USGS ScienceSearch

SEARCH · USGS Science

Results for “Frontiers in Ecology and Evolution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,672 records · Page 36Linked to original sources

Assessing potential effects of oil and gas development activities on groundwater quality near and overlying the Elk Hills and North Coles Levee Oil Fields, San Joaquin Valley, California

Groundwater resources are utilized near areas of intensive oil and gas development in California’s San Joaquin Valley. In this study, we examined chemical and isotopic data to assess if thermogenic gas or saline water from oil producing formations have mixed with groundwater near the Elk Hills and North Coles Levee Oil Fields in the southwestern San Joaquin Valley. Major ion concentrations and stable isotope compositions were largely consistent with natural processes, including mixing of different recharge sources and water-rock interactions. Trace methane concentrations likely resulted from microbial rather than thermogenic sources. Trace concentrations of benzene and other dissolved hydrocarbons in three wells had uncertain sources that could occur naturally or be derived from oil and gas development activities or other anthropogenic sources. In the mid-1990s, two industrial supply wells had increasing Cl and B concentrations likely explained by mixing with up to 15 percent saline oil-field water injected for disposal in nearby injection disposal wells. Shallow groundwater along the western margin of Buena Vista Lake Bed had elevated Cl, B, and SO 4 concentrations that could be explained by accumulation of salts during natural wetting and drying cycles or, alternatively, legacy surface disposal of saline oil-field water in upgradient ephemeral drainages. This study showed that groundwater had relatively little evidence of thermogenic gas or saline water from oil and gas sources in most parts of the study area. However, the evidence for groundwater mixing with injected disposal water, and possibly legacy surface disposal water, demonstrates produced water management practices as a potential risk factor for groundwater-quality degradation near oil and gas fields. Additional studies in the San Joaquin Valley and elsewhere could improve understanding of such risks by assessing the locations, volumes, and types of produced water disposal practices used during the life of oil fields.

California

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye

Peak-discharge frequency and potential extreme peak discharge for natural streams in the Brazos River basin, Texas

The 2-, 5-, 10-, 25-, 50-, and 100-year peak discharges were estimated for 186 streamflow-gaging stations with at least 8 years of data for natural streams in and near the Brazos River Basin, Texas. Multiple regression equations were developed to estimate peak-discharge frequency for the 2-, 5-, 10-, 25-, 50-, and 100-year recurrence intervals for each of three hydrologic regions that compose the Brazos River Basin. The equations for each region are a function of significant basin characteristics (explanatory variables). The significant explanatory variables among six that were tested are the contributing drainage area and stream slope for regions 1 and 2 and the contributing drainage area for region 3. For the three sets of equations, the coefficient of determination ranges from 0.59 to 0.93, and the standard error ranges from 0.184 to 0.391 log units. A larger coefficient of determination and a lower standard error generally are associated with the equations for hydrologic regions 2 and 3. Statistics from the regression analysis allow computation of the prediction interval associated with a given significance level for a peak-discharge frequency estimate. The regression equations can be used to estimate peak discharges for sites at, near, or away from sites with streamflow-gaging stations. The potential extreme peak-discharge curves as related to contributing drainage area were estimated for each of the three hydrologic regions from measured extreme peaks of record at 186 sites with streamflow-gaging stations and from measured extreme peaks at 37 sites without streamflow-gaging stations in and near the Brazos River Basin. The potential extreme peak-discharge curves generally are similar for hydrologic regions 1 and 2, and the curve for region 3 consistently is below the curves for regions 1 and 2, which indicates smaller peak discharges.

Texas

Wetland sedimentation and vegetation patterns near selected highway crossings in West Tennessee

Wetland sedimentation and vegetation patterns at 11 highway crossings in West Tennessee were studied from 1987 to 1989. The purpose of the study was to investigate potential adverse effects of highway crossings on wetlands. Sedimentation rates, determined from root-burial depths, were highly variable. Average rates offine-grained deposition ranged from 0.005 to 0.033 foot per year for stations in locally ponded areas and from -0.002 to 0.039 foot per year for stations in drained areas. Sedimentation rates upstream from highway crossings were not significantly different from downstream rates at 8 of the 11 study sites. Three study sites had significantly greater sedimentation rates downstream. Sand splays were observed downstream from bridges at most study sites. Vegetation patterns and tree growth appear most strongly related to hydropetiod, defined as the average length of time an area is covered by water each year. The influence of sedimentation on tree growth is difficult to separate from the influence of hydroperiod because areas with high sedimentation rates typically have long hydroperiods. Estimated hydroperiod increased no more than 1 percent because of backwater from the highway crossings at the 11 study sites, while the estimated average depth of flood-plain inundation increased by an average of 6 percent.

Tennessee

Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

Louisiana

Shoals and valley plugs in the Hatchie River watershed

Agricultural land use and gully erosion have historically contributed more sediment to the streams of the Hatchie River watershed than those streams can carry. In 1970, the main sedimentation problem in the watershed occurred in the tributary flood plains. This problem motivated channelization projects (U.S. Department of Agriculture, 1970). By the mid-1980's, concern had shifted to sedimentation in the Hatchie River itself where channelized tributaries were understood to contribute much of the sediment. The Soil Conservation Service [Natural Resources Conservation Service (NRCS) since 1996] estimated that 640,000 tons of bedload (sand) accumulates in the Hatchie River each year and identified roughly the eastern two-thirds of the watershed, where loess is thin or absent, as the main source of sand (U.S. Department of Agriculture, 1986a). The U.S. Geological Survey (USGS), in cooperation with the West Tennessee River Basin Authority (WTRBA), conducted a study of sediment accumulation in the Hatchie River and its tributaries. This report identifies the types of tributaries and evaluates sediment, shoal formation, and valley-plug problems. The results presented here may contribute to a better understanding of similar problems in West Tennessee and the rest of the southeastern coastal plain. This information also will help the WTRBA manage sedimentation and erosion problems in the Hatchie River watershed. The source of the Mississippi section of the Hatchie River is in the sand hills southwest of Corinth, Mississippi (fig. 1). This section of the Hatchie River flows northward in an artificial drainage canal, gathering water from tributary streams that also are channelized. The drainage canal ends 2 miles south of the Tennessee State line. The Tennessee section of the Hatchie River winds north and west in a meandering natural channel to the Mississippi River. Although most of the Hatchie River tributaries are also drainage canals, the river's main stem has kept most of its natural character. The Hatchie River flows through a wide valley bottom occupied mostly by riverine wetland. Historically, the valley bottom has supported hardwood forests. Since publication of the first Hatchie River report (U.S. Department of Agriculture, 1970), the channel of the river has become shallower, and flooding has increased (U.S. Department of Agriculture 1986b). These wetter conditions inhibit growth of hardwoods and lead to premature hardwood mortality. The NRCS has predicted that despite efforts to control erosion in the uplands, most of the valley-bottom forest will die. '...swamping may be so prevalent as to change most of the Hatchie River Basin flood plain into a marsh condition, with the only remnants of the present bottomland hardwood timber remaining. (U.S. Department of Agriculture, 1986b). Loss of channel depth has been concentrated in short reaches near tributary mouths. At the mouths of Richland, Porters, Clover, and Muddy Creeks, navigation has become difficult for recreational users (Johnny Carlin, West Tennessee River Basin Authority, oral commun., 1998). As the low-gradient alluvial system of the Hatchie River accumulates sediment, another common outcome has been the formation of valley plugs, areas where 'channels are filled with sediment, and all the additional bedload brought downstream is then spread out over the flood plain until a new channel has been formed' (Happ, 1975). Valley plugs typically form where the slope of a sand-laden tributary decreases downstream, or where the tributary joins its parent stream (Happ and others, 1940; Diehl, 1994, 1997; Smith and Diehl, 2000).

Mississippi, Tennessee

Effects of storm-water runoff on local ground-water quality, Clarksville, Tennessee

Storm-related water-quality data were collected at a drainage-well site and at a spring site in Clarksville, Tennessee, to define the effects of storm-water runoff on the quality of ground water in the area. A dye-trace test verified the direct hydraulic connection between the drainage well and Mobley Spring. Samples of storm run off and spring flow were collected at these sites for nine storms during the period February to October 1988. Water samples were collected also from Mobley Spring and two other springs and two observation wells in the area during dry-weather conditions to assess the general quality of ground water in an urban karst terrain. Evaluation of the effect of storm-water runoff on the quality of local ground water is complicated by the presence of other sources of contaminants in the area Concentrations and load for most major constituents were much smaller in storm-water runoff at the drainage well than in the discharge of Mobley Spring, indicating that much of the chemical constituent load discharged from the spring comes from sources other than the drainage well. However, for some of the minor constituents associated with roadway runoff (arsenic, copper, lead, organic carbon, and oil and grease), the drainage well contributed relatively large amounts of these constituents to local ground water during storms. The close correlation between concentrations of total organic carbon and concentrations of most trace metals at the drainage-well and Mobley Spring sites indicates that these constituents are transported together. Many trace metals were flushed early during each runoff event. Mean storm loads for copper, lead, zinc, and four nutrient species (total nitrogen, ammonia nitrogen, total phosphorus, and orthophosphorus) in storm-water runoff at the drainage-well site were lower than mean storm load predicted from an existing regression model. The overprediction by the model may be a result of the small size of the drainage area relative to the range of drainage areas used in the development of the models, or to the below-normal amounts of rainfall during the period of sampling for this investigation. Loads& in storm-water runoff for 22 constituents were extrapolated from sampled storms to total loads for the period February to October 1988. Calculated loads for trace metals for the period ranged from 0.030pound.s for cadmium to 12pound.s for strontium. Loads of the primary nutrients ranged from 0.97pounds for nitrite as nitrogen to 34pounds of organic nitrogen. Storm-water quality at the drainage-well and Mobley Spring sites was compared to background water quality of the local aquifer; as characterized by dry-weather samples from three springs and two observation wells in the Clarksville area. Concentrations of total-recoverable cadmium, chromium, copper, lead, and nickel were higher in many stormwater samples from both the drainage-well and Mobley Spring sites than in samples from any other site. In addition, concentrations of total organic carbon, methylene blue active substances, and total-recoverable oil and grease were generally higher in storm-water samples from the drainage-well site than in any ground-water sample. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total recoverable iron, manganese, and methylene blue active substances in storm samples from the drainage-well site exceeded the maximum contaminant levels listed in Tennessee’s drinking-water standards (1988) by as much as 2,500 and 5,500 colonies per 100 milliliters, and 2.7, 0.29, and 0.05 milligrams per liter, respectively. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total-recoverable iron, manganese, and lead in storm samples from Mobley Spring exceeded the maximum contaminant levels by as much as 500 and 4,500 colonies per 100 milliliters, and 18.7,0.65, and 0.02 milligrams per liter, respectively. For iron, manganese, and bacteria, these undesirable levels are not necessarily attributable to storm-water recharge, because concentrations of these constituents also exceeded drinking-water standards in one or more of the dry-weather samples from selected springs and observation wells in the area.

Tennessee

Exploring the science and data foundation for Federal public lands decisions

Public lands provide diverse resources, values, and services worldwide. Laws and policies typically require consideration of science in public lands decisions, and resource managers are committed to science-informed decision-making. However, it can be challenging for managers to use, and document the use of, science and data in their decisions. To better understand science and data use in Federal public lands decisions in the United States, we assessed the number, type, and age of documents cited in 70 Environmental Assessments (EAs) completed by the Bureau of Land Management (BLM) in Colorado from 2015–2019. We focused on the BLM, as they manage the largest area of public lands in the United States. We selected Colorado as our study area, as actions proposed on BLM lands in Colorado are representative of those across the nation. Fifty percent of citations were categorized as science and 23% as data. EAs contained an average of 17 citations (range 0–111), with documents analyzing effects of oil and gas development and recreation actions including the highest and lowest mean number of citations (41 and 6, respectively). Of individual resource analysis sections within EAs, 24% contained ≥1 science citation and 21% contained ≥1 data citation. Journal articles were the most cited type of document (26% of citations) followed by non-BLM inventories (13%). Forty-seven percent of citations were relatively recent (2010 or later); the oldest citation was from 1927. Commonly analyzed resources with the highest mean number of citations were socioeconomics, mineral resources, and noise. Fourteen of 33 commonly analyzed resources included <1 citation on average. Actions and resources with no or few citations represent opportunities for strengthening the transparent use of science and data in public lands decision-making.

Colorado

Channel morphology and large wood control postfire debris-flow erosion and deposition

Runoff-generated debris flows are a known response to wildfire, and accurately predicting the volume of these debris flows is important for estimating the magnitude of downstream hazards. Prior data collection efforts have focused on debris-flow volume measurements at catchment outlets, but few studies have considered how erosion and deposition modulate the volume of sediment arriving at catchment outlets. This study takes advantage of a high-resolution dataset to document the factors that control the total debris-flow volume reaching the catchment outlet during a fatal postfire debris flow. Using pre- and post-event airborne lidar, satellite imagery and field mapping, we found that a postfire debris flow in the Black Hollow catchment in northern Colorado eroded 136,000 ± 30,000 m 3 and redeposited 27,000 ± 7,500 m 3 in the main channel. Most of the in-channel deposition (52% by volume) occurred where a confined channel reach transitioned to an unconfined channel reach downstream, allowing the flow to widen and deposit material. Wood jams played multiple roles in the debris-flow dynamics, both nucleating deposition (25% of the deposit volume was stored behind wood jams) and exacerbating erosion (50% of the total erosion occurred downstream from a wood dam break). The remaining deposition occurred due to spatial changes in channel slope as well as deposition observed at newly formed channel bars. Using these data in this study, we identified topographic and vegetation metrics that can be used (pre-event) to anticipate where deposition may occur in channels prior to a debris flow.

Colorado

Estimating groundwater level records using MOVE.1 and computing monthly percentiles from estimated groundwater records in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed record extensions on groundwater levels at select wells using the Maintenance of Variance Extension type 1 (MOVE.1) method. The groundwater levels estimated from these record extensions were used to compute monthly percentiles to improve future determinations of a groundwater index. In Massachusetts, 27 of 29 short-record study wells with continuous groundwater levels between 0.8 and 8.1 years were suitable for record extensions; 37 long-record index wells were used to extend the groundwater level records at the study wells. The index well selected to pair with a study well was chosen based on Pearson correlation coefficient values; cross-correlation between the two wells; geologic and topographic similarity; and smallest distance spanning the wells. Each study well and its corresponding index well have 1 or more years of concurrent, overlapping data; a Pearson correlation coefficient that exceeded a threshold value of 0.8; and a similar aquifer type and hydrologic characteristics. Of the 29 study wells, 2 showed poor correlations with all index wells and were not considered for record extensions. Performance metrics used to assess the accuracy of the MOVE.1 models indicated that most models provided reasonable estimates of groundwater levels. Root mean square error values ranged from 0.097 to 2.292 feet, with a median of 0.536 foot. Nash-Sutcliffe efficiency coefficient values ranged from 0.623 to 0.996, with a median value of 0.759. Generally, study wells in close geographical proximity to their index well resulted in stronger model performance. The average length of groundwater level records was extended by 14.1 years to a new average of 18.1 years. The estimated groundwater level records from the MOVE.1 models resulted in an increase in the range of highest and lowest groundwater levels at 23 of 27 wells. The increase in range of groundwater levels was between 0.08 to 7.95 feet. Monthly percentiles for State drought indices were computed from the estimated MOVE.1 records and observed records through December 31, 2021. Percentiles computed from estimated records show an average groundwater level about 1.0 foot lower than observed data at the 2d percentile and 0.1 foot lower at the 30th percentile.

Massachusetts

Ground-motion characterization for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands

We develop the ground-motion characterization (GMC) for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands (NSHM-PRVI) for earthquakes in active crustal, subduction interface, and subduction intraslab regimes. Using ground-motion models (GMMs) from the Next-Generation Attenuation (NGA)-West2 and NGA-Subduction projects, the GMC is parameterized by scaled-backbone models for median ground motions and by independent logic trees of aleatory variability. We introduce several novel GMC features into the U.S. NSHM: (1) use of regional ground-motion data for modeling median ground motions; (2) development of scaled-backbone models for median ground motions; and (3) development of independent logic trees of aleatory variability from variance components of GMMs and computed from multiple ground-motion datasets, and incorporating regional ground-motion data effects on variability. We compute probabilistic seismic hazard curves and maps to evaluate the contributions from the GMC components and for comparison with the 2003 GMC. Contributions of the GMC to epistemic uncertainty in seismic hazard are evaluated through spatial variations in epistemic uncertainty in hazard maps, comparisons between mean hazard curves and fractiles, as well as investigations of the contributions of logic-tree branches to hazard maps and curves. Comparisons between seismic hazard from the 2025 and 2003 GMCs allow examination of the changes in hazard curves and mapped values with 2% and 10% probabilities of exceedance in 50 years. The 2025 GMC exhibits modest changes in median predictions, relative to the 2003 GMC; overall, values of aleatory variability are higher, except at long periods ( ), resulting in changes to probabilistic ground motions at low probabilities of exceedance (<10% probability of exceedance in 50 years). Changes in hazard at 2% and 10% probabilities of exceedance in 50 years are also relatively modest (within 20%) at most sites, with the impacts from the 2025 GMC exhibiting minor reductions and increases at 0.2 and 1.0 s periods, respectively, relative to the 2003 GMC.

Puerto Rico, U.S. Virgin Islands

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska

Post-glacial stratigraphy and late Holocene record of great Cascadia earthquakes in Ozette Lake, Washington, USA

Ozette Lake is an ~100-m-deep coastal lake located along the outer coast of the Olympic Peninsula (Washington, USA); it is situated above the locked portion of the northern Cascadia megathrust but also relatively isolated from active crustal faults and intraslab earthquakes. Here we present a suite of geophysical and geological evidence for earthquake-triggered mass transport deposits (MTDs) and related turbidite deposition in Ozette Lake since ca. 14 ka. Comprehensive high-resolution bathymetry data, seismic reflection profiles, and sediment cores are used to characterize the post-glacial stratigraphic framework and examine paleoseismic evidence in the lacustrine sediments. Stacked sequences of MTDs along the steep eastern flanks of the lake appear to grade basin-ward from thick, chaotic, blocky masses to thin, parallel-bedded turbidite beds. The discrete turbidite event layers are separated by fine-grained (silt and clay) lake sedimentation. The event layers are observed throughout the lake, but the physical characteristics of the deposits vary considerably depending on proximity to primary depocenters, steep slopes, and subaqueous deltas. A total of 30–34 event deposits are observed in the post-glacial record. Radiometric dating was used to reconstruct a detailed sedimentation history over the last ~5.5 k.y., develop an age model, and estimate the recurrence (365–405 yr) for the most recent 12 event layers. Based on sedimentological characteristics, temporal overlap with other regional paleoseismic chronologies, and recurrence estimates, at least 10 of the dated event layers appear to be sourced from slope failures triggered by intense shaking during megathrust ruptures; the recurrence interval for these 10 events is 440–560 yr. Thus, Ozette Lake contains one of the longest and most robust geological records of repeated shaking along the northern Cascadia subduction zone.

Washington

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report

Egg thiamine concentrations reflect dietary differences between four hatchery strains, including two morphotypes, of Lake Trout in Lake Ontario

Objective Test whether dietary differences among hatchery strains of Lake Trout Salvelinus namaycush were associated with variation in egg thiamine concentrations and assess the potential for using strain-specific traits to mitigate thiamine deficiency complex (TDC) in Lake Ontario restoration efforts. Methods Stomach content analysis and stable isotope mixing models were used to compare diets among four hatchery strains of Lake Trout, representing lean and humper morphotypes. Egg thiamine concentrations were measured to test whether dietary differences correlated with susceptibility to TDC. Results Significant differences in diet and egg thiamine concentrations were observed among Lake Trout strains. A humper-like morphotype strain exhibited elevated thiamine levels, which were associated with reduced consumption of prey known to degrade thiamine levels when consumed, Alewife Alosa pseudoharengus and Rainbow Smelt Osmerus mordax , and increased reliance on Round Goby Neogobius melanostomus or sculpin species (Slimy Sculpin Cottus cognatus and Deepwater Sculpin Myoxocephalus thompsonii ). These findings support the link between the consumption of Alewife and Rainbow Smelt and thiamine deficiency. Conclusions Our findings support a link between strain-specific dietary preferences and susceptibility to TDC in Lake Trout. Preferential stocking of strains less prone to TDC, such as the strain derived from a humper morph from Lake Superior, could enhance restoration success in Lake Ontario. This strategy may be especially effective given the continued dominance of Alewife in the lake's prey base and the current management priorities supporting fisheries for Pacific salmon Oncorhynchus spp.

North American Journal of Fisheries Management

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction Effective communication in the geosciences requires a consistent nomenclature for stratigraphic units and, especially, for divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Geologists from the U.S. Geological Survey (USGS), State geological surveys, academia, and other organizations require a consistent time scale to be used in communicating ages of geo­logic units in the United States. Many international debates have occurred over names and boundaries of units, and various time scales have been used by the geoscience community. For consistent usage of time terms, the USGS Geologic Names Committee and the Association of American State Geologists devel­oped the Divisions of Geologic Time ; the 2018 update in this fact sheet contains the unit names and boundary age estimates ratified by the International Commission on Stratigraphy in 2018. Scientists may use other published time scales, provided that these are specified and referenced.

Fact Sheet

Gaps in water quality modeling of hydrologic systems

This review assesses gaps in water quality modeling, emphasizing opportunities to improve next-generation models that are essential for managing water quality and are integral to meeting goals of scientific and management agencies. In particular, this paper identifies gaps in water quality modeling capabilities that, if addressed, could support assessments, projections, and evaluations of management alternatives to support ecosystem health and human beneficial use of water resources. It covers surface water and groundwater quality modeling, dealing with a broad suite of physical, biogeochemical, and anthropogenic drivers. Modeling capabilities for six constituents (or constituent categories) are explored: water temperature, salinity, nutrients, sediment, geogenic constituents, and contaminants of emerging concern. Each constituent was followed through the coupled atmospheric-hydrologic-human system, with prominent modeling gaps described for a diverse array of relevant inputs, processes, and human activities. Commonly identified modeling gaps primarily fall under three types: (1) model gaps, (2) data gaps, and (3) process understanding gaps. In addition to potential solutions for addressing specific individual modeling limitations, some broad approaches (e.g., enhanced data collection and compilation, machine learning, reduced-complexity modeling) are discussed as ways forward for tackling multiple gaps. This gap analysis establishes a framework of diverse approaches that may support improved process representation, scale, and accuracy of models for a wide range of water quality issues.

Water

Assessment of potential for natural attenuation of chlorinated ethenes and ethanes in ground water at a petrochemical reclamation site, Harris County, Texas

Redox conditions in the Numerous Sand Channels Zone beneath a petrochemical reclamation site in Harris County, Texas, range from sulfate reducing to methanogenic as indicated by the presence of methane in ground water and the range of molecular hydrogen concentrations. Assessment of the potential for reductive dechlorination using BIOCHLOR as a screening tool indicated conditions favoring anaerobic degradation of chlorinated organic compounds in the Numerous Sand Channels Zone. Evidence supporting reductive dechlorination includes apparently biogenic cis -1,2-dichloroethene; an increased ratio of 1,2-dichloroethane to 1,1,2-trichloroethane downgradient from the assumed contaminant source area; ethene and methane concentrations greater than background concentrations within the area of the contaminant plume; and a positive correlation of the ratio of ethene to vinyl chloride as a function of methane concentrations. The body of evidence presented in this report argues for hydrogenolysis of trichloroethene to cis -1,2-dichloroethene; of 1,1,2-trichloroethane to 1,2-dichloroethane; and of vinyl chloride to ethene within the Numerous Sand Channels Zone. Simulations using BIOCHLOR yielded apparent first-order decay constants for reductive dechlorination in the sequence tetrachloroethene trichloroethene cis -1,2-dichloroethene vinyl chloride ethene within the range of literature values reported for each compound and apparent first-order decay constants for reductive dechlorination in the sequence 1,1,2-trichloroethane 1,2-dichloroethane slightly greater than literature values reported for each compound along the upgradient segment of a simulated ground-water flowpath. Except for vinyl chloride, apparent rates of reductive dechlorination for all simulated species show a marked decrease along the downgradient segment of the simulated ground-water flowpath. Evidence for reductive dechlorination of chlorinated ethenes within the Numerous Sand Channels Zone indicates potential for natural attenuation of chlorinated ethenes. Reductive dechlorination of chlorinated ethanes apparently occurs to a lesser extent, indicating relatively less potential for natural attenuation of chlorinated ethanes. Additional data are needed on the concentrations and distribution of chlorinated ethenes and ethanes in individual fine sand intervals of the Numerous Sand Channels Zone. This information, combined with lower minimum reporting levels for future chloroethane analyses, might enable a more complete and quantitative assessment of the potential for natural attenuation at the site.

Texas