7), some do not have adequately defined stratotypes or are located a distance away with different lithologies than that in the study area. Biostratigraphy can be a helpful tool for understanding correlations and facies changes. Herein, conodont biostratigraphy is utilized to date and correlate separate lithologic units. Further, microfacies analyses of units through inspection of petrographic thin sections provide paleogeographic information that helps in understanding the genesis of geologic units.

New York, Vermont↗
USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗